tplinkrouterc6u 5.3.0__py3-none-any.whl → 5.4.1__py3-none-any.whl

test/test_client_c1200.py

@@ -3,41 +3,45 @@ from json import loads
 from tplinkrouterc6u import (
     TplinkC1200Router,
     Connection,
-    ClientException
+    ClientException,
 )
+from tplinkrouterc6u.common.package_enum import VPN
 
 
 class TestTPLinkC1200Client(TestCase):
-
     def test_set_led_on(self) -> None:
-
-        response_led_general_read = '''
+        response_led_general_read = """
         {
             "enable": "off",
             "time_set": "yes",
             "ledpm_support": "yes"
         }
-        '''
+        """
 
-        response_led_general_write = '''
+        response_led_general_write = """
         {
             "enable": "on",
             "time_set": "yes",
             "ledpm_support": "yes"
         }
-        '''
+        """
 
         class TPLinkRouterTest(TplinkC1200Router):
-            def request(self, path: str, data: str,
-                        ignore_response: bool = False, ignore_errors: bool = False) -> dict | None:
-                if path == 'admin/ledgeneral?form=setting&operation=read':
+            def request(
+                self,
+                path: str,
+                data: str,
+                ignore_response: bool = False,
+                ignore_errors: bool = False,
+            ) -> dict | None:
+                if path == "admin/ledgeneral?form=setting&operation=read":
                     return loads(response_led_general_read)
-                if path == 'admin/ledgeneral?form=setting&operation=write':
+                if path == "admin/ledgeneral?form=setting&operation=write":
                     self.captured_path = path
                     return loads(response_led_general_write)
                 raise ClientException()
 
-        client = TPLinkRouterTest('', '')
+        client = TPLinkRouterTest("", "")
 
         client.set_led(True)
 
@@ -46,34 +50,38 @@ class TestTPLinkC1200Client(TestCase):
         self.assertEqual(client.captured_path, expected_path)
 
     def test_set_led_off(self) -> None:
-
-        response_led_general_read = '''
+        response_led_general_read = """
         {
             "enable": "on",
             "time_set": "yes",
             "ledpm_support": "yes"
         }
-        '''
+        """
 
-        response_led_general_write = '''
+        response_led_general_write = """
         {
             "enable": "off",
             "time_set": "yes",
             "ledpm_support": "yes"
         }
-        '''
+        """
 
         class TPLinkRouterTest(TplinkC1200Router):
-            def request(self, path: str, data: str,
-                        ignore_response: bool = False, ignore_errors: bool = False) -> dict | None:
-                if path == 'admin/ledgeneral?form=setting&operation=read':
+            def request(
+                self,
+                path: str,
+                data: str,
+                ignore_response: bool = False,
+                ignore_errors: bool = False,
+            ) -> dict | None:
+                if path == "admin/ledgeneral?form=setting&operation=read":
                     return loads(response_led_general_read)
-                elif path == 'admin/ledgeneral?form=setting&operation=write':
+                if path == "admin/ledgeneral?form=setting&operation=write":
                     self.captured_path = path
                     return loads(response_led_general_write)
                 raise ClientException()
 
-        client = TPLinkRouterTest('', '')
+        client = TPLinkRouterTest("", "")
 
         client.set_led(False)
 
@@ -82,37 +90,44 @@ class TestTPLinkC1200Client(TestCase):
         self.assertEqual(client.captured_path, expected_path)
 
     def test_led_status(self) -> None:
-
-        response_led_general_read = '''
+        response_led_general_read = """
         {
             "enable": "on",
             "time_set": "yes",
             "ledpm_support": "yes"
         }
-        '''
+        """
 
         class TPLinkRouterTest(TplinkC1200Router):
-            def request(self, path: str, data: str,
-                        ignore_response: bool = False, ignore_errors: bool = False) -> dict | None:
-                if path == 'admin/ledgeneral?form=setting&operation=read':
+            def request(
+                self,
+                path: str,
+                data: str,
+                ignore_response: bool = False,
+                ignore_errors: bool = False,
+            ) -> dict | None:
+                if path == "admin/ledgeneral?form=setting&operation=read":
                     return loads(response_led_general_read)
                 raise ClientException()
 
-        client = TPLinkRouterTest('', '')
+        client = TPLinkRouterTest("", "")
 
         led_status = client.get_led()
         self.assertTrue(led_status)
 
     def test_set_wifi(self) -> None:
-
         class TPLinkRouterTest(TplinkC1200Router):
-            def request(self, path: str, data: str,
-                        ignore_response: bool = False, ignore_errors: bool = False) -> dict | None:
-
+            def request(
+                self,
+                path: str,
+                data: str,
+                ignore_response: bool = False,
+                ignore_errors: bool = False,
+            ) -> dict | None:
                 self.captured_path = path
                 self.captured_data = data
 
-        client = TPLinkRouterTest('', '')
+        client = TPLinkRouterTest("", "")
         client.set_wifi(
             Connection.HOST_5G,
             enable=True,
@@ -126,17 +141,119 @@ class TestTPLinkC1200Client(TestCase):
             htmode="VHT20",
             channel=36,
             txpower="20",
-            disabled_all="no"
+            disabled_all="no",
         )
 
-        expected_data = ("operation=write&enable=on&ssid=TestSSID&hidden=no&encryption=WPA3-PSK&"
-                         "psk_version=2&psk_cipher=AES&psk_key=testkey123&hwmode=11ac&"
-                         "htmode=VHT20&channel=36&txpower=20&disabled_all=no")
+        expected_data = (
+            "operation=write&enable=on&ssid=TestSSID&hidden=no&encryption=WPA3-PSK&"
+            "psk_version=2&psk_cipher=AES&psk_key=testkey123&hwmode=11ac&"
+            "htmode=VHT20&channel=36&txpower=20&disabled_all=no"
+        )
         expected_path = f"admin/wireless?form=wireless_5g&{expected_data}"
 
         self.assertEqual(client.captured_path, expected_path)
         self.assertEqual(client.captured_data, expected_data)
 
+    def test_vpn_status(self) -> None:
+        response_openvpn_read = """
+        {
+            "enabled": "on",
+            "proto": "udp",
+            "access": "home",
+            "cert_exist": true,
+            "mask": "255.255.255.0",
+            "port": "1194",
+            "serverip": "10.8.0.0"
+        }
+        """
+
+        response_pptp_read = """
+        {
+            "enabled": "off",
+            "unencrypted_access": "on",
+            "samba_access": "on",
+            "netbios_pass": "on",
+            "remoteip": "10.0.0.11-20"
+        }
+        """
+
+        respone_vpnconn_openvpn = """[
+            {"username": "admin", "remote_ip": "192.168.0.200", "ipaddr": "10.0.0.11",
+             "extra": "7450", "vpntype": "openvpn", "key": "7450"},
+            {"username": "admin", "remote_ip": "192.168.0.200", "ipaddr": "10.0.0.11",
+             "extra": "7450", "vpntype": "openvpn", "key": "7450"}
+        ]"""
+
+        respone_vpnconn_pptpvpn = """[
+            {"username": "admin", "remote_ip": "192.168.0.200", "ipaddr": "10.0.0.11",
+             "extra": "7450", "vpntype": "pptp", "key": "7450"},
+            {"username": "admin", "remote_ip": "192.168.0.200", "ipaddr": "10.0.0.11",
+             "extra": "7450", "vpntype": "pptp", "key": "7450"},
+            {"username": "admin", "remote_ip": "192.168.0.200", "ipaddr": "10.0.0.11",
+             "extra": "7450", "vpntype": "pptp", "key": "7450"}
+        ]"""
+
+        class TPLinkRouterTest(TplinkC1200Router):
+            def request(
+                self,
+                path: str,
+                data: str,
+                ignore_response: bool = False,
+                ignore_errors: bool = False,
+            ) -> dict | None:
+                if path == "/admin/openvpn?form=config&operation=read":
+                    return loads(response_openvpn_read)
+                if path == "/admin/pptpd?form=config&operation=read":
+                    return loads(response_pptp_read)
+                if path == "/admin/vpnconn?form=config&operation=list&vpntype=openvpn":
+                    return loads(respone_vpnconn_openvpn)
+                if path == "/admin/vpnconn?form=config&operation=list&vpntype=pptp":
+                    return loads(respone_vpnconn_pptpvpn)
+                raise ClientException()
+
+        client = TPLinkRouterTest("", "")
+
+        vpn_status = client.get_vpn_status()
+        self.assertTrue(vpn_status.openvpn_enable)
+        self.assertFalse(vpn_status.pptpvpn_enable)
+        self.assertEqual(vpn_status.openvpn_clients_total, 2)
+        self.assertEqual(vpn_status.pptpvpn_clients_total, 3)
+
+    def test_set_vpn(self) -> None:
+        response_openvpn_read = """
+        {
+            "enabled": "on",
+            "proto": "udp",
+            "access": "home",
+            "cert_exist": true,
+            "mask": "255.255.255.0",
+            "port": "1194",
+            "serverip": "10.8.0.0"
+        }
+        """
+
+        class TPLinkRouterTest(TplinkC1200Router):
+            def request(
+                self,
+                path: str,
+                data: str,
+                ignore_response: bool = False,
+                ignore_errors: bool = False,
+            ) -> dict | None:
+                if path == "/admin/openvpn?form=config&operation=read":
+                    return loads(response_openvpn_read)
+                self.captured_path = path
+
+        client = TPLinkRouterTest("", "")
+        client.set_vpn(VPN.OPEN_VPN, True)
+
+        expected_path = (
+            "/admin/openvpn?form=config&operation=write&enabled=on"
+            "&proto=udp&access=home&cert_exist=True"
+            "&mask=255.255.255.0&port=1194&serverip=10.8.0.0"
+        )
+        self.assertEqual(client.captured_path, expected_path)
+
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

test/test_client_c6u.py

@@ -6,6 +6,7 @@ from tplinkrouterc6u import (
     TplinkRouter,
     Connection,
     Status,
+    IPv4Status,
     Device,
     ClientException,
 )
@@ -694,6 +695,33 @@ class TestTPLinkClient(TestCase):
         self.assertEqual(check_url, 'admin/wireless?&form=guest&form=iot_6g')
         self.assertEqual(check_data, 'operation=write&iot_6g_enable=on')
 
+    def test_get_ipv4_status_empty(self) -> None:
+        response_network = '{"result": {}, "error_code": 0}'
+
+        class TPLinkRouterTest(TplinkRouter):
+            def request(self, path: str, data: str,
+                        ignore_response: bool = False, ignore_errors: bool = False) -> dict | None:
+                if path == 'admin/network?form=status_ipv4&operation=read':
+                    return loads(response_network)['result']
+                raise ClientException()
+
+        client = TPLinkRouterTest('', '')
+        result = client.get_ipv4_status()
+
+        self.assertIsInstance(result, IPv4Status)
+        self.assertEqual(result.wan_macaddr, '00-00-00-00-00-00')
+        self.assertEqual(result.wan_ipv4_ipaddr, '0.0.0.0')
+        self.assertEqual(result.wan_ipv4_gateway, '0.0.0.0')
+        self.assertEqual(result.wan_ipv4_conntype, '')
+        self.assertEqual(result.wan_ipv4_netmask, '0.0.0.0')
+        self.assertEqual(result.wan_ipv4_pridns, '0.0.0.0')
+        self.assertEqual(result.wan_ipv4_snddns, '0.0.0.0')
+        self.assertEqual(result.lan_macaddr, '00-00-00-00-00-00')
+        self.assertEqual(result.lan_ipv4_ipaddr, '0.0.0.0')
+        self.assertEqual(result.lan_ipv4_netmask, '0.0.0.0')
+        self.assertEqual(result.lan_ipv4_dhcp_enable, False)
+        self.assertEqual(result.remote, None)
+
 
 if __name__ == '__main__':
     main()

test/test_client_deco.py

@@ -365,6 +365,32 @@ class TestTPLinkDecoClient(TestCase):
         self.assertEqual(result.lan_ipv4_dhcp_enable, False)
         self.assertEqual(result.remote, None)
 
+    def test_get_ipv4_status_empty(self) -> None:
+        response_network = '{"result": {}, "error_code": 0}'
+
+        class TPLinkRouterTest(TPLinkDecoClient):
+            def request(self, path: str, data: str,
+                        ignore_response: bool = False, ignore_errors: bool = False) -> dict | None:
+                if path == 'admin/network?form=wan_ipv4':
+                    return loads(response_network)['result']
+
+        client = TPLinkRouterTest('', '')
+        result = client.get_ipv4_status()
+
+        self.assertIsInstance(result, IPv4Status)
+        self.assertEqual(result.wan_macaddr, '00-00-00-00-00-00')
+        self.assertEqual(result.wan_ipv4_ipaddr, None)
+        self.assertEqual(result.wan_ipv4_gateway, None)
+        self.assertEqual(result.wan_ipv4_conntype, '')
+        self.assertEqual(result.wan_ipv4_netmask, None)
+        self.assertEqual(result.wan_ipv4_pridns, '0.0.0.0')
+        self.assertEqual(result.wan_ipv4_snddns, '0.0.0.0')
+        self.assertEqual(result.lan_macaddr, '00-00-00-00-00-00')
+        self.assertEqual(result.lan_ipv4_ipaddr, '0.0.0.0')
+        self.assertEqual(result.lan_ipv4_netmask, '0.0.0.0')
+        self.assertEqual(result.lan_ipv4_dhcp_enable, False)
+        self.assertEqual(result.remote, None)
+
     def test_get_ipv4_status_no_internet(self) -> None:
         response_network = '''
 {"result": {

test/test_client_mr.py

@@ -599,6 +599,29 @@ DNSServers=7.7.7.7,2.2.2.2
         self.assertEqual(result.lan_ipv4_dhcp_enable, True)
         self.assertEqual(result.remote, None)
 
+    def test_get_ipv4_status_empty(self) -> None:
+        response = '''
+[1,1,0,0,0,0]0
+[1,1,0,0,0,0]1
+[1,1,1,0,0,0]2
+[2,1,1,0,0,0]2
+[error]0
+
+'''
+
+        class TPLinkMRClientTest(TPLinkMRClient):
+            def _request(self, url, method='POST', data_str=None, encrypt=False):
+                return 200, response
+
+        client = TPLinkMRClientTest('', '')
+        result = client.get_ipv4_status()
+
+        self.assertIsInstance(result, IPv4Status)
+        self.assertEqual(result.lan_macaddr, '00-00-00-00-00-00')
+        self.assertEqual(result.lan_ipv4_ipaddr, '0.0.0.0')
+        self.assertEqual(result.lan_ipv4_netmask, '0.0.0.0')
+        self.assertEqual(result.lan_ipv4_dhcp_enable, False)
+
     def test_get_ipv4_status_one_wlan(self) -> None:
         response = '''
 [1,1,0,0,0,0]0

test/test_client_xdr.py

@@ -579,6 +579,52 @@ maximum-scale=2.0, user-scalable=yes" />
         self.assertIsInstance(ipv4_status.lan_ipv4_netmask_address, IPv4Address)
         self.assertEqual(ipv4_status.lan_ipv4_netmask_address, get_ip('255.255.255.0'))
 
+    def test_get_ipv4_status_empty(self):
+        mock_data = json.loads('{"error_code": 0}')
+        check_payload = {}
+
+        class TPLinkXDRClientTest(TPLinkXDRClient):
+            def _request(self, payload: dict) -> dict:
+                nonlocal check_payload
+                check_payload = payload
+                return mock_data
+
+        client = TPLinkXDRClientTest('', '')
+        ipv4_status = client.get_ipv4_status()
+
+        self.assertEqual(check_payload['method'], 'get')
+        self.assertIsInstance(check_payload['dhcpd'], dict)
+        self.assertEqual(check_payload['dhcpd']['name'], 'udhcpd')
+        self.assertIsInstance(check_payload['network'], dict)
+        self.assertEqual(check_payload['network']['name'], ['lan', 'wan_status'])
+
+        self.assertIsInstance(ipv4_status, IPv4Status)
+        self.assertEqual(ipv4_status.wan_ipv4_ipaddr, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.wan_ipv4_ipaddress, IPv4Address)
+        self.assertEqual(ipv4_status.wan_ipv4_ipaddress, get_ip('0.0.0.0'))
+        self.assertEqual(ipv4_status.wan_ipv4_gateway, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.wan_ipv4_gateway_address, IPv4Address)
+        self.assertEqual(ipv4_status.wan_ipv4_gateway_address, get_ip('0.0.0.0'))
+        self.assertEqual(ipv4_status.wan_ipv4_netmask, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.wan_ipv4_netmask_address, IPv4Address)
+        self.assertEqual(ipv4_status.wan_ipv4_netmask_address, get_ip('0.0.0.0'))
+        self.assertEqual(ipv4_status.wan_ipv4_pridns, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.wan_ipv4_pridns_address, IPv4Address)
+        self.assertEqual(ipv4_status.wan_ipv4_pridns_address, get_ip('0.0.0.0'))
+        self.assertEqual(ipv4_status.wan_ipv4_snddns, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.wan_ipv4_snddns_address, IPv4Address)
+        self.assertEqual(ipv4_status.wan_ipv4_snddns_address, get_ip('0.0.0.0'))
+        self.assertEqual(ipv4_status.lan_macaddr, '00-00-00-00-00-00')
+        self.assertIsInstance(ipv4_status.lan_macaddress, EUI48)
+        self.assertEqual(ipv4_status.lan_macaddress, get_mac('00-00-00-00-00-00'))
+        self.assertEqual(ipv4_status.lan_ipv4_ipaddr, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.lan_ipv4_ipaddress, IPv4Address)
+        self.assertEqual(ipv4_status.lan_ipv4_ipaddress, get_ip('0.0.0.0'))
+        self.assertEqual(ipv4_status.lan_ipv4_dhcp_enable, False)
+        self.assertEqual(ipv4_status.lan_ipv4_netmask, '0.0.0.0')
+        self.assertIsInstance(ipv4_status.lan_ipv4_netmask_address, IPv4Address)
+        self.assertEqual(ipv4_status.lan_ipv4_netmask_address, get_ip('0.0.0.0'))
+
 
 if __name__ == '__main__':
     main()

tplinkrouterc6u/client/c1200.py

@@ -1,8 +1,11 @@
 from re import search
 from requests import post, Response
+from urllib.parse import urlencode
 from tplinkrouterc6u.common.encryption import EncryptionWrapper
 from tplinkrouterc6u.common.exception import ClientException, AuthorizeError
 from tplinkrouterc6u.client.c5400x import TplinkC5400XRouter
+from tplinkrouterc6u.common.dataclass import VPNStatus
+from tplinkrouterc6u.common.package_enum import VPN
 
 
 class TplinkC1200Router(TplinkC5400XRouter):
@@ -100,3 +103,36 @@ class TplinkC1200Router(TplinkC5400XRouter):
     @staticmethod
     def _get_login_data(crypted_pwd: str) -> str:
         return 'operation=login&password={}'.format(crypted_pwd)
+
+    def get_vpn_status(self) -> VPNStatus:
+        status = VPNStatus()
+
+        values = [
+            self.request("/admin/openvpn?form=config&operation=read", "operation=read"),
+            self.request("/admin/pptpd?form=config&operation=read", "operation=read"),
+            self.request("/admin/vpnconn?form=config&operation=list&vpntype=openvpn",
+                         "operation=list&operation=list&vpntype=openvpn"),
+            self.request("/admin/vpnconn?form=config&operation=list&vpntype=pptp",
+                         "operation=list&operation=list&vpntype=pptp"),
+        ]
+
+        status.openvpn_enable = values[0]['enabled'] == 'on'
+        status.pptpvpn_enable = values[1]['enabled'] == 'on'
+
+        if isinstance(values[2], list):
+            status.openvpn_clients_total = len(values[2])
+            status.pptpvpn_clients_total = len(values[3])
+        else:
+            status.openvpn_clients_total = 0
+            status.pptpvpn_clients_total = 0
+
+        return status
+
+    def set_vpn(self, vpn: VPN, enable: bool) -> None:
+        path = "/admin/{}?form=config&operation=read".format(vpn.lowercase)
+        current_config = self.request(path, "operation=read")
+        current_config['enabled'] = "on" if enable else "off"
+        data = urlencode(current_config)
+        data = "&operation=write&{}".format(data)
+        path = "/admin/{}?form=config{}".format(vpn.lowercase, data)
+        self.request(path, data)

tplinkrouterc6u/client/c6u.py

@@ -363,18 +363,18 @@ class TplinkBaseRouter(AbstractRouter, TplinkRequest):
     def get_ipv4_status(self) -> IPv4Status:
         ipv4_status = IPv4Status()
         data = self.request('admin/network?form=status_ipv4&operation=read', 'operation=read')
-        ipv4_status._wan_macaddr = EUI48(data['wan_macaddr'])
-        ipv4_status._wan_ipv4_ipaddr = IPv4Address(data['wan_ipv4_ipaddr'])
-        ipv4_status._wan_ipv4_gateway = IPv4Address(data['wan_ipv4_gateway'])
-        ipv4_status.wan_ipv4_conntype = data['wan_ipv4_conntype']
-        ipv4_status._wan_ipv4_netmask = IPv4Address(data['wan_ipv4_netmask'])
-        ipv4_status._wan_ipv4_pridns = IPv4Address(data['wan_ipv4_pridns'])
-        ipv4_status._wan_ipv4_snddns = IPv4Address(data['wan_ipv4_snddns'])
-        ipv4_status._lan_macaddr = EUI48(data['lan_macaddr'])
-        ipv4_status._lan_ipv4_ipaddr = IPv4Address(data['lan_ipv4_ipaddr'])
-        ipv4_status.lan_ipv4_dhcp_enable = self._str2bool(data['lan_ipv4_dhcp_enable'])
-        ipv4_status._lan_ipv4_netmask = IPv4Address(data['lan_ipv4_netmask'])
-        ipv4_status.remote = self._str2bool(data.get('remote'))
+        ipv4_status._wan_macaddr = get_mac(data.get('wan_macaddr', '00:00:00:00:00:00'))
+        ipv4_status._wan_ipv4_ipaddr = get_ip(data.get('wan_ipv4_ipaddr', '0.0.0.0'))
+        ipv4_status._wan_ipv4_gateway = get_ip(data.get('wan_ipv4_gateway', '0.0.0.0'))
+        ipv4_status.wan_ipv4_conntype = data.get('wan_ipv4_conntype', '')
+        ipv4_status._wan_ipv4_netmask = get_ip(data.get('wan_ipv4_netmask', '0.0.0.0'))
+        ipv4_status._wan_ipv4_pridns = get_ip(data.get('wan_ipv4_pridns', '0.0.0.0'))
+        ipv4_status._wan_ipv4_snddns = get_ip(data.get('wan_ipv4_snddns', '0.0.0.0'))
+        ipv4_status._lan_macaddr = get_mac(data.get('lan_macaddr', '00:00:00:00:00:00'))
+        ipv4_status._lan_ipv4_ipaddr = get_ip(data.get('lan_ipv4_ipaddr', '0.0.0.0'))
+        ipv4_status.lan_ipv4_dhcp_enable = self._str2bool(data.get('lan_ipv4_dhcp_enable', ''))
+        ipv4_status._lan_ipv4_netmask = get_ip(data.get('lan_ipv4_netmask', '0.0.0.0'))
+        ipv4_status.remote = self._str2bool(data.get('remote', '')) if data.get('remote') else None
 
         return ipv4_status
 

tplinkrouterc6u/client/deco.py

@@ -3,7 +3,7 @@ from json import dumps
 from macaddress import EUI48
 from ipaddress import IPv4Address
 from logging import Logger
-from tplinkrouterc6u.common.helper import get_ip, get_mac
+from tplinkrouterc6u.common.helper import get_ip, get_mac, get_value
 from tplinkrouterc6u.common.package_enum import Connection
 from tplinkrouterc6u.common.dataclass import Firmware, Status, Device, IPv4Status
 from tplinkrouterc6u.client_abstract import AbstractRouter
@@ -67,14 +67,14 @@ class TPLinkDecoClient(TplinkEncryption, AbstractRouter):
         data = self.request('admin/network?form=wan_ipv4', dumps({'operation': 'read'}))
 
         status = Status()
-        element = self._get_value(data, ['wan', 'ip_info', 'mac'])
+        element = get_value(data, ['wan', 'ip_info', 'mac'])
         status._wan_macaddr = EUI48(element) if element else None
-        status._lan_macaddr = EUI48(self._get_value(data, ['lan', 'ip_info', 'mac']))
-        element = self._get_value(data, ['wan', 'ip_info', 'ip'])
+        status._lan_macaddr = EUI48(get_value(data, ['lan', 'ip_info', 'mac']))
+        element = get_value(data, ['wan', 'ip_info', 'ip'])
         status._wan_ipv4_addr = IPv4Address(element) if element else None
-        element = self._get_value(data, ['lan', 'ip_info', 'ip'])
+        element = get_value(data, ['lan', 'ip_info', 'ip'])
         status._lan_ipv4_addr = IPv4Address(element) if element else None
-        element = self._get_value(data, ['wan', 'ip_info', 'gateway'])
+        element = get_value(data, ['wan', 'ip_info', 'gateway'])
         status._wan_ipv4_gateway = IPv4Address(element) if element else None
 
         data = self.request('admin/network?form=performance', dumps({"operation": "read"}))
@@ -82,12 +82,12 @@ class TPLinkDecoClient(TplinkEncryption, AbstractRouter):
         status.cpu_usage = data.get('cpu_usage')
 
         data = self.request('admin/wireless?form=wlan', dumps({'operation': 'read'}))
-        status.wifi_2g_enable = self._get_value(data, ['band2_4', 'host', 'enable'])
-        status.guest_2g_enable = self._get_value(data, ['band2_4', 'guest', 'enable'])
-        status.wifi_5g_enable = self._get_value(data, ['band5_1', 'host', 'enable'])
-        status.guest_5g_enable = self._get_value(data, ['band5_1', 'guest', 'enable'])
-        status.wifi_6g_enable = self._get_value(data, ['band6', 'host', 'enable'])
-        status.guest_6g_enable = self._get_value(data, ['band6', 'guest', 'enable'])
+        status.wifi_2g_enable = get_value(data, ['band2_4', 'host', 'enable'])
+        status.guest_2g_enable = get_value(data, ['band2_4', 'guest', 'enable'])
+        status.wifi_5g_enable = get_value(data, ['band5_1', 'host', 'enable'])
+        status.guest_5g_enable = get_value(data, ['band5_1', 'guest', 'enable'])
+        status.wifi_6g_enable = get_value(data, ['band6', 'host', 'enable'])
+        status.guest_6g_enable = get_value(data, ['band6', 'guest', 'enable'])
 
         devices = []
         data = self.request('admin/client?form=client_list', dumps(
@@ -125,34 +125,30 @@ class TPLinkDecoClient(TplinkEncryption, AbstractRouter):
     def get_ipv4_status(self) -> IPv4Status:
         ipv4_status = IPv4Status()
         data = self.request('admin/network?form=wan_ipv4', dumps({'operation': 'read'}))
-        ipv4_status._wan_macaddr = EUI48(self._get_value(data, ['wan', 'ip_info', 'mac']))
-        element = self._get_value(data, ['wan', 'ip_info', 'ip'])
+        element = get_value(data, ['wan', 'ip_info', 'mac'])
+        ipv4_status._wan_macaddr = get_mac(element if element else '00:00:00:00:00:00')
+        element = get_value(data, ['wan', 'ip_info', 'ip'])
         ipv4_status._wan_ipv4_ipaddr = IPv4Address(element) if element else None
-        element = self._get_value(data, ['wan', 'ip_info', 'gateway'])
+        element = get_value(data, ['wan', 'ip_info', 'gateway'])
         ipv4_status._wan_ipv4_gateway = IPv4Address(element) if element else None
-        ipv4_status.wan_ipv4_conntype = self._get_value(data, ['wan', 'dial_type'])
-        element = self._get_value(data, ['wan', 'ip_info', 'mask'])
+        element = get_value(data, ['wan', 'dial_type'])
+        ipv4_status.wan_ipv4_conntype = element if element else ''
+        element = get_value(data, ['wan', 'ip_info', 'mask'])
         ipv4_status._wan_ipv4_netmask = IPv4Address(element) if element else None
-        ipv4_status._wan_ipv4_pridns = IPv4Address(self._get_value(data, ['wan', 'ip_info', 'dns1']))
-        ipv4_status._wan_ipv4_snddns = IPv4Address(self._get_value(data, ['wan', 'ip_info', 'dns2']))
-        ipv4_status._lan_macaddr = EUI48(self._get_value(data, ['lan', 'ip_info', 'mac']))
-        ipv4_status._lan_ipv4_ipaddr = IPv4Address(self._get_value(data, ['lan', 'ip_info', 'ip']))
+        element = get_value(data, ['wan', 'ip_info', 'dns1'])
+        ipv4_status._wan_ipv4_pridns = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['wan', 'ip_info', 'dns2'])
+        ipv4_status._wan_ipv4_snddns = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['lan', 'ip_info', 'mac'])
+        ipv4_status._lan_macaddr = get_mac(element if element else '00:00:00:00:00:00')
+        element = get_value(data, ['lan', 'ip_info', 'ip'])
+        ipv4_status._lan_ipv4_ipaddr = get_ip(element if element else '0.0.0.0')
         ipv4_status.lan_ipv4_dhcp_enable = False
-        ipv4_status._lan_ipv4_netmask = IPv4Address(self._get_value(data, ['lan', 'ip_info', 'mask']))
+        element = get_value(data, ['lan', 'ip_info', 'mask'])
+        ipv4_status._lan_ipv4_netmask = get_ip(element if element else '0.0.0.0')
 
         return ipv4_status
 
-    @staticmethod
-    def _get_value(dictionary: dict, keys: list):
-        nested_dict = dictionary
-
-        for key in keys:
-            try:
-                nested_dict = nested_dict[key]
-            except Exception:
-                return None
-        return nested_dict
-
     def _map_wire_type(self, data: dict) -> Connection:
         if data.get('wire_type') == 'wired':
             return Connection.WIRED
@@ -160,7 +156,7 @@ class TPLinkDecoClient(TplinkEncryption, AbstractRouter):
                    'band5': {'main': Connection.HOST_5G, 'guest': Connection.GUEST_5G, 'iot': Connection.IOT_5G},
                    'band6': {'main': Connection.HOST_6G, 'guest': Connection.GUEST_6G, 'iot': Connection.IOT_6G}
                    }
-        result = self._get_value(mapping, [data.get('connection_type'), data.get('interface')])
+        result = get_value(mapping, [data.get('connection_type'), data.get('interface')])
 
         return result if result else Connection.UNKNOWN
 

tplinkrouterc6u/client/mr.py

@@ -7,6 +7,7 @@ from datetime import timedelta, datetime
 from macaddress import EUI48
 from ipaddress import IPv4Address
 from logging import Logger
+from tplinkrouterc6u.common.helper import get_ip, get_mac
 from tplinkrouterc6u.common.encryption import EncryptionWrapperMR
 from tplinkrouterc6u.common.package_enum import Connection, VPN
 from tplinkrouterc6u.common.dataclass import (
@@ -542,22 +543,22 @@ class TPLinkMRClient(TPLinkMRClientBase):
         _, values = self.req_act(acts)
 
         ipv4_status = IPv4Status()
-        ipv4_status._lan_macaddr = EUI48(values['0']['X_TP_MACAddress'])
-        ipv4_status._lan_ipv4_ipaddr = IPv4Address(values['0']['IPInterfaceIPAddress'])
-        ipv4_status._lan_ipv4_netmask = IPv4Address(values['0']['IPInterfaceSubnetMask'])
-        ipv4_status.lan_ipv4_dhcp_enable = bool(int(values['1']['DHCPServerEnable']))
+        ipv4_status._lan_macaddr = get_mac(values.get('0', {}).get('X_TP_MACAddress', '00:00:00:00:00:00'))
+        ipv4_status._lan_ipv4_ipaddr = get_ip(values.get('0', {}).get('IPInterfaceIPAddress', '0.0.0.0'))
+        ipv4_status._lan_ipv4_netmask = get_ip(values.get('0', {}).get('IPInterfaceSubnetMask', '0.0.0.0'))
+        ipv4_status.lan_ipv4_dhcp_enable = bool(int(values.get('1', {}).get('DHCPServerEnable', '0')))
 
         for item in self._to_list(values.get('2')):
-            if int(item['enable']) == 0 and values.get('2').__class__ == list:
+            if int(item.get('enable', '0')) == 0 and values.get('2').__class__ == list:
                 continue
-            ipv4_status._wan_macaddr = EUI48(item['MACAddress'])
-            ipv4_status._wan_ipv4_ipaddr = IPv4Address(item['externalIPAddress'])
-            ipv4_status._wan_ipv4_gateway = IPv4Address(item['defaultGateway'])
-            ipv4_status.wan_ipv4_conntype = item['name']
-            ipv4_status._wan_ipv4_netmask = IPv4Address(item['subnetMask'])
-            dns = item['DNSServers'].split(',')
-            ipv4_status._wan_ipv4_pridns = IPv4Address(dns[0])
-            ipv4_status._wan_ipv4_snddns = IPv4Address(dns[1])
+            ipv4_status._wan_macaddr = get_mac(item.get('MACAddress', '00:00:00:00:00:00'))
+            ipv4_status._wan_ipv4_ipaddr = get_ip(item.get('externalIPAddress', '0.0.0.0'))
+            ipv4_status._wan_ipv4_gateway = get_ip(item.get('defaultGateway', '0.0.0.0'))
+            ipv4_status.wan_ipv4_conntype = item.get('name', '')
+            ipv4_status._wan_ipv4_netmask = get_ip(item.get('subnetMask', '0.0.0.0'))
+            dns = item.get('DNSServers', '').split(',')
+            ipv4_status._wan_ipv4_pridns = get_ip(dns[0] if len(dns) == 2 else '0.0.0.0')
+            ipv4_status._wan_ipv4_snddns = get_ip(dns[1] if len(dns) == 2 else '0.0.0.0')
 
         return ipv4_status
 

tplinkrouterc6u/client/xdr.py

@@ -11,7 +11,7 @@ from tplinkrouterc6u.common.dataclass import (Device, Firmware, IPv4DHCPLease,
                                               IPv4Reservation, IPv4Status,
                                               Status)
 from tplinkrouterc6u.common.exception import ClientException
-from tplinkrouterc6u.common.helper import get_ip, get_mac
+from tplinkrouterc6u.common.helper import get_ip, get_mac, get_value
 from tplinkrouterc6u.common.package_enum import Connection
 
 
@@ -170,15 +170,23 @@ class TPLinkXDRClient(AbstractRouter):
         })
 
         ipv4_status = IPv4Status()
-        ipv4_status._wan_ipv4_ipaddr = get_ip(data['network']['wan_status']['ipaddr'])
-        ipv4_status._wan_ipv4_gateway = get_ip(data['network']['wan_status']['gateway'])
-        ipv4_status._wan_ipv4_netmask = get_ip(data['network']['wan_status']['netmask'])
-        ipv4_status._wan_ipv4_pridns = get_ip(data['network']['wan_status']['pri_dns'])
-        ipv4_status._wan_ipv4_snddns = get_ip(data['network']['wan_status']['snd_dns'])
-        ipv4_status._lan_macaddr = get_mac(data['network']['lan']['macaddr'])
-        ipv4_status._lan_ipv4_ipaddr = get_ip(data['network']['lan']['ipaddr'])
-        ipv4_status.lan_ipv4_dhcp_enable = data['dhcpd']['udhcpd']['enable'] == '1'
-        ipv4_status._lan_ipv4_netmask = get_ip(data['network']['lan']['netmask'])
+        element = get_value(data, ['network', 'wan_status', 'ipaddr'])
+        ipv4_status._wan_ipv4_ipaddr = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['network', 'wan_status', 'gateway'])
+        ipv4_status._wan_ipv4_gateway = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['network', 'wan_status', 'netmask'])
+        ipv4_status._wan_ipv4_netmask = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['network', 'wan_status', 'pri_dns'])
+        ipv4_status._wan_ipv4_pridns = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['network', 'wan_status', 'snd_dns'])
+        ipv4_status._wan_ipv4_snddns = get_ip(element if element else '0.0.0.0')
+        element = get_value(data, ['network', 'lan', 'macaddr'])
+        ipv4_status._lan_macaddr = get_mac(element if element else '00:00:00:00:00:00')
+        element = get_value(data, ['network', 'lan', 'ipaddr'])
+        ipv4_status._lan_ipv4_ipaddr = get_ip(element if element else '0.0.0.0')
+        ipv4_status.lan_ipv4_dhcp_enable = get_value(data, ['dhcpd', 'udhcpd', 'enable']) == '1'
+        element = get_value(data, ['network', 'lan', 'netmask'])
+        ipv4_status._lan_ipv4_netmask = get_ip(element if element else '0.0.0.0')
         return ipv4_status
 
     def reboot(self) -> None:

tplinkrouterc6u/common/helper.py

@@ -14,3 +14,14 @@ def get_mac(mac: str) -> EUI48:
         return EUI48(mac)
     except Exception:
         return EUI48('00:00:00:00:00:00')
+
+
+def get_value(dictionary: dict, keys: list):
+    nested_dict = dictionary
+
+    for key in keys:
+        try:
+            nested_dict = nested_dict[key]
+        except Exception:
+            return None
+    return nested_dict

tplinkrouterc6u/common/package_enum.py

@@ -49,3 +49,8 @@ class Connection(Enum):
 class VPN(Enum):
     OPEN_VPN = 'OPENVPN'
     PPTP_VPN = 'PPTPVPN'
+
+    @property
+    def lowercase(self) -> str:
+        """Returns the lowercase version of the enum value. Needed for the c1200 router."""
+        return self.value.lower()

{tplinkrouterc6u-5.3.0.dist-info → tplinkrouterc6u-5.4.1.dist-info}/METADATA

@@ -1,6 +1,6 @@
-Metadata-Version: 2.1
+Metadata-Version: 2.2
 Name: tplinkrouterc6u
-Version: 5.3.0
+Version: 5.4.1
 Summary: TP-Link Router API
 Home-page: https://github.com/AlexandrErohin/TP-Link-Archer-C6U
 Author: Alex Erohin
@@ -19,6 +19,15 @@ License-File: LICENSE
 Requires-Dist: requests
 Requires-Dist: pycryptodome
 Requires-Dist: macaddress
+Dynamic: author
+Dynamic: author-email
+Dynamic: classifier
+Dynamic: description
+Dynamic: description-content-type
+Dynamic: home-page
+Dynamic: requires-dist
+Dynamic: requires-python
+Dynamic: summary
 
 # TP-Link Router API
 Python package for API access and management for TP-Link Routers. See [Supported routers](#supports)
@@ -280,7 +289,7 @@ or you have TP-link C5400X or similar router you need to get web encrypted passw
 - Archer AX20 v1.0
 - Archer AX20 v3.0
 - Archer AX21 (v1.20, v3.0)
-- Archer AX23 v1.0
+- Archer AX23 (v1.0, v1.2)
 - Archer AX50 v1.0
 - Archer AX53 v2
 - Archer AX55 (v1.0, V1.60, v4.0)
@@ -290,6 +299,7 @@ or you have TP-link C5400X or similar router you need to get web encrypted passw
 - Archer AX90 V1.20
 - Archer AXE75 V1
 - Archer AXE16000
+- Archer AX1800
 - Archer AX3000 V1
 - Archer AX6000 V1
 - Archer AX11000 V1
@@ -303,7 +313,7 @@ or you have TP-link C5400X or similar router you need to get web encrypted passw
 - Archer C7 (v4.0, v5.0)
 - Archer C5400X V1
 - Archer GX90 v1.0
-- Archer MR200 (v5, v5.3)
+- Archer MR200 (v5, v5.3, v6.0)
 - Archer MR550 v1
 - Archer MR600 (v1, v2, v3)
 - Archer VR600 v3
@@ -321,13 +331,15 @@ or you have TP-link C5400X or similar router you need to get web encrypted passw
 - Deco X90
 - Deco XE75 (v1.0, v2.0)
 - EX511 v2.0
+- HX510 v1.0
+- NX510v v1.0
 - TD-W9960 (v1, V1.20)
 - TL-MR100 v2.0
 - TL-MR105
 - TL-MR6400 (v5, v5.3)
 - TL-MR6500v
-- TL-XDR3010 V2
 - TL-WA3001 v1.0
+- TL-XDR3010 V2
 
 ### Not fully tested Hardware Versions
 - AD7200 V2

tplinkrouterc6u-5.4.1.dist-info/RECORD

@@ -0,0 +1,30 @@
+test/__init__.py,sha256=McQmUjeN3AwmwdS6QNfwGXXE77OKoPK852I2BM9XsrU,210
+test/test_client_c1200.py,sha256=4RdwMEwTGWLOxOVTuPikifXDcUJFQ13DuyWGm2Aevrk,8811
+test/test_client_c6u.py,sha256=rJKJWwUBcmMehvdyyRtWm420X6KIXdrJu75VH6JPvng,32066
+test/test_client_deco.py,sha256=YPLKRD8GoyDYHfRgdXvCk8iVNw8zdMJW-AHVnNbpdTM,31719
+test/test_client_ex.py,sha256=YGY3auCiZTM91640LHmsL6r2-xcK5n5cB_CpvD83GeI,20429
+test/test_client_mr.py,sha256=2ZFNwJGHqFbnePRvmmg5r_4YzqsHo3bjkmBXVzht7YQ,33407
+test/test_client_xdr.py,sha256=mgn-xL5mD5sHD8DjTz9vpY7jeh4Ob6Um6Y8v5Qgx2jA,23374
+tplinkrouterc6u/__init__.py,sha256=bLlCkiL9ycyRVG7VqPOJWPcoPmUfMkdTcUKFYKNP8QI,900
+tplinkrouterc6u/client_abstract.py,sha256=OgftTH6bELzhFWom0MOX4EJe3RNS003ezpHyyRnh2tQ,1328
+tplinkrouterc6u/provider.py,sha256=SsyGu_2SZ-a46ADl9aw_0wx0lgbsJhS6wnwUzb_1qGg,1900
+tplinkrouterc6u/client/__init__.py,sha256=KBy3fmtA9wgyFrb0Urh2x4CkKtWVnESdp-vxmuOvq0k,27
+tplinkrouterc6u/client/c1200.py,sha256=_nY_pJ-wPWODAaes9kHPdVcM6YM54f1E54CfdoFHqbE,4771
+tplinkrouterc6u/client/c5400x.py,sha256=9E0omBSbWY_ljrs5MTCMu5brmrLtzsDB5O62Db8lP8Q,4329
+tplinkrouterc6u/client/c6u.py,sha256=sDlwtccncuVrBRAzbLxgT5hU7VYNM0LCVtyEs-9bk-Q,17587
+tplinkrouterc6u/client/c6v4.py,sha256=-IF7SqTZx56lRAVmiyxK9VKkrmD7srQSJWFvn2Z0DII,1489
+tplinkrouterc6u/client/deco.py,sha256=yL1fmDo7j67_iD4qi9gl402C0IGauAtgrA0EGAOR1jg,8228
+tplinkrouterc6u/client/ex.py,sha256=PxMKq7Yj-2iJBtSKzgxaJ1D0SrblFwhPWJYyrac0c9Q,12706
+tplinkrouterc6u/client/mr.py,sha256=rS9aqAxrzIh0Pl8ZqGQQ9uWA3TzEHijkvY-WESRbVHs,25863
+tplinkrouterc6u/client/xdr.py,sha256=9YuVfrmsrDeqnhJXp1Fc4OfcJEz9SkjdmpOoTIDi6Js,10327
+tplinkrouterc6u/common/__init__.py,sha256=pCTvVZ9CAwgb7MxRnLx0y1rI0sTKSwT24FfxWfQXeTM,33
+tplinkrouterc6u/common/dataclass.py,sha256=__u8I8URLk_AdIEN4Jd8Pswh4ujURlJxw8YunuVStwk,7630
+tplinkrouterc6u/common/encryption.py,sha256=4HelTxzN6esMfDZRBt3m8bwB9Nj_biKijnCnrGWPWKg,6228
+tplinkrouterc6u/common/exception.py,sha256=_0G8ZvW5__CsGifHrsZeULdl8c6EUD071sDCQsQgrHY,140
+tplinkrouterc6u/common/helper.py,sha256=x9Y0zkCnELpzNzuQtq2yMrWmp7nCyJylTBKu4a8RfKc,561
+tplinkrouterc6u/common/package_enum.py,sha256=4ykL_2Pw0nDEIH_qR9UJlFF6stTgSfhPz32r8KT-sh8,1624
+tplinkrouterc6u-5.4.1.dist-info/LICENSE,sha256=YF6QR6Vjxcg5b_sYIyqkME7FZYau5TfEUGTG-0JeRK0,35129
+tplinkrouterc6u-5.4.1.dist-info/METADATA,sha256=Z1zydhvJZQU6Ffx_8vpUQgyNjUw4tABTmeTLx1xaabs,15189
+tplinkrouterc6u-5.4.1.dist-info/WHEEL,sha256=nn6H5-ilmfVryoAQl3ZQ2l8SH5imPWFpm1A5FgEuFV4,91
+tplinkrouterc6u-5.4.1.dist-info/top_level.txt,sha256=1iSCCIueqgEkrTxtQ-jiHe99jAB10zqrVdBcwvNfe_M,21
+tplinkrouterc6u-5.4.1.dist-info/RECORD,,

{tplinkrouterc6u-5.3.0.dist-info → tplinkrouterc6u-5.4.1.dist-info}/WHEEL

@@ -1,5 +1,5 @@
 Wheel-Version: 1.0
-Generator: setuptools (75.5.0)
+Generator: setuptools (75.8.1)
 Root-Is-Purelib: true
 Tag: py3-none-any
 

tplinkrouterc6u-5.3.0.dist-info/RECORD

@@ -1,30 +0,0 @@
-test/__init__.py,sha256=McQmUjeN3AwmwdS6QNfwGXXE77OKoPK852I2BM9XsrU,210
-test/test_client_c1200.py,sha256=O6NK9uXIEb_vks6lI3g7j6q8TYJ9MSDFYzGA_wOBhOA,4620
-test/test_client_c6u.py,sha256=qC0PNE-Hz3d8PYIGej4j_M4cLDqffnPiXu_ff7Ft29M,30709
-test/test_client_deco.py,sha256=ur4u-pWB-6WaYW6PSpK9OvCg3rfo2x06V5Cf_eE2UYU,30447
-test/test_client_ex.py,sha256=YGY3auCiZTM91640LHmsL6r2-xcK5n5cB_CpvD83GeI,20429
-test/test_client_mr.py,sha256=Uomg3T_SA5Y1tb4wlniMKQDi_uJ2Vqm30I-GKgOXBRc,32703
-test/test_client_xdr.py,sha256=Tm3fXAmSxa8F_YNv66eN3zSvy2GKi_q6tuuw8GWqL-c,20698
-tplinkrouterc6u/__init__.py,sha256=bLlCkiL9ycyRVG7VqPOJWPcoPmUfMkdTcUKFYKNP8QI,900
-tplinkrouterc6u/client_abstract.py,sha256=OgftTH6bELzhFWom0MOX4EJe3RNS003ezpHyyRnh2tQ,1328
-tplinkrouterc6u/provider.py,sha256=SsyGu_2SZ-a46ADl9aw_0wx0lgbsJhS6wnwUzb_1qGg,1900
-tplinkrouterc6u/client/__init__.py,sha256=KBy3fmtA9wgyFrb0Urh2x4CkKtWVnESdp-vxmuOvq0k,27
-tplinkrouterc6u/client/c1200.py,sha256=4XEYidEGmVIJk0YQLvmTnd0Gqa7glH2gUWvjreHpWrk,3178
-tplinkrouterc6u/client/c5400x.py,sha256=9E0omBSbWY_ljrs5MTCMu5brmrLtzsDB5O62Db8lP8Q,4329
-tplinkrouterc6u/client/c6u.py,sha256=8n3nMW20k3SEXamCYzq7-mzBM6wyn5Txl6XxzjHEa6c,17411
-tplinkrouterc6u/client/c6v4.py,sha256=-IF7SqTZx56lRAVmiyxK9VKkrmD7srQSJWFvn2Z0DII,1489
-tplinkrouterc6u/client/deco.py,sha256=0Hwy_kVQshYd-5Oa3mIASaZI_4NUD09NFEdRyPtzjdI,8265
-tplinkrouterc6u/client/ex.py,sha256=PxMKq7Yj-2iJBtSKzgxaJ1D0SrblFwhPWJYyrac0c9Q,12706
-tplinkrouterc6u/client/mr.py,sha256=eQuHi37pIVaKXWb_S34HJ416xxpGvZNWxxaJTv8Bz4I,25581
-tplinkrouterc6u/client/xdr.py,sha256=lqsBGxi9wZsz1IqQ9KZjAY6gd9-IgK0Cm2oRaswYFSs,9773
-tplinkrouterc6u/common/__init__.py,sha256=pCTvVZ9CAwgb7MxRnLx0y1rI0sTKSwT24FfxWfQXeTM,33
-tplinkrouterc6u/common/dataclass.py,sha256=__u8I8URLk_AdIEN4Jd8Pswh4ujURlJxw8YunuVStwk,7630
-tplinkrouterc6u/common/encryption.py,sha256=4HelTxzN6esMfDZRBt3m8bwB9Nj_biKijnCnrGWPWKg,6228
-tplinkrouterc6u/common/exception.py,sha256=_0G8ZvW5__CsGifHrsZeULdl8c6EUD071sDCQsQgrHY,140
-tplinkrouterc6u/common/helper.py,sha256=phcPUdpY7lJVWF8Ih4KHNdsdem2ed6qFSDXuEAtAgug,334
-tplinkrouterc6u/common/package_enum.py,sha256=py31wF7SntZ0D_o0PS7az29wtsWdp0r0uE7QMmiWigY,1451
-tplinkrouterc6u-5.3.0.dist-info/LICENSE,sha256=YF6QR6Vjxcg5b_sYIyqkME7FZYau5TfEUGTG-0JeRK0,35129
-tplinkrouterc6u-5.3.0.dist-info/METADATA,sha256=KT2VlcenWtGibT_nhekDi8QW7yDPN9j0pZ5DOm32Q2w,14935
-tplinkrouterc6u-5.3.0.dist-info/WHEEL,sha256=R06PA3UVYHThwHvxuRWMqaGcr-PuniXahwjmQRFMEkY,91
-tplinkrouterc6u-5.3.0.dist-info/top_level.txt,sha256=1iSCCIueqgEkrTxtQ-jiHe99jAB10zqrVdBcwvNfe_M,21
-tplinkrouterc6u-5.3.0.dist-info/RECORD,,