udl-sdk 0.1.0a1__py3-none-any.whl

unifieddatalibrary/types/mti_list_response.py

@@ -0,0 +1,919 @@
+# File generated from our OpenAPI spec by Stainless. See CONTRIBUTING.md for details.
+
+from typing import List, Optional
+from datetime import date, datetime
+from typing_extensions import Literal, TypeAlias
+
+from pydantic import Field as FieldInfo
+
+from .._models import BaseModel
+
+__all__ = [
+    "MtiListResponse",
+    "MtiListResponseItem",
+    "MtiListResponseItemDwell",
+    "MtiListResponseItemDwellD32",
+    "MtiListResponseItemFreeText",
+    "MtiListResponseItemHrr",
+    "MtiListResponseItemHrrH32",
+    "MtiListResponseItemJobDef",
+    "MtiListResponseItemJobRequest",
+    "MtiListResponseItemMission",
+    "MtiListResponseItemPlatformLoc",
+]
+
+
+class MtiListResponseItemDwellD32(BaseModel):
+    d32_1: Optional[int] = None
+    """Sequential count of this MTI report within the dwell."""
+
+    d32_10: Optional[str] = None
+    """The classification of the target (i.e. vehicle, aircraft, …)."""
+
+    d32_11: Optional[int] = None
+    """
+    Estimated probability that the target classification field is correctly
+    classified.
+    """
+
+    d32_12: Optional[int] = None
+    """
+    Standard deviation of the estimated slant range of the reported detection, in
+    centimeters.
+    """
+
+    d32_13: Optional[int] = None
+    """
+    Standard deviation of the position estimate, in the cross-range direction, of
+    the reported detection, in decimeters.
+    """
+
+    d32_14: Optional[int] = None
+    """Standard deviation of the estimated geodetic height, in meters."""
+
+    d32_15: Optional[int] = None
+    """
+    Standard deviation of the measured line-of-sight velocity component, in
+    centimeters per second.
+    """
+
+    d32_16: Optional[int] = None
+    """
+    The Truth Tag- Application is the Application Field truncated to 8 bits, from
+    the Entity State Protocol Data Unit (PDU) used to generate the MTI Target.
+    """
+
+    d32_17: Optional[int] = None
+    """
+    The Truth Tag - Entity is the Entity Field from the Entity State PDU used to
+    generate the MTI Target.
+    """
+
+    d32_18: Optional[int] = None
+    """Estimated radar cross section of the target return, in half-decibels."""
+
+    d32_2: Optional[float] = None
+    """
+    The North-South position of the reported detection, expressed as degrees North
+    (positive) or South (negative) of the Equator.
+    """
+
+    d32_3: Optional[float] = None
+    """
+    The East-West position of the reported detection, expressed as degrees East
+    (positive) from the Prime Meridian.
+    """
+
+    d32_4: Optional[int] = None
+    """
+    The North-South position of the reported detection, expressed as degrees North
+    (positive) or South (negative) from the Dwell Area Center Latitude.
+    """
+
+    d32_5: Optional[int] = None
+    """
+    The East-West position of the reported detection, expressed as degrees East
+    (positive, 0 to 180) or West (negative, 0 to -180) of the Prime Meridian from
+    the Dwell Area Center Longitude.
+    """
+
+    d32_6: Optional[int] = None
+    """
+    Height of the reported detection, referenced to its position above the WGS 84
+    ellipsoid, in meters.
+    """
+
+    d32_7: Optional[int] = None
+    """
+    The component of velocity for the reported detection, expressed in centimeters
+    per second, corrected for platform motion, along the line of sight between the
+    sensor and the reported detection, where the positive direction is away from the
+    sensor.
+    """
+
+    d32_8: Optional[int] = None
+    """
+    The target wrap velocity permits trackers to un-wrap velocities for targets with
+    line-of-sight components large enough to exceed the first velocity period.
+    Expressed in centimeters/sec.
+    """
+
+    d32_9: Optional[int] = None
+    """Estimated signal-to-noise ratio (SNR) of the target return, in decibels."""
+
+
+class MtiListResponseItemDwell(BaseModel):
+    d10: Optional[float] = None
+    """
+    Factor which modifies the value of the reported target latitude (Delta Latitude,
+    field D32.4).
+    """
+
+    d11: Optional[float] = None
+    """
+    Factor which modifies the value of the reported target longitude (Delta
+    Longitude, field D32.5).
+    """
+
+    d12: Optional[int] = None
+    """
+    Standard deviation in the estimated horizontal sensor location at the time of
+    the dwell, measured along the sensor track direction (field D15), in
+    centimeters.
+    """
+
+    d13: Optional[int] = None
+    """
+    Standard deviation in the estimated horizontal sensor location at the time of
+    the dwell, measured orthogonal to the sensor track direction (field D15), in
+    centimeters.
+    """
+
+    d14: Optional[int] = None
+    """Standard deviation of the sensor altitude estimate (field D9), in centimeters."""
+
+    d15: Optional[float] = None
+    """
+    Ground track of the sensor at the time of the dwell, as the angle in degrees
+    (clockwise) from True North.
+    """
+
+    d16: Optional[int] = None
+    """Ground speed of the sensor at the time of the dwell, in millimeters per second."""
+
+    d17: Optional[int] = None
+    """Velocity of the sensor in the vertical direction, in decimeters per second."""
+
+    d18: Optional[int] = None
+    """Standard deviation of the estimate of the sensor track, in degrees."""
+
+    d19: Optional[int] = None
+    """Standard deviation of estimate of the sensor speed, in millimeters per second."""
+
+    d2: Optional[int] = None
+    """
+    Sequential count of a revisit of the bounding area in the last sent Job
+    Definition Segment, where a Revisit Index of '0' indicates the first revisit.
+    """
+
+    d20: Optional[int] = None
+    """
+    Standard deviation of estimate of the sensor vertical velocity, expressed in
+    centimeters per second.
+    """
+
+    d21: Optional[float] = None
+    """
+    Heading of the platform at the time of the dwell, as the angle in degrees
+    (clockwise) from True North to the roll axis of the platform.
+    """
+
+    d22: Optional[float] = None
+    """Pitch angle of the platform at the time of the dwell, in degrees."""
+
+    d23: Optional[float] = None
+    """Roll angle of the platform at the time of the dwell, in degrees."""
+
+    d24: Optional[float] = None
+    """
+    The North-South position of the center of the dwell area, expressed as degrees
+    North (positive) or South (negative) of the Equator.
+    """
+
+    d25: Optional[float] = None
+    """
+    The East-West position of the center of the dwell area, expressed as degrees
+    East (positive, 0 to 180) or West (negative, 0 to -180) of the Prime Meridian.
+    """
+
+    d26: Optional[float] = None
+    """
+    Distance on the earth surface, expressed in kilometers, from the near edge to
+    the center of the dwell area.
+    """
+
+    d27: Optional[float] = None
+    """For dwell based radars, one-half of the 3-dB beamwidth.
+
+    For non-dwell based radars, the angle between the beginning of the dwell to the
+    center of the dwell. Measured in degrees.
+    """
+
+    d28: Optional[float] = None
+    """
+    Rotation of the sensor broadside face about the local vertical axis of the
+    platform, in degrees.
+    """
+
+    d29: Optional[float] = None
+    """
+    Rotation angle of the sensor about the transverse axis of the sensor broadside,
+    in degrees.
+    """
+
+    d3: Optional[int] = None
+    """
+    Temporally sequential count of a dwell within the revisit of a particular
+    bounding area for a given job ID.
+    """
+
+    d30: Optional[float] = None
+    """
+    Rotation angle of the sensor about the transverse axis of the sensor broadside,
+    in degrees.
+    """
+
+    d31: Optional[int] = None
+    """
+    Minimum velocity component, along the line of sight, which can be detected by
+    the sensor, in decimeters per second.
+    """
+
+    d32: Optional[List[MtiListResponseItemDwellD32]] = None
+    """
+    Minimum velocity component, along the line of sight, which can be detected by
+    the sensor, in decimeters per second.
+    """
+
+    d4: Optional[bool] = None
+    """Flag indicating the last dwell of the revisit."""
+
+    d5: Optional[int] = None
+    """
+    Count of the total number of targets reported during this dwell and sent in this
+    Dwell Segment.
+    """
+
+    d6: Optional[int] = None
+    """
+    Elapsed time, expressed in milliseconds, from midnight at the beginning of the
+    day specified in the Reference Time fields (missionRefTime) of the Mission
+    Segment.
+    """
+
+    d7: Optional[float] = None
+    """
+    North-South position of the sensor at the temporal center of the dwell, in
+    degrees.
+    """
+
+    d8: Optional[float] = None
+    """
+    The East-West position of the sensor at the temporal center of the dwell, in
+    degrees East (positive, 0 to 180) or West (negative, 0 to -180) of the Prime
+    Meridian.
+    """
+
+    d9: Optional[int] = None
+    """
+    The altitude of the sensor at temporal center of the dwell, above the WGS 84
+    ellipsoid, expressed in centimeters.
+    """
+
+    dwellts: Optional[datetime] = None
+    """Dwell timestamp in ISO8601 UTC format."""
+
+
+class MtiListResponseItemFreeText(BaseModel):
+    f1: Optional[str] = None
+    """The originator of the Free Text message."""
+
+    f2: Optional[str] = None
+    """The recipient for which the Free Text message is intended."""
+
+    f3: Optional[str] = None
+    """Free text data message."""
+
+
+class MtiListResponseItemHrrH32(BaseModel):
+    h32_1: Optional[int] = None
+    """Scatterer’s power magnitude."""
+
+    h32_2: Optional[int] = None
+    """Scatterer’s complex phase, in degrees."""
+
+    h32_3: Optional[int] = None
+    """
+    Scatterer’s Range index relative to Range-Doppler chip, where increasing index
+    equates to increasing range.
+    """
+
+    h32_4: Optional[int] = None
+    """
+    Scatterer’s Doppler index relative to Range-Doppler chip, where increasing index
+    equates to increasing Doppler.
+    """
+
+
+class MtiListResponseItemHrr(BaseModel):
+    h10: Optional[int] = None
+    """
+    Detection threshold used to isolate significant target scatterer pixels,
+    expressed as power relative to clutter mean in negative quarter-decibels.
+    """
+
+    h11: Optional[float] = None
+    """3dB range impulse response of the radar, expressed in centimeters."""
+
+    h12: Optional[float] = None
+    """Slant Range pixel spacing after over sampling, expressed in centimeters."""
+
+    h13: Optional[float] = None
+    """3dB Doppler resolution of the radar, expressed in Hertz."""
+
+    h14: Optional[float] = None
+    """Doppler pixel spacing after over sampling, expressed in Hertz."""
+
+    h15: Optional[float] = None
+    """Center Frequency of the radar in GHz."""
+
+    h16: Optional[str] = None
+    """Enumeration table denoting the compression technique used."""
+
+    h17: Optional[str] = None
+    """
+    Enumeration table indicating the spectral weighting used in the range
+    compression process.
+    """
+
+    h18: Optional[str] = None
+    """
+    Enumeration table indicating the spectral weighting used in the cross-range or
+    Doppler compression process.
+    """
+
+    h19: Optional[float] = None
+    """Initial power of the peak scatterer, expressed in dB."""
+
+    h2: Optional[int] = None
+    """Sequential count of a revisit of the bounding area for a given job ID."""
+
+    h20: Optional[int] = None
+    """RCS of the peak scatterer, expressed in half-decibels (dB/2)."""
+
+    h21: Optional[int] = None
+    """
+    When the RDM does not correlate to a single MTI report index or when the center
+    range bin does not correlate to the center of the dwell; provide the range
+    sample offset in meters from Dwell Center (positive is away from the sensor) of
+    the first scatterer record.
+    """
+
+    h22: Optional[int] = None
+    """
+    When the RDM does not correlate to a single MTI report index or the center
+    doppler bin does not correlate to the doppler centroid of the dwell; Doppler
+    sample value in Hz of the first scatterer record.
+    """
+
+    h23: Optional[str] = None
+    """Enumeration field which designates the type of data being delivered."""
+
+    h24: Optional[str] = None
+    """
+    Flag field to indicate the additional signal processing techniques applied to
+    the data.
+    """
+
+    h27: Optional[int] = None
+    """Number of pixels in the range dimension of the chip."""
+
+    h28: Optional[int] = None
+    """
+    Distance from Range Bin to closest edge in the entire chip, expressed in
+    centimeters.
+    """
+
+    h29: Optional[int] = None
+    """Relative velocity to skin line."""
+
+    h3: Optional[int] = None
+    """
+    Sequential count of a dwell within the revisit of a particular bounding area for
+    a given job ID.
+    """
+
+    h30: Optional[int] = None
+    """Computed object length based upon HRR profile, in meters."""
+
+    h31: Optional[int] = None
+    """Standard deviation of estimate of the object length, expressed in meters."""
+
+    h32: Optional[List[MtiListResponseItemHrrH32]] = None
+    """Standard deviation of estimate of the object length, expressed in meters."""
+
+    h4: Optional[bool] = None
+    """Flag to indicate the last dwell of the revisit."""
+
+    h5: Optional[int] = None
+    """Sequential index of the associated MTI Report."""
+
+    h6: Optional[int] = None
+    """
+    Number of Range Doppler pixels that exceed target scatterer threshold and are
+    reported in this segment.
+    """
+
+    h7: Optional[int] = None
+    """Number of Range Bins/Samples in a Range Doppler Chip."""
+
+    h8: Optional[int] = None
+    """Number of Doppler bins in a Range-Doppler chip."""
+
+    h9: Optional[int] = None
+    """The Peak Scatter returns the maximum power level (e.g.
+
+    in milliwatts, or dBm) registered by the sensor.
+    """
+
+
+class MtiListResponseItemJobDef(BaseModel):
+    j10: Optional[float] = None
+    """
+    North-South position of the third corner (Point C) defining the area for sensor
+    service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    j11: Optional[float] = None
+    """
+    East-West position of the third corner (Point C) defining the area for sensor
+    service, expressed as degrees East (positive, 0 to 180) or West (negative, 0 to
+    -180) of the Prime Meridian.
+    """
+
+    j12: Optional[float] = None
+    """
+    North-South position of the fourth corner (Point D) defining the area for sensor
+    service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    j13: Optional[float] = None
+    """
+    East-West position of the fourth corner (Point D) defining the area for sensor
+    service, expressed as degrees East (positive, 0 to 180) or West (negative, 0 to
+    -180) of the Prime Meridian.
+    """
+
+    j14: Optional[str] = None
+    """Mode in which the radar will operate for the given job ID."""
+
+    j15: Optional[int] = None
+    """The nominal revisit interval for the job ID, expressed in deciseconds.
+
+    Value of zero, indicates that the sensor is not revisiting the previous area.
+    """
+
+    j16: Optional[int] = None
+    """
+    Nominal estimate of the standard deviation in the estimated horizontal (along
+    track) sensor location, expressed in decimeters. measured along the sensor track
+    direction defined in the Dwell segment.
+    """
+
+    j17: Optional[int] = None
+    """
+    Nominal estimate of the standard deviation in the estimated horizontal sensor
+    location, measured orthogonal to the track direction, expressed in decimeters.
+    """
+
+    j18: Optional[int] = None
+    """
+    Nominal estimate of the standard deviation of the measured sensor altitude,
+    expressed in decimeters.
+    """
+
+    j19: Optional[int] = None
+    """
+    Standard deviation of the estimate of sensor track heading, expressed in
+    degrees.
+    """
+
+    j2: Optional[str] = None
+    """The type of sensor or the platform."""
+
+    j20: Optional[int] = None
+    """
+    Nominal standard deviation of the estimate of sensor speed, expressed in
+    millimeters per second.
+    """
+
+    j21: Optional[int] = None
+    """
+    Nominal standard deviation of the slant range of the reported detection,
+    expressed in centimeters.
+    """
+
+    j22: Optional[float] = None
+    """
+    Nominal standard deviation of the measured cross angle to the reported
+    detection, expressed in degrees.
+    """
+
+    j23: Optional[int] = None
+    """
+    Nominal standard deviation of the velocity line-of-sight component, expressed in
+    centimeters per second.
+    """
+
+    j24: Optional[int] = None
+    """
+    Nominal minimum velocity component along the line of sight, which can be
+    detected by the sensor, expressed in decimeters per second.
+    """
+
+    j25: Optional[int] = None
+    """
+    Nominal probability that an unobscured ten square-meter target will be detected
+    within the given area of surveillance.
+    """
+
+    j26: Optional[int] = None
+    """
+    The expected density of False Alarms (FA), expressed as the negative of the
+    decibel value.
+    """
+
+    j27: Optional[str] = None
+    """The terrain elevation model used for developing the target reports."""
+
+    j28: Optional[str] = None
+    """The geoid model used for developing the target reports."""
+
+    j3: Optional[str] = None
+    """Identifier of the particular variant of the sensor type."""
+
+    j4: Optional[int] = None
+    """
+    Flag field indicating whether filtering has been applied to the targets detected
+    within the dwell area.
+    """
+
+    j5: Optional[int] = None
+    """
+    Priority of this tasking request relative to all other active tasking requests
+    scheduled for execution on the specified platform.
+    """
+
+    j6: Optional[float] = None
+    """
+    North-South position of the first corner (Point A) defining the area for sensor
+    service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    j7: Optional[float] = None
+    """
+    East-West position of the first corner (Point A) defining the area for sensor
+    service, expressed as degrees East (positive, 0 to 180) or West (negative, 0 to
+    -180) of the Prime Meridian.
+    """
+
+    j8: Optional[float] = None
+    """
+    North-South position of the second corner (Point B) defining the area for sensor
+    service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    j9: Optional[float] = None
+    """
+    East-West position of the second corner (Point B) defining the area for sensor
+    service, expressed as degrees East (positive, 0 to 180) or West (negative, 0 to
+    -180) of the Prime Meridian.
+    """
+
+
+class MtiListResponseItemJobRequest(BaseModel):
+    job_req_est: Optional[datetime] = FieldInfo(alias="jobReqEst", default=None)
+    """Specifies the Earliest Start Time for which the service is requested.
+
+    Composite of fields R15-R20.
+    """
+
+    r1: Optional[str] = None
+    """The requestor of the sensor service."""
+
+    r10: Optional[float] = None
+    """
+    North-South position of the fourth corner (Point D) defining the requested area
+    for service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    r11: Optional[float] = None
+    """
+    East-West position of the fourth corner (Point D) defining the requested area
+    for service, expressed as degrees East (positive, 0 to 180) or West (negative, 0
+    to -180) of the Prime Meridian.
+    """
+
+    r12: Optional[str] = None
+    """Identifies the radar mode requested by the requestor."""
+
+    r13: Optional[int] = None
+    """
+    Specifies the radar range resolution requested by the requestor, expressed in
+    centimeters.
+    """
+
+    r14: Optional[int] = None
+    """
+    Specifies the radar cross-range resolution requested by the requestor, expressed
+    in decimeters.
+    """
+
+    r2: Optional[str] = None
+    """Identifier for the tasking message sent by the requesting station."""
+
+    r21: Optional[int] = None
+    """
+    Specifies the maximum time from the requested start time after which the request
+    is to be abandoned, expressed in seconds.
+    """
+
+    r22: Optional[int] = None
+    """
+    Specifies the time duration for the radar job, measured from the actual start of
+    the job, expressed in seconds.
+    """
+
+    r23: Optional[int] = None
+    """Specifies the revisit interval for the radar job, expressed in deciseconds."""
+
+    r24: Optional[str] = None
+    """the type of sensor or the platform."""
+
+    r25: Optional[str] = None
+    """The particular variant of the sensor type."""
+
+    r26: Optional[bool] = None
+    """
+    Flag field indicating that it is an initial request (flag = 0) or the desire of
+    the requestor to cancel (flag = 1) the requested job.
+    """
+
+    r3: Optional[int] = None
+    """
+    The priority of the request relative to other requests originated by the
+    requesting station.
+    """
+
+    r4: Optional[float] = None
+    """
+    North-South position of the first corner (Point A) defining the requested area
+    for service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    r5: Optional[float] = None
+    """
+    East-West position of the first corner (Point A) defining the requested area for
+    service, expressed as degrees East (positive, 0 to 180) or West (negative, 0 to
+    -180) of the Prime Meridian.
+    """
+
+    r6: Optional[float] = None
+    """
+    North-South position of the second corner (Point B) defining the requested area
+    for service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    r7: Optional[float] = None
+    """
+    East-West position of the second corner (Point B) defining the requested area
+    for service, expressed as degrees East (positive, 0 to 180) or West (negative, 0
+    to -180) of the Prime Meridian.
+    """
+
+    r8: Optional[float] = None
+    """
+    North-South position of the third corner (Point C) defining the requested area
+    for service, expressed as degrees North (positive) or South (negative) of the
+    Equator.
+    """
+
+    r9: Optional[float] = None
+    """
+    East-West position of the third corner (Point C) defining the requested area for
+    service, expressed as degrees East (positive, 0 to 180) or West (negative, 0 to
+    -180) of the Prime Meridian.
+    """
+
+
+class MtiListResponseItemMission(BaseModel):
+    m1: Optional[str] = None
+    """The mission plan id."""
+
+    m2: Optional[str] = None
+    """Unique identification of the flight plan."""
+
+    m3: Optional[str] = None
+    """Platform type that originated the data."""
+
+    m4: Optional[str] = None
+    """Identification of the platform variant, modifications, etc."""
+
+    msn_ref_ts: Optional[date] = FieldInfo(alias="msnRefTs", default=None)
+    """Mission origination date."""
+
+
+class MtiListResponseItemPlatformLoc(BaseModel):
+    l1: Optional[int] = None
+    """
+    Elapsed time, expressed in milliseconds, from midnight at the beginning of the
+    day specified in the Reference Time fields of the Mission Segment to the time
+    the report is prepared.
+    """
+
+    l2: Optional[float] = None
+    """
+    North-South position of the platform at the time the report is prepared,
+    expressed as degrees North (positive) or South (negative) of the Equator.
+    """
+
+    l3: Optional[float] = None
+    """
+    East-West position of the platform at the time the report is prepared, expressed
+    as degrees East (positive) from the Prime Meridian.
+    """
+
+    l4: Optional[int] = None
+    """
+    Altitude of the platform at the time the report is prepared, referenced to its
+    position above the WGS-84 ellipsoid, in centimeters.
+    """
+
+    l5: Optional[float] = None
+    """
+    Ground track of the platform at the time the report is prepared, expressed as
+    the angle in degrees (clockwise) from True North.
+    """
+
+    l6: Optional[int] = None
+    """
+    Ground speed of the platform at the time the report is prepared, expressed as
+    millimeters per second.
+    """
+
+    l7: Optional[int] = None
+    """
+    Velocity of the platform in the vertical direction, expressed as decimeters per
+    second.
+    """
+
+    platlocts: Optional[datetime] = None
+    """Platform location timestamp in ISO8601 UTC format."""
+
+
+class MtiListResponseItem(BaseModel):
+    classification_marking: str = FieldInfo(alias="classificationMarking")
+    """Classification marking of the data in IC/CAPCO Portion-marked format."""
+
+    data_mode: Literal["REAL", "TEST", "SIMULATED", "EXERCISE"] = FieldInfo(alias="dataMode")
+    """Indicator of whether the data is EXERCISE, REAL, SIMULATED, or TEST data:
+
+    EXERCISE: Data pertaining to a government or military exercise. The data
+    may include both real and simulated data.
+
+    REAL: Data collected or produced that pertains to real-world objects,
+    events, and analysis.
+
+    SIMULATED: Synthetic data generated by a model to mimic real-world
+    datasets.
+
+    TEST: Specific datasets used to evaluate compliance with specifications and
+    requirements, and for validating technical, functional, and performance
+    characteristics.
+    """
+
+    source: str
+    """Source of the data."""
+
+    id: Optional[str] = None
+    """Unique identifier of the record, auto-generated by the system."""
+
+    created_at: Optional[datetime] = FieldInfo(alias="createdAt", default=None)
+    """Time the row was created in the database, auto-populated by the system."""
+
+    created_by: Optional[str] = FieldInfo(alias="createdBy", default=None)
+    """
+    Application user who created the row in the database, auto-populated by the
+    system.
+    """
+
+    dwells: Optional[List[MtiListResponseItemDwell]] = None
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    free_texts: Optional[List[MtiListResponseItemFreeText]] = FieldInfo(alias="freeTexts", default=None)
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    hrrs: Optional[List[MtiListResponseItemHrr]] = None
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    job_defs: Optional[List[MtiListResponseItemJobDef]] = FieldInfo(alias="jobDefs", default=None)
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    job_requests: Optional[List[MtiListResponseItemJobRequest]] = FieldInfo(alias="jobRequests", default=None)
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    missions: Optional[List[MtiListResponseItemMission]] = None
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    origin: Optional[str] = None
+    """
+    Originating system or organization which produced the data, if different from
+    the source. The origin may be different than the source if the source was a
+    mediating system which forwarded the data on behalf of the origin system. If
+    null, the source may be assumed to be the origin.
+    """
+
+    orig_network: Optional[str] = FieldInfo(alias="origNetwork", default=None)
+    """
+    The originating source network on which this record was created, auto-populated
+    by the system.
+    """
+
+    p10: Optional[int] = None
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+    p3: Optional[str] = None
+    """Nationality of the platform providing the data."""
+
+    p6: Optional[str] = None
+    """Control / handling marking."""
+
+    p7: Optional[str] = None
+    """Data record exercise indicator."""
+
+    p8: Optional[str] = None
+    """
+    ID of the platform providing the data (tail number for air platform, name and
+    numerical designator for space-based platforms).
+    """
+
+    p9: Optional[int] = None
+    """
+    Integer field, assigned by the platform, that uniquely identifies the mission
+    for the platform.
+    """
+
+    platform_locs: Optional[List[MtiListResponseItemPlatformLoc]] = FieldInfo(alias="platformLocs", default=None)
+    """
+    A platform-assigned number identifying the specific request or task that
+    pertains to all Dwell, HRR, and Range-Doppler segments in the packet. Job ID is
+    unique within a mission.
+    """
+
+
+MtiListResponse: TypeAlias = List[MtiListResponseItem]