slidge-whatsapp 0.2.2__cp312-cp312-manylinux_2_36_aarch64.whl → 0.2.6__cp312-cp312-manylinux_2_36_aarch64.whl

slidge_whatsapp/vendor/golang.org/x/net/http2/http2.go

@@ -0,0 +1,432 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package http2 implements the HTTP/2 protocol.
+//
+// This package is low-level and intended to be used directly by very
+// few people. Most users will use it indirectly through the automatic
+// use by the net/http package (from Go 1.6 and later).
+// For use in earlier Go versions see ConfigureServer. (Transport support
+// requires Go 1.6 or later)
+//
+// See https://http2.github.io/ for more information on HTTP/2.
+//
+// See https://http2.golang.org/ for a test server running this code.
+package http2 // import "golang.org/x/net/http2"
+
+import (
+	"bufio"
+	"context"
+	"crypto/tls"
+	"errors"
+	"fmt"
+	"net"
+	"net/http"
+	"os"
+	"sort"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"golang.org/x/net/http/httpguts"
+)
+
+var (
+	VerboseLogs    bool
+	logFrameWrites bool
+	logFrameReads  bool
+	inTests        bool
+
+	// Enabling extended CONNECT by causes browsers to attempt to use
+	// WebSockets-over-HTTP/2. This results in problems when the server's websocket
+	// package doesn't support extended CONNECT.
+	//
+	// Disable extended CONNECT by default for now.
+	//
+	// Issue #71128.
+	disableExtendedConnectProtocol = true
+)
+
+func init() {
+	e := os.Getenv("GODEBUG")
+	if strings.Contains(e, "http2debug=1") {
+		VerboseLogs = true
+	}
+	if strings.Contains(e, "http2debug=2") {
+		VerboseLogs = true
+		logFrameWrites = true
+		logFrameReads = true
+	}
+	if strings.Contains(e, "http2xconnect=1") {
+		disableExtendedConnectProtocol = false
+	}
+}
+
+const (
+	// ClientPreface is the string that must be sent by new
+	// connections from clients.
+	ClientPreface = "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n"
+
+	// SETTINGS_MAX_FRAME_SIZE default
+	// https://httpwg.org/specs/rfc7540.html#rfc.section.6.5.2
+	initialMaxFrameSize = 16384
+
+	// NextProtoTLS is the NPN/ALPN protocol negotiated during
+	// HTTP/2's TLS setup.
+	NextProtoTLS = "h2"
+
+	// https://httpwg.org/specs/rfc7540.html#SettingValues
+	initialHeaderTableSize = 4096
+
+	initialWindowSize = 65535 // 6.9.2 Initial Flow Control Window Size
+
+	defaultMaxReadFrameSize = 1 << 20
+)
+
+var (
+	clientPreface = []byte(ClientPreface)
+)
+
+type streamState int
+
+// HTTP/2 stream states.
+//
+// See http://tools.ietf.org/html/rfc7540#section-5.1.
+//
+// For simplicity, the server code merges "reserved (local)" into
+// "half-closed (remote)". This is one less state transition to track.
+// The only downside is that we send PUSH_PROMISEs slightly less
+// liberally than allowable. More discussion here:
+// https://lists.w3.org/Archives/Public/ietf-http-wg/2016JulSep/0599.html
+//
+// "reserved (remote)" is omitted since the client code does not
+// support server push.
+const (
+	stateIdle streamState = iota
+	stateOpen
+	stateHalfClosedLocal
+	stateHalfClosedRemote
+	stateClosed
+)
+
+var stateName = [...]string{
+	stateIdle:             "Idle",
+	stateOpen:             "Open",
+	stateHalfClosedLocal:  "HalfClosedLocal",
+	stateHalfClosedRemote: "HalfClosedRemote",
+	stateClosed:           "Closed",
+}
+
+func (st streamState) String() string {
+	return stateName[st]
+}
+
+// Setting is a setting parameter: which setting it is, and its value.
+type Setting struct {
+	// ID is which setting is being set.
+	// See https://httpwg.org/specs/rfc7540.html#SettingFormat
+	ID SettingID
+
+	// Val is the value.
+	Val uint32
+}
+
+func (s Setting) String() string {
+	return fmt.Sprintf("[%v = %d]", s.ID, s.Val)
+}
+
+// Valid reports whether the setting is valid.
+func (s Setting) Valid() error {
+	// Limits and error codes from 6.5.2 Defined SETTINGS Parameters
+	switch s.ID {
+	case SettingEnablePush:
+		if s.Val != 1 && s.Val != 0 {
+			return ConnectionError(ErrCodeProtocol)
+		}
+	case SettingInitialWindowSize:
+		if s.Val > 1<<31-1 {
+			return ConnectionError(ErrCodeFlowControl)
+		}
+	case SettingMaxFrameSize:
+		if s.Val < 16384 || s.Val > 1<<24-1 {
+			return ConnectionError(ErrCodeProtocol)
+		}
+	case SettingEnableConnectProtocol:
+		if s.Val != 1 && s.Val != 0 {
+			return ConnectionError(ErrCodeProtocol)
+		}
+	}
+	return nil
+}
+
+// A SettingID is an HTTP/2 setting as defined in
+// https://httpwg.org/specs/rfc7540.html#iana-settings
+type SettingID uint16
+
+const (
+	SettingHeaderTableSize       SettingID = 0x1
+	SettingEnablePush            SettingID = 0x2
+	SettingMaxConcurrentStreams  SettingID = 0x3
+	SettingInitialWindowSize     SettingID = 0x4
+	SettingMaxFrameSize          SettingID = 0x5
+	SettingMaxHeaderListSize     SettingID = 0x6
+	SettingEnableConnectProtocol SettingID = 0x8
+)
+
+var settingName = map[SettingID]string{
+	SettingHeaderTableSize:       "HEADER_TABLE_SIZE",
+	SettingEnablePush:            "ENABLE_PUSH",
+	SettingMaxConcurrentStreams:  "MAX_CONCURRENT_STREAMS",
+	SettingInitialWindowSize:     "INITIAL_WINDOW_SIZE",
+	SettingMaxFrameSize:          "MAX_FRAME_SIZE",
+	SettingMaxHeaderListSize:     "MAX_HEADER_LIST_SIZE",
+	SettingEnableConnectProtocol: "ENABLE_CONNECT_PROTOCOL",
+}
+
+func (s SettingID) String() string {
+	if v, ok := settingName[s]; ok {
+		return v
+	}
+	return fmt.Sprintf("UNKNOWN_SETTING_%d", uint16(s))
+}
+
+// validWireHeaderFieldName reports whether v is a valid header field
+// name (key). See httpguts.ValidHeaderName for the base rules.
+//
+// Further, http2 says:
+//
+//	"Just as in HTTP/1.x, header field names are strings of ASCII
+//	characters that are compared in a case-insensitive
+//	fashion. However, header field names MUST be converted to
+//	lowercase prior to their encoding in HTTP/2. "
+func validWireHeaderFieldName(v string) bool {
+	if len(v) == 0 {
+		return false
+	}
+	for _, r := range v {
+		if !httpguts.IsTokenRune(r) {
+			return false
+		}
+		if 'A' <= r && r <= 'Z' {
+			return false
+		}
+	}
+	return true
+}
+
+func httpCodeString(code int) string {
+	switch code {
+	case 200:
+		return "200"
+	case 404:
+		return "404"
+	}
+	return strconv.Itoa(code)
+}
+
+// from pkg io
+type stringWriter interface {
+	WriteString(s string) (n int, err error)
+}
+
+// A closeWaiter is like a sync.WaitGroup but only goes 1 to 0 (open to closed).
+type closeWaiter chan struct{}
+
+// Init makes a closeWaiter usable.
+// It exists because so a closeWaiter value can be placed inside a
+// larger struct and have the Mutex and Cond's memory in the same
+// allocation.
+func (cw *closeWaiter) Init() {
+	*cw = make(chan struct{})
+}
+
+// Close marks the closeWaiter as closed and unblocks any waiters.
+func (cw closeWaiter) Close() {
+	close(cw)
+}
+
+// Wait waits for the closeWaiter to become closed.
+func (cw closeWaiter) Wait() {
+	<-cw
+}
+
+// bufferedWriter is a buffered writer that writes to w.
+// Its buffered writer is lazily allocated as needed, to minimize
+// idle memory usage with many connections.
+type bufferedWriter struct {
+	_           incomparable
+	group       synctestGroupInterface // immutable
+	conn        net.Conn               // immutable
+	bw          *bufio.Writer          // non-nil when data is buffered
+	byteTimeout time.Duration          // immutable, WriteByteTimeout
+}
+
+func newBufferedWriter(group synctestGroupInterface, conn net.Conn, timeout time.Duration) *bufferedWriter {
+	return &bufferedWriter{
+		group:       group,
+		conn:        conn,
+		byteTimeout: timeout,
+	}
+}
+
+// bufWriterPoolBufferSize is the size of bufio.Writer's
+// buffers created using bufWriterPool.
+//
+// TODO: pick a less arbitrary value? this is a bit under
+// (3 x typical 1500 byte MTU) at least. Other than that,
+// not much thought went into it.
+const bufWriterPoolBufferSize = 4 << 10
+
+var bufWriterPool = sync.Pool{
+	New: func() interface{} {
+		return bufio.NewWriterSize(nil, bufWriterPoolBufferSize)
+	},
+}
+
+func (w *bufferedWriter) Available() int {
+	if w.bw == nil {
+		return bufWriterPoolBufferSize
+	}
+	return w.bw.Available()
+}
+
+func (w *bufferedWriter) Write(p []byte) (n int, err error) {
+	if w.bw == nil {
+		bw := bufWriterPool.Get().(*bufio.Writer)
+		bw.Reset((*bufferedWriterTimeoutWriter)(w))
+		w.bw = bw
+	}
+	return w.bw.Write(p)
+}
+
+func (w *bufferedWriter) Flush() error {
+	bw := w.bw
+	if bw == nil {
+		return nil
+	}
+	err := bw.Flush()
+	bw.Reset(nil)
+	bufWriterPool.Put(bw)
+	w.bw = nil
+	return err
+}
+
+type bufferedWriterTimeoutWriter bufferedWriter
+
+func (w *bufferedWriterTimeoutWriter) Write(p []byte) (n int, err error) {
+	return writeWithByteTimeout(w.group, w.conn, w.byteTimeout, p)
+}
+
+// writeWithByteTimeout writes to conn.
+// If more than timeout passes without any bytes being written to the connection,
+// the write fails.
+func writeWithByteTimeout(group synctestGroupInterface, conn net.Conn, timeout time.Duration, p []byte) (n int, err error) {
+	if timeout <= 0 {
+		return conn.Write(p)
+	}
+	for {
+		var now time.Time
+		if group == nil {
+			now = time.Now()
+		} else {
+			now = group.Now()
+		}
+		conn.SetWriteDeadline(now.Add(timeout))
+		nn, err := conn.Write(p[n:])
+		n += nn
+		if n == len(p) || nn == 0 || !errors.Is(err, os.ErrDeadlineExceeded) {
+			// Either we finished the write, made no progress, or hit the deadline.
+			// Whichever it is, we're done now.
+			conn.SetWriteDeadline(time.Time{})
+			return n, err
+		}
+	}
+}
+
+func mustUint31(v int32) uint32 {
+	if v < 0 || v > 2147483647 {
+		panic("out of range")
+	}
+	return uint32(v)
+}
+
+// bodyAllowedForStatus reports whether a given response status code
+// permits a body. See RFC 7230, section 3.3.
+func bodyAllowedForStatus(status int) bool {
+	switch {
+	case status >= 100 && status <= 199:
+		return false
+	case status == 204:
+		return false
+	case status == 304:
+		return false
+	}
+	return true
+}
+
+type httpError struct {
+	_       incomparable
+	msg     string
+	timeout bool
+}
+
+func (e *httpError) Error() string   { return e.msg }
+func (e *httpError) Timeout() bool   { return e.timeout }
+func (e *httpError) Temporary() bool { return true }
+
+var errTimeout error = &httpError{msg: "http2: timeout awaiting response headers", timeout: true}
+
+type connectionStater interface {
+	ConnectionState() tls.ConnectionState
+}
+
+var sorterPool = sync.Pool{New: func() interface{} { return new(sorter) }}
+
+type sorter struct {
+	v []string // owned by sorter
+}
+
+func (s *sorter) Len() int           { return len(s.v) }
+func (s *sorter) Swap(i, j int)      { s.v[i], s.v[j] = s.v[j], s.v[i] }
+func (s *sorter) Less(i, j int) bool { return s.v[i] < s.v[j] }
+
+// Keys returns the sorted keys of h.
+//
+// The returned slice is only valid until s used again or returned to
+// its pool.
+func (s *sorter) Keys(h http.Header) []string {
+	keys := s.v[:0]
+	for k := range h {
+		keys = append(keys, k)
+	}
+	s.v = keys
+	sort.Sort(s)
+	return keys
+}
+
+func (s *sorter) SortStrings(ss []string) {
+	// Our sorter works on s.v, which sorter owns, so
+	// stash it away while we sort the user's buffer.
+	save := s.v
+	s.v = ss
+	sort.Sort(s)
+	s.v = save
+}
+
+// incomparable is a zero-width, non-comparable type. Adding it to a struct
+// makes that struct also non-comparable, and generally doesn't add
+// any size (as long as it's first).
+type incomparable [0]func()
+
+// synctestGroupInterface is the methods of synctestGroup used by Server and Transport.
+// It's defined as an interface here to let us keep synctestGroup entirely test-only
+// and not a part of non-test builds.
+type synctestGroupInterface interface {
+	Join()
+	Now() time.Time
+	NewTimer(d time.Duration) timer
+	AfterFunc(d time.Duration, f func()) timer
+	ContextWithTimeout(ctx context.Context, d time.Duration) (context.Context, context.CancelFunc)
+}

slidge_whatsapp/vendor/golang.org/x/net/http2/pipe.go

@@ -0,0 +1,184 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package http2
+
+import (
+	"errors"
+	"io"
+	"sync"
+)
+
+// pipe is a goroutine-safe io.Reader/io.Writer pair. It's like
+// io.Pipe except there are no PipeReader/PipeWriter halves, and the
+// underlying buffer is an interface. (io.Pipe is always unbuffered)
+type pipe struct {
+	mu       sync.Mutex
+	c        sync.Cond     // c.L lazily initialized to &p.mu
+	b        pipeBuffer    // nil when done reading
+	unread   int           // bytes unread when done
+	err      error         // read error once empty. non-nil means closed.
+	breakErr error         // immediate read error (caller doesn't see rest of b)
+	donec    chan struct{} // closed on error
+	readFn   func()        // optional code to run in Read before error
+}
+
+type pipeBuffer interface {
+	Len() int
+	io.Writer
+	io.Reader
+}
+
+// setBuffer initializes the pipe buffer.
+// It has no effect if the pipe is already closed.
+func (p *pipe) setBuffer(b pipeBuffer) {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.err != nil || p.breakErr != nil {
+		return
+	}
+	p.b = b
+}
+
+func (p *pipe) Len() int {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.b == nil {
+		return p.unread
+	}
+	return p.b.Len()
+}
+
+// Read waits until data is available and copies bytes
+// from the buffer into p.
+func (p *pipe) Read(d []byte) (n int, err error) {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.c.L == nil {
+		p.c.L = &p.mu
+	}
+	for {
+		if p.breakErr != nil {
+			return 0, p.breakErr
+		}
+		if p.b != nil && p.b.Len() > 0 {
+			return p.b.Read(d)
+		}
+		if p.err != nil {
+			if p.readFn != nil {
+				p.readFn()     // e.g. copy trailers
+				p.readFn = nil // not sticky like p.err
+			}
+			p.b = nil
+			return 0, p.err
+		}
+		p.c.Wait()
+	}
+}
+
+var (
+	errClosedPipeWrite        = errors.New("write on closed buffer")
+	errUninitializedPipeWrite = errors.New("write on uninitialized buffer")
+)
+
+// Write copies bytes from p into the buffer and wakes a reader.
+// It is an error to write more data than the buffer can hold.
+func (p *pipe) Write(d []byte) (n int, err error) {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.c.L == nil {
+		p.c.L = &p.mu
+	}
+	defer p.c.Signal()
+	if p.err != nil || p.breakErr != nil {
+		return 0, errClosedPipeWrite
+	}
+	// pipe.setBuffer is never invoked, leaving the buffer uninitialized.
+	// We shouldn't try to write to an uninitialized pipe,
+	// but returning an error is better than panicking.
+	if p.b == nil {
+		return 0, errUninitializedPipeWrite
+	}
+	return p.b.Write(d)
+}
+
+// CloseWithError causes the next Read (waking up a current blocked
+// Read if needed) to return the provided err after all data has been
+// read.
+//
+// The error must be non-nil.
+func (p *pipe) CloseWithError(err error) { p.closeWithError(&p.err, err, nil) }
+
+// BreakWithError causes the next Read (waking up a current blocked
+// Read if needed) to return the provided err immediately, without
+// waiting for unread data.
+func (p *pipe) BreakWithError(err error) { p.closeWithError(&p.breakErr, err, nil) }
+
+// closeWithErrorAndCode is like CloseWithError but also sets some code to run
+// in the caller's goroutine before returning the error.
+func (p *pipe) closeWithErrorAndCode(err error, fn func()) { p.closeWithError(&p.err, err, fn) }
+
+func (p *pipe) closeWithError(dst *error, err error, fn func()) {
+	if err == nil {
+		panic("err must be non-nil")
+	}
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.c.L == nil {
+		p.c.L = &p.mu
+	}
+	defer p.c.Signal()
+	if *dst != nil {
+		// Already been done.
+		return
+	}
+	p.readFn = fn
+	if dst == &p.breakErr {
+		if p.b != nil {
+			p.unread += p.b.Len()
+		}
+		p.b = nil
+	}
+	*dst = err
+	p.closeDoneLocked()
+}
+
+// requires p.mu be held.
+func (p *pipe) closeDoneLocked() {
+	if p.donec == nil {
+		return
+	}
+	// Close if unclosed. This isn't racy since we always
+	// hold p.mu while closing.
+	select {
+	case <-p.donec:
+	default:
+		close(p.donec)
+	}
+}
+
+// Err returns the error (if any) first set by BreakWithError or CloseWithError.
+func (p *pipe) Err() error {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.breakErr != nil {
+		return p.breakErr
+	}
+	return p.err
+}
+
+// Done returns a channel which is closed if and when this pipe is closed
+// with CloseWithError.
+func (p *pipe) Done() <-chan struct{} {
+	p.mu.Lock()
+	defer p.mu.Unlock()
+	if p.donec == nil {
+		p.donec = make(chan struct{})
+		if p.err != nil || p.breakErr != nil {
+			// Already hit an error.
+			p.closeDoneLocked()
+		}
+	}
+	return p.donec
+}