quarchpy 2.2.9.dev5__py2.py3-none-any.whl → 2.2.10__py2.py3-none-any.whl

quarchpy/connection_specific/jdk_jres/lin_amd64_jdk_jre/conf/jaxp.properties

@@ -0,0 +1,200 @@
+################################################################################
+#           JAXP Configuration File
+#
+# jaxp.properties (this file) is the default configuration file for JAXP, the API
+# defined in the java.xml module. It is in java.util.Properties format and typically
+# located in the {java.home}/conf directory. It may contain key/value pairs for
+# specifying the implementation classes of JAXP factories and/or properties
+# that have corresponding system properties.
+#
+# A user-specified configuration file can be set up using the system property
+# java.xml.config.file to override any or all of the entries in jaxp.properties.
+# The following statement provides myConfigurationFile as a custom configuration
+# file:
+#     java -Djava.xml.config.file=myConfigurationFile
+################################################################################
+
+# ---- JAXP Default Configuration ----
+#
+# The JAXP default configuration (jaxp.properties) contains entries for the
+# Factory Lookup Mechanism and properties with corresponding system properties.
+# The values are generally set to the default values of the properties.
+#
+#
+# JAXP Lookup Mechanism:
+#
+# The JAXP configuration file ranks 2nd to the System Property in the precedent
+# order of the JAXP Lookup Mechanism. When the System Property is not specified,
+# a JAXP factory reads the configuration file in order to locate an implementation
+# class. If found, the class specified will be used as the factory implementation
+# class.
+#
+# The format of an entry is key=value where the key is the fully qualified name
+# of the factory and value that of the implementation class. The following entry
+# sets a DocumentBuilderFactory implementation class:
+#
+# javax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
+#
+#
+# Java SE and JDK Implementation Specific Properties:
+#
+# The JAXP configuration file ranks above the default settings in the Property
+# Precedence in that its entries will override the default values of the corresponding
+# properties.
+#
+# All properties that have System Properties defined in Java SE or supported
+# by the JDK Implementation can be placed in the configuration file to override
+# the default property values. The format is:
+#     system-property-name=value
+#
+# For example, the RESOLVE property in CatalogFeatures has an associated system
+# property called javax.xml.catalog.resolve. An entry for the RESOLVE property in the
+# configuration file therefore uses javax.xml.catalog.resolve as the key, that
+# is:
+#     javax.xml.catalog.resolve=strict
+#
+#
+# Extension Functions:
+#
+# This property determines whether XSLT and XPath extension functions are allowed.
+# The value type is boolean and the default value is false (disallowing
+# extension functions).
+#
+jdk.xml.enableExtensionFunctions=false
+#
+#
+# Overriding the default parser:
+#
+# This property allows a third party implementation to override the default
+# parser provided by the JDK. The value type is boolean and the default value is
+# false, disallowing overriding the default parser. The setting below reflects
+# the default property setting:
+#
+jdk.xml.overrideDefaultParser=false
+#
+#
+# External Access Properties:
+#
+# The External Access Properties are defined in javax.xml.XMLConstants. Their
+# system properties are javax.xml.accessExternalDTD, javax.xml.accessExternalSchema,
+# and javax.xml.accessExternalStylesheet. The values are a list of protocols separated
+# by comma, plus empty string ("") to represent no protocol allowed and the key
+# word "all" for all access. The default is "all", allowing all external resources
+# to be fetched. The followings are example of external access settings:
+#
+# allow local (file) DTDs to be retrieved
+# javax.xml.accessExternalDTD=file
+#
+# allow local (file) and remote (http) external schemas
+# javax.xml.accessExternalSchema=file, http
+#
+# reject any external stylesheets
+# javax.xml.accessExternalStylesheet=""
+#
+# allow all external stylesheets
+# javax.xml.accessExternalStylesheet="all"
+#
+#
+# Catalog Properties:
+#
+# The Catalog API defines four features: FILES, PREFER, DEFER and RESOLVE.
+# Except PREFER, all other properties can be placed in the configuration file
+# using the system properties defined for them.
+#
+# FILES: A semicolon-delimited list of URIs to locate the catalog files. The URIs
+# must be absolute and have a URL protocol handler for the URI scheme. The following
+# is an example of setting up a catalog file:
+#
+# javax.xml.catalog.files = file:///users/auser/catalog/catalog.xml
+#
+# DEFER: Indicates that the alternative catalogs including those specified in
+# delegate entries or nextCatalog are not read until they are needed. The value
+# is a boolean and the default value is true.
+#
+# javax.xml.catalog.defer=true
+#
+# RESOLVE: Determines the action if there is no matching entry found after all of
+# the specified catalogs are exhausted. The values are key words: strict, continue,
+# and ignore. The default is strict. The following setting reflects the default
+# setting.
+#
+# javax.xml.catalog.resolve=strict
+#
+#
+# useCatalog:
+# This property instructs XML processors to use XML Catalogs to resolve entity
+# references. The value is a boolean and the default value is true.
+#
+# javax.xml.useCatalog=true
+#
+# Implementation Specific Properties - jdkcatalog.resolve
+#
+# This property instructs the JDK default CatalogResolver to act in accordance with
+# the setting when unable to resolve an external reference with the built-in Catalog.
+# The options are:
+#     continue -- indicates that the processing should continue
+#     ignore -- indicates that the reference is skipped
+#     strict -- indicates that the resolver should throw a CatalogException
+#
+# The following setting allows the resolution to continue in cases where
+# external references are not resolved by a user-defined resolver or catalog if
+# any, and the built-in Catalog:
+jdk.xml.jdkcatalog.resolve=continue
+#
+# Implementation Specific Properties - DTD
+#
+# This property instructs the parsers to deny, ignore or allow DTD processing.
+# The following setting causes the parser to reject DTDs by throwing an exception.
+# jdk.xml.dtd.support=deny
+#
+# The following setting permits the processor to continue processing DTDs
+jdk.xml.dtd.support=allow
+#
+# Implementation Specific Properties - Limits
+#
+# Limits have a value type Integer. The values must be positive integers. Zero
+# means no limit.
+#
+# Limits the number of entity expansions. The default value is 2500
+jdk.xml.entityExpansionLimit=2500
+#
+# Limits the total size of all entities that include general and parameter entities.
+# The size is calculated as an aggregation of all entities. The default value is 100000.
+jdk.xml.totalEntitySizeLimit=100000
+#
+# Limits the maximum size of any general entities. The default value is 100000.
+jdk.xml.maxGeneralEntitySizeLimit=100000
+#
+# Limits the maximum size of any parameter entities, including the result of
+# nesting multiple parameter entities. The default value is 15000.
+jdk.xml.maxParameterEntitySizeLimit=15000
+#
+# Limits the total number of nodes in all entity references. The default value is 100000.
+jdk.xml.entityReplacementLimit=100000
+#
+# Limits the number of attributes an element can have. The default value is 200.
+jdk.xml.elementAttributeLimit=200
+#
+# Limits the number of content model nodes that may be created when building a
+# grammar for a W3C XML Schema that contains maxOccurs attributes with values
+# other than "unbounded". The default value is 5000.
+jdk.xml.maxOccurLimit=5000
+#
+# Limits the maximum element depth. The default value is 100.
+jdk.xml.maxElementDepth=100
+#
+# Limits the maximum size of XML names, including element name, attribute name
+# and namespace prefix and URI. The default value is 1000.
+jdk.xml.maxXMLNameLimit=1000
+#
+#
+# XPath Limits
+#
+# Limits the number of groups an XPath expression can contain. The default value is 10.
+jdk.xml.xpathExprGrpLimit=10
+#
+# Limits the number of operators an XPath expression can contain. The default value is 100.
+jdk.xml.xpathExprOpLimit=100
+#
+# Limits the total number of XPath operators in an XSL Stylesheet. The default value is 10000.
+jdk.xml.xpathTotalOpLimit=10000

quarchpy/connection_specific/jdk_jres/lin_amd64_jdk_jre/conf/logging.properties

@@ -0,0 +1,63 @@
+############################################################
+#       Default Logging Configuration File
+#
+# You can use a different file by specifying a filename
+# with the java.util.logging.config.file system property.
+# For example, java -Djava.util.logging.config.file=myfile
+############################################################
+
+############################################################
+#       Global properties
+############################################################
+
+# "handlers" specifies a comma-separated list of log Handler
+# classes.  These handlers will be installed during VM startup.
+# Note that these classes must be on the system classpath.
+# By default we only configure a ConsoleHandler, which will only
+# show messages at the INFO and above levels.
+handlers= java.util.logging.ConsoleHandler
+
+# To also add the FileHandler, use the following line instead.
+#handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler
+
+# Default global logging level.
+# This specifies which kinds of events are logged across
+# all loggers.  For any given facility this global level
+# can be overridden by a facility-specific level
+# Note that the ConsoleHandler also has a separate level
+# setting to limit messages printed to the console.
+.level= INFO
+
+############################################################
+# Handler specific properties.
+# Describes specific configuration info for Handlers.
+############################################################
+
+# default file output is in user's home directory.
+java.util.logging.FileHandler.pattern = %h/java%u.log
+java.util.logging.FileHandler.limit = 50000
+java.util.logging.FileHandler.count = 1
+# Default number of locks FileHandler can obtain synchronously.
+# This specifies maximum number of attempts to obtain lock file by FileHandler
+# implemented by incrementing the unique field %u as per FileHandler API documentation.
+java.util.logging.FileHandler.maxLocks = 100
+java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter
+
+# Limit the messages that are printed on the console to INFO and above.
+java.util.logging.ConsoleHandler.level = INFO
+java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter
+
+# Example to customize the SimpleFormatter output format
+# to print one-line log message like this:
+#     <level>: <log message> [<date/time>]
+#
+# java.util.logging.SimpleFormatter.format=%4$s: %5$s [%1$tc]%n
+
+############################################################
+# Facility-specific properties.
+# Provides extra control for each logger.
+############################################################
+
+# For example, set the com.xyz.foo logger to only log SEVERE
+# messages:
+# com.xyz.foo.level = SEVERE

quarchpy/connection_specific/jdk_jres/lin_amd64_jdk_jre/conf/management/management.properties

@@ -0,0 +1,326 @@
+#####################################################################
+#       Default Configuration File for Java Platform Management
+#####################################################################
+#
+# The Management Configuration file (in java.util.Properties format)
+# will be read if one of the following system properties is set:
+#    -Dcom.sun.management.jmxremote.port=<port-number>
+# or -Dcom.sun.management.config.file=<this-file>
+#
+# The default Management Configuration file is:
+#
+#       $JRE/conf/management/management.properties
+#
+# Another location for the Management Configuration File can be specified
+# by the following property on the Java command line:
+#
+#    -Dcom.sun.management.config.file=<this-file>
+#
+# If -Dcom.sun.management.config.file=<this-file> is set, the port
+# number for the management agent can be specified in the config file
+# using the following lines:
+#
+# ################ Management Agent Port #########################
+#
+# For setting the JMX RMI agent port use the following line
+# com.sun.management.jmxremote.port=<port-number>
+#
+# For setting the JMX local server port use the following line
+# com.sun.management.jmxremote.local.port=<port-number>
+
+#####################################################################
+#                   Optional Instrumentation
+#####################################################################
+#
+# By default only the basic instrumentation with low overhead is on.
+# The following properties allow to selectively turn on optional
+# instrumentation which are off by default and may have some
+# additional overhead.
+#
+# com.sun.management.enableThreadContentionMonitoring
+#
+#      This option enables thread contention monitoring if the
+#      Java virtual machine supports such instrumentation.
+#      Refer to the specification for the java.lang.management.ThreadMXBean
+#      interface - see isThreadContentionMonitoringSupported() method.
+#
+
+# To enable thread contention monitoring, uncomment the following line
+# com.sun.management.enableThreadContentionMonitoring
+
+#####################################################################
+#                       RMI Management Properties
+#####################################################################
+#
+# If system property -Dcom.sun.management.jmxremote.port=<port-number>
+# is set then
+#     - A MBean server is started
+#     - JRE Platform MBeans are registered in the MBean server
+#     - RMI connector is published  in a private readonly registry at
+#       specified port using a well known name, "jmxrmi"
+#     - the following properties are read for JMX remote management.
+#
+# The configuration can be specified only at startup time.
+# Later changes to above system property (e.g. via setProperty method),
+# this config file, the password file, or the access file have no effect to the
+# running MBean server, the connector, or the registry.
+#
+
+#
+# ########## RMI connector settings for local management ##########
+#
+# com.sun.management.jmxremote.local.only=true|false
+#      Default for this property is true. (Case for true/false ignored)
+#      If this property is specified as true then the local JMX RMI connector
+#      server will only accept connection requests from clients running on
+#      the host where the out-of-the-box JMX management agent is running.
+#      In order to ensure backwards compatibility this property could be
+#      set to false. However, deploying the local management agent in this
+#      way is discouraged because the local JMX RMI connector server will
+#      accept connection requests from any client either local or remote.
+#      For remote management the remote JMX RMI connector server should
+#      be used instead with authentication and SSL/TLS encryption enabled.
+#
+
+# For allowing the local management agent accept local
+# and remote connection requests use the following line
+# com.sun.management.jmxremote.local.only=false
+
+#
+# ###################### RMI SSL #############################
+#
+# com.sun.management.jmxremote.ssl=true|false
+#      Default for this property is true. (Case for true/false ignored)
+#      If this property is specified as false then SSL is not used.
+#
+
+# For RMI monitoring without SSL use the following line
+# com.sun.management.jmxremote.ssl=false
+
+# com.sun.management.jmxremote.ssl.config.file=filepath
+#      Specifies the location of the SSL configuration file. A properties
+#      file can be used to supply the keystore and truststore location and
+#      password settings thus avoiding to pass them as cleartext in the
+#      command-line.
+#
+#      The current implementation of the out-of-the-box management agent will
+#      look up and use the properties specified below to configure the SSL
+#      keystore and truststore, if present:
+#          javax.net.ssl.keyStore=<keystore-location>
+#          javax.net.ssl.keyStorePassword=<keystore-password>
+#          javax.net.ssl.trustStore=<truststore-location>
+#          javax.net.ssl.trustStorePassword=<truststore-password>
+#      Any other properties in the file will be ignored. This will allow us
+#      to extend the property set in the future if required by the default
+#      SSL implementation.
+#
+#      If the property "com.sun.management.jmxremote.ssl" is set to false,
+#      then this property is ignored.
+#
+
+# For supplying the keystore settings in a file use the following line
+# com.sun.management.jmxremote.ssl.config.file=filepath
+
+# com.sun.management.jmxremote.ssl.enabled.cipher.suites=<cipher-suites>
+#      The value of this property is a string that is a comma-separated list
+#      of SSL/TLS cipher suites to enable. This property can be specified in
+#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
+#      in order to control which particular SSL/TLS cipher suites are enabled
+#      for use by accepted connections. If this property is not specified then
+#      the SSL/TLS RMI Server Socket Factory uses the SSL/TLS cipher suites that
+#      are enabled by default.
+#
+
+# com.sun.management.jmxremote.ssl.enabled.protocols=<protocol-versions>
+#      The value of this property is a string that is a comma-separated list
+#      of SSL/TLS protocol versions to enable. This property can be specified in
+#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
+#      in order to control which particular SSL/TLS protocol versions are
+#      enabled for use by accepted connections. If this property is not
+#      specified then the SSL/TLS RMI Server Socket Factory uses the SSL/TLS
+#      protocol versions that are enabled by default.
+#
+
+# com.sun.management.jmxremote.ssl.need.client.auth=true|false
+#      Default for this property is false. (Case for true/false ignored)
+#      If this property is specified as true in conjunction with the previous
+#      property "com.sun.management.jmxremote.ssl" then the SSL/TLS RMI Server
+#      Socket Factory will require client authentication.
+#
+
+# For RMI monitoring with SSL client authentication use the following line
+# com.sun.management.jmxremote.ssl.need.client.auth=true
+
+# com.sun.management.jmxremote.registry.ssl=true|false
+#      Default for this property is false. (Case for true/false ignored)
+#      If this property is specified as true then the RMI registry used
+#      to bind the RMIServer remote object is protected with SSL/TLS
+#      RMI Socket Factories that can be configured with the properties:
+#          com.sun.management.jmxremote.ssl.config.file
+#          com.sun.management.jmxremote.ssl.enabled.cipher.suites
+#          com.sun.management.jmxremote.ssl.enabled.protocols
+#          com.sun.management.jmxremote.ssl.need.client.auth
+#      If the two properties below are true at the same time, i.e.
+#          com.sun.management.jmxremote.ssl=true
+#          com.sun.management.jmxremote.registry.ssl=true
+#      then the RMIServer remote object and the RMI registry are
+#      both exported with the same SSL/TLS RMI Socket Factories.
+#
+
+# For using an SSL/TLS protected RMI registry use the following line
+# com.sun.management.jmxremote.registry.ssl=true
+
+#
+# ################ RMI User authentication ################
+#
+# com.sun.management.jmxremote.authenticate=true|false
+#      Default for this property is true. (Case for true/false ignored)
+#      If this property is specified as false then no authentication is
+#      performed and all users are allowed all access.
+#
+
+# For RMI monitoring without any checking use the following line
+# com.sun.management.jmxremote.authenticate=false
+
+#
+# ################ RMI Login configuration ###################
+#
+# com.sun.management.jmxremote.login.config=<config-name>
+#      Specifies the name of a JAAS login configuration entry to use when
+#      authenticating users of RMI monitoring.
+#
+#      Setting this property is optional - the default login configuration
+#      specifies a file-based authentication that uses the password file.
+#
+#      When using this property to override the default login configuration
+#      then the named configuration entry must be in a file that gets loaded
+#      by JAAS. In addition, the login module(s) specified in the configuration
+#      should use the name and/or password callbacks to acquire the user's
+#      credentials. See the NameCallback and PasswordCallback classes in the
+#      javax.security.auth.callback package for more details.
+#
+#      If the property "com.sun.management.jmxremote.authenticate" is set to
+#      false, then this property and the password & access files are ignored.
+#
+
+# For a non-default login configuration use the following line
+# com.sun.management.jmxremote.login.config=<config-name>
+
+#
+# ################ RMI Password file location ##################
+#
+# com.sun.management.jmxremote.password.file=filepath
+#      Specifies location for password file
+#      This is optional - default location is
+#      $JRE/conf/management/jmxremote.password
+#
+#      If the property "com.sun.management.jmxremote.authenticate" is set to
+#      false, then this property and the password & access files are ignored.
+#      Otherwise the password file must exist and be in the valid format.
+#      If the password file is empty or non-existent then no access is allowed.
+#
+
+# For a non-default password file location use the following line
+# com.sun.management.jmxremote.password.file=filepath
+
+#
+# ################# Hash passwords in password file ##############
+# com.sun.management.jmxremote.password.toHashes = true|false
+#      Default for this property is true.
+#      Specifies if passwords in the password file should be hashed or not.
+#      If this property is true, and if the password file is writable, and if the
+#      system security policy allows writing into the password file,
+#      all the clear passwords in the password file will be replaced by
+#      their SHA3-512 hash when the file is read by the server
+#
+
+#
+# ################ RMI Access file location #####################
+#
+# com.sun.management.jmxremote.access.file=filepath
+#      Specifies location for access  file
+#      This is optional - default location is
+#      $JRE/conf/management/jmxremote.access
+#
+#      If the property "com.sun.management.jmxremote.authenticate" is set to
+#      false, then this property and the password & access files are ignored.
+#      Otherwise, the access file must exist and be in the valid format.
+#      If the access file is empty or non-existent then no access is allowed.
+#
+
+# For a non-default password file location use the following line
+# com.sun.management.jmxremote.access.file=filepath
+#
+
+# ################ Management agent listen interface #########################
+#
+# com.sun.management.jmxremote.host=<host-name-or-address>
+#      The local host name or IP address on which the JMX RMI agent will bind.
+#      This is useful when running on machines which have several
+#      interfaces defined. It makes it possible to listen to a specific
+#      subnet accessible through that interface.
+#
+#      The format of the value for that property is any string accepted
+#      by java.net.InetAddress.getByName(String).
+#
+
+# ################ Filter for ObjectInputStream #############################
+# com.sun.management.jmxremote.serial.filter.pattern=<filter-string>
+#   A filter, if configured, is used by java.io.ObjectInputStream during
+#   deserialization of parameters sent to the JMX default agent to validate the
+#   contents of the stream.
+#   A filter is configured as a sequence of patterns, each pattern is either
+#   matched against the name of a class in the stream or defines a limit.
+#   Patterns are separated by ";" (semicolon).
+#   Whitespace is significant and is considered part of the pattern.
+#
+#   If a pattern includes a "=", it sets a limit.
+#   If a limit appears more than once the last value is used.
+#   Limits are checked before classes regardless of the order in the sequence of patterns.
+#   If any of the limits are exceeded, the filter status is REJECTED.
+#
+#       maxdepth=value - the maximum depth of a graph
+#       maxrefs=value  - the maximum number of internal references
+#       maxbytes=value - the maximum number of bytes in the input stream
+#       maxarray=value - the maximum array length allowed
+#
+#   Other patterns, from left to right, match the class or package name as
+#   returned from Class.getName.
+#   If the class is an array type, the class or package to be matched is the element type.
+#   Arrays of any number of dimensions are treated the same as the element type.
+#   For example, a pattern of "!example.Foo", rejects creation of any instance or
+#   array of example.Foo.
+#
+#   If the pattern starts with "!", the status is REJECTED if the remaining pattern
+#       is matched; otherwise the status is ALLOWED if the pattern matches.
+#   If the pattern contains "/", the non-empty prefix up to the "/" is the module name;
+#       if the module name matches the module name of the class then
+#       the remaining pattern is matched with the class name.
+#   If there is no "/", the module name is not compared.
+#   If the pattern ends with ".**" it matches any class in the package and all subpackages.
+#   If the pattern ends with ".*" it matches any class in the package.
+#   If the pattern ends with "*", it matches any class with the pattern as a prefix.
+#   If the pattern is equal to the class name, it matches.
+#   Otherwise, the status is UNDECIDED.
+#
+#   Ending with !* ensures we reject classes which are otherwise unmatched.
+com.sun.management.jmxremote.serial.filter.pattern=\
+java.lang.*;\
+java.lang.reflect.Proxy;\
+java.math.BigInteger;\
+java.math.BigDecimal;\
+java.util.*;\
+javax.management.*;\
+javax.management.modelmbean.*;\
+javax.management.monitor.*;\
+javax.management.openmbean.*;\
+javax.management.relation.*;\
+javax.management.remote.*;\
+javax.management.remote.rmi.*;\
+javax.management.timer.*;\
+javax.rmi.ssl.*;\
+java.rmi.MarshalledObject;\
+java.rmi.dgc.*;\
+java.rmi.server.*;\
+javax.security.auth.Subject;\
+!*