seqeyes-python 0.3.15__py3-none-any.whl → 0.3.17__py3-none-any.whl

seqeyes/__init__.py

@@ -29,4 +29,4 @@ from seqeyes._plot import set, reset
 from seqeyes._renderer import SeqEyesViewer
 
 __all__ = ["set", "reset", "SeqEyesViewer"]
-__version__ = "0.3.15"
+__version__ = "0.3.17"

seqeyes/resources/pulseq-bundle.js

@@ -90,7 +90,7 @@ var Pulseq = (() => {
   });
 
   // package.json
-  var version = "0.3.15";
+  var version = "0.3.17";
 
   // src/pulseq/decompressor.ts
   function decompressShape(compressed, numSamples) {

seqeyes/resources/webview-bundle.js

@@ -1313,6 +1313,33 @@ buildLegend();
 tuSel.value=timeUnit;guSel.value=gradUnit;
 tuSel.onchange=function(){timeUnit=tuSel.value;SeqEyesPrefs.set(SeqEyesPrefs.KEYS.timeUnit,timeUnit);draw();};
 guSel.onchange=function(){gradUnit=guSel.value;SeqEyesPrefs.set(SeqEyesPrefs.KEYS.gradUnit,gradUnit);draw();};
+/**
+ * Fill a hover readout, one row per line, hanging each wrapped row under the
+ * content rather than the margin.
+ *
+ * A row like "Labels: SLC=30  SEG=5  ..." that does not fit continues under the
+ * "SLC=30", not under the "Labels:", so a continuation cannot be mistaken for a
+ * new field. The indent is that line's own label width — four columns for
+ * "RF: ", eight for "Labels: " — which `ch` gives exactly, the readout being
+ * monospace.
+ *
+ * It takes the element rather than reaching for one, because the standalone
+ * viewer calls this with its own `tt` from inside its own scope.
+ */
+function renderTooltipLines(target,lines){
+  target.textContent='';
+  for(var i=0;i<lines.length;i++){
+    var row=document.createElement('div');
+    row.textContent=lines[i];
+    var marker=lines[i].indexOf(': ');
+    if(marker>0){
+      var indent=(marker+2)+'ch';
+      row.style.paddingLeft=indent;
+      row.style.textIndent='-'+indent;
+    }
+    target.appendChild(row);
+  }
+}
 function setExportButtonEnabled(enabled){if(exportBtn)exportBtn.disabled=!enabled;}
 /* Throws rather than drawing an empty panel when a trajectory arrives without
    its ADC samples.  A reply that lost its arrays in transit used to clear the
@@ -1651,6 +1678,18 @@ function requestPnsWindow(vs,ve){
   vscApi.postMessage({command:'calculatePnsWindow',requestId:pnsWindowPending.requestId,startSec:start,endSec:end,maxPoints:120000});
 }
 
+/**
+ * The PNS series the plot is currently drawing, choosing it exactly as
+ * `pnsSeriesForView` does but without asking for a window or touching the
+ * notices. The readout runs on every mouse move and must report what is on
+ * screen, not what a hover happened to request.
+ */
+function pnsSeriesShown(vs,ve){
+  if(!pnsData)return null;
+  if(shouldRequestFinePnsWindow(vs,ve)&&pnsWindowCovers(pnsWindowData,vs,ve))return pnsWindowData;
+  return pnsData;
+}
+
 function pnsSeriesForView(vs,ve){
   if(!pnsData)return null;
   if(shouldRequestFinePnsWindow(vs,ve)){
@@ -7329,9 +7368,24 @@ function pushM1DerivedPart(parts,label,series,t){
   }
   pushDerivedPart(parts,label,series,t,'s/m');
 }
+/* Coarse PNS buckets span many TRs, so there is no single value to report: the
+   plot draws the band and the readout has to say the same thing. Interpolating
+   first to last, as the point sampler does, lands near the baseline and
+   disagrees with a band reaching several times higher. */
+function pushPnsDerivedPart(parts,label,series,t){
+  if(series&&series.kind==='envelope'){
+    var range=sampleEnvelopeRangeAtTime(series,t);if(!range)return;
+    if(range.min===range.max)parts.push(label+'='+fmtDerivedValue(range.min,'%'));
+    else parts.push(label+'\u2208['+range.min.toFixed(1)+', '+range.max.toFixed(1)+']%');
+    return;
+  }
+  pushDerivedPart(parts,label,series,t,'%');
+}
 function appendDerivedTooltipLines(lines,ct){
-  if(pnsData&&chVis[7]){
-    var p=[];pushDerivedPart(p,'X',pnsData.x,ct,'%');pushDerivedPart(p,'Y',pnsData.y,ct,'%');pushDerivedPart(p,'Z',pnsData.z,ct,'%');pushDerivedPart(p,'Norm',pnsData.n,ct,'%');
+  // The series the plot is showing, not the full-sequence one behind it.
+  var activePns=pnsSeriesShown(ox,ox+visibleDuration());
+  if(activePns&&chVis[7]){
+    var p=[];pushPnsDerivedPart(p,'X',activePns.x,ct);pushPnsDerivedPart(p,'Y',activePns.y,ct);pushPnsDerivedPart(p,'Z',activePns.z,ct);pushPnsDerivedPart(p,'Norm',activePns.n,ct);
     if(p.length)lines.push('PNS: '+p.join('  '));
   }
   var activeM1=m1SeriesForView(ox,ox+visibleDuration());
@@ -7343,14 +7397,17 @@ function appendDerivedTooltipLines(lines,ct){
 function placeTooltip(cx,cy){
   var pad=8;tt.style.left='0px';tt.style.top='0px';
   var r=tt.getBoundingClientRect(),vw=window.innerWidth,vh=window.innerHeight;
-  var left=Math.min(Math.max(pad,cx+15),Math.max(pad,vw-r.width-pad));
-  var top=cy+12;if(top+r.height+pad>vh)top=cy-r.height-12;if(top<pad)top=pad;
-  /* `left`/`top` are client coordinates, but #tt is absolutely positioned
-     inside #cc, so its style offsets are measured from #cc's box.  Writing
-     client coordinates straight out put the tooltip #cc's own offset too low
-     and made the bottom flip fire that far past the real bottom of the
-     window. */
-  var host=tt.offsetParent?tt.offsetParent.getBoundingClientRect():{left:0,top:0};
+  /* #tt is absolutely positioned inside #cc, which hides its overflow, so the
+     usable area is the plot box and not the window: with the analysis panel
+     open the window extends well past #cc, and a readout clamped to the window
+     edge is cut off where the panel begins. Its style offsets are measured
+     from #cc's box too, which is why they are written relative to it. */
+  var host=tt.offsetParent?tt.offsetParent.getBoundingClientRect()
+    :{left:0,top:0,right:vw,bottom:vh};
+  var minX=Math.max(pad,host.left+pad),maxX=Math.min(vw,host.right)-pad-r.width;
+  var minY=Math.max(pad,host.top+pad),maxY=Math.min(vh,host.bottom)-pad-r.height;
+  var left=Math.min(Math.max(minX,cx+15),Math.max(minX,maxX));
+  var top=cy+12;if(top>maxY)top=cy-r.height-12;if(top<minY)top=minY;
   tt.style.left=(left-host.left)+'px';tt.style.top=(top-host.top)+'px';
 }
 function fmtFlipAngle(value){
@@ -7421,7 +7478,7 @@ function showTooltipAt(cx,cy,ct){
     }
     appendDerivedTooltipLines(lines,ct);
     if(lines.length>1||found){
-      tt.textContent=lines.join('\n');tt.style.display='block';
+      renderTooltipLines(tt,lines);tt.style.display='block';
       placeTooltip(cx,cy);
       // Auto-dismiss on touch devices
       if(_touchTooltipTimer)clearTimeout(_touchTooltipTimer);

{seqeyes_python-0.3.15.dist-info → seqeyes_python-0.3.17.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.5
 Name: seqeyes-python
-Version: 0.3.15
+Version: 0.3.17
 Summary: Interactive Pulseq MRI sequence viewer for Jupyter — lightweight, beautiful, replaces seq.plot() in pypulseq.
 Project-URL: Homepage, https://github.com/bughht/seqeyes_plugin
 Project-URL: Repository, https://github.com/bughht/seqeyes_plugin

seqeyes_python-0.3.17.dist-info/RECORD

@@ -0,0 +1,10 @@
+seqeyes/__init__.py,sha256=gmGUUepnFpBay_gnON97kGkTcv7MgGDN4c7RbKy3nOQ,945
+seqeyes/_plot.py,sha256=v5cPAn3mO017lQlNR4bthC0QgIBK1YxjygJTAPFUz1E,8114
+seqeyes/_renderer.py,sha256=wGLMnQvajBXFrbMBO5RPchnWNplxwAR0i5uv8FkNMcs,11100
+seqeyes/resources/pulseq-bundle.js,sha256=RLvmFdpj7eGthrSIz_gzYwQ982fmrkBQHAsb8u4AjuA,227199
+seqeyes/resources/seqeyes-labels.js,sha256=6L30ejjaMLFW-0RnjAEXLm2hXireKAioVkKSUh6TeXM,21986
+seqeyes/resources/viewer.html,sha256=jtVGcMnnsL3csxuD-IA8BXvRYlTEney_o3mz0_wSJsY,95919
+seqeyes/resources/webview-bundle.js,sha256=BCFlCKpdR5_RvxVvKC4FKIPOgau49hEJua58dKcYyjs,344378
+seqeyes_python-0.3.17.dist-info/METADATA,sha256=BZEgwVXiriWR4dd_GbCMDKzSY_OzrTOoZAr4Go4Le3I,4503
+seqeyes_python-0.3.17.dist-info/WHEEL,sha256=W3fkpkm7-wf9vBI5Z-7s0eWkeM-spu78I8Neb98DeEg,87
+seqeyes_python-0.3.17.dist-info/RECORD,,

seqeyes_python-0.3.15.dist-info/RECORD

@@ -1,10 +0,0 @@
-seqeyes/__init__.py,sha256=C973CBYCEWHhxrUJFUDcGi9SkbpYxhdbRkWDVq8vtko,945
-seqeyes/_plot.py,sha256=v5cPAn3mO017lQlNR4bthC0QgIBK1YxjygJTAPFUz1E,8114
-seqeyes/_renderer.py,sha256=wGLMnQvajBXFrbMBO5RPchnWNplxwAR0i5uv8FkNMcs,11100
-seqeyes/resources/pulseq-bundle.js,sha256=V1Tn-0yu1fT2uXVlYaCkQXZgILGacz48Md1pfT5BgJs,227199
-seqeyes/resources/seqeyes-labels.js,sha256=6L30ejjaMLFW-0RnjAEXLm2hXireKAioVkKSUh6TeXM,21986
-seqeyes/resources/viewer.html,sha256=jtVGcMnnsL3csxuD-IA8BXvRYlTEney_o3mz0_wSJsY,95919
-seqeyes/resources/webview-bundle.js,sha256=cSYEInL_Paj6q3KQ4c_dQE6pPM_FA6E7t1MDaeyiZX8,341873
-seqeyes_python-0.3.15.dist-info/METADATA,sha256=OVDGVW1IUNw4Q7RVpmTIAhqjr156u5uanLjeLA2tKXc,4503
-seqeyes_python-0.3.15.dist-info/WHEEL,sha256=W3fkpkm7-wf9vBI5Z-7s0eWkeM-spu78I8Neb98DeEg,87
-seqeyes_python-0.3.15.dist-info/RECORD,,