topologicpy 0.7.92__py3-none-any.whl → 0.7.94__py3-none-any.whl

topologicpy/Face.py

@@ -1124,6 +1124,123 @@ class Face():
         dirA = Face.Normal(face, outputType="xyz", mantissa=mantissa)
         return Vector.CompassAngle(vectorA=dirA, vectorB=north, mantissa=mantissa, tolerance=tolerance)
 
+    @staticmethod
+    def CShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            c=0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates a C-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the C-shape. The default is None which results in the C-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the C-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the C-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the vertical arm of the C-shape. The default is 0.25.
+        b : float , optional
+            The vertical thickness of the bottom horizontal arm of the C-shape. The default is 0.25.
+        c : float , optional
+            The vertical thickness of the top horizontal arm of the C-shape. The default is 0.25.
+        direction : list , optional
+            The vector representing the up direction of the C-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the C-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Face
+            The created C-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Face.CShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Face.CShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Face.CShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Face.CShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Face.CShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Face.CShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Face.CShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Face.CShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Face.CShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b+c >= (length - tolerance):
+            if not silent:
+                print("Face.CShape - Error: The b and c input parameters must add to less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Face.CShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Face.CShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Face.CShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        c_shape_wire = Wire.CShape(origin=origin,
+                                   width=width,
+                                   length=length,
+                                   a=a,
+                                   b=b,
+                                   c=c,
+                                   flipHorizontal=flipHorizontal,
+                                   flipVertical=flipVertical,
+                                   direction=direction,
+                                   placement=placement,
+                                   tolerance=tolerance,
+                                   silent=silent)
+        return Face.ByWire(c_shape_wire, tolerance=tolerance, silent=silent)
+
     @staticmethod
     def Edges(face) -> list:
         """
@@ -1685,6 +1802,123 @@ class Face():
         plane_b = normalize_plane_coefficients(plane_b)
         return are_planes_coplanar(plane_a, plane_b, tolerance=tolerance)
 
+    @staticmethod
+    def IShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            c=0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates an I-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the I-shape. The default is None which results in the I-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the I-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the I-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the central vertical arm of the I-shape. The default is 0.25.
+        b : float , optional
+            The vertical thickness of the bottom horizontal arm of the I-shape. The default is 0.25.
+        c : float , optional
+            The vertical thickness of the top horizontal arm of the I-shape. The default is 0.25.
+        direction : list , optional
+            The vector representing the up direction of the I-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the I-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Face
+            The created I-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Face.IShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Face.IShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Face.IShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Face.IShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Face.IShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Face.IShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Face.IShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Face.IShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Face.IShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b+c >= (length - tolerance):
+            if not silent:
+                print("Face.IShape - Error: The b and c input parameters must add to less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Face.IShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Face.IShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Face.IShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        i_shape_wire = Wire.IShape(origin=origin,
+                                   width=width,
+                                   length=length,
+                                   a=a,
+                                   b=b,
+                                   c=c,
+                                   flipHorizontal=flipHorizontal,
+                                   flipVertical=flipVertical,
+                                   direction=direction,
+                                   placement=placement,
+                                   tolerance=tolerance,
+                                   silent=silent)
+        return Face.ByWire(i_shape_wire, tolerance=tolerance, silent=silent)
+
     @staticmethod
     def Isovist(face, vertex, obstacles: list = [], direction: list = [0,1,0], fov: float = 360, transferDictionaries: bool = False, metrics: bool = False, triangles: bool = False, mantissa: int = 6, tolerance: float = 0.0001):
         """
@@ -2294,6 +2528,120 @@ class Face():
                 return_face = Topology.AddContent(return_face, triangle_list)
         return return_face
 
+
+    @staticmethod
+    def LShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates an L-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the L-shape. The default is None which results in the L-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the L-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the L-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the vertical arm of the L-shape. The default is 0.25.
+        b : float , optional
+            The vertical thickness of the horizontal arm of the L-shape. The default is 0.25.
+        direction : list , optional
+            The vector representing the up direction of the L-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the L-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Face
+            The created L-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Face.LShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Face.LShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Face.LShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Face.LShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Face.LShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Face.LShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Face.LShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Face.LShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Face.LShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b >= (length - tolerance):
+            if not silent:
+                print("Face.LShape - Error: The b input parameter must be less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Face.LShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Face.LShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Face.LShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        l_shape_wire = Wire.LShape(origin=origin,
+                                   width=width,
+                                   length=length,
+                                   a=a,
+                                   b=b,
+                                   flipHorizontal=flipHorizontal,
+                                   flipVertical=flipVertical,
+                                   direction=direction,
+                                   placement=placement,
+                                   tolerance=tolerance,
+                                   silent=silent)
+        return Face.ByWire(l_shape_wire, tolerance=tolerance, silent=silent)
+
     @staticmethod
     def MedialAxis(face, resolution: int = 0, externalVertices: bool = False, internalVertices: bool = False, toLeavesOnly: bool = False, angTolerance: float = 0.1, tolerance: float = 0.0001):
         """
@@ -3193,6 +3541,119 @@ class Face():
             trimmed_face = face.Difference(trimmed_face)
         return trimmed_face
     
+    @staticmethod
+    def TShape(origin=None,
+            width=1,
+            length=1,
+            a=0.5,
+            b=0.5,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates a T-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the T-shape. The default is None which results in the T-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the T-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the T-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the vertical arm of the T-shape. The default is 0.5.
+        b : float , optional
+            The vertical thickness of the horizontal arm of the T-shape. The default is 0.5.
+        direction : list , optional
+            The vector representing the up direction of the T-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the T-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Face
+            The created T-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Face.TShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Face.TShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Face.TShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Face.LShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Face.TShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Face.TShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Face.TShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Face.TShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Face.TShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b >= (length - tolerance):
+            if not silent:
+                print("Face.TShape - Error: The b input parameter must be less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Face.TShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Face.TShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Face.TShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        t_shape_wire = Wire.TShape(origin=origin,
+                                   width=width,
+                                   length=length,
+                                   a=a,
+                                   b=b,
+                                   flipHorizontal=flipHorizontal,
+                                   flipVertical=flipVertical,
+                                   direction=direction,
+                                   placement=placement,
+                                   tolerance=tolerance,
+                                   silent=silent)
+        return Face.ByWire(t_shape_wire, tolerance=tolerance, silent=silent)
+
     @staticmethod
     def VertexByParameters(face, u: float = 0.5, v: float = 0.5):
         """

topologicpy/Graph.py

@@ -1407,7 +1407,7 @@ class Graph:
             vertices[0] = Topology.SetDictionary(vertices[0], d)
             return [1.0]
         
-        py_graph = Graph.AdjacencyDictionary(g)
+        py_graph = Graph.AdjacencyDictionary(graph)
         betweenness = calculate_betweenness()
         for v in betweenness:
             betweenness[v] /= 2.0  # Each shortest path is counted twice
@@ -6992,7 +6992,6 @@ class Graph:
 
             # Compute positions based on layers
             for depth, nodes in layers.items():
-                print("depth:", depth)
                 # Place nodes in a circular arrangement at each layer
                 num_nodes = len(nodes)
                 angle_step = 2 * np.pi / num_nodes if num_nodes > 0 else 0

topologicpy/Wire.py

@@ -1421,6 +1421,157 @@ class Wire():
         ch = Topology.Unflatten(ch, origin=origin, direction=normal)
         return ch
 
+
+    @staticmethod
+    def CShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            c =0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates a C-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the C-shape. The default is None which results in the C-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the C-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the C-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the vertical arm of the C-shape. The default is 0.25.
+        b : float , optional
+            The vertical thickness of the lower horizontal arm of the C-shape. The default is 0.25.
+        c : float , optional
+            The vertical thickness of the upper horizontal arm of the C-shape. The default is 0.25.
+        direction : list , optional
+            The vector representing the up direction of the C-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the C-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Wire
+            The created C-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Wire.CShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Wire.CShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Wire.CShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Wire.CShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Wire.CShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Wire.CShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Wire.CShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Wire.CShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if c <= tolerance:
+            if not silent:
+                print("Wire.CShape - Error: The c input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Wire.CShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b+c >= (length - tolerance):
+            if not silent:
+                print("Wire.CShape - Error: The b and c input parameters must add to less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Wire.CShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Wire.CShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Wire.CShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        
+        # Define the vertices of the C-shape (counterclockwise)
+        v1 = Vertex.Origin()  # Base origin
+        v2 = Vertex.ByCoordinates(width, 0)
+        v3 = Vertex.ByCoordinates(width, b)
+        v4 = Vertex.ByCoordinates(a, b)
+        v5 = Vertex.ByCoordinates(a, length-c)
+        v6 = Vertex.ByCoordinates(width, length-c)
+        v7 = Vertex.ByCoordinates(width, length)
+        v8 = Vertex.ByCoordinates(0, length)
+
+        # Create the C-shaped wire
+        c_shape = Wire.ByVertices([v1, v2, v3, v4, v5, v6, v7, v8], close=True)
+        c_shape = Topology.Translate(c_shape, -width/2, -length/2, 0)
+        c_shape = Topology.Translate(c_shape, Vertex.X(origin), Vertex.Y(origin), Vertex.Z(origin))
+        reverse = False
+        if flipHorizontal == True:
+            xScale = -1
+            reverse = not reverse
+        else:
+            xScale = 1
+        if flipVertical == True:
+            yScale = -1
+            reverse = not reverse
+        else:
+            yScale = 1
+        if xScale == -1 or yScale == -1:
+            c_shape = Topology.Scale(c_shape, x=xScale, y=yScale, z=1)
+            if reverse == True:
+                c_shape = Wire.Reverse(c_shape)
+        if placement.lower() == "lowerleft":
+            c_shape = Topology.Translate(c_shape, width/2, length/2, 0)
+        elif placement.lower() == "upperright":
+            c_shape = Topology.Translate(c_shape, -width/2, -length/2, 0)
+        elif placement.lower() == "upperleft":
+            c_shape = Topology.Translate(c_shape, width/2, -length/2, 0)
+        elif placement.lower() == "lowerright":
+            c_shape = Topology.Translate(c_shape, -width/2, length/2, 0)
+        
+        if direction != [0, 0, 1]:
+            c_shape = Topology.Orient(c_shape, origin=origin, dirA=[0, 0, 1], dirB=direction)
+        return c_shape
+
     @staticmethod
     def Cycles(wire, maxVertices: int = 4, tolerance: float = 0.0001) -> list:
         """
@@ -2387,6 +2538,161 @@ class Wire():
             return True
         return False
 
+
+    @staticmethod
+    def IShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            c =0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates an I-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the I-shape. The default is None which results in the I-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the I-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the I-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the central vertical arm of the I-shape. The default is 0.25.
+        b : float , optional
+            The vertical thickness of the lower horizontal arm of the I-shape. The default is 0.25.
+        c : float , optional
+            The vertical thickness of the upper horizontal arm of the I-shape. The default is 0.25.
+        direction : list , optional
+            The vector representing the up direction of the I-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the I-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Wire
+            The created I-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Wire.IShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Wire.IShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Wire.IShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Wire.IShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Wire.IShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Wire.IShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Wire.IShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Wire.IShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if c <= tolerance:
+            if not silent:
+                print("Wire.IShape - Error: The c input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Wire.IShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b+c >= (length - tolerance):
+            if not silent:
+                print("Wire.IShape - Error: The b and c input parameters must add to less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Wire.IShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Wire.IShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Wire.IShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        
+        # Define the vertices of the I-shape (counterclockwise)
+        v1 = Vertex.Origin()  # Base origin
+        v2 = Vertex.ByCoordinates(width, 0)
+        v3 = Vertex.ByCoordinates(width, b)
+        v4 = Vertex.ByCoordinates(width/2+a/2, b)
+        v5 = Vertex.ByCoordinates(width/2+a/2, length-c)
+        v6 = Vertex.ByCoordinates(width, length-c)
+        v7 = Vertex.ByCoordinates(width, length)
+        v8 = Vertex.ByCoordinates(0, length)
+        v9 = Vertex.ByCoordinates(0, length-c)
+        v10 = Vertex.ByCoordinates(width/2-a/2, length-c)
+        v11 = Vertex.ByCoordinates(width/2-a/2, b)
+        v12 = Vertex.ByCoordinates(0,b)
+
+        # Create the I-shaped wire
+        i_shape = Wire.ByVertices([v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, v12], close=True)
+        i_shape = Topology.Translate(i_shape, -width/2, -length/2, 0)
+        i_shape = Topology.Translate(i_shape, Vertex.X(origin), Vertex.Y(origin), Vertex.Z(origin))
+        reverse = False
+        if flipHorizontal == True:
+            xScale = -1
+            reverse = not reverse
+        else:
+            xScale = 1
+        if flipVertical == True:
+            yScale = -1
+            reverse = not reverse
+        else:
+            yScale = 1
+        if xScale == -1 or yScale == -1:
+            i_shape = Topology.Scale(i_shape, x=xScale, y=yScale, z=1)
+            if reverse == True:
+                i_shape = Wire.Reverse(i_shape)
+        if placement.lower() == "lowerleft":
+            i_shape = Topology.Translate(i_shape, width/2, length/2, 0)
+        elif placement.lower() == "upperright":
+            i_shape = Topology.Translate(i_shape, -width/2, -length/2, 0)
+        elif placement.lower() == "upperleft":
+            i_shape = Topology.Translate(i_shape, width/2, -length/2, 0)
+        elif placement.lower() == "lowerright":
+            i_shape = Topology.Translate(i_shape, -width/2, length/2, 0)
+        
+        if direction != [0, 0, 1]:
+            i_shape = Topology.Orient(i_shape, origin=origin, dirA=[0, 0, 1], dirB=direction)
+        return i_shape
+
     @staticmethod
     def Length(wire, mantissa: int = 6) -> float:
         """
@@ -2480,7 +2786,148 @@ class Wire():
             vertices.append(Edge.VertexByParameter(edge, i*unitDistance))
         vertices.append(Edge.EndVertex(edge))
         return Wire.ByVertices(vertices)
-    
+
+    @staticmethod
+    def LShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates an L-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the L-shape. The default is None which results in the L-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the L-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the L-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the vertical arm of the L-shape. The default is 0.25.
+        b : float , optional
+            The vertical thickness of the horizontal arm of the L-shape. The default is 0.25.
+        direction : list , optional
+            The vector representing the up direction of the L-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the L-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Wire
+            The created L-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Wire.LShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Wire.LShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Wire.LShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Wire.LShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Wire.LShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b >= (length - tolerance):
+            if not silent:
+                print("Wire.LShape - Error: The b input parameter must be less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Wire.LShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Wire.LShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Wire.LShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        
+        # Define the vertices of the L-shape (counterclockwise)
+        v1 = Vertex.Origin()  # Base origin
+        v2 = Vertex.ByCoordinates(width, 0)  # End of horizontal arm
+        v3 = Vertex.ByCoordinates(width, b)  # Top of horizontal arm
+        v4 = Vertex.ByCoordinates(a, b)  # Transition to vertical arm
+        v5 = Vertex.ByCoordinates(a, length)  # End of vertical arm
+        v6 = Vertex.ByCoordinates(0, length)  # Top of vertical arm
+
+        # Create the L-shaped wire
+        l_shape = Wire.ByVertices([v1, v2, v3, v4, v5, v6], close=True)
+        l_shape = Topology.Translate(l_shape, -width/2, -length/2, 0)
+        l_shape = Topology.Translate(l_shape, Vertex.X(origin), Vertex.Y(origin), Vertex.Z(origin))
+        reverse = False
+        if flipHorizontal == True:
+            xScale = -1
+            reverse = not reverse
+        else:
+            xScale = 1
+        if flipVertical == True:
+            yScale = -1
+            reverse = not reverse
+        else:
+            yScale = 1
+        if xScale == -1 or yScale == -1:
+            l_shape = Topology.Scale(l_shape, x=xScale, y=yScale, z=1)
+            if reverse == True:
+                l_shape = Wire.Reverse(l_shape)
+        if placement.lower() == "lowerleft":
+            l_shape = Topology.Translate(l_shape, width/2, length/2, 0)
+        elif placement.lower() == "upperright":
+            l_shape = Topology.Translate(l_shape, -width/2, -length/2, 0)
+        elif placement.lower() == "upperleft":
+            l_shape = Topology.Translate(l_shape, width/2, -length/2, 0)
+        elif placement.lower() == "lowerright":
+            l_shape = Topology.Translate(l_shape, -width/2, length/2, 0)
+        
+        if direction != [0, 0, 1]:
+            l_shape = Topology.Orient(l_shape, origin=origin, dirA=[0, 0, 1], dirB=direction)
+        return l_shape
+
     @staticmethod
     def Miter(wire, offset: float = 0, offsetKey: str = None, tolerance: float = 0.0001, silent: bool = False):
         """
@@ -4064,6 +4511,150 @@ class Wire():
             baseWire = Topology.Orient(baseWire, origin=origin, dirA=[0, 0, 1], dirB=direction)
         return baseWire
 
+
+    @staticmethod
+    def TShape(origin=None,
+            width=1,
+            length=1,
+            a=0.25,
+            b=0.25,
+            flipHorizontal = False,
+            flipVertical = False,
+            direction=[0,0,1],
+            placement="center",
+            tolerance=0.0001,
+            silent=False):
+        """
+        Creates a T-shape.
+
+        Parameters
+        ----------
+        origin : topologic_core.Vertex , optional
+            The location of the origin of the T-shape. The default is None which results in the L-shape being placed at (0, 0, 0).
+        width : float , optional
+            The overall width of the T-shape. The default is 1.0.
+        length : float , optional
+            The overall length of the T-shape. The default is 1.0.
+        a : float , optional
+            The hortizontal thickness of the vertical arm of the T-shape. The default is 0.5.
+        b : float , optional
+            The vertical thickness of the horizontal arm of the T-shape. The default is 0.5.
+        direction : list , optional
+            The vector representing the up direction of the T-shape. The default is [0, 0, 1].
+        placement : str , optional
+            The description of the placement of the origin of the T-shape. This can be "center", "lowerleft", "upperleft", "lowerright", "upperright". It is case insensitive. The default is "center".
+        tolerance : float , optional
+            The desired tolerance. The default is 0.0001.
+        silent : bool , optional
+            If set to True, no error and warning messages are printed. Otherwise, they are. The default is False.
+
+        Returns
+        -------
+        topologic_core.Wire
+            The created T-shape.
+
+        """
+        from topologicpy.Vertex import Vertex
+        from topologicpy.Wire import Wire
+        from topologicpy.Topology import Topology
+
+        if not isinstance(width, int) and not isinstance(width, float):
+            if not silent:
+                print("Wire.LShape - Error: The width input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(length, int) and not isinstance(length, float):
+            if not silent:
+                print("Wire.LShape - Error: The length input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(a, int) and not isinstance(a, float):
+            if not silent:
+                print("Wire.LShape - Error: The a input parameter is not a valid number. Returning None.")
+            return None
+        if not isinstance(b, int) and not isinstance(b, float):
+            if not silent:
+                print("Wire.LShape - Error: The b input parameter is not a valid number. Returning None.")
+            return None
+        if width <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The width input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if length <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The length input parameter must be a positive number  greater than the tolerance input parameter. Returning None.")
+            return None
+        if a <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The a input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if b <= tolerance:
+            if not silent:
+                print("Wire.LShape - Error: The b input parameter must be a positive number greater than the tolerance input parameter. Returning None.")
+            return None
+        if a >= (width - tolerance):
+            if not silent:
+                print("Wire.LShape - Error: The a input parameter must be less than the width input parameter. Returning None.")
+            return None
+        if b >= (length - tolerance):
+            if not silent:
+                print("Wire.LShape - Error: The b input parameter must be less than the length input parameter. Returning None.")
+            return None
+        if origin == None:
+            origin = Vertex.Origin()
+        if not Topology.IsInstance(origin, "vertex"):
+            if not silent:
+                print("Wire.LShape - Error: The origin input parameter is not a valid topologic vertex. Returning None.")
+            return None
+        if not isinstance(direction, list):
+            if not silent:
+                print("Wire.LShape - Error: The direction input parameter is not a valid list. Returning None.")
+            return None
+        if not len(direction) == 3:
+            if not silent:
+                print("Wire.LShape - Error: The direction input parameter is not a valid vector. Returning None.")
+            return None
+        
+        # Define the vertices of the T-shape (counterclockwise)
+        v1 = Vertex.ByCoordinates(width/2-a/2, 0)
+        v2 = Vertex.ByCoordinates(width/2+a/2, 0)
+        v3 = Vertex.ByCoordinates(width/2+a/2, length-b)
+        v4 = Vertex.ByCoordinates(width, length-b)
+        v5 = Vertex.ByCoordinates(width, length)
+        v6 = Vertex.ByCoordinates(0, length)
+        v7 = Vertex.ByCoordinates(0, length-b)
+        v8 = Vertex.ByCoordinates(width/2-a/2, length-b)  # Top of vertical arm
+
+        # Create the T-shaped wire
+        t_shape = Wire.ByVertices([v1, v2, v3, v4, v5, v6, v7, v8], close=True)
+        t_shape = Topology.Translate(t_shape, -width/2, -length/2, 0)
+        t_shape = Topology.Translate(t_shape, Vertex.X(origin), Vertex.Y(origin), Vertex.Z(origin))
+        reverse = False
+        if flipHorizontal == True:
+            xScale = -1
+            reverse = not reverse
+        else:
+            xScale = 1
+        if flipVertical == True:
+            yScale = -1
+            reverse = not reverse
+        else:
+            yScale = 1
+        if xScale == -1 or yScale == -1:
+            t_shape = Topology.Scale(t_shape, x=xScale, y=yScale, z=1)
+            if reverse == True:
+                t_shape = Wire.Reverse(t_shape)
+        if placement.lower() == "lowerleft":
+            t_shape = Topology.Translate(t_shape, width/2, length/2, 0)
+        elif placement.lower() == "upperright":
+            t_shape = Topology.Translate(t_shape, -width/2, -length/2, 0)
+        elif placement.lower() == "upperleft":
+            t_shape = Topology.Translate(t_shape, width/2, -length/2, 0)
+        elif placement.lower() == "lowerright":
+            t_shape = Topology.Translate(t_shape, -width/2, length/2, 0)
+        
+        if direction != [0, 0, 1]:
+            t_shape = Topology.Orient(t_shape, origin=origin, dirA=[0, 0, 1], dirB=direction)
+        return t_shape
+
     @staticmethod
     def VertexDistance(wire, vertex, origin= None, mantissa: int = 6, tolerance: float = 0.0001):
         """

topologicpy/version.py

@@ -1 +1 @@
-__version__ = '0.7.92'
+__version__ = '0.7.94'

{topologicpy-0.7.92.dist-info → topologicpy-0.7.94.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: topologicpy
-Version: 0.7.92
+Version: 0.7.94
 Summary: An AI-Powered Spatial Modelling and Analysis Software Library for Architecture, Engineering, and Construction.
 Author-email: Wassim Jabi <wassim.jabi@gmail.com>
 License: AGPL v3 License

{topologicpy-0.7.92.dist-info → topologicpy-0.7.94.dist-info}/RECORD

@@ -10,8 +10,8 @@ topologicpy/DGL.py,sha256=Dd6O08D-vSxpjHYgKm45JpKiaeGvWlg1BRMzYMAXGNc,138991
 topologicpy/Dictionary.py,sha256=t0O7Du-iPq46FyKqZfcjHfsUK1E8GS_e67R2V5cpkbw,33186
 topologicpy/Edge.py,sha256=KWOJCkLDwCWyZJ5MKwDhT5umWwCYBHtLOz6ulHrSOfY,67205
 topologicpy/EnergyModel.py,sha256=AqTtmXE35SxvRXhG3vYAQd7GQDW-6HtjYPHua6ME4Eg,53762
-topologicpy/Face.py,sha256=2k1vSRK1M-s588RcqGHEalwIHJ9nT3qgx3pU4ktN0dU,150077
-topologicpy/Graph.py,sha256=LJek7dV9bq9uBf_2akAYrETjbSFfoPgLaMsHs4brvc4,455475
+topologicpy/Face.py,sha256=wczXpMcfub8Eb10lA4rrXksvi5YYCbRjBdp3lOTUwK0,172618
+topologicpy/Graph.py,sha256=oA647-h9McD0jm2JDsLl0DV93k5ikk8tSGxptlRgL-s,455440
 topologicpy/Grid.py,sha256=2s9cSlWldivn1i9EUz4OOokJyANveqmRe_vR93CAndI,18245
 topologicpy/Helper.py,sha256=F3h4_qcOD_PHAoVe0tEbEE7_jYyVcaHjtwVs4QHOZuI,23978
 topologicpy/Honeybee.py,sha256=HfTaEV1R8K1xOVQQy9sBOhBTF_ap8A2RxZOYhirp_Mw,21835
@@ -26,11 +26,11 @@ topologicpy/Sun.py,sha256=42tDWMYpwRG7Z2Qjtp94eRgBuqySq7k8TgNUZDK7QxQ,36837
 topologicpy/Topology.py,sha256=d99wryPPXvw7eRw12GVKV-DT6jhlmVq6GsMAjg-E-40,441693
 topologicpy/Vector.py,sha256=Cl7besf20cAGmyNPh-9gbFAHnRU5ZWSMChJ3VyFIDs4,35416
 topologicpy/Vertex.py,sha256=sYWTbAHqKGRUAJRCIUqrCO_xFhvsXK09Sx7E4dafPLQ,73754
-topologicpy/Wire.py,sha256=HjagWKoJb8Z3zhgOij_4k6ZnKIl5gk8LletHbsT1ZKU,190632
+topologicpy/Wire.py,sha256=KDmnBzzM-9qNBt1vBPnj3t7g0y3R-sRFD2hz6zd769s,218625
 topologicpy/__init__.py,sha256=vlPCanUbxe5NifC4pHcnhSzkmmYcs_UrZrTlVMsxcFs,928
-topologicpy/version.py,sha256=hEe71TmHDfYxdkk064adNlI0kHL1_wHg4VoGMKoeSWM,23
-topologicpy-0.7.92.dist-info/LICENSE,sha256=FK0vJ73LuE8PYJAn7LutsReWR47-Ooovw2dnRe5yV6Q,681
-topologicpy-0.7.92.dist-info/METADATA,sha256=t-giZYVXIF8phaA32BSO55_r4qGngtkKS_MMHUjD-aA,10513
-topologicpy-0.7.92.dist-info/WHEEL,sha256=PZUExdf71Ui_so67QXpySuHtCi3-J3wvF4ORK6k_S8U,91
-topologicpy-0.7.92.dist-info/top_level.txt,sha256=J30bDzW92Ob7hw3zA8V34Jlp-vvsfIkGzkr8sqvb4Uw,12
-topologicpy-0.7.92.dist-info/RECORD,,
+topologicpy/version.py,sha256=t2Dbe3Vr_6iOI6IajmMK9OGe8SMnlHO_9Zd7vUrwzAg,23
+topologicpy-0.7.94.dist-info/LICENSE,sha256=FK0vJ73LuE8PYJAn7LutsReWR47-Ooovw2dnRe5yV6Q,681
+topologicpy-0.7.94.dist-info/METADATA,sha256=fh-3ZDxjF6yIejVjCdy7CR1S5prt8Ew8xS4KST5rZRw,10513
+topologicpy-0.7.94.dist-info/WHEEL,sha256=PZUExdf71Ui_so67QXpySuHtCi3-J3wvF4ORK6k_S8U,91
+topologicpy-0.7.94.dist-info/top_level.txt,sha256=J30bDzW92Ob7hw3zA8V34Jlp-vvsfIkGzkr8sqvb4Uw,12
+topologicpy-0.7.94.dist-info/RECORD,,