swift 2.23.3__py3-none-any.whl → 2.35.0__py3-none-any.whl

swift/locale/zh_TW/LC_MESSAGES/swift.po

@@ -1,838 +0,0 @@
-# Translations template for swift.
-# Copyright (C) 2015 ORGANIZATION
-# This file is distributed under the same license as the swift project.
-#
-# Translators:
-# Andreas Jaeger <jaegerandi@gmail.com>, 2016. #zanata
-msgid ""
-msgstr ""
-"Project-Id-Version: swift VERSION\n"
-"Report-Msgid-Bugs-To: https://bugs.launchpad.net/openstack-i18n/\n"
-"POT-Creation-Date: 2019-10-03 19:48+0000\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"PO-Revision-Date: 2016-04-12 06:43+0000\n"
-"Last-Translator: Copied by Zanata <copied-by-zanata@zanata.org>\n"
-"Language: zh_TW\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"Generated-By: Babel 2.0\n"
-"X-Generator: Zanata 4.3.3\n"
-"Language-Team: Chinese (Taiwan)\n"
-
-msgid ""
-"\n"
-"user quit"
-msgstr ""
-"\n"
-"使用者退出"
-
-#, python-format
-msgid " - %s"
-msgstr " - %s"
-
-#, python-format
-msgid " - parallel, %s"
-msgstr " - 平行，%s"
-
-#, python-format
-msgid ""
-"%(checked)d suffixes checked - %(hashed).2f%% hashed, %(synced).2f%% synced"
-msgstr ""
-"已檢查 %(checked)d 個字尾 - %(hashed).2f%% 個已雜湊，%(synced).2f%% 個已同步"
-
-#, python-format
-msgid "%(msg)s %(ip)s:%(port)s/%(device)s"
-msgstr "%(msg)s %(ip)s:%(port)s/%(device)s"
-
-#, python-format
-msgid ""
-"%(replicated)d/%(total)d (%(percentage).2f%%) partitions replicated in "
-"%(time).2fs (%(rate).2f/sec, %(remaining)s remaining)"
-msgstr ""
-"已抄寫 %(replicated)d/%(total)d (%(percentage).2f%%) 個分割區（在 "
-"%(time).2fs 內，%(rate).2f/秒，剩餘 %(remaining)s）"
-
-#, python-format
-msgid "%(success)s successes, %(failure)s failures"
-msgstr "%(success)s 個成功，%(failure)s 個失敗"
-
-#, python-format
-msgid "%(type)s returning 503 for %(statuses)s"
-msgstr "%(type)s 針對 %(statuses)s 正在傳回 503"
-
-#, python-format
-msgid "%s already started..."
-msgstr "%s 已啟動..."
-
-#, python-format
-msgid "%s does not exist"
-msgstr "%s 不存在"
-
-#, python-format
-msgid "%s is not mounted"
-msgstr "未裝載 %s"
-
-#, python-format
-msgid "%s responded as unmounted"
-msgstr "%s 已回應為未裝載"
-
-#, python-format
-msgid "%s: Connection reset by peer"
-msgstr "%s：已由對等項目重設連線"
-
-msgid "Account"
-msgstr "帳戶"
-
-#, python-format
-msgid "Account audit \"once\" mode completed: %.02fs"
-msgstr "帳戶審核「一次性」模式已完成：%.02fs"
-
-#, python-format
-msgid "Account audit pass completed: %.02fs"
-msgstr "帳戶審核通過已完成：%.02fs"
-
-#, python-format
-msgid ""
-"Attempted to replicate %(count)d dbs in %(time).5f seconds (%(rate).5f/s)"
-msgstr "已嘗試在 %(time).5f 秒內抄寫 %(count)d 個資料庫 (%(rate).5f/s)"
-
-#, python-format
-msgid "Bad rsync return code: %(ret)d <- %(args)s"
-msgstr "不當的遠端同步回覆碼：%(ret)d <- %(args)s"
-
-msgid "Begin account audit \"once\" mode"
-msgstr "開始帳戶審核「一次性」模式"
-
-msgid "Begin account audit pass."
-msgstr "開始帳戶審核通過。"
-
-msgid "Begin container audit \"once\" mode"
-msgstr "開始儲存器審核「一次性」模式"
-
-msgid "Begin container audit pass."
-msgstr "開始儲存器審核通過。"
-
-msgid "Begin container sync \"once\" mode"
-msgstr "開始儲存器同步「一次性」模式"
-
-msgid "Begin container update single threaded sweep"
-msgstr "開始儲存器更新單一執行緒清理"
-
-msgid "Begin container update sweep"
-msgstr "開始儲存器更新清理"
-
-msgid "Begin object update single threaded sweep"
-msgstr "開始物件更新單一執行緒清理"
-
-msgid "Begin object update sweep"
-msgstr "開始物件更新清理"
-
-msgid "Beginning replication run"
-msgstr "正在開始抄寫執行"
-
-msgid "Broker error trying to rollback locked connection"
-msgstr "嘗試回復已鎖定的連線時發生分配管理系統錯誤"
-
-#, python-format
-msgid "Can not access the file %s."
-msgstr "無法存取檔案 %s。"
-
-#, python-format
-msgid "Can not load profile data from %s."
-msgstr "無法從 %s 中載入設定檔資料。"
-
-#, python-format
-msgid "Client did not read from proxy within %ss"
-msgstr "用戶端未在 %s 秒內從 Proxy 中讀取"
-
-msgid "Client disconnected on read"
-msgstr "用戶端在讀取時中斷連線"
-
-msgid "Client disconnected without sending enough data"
-msgstr "用戶端已中斷連線，未傳送足夠的資料"
-
-msgid "Client disconnected without sending last chunk"
-msgstr "用戶端已中斷連線，未傳送最後一個片段"
-
-#, python-format
-msgid ""
-"Client path %(client)s does not match path stored in object metadata %(meta)s"
-msgstr "用戶端路徑 %(client)s 不符合物件 meta 資料%(meta)s 中儲存的路徑"
-
-msgid ""
-"Configuration option internal_client_conf_path not defined. Using default "
-"configuration, See internal-client.conf-sample for options"
-msgstr ""
-"為定義配置選項 internal_client_conf_path。將使用預設配置，請參閱 internal-"
-"client.conf-sample 以取得選項"
-
-msgid "Connection refused"
-msgstr "連線遭拒"
-
-msgid "Connection timeout"
-msgstr "連線逾時"
-
-msgid "Container"
-msgstr "容器"
-
-#, python-format
-msgid "Container audit \"once\" mode completed: %.02fs"
-msgstr "儲存器審核「一次性」模式已完成：%.02fs"
-
-#, python-format
-msgid "Container audit pass completed: %.02fs"
-msgstr "儲存器審核通過已完成：%.02fs"
-
-#, python-format
-msgid "Container sync \"once\" mode completed: %.02fs"
-msgstr "儲存器同步「一次性」模式已完成：%.02fs"
-
-#, python-format
-msgid ""
-"Container update single threaded sweep completed: %(elapsed).02fs, "
-"%(success)s successes, %(fail)s failures, %(no_change)s with no changes"
-msgstr ""
-"儲存器更新單一執行緒清理已完成：%(elapsed).02fs，%(success)s 個成"
-"功，%(fail)s 個失敗，%(no_change)s 個無變更"
-
-#, python-format
-msgid "Container update sweep completed: %.02fs"
-msgstr "儲存器更新清理已完成：%.02fs"
-
-#, python-format
-msgid ""
-"Container update sweep of %(path)s completed: %(elapsed).02fs, %(success)s "
-"successes, %(fail)s failures, %(no_change)s with no changes"
-msgstr ""
-"%(path)s 的儲存器更新清理已完成：%(elapsed).02fs，%(success)s 個成"
-"功，%(fail)s 個失敗，%(no_change)s 個無變更"
-
-#, python-format
-msgid "Data download error: %s"
-msgstr "資料下載錯誤：%s"
-
-#, python-format
-msgid "ERROR %(db_file)s: %(validate_sync_to_err)s"
-msgstr "錯誤：%(db_file)s：%(validate_sync_to_err)s"
-
-#, python-format
-msgid "ERROR %(status)d %(body)s From %(type)s Server"
-msgstr "錯誤：%(status)d %(body)s 來自 %(type)s 伺服器"
-
-#, python-format
-msgid "ERROR %(status)d %(body)s From Object Server re: %(path)s"
-msgstr "錯誤：%(status)d %(body)s 來自物件伺服器 re：%(path)s"
-
-#, python-format
-msgid "ERROR %(status)d Expect: 100-continue From Object Server"
-msgstr "錯誤：%(status)d 預期：100 繼續自物件伺服器"
-
-#, python-format
-msgid ""
-"ERROR Account update failed with %(ip)s:%(port)s/%(device)s (will retry "
-"later): Response %(status)s %(reason)s"
-msgstr ""
-"錯誤：%(ip)s:%(port)s/%(device)s 的帳戶更新失敗（將稍後重試）：回應 "
-"%(status)s %(reason)s"
-
-#, python-format
-msgid "ERROR Client read timeout (%ss)"
-msgstr "錯誤：用戶端讀取逾時 (%ss)"
-
-#, python-format
-msgid ""
-"ERROR Container update failed (saving for async update later): %(status)d "
-"response from %(ip)s:%(port)s/%(dev)s"
-msgstr ""
-"錯誤：儲存器更新失敗（儲存以稍後進行非同步更新）：%(status)d回應（來自 "
-"%(ip)s:%(port)s/%(dev)s）"
-
-#, python-format
-msgid "ERROR Could not get account info %s"
-msgstr "錯誤：無法取得帳戶資訊 %s"
-
-#, python-format
-msgid "ERROR Could not get container info %s"
-msgstr "錯誤：無法取得儲存器資訊 %s"
-
-#, python-format
-msgid "ERROR DiskFile %(data_file)s close failure: %(exc)s : %(stack)s"
-msgstr "錯誤：磁碟檔 %(data_file)s 關閉失敗：%(exc)s：%(stack)s"
-
-msgid "ERROR Exception causing client disconnect"
-msgstr "錯誤：異常狀況造成用戶端中斷連線"
-
-#, python-format
-msgid "ERROR Exception transferring data to object servers %s"
-msgstr "錯誤：將資料轉送至物件伺服器 %s 時發生異常狀況"
-
-msgid "ERROR Failed to get my own IPs?"
-msgstr "錯誤：無法取得我自己的 IP？"
-
-msgid "ERROR Insufficient Storage"
-msgstr "錯誤：儲存體不足"
-
-#, python-format
-msgid "ERROR Object %(obj)s failed audit and was quarantined: %(err)s"
-msgstr "錯誤：物件 %(obj)s 審核失敗，已隔離：%(err)s"
-
-#, python-format
-msgid "ERROR Pickle problem, quarantining %s"
-msgstr "錯誤：挑選問題，正在隔離 %s"
-
-#, python-format
-msgid "ERROR Remote drive not mounted %s"
-msgstr "錯誤：未裝載遠端磁碟機 %s"
-
-#, python-format
-msgid "ERROR Syncing %(db_file)s %(row)s"
-msgstr "同步 %(db_file)s %(row)s 時發生錯誤"
-
-#, python-format
-msgid "ERROR Syncing %s"
-msgstr "同步 %s 時發生錯誤"
-
-#, python-format
-msgid "ERROR Trying to audit %s"
-msgstr "嘗試審核 %s 時發生錯誤"
-
-msgid "ERROR Unhandled exception in request"
-msgstr "錯誤：要求中有無法處理的異常狀況"
-
-#, python-format
-msgid "ERROR __call__ error with %(method)s %(path)s "
-msgstr "錯誤：%(method)s %(path)s 發生呼叫錯誤"
-
-#, python-format
-msgid ""
-"ERROR account update failed with %(ip)s:%(port)s/%(device)s (will retry "
-"later)"
-msgstr "錯誤：%(ip)s:%(port)s/%(device)s 的帳戶更新失敗（將稍後重試）"
-
-#, python-format
-msgid ""
-"ERROR account update failed with %(ip)s:%(port)s/%(device)s (will retry "
-"later): "
-msgstr "錯誤：%(ip)s:%(port)s/%(device)s 的帳戶更新失敗（將稍後重試）："
-
-#, python-format
-msgid "ERROR async pending file with unexpected name %s"
-msgstr "錯誤：具有非預期名稱 %s 的非同步擱置檔案"
-
-msgid "ERROR auditing"
-msgstr "審核時發生錯誤"
-
-#, python-format
-msgid "ERROR auditing: %s"
-msgstr "審核時發生錯誤：%s"
-
-#, python-format
-msgid ""
-"ERROR container update failed with %(ip)s:%(port)s/%(dev)s (saving for async "
-"update later)"
-msgstr ""
-"錯誤：%(ip)s:%(port)s/%(dev)s 的儲存器更新失敗（儲存以稍後進行非同步更新）"
-
-#, python-format
-msgid "ERROR reading HTTP response from %s"
-msgstr "從 %s 讀取 HTTP 回應時發生錯誤"
-
-#, python-format
-msgid "ERROR reading db %s"
-msgstr "讀取資料庫 %s 時發生錯誤"
-
-#, python-format
-msgid "ERROR rsync failed with %(code)s: %(args)s"
-msgstr "錯誤：遠端同步失敗，%(code)s：%(args)s"
-
-#, python-format
-msgid "ERROR syncing %(file)s with node %(node)s"
-msgstr "同步 %(file)s 與節點 %(node)s 時發生錯誤"
-
-msgid "ERROR trying to replicate"
-msgstr "嘗試抄寫時發生錯誤"
-
-#, python-format
-msgid "ERROR while trying to clean up %s"
-msgstr "嘗試清除 %s 時發生錯誤"
-
-#, python-format
-msgid "ERROR with %(type)s server %(ip)s:%(port)s/%(device)s re: %(info)s"
-msgstr "%(type)s 伺服器發生錯誤：%(ip)s:%(port)s/%(device)s re: %(info)s"
-
-#, python-format
-msgid "ERROR with loading suppressions from %s: "
-msgstr "從 %s 載入抑制時發生錯誤："
-
-#, python-format
-msgid "ERROR with remote server %(ip)s:%(port)s/%(device)s"
-msgstr "遠端伺服器發生錯誤：%(ip)s:%(port)s/%(device)s"
-
-#, python-format
-msgid "ERROR:  Failed to get paths to drive partitions: %s"
-msgstr "錯誤：無法取得磁碟機分割區的路徑：%s"
-
-#, python-format
-msgid "ERROR: Unable to access %(path)s: %(error)s"
-msgstr "錯誤：無法存取 %(path)s：%(error)s"
-
-#, python-format
-msgid "ERROR: Unable to run auditing: %s"
-msgstr "錯誤：無法執行審核：%s"
-
-msgid "Error hashing suffix"
-msgstr "混合字尾時發生錯誤"
-
-msgid "Error listing devices"
-msgstr "列出裝置時發生錯誤"
-
-#, python-format
-msgid "Error on render profiling results: %s"
-msgstr "呈現側寫結果時發生錯誤：%s"
-
-msgid "Error parsing recon cache file"
-msgstr "剖析 recon 快取檔案時發生錯誤"
-
-msgid "Error reading recon cache file"
-msgstr "讀取 recon 快取檔案時發生錯誤"
-
-msgid "Error reading ringfile"
-msgstr "讀取 ringfile 時發生錯誤"
-
-msgid "Error reading swift.conf"
-msgstr "讀取 swift.conf 時發生錯誤"
-
-msgid "Error retrieving recon data"
-msgstr "擷取 recon 資料時發生錯誤"
-
-msgid "Error syncing handoff partition"
-msgstr "同步遞交分割區時發生錯誤"
-
-msgid "Error syncing partition"
-msgstr "同步分割區時發生錯誤"
-
-#, python-format
-msgid "Error syncing with node: %s"
-msgstr "與節點同步時發生錯誤：%s"
-
-#, python-format
-msgid "Error trying to rebuild %(path)s policy#%(policy)d frag#%(frag_index)s"
-msgstr "嘗試重建 %(path)s 原則 #%(policy)d 分段 #%(frag_index)s 時發生錯誤"
-
-msgid "Error: An error occurred"
-msgstr "錯誤：發生錯誤"
-
-msgid "Error: missing config path argument"
-msgstr "錯誤：遺漏配置路徑引數"
-
-#, python-format
-msgid "Error: unable to locate %s"
-msgstr "錯誤：找不到 %s"
-
-#, python-format
-msgid "Exception with %(ip)s:%(port)s/%(device)s"
-msgstr "%(ip)s:%(port)s/%(device)s  發生異常狀況"
-
-#, python-format
-msgid "Expect: 100-continue on %s"
-msgstr "預期 100 - 在 %s 上繼續"
-
-#, python-format
-msgid "Following CNAME chain for  %(given_domain)s to %(found_domain)s"
-msgstr "遵循 %(given_domain)s 到 %(found_domain)s 的 CNAME 鏈"
-
-msgid "Found configs:"
-msgstr "找到配置："
-
-msgid ""
-"Handoffs first mode still has handoffs remaining.  Aborting current "
-"replication pass."
-msgstr "「遞交作業最先」模式仍有剩餘的遞交作業。正在中斷現行抄寫傳遞。"
-
-msgid "Host unreachable"
-msgstr "無法抵達主機"
-
-#, python-format
-msgid "Invalid X-Container-Sync-To format %r"
-msgstr "無效的 X-Container-Sync-To 格式 %r"
-
-#, python-format
-msgid "Invalid host %r in X-Container-Sync-To"
-msgstr "X-Container-Sync-To 中的主機 %r 無效"
-
-#, python-format
-msgid "Invalid pending entry %(file)s: %(entry)s"
-msgstr "無效的擱置項目 %(file)s：%(entry)s"
-
-#, python-format
-msgid "Invalid response %(resp)s from %(full_path)s"
-msgstr "來自 %(full_path)s 的回應 %(resp)s 無效"
-
-#, python-format
-msgid "Invalid response %(resp)s from %(ip)s"
-msgstr "來自 %(ip)s 的回應 %(resp)s 無效"
-
-#, python-format
-msgid ""
-"Invalid scheme %r in X-Container-Sync-To, must be \"//\", \"http\", or "
-"\"https\"."
-msgstr ""
-"X-Container-Sync-To 中的架構 %r 無效，必須是 \"//\"、\"http\" 或\"https\"。"
-
-#, python-format
-msgid "Killing long-running rsync: %s"
-msgstr "正在結束長時間執行的遠端同步：%s"
-
-msgid "Lockup detected.. killing live coros."
-msgstr "偵測到鎖定。正在結束即時 coro。"
-
-#, python-format
-msgid "Mapped %(given_domain)s to %(found_domain)s"
-msgstr "已將 %(given_domain)s 對映至 %(found_domain)s"
-
-#, python-format
-msgid "No %s running"
-msgstr "沒有 %s 在執行中"
-
-#, python-format
-msgid "No permission to signal PID %d"
-msgstr "沒有信號 PID %d 的許可權"
-
-#, python-format
-msgid "No policy with index %s"
-msgstr "沒有具有索引 %s 的原則"
-
-#, python-format
-msgid "No realm key for %r"
-msgstr "沒有 %r 的範圍金鑰"
-
-#, python-format
-msgid "Node error limited %(ip)s:%(port)s (%(device)s)"
-msgstr "節點錯誤限制 %(ip)s:%(port)s (%(device)s)"
-
-#, python-format
-msgid "Not enough object servers ack'ed (got %d)"
-msgstr "未確認足夠的物件伺服器（已取得 %d）"
-
-#, python-format
-msgid ""
-"Not found %(sync_from)r => %(sync_to)r                       - object "
-"%(obj_name)r"
-msgstr ""
-"找不到 %(sync_from)r => %(sync_to)r                       - 物件%(obj_name)r"
-
-#, python-format
-msgid "Nothing reconstructed for %s seconds."
-msgstr "%s 秒未重新建構任何內容。"
-
-#, python-format
-msgid "Nothing replicated for %s seconds."
-msgstr "未抄寫任何項目達 %s 秒。"
-
-msgid "Object"
-msgstr "物件"
-
-msgid "Object PUT"
-msgstr "物件 PUT"
-
-#, python-format
-msgid "Object PUT returning 202 for 409: %(req_timestamp)s <= %(timestamps)r"
-msgstr "物件 PUT 針對 409 正在傳回 202：%(req_timestamp)s <= %(timestamps)r"
-
-#, python-format
-msgid "Object PUT returning 412, %(statuses)r"
-msgstr "物件 PUT 正在傳回 412，%(statuses)r"
-
-#, python-format
-msgid ""
-"Object audit (%(type)s) \"%(mode)s\" mode completed: %(elapsed).02fs. Total "
-"quarantined: %(quars)d, Total errors: %(errors)d, Total files/sec: "
-"%(frate).2f, Total bytes/sec: %(brate).2f, Auditing time: %(audit).2f, Rate: "
-"%(audit_rate).2f"
-msgstr ""
-"物件審核 (%(type)s) \"%(mode)s\" 模式已完成：%(elapsed).02fs。已隔離總計："
-"%(quars)d，錯誤總計：%(errors)d，檔案/秒總計：%(frate).2f，位元組/秒總計："
-"%(brate).2f，審核時間：%(audit).2f，速率：%(audit_rate).2f"
-
-#, python-format
-msgid ""
-"Object audit (%(type)s). Since %(start_time)s: Locally: %(passes)d passed, "
-"%(quars)d quarantined, %(errors)d errors, files/sec: %(frate).2f, bytes/sec: "
-"%(brate).2f, Total time: %(total).2f, Auditing time: %(audit).2f, Rate: "
-"%(audit_rate).2f"
-msgstr ""
-"物件審核 (%(type)s)。自 %(start_time)s 以來：本端：%(passes)d 個已通"
-"過，%(quars)d 個已隔離，%(errors)d 個錯誤，檔案/秒：%(frate).2f，位元組數/"
-"秒：%(brate).2f，時間總計：%(total).2f，審核時間：%(audit).2f，速率："
-"%(audit_rate).2f"
-
-#, python-format
-msgid "Object audit stats: %s"
-msgstr "物件審核統計資料：%s"
-
-#, python-format
-msgid "Object reconstruction complete (once). (%.02f minutes)"
-msgstr "物件重新建構完成（一次性）。（%.02f 分鐘）"
-
-#, python-format
-msgid "Object reconstruction complete. (%.02f minutes)"
-msgstr "物件重新建構完成。（%.02f 分鐘）"
-
-#, python-format
-msgid "Object replication complete (once). (%.02f minutes)"
-msgstr "物件抄寫完成（一次性）。（%.02f 分鐘）"
-
-#, python-format
-msgid "Object replication complete. (%.02f minutes)"
-msgstr "物件抄寫完成。（%.02f 分鐘）"
-
-#, python-format
-msgid "Object servers returned %s mismatched etags"
-msgstr "物件伺服器已傳回 %s 個不符 etag"
-
-#, python-format
-msgid "Object update sweep completed: %.02fs"
-msgstr "物件更新清理已完成：%.02fs"
-
-msgid "Params, queries, and fragments not allowed in X-Container-Sync-To"
-msgstr "X-Container-Sync-To 中不容許參數、查詢及片段"
-
-#, python-format
-msgid "Partition times: max %(max).4fs, min %(min).4fs, med %(med).4fs"
-msgstr "分割區時間：最大 %(max).4fs，最小 %(min).4fs，中間 %(med).4fs"
-
-msgid "Path required in X-Container-Sync-To"
-msgstr "X-Container-Sync-To 中需要路徑"
-
-#, python-format
-msgid "Problem cleaning up %s"
-msgstr "清除 %s 時發生問題"
-
-#, python-format
-msgid "Profiling Error: %s"
-msgstr "側寫錯誤：%s"
-
-#, python-format
-msgid "Quarantined %(hsh_path)s to %(quar_path)s because it is not a directory"
-msgstr "已將 %(hsh_path)s 隔離至 %(quar_path)s，原因是它不是目錄"
-
-#, python-format
-msgid ""
-"Quarantined %(object_path)s to %(quar_path)s because it is not a directory"
-msgstr "已將 %(object_path)s 隔離至 %(quar_path)s，原因是它不是目錄"
-
-#, python-format
-msgid "Quarantining DB %s"
-msgstr "正在隔離資料庫 %s"
-
-#, python-format
-msgid "Ratelimit sleep log: %(sleep)s for %(account)s/%(container)s/%(object)s"
-msgstr "%(account)s/%(container)s/%(object)s 的 ratelimit 休眠日誌：%(sleep)s"
-
-#, python-format
-msgid "Removed %(remove)d dbs"
-msgstr "已移除 %(remove)d 個資料庫"
-
-#, python-format
-msgid "Removing %s objects"
-msgstr "正在移除 %s 物件"
-
-#, python-format
-msgid "Removing partition: %s"
-msgstr "正在移除分割區：%s"
-
-#, python-format
-msgid "Removing pid file %(pid_file)s with wrong pid %(pid)d"
-msgstr "正在移除具有錯誤 PID %(pid)d 的 PID 檔 %(pid_file)s"
-
-#, python-format
-msgid "Removing pid file %s with invalid pid"
-msgstr "正在移除具有無效 PID 的 PID 檔 %s"
-
-#, python-format
-msgid "Removing stale pid file %s"
-msgstr "正在移除過時 PID 檔案 %s"
-
-msgid "Replication run OVER"
-msgstr "抄寫執行結束"
-
-#, python-format
-msgid "Returning 497 because of blacklisting: %s"
-msgstr "由於黑名單，正在傳回 497：%s"
-
-#, python-format
-msgid ""
-"Returning 498 for %(meth)s to %(acc)s/%(cont)s/%(obj)s . Ratelimit (Max "
-"Sleep) %(e)s"
-msgstr ""
-"正在將 %(meth)s 的 498 傳回至 %(acc)s/%(cont)s/%(obj)s。Ratelimit（休眠上"
-"限）%(e)s"
-
-msgid "Ring change detected. Aborting current reconstruction pass."
-msgstr "偵測到環變更。正在中斷現行重新建構傳遞。"
-
-msgid "Ring change detected. Aborting current replication pass."
-msgstr "偵測到環變更。正在中斷現行抄寫傳遞。"
-
-#, python-format
-msgid "Running %s once"
-msgstr "正在執行 %s 一次"
-
-msgid "Running object reconstructor in script mode."
-msgstr "正在 Script 模式下執行物件重新建構器。"
-
-msgid "Running object replicator in script mode."
-msgstr "正在 Script 模式下執行物件抄寫器"
-
-#, python-format
-msgid ""
-"Since %(time)s: %(sync)s synced [%(delete)s deletes, %(put)s puts], %(skip)s "
-"skipped, %(fail)s failed"
-msgstr ""
-"自 %(time)s 以來：已同步 %(sync)s 個 [已刪除 [%(delete)s 個，已放置 %(put)s "
-"個]，已跳過 %(skip)s 個，%(fail)s 個失敗"
-
-#, python-format
-msgid ""
-"Since %(time)s: Account audits: %(passed)s passed audit,%(failed)s failed "
-"audit"
-msgstr ""
-"自 %(time)s 以來：帳戶審核：%(passed)s 個已通過審核，%(failed)s 個失敗審核"
-
-#, python-format
-msgid ""
-"Since %(time)s: Container audits: %(pass)s passed audit, %(fail)s failed "
-"audit"
-msgstr ""
-"自 %(time)s 以來：儲存器審核：%(pass)s 個已通過審核，%(fail)s 個失敗審核"
-
-#, python-format
-msgid "Skipping %s as it is not mounted"
-msgstr "正在跳過 %s，原因是它未裝載"
-
-#, python-format
-msgid "Starting %s"
-msgstr "正在啟動 %s"
-
-msgid "Starting object reconstruction pass."
-msgstr "正在啟動物件重新建構傳遞。"
-
-msgid "Starting object reconstructor in daemon mode."
-msgstr "正在常駐程式模式下啟動物件重新建構器。"
-
-msgid "Starting object replication pass."
-msgstr "正在啟動物件抄寫傳遞。"
-
-msgid "Starting object replicator in daemon mode."
-msgstr "正在常駐程式模式下啟動物件抄寫器。"
-
-#, python-format
-msgid "Successful rsync of %(src)s at %(dst)s (%(time).03f)"
-msgstr "已順利遠端同步 %(dst)s 中的 %(src)s (%(time).03f)"
-
-msgid "The file type are forbidden to access!"
-msgstr "此檔案類型禁止存取！"
-
-#, python-format
-msgid ""
-"The total %(key)s for the container (%(total)s) does not match the sum of "
-"%(key)s across policies (%(sum)s)"
-msgstr ""
-"儲存器的 %(key)s 總計 (%(total)s) 不符合原則中的 %(key)s 總和 (%(sum)s) "
-
-#, python-format
-msgid "Trying to %(method)s %(path)s"
-msgstr "正在嘗試 %(method)s %(path)s"
-
-#, python-format
-msgid "Trying to GET %(full_path)s"
-msgstr "正在嘗試對 %(full_path)s 執行 GET 動作"
-
-msgid "Trying to read during GET"
-msgstr "正在嘗試於 GET 期間讀取"
-
-msgid "Trying to send to client"
-msgstr "正在嘗試傳送至用戶端"
-
-#, python-format
-msgid "Trying to sync suffixes with %s"
-msgstr "正在嘗試與 %s 同步字尾"
-
-#, python-format
-msgid "Trying to write to %s"
-msgstr "正在嘗試寫入至 %s"
-
-msgid "UNCAUGHT EXCEPTION"
-msgstr "未捕捉的異常狀況"
-
-#, python-format
-msgid "Unable to locate %s in libc.  Leaving as a no-op."
-msgstr "在 libc 中找不到 %s。保留為 no-op。"
-
-#, python-format
-msgid "Unable to locate config for %s"
-msgstr "找不到 %s 的配置"
-
-msgid ""
-"Unable to locate fallocate, posix_fallocate in libc.  Leaving as a no-op."
-msgstr "在 libc 中找不到 fallocate、posix_fallocate。保留為 no-op。"
-
-#, python-format
-msgid "Unable to read config from %s"
-msgstr "無法從 %s 讀取配置"
-
-#, python-format
-msgid "Unauth %(sync_from)r => %(sync_to)r"
-msgstr "未鑑別 %(sync_from)r => %(sync_to)r"
-
-msgid "Unhandled exception"
-msgstr "無法處理的異常狀況"
-
-#, python-format
-msgid "Unknown exception trying to GET: %(account)r %(container)r %(object)r"
-msgstr ""
-"嘗試執行 GET 動作時發生不明異常狀況：%(account)r %(container)r %(object)r"
-
-#, python-format
-msgid "Update report failed for %(container)s %(dbfile)s"
-msgstr "%(container)s %(dbfile)s 的更新報告失敗"
-
-#, python-format
-msgid "Update report sent for %(container)s %(dbfile)s"
-msgstr "已傳送 %(container)s %(dbfile)s 的更新報告"
-
-msgid ""
-"WARNING: SSL should only be enabled for testing purposes. Use external SSL "
-"termination for a production deployment."
-msgstr ""
-"警告：應該僅啟用 SSL 以用於測試目的。使用外部SSL 終止以進行正式作業部署。"
-
-msgid "WARNING: Unable to modify file descriptor limit.  Running as non-root?"
-msgstr "警告：無法修改檔案描述子限制。以非 root 使用者身分執行？"
-
-msgid "WARNING: Unable to modify max process limit.  Running as non-root?"
-msgstr "警告：無法修改處理程序數上限限制。以非 root 使用者身分執行？"
-
-msgid "WARNING: Unable to modify memory limit.  Running as non-root?"
-msgstr "警告：無法修改記憶體限制。以非 root 使用者身分執行？"
-
-msgid "Warning: Cannot ratelimit without a memcached client"
-msgstr "警告：無法在沒有 memcached 用戶端的情況下限制速率"
-
-#, python-format
-msgid "method %s is not allowed."
-msgstr "不容許方法 %s。"
-
-msgid "no log file found"
-msgstr "找不到日誌檔"
-
-msgid "odfpy not installed."
-msgstr "未安裝 odfpy。"
-
-#, python-format
-msgid "plotting results failed due to %s"
-msgstr "由於 %s，繪製結果失敗"
-
-msgid "python-matplotlib not installed."
-msgstr "未安裝 python-matplotlib。"