turbo-design 1.0.5__py3-none-any.whl → 1.0.7__py3-none-any.whl

{turbo_design-1.0.5.dist-info → turbo_design-1.0.7.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: turbo-design
-Version: 1.0.5
+Version: 1.0.7
 Summary: TurboDesign is a library used to design turbines and compressors using radial equilibrium.
 Author: Paht Juangphanich
 Author-email: paht.juangphanich@nasa.gov

{turbo_design-1.0.5.dist-info → turbo_design-1.0.7.dist-info}/RECORD

@@ -1,6 +1,6 @@
 turbodesign/__init__.py,sha256=N8Nu0I1vrlEHYJZZ7yhhg-FtbNbLyrgjy7hoicygUqg,325
 turbodesign/arrayfuncs.py,sha256=GHIlTyLfeNsNCQQoh5m1aXK3iyvU6RjdYQipkqpU_ps,519
-turbodesign/bladerow.py,sha256=F94KAARzGd4edOgs2Cd6dSRteyYCR5U45687anYY-As,24042
+turbodesign/bladerow.py,sha256=ztuuHkIL2K3nobbjUPiJcYKvB6Bt_G9A3A1HpY9LQJw,24042
 turbodesign/cantera_gas/co2.yaml,sha256=M2o_RzxV9B9rDkgkXJC-l3voKraFZguTZuKKt4F7S_c,887
 turbodesign/compressorspool.py,sha256=z8ZVczJ-EdZvIqqZArC6UdwC5MbU2SZh_MT2CGq5avY,2600
 turbodesign/coolant.py,sha256=nuj7ryUXuBhuOPt2jHjHwtEM_LVno7A8Wm14P0lJn-8,436
@@ -11,23 +11,23 @@ turbodesign/loss/__init__.py,sha256=ZJomzXa6ElduFruURukCrFwJQXMWS2aW8JSaVQ-M2r8,
 turbodesign/loss/compressor/__init__.py,sha256=AbpHGcgLb-kRsJGnwFEktk7uzpZOCcBY74-YBdrKVGs,1
 turbodesign/loss/losstype.py,sha256=Vzj3UPk1_5IA3DtL56Eb5Z7LkYyMQ97DGZvgfki8ByA,708
 turbodesign/loss/turbine/TD2.py,sha256=evyTG4K6s56NGdjxrZFD3G7zsB8_2lJTBOxT3Ju2uG8,5207
-turbodesign/loss/turbine/__init__.py,sha256=gxTSMzUGgRHaUbG6SWrXg_XsQs7A6LNWeL_EMgHiuoc,286
-turbodesign/loss/turbine/ainleymathieson.py,sha256=cR8T-Uf75p-3cvlg6A3smi68LSJaubA_kSL7iBQw6po,5862
-turbodesign/loss/turbine/craigcox.py,sha256=GZt9lMTPI7U_uIM7IiRlZOYNGegHY0ImVXo5A5S8kJ0,9665
+turbodesign/loss/turbine/__init__.py,sha256=d1UrbiIicO60FhDlOemo_irYW2asUaYoqlXUz-UG9zk,285
+turbodesign/loss/turbine/ainleymathieson.py,sha256=8UbugNmxI12I68HGctJe2lQpqjKZN1b40UOTzqU6hQQ,5861
+turbodesign/loss/turbine/craigcox.py,sha256=TrbNdpGdyD5kTRFKfNmbRDhCOjA0-GT5xoluLQpO1gA,9664
 turbodesign/loss/turbine/fixedefficiency.py,sha256=JJv4GUS5q9pvuf3akjBtlcHOykRYmRVFfDDrdWqH6S4,774
 turbodesign/loss/turbine/fixedpressureloss.py,sha256=jbm8dt8wtyN1RaOgpgYZsvwM0-0lv2Y73kXleyoy0zE,683
-turbodesign/loss/turbine/kackerokapuu.py,sha256=naOolqqQbW8hOoGe70H2WuovUF4zIc_FXrJT1Xan9yI,5073
-turbodesign/loss/turbine/traupel.py,sha256=6DHmeCrPjDlC-Q4XNTm2nQKEt6wx7ECLjCkWPGaF1bo,4165
+turbodesign/loss/turbine/kackerokapuu.py,sha256=hUmZdyA1hAhN3_xbwBhka2dyk0Aq9rqq62S2ghuKSOk,5071
+turbodesign/loss/turbine/traupel.py,sha256=aZxFE9JDcCfi1gy-fqS1SxjjlhuDG-H-g3LPurty1M0,4164
 turbodesign/lossinterp.py,sha256=B2KEobp-nD9jwD6UINgBmTlH9kKyWg3UNvXxqfUsr-k,6198
 turbodesign/outlet.py,sha256=SwTwoL6XnWlsrE5A6wLxu3qXkydDDUsdKKeBbJm4mrQ,2069
 turbodesign/passage.py,sha256=1Erl03ISwV4fTwRjgh2cCTdNpUpT1O4zrZh8xO-1zSU,7577
 turbodesign/radeq.py,sha256=4unpFad6hvgaYwYLBNI8o9bszyvoNiizYjMqRX0Mjcc,10012
 turbodesign/rotor.py,sha256=tHl9o5H4aQ6Etd4gqa8Ime1UK7k0de4GLt5Yb1sJdGs,1376
 turbodesign/solve_radeq.py,sha256=tdVbRAUbXaq8WCOjNUkTLQzND6orRUSEC2je3M_ly5g,1800
-turbodesign/spool.py,sha256=uDmAAZ_ougiHbjQG4qhyaOrxs6qAOXV9eri6mpiUHz0,13073
+turbodesign/spool.py,sha256=-svy5RbNZrrHocq6Fyejz7RA_jS7QwA-BFPx87TV6yI,13048
 turbodesign/stage.py,sha256=UP45sDKDLsAkO_WfDWJ6kqXU7cYKh_4QO01QZnSN1oQ,166
 turbodesign/td_math.py,sha256=I_0cwr38O21MSvsrcTHcx_4N50nTpFKZR1IT-mKqsws,17227
 turbodesign/turbinespool.py,sha256=2f5wT668vRiZSb02R5TM74ZDAXiCUX2ikZCdqzFmkRY,21532
-turbo_design-1.0.5.dist-info/METADATA,sha256=LgTOdiXPLOVGdZDGy0MoHs49Wak6HbMJXPO_GApZCyM,683
-turbo_design-1.0.5.dist-info/WHEEL,sha256=sP946D7jFCHeNz5Iq4fL4Lu-PrWrFsgfLXbbkciIZwg,88
-turbo_design-1.0.5.dist-info/RECORD,,
+turbo_design-1.0.7.dist-info/METADATA,sha256=fRpTVP0uathX8TZb2hFgY952TPQQeTDyYtnJEtTLUho,683
+turbo_design-1.0.7.dist-info/WHEEL,sha256=sP946D7jFCHeNz5Iq4fL4Lu-PrWrFsgfLXbbkciIZwg,88
+turbo_design-1.0.7.dist-info/RECORD,,

turbodesign/bladerow.py

@@ -8,7 +8,7 @@ from .arrayfuncs import convert_to_ndarray
 from cantera import Solution, composite
 from .coolant import Coolant
 from pyturbo.helper import line2D
-from pyturbo.aero.airfoil2D import Airfoil2D
+from pyturbo.aero.airfoil2D import airfoil2D
 from .loss import LossBaseClass
 from .passage import Passage
     
@@ -298,12 +298,12 @@ class BladeRow:
             float: camber length
         """
         if self.row_type == RowType.Stator:
-            a2d = Airfoil2D(np.degrees(self.alpha1.mean()),
+            a2d = airfoil2D(np.degrees(self.alpha1.mean()),
                         np.degrees(self.alpha2.mean()),
                         self.axial_chord,
                         self.stagger)
         else:
-            a2d = Airfoil2D(np.degrees(self.beta1.mean()),
+            a2d = airfoil2D(np.degrees(self.beta1.mean()),
                         np.degrees(self.beta2.mean()),
                         self.axial_chord,
                         self.stagger)

turbodesign/loss/turbine/__init__.py

@@ -4,5 +4,5 @@ from .TD2 import TD2, TD2_Reynolds_Correction
 from .ainleymathieson import AinleyMathieson
 from .fixedefficiency import FixedEfficiency
 from .fixedpressureloss import FixedPressureLoss
-from .kackerokapuu import KrackerOkapuu
+from .kackerokapuu import KackerOkapuu
 from .traupel import Traupel 

turbodesign/loss/turbine/ainleymathieson.py

@@ -28,7 +28,7 @@ class AinleyMathieson(LossBaseClass):
         path = pathlib.Path(os.path.join(os.environ['TD3_HOME'],"ainleymathieson"+".pkl"))
 
         if not path.exists():
-            url = "https://github.com/nasa/turbo-design/blob/main/references/Turbines/AinleyMathieson/ainleymathieson.pkl"
+            url = "https://github.com/nasa/turbo-design/raw/main/references/Turbines/AinleyMathieson/ainleymathieson.pkl"
             response = requests.get(url, stream=True)
             with open(path.absolute(), mode="wb") as file:
                 for chunk in response.iter_content(chunk_size=10 * 1024):

turbodesign/loss/turbine/craigcox.py

@@ -22,7 +22,7 @@ class CraigCox(LossBaseClass):
         
         if not path.exists():
             # Download data from Github 
-            url = "https://github.com/nasa/turbo-design/blob/main/references/Turbines/CraigCox/craigcox.pkl"
+            url = "https://github.com/nasa/turbo-design/raw/main/references/Turbines/CraigCox/craigcox.pkl"
             response = requests.get(url, stream=True)
             with open(path.absolute(), mode="wb") as file:
                 for chunk in response.iter_content(chunk_size=10 * 1024):

turbodesign/loss/turbine/kackerokapuu.py

@@ -8,7 +8,7 @@ import pathlib
 from ..losstype import LossBaseClass
 import requests
 
-class KrackerOkapuu(LossBaseClass):
+class KackerOkapuu(LossBaseClass):
 
     def __init__(self):
         """KackerOkapuu model is an improvement to the Ainley Mathieson model. 
@@ -25,7 +25,7 @@ class KrackerOkapuu(LossBaseClass):
         path = pathlib.Path(os.path.join(os.environ['TD3_HOME'],"kackerokapuu"+".pkl"))
         
         if not path.exists():
-            url = "https://github.com/nasa/turbo-design/blob/main/references/Turbines/KackerOkapuu/kackerokapuu.pkl"
+            url = "https://github.com/nasa/turbo-design/raw/main/references/Turbines/KackerOkapuu/kackerokapuu.pkl"
             response = requests.get(url, stream=True)
             with open(path.absolute(), mode="wb") as file:
                 for chunk in response.iter_content(chunk_size=10 * 1024):

turbodesign/loss/turbine/traupel.py

@@ -14,7 +14,7 @@ class Traupel(LossBaseClass):
         path = pathlib.Path(os.path.join(os.environ['TD3_HOME'],"traupel"+".pkl"))
 
         if not path.exists():
-            url = "https://github.com/nasa/turbo-design/blob/main/references/Turbines/Traupel/traupel.pkl"
+            url = "https://github.com/nasa/turbo-design/raw/main/references/Turbines/Traupel/traupel.pkl"
             response = requests.get(url, stream=True)
             with open(path.absolute(), mode="wb") as file:
                 for chunk in response.iter_content(chunk_size=10 * 1024):

turbodesign/spool.py

@@ -16,7 +16,7 @@ from .inlet import Inlet
 from .outlet import Outlet 
 
 class Spool:
-    blade_rows: List[BladeRow] = []
+    blade_rows:List[BladeRow]=[]
     massflow:float=0
     rpm:float = 0
     
@@ -115,8 +115,7 @@ class Spool:
         Example: 
             # Station 0 has angles of [73.1,74.2,75.4] 
             # Station 5 has angles of [69,69,69] 
-            beta =  {0: [73.1,74.2,75.4],
-                      5: [69,69,69]}
+            beta =  {0: [73.1,74.2,75.4], 5: [69,69,69]}
 
         """
         for k,v in radius.items():