salome.kernel 9.14.0.post6__cp39-cp39-manylinux2014_x86_64.manylinux_2_17_x86_64.whl

salome/kernel/share/salome/resources/kernel/channel.cfg

@@ -0,0 +1,278 @@
+# =================================================================
+# PARAM SETTINGS
+#
+# ** standard.cfg : 
+#      sets up the daemon with default params as given
+#      in the CosNotification specification.
+#
+# ** channel.cfg : 
+#      sets up daemon with default params which we prefer.
+#
+# You can choose which one to use, or copy one and edit it
+# to suit your needs.
+#
+# There are only a couple of differences:
+#
+#                        standard.cfg        channel.cfg
+#
+#   PacingInterval           0                  1000  (1 second)
+#   MaximumBatchSize	     1                   8
+#
+
+# =================================================================
+#       omniNotify Configuration (Startup) Properties
+#                                                   
+# You can modify startup properties in one of 3 ways
+#
+# 1. copy this file to create your own .cfg file and edit it.  Use
+#       promp> notifd -i -c myconfig.cfg
+#    to start notifd using the config file myconfig.cfg
+#
+# 2. set an environment variable; this will override any
+#    config file settings.  e.g., for tcsh,
+#         promp> setenv LocalClockTDF 0
+#         promp> notifd -i -c channel.cfg
+#    This uses channel.cfg but changes the time zone to GMT
+#
+# 3. use explicit command-line param definitions
+#    these override both the config file and any env variable settings
+#         promp> setenv LocalClockTDF 0
+#         promp> notifd -i -c channel.cfg -DLocalClockTDF=-60
+#    This would set the time zone to 1 hour earlier than GMT
+#
+# omniNotify manages 3 kinds of properties
+#
+#   * ServerQOS properties are properties that all channels share;
+#     they cannot be changed on a per-channel basis.
+#
+#   * AdminQoS properties are properties that can only be
+#     set at the channel factory / channel level.
+#
+#   * NotifQoS properties are properties that can be set at
+#     many levels: channel factory, channel, admin, proxy;
+#     some of these can also be changed on a per-event basis.
+#
+# The channel factory's AdminQoS and NotifQoS property settings
+# are used as defaults: when creating a channel these property
+# values are used unless specific overrides are provided in
+# with the channel creation request.  Once a channel is created,
+# its AdminQoS and NotifQoS properties can be modified; the
+# factory's properties can also be modified.  Note that once a 
+# channel is created, its properties are independent of the
+# factory -- modifications to the channel properties do not affect
+# the factory defaults, and modifications to the factory defaults
+# do not affect the properties of already-created channels.
+#
+# The settings specified in config files, environment
+# variables and/or command line param definitions are used to
+# set the initial values for the server's ServerQoS properties and
+# for the channel factory's AdminQoS and NotifQoS
+# default properties.  Since the default channel is created on startup,
+# it also takes its AdminQoS and NotifQoS properties from
+# these initial settings.
+#
+#==================================================================
+
+#==================================================================
+# Misc Startup Properties
+#    -- these are essentially ServerQoS properties,
+#       but are not currently implemented that way 
+#==================================================================
+
+# Names to be assigned to the channel factory and channel created by
+# the notifd channel daemon
+
+ChannelFactoryName	ChannelFactory
+DefaultChannelName	EventChannel
+
+# Path names of the files used to store the string representation of
+# the above channel factory IOR and channel object IOR
+
+FactoryIORFileName	/tmp/rdifact.ior
+ChannelIORFileName	/tmp/rdichan.ior
+
+# If a file path is given for the following parameter,  the file is
+# used for storing debugging information. 'stderr' and 'stdout' can be
+# used to direct output to standard error / standard output.
+
+#DebugLogFile		./debug.log
+DebugLogFile		stderr
+
+# If a file path is given for the following parameter,  the file is
+# used for storing report information.  'stderr' and 'stdout' can be
+# used to direct output to standard error / standard output.
+
+#ReportLogFile		./report.log
+ReportLogFile		stdout
+
+# debug flags -- 0 is "off", 1 is "on"
+DebugDaemon               0
+DebugChannelFactory       0
+DebugFilter               0
+DebugChannel              0
+DebugConsumerAdmin        0 
+DebugSupplireAdmin        0
+DebugConsumerProxy        0
+DebugSupplierProxy        0
+DebugEventQueue           0
+DebugRDIEvent             0
+DebugFilterAdmin          0
+DebugFilterEval           0
+DebugCosConsumerProxies   0
+DebugCosSupplierProxies   0
+DebugNotifQoS             0
+DebugAdminQoS             0
+DebugNotifQueue           0
+
+# report flags -- 0 is "off", 1 is "on"
+ReportChannelStats        1
+ReportQueueSizeStats      1
+ReportConnectedConsumers  1 
+ReportConnectedSuppliers  1
+ReportConnectedFilters    1
+ReportUnconnectedFilters  1
+ReportEventRejections     1
+ReportEventDrops          1
+ReportNotifQoS            1
+ReportAdminQoS            1
+ReportServerQoS           1
+
+#==================================================================
+# Initial ServerQoS Properties
+#==================================================================
+
+# Each ConsumerAdmin and SupplierAdmin object is assigned to a group
+# and each group is processed by only one thread. The number of such
+# groups and the number of threads that handle the groups have to be
+# at least 1.  In addition,  the number of threads should not exceed
+# the number of groups
+
+NumAdminGroups		2
+NumAdminThreads		2
+
+# notifd may split the filter evaluation processing in two stages. In
+# this case, a second thread pool is used for evaluating proxy-level
+# filters.  The size of the pool is controlled by the following 
+
+NumProxyThreads		0
+
+# The following variables control the number of threads created for
+# pushing matched events to push-style consumers and pulling events
+# from pull-style suppliers.  If these values are 0,  each consumer
+# and supplier is assigned its own thread.
+
+NumPushThreads		4
+NumPullThreads		2
+
+# The following variables control the number of threads created for
+# notifying suppliers of subscription changes (using subscription_change)
+# and for notifying consumers of offer changes (using offer_change).
+# CAREFUL: Setting NumSChangeThreads to zero DISABLES 
+# the sending of subscription_change messages!
+# CAREFUL: Setting NumOChangeThreads to zero DISABLES 
+# the sending of offer_change messages
+
+NumOChangeThreads	1
+NumSChangeThreads	1
+
+# For pull style suppliers,  the time period (milliseconds) between
+# pulls is controlled by the following variable.  
+# A value of 0 corresponds to continuous pulling
+
+PullEventPeriod		100
+
+# Period in seconds used by the garbage collector of the event queue
+# The minimum number that can be used is 1
+
+QueueGCPeriod		300
+
+# The next entry specifies the time period (in seconds) between
+# each 'report' (the Report.. flags above control what gets reported).
+# The channel may have a built-in minimum, e.g, even if you say 0,
+# the channel may choose a 10 second period.  (300 seconds = 5 mins)
+
+ReportingInterval	300
+
+# Description of local clock values returned from omnithread::get_time.
+# These values are here because we do not know a portable way to get
+# the clock accuracy and the time zone across all Unix flavors and
+# Windows.  Let us know if you have a portable approach.
+#
+# LocalClockInaccLo/Hi: local clock inaccuracy in units of 100ns
+#                       (must fit in 48 bits, 32 for Lo, 16 for Hi)
+# LocalClockTDF:   local time zone expressed in minutes west of
+#                  greenwhich meridian; 300=Eastern time zone, USA
+LocalClockInaccLo     0
+LocalClockInaccHi     0
+LocalClockTDF       300
+
+#==================================================================
+# Initial Default AdminQoS Properties
+#==================================================================
+
+# Maximum number of events that will be queued by the Channel before
+# before it begins discarding events or rejecting new ones.  A value 
+# of 0 does not place any upper limit.
+
+MaxQueueLength		0
+
+# The maximum number of Consumers that can be connected to a Channel
+# at any given time.  A value of 0 does not place any upper limit. 
+
+MaxConsumers		0
+
+# The maximum number of Suppliers that can be connected to a Channel
+# at any given time.  A value of 0 does not place any upper limit. 
+
+MaxSuppliers		0
+
+# If 1, newly announced events will be discarded when the number of
+# undelivered events in a Channel is equal to 'MaxQueueLength'.  If
+# 0,  newly announced events cause existing events to be discarded 
+# according to the 'DiscardPolicy' QoS.
+
+RejectNewEvents		1
+
+#==================================================================
+# Initial Default NotifQoS Properties
+#==================================================================
+
+# EventReliability and ConnectionReliability can take the values:
+# 	0 --> CosNotification::BestEffort
+#	1 --> CosNotification::Persistent
+# OrderPolicy can take the values: 
+# 	0 --> CosNotification::AnyOrder
+# 	1 --> CosNotification::FifoOrder
+# 	2 --> CosNotification::PriorityOrder
+# 	3 --> CosNotification::DeadlineOrder
+# DiscardPolicy can take any of the above values and, in addition, 
+#	4 --> CosNotification::LifoOrder
+# StartTimeSupported and StopTimeSupported are boolean and can take
+# the values 
+#	0 --> FALSE
+#	1 --> TRUE
+#
+# NOTE: the current notifd implementation does NOT support all QoS 
+#       settings. In particular, it only supports the following:
+#		EventReliability	0
+#		ConnectionReliability	0
+#		StartTimeSupported	0
+#		StopTimeSupported	0
+
+# Note -- PacingInterval can be set programmatically to any
+# TimeBase::TimeT value (units = 100s of nanoseconds).  Here you
+# set number of MILLISECONDS, e.g., a value of 1000 means send a batch
+# roughly every 1 second (or when MaxBatchSize is reached).
+
+EventReliability	0
+ConnectionReliability	0
+Priority		0
+Timeout			0
+StartTimeSupported	0
+StopTimeSupported	0
+OrderPolicy		0
+DiscardPolicy		0
+PacingInterval		1000
+MaxEventsPerConsumer	0
+MaximumBatchSize	8
+

salome/kernel/share/salome/resources/kernel/testLauncher.xml

@@ -0,0 +1,10 @@
+<main>
+ <machine-list>
+   <machine work-directory="/tmp/testLauncher">localhost</machine>
+ </machine-list>
+ <nb-processes>1</nb-processes>
+ <output-file>testLauncher.output</output-file>
+ <command>ls > testLauncher.output</command>
+</main>
+
+

salome/kernel/version_and_config.py

@@ -0,0 +1,24 @@
+#! /usr/bin/env python3
+#  -*- coding: utf-8 -*-
+# Copyright (C) 2025  CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+version = "b430c64"
+
+config_datetime = "2025/12/05 13:53:27"

salome/share/salome/resources/kernel/CatalogModulePersonnel.xml_skel

@@ -0,0 +1,24 @@
+<?xml version='1.0' encoding='us-ascii' ?>
+ 
+<!-- XML component catalog -->
+<begin-catalog>
+
+<!-- Path prefix information -->
+
+<!-- Component list -->
+
+</begin-catalog>
+
+
+
+
+
+
+
+
+
+
+
+
+
+

salome/share/salome/resources/kernel/CatalogResources.xml

@@ -0,0 +1,4 @@
+<!DOCTYPE ResourcesCatalog>
+<resources>
+  <machine name="localhost" hostname="localhost" />
+</resources>

salome/share/salome/resources/kernel/KERNELCatalog.xml

@@ -0,0 +1,102 @@
+<?xml version='1.0' encoding='us-ascii' ?>
+ 
+<!-- XML component catalog -->
+<begin-catalog>
+
+<!-- Path prefix information -->
+
+<path-prefix-list>
+</path-prefix-list>
+
+<!-- Commonly used types  -->
+<type-list>
+  <type name="double" kind="double"/>
+  <type name="float" kind="double"/>
+  <type name="int" kind="int"/>
+  <type name="short" kind="int"/>
+  <type name="long" kind="int"/>
+  <type name="string" kind="string"/>
+  <type name="char" kind="string"/>
+  <type name="bool" kind="bool"/>
+  <type name="boolean" kind="bool"/>
+  <sequence name="dblevec" content="double"/>
+  <sequence name="intvec" content="int"/>
+  <sequence name="stringvec" content="string"/>
+  <sequence name="boolvec" content="bool"/>
+  <struct name="dataref" >
+    <member name="ref" type="string"/>
+  </struct>
+  <objref name="CALCIUM_integer" id="IDL:Ports/Calcium_Ports/Calcium_Integer_Port:1.0"/>
+  <objref name="CALCIUM_long" id="IDL:Ports/Calcium_Ports/Calcium_Long_Port:1.0"/>
+  <objref name="CALCIUM_real" id="IDL:Ports/Calcium_Ports/Calcium_Real_Port:1.0"/>
+  <objref name="CALCIUM_double" id="IDL:Ports/Calcium_Ports/Calcium_Double_Port:1.0"/>
+  <objref name="CALCIUM_string" id="IDL:Ports/Calcium_Ports/Calcium_String_Port:1.0"/>
+  <objref name="CALCIUM_logical" id="IDL:Ports/Calcium_Ports/Calcium_Logical_Port:1.0"/>
+  <objref name="CALCIUM_boolean" id="IDL:Ports/Calcium_Ports/Calcium_Logical_Port:1.0"/>
+  <objref name="CALCIUM_complex" id="IDL:Ports/Calcium_Ports/Calcium_Complex_Port:1.0"/>
+  <objref name="Param_Double_Port" id="IDL:Ports/Param_Double_Port:1.0"/>
+  <objref name="BASIC_short" id="IDL:Ports/Data_Short_Port:1.0"/>
+  <objref name="Study" id="IDL:SALOMEDS/Study:1.0"/>
+  <objref name="SObject" id="IDL:SALOMEDS/SObject:1.0"/>
+  <objref name="SALOME/SenderDouble"/>
+  <objref name="SALOME/SenderInt"/>
+  <objref name="SALOME/Matrix"/>
+  
+  <!-- Types for parametric computations -->
+  <struct name="SALOME_TYPES/Parameter">
+    <member type="string" name="name"></member>
+    <member type="string" name="value"></member>
+  </struct>
+  <sequence content="SALOME_TYPES/Parameter" name="SALOME_TYPES/ParameterList"></sequence>
+  <sequence content="double" name="SALOME_TYPES/Variable"></sequence>
+  <sequence content="SALOME_TYPES/Variable" name="SALOME_TYPES/VariableSequence"></sequence>
+  <sequence content="SALOME_TYPES/VariableSequence" name="SALOME_TYPES/StateSequence"></sequence>
+  <sequence content="SALOME_TYPES/StateSequence" name="SALOME_TYPES/TimeSequence"></sequence>
+  <sequence content="string" name="SALOME_TYPES/VarList"></sequence>
+  <struct name="SALOME_TYPES/ParametricInput">
+    <member type="SALOME_TYPES/VarList" name="inputVarList"></member>
+    <member type="SALOME_TYPES/VarList" name="outputVarList"></member>
+    <member type="SALOME_TYPES/TimeSequence" name="inputValues"></member>
+    <member type="SALOME_TYPES/ParameterList" name="specificParameters"></member>
+  </struct>
+  <struct name="SALOME_TYPES/ParametricOutput">
+    <member type="SALOME_TYPES/TimeSequence" name="outputValues"></member>
+    <member type="SALOME_TYPES/ParameterList" name="specificOutputInfos"></member>
+    <member type="long" name="returnCode"></member>
+    <member type="string" name="errorMessage"></member>
+  </struct>
+</type-list>
+
+<!-- Component list -->
+<component-list>
+	<component>
+		<!-- Component identification -->
+		<component-name>KERNEL</component-name>
+		<component-username>Salome</component-username>
+		<component-type>Other</component-type>
+		<component-author>NRI</component-author>
+		<component-version>9.13.0</component-version>
+		<component-comment>GUI Neutral Context</component-comment>
+
+	<constraint>hostname = muna</constraint>
+	</component>
+	<component>
+		<component-name>SalomeTestComponent</component-name>
+		<component-username>SalomeTestComponent</component-username>
+		<component-type>Other</component-type>
+		<component-author>NRI</component-author>
+		<component-version>9.13.0</component-version>
+		<component-comment>GUI Neutral Context</component-comment>
+		<constraint>'linux' ~ OS</constraint>
+	</component>
+	<component>
+		<component-name>SALOME_TestComponentPy</component-name>
+		<component-username>SALOME_TestComponentPy</component-username>
+		<component-type>Other</component-type>
+		<component-author>NRI</component-author>
+		<component-version>9.13.0</component-version>
+		<component-comment>GUI Neutral Context</component-comment>
+		<constraint>'linux' ~ OS</constraint>
+	</component>
+</component-list>
+</begin-catalog>

salome/share/salome/resources/kernel/SALOMEDS_Resources

@@ -0,0 +1,10 @@
+formatlist:SALOME_STUDY
+
+SALOME_STUDY.Description: SALOME Document Version 1.0
+SALOME_STUDY.FileExtension: std
+SALOME_STUDY.StoragePlugin: ad696000-5b34-11d1-b5ba-00a0c9064368
+SALOME_STUDY.RetrievalPlugin: ad696001-5b34-11d1-b5ba-00a0c9064368
+SALOME_STUDY-StandardSchema: ad696002-5b34-11d1-b5ba-00a0c9064368
+SALOME_STUDY-Standard.AttributeStoragePlugin: 47b0b826-d931-11d1-b5da-00a0c9064368
+SALOME_STUDY-Standard.AttributeRetrievalPlugin: 47b0b827-d931-11d1-b5da-00a0c9064368
+

salome/share/salome/resources/kernel/ScriptsTemplate/SALOME_CM_LOCAL_MPI_LAN.py

@@ -0,0 +1,19 @@
+import sys
+from script_parameters import ScriptLocalParameters
+
+def command(args):
+    options = ScriptLocalParameters(args)
+    if options.debug: print(options)
+
+    cmd = []
+    cmd.append("mpirun -np " + options.nb_proc)
+
+    if options.libbatch_nodefile:
+        cmd.append("-machinefile %s " % options.machine_file)
+
+    cmd.append("-x PATH,LD_LIBRARY_PATH,OMNIORB_CONFIG,SALOME_trace ")
+
+    cmd.append(options.container)
+    cmd.append(options.container_name)
+
+    return " ".join(cmd)

salome/share/salome/resources/kernel/ScriptsTemplate/SALOME_CM_LOCAL_MPI_MPICH.py

@@ -0,0 +1,18 @@
+import sys
+from script_parameters import ScriptLocalParameters
+
+def command(args):
+    options = ScriptLocalParameters(args)
+    if options.debug: print(options)
+
+    cmd = []
+    cmd.append("mpirun -np " + options.nb_proc)
+
+    if options.libbatch_nodefile:
+        cmd.append("-machinefile %s " % options.machine_file)
+
+    cmd.append("-nameserver %s" % options.name_server)
+    cmd.append(options.container)
+    cmd.append(options.container_name)
+
+    return " ".join(cmd)

salome/share/salome/resources/kernel/ScriptsTemplate/SALOME_CM_LOCAL_MPI_OPENMPI.py

@@ -0,0 +1,21 @@
+import sys
+from script_parameters import ScriptLocalParameters
+
+def command(args):
+    options = ScriptLocalParameters(args)
+    if options.debug: print(options)
+
+    cmd = []
+    cmd.append("mpirun -np " + options.nb_proc)
+
+    if options.libbatch_nodefile:
+        cmd.append("-machinefile %s " % options.machine_file)
+
+    cmd.append("-x PATH -x LD_LIBRARY_PATH -x OMNIORB_CONFIG -x SALOME_trace ")
+    if options.ompi_uri_file:
+        cmd.append("-ompi-server file:%s" % options.ompi_uri_file)
+
+    cmd.append(options.container)
+    cmd.append(options.container_name)
+
+    return " ".join(cmd)

salome/share/salome/resources/kernel/ScriptsTemplate/SALOME_CM_LOCAL_NO_MPI.py

@@ -0,0 +1,25 @@
+import sys
+from script_parameters import ScriptLocalParameters
+
+def command(args):
+    options = ScriptLocalParameters(args)
+    if options.debug: print(options)
+
+    cmd = []
+    if options.workdir:
+        if options.isTmpDir:
+            if options.Windows:
+                cmd.append("cd /d %s\n" % options.workdir)
+            else:
+                cmd.append("cd %s;" % options.workdir)
+        else:
+            if options.Windows:
+                cmd.append("mkdir %s" % options.workdir);
+                cmd.append("cd /d %s\n" % options.workdir)
+            else:
+                cmd.append("mkdir -p %s && cd %s;" % (options.workdir, options.workdir))
+
+    cmd.append(options.container)
+    cmd.append(options.container_name)
+
+    return " ".join(cmd)

salome/share/salome/resources/kernel/ScriptsTemplate/SALOME_CM_REMOTE.py

@@ -0,0 +1,108 @@
+import sys
+
+class ScriptRemoteParameters:
+    def __init__(self, args):
+        from salome.kernel import KernelBasis
+        self.debug = KernelBasis.VerbosityActivated()
+        self.protocol = args[0]
+        self.user = self._read_arg(args[1], "NULL")
+        self.host = self._read_arg(args[2], "NULL")
+        self.appli = self._read_arg(args[3], "NULL")
+        self.workdir = self._read_arg(args[4], "NULL")
+        self.ssl = True if args[5] == "1" else False
+        self.nshost = args[6]
+        self.nsport = args[7]
+        self.remote_script = self._read_arg(args[8], "NULL")
+        self.naming_service = self._read_arg(args[9], "NULL")
+        self.appli_mode = args[10]
+
+        import platform
+        self.Windows = platform.system() == "Windows"
+
+    def _read_arg(self, value, null_value):
+        if value == null_value:
+            return None
+        return value
+
+    def __str__(self):
+        str = []
+        str.append("protocol: %s" % self.protocol)
+        str.append("user: %s" % self.user)
+        str.append("hostname: %s" % self.host)
+        str.append("appli: %s" % self.appli)
+        str.append("workdir: %s" % self.workdir)
+        str.append("ssl: %s" % self.ssl)
+        str.append("nshost: %s" % self.nshost)
+        str.append("nsport: %s" % self.nsport)
+        str.append("remote_script: %s" % self.remote_script)
+        str.append("naming_service: %s" % self.naming_service)
+        str.append("appil_mode: %s" % self.appli_mode)
+        str.append("--")
+        return "\n".join(str)
+
+# ----------------------------------------------
+def command(args):
+    from salome.kernel import KernelBasis
+    options = ScriptRemoteParameters(args)
+    if options.debug:
+        KernelBasis.WriteInStdout( str(options) )
+
+    # build command depending on protocol
+    cmd = []
+    envd = (options.protocol != "srun")
+
+    if options.protocol == "rsh":
+        # RSH command
+        cmd.append("rsh")
+        if options.user:
+            cmd.append("-l " + options.user)
+        cmd.append(options.host)
+
+    elif options.protocol == "ssh":
+        # SSH command
+        cmd.append("ssh")
+        if options.user:
+            cmd.append("-l " + options.user)
+        cmd.append(options.host)
+
+    elif options.protocol == "srun":
+        # srun command
+        cmd.append("srun")
+        cmd.append("-n 1 -N 1 --overlap --mem-per-cpu=0 --cpu-bind=none")
+        cmd.append("--nodelist=" + options.host)
+
+    elif options.protocol == "pbsdsh":
+        # pbsdh command
+        cmd.append("pbsdsh")
+        cmd.append("-o -h")
+        cmd.append(options.host)
+
+    elif options.protocol == "blaunch":
+        # blaunch command
+        cmd.append("blaunch")
+        cmd.append("-no-shell")
+        cmd.append(options.host)
+
+    else:
+        # unknown protocol
+        raise ValueError("Unknown protocol: %s" % options.protocol)
+
+
+    if options.appli_mode == "dir":
+        cmd.append(options.appli + "/" + options.remote_script)
+            
+        if options.workdir:
+            cmd.append(" WORKINGDIR '%s'" % options.workdir)
+
+    elif options.appli_mode == "launcher":
+        cmd.append(options.appli + " remote")
+        if not options.ssl:
+            cmd.append("-m %s -p %s" % (options.nshost, options.nsport))
+
+        if options.workdir:
+            cmd.append("-d " + options.workdir)
+        cmd.append("--")
+
+    # elif ignore other appli_mode value
+
+    return " ".join(cmd)