valkey-glide 2.0.0rc7__cp39-cp39-macosx_11_0_arm64.whl → 2.1.0__cp39-cp39-macosx_11_0_arm64.whl

{glide → glide_shared}/config.py

@@ -6,12 +6,18 @@ from dataclasses import dataclass
 from enum import Enum, IntEnum
 from typing import Any, Callable, Dict, List, Optional, Set, Tuple, Union
 
-from glide.async_commands.core import CoreCommands
-from glide.exceptions import ConfigurationError
-from glide.protobuf.connection_request_pb2 import ConnectionRequest
-from glide.protobuf.connection_request_pb2 import ProtocolVersion as SentProtocolVersion
-from glide.protobuf.connection_request_pb2 import ReadFrom as ProtobufReadFrom
-from glide.protobuf.connection_request_pb2 import TlsMode
+from glide_shared.commands.core_options import PubSubMsg
+from glide_shared.exceptions import ConfigurationError
+from glide_shared.protobuf.connection_request_pb2 import (
+    ConnectionRequest,
+)
+from glide_shared.protobuf.connection_request_pb2 import (
+    ProtocolVersion as SentProtocolVersion,
+)
+from glide_shared.protobuf.connection_request_pb2 import ReadFrom as ProtobufReadFrom
+from glide_shared.protobuf.connection_request_pb2 import (
+    TlsMode,
+)
 
 
 class NodeAddress:
@@ -73,7 +79,7 @@ class BackoffStrategy:
     """
     Represents the strategy used to determine how and when to reconnect, in case of connection failures.
     The time between attempts grows exponentially, to the formula rand(0 .. factor * (exponentBase ^ N)), where N
-    is the number of failed attempts.
+    is the number of failed attempts, and rand(...) applies a jitter of up to jitter_percent% to introduce randomness and reduce retry storms.
     Once the maximum value is reached, that will remain the time between retry attempts until a reconnect attempt is
     successful.
     The client will attempt to reconnect indefinitely.
@@ -83,6 +89,7 @@ class BackoffStrategy:
             where the time between retries increases. Once the retries have reached the maximum value, the time between
             retries will remain constant until a reconnect attempt is succesful.
         factor (int): The multiplier that will be applied to the waiting time between each retry.
+            This value is specified in milliseconds.
         exponent_base (int): The exponent base configured for the strategy.
         jitter_percent (Optional[int]): The Jitter percent on the calculated duration. If not set, a default value will be used.
     """
@@ -147,25 +154,66 @@ class PeriodicChecksStatus(Enum):
     """
 
 
+class TlsAdvancedConfiguration:
+    """
+    Represents advanced TLS configuration settings.
+
+    Attributes:
+        use_insecure_tls (Optional[bool]): Whether to bypass TLS certificate verification.
+
+            - When set to True, the client skips certificate validation.
+              This is useful when connecting to servers or clusters using self-signed certificates,
+              or when DNS entries (e.g., CNAMEs) don't match certificate hostnames.
+
+            - This setting is typically used in development or testing environments. **It is
+              strongly discouraged in production**, as it introduces security risks such as man-in-the-middle attacks.
+
+            - Only valid if TLS is already enabled in the base client configuration.
+              Enabling it without TLS will result in a `ConfigurationError`.
+
+            - Default: False (verification is enforced).
+    """
+
+    def __init__(self, use_insecure_tls: Optional[bool] = None):
+        self.use_insecure_tls = use_insecure_tls
+
+
 class AdvancedBaseClientConfiguration:
     """
     Represents the advanced configuration settings for a base Glide client.
 
     Attributes:
         connection_timeout (Optional[int]): The duration in milliseconds to wait for a TCP/TLS connection to complete.
-            This applies both during initial client creation and any reconnections that may occur during request processing.
+            This applies both during initial client creation and any reconnection that may occur during request processing.
             **Note**: A high connection timeout may lead to prolonged blocking of the entire command pipeline.
-            If not explicitly set, a default value of 250 milliseconds will be used.
+            If not explicitly set, a default value of 2000 milliseconds will be used.
+        tls_config (Optional[TlsAdvancedConfiguration]): The advanced TLS configuration settings.
+            This allows for more granular control of TLS behavior, such as enabling an insecure mode
+            that bypasses certificate validation.
     """
 
-    def __init__(self, connection_timeout: Optional[int] = None):
+    def __init__(
+        self,
+        connection_timeout: Optional[int] = None,
+        tls_config: Optional[TlsAdvancedConfiguration] = None,
+    ):
         self.connection_timeout = connection_timeout
+        self.tls_config = tls_config
 
     def _create_a_protobuf_conn_request(
         self, request: ConnectionRequest
     ) -> ConnectionRequest:
         if self.connection_timeout:
             request.connection_timeout = self.connection_timeout
+
+        if self.tls_config and self.tls_config.use_insecure_tls:
+            if request.tls_mode == TlsMode.SecureTls:
+                request.tls_mode = TlsMode.InsecureTls
+            elif request.tls_mode == TlsMode.NoTls:
+                raise ConfigurationError(
+                    "use_insecure_tls cannot be enabled when use_tls is disabled."
+                )
+
         return request
 
 
@@ -182,24 +230,27 @@ class BaseClientConfiguration:
             For example::
 
                 [
-                    {address:sample-address-0001.use1.cache.amazonaws.com, port:6379},
-                    {address: sample-address-0002.use2.cache.amazonaws.com, port:6379}
-                ].
+                    NodeAddress("sample-address-0001.use1.cache.amazonaws.com", 6379),
+                    NodeAddress("sample-address-0002.use1.cache.amazonaws.com", 6379)
+                ]
 
         use_tls (bool): True if communication with the cluster should use Transport Level Security.
-            Should match the TLS configuration of the server/cluster, otherwise the connection attempt will fail
+            Should match the TLS configuration of the server/cluster, otherwise the connection attempt will fail.
+            For advanced tls configuration, please use `AdvancedBaseClientConfiguration`.
         credentials (ServerCredentials): Credentials for authentication process.
             If none are set, the client will not authenticate itself with the server.
         read_from (ReadFrom): If not set, `PRIMARY` will be used.
         request_timeout (Optional[int]): The duration in milliseconds that the client should wait for a request to
             complete.
             This duration encompasses sending the request, awaiting for a response from the server, and any required
-            reconnections or retries.
+            reconnection or retries.
             If the specified timeout is exceeded for a pending request, it will result in a timeout error. If not
             explicitly set, a default value of 250 milliseconds will be used.
         reconnect_strategy (Optional[BackoffStrategy]): Strategy used to determine how and when to reconnect, in case of
             connection failures.
             If not set, a default backoff strategy will be used.
+        database_id (Optional[int]): Index of the logical database to connect to.
+            Must be a non-negative integer.If not set, the client will connect to database 0.
         client_name (Optional[str]): Client name to be used for the client. Will be used with CLIENT SETNAME command
             during connection establishment.
         protocol (ProtocolVersion): Serialization protocol to be used. If not set, `RESP3` will be used.
@@ -214,6 +265,25 @@ class BaseClientConfiguration:
             If ReadFrom strategy is AZAffinityReplicasAndPrimary, this setting ensures that readonly commands are directed
             to nodes (first replicas then primary) within the specified AZ if they exist.
         advanced_config (Optional[AdvancedBaseClientConfiguration]): Advanced configuration settings for the client.
+
+        lazy_connect (Optional[bool]): Enables lazy connection mode, where physical connections to the server(s)
+            are deferred until the first command is sent. This can reduce startup latency and allow for client
+            creation in disconnected environments.
+
+            When set to `True`, the client will not attempt to connect to the specified nodes during
+            initialization. Instead, connections will be established only when a command is actually executed.
+
+            Note that the first command executed with lazy connections may experience additional latency
+            as it needs to establish the connection first. During this initial connection, the standard
+            request timeout does not apply yet - instead, the connection establishment is governed by
+            `AdvancedBaseClientConfiguration.connection_timeout`. The request timeout (`request_timeout`)
+            only begins counting after the connection has been successfully established. This behavior
+            can effectively increase the total time needed for the first command to complete.
+
+            This setting applies to both standalone and cluster modes. Note that if an operation is
+            attempted and connection fails (e.g., unreachable nodes), errors will surface at that point.
+
+            If not set, connections are established immediately during client creation (equivalent to `False`).
     """
 
     def __init__(
@@ -224,11 +294,13 @@ class BaseClientConfiguration:
         read_from: ReadFrom = ReadFrom.PRIMARY,
         request_timeout: Optional[int] = None,
         reconnect_strategy: Optional[BackoffStrategy] = None,
+        database_id: Optional[int] = None,
         client_name: Optional[str] = None,
         protocol: ProtocolVersion = ProtocolVersion.RESP3,
         inflight_requests_limit: Optional[int] = None,
         client_az: Optional[str] = None,
         advanced_config: Optional[AdvancedBaseClientConfiguration] = None,
+        lazy_connect: Optional[bool] = None,
     ):
         self.addresses = addresses
         self.use_tls = use_tls
@@ -236,11 +308,13 @@ class BaseClientConfiguration:
         self.read_from = read_from
         self.request_timeout = request_timeout
         self.reconnect_strategy = reconnect_strategy
+        self.database_id = database_id
         self.client_name = client_name
         self.protocol = protocol
         self.inflight_requests_limit = inflight_requests_limit
         self.client_az = client_az
         self.advanced_config = advanced_config
+        self.lazy_connect = lazy_connect
 
         if read_from == ReadFrom.AZ_AFFINITY and not client_az:
             raise ValueError(
@@ -252,6 +326,39 @@ class BaseClientConfiguration:
                 "client_az must be set when read_from is set to AZ_AFFINITY_REPLICAS_AND_PRIMARY"
             )
 
+    def _set_addresses_in_request(self, request: ConnectionRequest) -> None:
+        """Set addresses in the protobuf request."""
+        for address in self.addresses:
+            address_info = request.addresses.add()
+            address_info.host = address.host
+            address_info.port = address.port
+
+    def _set_reconnect_strategy_in_request(self, request: ConnectionRequest) -> None:
+        """Set reconnect strategy in the protobuf request."""
+        if not self.reconnect_strategy:
+            return
+
+        request.connection_retry_strategy.number_of_retries = (
+            self.reconnect_strategy.num_of_retries
+        )
+        request.connection_retry_strategy.factor = self.reconnect_strategy.factor
+        request.connection_retry_strategy.exponent_base = (
+            self.reconnect_strategy.exponent_base
+        )
+        if self.reconnect_strategy.jitter_percent is not None:
+            request.connection_retry_strategy.jitter_percent = (
+                self.reconnect_strategy.jitter_percent
+            )
+
+    def _set_credentials_in_request(self, request: ConnectionRequest) -> None:
+        """Set credentials in the protobuf request."""
+        if not self.credentials:
+            return
+
+        if self.credentials.username:
+            request.authentication_info.username = self.credentials.username
+        request.authentication_info.password = self.credentials.password
+
     def _create_a_protobuf_conn_request(
         self, cluster_mode: bool = False
     ) -> ConnectionRequest:
@@ -265,41 +372,33 @@ class BaseClientConfiguration:
             ConnectionRequest: Protobuf ConnectionRequest.
         """
         request = ConnectionRequest()
-        for address in self.addresses:
-            address_info = request.addresses.add()
-            address_info.host = address.host
-            address_info.port = address.port
+
+        # Set basic configuration
+        self._set_addresses_in_request(request)
         request.tls_mode = TlsMode.SecureTls if self.use_tls else TlsMode.NoTls
         request.read_from = self.read_from.value
+        request.cluster_mode_enabled = cluster_mode
+        request.protocol = self.protocol.value
+
+        # Set optional configuration
         if self.request_timeout:
             request.request_timeout = self.request_timeout
-        if self.reconnect_strategy:
-            request.connection_retry_strategy.number_of_retries = (
-                self.reconnect_strategy.num_of_retries
-            )
-            request.connection_retry_strategy.factor = self.reconnect_strategy.factor
-            request.connection_retry_strategy.exponent_base = (
-                self.reconnect_strategy.exponent_base
-            )
-            if self.reconnect_strategy.jitter_percent is not None:
-                request.connection_retry_strategy.jitter_percent = (
-                    self.reconnect_strategy.jitter_percent
-                )
 
-        request.cluster_mode_enabled = True if cluster_mode else False
-        if self.credentials:
-            if self.credentials.username:
-                request.authentication_info.username = self.credentials.username
-            request.authentication_info.password = self.credentials.password
+        self._set_reconnect_strategy_in_request(request)
+        self._set_credentials_in_request(request)
+
         if self.client_name:
             request.client_name = self.client_name
-        request.protocol = self.protocol.value
         if self.inflight_requests_limit:
             request.inflight_requests_limit = self.inflight_requests_limit
         if self.client_az:
             request.client_az = self.client_az
+        if self.database_id is not None:
+            request.database_id = self.database_id
         if self.advanced_config:
             self.advanced_config._create_a_protobuf_conn_request(request)
+        if self.lazy_connect is not None:
+            request.lazy_connect = self.lazy_connect
 
         return request
 
@@ -308,7 +407,7 @@ class BaseClientConfiguration:
 
     def _get_pubsub_callback_and_context(
         self,
-    ) -> Tuple[Optional[Callable[[CoreCommands.PubSubMsg, Any], None]], Any]:
+    ) -> Tuple[Optional[Callable[[PubSubMsg, Any], None]], Any]:
         return None, None
 
 
@@ -317,9 +416,13 @@ class AdvancedGlideClientConfiguration(AdvancedBaseClientConfiguration):
     Represents the advanced configuration settings for a Standalone Glide client.
     """
 
-    def __init__(self, connection_timeout: Optional[int] = None):
+    def __init__(
+        self,
+        connection_timeout: Optional[int] = None,
+        tls_config: Optional[TlsAdvancedConfiguration] = None,
+    ):
 
-        super().__init__(connection_timeout)
+        super().__init__(connection_timeout, tls_config)
 
 
 class GlideClientConfiguration(BaseClientConfiguration):
@@ -328,27 +431,28 @@ class GlideClientConfiguration(BaseClientConfiguration):
 
     Attributes:
         addresses (List[NodeAddress]): DNS Addresses and ports of known nodes in the cluster.
-        Only nodes whose addresses were provided will be used by the client.
+            Only nodes whose addresses were provided will be used by the client.
             For example::
 
                 [
-                    {address:sample-address-0001.use1.cache.amazonaws.com, port:6379},
-                    {address: sample-address-0002.use2.cache.amazonaws.com, port:6379}
+                    NodeAddress("sample-address-0001.use1.cache.amazonaws.com", 6379),
+                    NodeAddress("sample-address-0002.use1.cache.amazonaws.com", 6379)
                 ]
 
         use_tls (bool): True if communication with the cluster should use Transport Level Security.
+                Please use `AdvancedGlideClusterClientConfiguration`.
         credentials (ServerCredentials): Credentials for authentication process.
                 If none are set, the client will not authenticate itself with the server.
         read_from (ReadFrom): If not set, `PRIMARY` will be used.
         request_timeout (Optional[int]):  The duration in milliseconds that the client should wait for a request to complete.
                 This duration encompasses sending the request, awaiting for a response from the server, and any required
-                reconnections or retries.
+                reconnection or retries.
                 If the specified timeout is exceeded for a pending request, it will result in a timeout error.
                 If not explicitly set, a default value of 250 milliseconds will be used.
         reconnect_strategy (Optional[BackoffStrategy]): Strategy used to determine how and when to reconnect, in case of
             connection failures.
             If not set, a default backoff strategy will be used.
-        database_id (Optional[int]): index of the logical database to connect to.
+        database_id (Optional[int]): Index of the logical database to connect to.
         client_name (Optional[str]): Client name to be used for the client. Will be used with CLIENT SETNAME command during
             connection establishment.
         protocol (ProtocolVersion): The version of the RESP protocol to communicate with the server.
@@ -387,7 +491,7 @@ class GlideClientConfiguration(BaseClientConfiguration):
         Attributes:
             channels_and_patterns (Dict[GlideClientConfiguration.PubSubChannelModes, Set[str]]):
                 Channels and patterns by modes.
-            callback (Optional[Callable[[CoreCommands.PubSubMsg, Any], None]]):
+            callback (Optional[Callable[[PubSubMsg, Any], None]]):
                 Optional callback to accept the incomming messages.
             context (Any):
                 Arbitrary context to pass to the callback.
@@ -396,7 +500,7 @@ class GlideClientConfiguration(BaseClientConfiguration):
         channels_and_patterns: Dict[
             GlideClientConfiguration.PubSubChannelModes, Set[str]
         ]
-        callback: Optional[Callable[[CoreCommands.PubSubMsg, Any], None]]
+        callback: Optional[Callable[[PubSubMsg, Any], None]]
         context: Any
 
     def __init__(
@@ -414,6 +518,7 @@ class GlideClientConfiguration(BaseClientConfiguration):
         inflight_requests_limit: Optional[int] = None,
         client_az: Optional[str] = None,
         advanced_config: Optional[AdvancedGlideClientConfiguration] = None,
+        lazy_connect: Optional[bool] = None,
     ):
         super().__init__(
             addresses=addresses,
@@ -422,13 +527,14 @@ class GlideClientConfiguration(BaseClientConfiguration):
             read_from=read_from,
             request_timeout=request_timeout,
             reconnect_strategy=reconnect_strategy,
+            database_id=database_id,
             client_name=client_name,
             protocol=protocol,
             inflight_requests_limit=inflight_requests_limit,
             client_az=client_az,
             advanced_config=advanced_config,
+            lazy_connect=lazy_connect,
         )
-        self.database_id = database_id
         self.pubsub_subscriptions = pubsub_subscriptions
 
     def _create_a_protobuf_conn_request(
@@ -436,8 +542,6 @@ class GlideClientConfiguration(BaseClientConfiguration):
     ) -> ConnectionRequest:
         assert cluster_mode is False
         request = super()._create_a_protobuf_conn_request(cluster_mode)
-        if self.database_id:
-            request.database_id = self.database_id
 
         if self.pubsub_subscriptions:
             if self.protocol == ProtocolVersion.RESP2:
@@ -468,7 +572,7 @@ class GlideClientConfiguration(BaseClientConfiguration):
 
     def _get_pubsub_callback_and_context(
         self,
-    ) -> Tuple[Optional[Callable[[CoreCommands.PubSubMsg, Any], None]], Any]:
+    ) -> Tuple[Optional[Callable[[PubSubMsg, Any], None]], Any]:
         if self.pubsub_subscriptions:
             return self.pubsub_subscriptions.callback, self.pubsub_subscriptions.context
         return None, None
@@ -479,8 +583,12 @@ class AdvancedGlideClusterClientConfiguration(AdvancedBaseClientConfiguration):
     Represents the advanced configuration settings for a Glide Cluster client.
     """
 
-    def __init__(self, connection_timeout: Optional[int] = None):
-        super().__init__(connection_timeout)
+    def __init__(
+        self,
+        connection_timeout: Optional[int] = None,
+        tls_config: Optional[TlsAdvancedConfiguration] = None,
+    ):
+        super().__init__(connection_timeout, tls_config)
 
 
 class GlideClusterClientConfiguration(BaseClientConfiguration):
@@ -493,21 +601,23 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
             For example::
 
                 [
-                    {address:configuration-endpoint.use1.cache.amazonaws.com, port:6379}
+                    NodeAddress("sample-address-0001.use1.cache.amazonaws.com", 6379),
                 ]
 
         use_tls (bool): True if communication with the cluster should use Transport Level Security.
+                For advanced tls configuration, please use `AdvancedGlideClusterClientConfiguration`.
         credentials (ServerCredentials): Credentials for authentication process.
                 If none are set, the client will not authenticate itself with the server.
         read_from (ReadFrom): If not set, `PRIMARY` will be used.
         request_timeout (Optional[int]):  The duration in milliseconds that the client should wait for a request to complete.
             This duration encompasses sending the request, awaiting for a response from the server, and any required
-            reconnections or retries.
+            reconnection or retries.
             If the specified timeout is exceeded for a pending request, it will result in a timeout error. If not explicitly
             set, a default value of 250 milliseconds will be used.
         reconnect_strategy (Optional[BackoffStrategy]): Strategy used to determine how and when to reconnect, in case of
             connection failures.
             If not set, a default backoff strategy will be used.
+        database_id (Optional[int]): Index of the logical database to connect to.
         client_name (Optional[str]): Client name to be used for the client. Will be used with CLIENT SETNAME command during
             connection establishment.
         protocol (ProtocolVersion): The version of the RESP protocol to communicate with the server.
@@ -557,7 +667,7 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
         Attributes:
             channels_and_patterns (Dict[GlideClusterClientConfiguration.PubSubChannelModes, Set[str]]):
                 Channels and patterns by modes.
-            callback (Optional[Callable[[CoreCommands.PubSubMsg, Any], None]]):
+            callback (Optional[Callable[[PubSubMsg, Any], None]]):
                 Optional callback to accept the incoming messages.
             context (Any):
                 Arbitrary context to pass to the callback.
@@ -566,7 +676,7 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
         channels_and_patterns: Dict[
             GlideClusterClientConfiguration.PubSubChannelModes, Set[str]
         ]
-        callback: Optional[Callable[[CoreCommands.PubSubMsg, Any], None]]
+        callback: Optional[Callable[[PubSubMsg, Any], None]]
         context: Any
 
     def __init__(
@@ -577,6 +687,7 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
         read_from: ReadFrom = ReadFrom.PRIMARY,
         request_timeout: Optional[int] = None,
         reconnect_strategy: Optional[BackoffStrategy] = None,
+        database_id: Optional[int] = None,
         client_name: Optional[str] = None,
         protocol: ProtocolVersion = ProtocolVersion.RESP3,
         periodic_checks: Union[
@@ -586,6 +697,7 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
         inflight_requests_limit: Optional[int] = None,
         client_az: Optional[str] = None,
         advanced_config: Optional[AdvancedGlideClusterClientConfiguration] = None,
+        lazy_connect: Optional[bool] = None,
     ):
         super().__init__(
             addresses=addresses,
@@ -594,11 +706,13 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
             read_from=read_from,
             request_timeout=request_timeout,
             reconnect_strategy=reconnect_strategy,
+            database_id=database_id,
             client_name=client_name,
             protocol=protocol,
             inflight_requests_limit=inflight_requests_limit,
             client_az=client_az,
             advanced_config=advanced_config,
+            lazy_connect=lazy_connect,
         )
         self.periodic_checks = periodic_checks
         self.pubsub_subscriptions = pubsub_subscriptions
@@ -637,6 +751,8 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
                 for channel_pattern in channels_patterns:
                     entry.channels_or_patterns.append(str.encode(channel_pattern))
 
+        if self.lazy_connect is not None:
+            request.lazy_connect = self.lazy_connect
         return request
 
     def _is_pubsub_configured(self) -> bool:
@@ -644,7 +760,7 @@ class GlideClusterClientConfiguration(BaseClientConfiguration):
 
     def _get_pubsub_callback_and_context(
         self,
-    ) -> Tuple[Optional[Callable[[CoreCommands.PubSubMsg, Any], None]], Any]:
+    ) -> Tuple[Optional[Callable[[PubSubMsg, Any], None]], Any]:
         if self.pubsub_subscriptions:
             return self.pubsub_subscriptions.callback, self.pubsub_subscriptions.context
         return None, None

{glide → glide_shared}/constants.py

@@ -2,9 +2,9 @@
 
 from typing import Any, Dict, List, Literal, Mapping, Optional, Set, TypeVar, Union
 
-from glide.protobuf.command_request_pb2 import CommandRequest
-from glide.protobuf.connection_request_pb2 import ConnectionRequest
-from glide.routes import ByAddressRoute, RandomNode, SlotIdRoute, SlotKeyRoute
+from glide_shared.protobuf.command_request_pb2 import CommandRequest
+from glide_shared.protobuf.connection_request_pb2 import ConnectionRequest
+from glide_shared.routes import ByAddressRoute, RandomNode, SlotIdRoute, SlotKeyRoute
 
 OK: str = "OK"
 DEFAULT_READ_BYTES_SIZE: int = pow(2, 16)

{glide → glide_shared}/exceptions.py

@@ -1,6 +1,8 @@
 # Copyright Valkey GLIDE Project Contributors - SPDX Identifier: Apache-2.0
 
-from typing import Optional
+from typing import Optional, Type
+
+from glide_shared.protobuf.response_pb2 import RequestErrorType
 
 
 class GlideError(Exception):
@@ -60,3 +62,27 @@ class ConfigurationError(RequestError):
     """
     Errors that are thrown when a request cannot be completed in current configuration settings.
     """
+
+    pass
+
+
+class LoggerError(GlideError):
+    """
+    Errors that are thrown when the logger has an error initializing.
+    """
+
+    pass
+
+
+def get_request_error_class(
+    error_type: Optional[RequestErrorType.ValueType],
+) -> Type[RequestError]:
+    if error_type == RequestErrorType.Disconnect:
+        return ConnectionError
+    if error_type == RequestErrorType.ExecAbort:
+        return ExecAbortError
+    if error_type == RequestErrorType.Timeout:
+        return TimeoutError
+    if error_type == RequestErrorType.Unspecified:
+        return RequestError
+    return RequestError

glide_shared/protobuf/command_request_pb2.py

@@ -0,0 +1,54 @@
+# -*- coding: utf-8 -*-
+# Generated by the protocol buffer compiler.  DO NOT EDIT!
+# source: protobuf/command_request.proto
+# Protobuf Python Version: 4.25.1
+"""Generated protocol buffer code."""
+from google.protobuf import descriptor as _descriptor
+from google.protobuf import descriptor_pool as _descriptor_pool
+from google.protobuf import symbol_database as _symbol_database
+from google.protobuf.internal import builder as _builder
+# @@protoc_insertion_point(imports)
+
+_sym_db = _symbol_database.Default()
+
+
+
+
+DESCRIPTOR = _descriptor_pool.Default().AddSerializedFile(b'\n\x1eprotobuf/command_request.proto\x12\x0f\x63ommand_request\"M\n\x0bSlotIdRoute\x12-\n\tslot_type\x18\x01 \x01(\x0e\x32\x1a.command_request.SlotTypes\x12\x0f\n\x07slot_id\x18\x02 \x01(\x05\"O\n\x0cSlotKeyRoute\x12-\n\tslot_type\x18\x01 \x01(\x0e\x32\x1a.command_request.SlotTypes\x12\x10\n\x08slot_key\x18\x02 \x01(\t\",\n\x0e\x42yAddressRoute\x12\x0c\n\x04host\x18\x01 \x01(\t\x12\x0c\n\x04port\x18\x02 \x01(\x05\"\xf6\x01\n\x06Routes\x12\x36\n\rsimple_routes\x18\x01 \x01(\x0e\x32\x1d.command_request.SimpleRoutesH\x00\x12\x37\n\x0eslot_key_route\x18\x02 \x01(\x0b\x32\x1d.command_request.SlotKeyRouteH\x00\x12\x35\n\rslot_id_route\x18\x03 \x01(\x0b\x32\x1c.command_request.SlotIdRouteH\x00\x12;\n\x10\x62y_address_route\x18\x04 \x01(\x0b\x32\x1f.command_request.ByAddressRouteH\x00\x42\x07\n\x05value\"\xb6\x01\n\x07\x43ommand\x12\x32\n\x0crequest_type\x18\x01 \x01(\x0e\x32\x1c.command_request.RequestType\x12\x38\n\nargs_array\x18\x02 \x01(\x0b\x32\".command_request.Command.ArgsArrayH\x00\x12\x1a\n\x10\x61rgs_vec_pointer\x18\x03 \x01(\x04H\x00\x1a\x19\n\tArgsArray\x12\x0c\n\x04\x61rgs\x18\x01 \x03(\x0c\x42\x06\n\x04\x61rgs\"\x80\x01\n\x18ScriptInvocationPointers\x12\x0c\n\x04hash\x18\x01 \x01(\t\x12\x19\n\x0ckeys_pointer\x18\x02 \x01(\x04H\x00\x88\x01\x01\x12\x19\n\x0c\x61rgs_pointer\x18\x03 \x01(\x04H\x01\x88\x01\x01\x42\x0f\n\r_keys_pointerB\x0f\n\r_args_pointer\"<\n\x10ScriptInvocation\x12\x0c\n\x04hash\x18\x01 \x01(\t\x12\x0c\n\x04keys\x18\x02 \x03(\x0c\x12\x0c\n\x04\x61rgs\x18\x03 \x03(\x0c\"\x90\x02\n\x05\x42\x61tch\x12\x11\n\tis_atomic\x18\x01 \x01(\x08\x12*\n\x08\x63ommands\x18\x02 \x03(\x0b\x32\x18.command_request.Command\x12\x1b\n\x0eraise_on_error\x18\x03 \x01(\x08H\x00\x88\x01\x01\x12\x14\n\x07timeout\x18\x04 \x01(\rH\x01\x88\x01\x01\x12\x1f\n\x12retry_server_error\x18\x05 \x01(\x08H\x02\x88\x01\x01\x12#\n\x16retry_connection_error\x18\x06 \x01(\x08H\x03\x88\x01\x01\x42\x11\n\x0f_raise_on_errorB\n\n\x08_timeoutB\x15\n\x13_retry_server_errorB\x19\n\x17_retry_connection_error\"\xb4\x01\n\x0b\x43lusterScan\x12\x0e\n\x06\x63ursor\x18\x01 \x01(\t\x12\x1a\n\rmatch_pattern\x18\x02 \x01(\x0cH\x00\x88\x01\x01\x12\x12\n\x05\x63ount\x18\x03 \x01(\x03H\x01\x88\x01\x01\x12\x18\n\x0bobject_type\x18\x04 \x01(\tH\x02\x88\x01\x01\x12\x1f\n\x17\x61llow_non_covered_slots\x18\x05 \x01(\x08\x42\x10\n\x0e_match_patternB\x08\n\x06_countB\x0e\n\x0c_object_type\"V\n\x18UpdateConnectionPassword\x12\x15\n\x08password\x18\x01 \x01(\tH\x00\x88\x01\x01\x12\x16\n\x0eimmediate_auth\x18\x02 \x01(\x08\x42\x0b\n\t_password\"\xfc\x03\n\x0e\x43ommandRequest\x12\x14\n\x0c\x63\x61llback_idx\x18\x01 \x01(\r\x12\x32\n\x0esingle_command\x18\x02 \x01(\x0b\x32\x18.command_request.CommandH\x00\x12\'\n\x05\x62\x61tch\x18\x03 \x01(\x0b\x32\x16.command_request.BatchH\x00\x12>\n\x11script_invocation\x18\x04 \x01(\x0b\x32!.command_request.ScriptInvocationH\x00\x12O\n\x1ascript_invocation_pointers\x18\x05 \x01(\x0b\x32).command_request.ScriptInvocationPointersH\x00\x12\x34\n\x0c\x63luster_scan\x18\x06 \x01(\x0b\x32\x1c.command_request.ClusterScanH\x00\x12O\n\x1aupdate_connection_password\x18\x07 \x01(\x0b\x32).command_request.UpdateConnectionPasswordH\x00\x12&\n\x05route\x18\x08 \x01(\x0b\x32\x17.command_request.Routes\x12\x1a\n\rroot_span_ptr\x18\t \x01(\x04H\x01\x88\x01\x01\x42\t\n\x07\x63ommandB\x10\n\x0e_root_span_ptr*:\n\x0cSimpleRoutes\x12\x0c\n\x08\x41llNodes\x10\x00\x12\x10\n\x0c\x41llPrimaries\x10\x01\x12\n\n\x06Random\x10\x02*%\n\tSlotTypes\x12\x0b\n\x07Primary\x10\x00\x12\x0b\n\x07Replica\x10\x01*\xea\x30\n\x0bRequestType\x12\x12\n\x0eInvalidRequest\x10\x00\x12\x11\n\rCustomCommand\x10\x01\x12\x0c\n\x08\x42itCount\x10\x65\x12\x0c\n\x08\x42itField\x10\x66\x12\x14\n\x10\x42itFieldReadOnly\x10g\x12\t\n\x05\x42itOp\x10h\x12\n\n\x06\x42itPos\x10i\x12\n\n\x06GetBit\x10j\x12\n\n\x06SetBit\x10k\x12\x0b\n\x06\x41sking\x10\xc9\x01\x12\x14\n\x0f\x43lusterAddSlots\x10\xca\x01\x12\x19\n\x14\x43lusterAddSlotsRange\x10\xcb\x01\x12\x15\n\x10\x43lusterBumpEpoch\x10\xcc\x01\x12\x1f\n\x1a\x43lusterCountFailureReports\x10\xcd\x01\x12\x1b\n\x16\x43lusterCountKeysInSlot\x10\xce\x01\x12\x14\n\x0f\x43lusterDelSlots\x10\xcf\x01\x12\x19\n\x14\x43lusterDelSlotsRange\x10\xd0\x01\x12\x14\n\x0f\x43lusterFailover\x10\xd1\x01\x12\x16\n\x11\x43lusterFlushSlots\x10\xd2\x01\x12\x12\n\rClusterForget\x10\xd3\x01\x12\x19\n\x14\x43lusterGetKeysInSlot\x10\xd4\x01\x12\x10\n\x0b\x43lusterInfo\x10\xd5\x01\x12\x13\n\x0e\x43lusterKeySlot\x10\xd6\x01\x12\x11\n\x0c\x43lusterLinks\x10\xd7\x01\x12\x10\n\x0b\x43lusterMeet\x10\xd8\x01\x12\x10\n\x0b\x43lusterMyId\x10\xd9\x01\x12\x15\n\x10\x43lusterMyShardId\x10\xda\x01\x12\x11\n\x0c\x43lusterNodes\x10\xdb\x01\x12\x14\n\x0f\x43lusterReplicas\x10\xdc\x01\x12\x15\n\x10\x43lusterReplicate\x10\xdd\x01\x12\x11\n\x0c\x43lusterReset\x10\xde\x01\x12\x16\n\x11\x43lusterSaveConfig\x10\xdf\x01\x12\x1a\n\x15\x43lusterSetConfigEpoch\x10\xe0\x01\x12\x13\n\x0e\x43lusterSetslot\x10\xe1\x01\x12\x12\n\rClusterShards\x10\xe2\x01\x12\x12\n\rClusterSlaves\x10\xe3\x01\x12\x11\n\x0c\x43lusterSlots\x10\xe4\x01\x12\r\n\x08ReadOnly\x10\xe5\x01\x12\x0e\n\tReadWrite\x10\xe6\x01\x12\t\n\x04\x41uth\x10\xad\x02\x12\x12\n\rClientCaching\x10\xae\x02\x12\x12\n\rClientGetName\x10\xaf\x02\x12\x13\n\x0e\x43lientGetRedir\x10\xb0\x02\x12\r\n\x08\x43lientId\x10\xb1\x02\x12\x0f\n\nClientInfo\x10\xb2\x02\x12\x15\n\x10\x43lientKillSimple\x10\xb3\x02\x12\x0f\n\nClientKill\x10\xb4\x02\x12\x0f\n\nClientList\x10\xb5\x02\x12\x12\n\rClientNoEvict\x10\xb6\x02\x12\x12\n\rClientNoTouch\x10\xb7\x02\x12\x10\n\x0b\x43lientPause\x10\xb8\x02\x12\x10\n\x0b\x43lientReply\x10\xb9\x02\x12\x12\n\rClientSetInfo\x10\xba\x02\x12\x12\n\rClientSetName\x10\xbb\x02\x12\x13\n\x0e\x43lientTracking\x10\xbc\x02\x12\x17\n\x12\x43lientTrackingInfo\x10\xbd\x02\x12\x12\n\rClientUnblock\x10\xbe\x02\x12\x12\n\rClientUnpause\x10\xbf\x02\x12\t\n\x04\x45\x63ho\x10\xc0\x02\x12\n\n\x05Hello\x10\xc1\x02\x12\t\n\x04Ping\x10\xc2\x02\x12\t\n\x04Quit\x10\xc3\x02\x12\n\n\x05Reset\x10\xc4\x02\x12\x0b\n\x06Select\x10\xc5\x02\x12\t\n\x04\x43opy\x10\x91\x03\x12\x08\n\x03\x44\x65l\x10\x92\x03\x12\t\n\x04\x44ump\x10\x93\x03\x12\x0b\n\x06\x45xists\x10\x94\x03\x12\x0b\n\x06\x45xpire\x10\x95\x03\x12\r\n\x08\x45xpireAt\x10\x96\x03\x12\x0f\n\nExpireTime\x10\x97\x03\x12\t\n\x04Keys\x10\x98\x03\x12\x0c\n\x07Migrate\x10\x99\x03\x12\t\n\x04Move\x10\x9a\x03\x12\x13\n\x0eObjectEncoding\x10\x9b\x03\x12\x0f\n\nObjectFreq\x10\x9c\x03\x12\x13\n\x0eObjectIdleTime\x10\x9d\x03\x12\x13\n\x0eObjectRefCount\x10\x9e\x03\x12\x0c\n\x07Persist\x10\x9f\x03\x12\x0c\n\x07PExpire\x10\xa0\x03\x12\x0e\n\tPExpireAt\x10\xa1\x03\x12\x10\n\x0bPExpireTime\x10\xa2\x03\x12\t\n\x04PTTL\x10\xa3\x03\x12\x0e\n\tRandomKey\x10\xa4\x03\x12\x0b\n\x06Rename\x10\xa5\x03\x12\r\n\x08RenameNX\x10\xa6\x03\x12\x0c\n\x07Restore\x10\xa7\x03\x12\t\n\x04Scan\x10\xa8\x03\x12\t\n\x04Sort\x10\xa9\x03\x12\x11\n\x0cSortReadOnly\x10\xaa\x03\x12\n\n\x05Touch\x10\xab\x03\x12\x08\n\x03TTL\x10\xac\x03\x12\t\n\x04Type\x10\xad\x03\x12\x0b\n\x06Unlink\x10\xae\x03\x12\t\n\x04Wait\x10\xaf\x03\x12\x0c\n\x07WaitAof\x10\xb0\x03\x12\x0b\n\x06GeoAdd\x10\xf5\x03\x12\x0c\n\x07GeoDist\x10\xf6\x03\x12\x0c\n\x07GeoHash\x10\xf7\x03\x12\x0b\n\x06GeoPos\x10\xf8\x03\x12\x0e\n\tGeoRadius\x10\xf9\x03\x12\x16\n\x11GeoRadiusReadOnly\x10\xfa\x03\x12\x16\n\x11GeoRadiusByMember\x10\xfb\x03\x12\x1e\n\x19GeoRadiusByMemberReadOnly\x10\xfc\x03\x12\x0e\n\tGeoSearch\x10\xfd\x03\x12\x13\n\x0eGeoSearchStore\x10\xfe\x03\x12\t\n\x04HDel\x10\xd9\x04\x12\x0c\n\x07HExists\x10\xda\x04\x12\t\n\x04HGet\x10\xdb\x04\x12\x0c\n\x07HGetAll\x10\xdc\x04\x12\x0c\n\x07HIncrBy\x10\xdd\x04\x12\x11\n\x0cHIncrByFloat\x10\xde\x04\x12\n\n\x05HKeys\x10\xdf\x04\x12\t\n\x04HLen\x10\xe0\x04\x12\n\n\x05HMGet\x10\xe1\x04\x12\n\n\x05HMSet\x10\xe2\x04\x12\x0f\n\nHRandField\x10\xe3\x04\x12\n\n\x05HScan\x10\xe4\x04\x12\t\n\x04HSet\x10\xe5\x04\x12\x0b\n\x06HSetNX\x10\xe6\x04\x12\x0c\n\x07HStrlen\x10\xe7\x04\x12\n\n\x05HVals\x10\xe8\x04\x12\x0b\n\x06HSetEx\x10\xe9\x04\x12\x0b\n\x06HGetEx\x10\xea\x04\x12\x0c\n\x07HExpire\x10\xeb\x04\x12\x0e\n\tHExpireAt\x10\xec\x04\x12\r\n\x08HPExpire\x10\xed\x04\x12\x0f\n\nHPExpireAt\x10\xee\x04\x12\r\n\x08HPersist\x10\xef\x04\x12\t\n\x04HTtl\x10\xf0\x04\x12\n\n\x05HPTtl\x10\xf1\x04\x12\x10\n\x0bHExpireTime\x10\xf2\x04\x12\x11\n\x0cHPExpireTime\x10\xf3\x04\x12\n\n\x05PfAdd\x10\xbd\x05\x12\x0c\n\x07PfCount\x10\xbe\x05\x12\x0c\n\x07PfMerge\x10\xbf\x05\x12\x0b\n\x06\x42LMove\x10\xa1\x06\x12\x0b\n\x06\x42LMPop\x10\xa2\x06\x12\n\n\x05\x42LPop\x10\xa3\x06\x12\n\n\x05\x42RPop\x10\xa4\x06\x12\x0f\n\nBRPopLPush\x10\xa5\x06\x12\x0b\n\x06LIndex\x10\xa6\x06\x12\x0c\n\x07LInsert\x10\xa7\x06\x12\t\n\x04LLen\x10\xa8\x06\x12\n\n\x05LMove\x10\xa9\x06\x12\n\n\x05LMPop\x10\xaa\x06\x12\t\n\x04LPop\x10\xab\x06\x12\t\n\x04LPos\x10\xac\x06\x12\n\n\x05LPush\x10\xad\x06\x12\x0b\n\x06LPushX\x10\xae\x06\x12\x0b\n\x06LRange\x10\xaf\x06\x12\t\n\x04LRem\x10\xb0\x06\x12\t\n\x04LSet\x10\xb1\x06\x12\n\n\x05LTrim\x10\xb2\x06\x12\t\n\x04RPop\x10\xb3\x06\x12\x0e\n\tRPopLPush\x10\xb4\x06\x12\n\n\x05RPush\x10\xb5\x06\x12\x0b\n\x06RPushX\x10\xb6\x06\x12\x0f\n\nPSubscribe\x10\x85\x07\x12\x0c\n\x07Publish\x10\x86\x07\x12\x13\n\x0ePubSubChannels\x10\x87\x07\x12\x11\n\x0cPubSubNumPat\x10\x88\x07\x12\x11\n\x0cPubSubNumSub\x10\x89\x07\x12\x18\n\x13PubSubShardChannels\x10\x8a\x07\x12\x16\n\x11PubSubShardNumSub\x10\x8b\x07\x12\x11\n\x0cPUnsubscribe\x10\x8c\x07\x12\r\n\x08SPublish\x10\x8d\x07\x12\x0f\n\nSSubscribe\x10\x8e\x07\x12\x0e\n\tSubscribe\x10\x8f\x07\x12\x11\n\x0cSUnsubscribe\x10\x90\x07\x12\x10\n\x0bUnsubscribe\x10\x91\x07\x12\t\n\x04\x45val\x10\xe9\x07\x12\x11\n\x0c\x45valReadOnly\x10\xea\x07\x12\x0c\n\x07\x45valSha\x10\xeb\x07\x12\x14\n\x0f\x45valShaReadOnly\x10\xec\x07\x12\n\n\x05\x46\x43\x61ll\x10\xed\x07\x12\x12\n\rFCallReadOnly\x10\xee\x07\x12\x13\n\x0e\x46unctionDelete\x10\xef\x07\x12\x11\n\x0c\x46unctionDump\x10\xf0\x07\x12\x12\n\rFunctionFlush\x10\xf1\x07\x12\x11\n\x0c\x46unctionKill\x10\xf2\x07\x12\x11\n\x0c\x46unctionList\x10\xf3\x07\x12\x11\n\x0c\x46unctionLoad\x10\xf4\x07\x12\x14\n\x0f\x46unctionRestore\x10\xf5\x07\x12\x12\n\rFunctionStats\x10\xf6\x07\x12\x10\n\x0bScriptDebug\x10\xf7\x07\x12\x11\n\x0cScriptExists\x10\xf8\x07\x12\x10\n\x0bScriptFlush\x10\xf9\x07\x12\x0f\n\nScriptKill\x10\xfa\x07\x12\x0f\n\nScriptLoad\x10\xfb\x07\x12\x0f\n\nScriptShow\x10\xfc\x07\x12\x0b\n\x06\x41\x63lCat\x10\xcd\x08\x12\x0f\n\nAclDelUser\x10\xce\x08\x12\x0e\n\tAclDryRun\x10\xcf\x08\x12\x0f\n\nAclGenPass\x10\xd0\x08\x12\x0f\n\nAclGetUser\x10\xd1\x08\x12\x0c\n\x07\x41\x63lList\x10\xd2\x08\x12\x0c\n\x07\x41\x63lLoad\x10\xd3\x08\x12\x0b\n\x06\x41\x63lLog\x10\xd4\x08\x12\x0c\n\x07\x41\x63lSave\x10\xd5\x08\x12\x0f\n\nAclSetSser\x10\xd6\x08\x12\r\n\x08\x41\x63lUsers\x10\xd7\x08\x12\x0e\n\tAclWhoami\x10\xd8\x08\x12\x11\n\x0c\x42gRewriteAof\x10\xd9\x08\x12\x0b\n\x06\x42gSave\x10\xda\x08\x12\r\n\x08\x43ommand_\x10\xdb\x08\x12\x11\n\x0c\x43ommandCount\x10\xdc\x08\x12\x10\n\x0b\x43ommandDocs\x10\xdd\x08\x12\x13\n\x0e\x43ommandGetKeys\x10\xde\x08\x12\x1b\n\x16\x43ommandGetKeysAndFlags\x10\xdf\x08\x12\x10\n\x0b\x43ommandInfo\x10\xe0\x08\x12\x10\n\x0b\x43ommandList\x10\xe1\x08\x12\x0e\n\tConfigGet\x10\xe2\x08\x12\x14\n\x0f\x43onfigResetStat\x10\xe3\x08\x12\x12\n\rConfigRewrite\x10\xe4\x08\x12\x0e\n\tConfigSet\x10\xe5\x08\x12\x0b\n\x06\x44\x42Size\x10\xe6\x08\x12\r\n\x08\x46\x61ilOver\x10\xe7\x08\x12\r\n\x08\x46lushAll\x10\xe8\x08\x12\x0c\n\x07\x46lushDB\x10\xe9\x08\x12\t\n\x04Info\x10\xea\x08\x12\r\n\x08LastSave\x10\xeb\x08\x12\x12\n\rLatencyDoctor\x10\xec\x08\x12\x11\n\x0cLatencyGraph\x10\xed\x08\x12\x15\n\x10LatencyHistogram\x10\xee\x08\x12\x13\n\x0eLatencyHistory\x10\xef\x08\x12\x12\n\rLatencyLatest\x10\xf0\x08\x12\x11\n\x0cLatencyReset\x10\xf1\x08\x12\x0b\n\x06Lolwut\x10\xf2\x08\x12\x11\n\x0cMemoryDoctor\x10\xf3\x08\x12\x16\n\x11MemoryMallocStats\x10\xf4\x08\x12\x10\n\x0bMemoryPurge\x10\xf5\x08\x12\x10\n\x0bMemoryStats\x10\xf6\x08\x12\x10\n\x0bMemoryUsage\x10\xf7\x08\x12\x0f\n\nModuleList\x10\xf8\x08\x12\x0f\n\nModuleLoad\x10\xf9\x08\x12\x11\n\x0cModuleLoadEx\x10\xfa\x08\x12\x11\n\x0cModuleUnload\x10\xfb\x08\x12\x0c\n\x07Monitor\x10\xfc\x08\x12\n\n\x05PSync\x10\xfd\x08\x12\r\n\x08ReplConf\x10\xfe\x08\x12\x0e\n\tReplicaOf\x10\xff\x08\x12\x12\n\rRestoreAsking\x10\x80\t\x12\t\n\x04Role\x10\x81\t\x12\t\n\x04Save\x10\x82\t\x12\r\n\x08ShutDown\x10\x83\t\x12\x0c\n\x07SlaveOf\x10\x84\t\x12\x0f\n\nSlowLogGet\x10\x85\t\x12\x0f\n\nSlowLogLen\x10\x86\t\x12\x11\n\x0cSlowLogReset\x10\x87\t\x12\x0b\n\x06SwapDb\x10\x88\t\x12\t\n\x04Sync\x10\x89\t\x12\t\n\x04Time\x10\x8a\t\x12\t\n\x04SAdd\x10\xb1\t\x12\n\n\x05SCard\x10\xb2\t\x12\n\n\x05SDiff\x10\xb3\t\x12\x0f\n\nSDiffStore\x10\xb4\t\x12\x0b\n\x06SInter\x10\xb5\t\x12\x0f\n\nSInterCard\x10\xb6\t\x12\x10\n\x0bSInterStore\x10\xb7\t\x12\x0e\n\tSIsMember\x10\xb8\t\x12\r\n\x08SMembers\x10\xb9\t\x12\x0f\n\nSMIsMember\x10\xba\t\x12\n\n\x05SMove\x10\xbb\t\x12\t\n\x04SPop\x10\xbc\t\x12\x10\n\x0bSRandMember\x10\xbd\t\x12\t\n\x04SRem\x10\xbe\t\x12\n\n\x05SScan\x10\xbf\t\x12\x0b\n\x06SUnion\x10\xc0\t\x12\x10\n\x0bSUnionStore\x10\xc1\t\x12\x0b\n\x06\x42ZMPop\x10\x95\n\x12\r\n\x08\x42ZPopMax\x10\x96\n\x12\r\n\x08\x42ZPopMin\x10\x97\n\x12\t\n\x04ZAdd\x10\x98\n\x12\n\n\x05ZCard\x10\x99\n\x12\x0b\n\x06ZCount\x10\x9a\n\x12\n\n\x05ZDiff\x10\x9b\n\x12\x0f\n\nZDiffStore\x10\x9c\n\x12\x0c\n\x07ZIncrBy\x10\x9d\n\x12\x0b\n\x06ZInter\x10\x9e\n\x12\x0f\n\nZInterCard\x10\x9f\n\x12\x10\n\x0bZInterStore\x10\xa0\n\x12\x0e\n\tZLexCount\x10\xa1\n\x12\n\n\x05ZMPop\x10\xa2\n\x12\x0c\n\x07ZMScore\x10\xa3\n\x12\x0c\n\x07ZPopMax\x10\xa4\n\x12\x0c\n\x07ZPopMin\x10\xa5\n\x12\x10\n\x0bZRandMember\x10\xa6\n\x12\x0b\n\x06ZRange\x10\xa7\n\x12\x10\n\x0bZRangeByLex\x10\xa8\n\x12\x12\n\rZRangeByScore\x10\xa9\n\x12\x10\n\x0bZRangeStore\x10\xaa\n\x12\n\n\x05ZRank\x10\xab\n\x12\t\n\x04ZRem\x10\xac\n\x12\x13\n\x0eZRemRangeByLex\x10\xad\n\x12\x14\n\x0fZRemRangeByRank\x10\xae\n\x12\x15\n\x10ZRemRangeByScore\x10\xaf\n\x12\x0e\n\tZRevRange\x10\xb0\n\x12\x13\n\x0eZRevRangeByLex\x10\xb1\n\x12\x15\n\x10ZRevRangeByScore\x10\xb2\n\x12\r\n\x08ZRevRank\x10\xb3\n\x12\n\n\x05ZScan\x10\xb4\n\x12\x0b\n\x06ZScore\x10\xb5\n\x12\x0b\n\x06ZUnion\x10\xb6\n\x12\x10\n\x0bZUnionStore\x10\xb7\n\x12\t\n\x04XAck\x10\xf9\n\x12\t\n\x04XAdd\x10\xfa\n\x12\x0f\n\nXAutoClaim\x10\xfb\n\x12\x0b\n\x06XClaim\x10\xfc\n\x12\t\n\x04XDel\x10\xfd\n\x12\x11\n\x0cXGroupCreate\x10\xfe\n\x12\x19\n\x14XGroupCreateConsumer\x10\xff\n\x12\x16\n\x11XGroupDelConsumer\x10\x80\x0b\x12\x12\n\rXGroupDestroy\x10\x81\x0b\x12\x10\n\x0bXGroupSetId\x10\x82\x0b\x12\x13\n\x0eXInfoConsumers\x10\x83\x0b\x12\x10\n\x0bXInfoGroups\x10\x84\x0b\x12\x10\n\x0bXInfoStream\x10\x85\x0b\x12\t\n\x04XLen\x10\x86\x0b\x12\r\n\x08XPending\x10\x87\x0b\x12\x0b\n\x06XRange\x10\x88\x0b\x12\n\n\x05XRead\x10\x89\x0b\x12\x0f\n\nXReadGroup\x10\x8a\x0b\x12\x0e\n\tXRevRange\x10\x8b\x0b\x12\x0b\n\x06XSetId\x10\x8c\x0b\x12\n\n\x05XTrim\x10\x8d\x0b\x12\x0b\n\x06\x41ppend\x10\xdd\x0b\x12\t\n\x04\x44\x65\x63r\x10\xde\x0b\x12\x0b\n\x06\x44\x65\x63rBy\x10\xdf\x0b\x12\x08\n\x03Get\x10\xe0\x0b\x12\x0b\n\x06GetDel\x10\xe1\x0b\x12\n\n\x05GetEx\x10\xe2\x0b\x12\r\n\x08GetRange\x10\xe3\x0b\x12\x0b\n\x06GetSet\x10\xe4\x0b\x12\t\n\x04Incr\x10\xe5\x0b\x12\x0b\n\x06IncrBy\x10\xe6\x0b\x12\x10\n\x0bIncrByFloat\x10\xe7\x0b\x12\x08\n\x03LCS\x10\xe8\x0b\x12\t\n\x04MGet\x10\xe9\x0b\x12\t\n\x04MSet\x10\xea\x0b\x12\x0b\n\x06MSetNX\x10\xeb\x0b\x12\x0b\n\x06PSetEx\x10\xec\x0b\x12\x08\n\x03Set\x10\xed\x0b\x12\n\n\x05SetEx\x10\xee\x0b\x12\n\n\x05SetNX\x10\xef\x0b\x12\r\n\x08SetRange\x10\xf0\x0b\x12\x0b\n\x06Strlen\x10\xf1\x0b\x12\x0b\n\x06Substr\x10\xf2\x0b\x12\x0c\n\x07\x44iscard\x10\xc1\x0c\x12\t\n\x04\x45xec\x10\xc2\x0c\x12\n\n\x05Multi\x10\xc3\x0c\x12\x0c\n\x07UnWatch\x10\xc4\x0c\x12\n\n\x05Watch\x10\xc5\x0c\x12\x12\n\rJsonArrAppend\x10\xd1\x0f\x12\x11\n\x0cJsonArrIndex\x10\xd2\x0f\x12\x12\n\rJsonArrInsert\x10\xd3\x0f\x12\x0f\n\nJsonArrLen\x10\xd4\x0f\x12\x0f\n\nJsonArrPop\x10\xd5\x0f\x12\x10\n\x0bJsonArrTrim\x10\xd6\x0f\x12\x0e\n\tJsonClear\x10\xd7\x0f\x12\x0e\n\tJsonDebug\x10\xd8\x0f\x12\x0c\n\x07JsonDel\x10\xd9\x0f\x12\x0f\n\nJsonForget\x10\xda\x0f\x12\x0c\n\x07JsonGet\x10\xdb\x0f\x12\r\n\x08JsonMGet\x10\xdc\x0f\x12\x12\n\rJsonNumIncrBy\x10\xdd\x0f\x12\x12\n\rJsonNumMultBy\x10\xde\x0f\x12\x10\n\x0bJsonObjKeys\x10\xdf\x0f\x12\x0f\n\nJsonObjLen\x10\xe0\x0f\x12\r\n\x08JsonResp\x10\xe1\x0f\x12\x0c\n\x07JsonSet\x10\xe2\x0f\x12\x12\n\rJsonStrAppend\x10\xe3\x0f\x12\x0f\n\nJsonStrLen\x10\xe4\x0f\x12\x0f\n\nJsonToggle\x10\xe5\x0f\x12\r\n\x08JsonType\x10\xe6\x0f\x12\x0b\n\x06\x46tList\x10\xb5\x10\x12\x10\n\x0b\x46tAggregate\x10\xb6\x10\x12\x0f\n\nFtAliasAdd\x10\xb7\x10\x12\x0f\n\nFtAliasDel\x10\xb8\x10\x12\x10\n\x0b\x46tAliasList\x10\xb9\x10\x12\x12\n\rFtAliasUpdate\x10\xba\x10\x12\r\n\x08\x46tCreate\x10\xbb\x10\x12\x10\n\x0b\x46tDropIndex\x10\xbc\x10\x12\x0e\n\tFtExplain\x10\xbd\x10\x12\x11\n\x0c\x46tExplainCli\x10\xbe\x10\x12\x0b\n\x06\x46tInfo\x10\xbf\x10\x12\x0e\n\tFtProfile\x10\xc0\x10\x12\r\n\x08\x46tSearch\x10\xc1\x10\x62\x06proto3')
+
+_globals = globals()
+_builder.BuildMessageAndEnumDescriptors(DESCRIPTOR, _globals)
+_builder.BuildTopDescriptorsAndMessages(DESCRIPTOR, 'protobuf.command_request_pb2', _globals)
+if _descriptor._USE_C_DESCRIPTORS == False:
+  DESCRIPTOR._options = None
+  _globals['_SIMPLEROUTES']._serialized_start=1941
+  _globals['_SIMPLEROUTES']._serialized_end=1999
+  _globals['_SLOTTYPES']._serialized_start=2001
+  _globals['_SLOTTYPES']._serialized_end=2038
+  _globals['_REQUESTTYPE']._serialized_start=2041
+  _globals['_REQUESTTYPE']._serialized_end=8291
+  _globals['_SLOTIDROUTE']._serialized_start=51
+  _globals['_SLOTIDROUTE']._serialized_end=128
+  _globals['_SLOTKEYROUTE']._serialized_start=130
+  _globals['_SLOTKEYROUTE']._serialized_end=209
+  _globals['_BYADDRESSROUTE']._serialized_start=211
+  _globals['_BYADDRESSROUTE']._serialized_end=255
+  _globals['_ROUTES']._serialized_start=258
+  _globals['_ROUTES']._serialized_end=504
+  _globals['_COMMAND']._serialized_start=507
+  _globals['_COMMAND']._serialized_end=689
+  _globals['_COMMAND_ARGSARRAY']._serialized_start=656
+  _globals['_COMMAND_ARGSARRAY']._serialized_end=681
+  _globals['_SCRIPTINVOCATIONPOINTERS']._serialized_start=692
+  _globals['_SCRIPTINVOCATIONPOINTERS']._serialized_end=820
+  _globals['_SCRIPTINVOCATION']._serialized_start=822
+  _globals['_SCRIPTINVOCATION']._serialized_end=882
+  _globals['_BATCH']._serialized_start=885
+  _globals['_BATCH']._serialized_end=1157
+  _globals['_CLUSTERSCAN']._serialized_start=1160
+  _globals['_CLUSTERSCAN']._serialized_end=1340
+  _globals['_UPDATECONNECTIONPASSWORD']._serialized_start=1342
+  _globals['_UPDATECONNECTIONPASSWORD']._serialized_end=1428
+  _globals['_COMMANDREQUEST']._serialized_start=1431
+  _globals['_COMMANDREQUEST']._serialized_end=1939
+# @@protoc_insertion_point(module_scope)