slidge-whatsapp 0.2.5__cp311-cp311-manylinux_2_36_aarch64.whl → 0.3.0__cp311-cp311-manylinux_2_36_aarch64.whl

slidge_whatsapp/vendor/golang.org/x/net/http2/errors.go

@@ -0,0 +1,145 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"errors"
+	"fmt"
+)
+
+// An ErrCode is an unsigned 32-bit error code as defined in the HTTP/2 spec.
+type ErrCode uint32
+
+const (
+	ErrCodeNo                 ErrCode = 0x0
+	ErrCodeProtocol           ErrCode = 0x1
+	ErrCodeInternal           ErrCode = 0x2
+	ErrCodeFlowControl        ErrCode = 0x3
+	ErrCodeSettingsTimeout    ErrCode = 0x4
+	ErrCodeStreamClosed       ErrCode = 0x5
+	ErrCodeFrameSize          ErrCode = 0x6
+	ErrCodeRefusedStream      ErrCode = 0x7
+	ErrCodeCancel             ErrCode = 0x8
+	ErrCodeCompression        ErrCode = 0x9
+	ErrCodeConnect            ErrCode = 0xa
+	ErrCodeEnhanceYourCalm    ErrCode = 0xb
+	ErrCodeInadequateSecurity ErrCode = 0xc
+	ErrCodeHTTP11Required     ErrCode = 0xd
+)
+
+var errCodeName = map[ErrCode]string{
+	ErrCodeNo:                 "NO_ERROR",
+	ErrCodeProtocol:           "PROTOCOL_ERROR",
+	ErrCodeInternal:           "INTERNAL_ERROR",
+	ErrCodeFlowControl:        "FLOW_CONTROL_ERROR",
+	ErrCodeSettingsTimeout:    "SETTINGS_TIMEOUT",
+	ErrCodeStreamClosed:       "STREAM_CLOSED",
+	ErrCodeFrameSize:          "FRAME_SIZE_ERROR",
+	ErrCodeRefusedStream:      "REFUSED_STREAM",
+	ErrCodeCancel:             "CANCEL",
+	ErrCodeCompression:        "COMPRESSION_ERROR",
+	ErrCodeConnect:            "CONNECT_ERROR",
+	ErrCodeEnhanceYourCalm:    "ENHANCE_YOUR_CALM",
+	ErrCodeInadequateSecurity: "INADEQUATE_SECURITY",
+	ErrCodeHTTP11Required:     "HTTP_1_1_REQUIRED",
+}
+
+func (e ErrCode) String() string {
+	if s, ok := errCodeName[e]; ok {
+		return s
+	}
+	return fmt.Sprintf("unknown error code 0x%x", uint32(e))
+}
+
+func (e ErrCode) stringToken() string {
+	if s, ok := errCodeName[e]; ok {
+		return s
+	}
+	return fmt.Sprintf("ERR_UNKNOWN_%d", uint32(e))
+}
+
+// ConnectionError is an error that results in the termination of the
+// entire connection.
+type ConnectionError ErrCode
+
+func (e ConnectionError) Error() string { return fmt.Sprintf("connection error: %s", ErrCode(e)) }
+
+// StreamError is an error that only affects one stream within an
+// HTTP/2 connection.
+type StreamError struct {
+	StreamID uint32
+	Code     ErrCode
+	Cause    error // optional additional detail
+}
+
+// errFromPeer is a sentinel error value for StreamError.Cause to
+// indicate that the StreamError was sent from the peer over the wire
+// and wasn't locally generated in the Transport.
+var errFromPeer = errors.New("received from peer")
+
+func streamError(id uint32, code ErrCode) StreamError {
+	return StreamError{StreamID: id, Code: code}
+}
+
+func (e StreamError) Error() string {
+	if e.Cause != nil {
+		return fmt.Sprintf("stream error: stream ID %d; %v; %v", e.StreamID, e.Code, e.Cause)
+	}
+	return fmt.Sprintf("stream error: stream ID %d; %v", e.StreamID, e.Code)
+}
+
+// 6.9.1 The Flow Control Window
+// "If a sender receives a WINDOW_UPDATE that causes a flow control
+// window to exceed this maximum it MUST terminate either the stream
+// or the connection, as appropriate. For streams, [...]; for the
+// connection, a GOAWAY frame with a FLOW_CONTROL_ERROR code."
+type goAwayFlowError struct{}
+
+func (goAwayFlowError) Error() string { return "connection exceeded flow control window size" }
+
+// connError represents an HTTP/2 ConnectionError error code, along
+// with a string (for debugging) explaining why.
+//
+// Errors of this type are only returned by the frame parser functions
+// and converted into ConnectionError(Code), after stashing away
+// the Reason into the Framer's errDetail field, accessible via
+// the (*Framer).ErrorDetail method.
+type connError struct {
+	Code   ErrCode // the ConnectionError error code
+	Reason string  // additional reason
+}
+
+func (e connError) Error() string {
+	return fmt.Sprintf("http2: connection error: %v: %v", e.Code, e.Reason)
+}
+
+type pseudoHeaderError string
+
+func (e pseudoHeaderError) Error() string {
+	return fmt.Sprintf("invalid pseudo-header %q", string(e))
+}
+
+type duplicatePseudoHeaderError string
+
+func (e duplicatePseudoHeaderError) Error() string {
+	return fmt.Sprintf("duplicate pseudo-header %q", string(e))
+}
+
+type headerFieldNameError string
+
+func (e headerFieldNameError) Error() string {
+	return fmt.Sprintf("invalid header field name %q", string(e))
+}
+
+type headerFieldValueError string
+
+func (e headerFieldValueError) Error() string {
+	return fmt.Sprintf("invalid header field value for %q", string(e))
+}
+
+var (
+	errMixPseudoHeaderTypes = errors.New("mix of request and response pseudo headers")
+	errPseudoAfterRegular   = errors.New("pseudo header field after regular")
+)

slidge_whatsapp/vendor/golang.org/x/net/http2/flow.go

@@ -0,0 +1,120 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Flow control
+
+package http2
+
+// inflowMinRefresh is the minimum number of bytes we'll send for a
+// flow control window update.
+const inflowMinRefresh = 4 << 10
+
+// inflow accounts for an inbound flow control window.
+// It tracks both the latest window sent to the peer (used for enforcement)
+// and the accumulated unsent window.
+type inflow struct {
+	avail  int32
+	unsent int32
+}
+
+// init sets the initial window.
+func (f *inflow) init(n int32) {
+	f.avail = n
+}
+
+// add adds n bytes to the window, with a maximum window size of max,
+// indicating that the peer can now send us more data.
+// For example, the user read from a {Request,Response} body and consumed
+// some of the buffered data, so the peer can now send more.
+// It returns the number of bytes to send in a WINDOW_UPDATE frame to the peer.
+// Window updates are accumulated and sent when the unsent capacity
+// is at least inflowMinRefresh or will at least double the peer's available window.
+func (f *inflow) add(n int) (connAdd int32) {
+	if n < 0 {
+		panic("negative update")
+	}
+	unsent := int64(f.unsent) + int64(n)
+	// "A sender MUST NOT allow a flow-control window to exceed 2^31-1 octets."
+	// RFC 7540 Section 6.9.1.
+	const maxWindow = 1<<31 - 1
+	if unsent+int64(f.avail) > maxWindow {
+		panic("flow control update exceeds maximum window size")
+	}
+	f.unsent = int32(unsent)
+	if f.unsent < inflowMinRefresh && f.unsent < f.avail {
+		// If there aren't at least inflowMinRefresh bytes of window to send,
+		// and this update won't at least double the window, buffer the update for later.
+		return 0
+	}
+	f.avail += f.unsent
+	f.unsent = 0
+	return int32(unsent)
+}
+
+// take attempts to take n bytes from the peer's flow control window.
+// It reports whether the window has available capacity.
+func (f *inflow) take(n uint32) bool {
+	if n > uint32(f.avail) {
+		return false
+	}
+	f.avail -= int32(n)
+	return true
+}
+
+// takeInflows attempts to take n bytes from two inflows,
+// typically connection-level and stream-level flows.
+// It reports whether both windows have available capacity.
+func takeInflows(f1, f2 *inflow, n uint32) bool {
+	if n > uint32(f1.avail) || n > uint32(f2.avail) {
+		return false
+	}
+	f1.avail -= int32(n)
+	f2.avail -= int32(n)
+	return true
+}
+
+// outflow is the outbound flow control window's size.
+type outflow struct {
+	_ incomparable
+
+	// n is the number of DATA bytes we're allowed to send.
+	// An outflow is kept both on a conn and a per-stream.
+	n int32
+
+	// conn points to the shared connection-level outflow that is
+	// shared by all streams on that conn. It is nil for the outflow
+	// that's on the conn directly.
+	conn *outflow
+}
+
+func (f *outflow) setConnFlow(cf *outflow) { f.conn = cf }
+
+func (f *outflow) available() int32 {
+	n := f.n
+	if f.conn != nil && f.conn.n < n {
+		n = f.conn.n
+	}
+	return n
+}
+
+func (f *outflow) take(n int32) {
+	if n > f.available() {
+		panic("internal error: took too much")
+	}
+	f.n -= n
+	if f.conn != nil {
+		f.conn.n -= n
+	}
+}
+
+// add adds n bytes (positive or negative) to the flow control window.
+// It returns false if the sum would exceed 2^31-1.
+func (f *outflow) add(n int32) bool {
+	sum := f.n + n
+	if (sum > n) == (f.n > 0) {
+		f.n = sum
+		return true
+	}
+	return false
+}