quarchpy 2.2.11__py2.py3-none-any.whl → 2.2.12.dev1__py2.py3-none-any.whl

quarchpy/connection_specific/jdk_jres/mac_amd64_jdk_jre/conf/jaxp.properties

@@ -1,200 +1,200 @@
-################################################################################
-#           JAXP Configuration File
-#
-# jaxp.properties (this file) is the default configuration file for JAXP, the API
-# defined in the java.xml module. It is in java.util.Properties format and typically
-# located in the {java.home}/conf directory. It may contain key/value pairs for
-# specifying the implementation classes of JAXP factories and/or properties
-# that have corresponding system properties.
-#
-# A user-specified configuration file can be set up using the system property
-# java.xml.config.file to override any or all of the entries in jaxp.properties.
-# The following statement provides myConfigurationFile as a custom configuration
-# file:
-#     java -Djava.xml.config.file=myConfigurationFile
-################################################################################
-
-# ---- JAXP Default Configuration ----
-#
-# The JAXP default configuration (jaxp.properties) contains entries for the
-# Factory Lookup Mechanism and properties with corresponding system properties.
-# The values are generally set to the default values of the properties.
-#
-#
-# JAXP Lookup Mechanism:
-#
-# The JAXP configuration file ranks 2nd to the System Property in the precedent
-# order of the JAXP Lookup Mechanism. When the System Property is not specified,
-# a JAXP factory reads the configuration file in order to locate an implementation
-# class. If found, the class specified will be used as the factory implementation
-# class.
-#
-# The format of an entry is key=value where the key is the fully qualified name
-# of the factory and value that of the implementation class. The following entry
-# sets a DocumentBuilderFactory implementation class:
-#
-# javax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-#
-#
-# Java SE and JDK Implementation Specific Properties:
-#
-# The JAXP configuration file ranks above the default settings in the Property
-# Precedence in that its entries will override the default values of the corresponding
-# properties.
-#
-# All properties that have System Properties defined in Java SE or supported
-# by the JDK Implementation can be placed in the configuration file to override
-# the default property values. The format is:
-#     system-property-name=value
-#
-# For example, the RESOLVE property in CatalogFeatures has an associated system
-# property called javax.xml.catalog.resolve. An entry for the RESOLVE property in the
-# configuration file therefore uses javax.xml.catalog.resolve as the key, that
-# is:
-#     javax.xml.catalog.resolve=strict
-#
-#
-# Extension Functions:
-#
-# This property determines whether XSLT and XPath extension functions are allowed.
-# The value type is boolean and the default value is false (disallowing
-# extension functions).
-#
-jdk.xml.enableExtensionFunctions=false
-#
-#
-# Overriding the default parser:
-#
-# This property allows a third party implementation to override the default
-# parser provided by the JDK. The value type is boolean and the default value is
-# false, disallowing overriding the default parser. The setting below reflects
-# the default property setting:
-#
-jdk.xml.overrideDefaultParser=false
-#
-#
-# External Access Properties:
-#
-# The External Access Properties are defined in javax.xml.XMLConstants. Their
-# system properties are javax.xml.accessExternalDTD, javax.xml.accessExternalSchema,
-# and javax.xml.accessExternalStylesheet. The values are a list of protocols separated
-# by comma, plus empty string ("") to represent no protocol allowed and the key
-# word "all" for all access. The default is "all", allowing all external resources
-# to be fetched. The followings are example of external access settings:
-#
-# allow local (file) DTDs to be retrieved
-# javax.xml.accessExternalDTD=file
-#
-# allow local (file) and remote (http) external schemas
-# javax.xml.accessExternalSchema=file, http
-#
-# reject any external stylesheets
-# javax.xml.accessExternalStylesheet=""
-#
-# allow all external stylesheets
-# javax.xml.accessExternalStylesheet="all"
-#
-#
-# Catalog Properties:
-#
-# The Catalog API defines four features: FILES, PREFER, DEFER and RESOLVE.
-# Except PREFER, all other properties can be placed in the configuration file
-# using the system properties defined for them.
-#
-# FILES: A semicolon-delimited list of URIs to locate the catalog files. The URIs
-# must be absolute and have a URL protocol handler for the URI scheme. The following
-# is an example of setting up a catalog file:
-#
-# javax.xml.catalog.files = file:///users/auser/catalog/catalog.xml
-#
-# DEFER: Indicates that the alternative catalogs including those specified in
-# delegate entries or nextCatalog are not read until they are needed. The value
-# is a boolean and the default value is true.
-#
-# javax.xml.catalog.defer=true
-#
-# RESOLVE: Determines the action if there is no matching entry found after all of
-# the specified catalogs are exhausted. The values are key words: strict, continue,
-# and ignore. The default is strict. The following setting reflects the default
-# setting.
-#
-# javax.xml.catalog.resolve=strict
-#
-#
-# useCatalog:
-# This property instructs XML processors to use XML Catalogs to resolve entity
-# references. The value is a boolean and the default value is true.
-#
-# javax.xml.useCatalog=true
-#
-# Implementation Specific Properties - jdkcatalog.resolve
-#
-# This property instructs the JDK default CatalogResolver to act in accordance with
-# the setting when unable to resolve an external reference with the built-in Catalog.
-# The options are:
-#     continue -- indicates that the processing should continue
-#     ignore -- indicates that the reference is skipped
-#     strict -- indicates that the resolver should throw a CatalogException
-#
-# The following setting allows the resolution to continue in cases where
-# external references are not resolved by a user-defined resolver or catalog if
-# any, and the built-in Catalog:
-jdk.xml.jdkcatalog.resolve=continue
-#
-# Implementation Specific Properties - DTD
-#
-# This property instructs the parsers to deny, ignore or allow DTD processing.
-# The following setting causes the parser to reject DTDs by throwing an exception.
-# jdk.xml.dtd.support=deny
-#
-# The following setting permits the processor to continue processing DTDs
-jdk.xml.dtd.support=allow
-#
-# Implementation Specific Properties - Limits
-#
-# Limits have a value type Integer. The values must be positive integers. Zero
-# means no limit.
-#
-# Limits the number of entity expansions. The default value is 2500
-jdk.xml.entityExpansionLimit=2500
-#
-# Limits the total size of all entities that include general and parameter entities.
-# The size is calculated as an aggregation of all entities. The default value is 100000.
-jdk.xml.totalEntitySizeLimit=100000
-#
-# Limits the maximum size of any general entities. The default value is 100000.
-jdk.xml.maxGeneralEntitySizeLimit=100000
-#
-# Limits the maximum size of any parameter entities, including the result of
-# nesting multiple parameter entities. The default value is 15000.
-jdk.xml.maxParameterEntitySizeLimit=15000
-#
-# Limits the total number of nodes in all entity references. The default value is 100000.
-jdk.xml.entityReplacementLimit=100000
-#
-# Limits the number of attributes an element can have. The default value is 200.
-jdk.xml.elementAttributeLimit=200
-#
-# Limits the number of content model nodes that may be created when building a
-# grammar for a W3C XML Schema that contains maxOccurs attributes with values
-# other than "unbounded". The default value is 5000.
-jdk.xml.maxOccurLimit=5000
-#
-# Limits the maximum element depth. The default value is 100.
-jdk.xml.maxElementDepth=100
-#
-# Limits the maximum size of XML names, including element name, attribute name
-# and namespace prefix and URI. The default value is 1000.
-jdk.xml.maxXMLNameLimit=1000
-#
-#
-# XPath Limits
-#
-# Limits the number of groups an XPath expression can contain. The default value is 10.
-jdk.xml.xpathExprGrpLimit=10
-#
-# Limits the number of operators an XPath expression can contain. The default value is 100.
-jdk.xml.xpathExprOpLimit=100
-#
-# Limits the total number of XPath operators in an XSL Stylesheet. The default value is 10000.
-jdk.xml.xpathTotalOpLimit=10000
+################################################################################
+#           JAXP Configuration File
+#
+# jaxp.properties (this file) is the default configuration file for JAXP, the API
+# defined in the java.xml module. It is in java.util.Properties format and typically
+# located in the {java.home}/conf directory. It may contain key/value pairs for
+# specifying the implementation classes of JAXP factories and/or properties
+# that have corresponding system properties.
+#
+# A user-specified configuration file can be set up using the system property
+# java.xml.config.file to override any or all of the entries in jaxp.properties.
+# The following statement provides myConfigurationFile as a custom configuration
+# file:
+#     java -Djava.xml.config.file=myConfigurationFile
+################################################################################
+
+# ---- JAXP Default Configuration ----
+#
+# The JAXP default configuration (jaxp.properties) contains entries for the
+# Factory Lookup Mechanism and properties with corresponding system properties.
+# The values are generally set to the default values of the properties.
+#
+#
+# JAXP Lookup Mechanism:
+#
+# The JAXP configuration file ranks 2nd to the System Property in the precedent
+# order of the JAXP Lookup Mechanism. When the System Property is not specified,
+# a JAXP factory reads the configuration file in order to locate an implementation
+# class. If found, the class specified will be used as the factory implementation
+# class.
+#
+# The format of an entry is key=value where the key is the fully qualified name
+# of the factory and value that of the implementation class. The following entry
+# sets a DocumentBuilderFactory implementation class:
+#
+# javax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
+#
+#
+# Java SE and JDK Implementation Specific Properties:
+#
+# The JAXP configuration file ranks above the default settings in the Property
+# Precedence in that its entries will override the default values of the corresponding
+# properties.
+#
+# All properties that have System Properties defined in Java SE or supported
+# by the JDK Implementation can be placed in the configuration file to override
+# the default property values. The format is:
+#     system-property-name=value
+#
+# For example, the RESOLVE property in CatalogFeatures has an associated system
+# property called javax.xml.catalog.resolve. An entry for the RESOLVE property in the
+# configuration file therefore uses javax.xml.catalog.resolve as the key, that
+# is:
+#     javax.xml.catalog.resolve=strict
+#
+#
+# Extension Functions:
+#
+# This property determines whether XSLT and XPath extension functions are allowed.
+# The value type is boolean and the default value is false (disallowing
+# extension functions).
+#
+jdk.xml.enableExtensionFunctions=false
+#
+#
+# Overriding the default parser:
+#
+# This property allows a third party implementation to override the default
+# parser provided by the JDK. The value type is boolean and the default value is
+# false, disallowing overriding the default parser. The setting below reflects
+# the default property setting:
+#
+jdk.xml.overrideDefaultParser=false
+#
+#
+# External Access Properties:
+#
+# The External Access Properties are defined in javax.xml.XMLConstants. Their
+# system properties are javax.xml.accessExternalDTD, javax.xml.accessExternalSchema,
+# and javax.xml.accessExternalStylesheet. The values are a list of protocols separated
+# by comma, plus empty string ("") to represent no protocol allowed and the key
+# word "all" for all access. The default is "all", allowing all external resources
+# to be fetched. The followings are example of external access settings:
+#
+# allow local (file) DTDs to be retrieved
+# javax.xml.accessExternalDTD=file
+#
+# allow local (file) and remote (http) external schemas
+# javax.xml.accessExternalSchema=file, http
+#
+# reject any external stylesheets
+# javax.xml.accessExternalStylesheet=""
+#
+# allow all external stylesheets
+# javax.xml.accessExternalStylesheet="all"
+#
+#
+# Catalog Properties:
+#
+# The Catalog API defines four features: FILES, PREFER, DEFER and RESOLVE.
+# Except PREFER, all other properties can be placed in the configuration file
+# using the system properties defined for them.
+#
+# FILES: A semicolon-delimited list of URIs to locate the catalog files. The URIs
+# must be absolute and have a URL protocol handler for the URI scheme. The following
+# is an example of setting up a catalog file:
+#
+# javax.xml.catalog.files = file:///users/auser/catalog/catalog.xml
+#
+# DEFER: Indicates that the alternative catalogs including those specified in
+# delegate entries or nextCatalog are not read until they are needed. The value
+# is a boolean and the default value is true.
+#
+# javax.xml.catalog.defer=true
+#
+# RESOLVE: Determines the action if there is no matching entry found after all of
+# the specified catalogs are exhausted. The values are key words: strict, continue,
+# and ignore. The default is strict. The following setting reflects the default
+# setting.
+#
+# javax.xml.catalog.resolve=strict
+#
+#
+# useCatalog:
+# This property instructs XML processors to use XML Catalogs to resolve entity
+# references. The value is a boolean and the default value is true.
+#
+# javax.xml.useCatalog=true
+#
+# Implementation Specific Properties - jdkcatalog.resolve
+#
+# This property instructs the JDK default CatalogResolver to act in accordance with
+# the setting when unable to resolve an external reference with the built-in Catalog.
+# The options are:
+#     continue -- indicates that the processing should continue
+#     ignore -- indicates that the reference is skipped
+#     strict -- indicates that the resolver should throw a CatalogException
+#
+# The following setting allows the resolution to continue in cases where
+# external references are not resolved by a user-defined resolver or catalog if
+# any, and the built-in Catalog:
+jdk.xml.jdkcatalog.resolve=continue
+#
+# Implementation Specific Properties - DTD
+#
+# This property instructs the parsers to deny, ignore or allow DTD processing.
+# The following setting causes the parser to reject DTDs by throwing an exception.
+# jdk.xml.dtd.support=deny
+#
+# The following setting permits the processor to continue processing DTDs
+jdk.xml.dtd.support=allow
+#
+# Implementation Specific Properties - Limits
+#
+# Limits have a value type Integer. The values must be positive integers. Zero
+# means no limit.
+#
+# Limits the number of entity expansions. The default value is 2500
+jdk.xml.entityExpansionLimit=2500
+#
+# Limits the total size of all entities that include general and parameter entities.
+# The size is calculated as an aggregation of all entities. The default value is 100000.
+jdk.xml.totalEntitySizeLimit=100000
+#
+# Limits the maximum size of any general entities. The default value is 100000.
+jdk.xml.maxGeneralEntitySizeLimit=100000
+#
+# Limits the maximum size of any parameter entities, including the result of
+# nesting multiple parameter entities. The default value is 15000.
+jdk.xml.maxParameterEntitySizeLimit=15000
+#
+# Limits the total number of nodes in all entity references. The default value is 100000.
+jdk.xml.entityReplacementLimit=100000
+#
+# Limits the number of attributes an element can have. The default value is 200.
+jdk.xml.elementAttributeLimit=200
+#
+# Limits the number of content model nodes that may be created when building a
+# grammar for a W3C XML Schema that contains maxOccurs attributes with values
+# other than "unbounded". The default value is 5000.
+jdk.xml.maxOccurLimit=5000
+#
+# Limits the maximum element depth. The default value is 100.
+jdk.xml.maxElementDepth=100
+#
+# Limits the maximum size of XML names, including element name, attribute name
+# and namespace prefix and URI. The default value is 1000.
+jdk.xml.maxXMLNameLimit=1000
+#
+#
+# XPath Limits
+#
+# Limits the number of groups an XPath expression can contain. The default value is 10.
+jdk.xml.xpathExprGrpLimit=10
+#
+# Limits the number of operators an XPath expression can contain. The default value is 100.
+jdk.xml.xpathExprOpLimit=100
+#
+# Limits the total number of XPath operators in an XSL Stylesheet. The default value is 10000.
+jdk.xml.xpathTotalOpLimit=10000

quarchpy/connection_specific/jdk_jres/mac_amd64_jdk_jre/conf/logging.properties

@@ -1,63 +1,63 @@
-############################################################
-#       Default Logging Configuration File
-#
-# You can use a different file by specifying a filename
-# with the java.util.logging.config.file system property.
-# For example, java -Djava.util.logging.config.file=myfile
-############################################################
-
-############################################################
-#       Global properties
-############################################################
-
-# "handlers" specifies a comma-separated list of log Handler
-# classes.  These handlers will be installed during VM startup.
-# Note that these classes must be on the system classpath.
-# By default we only configure a ConsoleHandler, which will only
-# show messages at the INFO and above levels.
-handlers= java.util.logging.ConsoleHandler
-
-# To also add the FileHandler, use the following line instead.
-#handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler
-
-# Default global logging level.
-# This specifies which kinds of events are logged across
-# all loggers.  For any given facility this global level
-# can be overridden by a facility-specific level
-# Note that the ConsoleHandler also has a separate level
-# setting to limit messages printed to the console.
-.level= INFO
-
-############################################################
-# Handler specific properties.
-# Describes specific configuration info for Handlers.
-############################################################
-
-# default file output is in user's home directory.
-java.util.logging.FileHandler.pattern = %h/java%u.log
-java.util.logging.FileHandler.limit = 50000
-java.util.logging.FileHandler.count = 1
-# Default number of locks FileHandler can obtain synchronously.
-# This specifies maximum number of attempts to obtain lock file by FileHandler
-# implemented by incrementing the unique field %u as per FileHandler API documentation.
-java.util.logging.FileHandler.maxLocks = 100
-java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter
-
-# Limit the messages that are printed on the console to INFO and above.
-java.util.logging.ConsoleHandler.level = INFO
-java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter
-
-# Example to customize the SimpleFormatter output format
-# to print one-line log message like this:
-#     <level>: <log message> [<date/time>]
-#
-# java.util.logging.SimpleFormatter.format=%4$s: %5$s [%1$tc]%n
-
-############################################################
-# Facility-specific properties.
-# Provides extra control for each logger.
-############################################################
-
-# For example, set the com.xyz.foo logger to only log SEVERE
-# messages:
-# com.xyz.foo.level = SEVERE
+############################################################
+#       Default Logging Configuration File
+#
+# You can use a different file by specifying a filename
+# with the java.util.logging.config.file system property.
+# For example, java -Djava.util.logging.config.file=myfile
+############################################################
+
+############################################################
+#       Global properties
+############################################################
+
+# "handlers" specifies a comma-separated list of log Handler
+# classes.  These handlers will be installed during VM startup.
+# Note that these classes must be on the system classpath.
+# By default we only configure a ConsoleHandler, which will only
+# show messages at the INFO and above levels.
+handlers= java.util.logging.ConsoleHandler
+
+# To also add the FileHandler, use the following line instead.
+#handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler
+
+# Default global logging level.
+# This specifies which kinds of events are logged across
+# all loggers.  For any given facility this global level
+# can be overridden by a facility-specific level
+# Note that the ConsoleHandler also has a separate level
+# setting to limit messages printed to the console.
+.level= INFO
+
+############################################################
+# Handler specific properties.
+# Describes specific configuration info for Handlers.
+############################################################
+
+# default file output is in user's home directory.
+java.util.logging.FileHandler.pattern = %h/java%u.log
+java.util.logging.FileHandler.limit = 50000
+java.util.logging.FileHandler.count = 1
+# Default number of locks FileHandler can obtain synchronously.
+# This specifies maximum number of attempts to obtain lock file by FileHandler
+# implemented by incrementing the unique field %u as per FileHandler API documentation.
+java.util.logging.FileHandler.maxLocks = 100
+java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter
+
+# Limit the messages that are printed on the console to INFO and above.
+java.util.logging.ConsoleHandler.level = INFO
+java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter
+
+# Example to customize the SimpleFormatter output format
+# to print one-line log message like this:
+#     <level>: <log message> [<date/time>]
+#
+# java.util.logging.SimpleFormatter.format=%4$s: %5$s [%1$tc]%n
+
+############################################################
+# Facility-specific properties.
+# Provides extra control for each logger.
+############################################################
+
+# For example, set the com.xyz.foo logger to only log SEVERE
+# messages:
+# com.xyz.foo.level = SEVERE