tencentcloud-sdk-python-intl-en 3.0.1280__py2.py3-none-any.whl → 3.0.1282__py2.py3-none-any.whl

tencentcloud/__init__.py

@@ -13,4 +13,4 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-__version__ = '3.0.1280'
+__version__ = '3.0.1282'

tencentcloud/faceid/v20180301/models.py

@@ -522,20 +522,21 @@ Default value: 1
 4: Motion- and reflection-based liveness detection
 Default value: 4
         :type SecurityLevel: int
-        :param _IdCardType: Card Types Supported for Authentication: Currently supported types are as follows:
-1.HK (Default): Hong Kong (China) Identity Card
-2.ML: Malaysia Identity Card
-3.IndonesiaIDCard: Indonesia Identity Card
-4.PhilippinesVoteID: Philippines Voter ID
-5.PhilippinesDrivingLicense: Philippines Driving License
-6.PhilippinesTinID: Philippines Tin ID
-7.PhilippinesSSSID: Philippines SSS ID
-8.PhilippinesUMID: Philippines UMID
-9.MLIDPassport: Passports of Hong Kong, Macao, Taiwan Regions (China) and Foreign Countries
-10.ThailandIDCard: Thailand Identity Card
-11.MainlandIDCard: Mainland China Identity Card
-12.SingaporeIDCard: Singapore Identity Card
-13.HMTPermit: Exit-Entry Permit for Travel to and from Hong Kong, Macao and Taiwan (China)
+        :param _IdCardType: Specifies the identity document type used for authentication. valid values:.  
+
+HK (default): hong kong (china) identity card.
+2. ML: malaysian identity card.
+Indonesian identity card.
+4. PhilippinesVoteID: specifies the voter card in the philippines.
+5. PhilippinesDrivingLicense: specifies the driving license in philippines.
+6. PhilippinesTinID: specifies the philippines tin id.
+7. PhilippinesSSSID: specifies the SSSID in the philippines.
+8. philippines UMID: specifies the philippines UMID.
+9. MLIDPassport: specifies the passport for hong kong (china), macao (china), and taiwan (china) as well as overseas passports.
+ThailandIDCard: specifies the thai identity card.
+Mainland id card.
+12. SingaporeIDCard: specifies the Singapore id card.
+13. HMTPermit: specifies the hong kong, macau and taiwan travel permit.
         :type IdCardType: str
         :param _CompareImage: The Base64-encoded value of the photo to compare, which is required only when `CheckMode` is set to `2`.
         :type CompareImage: str
@@ -546,9 +547,13 @@ Default value: 4
         :param _DisableCheckOcrWarnings: Whether to disable the OCR warnings. Default value: `false` (not disable), where OCR warnings are enabled and the OCR result will not be returned if there is a warning.
 This feature applies only to Hong Kong (China) identity cards, Malaysian identity cards, and passports.
         :type DisableCheckOcrWarnings: bool
+        :param _SelectedWarningCodes: Customize which alarm codes to block. If left blank, all alarm codes will be blocked by default.
+Optional alarm codes are: -9101 (occlusion or incomplete border), -9102 (photocopying), -9103 (screen capture by camera), -9104 (image editing/PS modification), -9107 (glare/reflection), -9108 (blurriness), -9901 (other alarms).
+        :type SelectedWarningCodes: list of int
         :param _Extra: A passthrough field, which is returned together with the verification result and can contain up to 1,024 bits.
         :type Extra: str
-        :param _SdkVersion: ENHANCED: Enhanced Version, BASIC: Basic Version (Default)
+        :param _SdkVersion: ENHANCED: enhanced.
+BASIC: basic version (default).
         :type SdkVersion: str
         :param _ActionList: This interface is used to control th action sequences.
 Action types are as follows:
@@ -569,6 +574,7 @@ The default value is blink. The different action types passed in this parameter
         self._NeedVerifyIdCard = None
         self._DisableChangeOcrResult = None
         self._DisableCheckOcrWarnings = None
+        self._SelectedWarningCodes = None
         self._Extra = None
         self._SdkVersion = None
         self._ActionList = None
@@ -606,20 +612,21 @@ Default value: 4
 
     @property
     def IdCardType(self):
-        r"""Card Types Supported for Authentication: Currently supported types are as follows:
-1.HK (Default): Hong Kong (China) Identity Card
-2.ML: Malaysia Identity Card
-3.IndonesiaIDCard: Indonesia Identity Card
-4.PhilippinesVoteID: Philippines Voter ID
-5.PhilippinesDrivingLicense: Philippines Driving License
-6.PhilippinesTinID: Philippines Tin ID
-7.PhilippinesSSSID: Philippines SSS ID
-8.PhilippinesUMID: Philippines UMID
-9.MLIDPassport: Passports of Hong Kong, Macao, Taiwan Regions (China) and Foreign Countries
-10.ThailandIDCard: Thailand Identity Card
-11.MainlandIDCard: Mainland China Identity Card
-12.SingaporeIDCard: Singapore Identity Card
-13.HMTPermit: Exit-Entry Permit for Travel to and from Hong Kong, Macao and Taiwan (China)
+        r"""Specifies the identity document type used for authentication. valid values:.  
+
+HK (default): hong kong (china) identity card.
+2. ML: malaysian identity card.
+Indonesian identity card.
+4. PhilippinesVoteID: specifies the voter card in the philippines.
+5. PhilippinesDrivingLicense: specifies the driving license in philippines.
+6. PhilippinesTinID: specifies the philippines tin id.
+7. PhilippinesSSSID: specifies the SSSID in the philippines.
+8. philippines UMID: specifies the philippines UMID.
+9. MLIDPassport: specifies the passport for hong kong (china), macao (china), and taiwan (china) as well as overseas passports.
+ThailandIDCard: specifies the thai identity card.
+Mainland id card.
+12. SingaporeIDCard: specifies the Singapore id card.
+13. HMTPermit: specifies the hong kong, macau and taiwan travel permit.
         :rtype: str
         """
         return self._IdCardType
@@ -677,6 +684,18 @@ This feature applies only to Hong Kong (China) identity cards, Malaysian identit
     def DisableCheckOcrWarnings(self, DisableCheckOcrWarnings):
         self._DisableCheckOcrWarnings = DisableCheckOcrWarnings
 
+    @property
+    def SelectedWarningCodes(self):
+        r"""Customize which alarm codes to block. If left blank, all alarm codes will be blocked by default.
+Optional alarm codes are: -9101 (occlusion or incomplete border), -9102 (photocopying), -9103 (screen capture by camera), -9104 (image editing/PS modification), -9107 (glare/reflection), -9108 (blurriness), -9901 (other alarms).
+        :rtype: list of int
+        """
+        return self._SelectedWarningCodes
+
+    @SelectedWarningCodes.setter
+    def SelectedWarningCodes(self, SelectedWarningCodes):
+        self._SelectedWarningCodes = SelectedWarningCodes
+
     @property
     def Extra(self):
         r"""A passthrough field, which is returned together with the verification result and can contain up to 1,024 bits.
@@ -690,7 +709,8 @@ This feature applies only to Hong Kong (China) identity cards, Malaysian identit
 
     @property
     def SdkVersion(self):
-        r"""ENHANCED: Enhanced Version, BASIC: Basic Version (Default)
+        r"""ENHANCED: enhanced.
+BASIC: basic version (default).
         :rtype: str
         """
         return self._SdkVersion
@@ -728,6 +748,7 @@ The default value is blink. The different action types passed in this parameter
         self._NeedVerifyIdCard = params.get("NeedVerifyIdCard")
         self._DisableChangeOcrResult = params.get("DisableChangeOcrResult")
         self._DisableCheckOcrWarnings = params.get("DisableCheckOcrWarnings")
+        self._SelectedWarningCodes = params.get("SelectedWarningCodes")
         self._Extra = params.get("Extra")
         self._SdkVersion = params.get("SdkVersion")
         self._ActionList = params.get("ActionList")
@@ -748,7 +769,7 @@ class ApplySdkVerificationTokenResponse(AbstractModel):
 
     def __init__(self):
         r"""
-        :param _SdkToken: The token used to identify an SDK-based verification process. It is valid for 7,200s and can be used to get the verification result after the process is completed.
+        :param _SdkToken: A token that identifies an SDK verification process. the validity time is 10 minutes. after the process is complete, the token can be used to retrieve the verification result.
         :type SdkToken: str
         :param _RequestId: The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.
         :type RequestId: str
@@ -758,7 +779,7 @@ class ApplySdkVerificationTokenResponse(AbstractModel):
 
     @property
     def SdkToken(self):
-        r"""The token used to identify an SDK-based verification process. It is valid for 7,200s and can be used to get the verification result after the process is completed.
+        r"""A token that identifies an SDK verification process. the validity time is 10 minutes. after the process is complete, the token can be used to retrieve the verification result.
         :rtype: str
         """
         return self._SdkToken

tencentcloud/mps/v20190612/models.py

@@ -41912,12 +41912,24 @@ class ProcessImageRequest(AbstractModel):
         :type OutputStorage: :class:`tencentcloud.mps.v20190612.models.TaskOutputStorage`
         :param _OutputDir: Output file path for image processing. If left blank, it is the directory of the file in InputInfo. If it is a directory, such as `/image/201907/`, it means inheriting the original filename and outputting to this directory.
         :type OutputDir: str
+        :param _OutputPath: Output path, which can be a relative or an absolute path.
+The path must end with `.{format}`. For details, please refer to the [Filename Variable](https://www.tencentcloud.comom/document/product/862/37039?from_cn_redirect=1).
+**Relative path example:**
+<Li>`Filename_{Variablename}.{format}`.</li>
+<Li>`Filename.{format}`.</li>
+
+**Absolute path example:**
+<Li>`/Path/Filename_{Variablename}.{format}`.</li>
+
+If not filled in, default relative path: `{inputName}.{format}`.
+        :type OutputPath: str
         :param _ImageTask: Image processing parameter.
         :type ImageTask: :class:`tencentcloud.mps.v20190612.models.ImageTaskInput`
         """
         self._InputInfo = None
         self._OutputStorage = None
         self._OutputDir = None
+        self._OutputPath = None
         self._ImageTask = None
 
     @property
@@ -41953,6 +41965,26 @@ class ProcessImageRequest(AbstractModel):
     def OutputDir(self, OutputDir):
         self._OutputDir = OutputDir
 
+    @property
+    def OutputPath(self):
+        r"""Output path, which can be a relative or an absolute path.
+The path must end with `.{format}`. For details, please refer to the [Filename Variable](https://www.tencentcloud.comom/document/product/862/37039?from_cn_redirect=1).
+**Relative path example:**
+<Li>`Filename_{Variablename}.{format}`.</li>
+<Li>`Filename.{format}`.</li>
+
+**Absolute path example:**
+<Li>`/Path/Filename_{Variablename}.{format}`.</li>
+
+If not filled in, default relative path: `{inputName}.{format}`.
+        :rtype: str
+        """
+        return self._OutputPath
+
+    @OutputPath.setter
+    def OutputPath(self, OutputPath):
+        self._OutputPath = OutputPath
+
     @property
     def ImageTask(self):
         r"""Image processing parameter.
@@ -41973,6 +42005,7 @@ class ProcessImageRequest(AbstractModel):
             self._OutputStorage = TaskOutputStorage()
             self._OutputStorage._deserialize(params.get("OutputStorage"))
         self._OutputDir = params.get("OutputDir")
+        self._OutputPath = params.get("OutputPath")
         if params.get("ImageTask") is not None:
             self._ImageTask = ImageTaskInput()
             self._ImageTask._deserialize(params.get("ImageTask"))

tencentcloud/quota/v20241204/errorcodes.py

@@ -0,0 +1,33 @@
+# -*- coding: utf8 -*-
+# Copyright (c) 2017-2025 Tencent. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# Alarm rule does not exist.
+RESOURCENOTFOUND_ALARMNOTEXIST = 'ResourceNotFound.AlarmNotExist'
+
+# Member not in organization.
+RESOURCENOTFOUND_MEMBERNOTEXIST = 'ResourceNotFound.MemberNotExist'
+
+# Product is not exist.
+RESOURCENOTFOUND_PRODUCTNOTEXIST = 'ResourceNotFound.ProductNotExist'
+
+# UserQuota is not exist.
+RESOURCENOTFOUND_USERQUOTANOTEXIST = 'ResourceNotFound.UserQuotaNotExist'
+
+# Unauthorized operation.
+UNAUTHORIZEDOPERATION = 'UnauthorizedOperation'
+
+# Alarm name is exist.
+UNSUPPORTEDOPERATION_ALARMISEXIST = 'UnsupportedOperation.AlarmIsExist'

tencentcloud/quota/v20241204/models.py

@@ -0,0 +1,172 @@
+# -*- coding: utf8 -*-
+# Copyright (c) 2017-2025 Tencent. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import warnings
+
+from tencentcloud.common.abstract_model import AbstractModel
+
+
+class CreateAlarmRequest(AbstractModel):
+    r"""CreateAlarm request structure.
+
+    """
+
+    def __init__(self):
+        r"""
+        :param _Name: Alarm rule name. specifies the name of the Alarm rule.
+        :type Name: str
+        :param _ProductId: Product ID.
+        :type ProductId: int
+        :param _QuotaId: Quota ID.
+        :type QuotaId: int
+        :param _Metrics: Alert metrics 1: quota usage 2: quota usage rate 3: remaining quota 4: remaining quota rate.
+        :type Metrics: int
+        :param _Threshold: Specifies the Alarm threshold. value range: 0-100.
+        :type Threshold: int
+        :param _Frequency: Alarm frequency.
+        :type Frequency: int
+        :param _MemberUin:   Member UIN
+        :type MemberUin: int
+        """
+        self._Name = None
+        self._ProductId = None
+        self._QuotaId = None
+        self._Metrics = None
+        self._Threshold = None
+        self._Frequency = None
+        self._MemberUin = None
+
+    @property
+    def Name(self):
+        r"""Alarm rule name. specifies the name of the Alarm rule.
+        :rtype: str
+        """
+        return self._Name
+
+    @Name.setter
+    def Name(self, Name):
+        self._Name = Name
+
+    @property
+    def ProductId(self):
+        r"""Product ID.
+        :rtype: int
+        """
+        return self._ProductId
+
+    @ProductId.setter
+    def ProductId(self, ProductId):
+        self._ProductId = ProductId
+
+    @property
+    def QuotaId(self):
+        r"""Quota ID.
+        :rtype: int
+        """
+        return self._QuotaId
+
+    @QuotaId.setter
+    def QuotaId(self, QuotaId):
+        self._QuotaId = QuotaId
+
+    @property
+    def Metrics(self):
+        r"""Alert metrics 1: quota usage 2: quota usage rate 3: remaining quota 4: remaining quota rate.
+        :rtype: int
+        """
+        return self._Metrics
+
+    @Metrics.setter
+    def Metrics(self, Metrics):
+        self._Metrics = Metrics
+
+    @property
+    def Threshold(self):
+        r"""Specifies the Alarm threshold. value range: 0-100.
+        :rtype: int
+        """
+        return self._Threshold
+
+    @Threshold.setter
+    def Threshold(self, Threshold):
+        self._Threshold = Threshold
+
+    @property
+    def Frequency(self):
+        r"""Alarm frequency.
+        :rtype: int
+        """
+        return self._Frequency
+
+    @Frequency.setter
+    def Frequency(self, Frequency):
+        self._Frequency = Frequency
+
+    @property
+    def MemberUin(self):
+        r"""  Member UIN
+        :rtype: int
+        """
+        return self._MemberUin
+
+    @MemberUin.setter
+    def MemberUin(self, MemberUin):
+        self._MemberUin = MemberUin
+
+
+    def _deserialize(self, params):
+        self._Name = params.get("Name")
+        self._ProductId = params.get("ProductId")
+        self._QuotaId = params.get("QuotaId")
+        self._Metrics = params.get("Metrics")
+        self._Threshold = params.get("Threshold")
+        self._Frequency = params.get("Frequency")
+        self._MemberUin = params.get("MemberUin")
+        memeber_set = set(params.keys())
+        for name, value in vars(self).items():
+            property_name = name[1:]
+            if property_name in memeber_set:
+                memeber_set.remove(property_name)
+        if len(memeber_set) > 0:
+            warnings.warn("%s fileds are useless." % ",".join(memeber_set))
+        
+
+
+class CreateAlarmResponse(AbstractModel):
+    r"""CreateAlarm response structure.
+
+    """
+
+    def __init__(self):
+        r"""
+        :param _RequestId: The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.
+        :type RequestId: str
+        """
+        self._RequestId = None
+
+    @property
+    def RequestId(self):
+        r"""The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.
+        :rtype: str
+        """
+        return self._RequestId
+
+    @RequestId.setter
+    def RequestId(self, RequestId):
+        self._RequestId = RequestId
+
+
+    def _deserialize(self, params):
+        self._RequestId = params.get("RequestId")

tencentcloud/quota/v20241204/quota_client.py

@@ -0,0 +1,49 @@
+# -*- coding: utf8 -*-
+# Copyright (c) 2017-2025 Tencent. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+
+from tencentcloud.common.exception.tencent_cloud_sdk_exception import TencentCloudSDKException
+from tencentcloud.common.abstract_client import AbstractClient
+from tencentcloud.quota.v20241204 import models
+
+
+class QuotaClient(AbstractClient):
+    _apiVersion = '2024-12-04'
+    _endpoint = 'quota.intl.tencentcloudapi.com'
+    _service = 'quota'
+
+
+    def CreateAlarm(self, request):
+        r"""Add alarm rules
+
+        :param request: Request instance for CreateAlarm.
+        :type request: :class:`tencentcloud.quota.v20241204.models.CreateAlarmRequest`
+        :rtype: :class:`tencentcloud.quota.v20241204.models.CreateAlarmResponse`
+
+        """
+        try:
+            params = request._serialize()
+            headers = request.headers
+            body = self.call("CreateAlarm", params, headers=headers)
+            response = json.loads(body)
+            model = models.CreateAlarmResponse()
+            model._deserialize(response["Response"])
+            return model
+        except Exception as e:
+            if isinstance(e, TencentCloudSDKException):
+                raise
+            else:
+                raise TencentCloudSDKException(type(e).__name__, str(e))

tencentcloud/tcaplusdb/v20190823/models.py

@@ -631,56 +631,44 @@ class ClusterInfo(AbstractModel):
         :type ApiAccessIp: str
         :param _ApiAccessPort: TcaplusDB SDK connection parameter: access port
         :type ApiAccessPort: int
-        :param _OldPasswordExpireTime: If `PasswordStatus` is `unmodifiable`, the old password has not expired, and this field will display its expiration time; otherwise, this field will be empty
-Note: this field may return null, indicating that no valid values can be obtained.
+        :param _OldPasswordExpireTime: If the value of PasswordStatus is unmodifiable, it indicates that the old password has not expired. This field will display the expiration time of the old password; otherwise, the value is null.
         :type OldPasswordExpireTime: str
-        :param _ApiAccessIpv6: TcaplusDB SDK connection parameter for accessing IPv6 addresses
-Note: this field may return null, indicating that no valid values can be obtained.
+        :param _ApiAccessIpv6: TencentDB for TcaplusDB (TcaplusDB) SDK connection parameters, which are used to access the IPv6 address.
         :type ApiAccessIpv6: str
-        :param _ClusterType: Cluster type. Valid values: `0` and `1` (shared cluster), `2` (dedicated cluster).
-Note: This field may return null, indicating that no valid values can be obtained.
+        :param _ClusterType: Cluster type. 0,1: shared cluster; 2: independent cluster.
         :type ClusterType: int
-        :param _ClusterStatus: Cluster status. Valid values: `0` (Running), `1` (Isolated. This status is caused by overdue payments), `2` (To be repossessed. This status is caused when the cluster is actively deleted.),·`3` (To be released. The resources occupied by the table can be released in this status.), `4` (Modifying).
-Note: This field may return null, indicating that no valid values can be obtained.
+        :param _ClusterStatus: Cluster status. 0: indicates normal operation; 1: indicates frozen isolation (usually due to arrears); 2: indicates to be recycled (usually when the user proactively triggers deletion); 3: pending release (indicating that resources occupied by this table can be released); 4: changing.
         :type ClusterStatus: int
-        :param _ReadCapacityUnit: Read CU
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _ReadCapacityUnit: Read CU.
         :type ReadCapacityUnit: int
-        :param _WriteCapacityUnit: Write CU
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _WriteCapacityUnit: Write CU.
         :type WriteCapacityUnit: int
-        :param _DiskVolume: Disk capacity
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _DiskVolume: Disk capacity.
         :type DiskVolume: int
-        :param _ServerList: Information of the machine at the storage layer (tcapsvr) in a dedicated cluster
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _ServerList: Information about the dedicated server.
         :type ServerList: list of ServerDetailInfo
-        :param _ProxyList: Information of the machine at the access layer (tcaproxy) in a dedicated cluster
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _ProxyList: Information about the dedicated proxy server.
         :type ProxyList: list of ProxyDetailInfo
         :param _Censorship: Whether the cluster operation approval feature is enabled. Valid values: `0` (disabled), `1` (enabled)
         :type Censorship: int
-        :param _DbaUins: Approver UIN list
-Note: `null` may be returned for this field, indicating that no valid values can be obtained.
+        :param _DbaUins: Approver UIN list.
         :type DbaUins: list of str
-        :param _DataFlowStatus: Whether data subscription is enabled
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _DataFlowStatus: Whether data subscription is enabled.
         :type DataFlowStatus: int
-        :param _KafkaInfo: CKafka information when data subscription is enabled
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        :param _KafkaInfo: Kafka information for data subscription.
         :type KafkaInfo: :class:`tencentcloud.tcaplusdb.v20190823.models.KafkaInfo`
-        :param _TxhBackupExpireDay: The number of days after which the cluster Txh backup file will expire and be deleted.
-Note: This field may return `null`, indicating that no valid values can be obtained.
+        :param _TxhBackupExpireDay: Retention period for the Txh backup file of the cluster before expiration and deletion.
         :type TxhBackupExpireDay: int
-        :param _UlogBackupExpireDay: The number of days after which the cluster Ulog backup file will expire and be deleted.
-Note: This field may return `null`, indicating that no valid values can be obtained.
+        :param _UlogBackupExpireDay: Retention period for the Ulog backup file of the cluster before expiration and deletion.
         :type UlogBackupExpireDay: int
-        :param _IsReadOnlyUlogBackupExpireDay: Whether the expiration policy of cluster Ulog backup file is read-only. `0`: Yes; `1`: No.
-Note: This field may return `null`, indicating that no valid values can be obtained.
+        :param _IsReadOnlyUlogBackupExpireDay: Whether the expiration policy for the Ulog backup file of the cluster is read-only. 0: UlogBackupExpire is read-only and cannot be modified; 1: UlogBackupExpire can be modified.
         :type IsReadOnlyUlogBackupExpireDay: int
-        :param _RestProxyStatus: restproxy Status
-Note: This field may return null, indicating that no valid values can be obtained.
+        :param _RestProxyStatus: restproxy status.
         :type RestProxyStatus: int
+        :param _ShardTotalNum: Total number of shards in the cluster.
+        :type ShardTotalNum: int
+        :param _ShardUsedNum: Total number of used shards.
+        :type ShardUsedNum: int
         """
         self._ClusterName = None
         self._ClusterId = None
@@ -712,6 +700,8 @@ Note: This field may return null, indicating that no valid values can be obtaine
         self._UlogBackupExpireDay = None
         self._IsReadOnlyUlogBackupExpireDay = None
         self._RestProxyStatus = None
+        self._ShardTotalNum = None
+        self._ShardUsedNum = None
 
     @property
     def ClusterName(self):
@@ -858,8 +848,7 @@ Note: This field may return null, indicating that no valid values can be obtaine
 
     @property
     def OldPasswordExpireTime(self):
-        r"""If `PasswordStatus` is `unmodifiable`, the old password has not expired, and this field will display its expiration time; otherwise, this field will be empty
-Note: this field may return null, indicating that no valid values can be obtained.
+        r"""If the value of PasswordStatus is unmodifiable, it indicates that the old password has not expired. This field will display the expiration time of the old password; otherwise, the value is null.
         :rtype: str
         """
         return self._OldPasswordExpireTime
@@ -870,8 +859,7 @@ Note: this field may return null, indicating that no valid values can be obtaine
 
     @property
     def ApiAccessIpv6(self):
-        r"""TcaplusDB SDK connection parameter for accessing IPv6 addresses
-Note: this field may return null, indicating that no valid values can be obtained.
+        r"""TencentDB for TcaplusDB (TcaplusDB) SDK connection parameters, which are used to access the IPv6 address.
         :rtype: str
         """
         return self._ApiAccessIpv6
@@ -882,8 +870,7 @@ Note: this field may return null, indicating that no valid values can be obtaine
 
     @property
     def ClusterType(self):
-        r"""Cluster type. Valid values: `0` and `1` (shared cluster), `2` (dedicated cluster).
-Note: This field may return null, indicating that no valid values can be obtained.
+        r"""Cluster type. 0,1: shared cluster; 2: independent cluster.
         :rtype: int
         """
         return self._ClusterType
@@ -894,8 +881,7 @@ Note: This field may return null, indicating that no valid values can be obtaine
 
     @property
     def ClusterStatus(self):
-        r"""Cluster status. Valid values: `0` (Running), `1` (Isolated. This status is caused by overdue payments), `2` (To be repossessed. This status is caused when the cluster is actively deleted.),·`3` (To be released. The resources occupied by the table can be released in this status.), `4` (Modifying).
-Note: This field may return null, indicating that no valid values can be obtained.
+        r"""Cluster status. 0: indicates normal operation; 1: indicates frozen isolation (usually due to arrears); 2: indicates to be recycled (usually when the user proactively triggers deletion); 3: pending release (indicating that resources occupied by this table can be released); 4: changing.
         :rtype: int
         """
         return self._ClusterStatus
@@ -906,8 +892,7 @@ Note: This field may return null, indicating that no valid values can be obtaine
 
     @property
     def ReadCapacityUnit(self):
-        r"""Read CU
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Read CU.
         :rtype: int
         """
         return self._ReadCapacityUnit
@@ -918,8 +903,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def WriteCapacityUnit(self):
-        r"""Write CU
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Write CU.
         :rtype: int
         """
         return self._WriteCapacityUnit
@@ -930,8 +914,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def DiskVolume(self):
-        r"""Disk capacity
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Disk capacity.
         :rtype: int
         """
         return self._DiskVolume
@@ -942,8 +925,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def ServerList(self):
-        r"""Information of the machine at the storage layer (tcapsvr) in a dedicated cluster
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Information about the dedicated server.
         :rtype: list of ServerDetailInfo
         """
         return self._ServerList
@@ -954,8 +936,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def ProxyList(self):
-        r"""Information of the machine at the access layer (tcaproxy) in a dedicated cluster
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Information about the dedicated proxy server.
         :rtype: list of ProxyDetailInfo
         """
         return self._ProxyList
@@ -977,8 +958,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def DbaUins(self):
-        r"""Approver UIN list
-Note: `null` may be returned for this field, indicating that no valid values can be obtained.
+        r"""Approver UIN list.
         :rtype: list of str
         """
         return self._DbaUins
@@ -989,8 +969,7 @@ Note: `null` may be returned for this field, indicating that no valid values can
 
     @property
     def DataFlowStatus(self):
-        r"""Whether data subscription is enabled
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Whether data subscription is enabled.
         :rtype: int
         """
         return self._DataFlowStatus
@@ -1001,8 +980,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def KafkaInfo(self):
-        r"""CKafka information when data subscription is enabled
-Note: this field may return `null`, indicating that no valid values can be obtained.
+        r"""Kafka information for data subscription.
         :rtype: :class:`tencentcloud.tcaplusdb.v20190823.models.KafkaInfo`
         """
         return self._KafkaInfo
@@ -1013,8 +991,7 @@ Note: this field may return `null`, indicating that no valid values can be obtai
 
     @property
     def TxhBackupExpireDay(self):
-        r"""The number of days after which the cluster Txh backup file will expire and be deleted.
-Note: This field may return `null`, indicating that no valid values can be obtained.
+        r"""Retention period for the Txh backup file of the cluster before expiration and deletion.
         :rtype: int
         """
         return self._TxhBackupExpireDay
@@ -1025,8 +1002,7 @@ Note: This field may return `null`, indicating that no valid values can be obtai
 
     @property
     def UlogBackupExpireDay(self):
-        r"""The number of days after which the cluster Ulog backup file will expire and be deleted.
-Note: This field may return `null`, indicating that no valid values can be obtained.
+        r"""Retention period for the Ulog backup file of the cluster before expiration and deletion.
         :rtype: int
         """
         return self._UlogBackupExpireDay
@@ -1037,8 +1013,7 @@ Note: This field may return `null`, indicating that no valid values can be obtai
 
     @property
     def IsReadOnlyUlogBackupExpireDay(self):
-        r"""Whether the expiration policy of cluster Ulog backup file is read-only. `0`: Yes; `1`: No.
-Note: This field may return `null`, indicating that no valid values can be obtained.
+        r"""Whether the expiration policy for the Ulog backup file of the cluster is read-only. 0: UlogBackupExpire is read-only and cannot be modified; 1: UlogBackupExpire can be modified.
         :rtype: int
         """
         return self._IsReadOnlyUlogBackupExpireDay
@@ -1049,8 +1024,7 @@ Note: This field may return `null`, indicating that no valid values can be obtai
 
     @property
     def RestProxyStatus(self):
-        r"""restproxy Status
-Note: This field may return null, indicating that no valid values can be obtained.
+        r"""restproxy status.
         :rtype: int
         """
         return self._RestProxyStatus
@@ -1059,6 +1033,28 @@ Note: This field may return null, indicating that no valid values can be obtaine
     def RestProxyStatus(self, RestProxyStatus):
         self._RestProxyStatus = RestProxyStatus
 
+    @property
+    def ShardTotalNum(self):
+        r"""Total number of shards in the cluster.
+        :rtype: int
+        """
+        return self._ShardTotalNum
+
+    @ShardTotalNum.setter
+    def ShardTotalNum(self, ShardTotalNum):
+        self._ShardTotalNum = ShardTotalNum
+
+    @property
+    def ShardUsedNum(self):
+        r"""Total number of used shards.
+        :rtype: int
+        """
+        return self._ShardUsedNum
+
+    @ShardUsedNum.setter
+    def ShardUsedNum(self, ShardUsedNum):
+        self._ShardUsedNum = ShardUsedNum
+
 
     def _deserialize(self, params):
         self._ClusterName = params.get("ClusterName")
@@ -1103,6 +1099,8 @@ Note: This field may return null, indicating that no valid values can be obtaine
         self._UlogBackupExpireDay = params.get("UlogBackupExpireDay")
         self._IsReadOnlyUlogBackupExpireDay = params.get("IsReadOnlyUlogBackupExpireDay")
         self._RestProxyStatus = params.get("RestProxyStatus")
+        self._ShardTotalNum = params.get("ShardTotalNum")
+        self._ShardUsedNum = params.get("ShardUsedNum")
         memeber_set = set(params.keys())
         for name, value in vars(self).items():
             property_name = name[1:]
@@ -5767,9 +5765,9 @@ class KafkaInfo(AbstractModel):
 
     def __init__(self):
         r"""
-        :param _Address: CKafka address
+        :param _Address: Kafka address
         :type Address: str
-        :param _Topic: CKafka topic
+        :param _Topic: Kafka topic
         :type Topic: str
         :param _User: CKafka username
         :type User: str
@@ -5789,7 +5787,7 @@ class KafkaInfo(AbstractModel):
 
     @property
     def Address(self):
-        r"""CKafka address
+        r"""Kafka address
         :rtype: str
         """
         return self._Address
@@ -5800,7 +5798,7 @@ class KafkaInfo(AbstractModel):
 
     @property
     def Topic(self):
-        r"""CKafka topic
+        r"""Kafka topic
         :rtype: str
         """
         return self._Topic
@@ -8183,8 +8181,7 @@ class ProxyDetailInfo(AbstractModel):
         :type AverageProcessDelay: int
         :param _SlowProcessSpeed: The speed of processing delayed request packets
         :type SlowProcessSpeed: int
-        :param _Version: Version
-Note: This field may return null, indicating that no valid values can be obtained.
+        :param _Version: Version.
         :type Version: str
         """
         self._ProxyUid = None
@@ -8251,8 +8248,7 @@ Note: This field may return null, indicating that no valid values can be obtaine
 
     @property
     def Version(self):
-        r"""Version
-Note: This field may return null, indicating that no valid values can be obtained.
+        r"""Version.
         :rtype: str
         """
         return self._Version
@@ -9092,8 +9088,7 @@ class ServerDetailInfo(AbstractModel):
         :type ReadNum: int
         :param _WriteNum: The number of writes
         :type WriteNum: int
-        :param _Version: Version
-Note: This field may return null, indicating that no valid values can be obtained.
+        :param _Version: Version.
         :type Version: str
         """
         self._ServerUid = None
@@ -9172,8 +9167,7 @@ Note: This field may return null, indicating that no valid values can be obtaine
 
     @property
     def Version(self):
-        r"""Version
-Note: This field may return null, indicating that no valid values can be obtained.
+        r"""Version.
         :rtype: str
         """
         return self._Version

{tencentcloud_sdk_python_intl_en-3.0.1280.dist-info → tencentcloud_sdk_python_intl_en-3.0.1282.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: tencentcloud-sdk-python-intl-en
-Version: 3.0.1280
+Version: 3.0.1282
 Summary: Tencent Cloud SDK for Python
 Home-page: https://github.com/TencentCloud/tencentcloud-sdk-python-intl-en
 Author: Tencent Cloud

{tencentcloud_sdk_python_intl_en-3.0.1280.dist-info → tencentcloud_sdk_python_intl_en-3.0.1282.dist-info}/RECORD

@@ -1,4 +1,4 @@
-tencentcloud/__init__.py,sha256=YwqZrJIeRM2uWKgrAiMrJuS_bWgGDSffBSpDcRVyREo,630
+tencentcloud/__init__.py,sha256=APNQsAwKY7QxDmeTKQpRUSb_UTDj5aydVbj_LfiF33U,630
 tencentcloud/advisor/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/advisor/v20200721/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/advisor/v20200721/advisor_client.py,sha256=PI6LX0PouoGb8e_ydQ9rATqY795jQh7JPK2COE_oH-Q,2899
@@ -309,7 +309,7 @@ tencentcloud/faceid/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSu
 tencentcloud/faceid/v20180301/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/faceid/v20180301/errorcodes.py,sha256=omuQa43ZPwrPDvFncq4YQvty93Odk96UdO0AeDV694I,10036
 tencentcloud/faceid/v20180301/faceid_client.py,sha256=bOnaaNx1TO0GRUG8HVo2PT1AvPkoViBVQUNkcGk7gSw,24125
-tencentcloud/faceid/v20180301/models.py,sha256=GOXUHCug95fMY8CaukIyf31GT2ZA6GkUumigINpbzOY,389496
+tencentcloud/faceid/v20180301/models.py,sha256=xNsAlrzrbVHFTLiDpioMjvhFvtMlgNEEWml7K_-WYhs,390825
 tencentcloud/gaap/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/gaap/v20180529/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/gaap/v20180529/errorcodes.py,sha256=mZT9m757HMuDMHkibCs0PWFE_VK9tryUOt7sCMwAi8U,11115
@@ -428,7 +428,7 @@ tencentcloud/monitor/v20180724/monitor_client.py,sha256=1fL7_-XV-jpyxmH5ibvE--Ep
 tencentcloud/mps/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/mps/v20190612/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/mps/v20190612/errorcodes.py,sha256=KRFJLNys_Tgj_5vUwZbVZGAj3XJJzq5M5CfkyHvTC5Y,15293
-tencentcloud/mps/v20190612/models.py,sha256=8sxi9R0OvVVJgh3WZJl0ux8QotyxcUbEEXMyTIP35n4,2079710
+tencentcloud/mps/v20190612/models.py,sha256=B_7vlBH6X8l8Jt4sSZA0x957ypCIDWDO4RJqKafzitg,2081015
 tencentcloud/mps/v20190612/mps_client.py,sha256=SZyBmd0TDJZN_A3lNdQG-IaqbDufE1slCctWP6bowYU,97491
 tencentcloud/msp/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/msp/v20180319/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
@@ -469,6 +469,11 @@ tencentcloud/pts/v20210728/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJ
 tencentcloud/pts/v20210728/errorcodes.py,sha256=39x7PEVbIOUWHxLXDdZOY7jAUdfGs2DRxZBHy7Vcr00,2253
 tencentcloud/pts/v20210728/models.py,sha256=3053CQ6soN4lyt7IEJeflxqhRvwkx1hwnyNKCZTw3fM,409123
 tencentcloud/pts/v20210728/pts_client.py,sha256=hzy4uKlbt13m9XX5fY1xAHVa69saLPwvNXAoxd1LJaI,44068
+tencentcloud/quota/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
+tencentcloud/quota/v20241204/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
+tencentcloud/quota/v20241204/errorcodes.py,sha256=ZasztYeoNpeGLP8OL1LDPRuXvtL0EpL5wV4cSrCOaG8,1187
+tencentcloud/quota/v20241204/models.py,sha256=KJobEMRpgk0FA769sy1Tr8niEgQd1kqXqYrJ9zW7mGw,5034
+tencentcloud/quota/v20241204/quota_client.py,sha256=zMONi78Kc3aCJK6OA1_uZ-89tiUzzTf5uSZq-QHHBGE,1818
 tencentcloud/rce/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/rce/v20201103/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/rce/v20201103/errorcodes.py,sha256=-rA5z1iTPCtgbH3isZetBCczbhBPAutWOZR59F6PoSU,4264
@@ -546,7 +551,7 @@ tencentcloud/tbaas/v20180416/tbaas_client.py,sha256=t1Kz-Hokmg3ipE4yFAauOJnzoldf
 tencentcloud/tcaplusdb/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/tcaplusdb/v20190823/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/tcaplusdb/v20190823/errorcodes.py,sha256=e0YaxfHNicVgBOwmGtUzqUPP0jnpDdVWMet90eBwzzA,3720
-tencentcloud/tcaplusdb/v20190823/models.py,sha256=xdeH3aOrTm4_zdLiJJNtcNZD_r9Lt3D4RXg6f5j9ss0,383968
+tencentcloud/tcaplusdb/v20190823/models.py,sha256=2ehKHFQJGXUl_GeoALcF5fQJVkZ-nOZFb6vtx10syNM,381930
 tencentcloud/tcaplusdb/v20190823/tcaplusdb_client.py,sha256=R9suvLOLKpuRpEmcKjkanycKaY19w8UmNigfvVzbnaI,50045
 tencentcloud/tchd/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 tencentcloud/tchd/v20230306/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
@@ -693,7 +698,7 @@ tencentcloud/yunjing/v20180228/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5
 tencentcloud/yunjing/v20180228/errorcodes.py,sha256=g2ac3Fxgbof23WWhGj9VxvuLJZNshnB0Mg7jWUzTh24,3168
 tencentcloud/yunjing/v20180228/models.py,sha256=nivJxxJYNvW-I_WWuoZj5RJaexdeSctX04e7osSjSUo,331388
 tencentcloud/yunjing/v20180228/yunjing_client.py,sha256=XYRY2x9Bs-06YaFx6swLlxuqhNRuykLZuIte6bc8T2E,67433
-tencentcloud_sdk_python_intl_en-3.0.1280.dist-info/METADATA,sha256=3N9arbZrb5eQxb-_v4oBjCTQqoMCf0tCMqUT1x9iaK0,1628
-tencentcloud_sdk_python_intl_en-3.0.1280.dist-info/WHEEL,sha256=z9j0xAa_JmUKMpmz72K0ZGALSM_n-wQVmGbleXx2VHg,110
-tencentcloud_sdk_python_intl_en-3.0.1280.dist-info/top_level.txt,sha256=g-8OyzoqI6O6LiS85zkeNzhB-osEnRIPZMdyRd_0eL0,13
-tencentcloud_sdk_python_intl_en-3.0.1280.dist-info/RECORD,,
+tencentcloud_sdk_python_intl_en-3.0.1282.dist-info/METADATA,sha256=iYo_YgyCBTytLeB7kx1JiJ3vPhqJTVXzbBaIhMZFWZw,1628
+tencentcloud_sdk_python_intl_en-3.0.1282.dist-info/WHEEL,sha256=z9j0xAa_JmUKMpmz72K0ZGALSM_n-wQVmGbleXx2VHg,110
+tencentcloud_sdk_python_intl_en-3.0.1282.dist-info/top_level.txt,sha256=g-8OyzoqI6O6LiS85zkeNzhB-osEnRIPZMdyRd_0eL0,13
+tencentcloud_sdk_python_intl_en-3.0.1282.dist-info/RECORD,,