ttp_templates 0.2.0__py3-none-any.whl

ttp_templates/__init__.py

@@ -0,0 +1,2 @@
+from .ttp_templates import get_template
+from .ttp_templates import parse_output

ttp_templates/misc/N2G/cli_ip_data/a10.txt

@@ -0,0 +1,23 @@
+<template name="a10" results="per_template">
+
+<doc>
+Template to parse A10 devices interfaces configuration and IP ARP cache.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}">
+interface {{ interface | PHRASE | resuball("IfsNormalize") }}
+  description {{ port_description | re(".+") }}
+  <group name="ip_addresses*" chain="add_network()" method="table">
+  ip address {{ ip | IP }} {{ netmask }}
+  </group>
+</group>
+
+<!-- ARP cache group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}.arp*" method="table">
+{{ ip | IP }}  {{ mac | MAC | mac_eui }}  Dynamic  {{ age }}    {{ interface | PHRASE | resuball("IfsNormalize") }}  {{ vlan }} 
+</group>
+
+</template>

ttp_templates/misc/N2G/cli_ip_data/cisco_ios.txt

@@ -0,0 +1,33 @@
+<template name="cisco_ios" results="per_template">
+
+<doc>
+Template to parse Cisco IOS interfaces configuration and ARP cache.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}">
+interface {{ interface | resuball("IfsNormalize") }}
+ description {{ port_description | re(".+") }}
+ vrf forwarding {{ vrf }}
+ ip vrf forwarding {{ vrf }}
+ ip access-group {{ ACL_IN }} in
+ ip access-group {{ ACL_OUT }} out
+ <group name="ip_addresses*" chain="add_network()" method="table">
+ ip address {{ ip | IP }} {{ netmask }}
+ ip address {{ ip | IP }} {{ netmask }} secondary
+ </group>
+ <group name="fhrp*" method="table">
+ standby {{ group | let("type", "HSRP") }}  {{ ip | IP }}
+ vrrp {{ group | let("type", "VRRP") }} ip {{ ip | IP }}
+ </group>
+! {{ _end_ }}
+</group>
+
+<!-- ARP cache group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}.arp*" method="table">
+Internet  {{ ip | IP }}     {{ age }}   {{ mac | MAC | mac_eui }}  {{ type }}   {{ interface | resuball("IfsNormalize") }}
+</group>
+
+</template>

ttp_templates/misc/N2G/cli_ip_data/cisco_nxos.txt

@@ -0,0 +1,39 @@
+<template name="cisco_nxos" results="per_template">
+
+<doc>
+Template to parse Cisco NXOS interfaces configuration and ARP cache.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}">
+interface {{ interface | resuball("IfsNormalize") }}
+  description {{ port_description | re(".+") }}
+  vrf member {{ vrf }}
+  ip access-group {{ ACL_IN }} in
+  ip access-group {{ ACL_OUT }} out
+ <group name="ip_addresses*" chain="add_network()" method="table">
+  ip address {{ ip | IP }}/{{ netmask }}
+  ip address {{ ip | IP }}/{{ netmask }} secondary
+ </group>
+ <group name="fhrp*" method="table">
+  <group>
+  hsrp {{ group | let("type", "HSRP") }}  
+    ip {{ ip | IP }}
+  </group>
+  <group>
+  vrrpv3 {{ group | let("type", "VRRP") }} address-family ipv4
+    address {{ ip | IP }} primary
+  </group>
+ </group>
+! {{ _end_ }}
+</group>
+
+<!-- ARP cache group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}.arp*" method="table">
+{{ ip | IP }}    {{ age }}  {{ mac | MAC | mac_eui }}  {{ interface | resuball("IfsNormalize") }}
+{{ ip | IP }}    {{ age }}  {{ mac | MAC | mac_eui }}  {{ interface | resuball("IfsNormalize") }}  *
+</group>
+
+</template>

ttp_templates/misc/N2G/cli_ip_data/cisco_xr.txt

@@ -0,0 +1,30 @@
+<template name="cisco_xr" results="per_template">
+
+<doc>
+Template to parse Cisco IOSXR interfaces configuration and ARP cache.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<group record="local_hostname" void="">
+hostname {{ local_hostname }}
+</group>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}">
+interface {{ interface | resuball("IfsNormalize") }}
+ description {{ port_description | re(".+") }}
+ vrf {{ vrf }}
+ <group name="ip_addresses*" chain="add_network()" method="table">
+ ipv4 address {{ ip | IP }} {{ netmask }}
+ ipv4 address {{ ip | IP }} {{ netmask }} secondary
+ </group>
+! {{ _end_ }}
+</group>
+
+<!-- ARP cache group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}.arp*" method="table">
+{{ ip | IP }} {{ age | replace("-", "-1") }} {{ mac | MAC| mac_eui }}  {{ ignore }}  {{ ignore }} {{ interface | resuball("IfsNormalize") }}
+</group>
+
+</template>

ttp_templates/misc/N2G/cli_ip_data/fortinet.txt

@@ -0,0 +1,32 @@
+<template name="fortinet" results="per_template">
+
+<doc>
+Template to parse Fortinet fortigate firewalls interfaces configuration and ARP cache.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces**">
+config system interface {{ _start_ }}
+    <group name="{{ interface }}">
+    edit "{{ interface }}"
+        set description "{{ port_description | re(".+") }}"
+        set vdom "{{ vrf }}"
+        set allowaccess {{ ACL_IN | ORPHRASE }}
+        set interface "{{ parent_interface }}"
+        set vlanid {{ vid }}
+        <group name="ip_addresses*" chain="add_network()" method="table">
+        set ip {{ ip | IP }} {{ netmask }}
+                set ip {{ ip | IP }} {{ netmask }}
+        </group>
+    next{{ _end_ }}
+    </group>    
+</group>    
+
+<!-- ARP cache group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}.arp*" method="table">
+{{ ip | IP }}      {{ age }}   {{ mac | MAC | mac_eui }}    {{ interface }}
+</group>
+
+</template>

ttp_templates/misc/N2G/cli_ip_data/huawei.txt

@@ -0,0 +1,33 @@
+<template name="huawei" results="per_template">
+
+<doc>
+Template to parse Huawei interfaces configuration and ARP cache.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}">
+interface {{ interface | resuball("IfsNormalize") }}
+ description {{ port_description | re(".+") }}
+ ip binding vpn-instance {{ vrf }}
+ <group name="ip_addresses*" chain="add_network()" method="table">
+ ip address {{ ip | IP }} {{ netmask }}
+ ip address {{ ip | IP }} {{ netmask }} sub
+ ipv6 address {{ ip | IPV6 }}/{{ netmask }}
+ ipv6 address {{ ip | IPV6 }}/{{ netmask }} sub
+ </group>
+ <group name="fhrp*" method="table">
+ vrrp vrid {{ group | let("type", "VRRP") }} virtual-ip {{ ip | IP }}
+ </group>
+</group>
+
+<!-- ARP cache group -->
+<group name="{{ local_hostname }}.interfaces.{{ interface }}.arp*" method="table">
+{{ ip | IP }}   {{ mac | MAC | mac_eui }}  {{ expire | re("\\d+") }}  {{ type | notdigit }}  {{ interface | resuball("IfsNormalize") }}   {{ vrf }}
+{{ ip | IP }}   {{ mac | MAC | mac_eui }}                             {{ type | notdigit }}  {{ interface | resuball("IfsNormalize") }}   {{ vrf }}
+{{ ip | IP }}   {{ mac | MAC | mac_eui }}  {{ expire | re("\\d+") }}  {{ type | notdigit }}  {{ interface | resuball("IfsNormalize") }}
+{{ ip | IP }}   {{ mac | MAC | mac_eui }}                             {{ type | notdigit }}  {{ interface | resuball("IfsNormalize") }}
+</group>
+
+</template>

ttp_templates/misc/N2G/cli_ip_data/readme.md

@@ -0,0 +1,53 @@
+# cli_ip_data Templates
+
+cli_ip_data templates designed to parse show commands output from networking devices into a
+structured data for the use of N2G application to produce diagrams.
+
+Parsing results example:
+
+```
+{'cisco_ios': {'switch_1': {'interfaces': {'SVI123': {'arp': [{'age': '-',
+                                                               'ip': '10.123.111.1',
+                                                               'mac': 'd094.6643.1111',
+                                                               'type': 'ARPA'}],
+                                                      'ip_addresses': [{'ip': '10.123.111.1',
+                                                                        'netmask': '24',
+                                                                        'network': '10.123.111.0/24'},
+                                                                       {'ip': '10.123.222.1',
+                                                                        'netmask': '24',
+                                                                        'network': '10.123.222.0/24'}],
+                                                      'port_description': 'Workstations Vlan',
+                                                      'vrf': 'CORP'}}},
+               'switch_2': {'interfaces': {'SVI11': {'ip_addresses': [{'ip': '10.11.11.1',
+                                                                       'netmask': '24',
+                                                                       'network': '10.11.11.0/24'}],
+                                                     'port_description': 'Workstations Vlan'},
+                                           'SVI22': {'arp': [{'age': '-',
+                                                              'ip': '10.22.22.1',
+                                                              'mac': 'd094.7890.1111',
+                                                              'type': 'ARPA'},
+                                                             {'age': '106',
+                                                              'ip': '10.22.22.4',
+                                                              'mac': 'd867.7890.1444',
+                                                              'type': 'ARPA'}],
+                                                     'ip_addresses': [{'ip': '10.22.22.1',
+                                                                       'netmask': '24',
+                                                                       'network': '10.22.22.0/24'}],
+                                                     'port_description': 'Workstations Vlan'},
+                                           'Te1/1/71': {'arp': [{'age': '5',
+                                                                 'ip': '10.1.234.1',
+                                                                 'mac': 'd867.d9b7.1111',
+                                                                 'type': 'ARPA'}],
+                                                        'fhrp': [{'hsrp_group': '1',
+                                                                 'vip': '10.1.234.1.99',
+                                                                 'type': 'hsrp'}],
+                                                        'ip_addresses': [{'ip': '10.1.234.2',
+                                                                          'netmask': '24',
+                                                                          'network': '10.1.234.0/24'}],
+                                                        'port_description': 'to SWITCH_2 shared '
+                                                                            'subnet'}}}}}
+```
+
+Parsing results schema:
+
+TBD

ttp_templates/misc/N2G/cli_isis_data/cisco_xr.txt

@@ -0,0 +1,12 @@
+<doc>
+Template to parse Cisco IOSXR "show isis database verbose" output.
+</doc>
+
+<input load="python">
+# Starting with Netmiko 3.4.0 can use run_ttp method to populate this template with below commands output
+commands = [
+    "show isis database verbose",
+]
+</input>
+
+<extend template="ttp://platform/cisco_xr_show_isis_database_verbose.txt"/>

ttp_templates/misc/N2G/cli_isis_data/juniper.txt

@@ -0,0 +1,12 @@
+<doc>
+Template to parse Juniper JunOS "show isis database extensive | no-more" output.
+</doc>
+
+<input load="python">
+# Starting with Netmiko 3.4.0 can use run_ttp method to populate this template with below commands output
+commands = [
+    "show isis database extensive | no-more",
+]
+</input>
+
+<extend template="ttp://platform/juniper_show_isis_database_verbose_pipe_no_more.txt"/>

ttp_templates/misc/N2G/cli_isis_data/readme.md

@@ -0,0 +1,14 @@
+# cli_isis_data Templates
+
+cli_isis_data template designed for use with N2G library to produce network diagrams based on ISIS 
+link state database of Cisco IOS-XR devices. 
+
+Caveats:
+
+ - need `ttp>=0.8.0` for extend to work
+ 
+Results structure example:
+
+```
+TBD
+```

ttp_templates/misc/N2G/cli_l2_data/cisco_ios.txt

@@ -0,0 +1,72 @@
+<template name="cisco_ios" results="per_template">
+
+<doc>
+This template designed to parse Cisco IOS configuration and CDP and LLDP neighbors.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<macro>
+def process_vlans(data):
+    return {data["vid"]: data["name"]}
+    
+def check_is_physical_port(data):
+    for item in _ttp_["vars"]["physical_ports"]:
+        if data.startswith(item) and not "." in item:
+            return data, {"is_physical_port": True}
+    return data
+</macro>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**">
+interface {{ interface | resuball(IfsNormalize) }}
+ description {{ description | re(".+") }}
+ switchport {{ is_l2 | set(True) }}
+ switchport access vlan {{ access_vlan }}
+ switchport mode {{ l2_mode }}
+ vrf forwarding {{ vrf }}
+ ip address {{ ip | PHRASE | joinmatches(",") }}
+ ip address {{ ip | PHRASE | joinmatches(",") }} secondary
+ switchport trunk allowed vlan {{ trunk_vlans | unrange("-", ",") | joinmatches(",") }}
+ channel-group {{ lag_id | DIGIT }} mode {{ lag_mode }}
+ mtu {{ mtu }}
+</group>
+
+<!-- Interfaces state group -->
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**.state">
+{{ interface | _start_ | resuball(IfsNormalize) | macro("check_is_physical_port") }} is {{ admin | ORPHRASE }}, line protocol is {{ line }}
+{{ interface | _start_ | resuball(IfsNormalize) | macro("check_is_physical_port") }} is {{ admin | ORPHRASE }}, line protocol is {{ line }} ({{ line_status }})
+  Description: {{ description | re(".+") }} 
+  Hardware is {{ hardware | ORPHRASE }}, address is {{ mac }} (bia {{ ignore }})
+  MTU {{ mtu }} bytes, BW {{ bw_kbits }} Kbit/sec, DLY 1000 usec, 
+  {{ duplex }}-duplex, {{ link_type }}, media type is {{ media_type }}
+  {{ duplex }}-duplex, {{ link_speed }}-speed, link type is {{ link_type }}, media type is {{ media_type | ORPHRASE }}
+  {{ duplex }}-duplex, {{ link_speed }}, link type is {{ link_type }}, media type is {{ media_type | ORPHRASE }}
+  Members in this channel: {{ lag_members | ORPHRASE }}
+</group>
+
+<!-- node_facts VLANs group -->
+<group name="{{ local_hostname }}.node_facts.vlans**" macro="process_vlans">
+vlan {{ vid }}
+ name {{ name | ORPHRASE | default("no name") }}
+</group>
+
+<!-- LLDP peers group -->
+<group name="{{ local_hostname }}.lldp_peers*" expand="">
+Local Intf: {{ src_label | resuball(IfsNormalize) }}
+Port id: {{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+System Name: {{ target.id | split(".") | item(0) | split("(") | item(0) }}
+System Capabilities: {{ ignore(ORPHRASE) }}
+    IP: {{ target.top_label }}
+{{ source | set("local_hostname") }}
+</group>
+
+<!-- CDP peers group -->
+<group name="{{ local_hostname }}.cdp_peers*" expand="">
+Device ID: {{ target.id | split(".") | item(0) | split("(") | item(0) }}
+  IP address: {{ target.top_label }}
+Platform: {{ target.bottom_label | ORPHRASE }},  Capabilities: {{ ignore(ORPHRASE) }}
+Interface: {{ src_label | resuball(IfsNormalize) }},  Port ID (outgoing port): {{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+{{ source | set("local_hostname") }}
+</group>
+</template>

ttp_templates/misc/N2G/cli_l2_data/cisco_nxos.txt

@@ -0,0 +1,90 @@
+<template name="cisco_nxos" results="per_template">
+
+<doc>
+This template designed to parse Cisco NXOS configuration and CDP and LLDP neighbors.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<macro>
+def process_vlans(data):
+    return {data["vid"]: data["name"]}
+    
+def check_is_physical_port(data):
+    for item in _ttp_["vars"]["physical_ports"]:
+        if data.startswith(item) and not "." in data:
+            return data, {"is_physical_port": True}
+    return data
+</macro>
+
+<macro>
+def check_lldp_peer_name(data):
+    undef_names = ["not advertised", "null"]
+    if data.get("target.id", "").lower() in undef_names:
+        data["target.id"] = data["data.chassis_id"]
+    return data
+</macro>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**">
+interface {{ interface | resuball(IfsNormalize) }}
+  description {{ description | re(".+") }}
+  switchport {{ is_l2 | set(True) }}
+  switchport access vlan {{ access_vlan }}
+  switchport mode {{ l2_mode }}
+  switchport trunk allowed vlan {{ trunk_vlans | unrange("-", ",") | joinmatches(",") }}
+  switchport trunk allowed vlan add {{ trunk_vlans | unrange("-", ",") | joinmatches(",") }}
+  channel-group {{ lag_id | DIGIT }} mode {{ lag_mode }}
+  vpc {{ mlag_id | DIGIT }}
+  mtu {{ mtu }}
+  vrf member {{ vrf }}
+  ip address {{ ip | joinmatches(",") }} 
+  ip address {{ ip | joinmatches(",") }} secondary 
+</group>
+
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**.state">
+{{ interface | _start_ | resuball(IfsNormalize) | macro("check_is_physical_port") }} is {{ admin | ORPHRASE }}, line protocol is {{ line }}, autostate enabled
+{{ interface | _start_ | resuball(IfsNormalize) | macro("check_is_physical_port") }} is {{ line | ORPHRASE }}
+admin state is {{ admin | ORPHRASE }},{{ ignore(".*") }}
+admin state is {{ admin }}
+  Belongs to {{ parent_lag }}
+  Description: {{ description | re(".+") }} 
+  Hardware: {{ hardware | ORPHRASE }}, address: {{ mac }} (bia {{ bia }})
+  Hardware is {{ hardware }}, address is  {{ mac }}
+  MTU {{ mtu }} bytes, BW {{ bw_kbits }} Kbit, DLY 10 usec
+  Port mode is {{ mode }}
+  {{ duplex }}-duplex, {{ link_speed | PHRASE }}, media type is {{ media_type }}
+  {{ duplex }}-duplex, {{ link_speed | PHRASE | exclude(",media") }}
+  Members in this channel: {{ lag_members | ORPHRASE }}
+</group>
+
+<!-- node_facts VLANs group -->
+<group name="{{ local_hostname }}.node_facts.vlans**" macro="process_vlans">
+vlan {{ vid | exclude(",") }}
+  name {{ name | ORPHRASE | default("no name") }}
+</group>
+
+<!-- LLDP peers group -->
+<group name="{{ local_hostname }}.lldp_peers*" chain="macro('check_lldp_peer_name') | expand()">
+Chassis id: {{ data.chassis_id }}
+Port id: {{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+Local Port id: {{ src_label | resuball(IfsNormalize) }}
+Port Description: {{ data.peer_port_description | re(".+") }}
+System Name: {{ target.id | ORPHRASE | split(".") | item(0) | split("(") | item(0) }}
+System Description: {{ data.peer_system | ORPHRASE}}
+System Capabilities: {{ data.peer_capabilities | ORPHRASE }}
+Management Address: {{ target.top_label }}
+{{ source | set("local_hostname") }}
+</group>
+
+<!-- CDP peers group -->
+<group name="{{ local_hostname }}.cdp_peers*" expand="">
+Device ID:{{ target.id | split(".") | item(0) | split("(") | item(0) }}
+    IPv4 Address: {{ target.top_label }}
+Platform: {{ target.bottom_label | ORPHRASE }}, Capabilities: {{ data.peer_capabilities | ORPHRASE }}
+Interface: {{ src_label | resuball(IfsNormalize) }}, Port ID (outgoing port): {{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+MTU: {{ data.peer_mtu }}
+Physical Location: {{ data.peer_location | ORPHRASE }}
+{{ source | set("local_hostname") }}
+</group>
+</template>

ttp_templates/misc/N2G/cli_l2_data/cisco_xr.txt

@@ -0,0 +1,105 @@
+<template name="cisco_xr" results="per_template">
+
+<doc>
+This template designed to parse Cisco IOSXR configuration and CDP and LLDP neighbors.
+
+Commands parsed:
+
+- show lldp - to extract local hostname
+- show lldp neighbors detail - to extract LLDP neighbors
+- show running-config interface - to extract interfaces description and LAGs
+- show cdp neighbors detail - show extract CDP neighbors
+- show interfaces - to extract interface state to add all connected nodes
+</doc>
+
+<!-- gethostname used if no show lldp output provided -->
+<vars>local_hostname="gethostname"</vars>
+
+<macro>
+def check_is_physical_port(data):
+    for item in _ttp_["vars"]["physical_ports"]:
+        if data.startswith(item) and not "." in item:
+            return data, {"is_physical_port": True}
+    return data
+    
+def add_lldp_target_id(data):
+    """
+    Some LLDP peers output does not contain System Name, this macro 
+    is to make sure we assign chassis_id as target.id in that case.
+    """
+    if (
+        not data.get("target", {}).get("id") and 
+        data.get("data", {}).get("chassis_id")
+    ):
+        data.setdefault("target", {})
+        data["target"]["id"] = data["data"]["chassis_id"]
+    return data
+</macro>
+
+<!-- show lldp - parse global params -->
+<group void="">
+Global LLDP information: {{ _start_ }}
+        LLDP System Name: {{ local_hostname | record("local_hostname") }}
+</group>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**">
+interface {{ interface | resuball(IfsNormalize) }}
+ mtu {{ mtu }}
+ vrf {{ vrf }}
+ description {{ description | re(".+") }}
+ ipv4 address {{ ip | PHRASE | joinmatches(",") }}
+ ipv4 address {{ ip | PHRASE | joinmatches(",") }} secondary
+ ipv6 address {{ ip | joinmatches(",") }}
+ bundle id {{ lag_id | DIGIT }} mode {{ lag_mode }}
+</group>
+
+<!-- Interfaces state group -->
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**.state">
+{{ interface | _start_ | resuball(IfsNormalize) | macro("check_is_physical_port") }} is {{ admin | ORPHRASE }}, line protocol is {{ line | ORPHRASE }}
+  Hardware is {{ hardware }} interface(s)
+  Hardware is {{ hardware }} interface
+  Hardware is {{ hardware | ORPHRASE }} interface(s), address is {{ mac }}
+  Hardware is {{ hardware | ORPHRASE }}, address is {{ mac }} (bia {{ ignore }})
+  Description: {{ description | re(".+") }}
+  Internet address is {{ ip }}
+  MTU {{ mtu }} bytes, BW {{ bw_kbits }} Kbit (Max: 1000000 Kbit)
+  MTU {{ mtu }} bytes, BW {{ bw_kbits }} Kbit
+  {{ duplex }}-duplex, {{ link_speed }}
+  {{ duplex }}-duplex, {{ link_speed }}, link type is {{ link_type }}
+  {{ duplex }}-duplex, {{ link_speed }}, {{ media_type }}, link type is {{ link_type }}
+      {{ lag_members | joinmatches(" ") }}  {{ ignore }}-duplex  {{ ignore }} {{ ignore }}
+</group>
+
+<!-- LLDP peers group -->
+<group name="{{ local_hostname }}.lldp_peers*" functions="expand() | macro(add_lldp_target_id)">
+Local Interface: {{ src_label | resuball(IfsNormalize) }}
+Chassis id: {{ data.chassis_id }}
+Port id: {{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+Port Description: {{ data.peer_port_description | re(".+") }}
+System Name: {{ target.id | split("(") | item(0) }}
+System Name: {{ data.peer_system_name | PHRASE }}
+System Capabilities: {{ data.peer_capabilities | ORPHRASE }}
+  IPv4 address: {{ target.top_label }}
+{{ source | set("local_hostname") }}
+
+<group name="data**">
+System Description: {{ _start_ }}
+ {{ peer_system_description | ORPHRASE | contains(",") }}
+{{ peer_system_description | ORPHRASE | contains(",") }}
+{{ _end_ }}
+</group>
+
+</group>
+
+
+<!-- CDP peers group -->
+<group name="{{ local_hostname }}.cdp_peers*" expand="">
+Device ID: {{ target.id | split(".") | item(0) | split("(") | item(0) }}
+  IPv4 address: {{ target.top_label }}
+Platform: {{ target.bottom_label | ORPHRASE }},  Capabilities: {{ data.peer_capabilities | ORPHRASE }}
+Interface: {{ src_label | resuball(IfsNormalize) }}
+Port ID (outgoing port): {{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+{{ source | set("local_hostname") }}
+</group>
+</template>

ttp_templates/misc/N2G/cli_l2_data/huawei.txt

@@ -0,0 +1,79 @@
+<template name="huawei" results="per_template">
+
+<doc>
+This template designed to parse Huawei configuration and LLDP neighbors.
+</doc>
+
+<vars>local_hostname="gethostname"</vars>
+
+<macro>
+def process_vlans(data):
+    return {data["vid"]: data["name"]}
+
+def check_is_physical_port(data):
+    for item in _ttp_["vars"]["physical_ports"]:
+        if data.startswith(item) and not "." in data:
+            return data, {"is_physical_port": True}
+    return data
+</macro>
+
+<macro>
+def check_lldp_peer_name(data):
+    undef_names = ["not advertised", "null", "--"]
+    if data.get("target.id", "").lower() in undef_names:
+        data["target.id"] = data["data.chassis_id"]
+    return data
+    
+def lldp_choose_bottom_label(data):
+    if "target.bottom_label_2" in data:
+        data["target.bottom_label"] = data.pop("target.bottom_label_2")
+    elif "target.bottom_label" in data:
+        data["data.peer_system"] = str(data["target.bottom_label"])
+        data["target.bottom_label"] = "{}..".format(data["target.bottom_label"][:18])
+    return data
+</macro>
+
+<!-- Interfaces configuration group -->
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**">
+interface {{ interface | resuball(IfsNormalize) }}
+ description {{ description | re(".+") }}
+ port link-type {{ l2_mode }}
+ dot1q termination vid {{ dot1q_vid }}
+ port trunk allow-pass vlan {{ trunk_vlans | unrange("to", " ") | replace(' ', ',') | joinmatches(",") }}
+ port trunk allow-pass vlan all {{ trunk_vlans | set("ALL") }}
+ dfs-group 1 m-lag {{ mlag_id | DIGIT }}
+ eth-trunk {{ lag_id | DIGIT }}
+ mode {{ lag_mode }}
+ port trunk pvid vlan {{ access_vlan }}
+ ip address {{ ip | PHRASE | joinmatches(",") }}
+ ip binding vpn-instance {{ vrf }}
+ peer-link 1 {{ peer_link | set(True) }}
+</group>
+
+<!-- Interfaces state group
+<group name="{{ local_hostname }}.interfaces**.{{ interface }}**.state">
+
+</group>
+ -->
+
+<!-- node_facts VLANs group -->
+<group name="{{ local_hostname }}.node_facts.vlans**" macro="process_vlans">
+vlan {{ vid | exclude(",") }}
+ name {{ name | ORPHRASE | default("no name") }}
+</group>
+
+<!-- LLDP peers group -->
+<group name="{{ local_hostname }}.lldp_peers*" chain="macro('check_lldp_peer_name') | macro(lldp_choose_bottom_label) | expand()">
+{{ src_label | resuball(IfsNormalize) }}  has 1 neighbor(s):
+Port ID                            :{{ trgt_label | ORPHRASE | resuball(IfsNormalize) }}
+Chassis ID                         :{{ data.chassis_id }}
+System name                        :{{ target.id | split(".") | item(0) | split("(") | item(0) }}
+HUAWEI {{ target.bottom_label_2 }}
+System description                 :{{ target.bottom_label | ORPHRASE }}
+Port description                   :{{ data.peer_port_description | re(".+") | notequal("--") }}
+System capabilities supported      :{{ data.peer_capabilities | ORPHRASE | notequal("--") }}
+Maximum frame Size                 :{{ data.peer_mtu | notequal("--") }}
+Management address                 :{{ target.top_label }}
+{{ source | set("local_hostname") }}
+</group>
+</template>