scipy 1.15.3__cp312-cp312-macosx_14_0_arm64.whl → 1.16.0rc2__cp312-cp312-macosx_14_0_arm64.whl

scipy/special/xsf/hyp2f1.h

@@ -1,694 +0,0 @@
-/* Implementation of Gauss's hypergeometric function for complex values.
- *
- * This implementation is based on the Fortran implementation by Shanjie Zhang and
- * Jianming Jin included in specfun.f [1]_.  Computation of Gauss's hypergeometric
- * function involves handling a patchwork of special cases. By default the Zhang and
- * Jin implementation has been followed as closely as possible except for situations where
- * an improvement was obvious. We've attempted to document the reasons behind decisions
- * made by Zhang and Jin and to document the reasons for deviating from their implementation
- * when this has been done. References to the NIST Digital Library of Mathematical
- * Functions [2]_ have been added where they are appropriate. The review paper by
- * Pearson et al [3]_ is an excellent resource for best practices for numerical
- * computation of hypergeometric functions. We have followed this review paper
- * when making improvements to and correcting defects in Zhang and Jin's
- * implementation. When Pearson et al propose several competing alternatives for a
- * given case, we've used our best judgment to decide on the method to use.
- *
- * Author: Albert Steppi
- *
- * Distributed under the same license as Scipy.
- *
- * References
- * ----------
- * .. [1] S. Zhang and J.M. Jin, "Computation of Special Functions", Wiley 1996
- * .. [2] NIST Digital Library of Mathematical Functions. http://dlmf.nist.gov/,
- *        Release 1.1.1 of 2021-03-15. F. W. J. Olver, A. B. Olde Daalhuis,
- *        D. W. Lozier, B. I. Schneider, R. F. Boisvert, C. W. Clark, B. R. Miller,
- *        B. V. Saunders, H. S. Cohl, and M. A. McClain, eds.
- * .. [3] Pearson, J.W., Olver, S. & Porter, M.A.
- *        "Numerical methods for the computation of the confluent and Gauss
- *        hypergeometric functions."
- *        Numer Algor 74, 821-866 (2017). https://doi.org/10.1007/s11075-016-0173-0
- * .. [4] Raimundas Vidunas, "Degenerate Gauss Hypergeometric Functions",
- *        Kyushu Journal of Mathematics, 2007, Volume 61, Issue 1, Pages 109-135,
- * .. [5] López, J.L., Temme, N.M. New series expansions of the Gauss hypergeometric
- *        function. Adv Comput Math 39, 349-365 (2013).
- *        https://doi.org/10.1007/s10444-012-9283-y
- * """
- */
-
-#pragma once
-
-#include "config.h"
-#include "error.h"
-#include "tools.h"
-
-#include "binom.h"
-#include "cephes/gamma.h"
-#include "cephes/lanczos.h"
-#include "cephes/poch.h"
-#include "cephes/hyp2f1.h"
-#include "digamma.h"
-
-namespace xsf {
-namespace detail {
-    constexpr double hyp2f1_EPS = 1e-15;
-    /* The original implementation in SciPy from Zhang and Jin used 1500 for the
-     * maximum number of series iterations in some cases and 500 in others.
-     * Through the empirical results on the test cases in
-     * scipy/special/_precompute/hyp2f1_data.py, it was determined that these values
-     * can lead to early termination of series which would have eventually converged
-     * at a reasonable level of accuracy. We've bumped the iteration limit to 3000,
-     * and may adjust it again based on further analysis. */
-    constexpr std::uint64_t hyp2f1_MAXITER = 3000;
-
-    XSF_HOST_DEVICE inline double four_gammas_lanczos(double u, double v, double w, double x) {
-        /* Compute ratio of gamma functions using lanczos approximation.
-         *
-         * Computes gamma(u)*gamma(v)/(gamma(w)*gamma(x))
-         *
-         * It is assumed that x = u + v - w, but it is left to the user to
-         * ensure this.
-         *
-         * The lanczos approximation takes the form
-         *
-         * gamma(x) = factor(x) * lanczos_sum_expg_scaled(x)
-         *
-         * where factor(x) = ((x + lanczos_g - 0.5)/e)**(x - 0.5).
-         *
-         * The formula above is only valid for x >= 0.5, but can be extended to
-         * x < 0.5 with the reflection principle.
-         *
-         * Using the lanczos approximation when computing this ratio of gamma functions
-         * allows factors to be combined analytically to avoid underflow and overflow
-         * and produce a more accurate result. The condition x = u + v - w makes it
-         * possible to cancel the factors in the expression
-         *
-         * factor(u) * factor(v) / (factor(w) * factor(x))
-         *
-         * by taking one factor and absorbing it into the others. Currently, this
-         * implementation takes the factor corresponding to the argument with largest
-         * absolute value and absorbs it into the others.
-         *
-         * Since this is only called internally by four_gammas. It is assumed that
-         * |u| >= |v| and |w| >= |x|.
-         */
-
-        /* The below implementation may incorrectly return finite results
-         * at poles of the gamma function. Handle these cases explicitly. */
-        if ((u == std::trunc(u) && u <= 0) || (v == std::trunc(v) && v <= 0)) {
-            /* Return nan if numerator has pole. Diverges to +- infinity
-             * depending on direction so value is undefined. */
-            return std::numeric_limits<double>::quiet_NaN();
-        }
-        if ((w == std::trunc(w) && w <= 0) || (x == std::trunc(x) && x <= 0)) {
-            // Return 0 if denominator has pole but not numerator.
-            return 0.0;
-        }
-
-        double result = 1.0;
-        double ugh, vgh, wgh, xgh, u_prime, v_prime, w_prime, x_prime;
-
-        if (u >= 0.5) {
-            result *= cephes::lanczos_sum_expg_scaled(u);
-            ugh = u + cephes::lanczos_g - 0.5;
-            u_prime = u;
-        } else {
-            result /= cephes::lanczos_sum_expg_scaled(1 - u) * std::sin(M_PI * u) * M_1_PI;
-            ugh = 0.5 - u + cephes::lanczos_g;
-            u_prime = 1 - u;
-        }
-
-        if (v >= 0.5) {
-            result *= cephes::lanczos_sum_expg_scaled(v);
-            vgh = v + cephes::lanczos_g - 0.5;
-            v_prime = v;
-        } else {
-            result /= cephes::lanczos_sum_expg_scaled(1 - v) * std::sin(M_PI * v) * M_1_PI;
-            vgh = 0.5 - v + cephes::lanczos_g;
-            v_prime = 1 - v;
-        }
-
-        if (w >= 0.5) {
-            result /= cephes::lanczos_sum_expg_scaled(w);
-            wgh = w + cephes::lanczos_g - 0.5;
-            w_prime = w;
-        } else {
-            result *= cephes::lanczos_sum_expg_scaled(1 - w) * std::sin(M_PI * w) * M_1_PI;
-            wgh = 0.5 - w + cephes::lanczos_g;
-            w_prime = 1 - w;
-        }
-
-        if (x >= 0.5) {
-            result /= cephes::lanczos_sum_expg_scaled(x);
-            xgh = x + cephes::lanczos_g - 0.5;
-            x_prime = x;
-        } else {
-            result *= cephes::lanczos_sum_expg_scaled(1 - x) * std::sin(M_PI * x) * M_1_PI;
-            xgh = 0.5 - x + cephes::lanczos_g;
-            x_prime = 1 - x;
-        }
-
-        if (std::abs(u) >= std::abs(w)) {
-            // u has greatest absolute value. Absorb ugh into the others.
-            if (std::abs((v_prime - u_prime) * (v - 0.5)) < 100 * ugh and v > 100) {
-                /* Special case where base is close to 1. Condition taken from
-                 * Boost's beta function implementation. */
-                result *= std::exp((v - 0.5) * std::log1p((v_prime - u_prime) / ugh));
-            } else {
-                result *= std::pow(vgh / ugh, v - 0.5);
-            }
-
-            if (std::abs((u_prime - w_prime) * (w - 0.5)) < 100 * wgh and u > 100) {
-                result *= std::exp((w - 0.5) * std::log1p((u_prime - w_prime) / wgh));
-            } else {
-                result *= std::pow(ugh / wgh, w - 0.5);
-            }
-
-            if (std::abs((u_prime - x_prime) * (x - 0.5)) < 100 * xgh and u > 100) {
-                result *= std::exp((x - 0.5) * std::log1p((u_prime - x_prime) / xgh));
-            } else {
-                result *= std::pow(ugh / xgh, x - 0.5);
-            }
-        } else {
-            // w has greatest absolute value. Absorb wgh into the others.
-            if (std::abs((u_prime - w_prime) * (u - 0.5)) < 100 * wgh and u > 100) {
-                result *= std::exp((u - 0.5) * std::log1p((u_prime - w_prime) / wgh));
-            } else {
-                result *= pow(ugh / wgh, u - 0.5);
-            }
-            if (std::abs((v_prime - w_prime) * (v - 0.5)) < 100 * wgh and v > 100) {
-                result *= std::exp((v - 0.5) * std::log1p((v_prime - w_prime) / wgh));
-            } else {
-                result *= std::pow(vgh / wgh, v - 0.5);
-            }
-            if (std::abs((w_prime - x_prime) * (x - 0.5)) < 100 * xgh and x > 100) {
-                result *= std::exp((x - 0.5) * std::log1p((w_prime - x_prime) / xgh));
-            } else {
-                result *= std::pow(wgh / xgh, x - 0.5);
-            }
-        }
-        // This exhausts all cases because we assume |u| >= |v| and |w| >= |x|.
-
-        return result;
-    }
-
-    XSF_HOST_DEVICE inline double four_gammas(double u, double v, double w, double x) {
-        double result;
-
-        // Without loss of generality, ensure |u| >= |v| and |w| >= |x|.
-        if (std::abs(v) > std::abs(u)) {
-            std::swap(u, v);
-        }
-        if (std::abs(x) > std::abs(w)) {
-            std::swap(x, w);
-        }
-        /* Direct ratio tends to be more accurate for arguments in this range. Range
-         * chosen empirically based on the relevant benchmarks in
-         * scipy/special/_precompute/hyp2f1_data.py */
-        if (std::abs(u) <= 100 && std::abs(v) <= 100 && std::abs(w) <= 100 && std::abs(x) <= 100) {
-            result = cephes::Gamma(u) * cephes::Gamma(v) * (cephes::rgamma(w) * cephes::rgamma(x));
-            if (std::isfinite(result) && result != 0.0) {
-                return result;
-            }
-        }
-        result = four_gammas_lanczos(u, v, w, x);
-        if (std::isfinite(result) && result != 0.0) {
-            return result;
-        }
-        // If overflow or underflow, try again with logs.
-        result = std::exp(cephes::lgam(v) - cephes::lgam(x) + cephes::lgam(u) - cephes::lgam(w));
-        result *= cephes::gammasgn(u) * cephes::gammasgn(w) * cephes::gammasgn(v) * cephes::gammasgn(x);
-        return result;
-    }
-
-    class HypergeometricSeriesGenerator {
-        /* Maclaurin series for hyp2f1.
-         *
-         * Series is convergent for |z| < 1 but is only practical for numerical
-         * computation when |z| < 0.9.
-         */
-      public:
-        XSF_HOST_DEVICE HypergeometricSeriesGenerator(double a, double b, double c, std::complex<double> z)
-            : a_(a), b_(b), c_(c), z_(z), term_(1.0), k_(0) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            std::complex<double> output = term_;
-            term_ = term_ * (a_ + k_) * (b_ + k_) / ((k_ + 1) * (c_ + k_)) * z_;
-            ++k_;
-            return output;
-        }
-
-      private:
-        double a_, b_, c_;
-        std::complex<double> z_, term_;
-        std::uint64_t k_;
-    };
-
-    class Hyp2f1Transform1Generator {
-        /* 1 -z transformation of standard series.*/
-      public:
-        XSF_HOST_DEVICE Hyp2f1Transform1Generator(double a, double b, double c, std::complex<double> z)
-            : factor1_(four_gammas(c, c - a - b, c - a, c - b)),
-              factor2_(four_gammas(c, a + b - c, a, b) * std::pow(1.0 - z, c - a - b)),
-              generator1_(HypergeometricSeriesGenerator(a, b, a + b - c + 1, 1.0 - z)),
-              generator2_(HypergeometricSeriesGenerator(c - a, c - b, c - a - b + 1, 1.0 - z)) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            return factor1_ * generator1_() + factor2_ * generator2_();
-        }
-
-      private:
-        std::complex<double> factor1_, factor2_;
-        HypergeometricSeriesGenerator generator1_, generator2_;
-    };
-
-    class Hyp2f1Transform1LimitSeriesGenerator {
-        /* 1 - z transform in limit as c - a - b approaches an integer m. */
-      public:
-        XSF_HOST_DEVICE Hyp2f1Transform1LimitSeriesGenerator(double a, double b, double m, std::complex<double> z)
-            : d1_(xsf::digamma(a)), d2_(xsf::digamma(b)), d3_(xsf::digamma(1 + m)),
-              d4_(xsf::digamma(1.0)), a_(a), b_(b), m_(m), z_(z), log_1_z_(std::log(1.0 - z)),
-              factor_(cephes::rgamma(m + 1)), k_(0) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            std::complex<double> term_ = (d1_ + d2_ - d3_ - d4_ + log_1_z_) * factor_;
-            // Use digamma(x + 1) = digamma(x) + 1/x
-            d1_ += 1 / (a_ + k_);       // d1 = digamma(a + k)
-            d2_ += 1 / (b_ + k_);       // d2 = digamma(b + k)
-            d3_ += 1 / (1.0 + m_ + k_); // d3 = digamma(1 + m + k)
-            d4_ += 1 / (1.0 + k_);      // d4 = digamma(1 + k)
-            factor_ *= (a_ + k_) * (b_ + k_) / ((k_ + 1.0) * (m_ + k_ + 1)) * (1.0 - z_);
-            ++k_;
-            return term_;
-        }
-
-      private:
-        double d1_, d2_, d3_, d4_, a_, b_, m_;
-        std::complex<double> z_, log_1_z_, factor_;
-        int k_;
-    };
-
-    class Hyp2f1Transform2Generator {
-        /* 1/z transformation of standard series.*/
-      public:
-        XSF_HOST_DEVICE Hyp2f1Transform2Generator(double a, double b, double c, std::complex<double> z)
-            : factor1_(four_gammas(c, b - a, b, c - a) * std::pow(-z, -a)),
-              factor2_(four_gammas(c, a - b, a, c - b) * std::pow(-z, -b)),
-              generator1_(HypergeometricSeriesGenerator(a, a - c + 1, a - b + 1, 1.0 / z)),
-              generator2_(HypergeometricSeriesGenerator(b, b - c + 1, b - a + 1, 1.0 / z)) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            return factor1_ * generator1_() + factor2_ * generator2_();
-        }
-
-      private:
-        std::complex<double> factor1_, factor2_;
-        HypergeometricSeriesGenerator generator1_, generator2_;
-    };
-
-    class Hyp2f1Transform2LimitSeriesGenerator {
-        /* 1/z transform in limit as a - b approaches a non-negative integer m. (Can swap a and b to
-         * handle the m a negative integer case. */
-      public:
-        XSF_HOST_DEVICE Hyp2f1Transform2LimitSeriesGenerator(double a, double b, double c, double m,
-                                                                 std::complex<double> z)
-            : d1_(xsf::digamma(1.0)), d2_(xsf::digamma(1 + m)), d3_(xsf::digamma(a)),
-              d4_(xsf::digamma(c - a)), a_(a), b_(b), c_(c), m_(m), z_(z), log_neg_z_(std::log(-z)),
-              factor_(xsf::cephes::poch(b, m) * xsf::cephes::poch(1 - c + b, m) *
-                      xsf::cephes::rgamma(m + 1)),
-              k_(0) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            std::complex<double> term = (d1_ + d2_ - d3_ - d4_ + log_neg_z_) * factor_;
-            // Use digamma(x + 1) = digamma(x) + 1/x
-            d1_ += 1 / (1.0 + k_);         // d1 = digamma(1 + k)
-            d2_ += 1 / (1.0 + m_ + k_);    // d2 = digamma(1 + m + k)
-            d3_ += 1 / (a_ + k_);          // d3 = digamma(a + k)
-            d4_ -= 1 / (c_ - a_ - k_ - 1); // d4 = digamma(c - a - k)
-            factor_ *= (b_ + m_ + k_) * (1 - c_ + b_ + m_ + k_) / ((k_ + 1) * (m_ + k_ + 1)) / z_;
-            ++k_;
-            return term;
-        }
-
-      private:
-        double d1_, d2_, d3_, d4_, a_, b_, c_, m_;
-        std::complex<double> z_, log_neg_z_, factor_;
-        std::uint64_t k_;
-    };
-
-    class Hyp2f1Transform2LimitSeriesCminusAIntGenerator {
-        /* 1/z transform in limit as a - b approaches a non-negative integer m, and c - a approaches
-         * a positive integer n. */
-      public:
-        XSF_HOST_DEVICE Hyp2f1Transform2LimitSeriesCminusAIntGenerator(double a, double b, double c, double m,
-                                                                           double n, std::complex<double> z)
-            : d1_(xsf::digamma(1.0)), d2_(xsf::digamma(1 + m)), d3_(xsf::digamma(a)),
-              d4_(xsf::digamma(n)), a_(a), b_(b), c_(c), m_(m), n_(n), z_(z), log_neg_z_(std::log(-z)),
-              factor_(xsf::cephes::poch(b, m) * xsf::cephes::poch(1 - c + b, m) *
-                      xsf::cephes::rgamma(m + 1)),
-              k_(0) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            std::complex<double> term;
-            if (k_ < n_) {
-                term = (d1_ + d2_ - d3_ - d4_ + log_neg_z_) * factor_;
-                // Use digamma(x + 1) = digamma(x) + 1/x
-                d1_ += 1 / (1.0 + k_);    // d1 = digamma(1 + k)
-                d2_ += 1 / (1 + m_ + k_); // d2 = digamma(1 + m + k)
-                d3_ += 1 / (a_ + k_);     // d3 = digamma(a + k)
-                d4_ -= 1 / (n_ - k_ - 1); // d4 = digamma(c - a - k)
-                factor_ *= (b_ + m_ + k_) * (1 - c_ + b_ + m_ + k_) / ((k_ + 1) * (m_ + k_ + 1)) / z_;
-                ++k_;
-                return term;
-            }
-            if (k_ == n_) {
-                /* When c - a approaches a positive integer and k_ >= c - a = n then
-                 * poch(1 - c + b + m + k) = poch(1 - c + a + k) = approaches zero and
-                 * digamma(c - a - k) approaches a pole. However we can use the limit
-                 * digamma(-n + epsilon) / gamma(-n + epsilon) -> (-1)**(n + 1) * (n+1)! as epsilon -> 0
-                 * to continue the series.
-                 *
-                 * poch(1 - c + b, m + k) = gamma(1 - c + b + m + k)/gamma(1 - c + b)
-                 *
-                 * If a - b is an integer and c - a is an integer, then a and b must both be integers, so assume
-                 * a and b are integers and take the limit as c approaches an integer.
-                 *
-                 * gamma(1 - c + epsilon + a + k)/gamma(1 - c - epsilon + b) =
-                 * (gamma(c + epsilon - b) / gamma(c + epsilon - a - k)) *
-                 * (sin(pi * (c + epsilon - b)) / sin(pi * (c + epsilon - a - k))) (reflection principle)
-                 *
-                 * In the limit as epsilon goes to zero, the ratio of sines will approach
-                 * (-1)**(a - b + k) = (-1)**(m + k)
-                 *
-                 * We may then replace
-                 *
-                 * poch(1 - c - epsilon + b, m + k)*digamma(c + epsilon - a - k)
-                 *
-                 * with
-                 *
-                 * (-1)**(a - b + k)*gamma(c + epsilon - b) * digamma(c + epsilon - a - k) / gamma(c + epsilon - a - k)
-                 *
-                 * and taking the limit epsilon -> 0 gives
-                 *
-                 * (-1)**(a - b + k) * gamma(c - b) * (-1)**(k + a - c + 1)(k + a - c)!
-                 * = (-1)**(c - b - 1)*Gamma(k + a - c + 1)
-                 */
-                factor_ = std::pow(-1, m_ + n_) * xsf::binom(c_ - 1, b_ - 1) *
-                          xsf::cephes::poch(c_ - a_ + 1, m_ - 1) / std::pow(z_, static_cast<double>(k_));
-            }
-            term = factor_;
-            factor_ *= (b_ + m_ + k_) * (k_ + a_ - c_ + 1) / ((k_ + 1) * (m_ + k_ + 1)) / z_;
-            ++k_;
-            return term;
-        }
-
-      private:
-        double d1_, d2_, d3_, d4_, a_, b_, c_, m_, n_;
-        std::complex<double> z_, log_neg_z_, factor_;
-        std::uint64_t k_;
-    };
-
-    class Hyp2f1Transform2LimitFinitePartGenerator {
-        /* Initial finite sum in limit as a - b approaches a non-negative integer m. The limiting series
-         * for the 1 - z transform also has an initial finite sum, but it is a standard hypergeometric
-         * series. */
-      public:
-        XSF_HOST_DEVICE Hyp2f1Transform2LimitFinitePartGenerator(double b, double c, double m,
-                                                                     std::complex<double> z)
-            : b_(b), c_(c), m_(m), z_(z), term_(cephes::Gamma(m) * cephes::rgamma(c - b)), k_(0) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            std::complex<double> output = term_;
-            term_ = term_ * (b_ + k_) * (c_ - b_ - k_ - 1) / ((k_ + 1) * (m_ - k_ - 1)) / z_;
-            ++k_;
-            return output;
-        }
-
-      private:
-        double b_, c_, m_;
-        std::complex<double> z_, term_;
-        std::uint64_t k_;
-    };
-
-    class LopezTemmeSeriesGenerator {
-        /* Lopez-Temme Series for Gaussian hypergeometric function [4].
-         *
-         * Converges for all z with real(z) < 1, including in the regions surrounding
-         * the points exp(+- i*pi/3) that are not covered by any of the standard
-         * transformations.
-         */
-      public:
-        XSF_HOST_DEVICE LopezTemmeSeriesGenerator(double a, double b, double c, std::complex<double> z)
-            : n_(0), a_(a), b_(b), c_(c), phi_previous_(1.0), phi_(1 - 2 * b / c), z_(z), Z_(a * z / (z - 2.0)) {}
-
-        XSF_HOST_DEVICE std::complex<double> operator()() {
-            if (n_ == 0) {
-                ++n_;
-                return 1.0;
-            }
-            if (n_ > 1) { // Update phi and Z for n>=2
-                double new_phi = ((n_ - 1) * phi_previous_ - (2.0 * b_ - c_) * phi_) / (c_ + (n_ - 1));
-                phi_previous_ = phi_;
-                phi_ = new_phi;
-                Z_ = Z_ * z_ / (z_ - 2.0) * ((a_ + (n_ - 1)) / n_);
-            }
-            ++n_;
-            return Z_ * phi_;
-        }
-
-      private:
-        std::uint64_t n_;
-        double a_, b_, c_, phi_previous_, phi_;
-        std::complex<double> z_, Z_;
-    };
-
-    XSF_HOST_DEVICE std::complex<double> hyp2f1_transform1_limiting_case(double a, double b, double c, double m,
-                                                                             std::complex<double> z) {
-        /* 1 - z transform in limiting case where c - a - b approaches an integer m. */
-        std::complex<double> result = 0.0;
-        if (m >= 0) {
-            if (m != 0) {
-                auto series_generator = HypergeometricSeriesGenerator(a, b, 1 - m, 1.0 - z);
-                result += four_gammas(m, c, a + m, b + m) * series_eval_fixed_length(series_generator,
-                                                                                     std::complex<double>{0.0, 0.0},
-                                                                                     static_cast<std::uint64_t>(m));
-            }
-            std::complex<double> prefactor = std::pow(-1.0, m + 1) * xsf::cephes::Gamma(c) /
-                                             (xsf::cephes::Gamma(a) * xsf::cephes::Gamma(b)) *
-                                             std::pow(1.0 - z, m);
-            auto series_generator = Hyp2f1Transform1LimitSeriesGenerator(a + m, b + m, m, z);
-            result += prefactor * series_eval(series_generator, std::complex<double>{0.0, 0.0}, hyp2f1_EPS,
-                                              hyp2f1_MAXITER, "hyp2f1");
-            return result;
-        } else {
-            result = four_gammas(-m, c, a, b) * std::pow(1.0 - z, m);
-            auto series_generator1 = HypergeometricSeriesGenerator(a + m, b + m, 1 + m, 1.0 - z);
-            result *= series_eval_fixed_length(series_generator1, std::complex<double>{0.0, 0.0},
-                                               static_cast<std::uint64_t>(-m));
-            double prefactor = std::pow(-1.0, m + 1) * xsf::cephes::Gamma(c) *
-                               (xsf::cephes::rgamma(a + m) * xsf::cephes::rgamma(b + m));
-            auto series_generator2 = Hyp2f1Transform1LimitSeriesGenerator(a, b, -m, z);
-            result += prefactor * series_eval(series_generator2, std::complex<double>{0.0, 0.0}, hyp2f1_EPS,
-                                              hyp2f1_MAXITER, "hyp2f1");
-            return result;
-        }
-    }
-
-    XSF_HOST_DEVICE std::complex<double> hyp2f1_transform2_limiting_case(double a, double b, double c, double m,
-                                                                             std::complex<double> z) {
-        /* 1 / z transform in limiting case where a - b approaches a non-negative integer m. Negative integer case
-         * can be handled by swapping a and b. */
-        auto series_generator1 = Hyp2f1Transform2LimitFinitePartGenerator(b, c, m, z);
-        std::complex<double> result = cephes::Gamma(c) * cephes::rgamma(a) * std::pow(-z, -b);
-        result *=
-            series_eval_fixed_length(series_generator1, std::complex<double>{0.0, 0.0}, static_cast<std::uint64_t>(m));
-        std::complex<double> prefactor = cephes::Gamma(c) * (cephes::rgamma(a) * cephes::rgamma(c - b) * std::pow(-z, -a));
-        double n = c - a;
-        if (abs(n - std::round(n)) < hyp2f1_EPS) {
-            auto series_generator2 = Hyp2f1Transform2LimitSeriesCminusAIntGenerator(a, b, c, m, n, z);
-            result += prefactor * series_eval(series_generator2, std::complex<double>{0.0, 0.0}, hyp2f1_EPS,
-                                              hyp2f1_MAXITER, "hyp2f1");
-            return result;
-        }
-        auto series_generator2 = Hyp2f1Transform2LimitSeriesGenerator(a, b, c, m, z);
-        result += prefactor *
-                  series_eval(series_generator2, std::complex<double>{0.0, 0.0}, hyp2f1_EPS, hyp2f1_MAXITER, "hyp2f1");
-        return result;
-    }
-
-} // namespace detail
-
-XSF_HOST_DEVICE inline std::complex<double> hyp2f1(double a, double b, double c, std::complex<double> z) {
-    /* Special Cases
-     * -----------------------------------------------------------------------
-     * Takes constant value 1 when a = 0 or b = 0, even if c is a non-positive
-     * integer. This follows mpmath. */
-    if (a == 0 || b == 0) {
-        return 1.0;
-    }
-    double z_abs = std::abs(z);
-    // Equals 1 when z i 0, unless c is 0.
-    if (z_abs == 0) {
-        if (c != 0) {
-            return 1.0;
-        } else {
-            // Returning real part NAN and imaginary part 0 follows mpmath.
-            return std::complex<double>{std::numeric_limits<double>::quiet_NaN(), 0};
-        }
-    }
-    bool a_neg_int = a == std::trunc(a) && a < 0;
-    bool b_neg_int = b == std::trunc(b) && b < 0;
-    bool c_non_pos_int = c == std::trunc(c) and c <= 0;
-    /* Diverges when c is a non-positive integer unless a is an integer with
-     * c <= a <= 0 or b is an integer with c <= b <= 0, (or z equals 0 with
-     * c != 0) Cases z = 0, a = 0, or b = 0 have already been handled. We follow
-     * mpmath in handling the degenerate cases where any of a, b, c are
-     * non-positive integers. See [3] for a treatment of degenerate cases. */
-    if (c_non_pos_int && !((a_neg_int && c <= a && a < 0) || (b_neg_int && c <= b && b < 0))) {
-        return std::complex<double>{std::numeric_limits<double>::infinity(), 0};
-    }
-    /* Reduces to a polynomial when a or b is a negative integer.
-     * If a and b are both negative integers, we take care to terminate
-     * the series at a or b of smaller magnitude. This is to ensure proper
-     * handling of situations like a < c < b <= 0, a, b, c all non-positive
-     * integers, where terminating at a would lead to a term of the form 0 / 0. */
-    double max_degree;
-    if (a_neg_int || b_neg_int) {
-        if (a_neg_int && b_neg_int) {
-            max_degree = a > b ? std::abs(a) : std::abs(b);
-        } else if (a_neg_int) {
-            max_degree = std::abs(a);
-        } else {
-            max_degree = std::abs(b);
-        }
-        if (max_degree <= (double) UINT64_MAX) {
-            auto series_generator = detail::HypergeometricSeriesGenerator(a, b, c, z);
-            return detail::series_eval_fixed_length(series_generator, std::complex<double>{0.0, 0.0}, max_degree + 1);
-        } else {
-            set_error("hyp2f1", SF_ERROR_NO_RESULT, NULL);
-            return std::complex<double>{std::numeric_limits<double>::quiet_NaN(),
-                                        std::numeric_limits<double>::quiet_NaN()};
-        }
-    }
-    // Kummer's Theorem for z = -1; c = 1 + a - b (DLMF 15.4.26)
-    if (std::abs(z + 1.0) < detail::hyp2f1_EPS && std::abs(1 + a - b - c) < detail::hyp2f1_EPS && !c_non_pos_int) {
-        return detail::four_gammas(a - b + 1, 0.5 * a + 1, a + 1, 0.5 * a - b + 1);
-    }
-    std::complex<double> result;
-    bool c_minus_a_neg_int = c - a == std::trunc(c - a) && c - a < 0;
-    bool c_minus_b_neg_int = c - b == std::trunc(c - b) && c - b < 0;
-    /* If one of c - a or c - b is a negative integer, reduces to evaluating
-     * a polynomial through an Euler hypergeometric transformation.
-     * (DLMF 15.8.1) */
-    if (c_minus_a_neg_int || c_minus_b_neg_int) {
-        max_degree = c_minus_b_neg_int ? std::abs(c - b) : std::abs(c - a);
-        if (max_degree <= (double) UINT64_MAX) {
-            result = std::pow(1.0 - z, c - a - b);
-            auto series_generator = detail::HypergeometricSeriesGenerator(c - a, c - b, c, z);
-            result *=
-                detail::series_eval_fixed_length(series_generator, std::complex<double>{0.0, 0.0}, max_degree + 2);
-            return result;
-        } else {
-            set_error("hyp2f1", SF_ERROR_NO_RESULT, NULL);
-            return std::complex<double>{std::numeric_limits<double>::quiet_NaN(),
-                                        std::numeric_limits<double>::quiet_NaN()};
-        }
-    }
-    /* Diverges as real(z) -> 1 when c <= a + b.
-     * Todo: Actually check for overflow instead of using a fixed tolerance for
-     * all parameter combinations like in the Fortran original. */
-    if (std::abs(1 - z.real()) < detail::hyp2f1_EPS && z.imag() == 0 && c - a - b <= 0 && !c_non_pos_int) {
-        return std::complex<double>{std::numeric_limits<double>::infinity(), 0};
-    }
-    // Gauss's Summation Theorem for z = 1; c - a - b > 0 (DLMF 15.4.20).
-    if (z == 1.0 && c - a - b > 0 && !c_non_pos_int) {
-        return detail::four_gammas(c, c - a - b, c - a, c - b);
-    }
-    /* |z| < 0, z.real() >= 0. Use the Maclaurin Series.
-     * -----------------------------------------------------------------------
-     * Apply Euler Hypergeometric Transformation (DLMF 15.8.1) to reduce
-     * size of a and b if possible. We follow Zhang and Jin's
-     * implementation [1] although there is very likely a better heuristic
-     * to determine when this transformation should be applied. As it
-     * stands, this hurts precision in some cases. */
-    if (z_abs < 0.9 && z.real() >= 0) {
-        if (c - a < a && c - b < b) {
-            result = std::pow(1.0 - z, c - a - b);
-            auto series_generator = detail::HypergeometricSeriesGenerator(c - a, c - b, c, z);
-            result *= detail::series_eval(series_generator, std::complex<double>{0.0, 0.0}, detail::hyp2f1_EPS,
-                                          detail::hyp2f1_MAXITER, "hyp2f1");
-            return result;
-        }
-        auto series_generator = detail::HypergeometricSeriesGenerator(a, b, c, z);
-        return detail::series_eval(series_generator, std::complex<double>{0.0, 0.0}, detail::hyp2f1_EPS,
-                                   detail::hyp2f1_MAXITER, "hyp2f1");
-    }
-    /* Points near exp(iπ/3), exp(-iπ/3) not handled by any of the standard
-     * transformations. Use series of López and Temme [5]. These regions
-     * were not correctly handled by Zhang and Jin's implementation.
-     * -------------------------------------------------------------------------*/
-    if (0.9 <= z_abs && z_abs < 1.1 && std::abs(1.0 - z) >= 0.9 && z.real() >= 0) {
-        /* This condition for applying Euler Transformation (DLMF 15.8.1)
-         * was determined empirically to work better for this case than that
-         * used in Zhang and Jin's implementation for |z| < 0.9,
-         *  real(z) >= 0. */
-        if ((c - a <= a && c - b < b) || (c - a < a && c - b <= b)) {
-            auto series_generator = detail::LopezTemmeSeriesGenerator(c - a, c - b, c, z);
-            result = std::pow(1.0 - 0.5 * z, a - c); // Lopez-Temme prefactor
-            result *= detail::series_eval(series_generator, std::complex<double>{0.0, 0.0}, detail::hyp2f1_EPS,
-                                          detail::hyp2f1_MAXITER, "hyp2f1");
-            return std::pow(1.0 - z, c - a - b) * result; // Euler transform prefactor.
-        }
-        auto series_generator = detail::LopezTemmeSeriesGenerator(a, b, c, z);
-        result = detail::series_eval(series_generator, std::complex<double>{0.0, 0.0}, detail::hyp2f1_EPS,
-                                     detail::hyp2f1_MAXITER, "hyp2f1");
-        return std::pow(1.0 - 0.5 * z, -a) * result; // Lopez-Temme prefactor.
-    }
-    /* z/(z - 1) transformation (DLMF 15.8.1). Avoids cancellation issues that
-     * occur with Maclaurin series for real(z) < 0.
-     * -------------------------------------------------------------------------*/
-    if (z_abs < 1.1 && z.real() < 0) {
-        if (0 < b && b < a && a < c) {
-            std::swap(a, b);
-        }
-        auto series_generator = detail::HypergeometricSeriesGenerator(a, c - b, c, z / (z - 1.0));
-        return std::pow(1.0 - z, -a) * detail::series_eval(series_generator, std::complex<double>{0.0, 0.0},
-                                                           detail::hyp2f1_EPS, detail::hyp2f1_MAXITER, "hyp2f1");
-    }
-    /* 1 - z transformation (DLMF 15.8.4). */
-    if (0.9 <= z_abs && z_abs < 1.1) {
-        if (std::abs(c - a - b - std::round(c - a - b)) < detail::hyp2f1_EPS) {
-            // Removable singularity when c - a - b is an integer. Need to use limiting formula.
-            double m = std::round(c - a - b);
-            return detail::hyp2f1_transform1_limiting_case(a, b, c, m, z);
-        }
-        auto series_generator = detail::Hyp2f1Transform1Generator(a, b, c, z);
-        return detail::series_eval(series_generator, std::complex<double>{0.0, 0.0}, detail::hyp2f1_EPS,
-                                   detail::hyp2f1_MAXITER, "hyp2f1");
-    }
-    /* 1/z transformation (DLMF 15.8.2). */
-    if (std::abs(a - b - std::round(a - b)) < detail::hyp2f1_EPS) {
-        if (b > a) {
-            std::swap(a, b);
-        }
-        double m = std::round(a - b);
-        return detail::hyp2f1_transform2_limiting_case(a, b, c, m, z);
-    }
-    auto series_generator = detail::Hyp2f1Transform2Generator(a, b, c, z);
-    return detail::series_eval(series_generator, std::complex<double>{0.0, 0.0}, detail::hyp2f1_EPS,
-                               detail::hyp2f1_MAXITER, "hyp2f1");
-}
-
-XSF_HOST_DEVICE inline std::complex<float> hyp2f1(float a, float b, float c, std::complex<float> x) {
-    return static_cast<std::complex<float>>(hyp2f1(static_cast<double>(a), static_cast<double>(b),
-                                                   static_cast<double>(c), static_cast<std::complex<double>>(x)));
-}
-
-XSF_HOST_DEVICE inline double hyp2f1(double a, double b, double c, double x) { return cephes::hyp2f1(a, b, c, x); }
-
-XSF_HOST_DEVICE inline float hyp2f1(float a, float b, float c, float x) {
-    return hyp2f1(static_cast<double>(a), static_cast<double>(b), static_cast<double>(c), static_cast<double>(x));
-}
-
-} // namespace xsf