simplecadapi 2.2.7__cp310-cp310-win_amd64.whl

simplecadapi/__init__.py

@@ -0,0 +1,888 @@
+"""SimpleCAD API: a simplified OpenCASCADE-native Python CAD modeling API.
+
+Where things live:
+
+* The modeling API (shapes, operators, sketches, products, queries, expressions) is C++: ``src/cpp/src/`` implements it,
+  ``src/cpp/bindings/python/bind_*.cpp`` declares it to Python as the module ``simplecadapi._cpp``.  The import block below
+  says which binding file declares each name.
+* ``simplecadapi.core``, ``simplecadapi.operators.*``, ``simplecadapi.ql``, ... are forwarding modules: they only
+  re-export those names under the paths the SDK has always had (each one lists its sources in its docstring).
+* ``simplecadapi/_native/`` is the Python glue around the C++ module (``compat.py`` wraps and documents it,
+  ``session.py`` records graph nodes for the layers written in Python, ``glue.py`` lists the extra names).
+* Everything else (runtime, build, artifacts, editor, inspect, exporter, translators, scene) is Python.
+"""
+
+
+# start delvewheel patch
+def _delvewheel_patch_1_13_2():
+    import os
+    if os.path.isdir(libs_dir := os.path.abspath(os.path.join(os.path.dirname(__file__), os.pardir, 'simplecadapi.libs'))):
+        os.add_dll_directory(libs_dir)
+
+
+_delvewheel_patch_1_13_2()
+del _delvewheel_patch_1_13_2
+# end delvewheel patch
+
+import sys
+from pathlib import Path
+from typing import Any
+
+from ._glue import install as _install_cpp_backend
+
+# Prepare the C++ module (error classes, signature wrappers, recording wrappers) before anything imports it.
+_install_cpp_backend()
+
+from ._internal.mapping_pickle import install_mapping_proxy_pickle
+from ._internal.os_compat import harden_console_streams
+
+# Non-UTF consoles must escape unencodable diagnostic text instead of
+# raising UnicodeEncodeError inside error handlers, where it would mask
+# the real failure.
+harden_console_streams((sys.stdout, sys.stderr))
+
+# Definitions freeze their mappings, and the notebook runtime pickles them
+# with the products that carry them.
+install_mapping_proxy_pickle()
+
+from . import math, ql, std, surface
+
+# Features that read OpenCASCADE shapes load on first use.
+_LAZY_SUBMODULES = ("exporter", "inspect", "translator")
+
+
+def __getattr__(name: str) -> Any:
+    if name in _LAZY_SUBMODULES:
+        import importlib
+
+        module = importlib.import_module(f".{name}", __name__)
+        globals()[name] = module
+        return module
+    raise AttributeError(f"module {__name__!r} has no attribute {name!r}")
+
+
+from .artifacts import (
+    ArtifactLimits,
+    ArtifactValidationError,
+    AssemblyDefinition,
+    BlobRef,
+    ConnectorInterface,
+    FileInputSnapshot,
+    FeatureGraphArtifact,
+    InterfaceHashes,
+    MaterialRef,
+    PartDefinition,
+    PartInstance,
+    SourceFileSnapshot,
+    PartRef,
+    decode_assembly_definition,
+    encode_assembly_definition,
+    encode_part_definition,
+    encode_feature_graph_artifact,
+    export_assembly_definition,
+    export_part_definition,
+    geometry_interface_descriptor,
+    geometry_interface_fingerprint,
+    load_assembly_definition,
+    load_feature_graph_artifact,
+    load_part_definition,
+    materialize_definition,
+    validate_assembly_definition_graph,
+)
+from .build import (
+    AssemblyBuildResult,
+    FileInput,
+    PartBuildResult,
+    assemble,
+    file_input,
+    part,
+)
+# The geometry, sketch, product, query and reactive API is implemented in C++ (src/cpp/src/..., declared to Python by
+# src/cpp/bindings/python/bind_*.cpp); the names below are grouped by the binding file that declares them.
+from simplecadapi._cpp import (
+    # (defined in Python, or by the module itself)
+    acos,
+    ANGLE,
+    AREA,
+    asin,
+    Assembly,
+    atan,
+    CM,
+    Connector,
+    ConnectorAnchor,
+    ConnectorRef,
+    constrain_angle_rsketch,
+    constrain_coincident_rsketch,
+    constrain_collinear_rsketch,
+    constrain_concentric_rsketch,
+    constrain_connect_rsketch,
+    constrain_diameter_rsketch,
+    constrain_distance_rsketch,
+    constrain_distance_x_rsketch,
+    constrain_distance_y_rsketch,
+    constrain_equal_length_rsketch,
+    constrain_equal_radius_rsketch,
+    constrain_fix_rsketch,
+    constrain_horizontal_rsketch,
+    constrain_length_rsketch,
+    constrain_line_distance_rsketch,
+    constrain_major_radius_rsketch,
+    constrain_midpoint_rsketch,
+    constrain_minor_radius_rsketch,
+    constrain_normal_rsketch,
+    constrain_parallel_rsketch,
+    constrain_perpendicular_rsketch,
+    constrain_point_on_rsketch,
+    constrain_points_horizontal_rsketch,
+    constrain_points_vertical_rsketch,
+    constrain_radius_rsketch,
+    constrain_vertical_rsketch,
+    Constraint,
+    cos,
+    CUBIC_CM,
+    CUBIC_FOOT,
+    CUBIC_INCH,
+    CUBIC_M,
+    CUBIC_MM,
+    DEGREE,
+    DIMENSIONLESS,
+    FOOT,
+    GeometryRef,
+    INCH,
+    LENGTH,
+    LineageDerivation,
+    LineagePolicy,
+    M,
+    make_2d_cut_rface,
+    make_2d_intersect_rface,
+    make_2d_union_rface,
+    Material,
+    MM,
+    ONE,
+    Part,
+    PERCENT,
+    RADIAN,
+    ScalarLimit,
+    sin,
+    sqrt,
+    SQUARE_CM,
+    SQUARE_FOOT,
+    SQUARE_INCH,
+    SQUARE_M,
+    SQUARE_MM,
+    TagAttachment,
+    TagCertainty,
+    TagEvidenceKind,
+    TagLifecycle,
+    TagProducerKind,
+    TagScope,
+    TagTargetKind,
+    tan,
+    TopologyPropagation,
+    TrackingPolicy,
+    UnitValidationError,
+    VOLUME,
+    WORLD_CS,
+    # bind_core.cpp
+    CoordinateSystem,
+    get_current_cs,
+    SimpleWorkplane,
+    # bind_ops_features.cpp
+    boolean_rsolidlist,
+    chamfer_rsolid,
+    cut_rsolid,
+    cut_rsolid_list,
+    draft_rsolid,
+    extrude_rsolid,
+    extrude_taper_rsolid,
+    extrude_until_rsolid,
+    fillet_rsolid,
+    helical_sweep_rsolid,
+    intersect_rsolid,
+    linear_pattern_rsolidlist,
+    loft_rsolid,
+    mirror_shape,
+    offset_rsolid,
+    radial_pattern_rsolidlist,
+    revolve_rsolid,
+    rotate_shape,
+    scale_rsolid,
+    shell_rsolid,
+    sweep_multisection_rsolid,
+    sweep_rsolid,
+    transform_rsolid,
+    translate_shape,
+    twisted_sweep_rsolid,
+    union_rsolid,
+    # bind_ops_geometry.cpp
+    load_brep_region_rshell,
+    load_brep_region_rsolid,
+    make_angle_arc_redge,
+    make_angle_arc_rwire,
+    make_box_rsolid,
+    make_circle_redge,
+    make_circle_rface,
+    make_circle_rwire,
+    make_cone_rsolid,
+    make_cylinder_rsolid,
+    make_ellipse_redge,
+    make_ellipse_rface,
+    make_ellipse_rwire,
+    make_face_from_wire_rface,
+    make_face_from_wires_rface,
+    make_helix_redge,
+    make_helix_rwire,
+    make_interpolated_spline_redge,
+    make_interpolated_spline_rwire,
+    make_line_redge,
+    make_periodic_spline_rwire,
+    make_point_rvertex,
+    make_polyline_rwire,
+    make_rectangle_rface,
+    make_rectangle_rwire,
+    make_segment_redge,
+    make_segment_rwire,
+    make_sphere_rsolid,
+    make_spline_redge,
+    make_spline_rwire,
+    make_three_point_arc_redge,
+    make_three_point_arc_rwire,
+    make_wire_from_edges_rwire,
+    # bind_product.cpp
+    add_belt_constraint_rassembly,
+    add_component_rassembly,
+    add_connector_rpart,
+    add_fixed_constraint_rassembly,
+    add_gear_constraint_rassembly,
+    add_prismatic_constraint_rassembly,
+    add_rack_pinion_constraint_rassembly,
+    add_revolute_constraint_rassembly,
+    assign_material_rpart,
+    ground_component_rassembly,
+    identity_placement_rplacement,
+    inspect_assembly_constraints_rconstraintreport,
+    make_assembly_rassembly,
+    make_compound_from_assembly_rcompound,
+    make_connector_ref_rconnectorref,
+    make_edge_connector_rconnector,
+    make_face_connector_rconnector,
+    make_material_rmaterial,
+    make_part_rpart,
+    make_placement_connector_rconnector,
+    make_placement_rplacement,
+    make_scalar_limit_rscalarlimit,
+    make_vertex_connector_rconnector,
+    measure_constraint_residual_rconstraintresidual,
+    place_component_rassembly,
+    set_public_connector_rassembly,
+    solve_assembly_constraints_rassembly,
+    unground_component_rassembly,
+    # bind_product_values.cpp
+    Component,
+    ConstraintReport,
+    ConstraintResidual,
+    PublicConnectorRef,
+    # bind_reactive_exprs.cpp
+    atan2,
+    Const,
+    const,
+    DimensionTolerance,
+    Expr,
+    expression_uses_units,
+    ExpressionGraph,
+    infer_dimension,
+    Var,
+    var,
+    # bind_reactive_math.cpp
+    BSplineFitResult,
+    fit_cubic_bspline_control_points,
+    # bind_reactive_session.cpp
+    get_active_session,
+    suspend_graph_recording,
+    # bind_reactive_units.cpp
+    canonical_unit_for_dimension,
+    convert_value,
+    Dimension,
+    get_unit,
+    Unit,
+    # bind_semantic.cpp
+    apply_tag,
+    apply_tag_rselection,
+    explain_tag,
+    list_tags,
+    select_edges_by_tag,
+    select_faces_by_tag,
+    SemanticDelta,
+    SemanticRef,
+    TagBinding,
+    TagBindingScope,
+    TagEvidence,
+    tagging,
+    TagLineageWitness,
+    TagProducer,
+    TagPropagation,
+    TagTarget,
+    # bind_sketch.cpp
+    add_arc_rsketch,
+    add_bspline_rsketch,
+    add_circle_rsketch,
+    add_ellipse_rsketch,
+    add_line_rsketch,
+    add_point_rsketch,
+    constrain_midpoint_points_rsketch,
+    constrain_mirror_rsketch,
+    constrain_symmetric_rsketch,
+    constrain_tangent_rsketch,
+    get_default_sketch_solver_backend,
+    get_sketch_entity_rsketchref,
+    get_sketch_point_rsketchref,
+    get_sketch_solver_backend,
+    inspect_sketch_rsketchresult,
+    make_face_from_sketch_rface,
+    make_sketch_rsketch,
+    make_wire_from_sketch_rwire,
+    register_sketch_solver_backend,
+    set_default_sketch_solver_backend,
+    Sketch,
+    sketch_solver_backend,
+    SketchConstraint,
+    SketchConstraintDiagnostic,
+    SketchRef,
+    SketchSolverBackend,
+    SketchSolveResult,
+    SketchSolverOptions,
+    # bind_surface.cpp
+    fill_holes_rshell,
+    fit_point_grid_rface,
+    free_boundaries_rwirelist,
+    loft_rshell,
+    make_bezier_surface_rface,
+    make_cylindrical_surface_rface,
+    make_gordon_surface_rface,
+    make_ruled_surface_rface,
+    make_solid_from_shell_rsolid,
+    make_surface_patch_rface,
+    sew_faces_rshell,
+    SurfaceBoundary,
+    SurfaceFillingSettings,
+    trim_surface_rface,
+    # bind_topo.cpp
+    AnyShape,
+    Compound,
+    Edge,
+    Face,
+    Shell,
+    Solid,
+    Vertex,
+    Wire,
+)
+from .core import TaggedMixin
+from .errors import SimpleCADError
+from simplecadapi._glue.session import GraphSession
+from .operators import render_screenshot_rpath
+from .product.placement import Placement
+from .product.capture import CaptureResult, capture
+from .product.packages import (
+    PRODUCT_PACKAGE_SCHEMA_VERSION,
+    ProductPackage,
+    ProductPackageError,
+    build_product_package,
+    encode_product_package,
+    load_product_package,
+    read_product_package,
+    validate_product_package,
+)
+from .recording.serializer import (
+    export_graph_json,
+    export_model_json,
+    export_session_json,
+    import_graph_json,
+    import_model_json,
+    import_session_json,
+    replay_graph,
+    replay_model_json,
+)
+from .params.tolerance import (
+    ToleranceAnalysis,
+    ToleranceAnalysisError,
+    ToleranceCheck,
+    ToleranceContribution,
+    ToleranceGraph,
+    ToleranceMethod,
+    ToleranceReport,
+    ToleranceRequirement,
+    ToleranceValidationError,
+    analyze_tolerance,
+    check_tolerance,
+)
+from .params.units import UnitLike
+
+# Avoid advertising internal implementation submodules from the top-level package
+# namespace. They remain importable as `simplecadapi.<module>` when needed.
+for _name in ("topology", "recording", "params", "product", "_internal"):
+    globals().pop(_name, None)
+
+__author__ = "SimpleCAD API Team"
+__description__ = "Simplified OpenCASCADE-native CAD modeling Python API"
+
+# Convenience aliases
+Workplane = SimpleWorkplane
+
+# Creation-function aliases
+create_angle_arc = make_angle_arc_redge
+create_angle_arc_wire = make_angle_arc_rwire
+create_arc = make_three_point_arc_redge
+create_arc_wire = make_three_point_arc_rwire
+create_box = make_box_rsolid
+create_circle_edge = make_circle_redge
+create_circle_face = make_circle_rface
+create_circle_wire = make_circle_rwire
+create_cylinder = make_cylinder_rsolid
+create_face_from_wire = make_face_from_wire_rface
+create_face_from_wires = make_face_from_wires_rface
+create_helix = make_helix_redge
+create_helix_wire = make_helix_rwire
+create_interpolated_spline = make_interpolated_spline_redge
+create_interpolated_spline_wire = make_interpolated_spline_rwire
+create_line = make_line_redge
+create_periodic_spline_wire = make_periodic_spline_rwire
+create_point = make_point_rvertex
+create_polyline_wire = make_polyline_rwire
+create_rectangle_face = make_rectangle_rface
+create_rectangle_wire = make_rectangle_rwire
+create_segment = make_segment_redge
+create_segment_wire = make_segment_rwire
+create_sphere = make_sphere_rsolid
+create_spline = make_spline_redge
+create_spline_wire = make_spline_rwire
+create_wire_from_edges = make_wire_from_edges_rwire
+
+# Transform aliases
+rotate = rotate_shape
+translate = translate_shape
+
+# 3D operation aliases
+extrude = extrude_rsolid
+revolve = revolve_rsolid
+
+# Boolean aliases
+cut = cut_rsolid
+intersect = intersect_rsolid
+union = union_rsolid
+
+
+def use(path: str | Path, /, *, id: str | None = None, **overrides: Any) -> Part | Assembly:
+    """Run the SimpleCAD notebook at *path* and return its product.
+
+    See :func:`simplecadapi.runtime.use`.  The runtime (and marimo) is
+    imported on first use, so ``import simplecadapi`` stays light.
+    """
+
+    from .runtime import use as run_and_use
+
+    return run_and_use(path, id=id, **overrides)
+
+
+def notebook_id() -> str:
+    """Return the id of the notebook run the calling cell belongs to.
+
+    See :func:`simplecadapi.runtime.notebook_id`; name a part family's
+    product with it, ``scad.Part(part_id=scad.notebook_id(), ...)``.
+    """
+
+    from .runtime import notebook_id as running_notebook_id
+
+    return running_notebook_id()
+
+
+__all__ = [
+    "exporter",
+    # Core classes
+    "CoordinateSystem",
+    "SimpleWorkplane",
+    "Workplane",
+    "Vertex",
+    "Edge",
+    "Wire",
+    "Face",
+    "Shell",
+    "Solid",
+    "Compound",
+    "AnyShape",
+    # Surface construction
+    "SurfaceBoundary",
+    "SurfaceFillingSettings",
+    "make_bezier_surface_rface",
+    "make_cylindrical_surface_rface",
+    "fit_point_grid_rface",
+    "make_ruled_surface_rface",
+    "make_gordon_surface_rface",
+    "make_surface_patch_rface",
+    "loft_rshell",
+    "trim_surface_rface",
+    "sew_faces_rshell",
+    "make_solid_from_shell_rsolid",
+    "free_boundaries_rwirelist",
+    "fill_holes_rshell",
+    "TaggedMixin",
+    # Coordinate systems
+    "get_current_cs",
+    "WORLD_CS",
+    # Basic geometry creation
+    "make_angle_arc_redge",
+    "make_angle_arc_rwire",
+    "make_box_rsolid",
+    "load_brep_region_rsolid",
+    "load_brep_region_rshell",
+    "make_circle_redge",
+    "make_circle_rface",
+    "make_circle_rwire",
+    "make_cone_rsolid",
+    "make_cylinder_rsolid",
+    "make_ellipse_rface",
+    "make_ellipse_redge",
+    "make_ellipse_rwire",
+    "make_face_from_sketch_rface",
+    "make_face_from_wire_rface",
+    "make_face_from_wires_rface",
+    "make_helix_redge",
+    "make_helix_rwire",
+    "make_interpolated_spline_redge",
+    "make_interpolated_spline_rwire",
+    "make_line_redge",
+    "make_periodic_spline_rwire",
+    "make_point_rvertex",
+    "make_polyline_rwire",
+    "make_rectangle_rface",
+    "make_rectangle_rwire",
+    "make_segment_redge",
+    "make_segment_rwire",
+    "make_sphere_rsolid",
+    "make_sketch_rsketch",
+    "make_spline_redge",
+    "make_spline_rwire",
+    "make_three_point_arc_redge",
+    "make_three_point_arc_rwire",
+    "make_wire_from_edges_rwire",
+    "make_wire_from_sketch_rwire",
+    "make_material_rmaterial",
+    "make_placement_rplacement",
+    "identity_placement_rplacement",
+    "make_part_rpart",
+    "assign_material_rpart",
+    "make_assembly_rassembly",
+    "add_component_rassembly",
+    "place_component_rassembly",
+    "make_compound_from_assembly_rcompound",
+    "make_face_connector_rconnector",
+    "make_edge_connector_rconnector",
+    "make_vertex_connector_rconnector",
+    "make_placement_connector_rconnector",
+    "add_connector_rpart",
+    "set_public_connector_rassembly",
+    "make_connector_ref_rconnectorref",
+    "make_scalar_limit_rscalarlimit",
+    "ground_component_rassembly",
+    "unground_component_rassembly",
+    "add_fixed_constraint_rassembly",
+    "add_revolute_constraint_rassembly",
+    "add_prismatic_constraint_rassembly",
+    "add_gear_constraint_rassembly",
+    "add_belt_constraint_rassembly",
+    "add_rack_pinion_constraint_rassembly",
+    "solve_assembly_constraints_rassembly",
+    "measure_constraint_residual_rconstraintresidual",
+    "inspect_assembly_constraints_rconstraintreport",
+    # Sketch construction and constraints
+    "add_point_rsketch",
+    "add_circle_rsketch",
+    "add_ellipse_rsketch",
+    "add_line_rsketch",
+    "add_arc_rsketch",
+    "add_bspline_rsketch",
+    "constrain_angle_rsketch",
+    "constrain_coincident_rsketch",
+    "constrain_collinear_rsketch",
+    "constrain_concentric_rsketch",
+    "constrain_connect_rsketch",
+    "constrain_diameter_rsketch",
+    "constrain_distance_rsketch",
+    "constrain_distance_x_rsketch",
+    "constrain_distance_y_rsketch",
+    "constrain_equal_length_rsketch",
+    "constrain_equal_radius_rsketch",
+    "constrain_fix_rsketch",
+    "constrain_horizontal_rsketch",
+    "constrain_length_rsketch",
+    "constrain_line_distance_rsketch",
+    "constrain_major_radius_rsketch",
+    "constrain_midpoint_points_rsketch",
+    "constrain_midpoint_rsketch",
+    "constrain_minor_radius_rsketch",
+    "constrain_mirror_rsketch",
+    "constrain_normal_rsketch",
+    "constrain_parallel_rsketch",
+    "constrain_perpendicular_rsketch",
+    "constrain_point_on_rsketch",
+    "constrain_points_horizontal_rsketch",
+    "constrain_points_vertical_rsketch",
+    "constrain_radius_rsketch",
+    "constrain_symmetric_rsketch",
+    "constrain_tangent_rsketch",
+    "constrain_vertical_rsketch",
+    "get_sketch_entity_rsketchref",
+    "get_sketch_point_rsketchref",
+    "inspect_sketch_rsketchresult",
+    # Transform operations
+    "mirror_shape",
+    "rotate_shape",
+    "scale_rsolid",
+    "transform_rsolid",
+    "translate_shape",
+    # 3D operations
+    "draft_rsolid",
+    "extrude_rsolid",
+    "extrude_taper_rsolid",
+    "extrude_until_rsolid",
+    "helical_sweep_rsolid",
+    "loft_rsolid",
+    "offset_rsolid",
+    "revolve_rsolid",
+    "sweep_multisection_rsolid",
+    "sweep_rsolid",
+    "twisted_sweep_rsolid",
+    # Tags and selection
+    "apply_tag",
+    "apply_tag_rselection",
+    "explain_tag",
+    "list_tags",
+    "select_edges_by_tag",
+    "select_faces_by_tag",
+    # Boolean operations
+    "boolean_rsolidlist",
+    "cut_rsolid",
+    "cut_rsolid_list",
+    "make_2d_cut_rface",
+    "intersect_rsolid",
+    "make_2d_intersect_rface",
+    "union_rsolid",
+    "make_2d_union_rface",
+    # Export
+    "replay_model_json",
+    "render_screenshot_rpath",
+    # Advanced feature operations
+    "chamfer_rsolid",
+    "fillet_rsolid",
+    "shell_rsolid",
+    # Other
+    "linear_pattern_rsolidlist",
+    "inspect",
+    "math",
+    "radial_pattern_rsolidlist",
+    "ql",
+    "std",
+    "translator",
+    "GraphSession",
+    "get_active_session",
+    "assemble",
+    "AssemblyBuildResult",
+    "part",
+    "use",
+    "notebook_id",
+    "file_input",
+    "PartBuildResult",
+    "suspend_graph_recording",
+    "export_graph_json",
+    "import_graph_json",
+    "replay_graph",
+    "export_session_json",
+    "import_session_json",
+    "CaptureResult",
+    "capture",
+    "PRODUCT_PACKAGE_SCHEMA_VERSION",
+    "ProductPackage",
+    "ProductPackageError",
+    "build_product_package",
+    "encode_product_package",
+    "read_product_package",
+    "validate_product_package",
+    "load_product_package",
+    "export_model_json",
+    "AssemblyDefinition",
+    "ArtifactLimits",
+    "ArtifactValidationError",
+    "BlobRef",
+    "ConnectorInterface",
+    "FileInput",
+    "FileInputSnapshot",
+    "InterfaceHashes",
+    "FeatureGraphArtifact",
+    "SourceFileSnapshot",
+    "encode_feature_graph_artifact",
+    "load_feature_graph_artifact",
+    "MaterialRef",
+    "PartDefinition",
+    "PartInstance",
+    "PartRef",
+    "decode_assembly_definition",
+    "encode_assembly_definition",
+    "export_assembly_definition",
+    "load_assembly_definition",
+    "materialize_definition",
+    "validate_assembly_definition_graph",
+    "encode_part_definition",
+    "export_part_definition",
+    "load_part_definition",
+    "geometry_interface_descriptor",
+    "geometry_interface_fingerprint",
+    "import_model_json",
+    "Expr",
+    "Var",
+    "Const",
+    "ExpressionGraph",
+    "DimensionTolerance",
+    "Dimension",
+    "Unit",
+    "UnitLike",
+    "UnitValidationError",
+    "DIMENSIONLESS",
+    "LENGTH",
+    "AREA",
+    "VOLUME",
+    "ANGLE",
+    "ONE",
+    "PERCENT",
+    "MM",
+    "CM",
+    "M",
+    "INCH",
+    "FOOT",
+    "DEGREE",
+    "RADIAN",
+    "SQUARE_MM",
+    "SQUARE_CM",
+    "SQUARE_M",
+    "SQUARE_INCH",
+    "SQUARE_FOOT",
+    "CUBIC_MM",
+    "CUBIC_CM",
+    "CUBIC_M",
+    "CUBIC_INCH",
+    "CUBIC_FOOT",
+    "ToleranceAnalysis",
+    "ToleranceAnalysisError",
+    "ToleranceCheck",
+    "ToleranceContribution",
+    "ToleranceGraph",
+    "ToleranceMethod",
+    "ToleranceReport",
+    "ToleranceRequirement",
+    "ToleranceValidationError",
+    "BSplineFitResult",
+    "acos",
+    "asin",
+    "atan",
+    "atan2",
+    "const",
+    "analyze_tolerance",
+    "check_tolerance",
+    "canonical_unit_for_dimension",
+    "convert_value",
+    "expression_uses_units",
+    "get_unit",
+    "infer_dimension",
+    "cos",
+    "sin",
+    "sqrt",
+    "tan",
+    "var",
+    "fit_cubic_bspline_control_points",
+    "Sketch",
+    "SketchConstraint",
+    "SketchConstraintDiagnostic",
+    "SketchRef",
+    "SketchSolveResult",
+    "SketchSolverBackend",
+    "SketchSolverOptions",
+    "get_default_sketch_solver_backend",
+    "get_sketch_solver_backend",
+    "register_sketch_solver_backend",
+    "set_default_sketch_solver_backend",
+    "sketch_solver_backend",
+    "LineageDerivation",
+    "LineagePolicy",
+    "TagAttachment",
+    "TagBinding",
+    "TagBindingScope",
+    "TagCertainty",
+    "TagEvidence",
+    "TagEvidenceKind",
+    "TagLifecycle",
+    "TagLineageWitness",
+    "TagProducer",
+    "TagProducerKind",
+    "TagPropagation",
+    "TagScope",
+    "TagTarget",
+    "TagTargetKind",
+    "TopologyPropagation",
+    "TrackingPolicy",
+    "SemanticRef",
+    "SemanticDelta",
+    "SimpleCADError",
+    "Assembly",
+    "Component",
+    "PublicConnectorRef",
+    "Connector",
+    "ConnectorAnchor",
+    "ConnectorRef",
+    "Constraint",
+    "ConstraintReport",
+    "ConstraintResidual",
+    "GeometryRef",
+    "Material",
+    "Part",
+    "Placement",
+    "ScalarLimit",
+    # Aliases
+    "create_angle_arc",
+    "create_angle_arc_wire",
+    "create_arc",
+    "create_arc_wire",
+    "create_box",
+    "create_circle_edge",
+    "create_circle_face",
+    "create_circle_wire",
+    "create_cylinder",
+    "create_face_from_wire",
+    "create_face_from_wires",
+    "create_helix",
+    "create_helix_wire",
+    "create_interpolated_spline",
+    "create_interpolated_spline_wire",
+    "create_line",
+    "create_periodic_spline_wire",
+    "create_point",
+    "create_polyline_wire",
+    "create_rectangle_face",
+    "create_rectangle_wire",
+    "create_segment",
+    "create_segment_wire",
+    "create_sphere",
+    "create_spline",
+    "create_spline_wire",
+    "create_wire_from_edges",
+    "cut",
+    "extrude",
+    "intersect",
+    "revolve",
+    "rotate",
+    "translate",
+    "union",
+]
+
+
+from ._glue import compat as _compat  # noqa: E402
+
+_compat.apply_docstrings(__import__(__name__, fromlist=["_"]))
+del _compat