quarchpy 2.1.24.dev4__py2.py3-none-any.whl → 2.1.24.dev5__py2.py3-none-any.whl

quarchpy/connection_specific/jdk-j21-jres/win-amd64-jdk-21-jre/conf/management/management.properties

@@ -1,327 +0,0 @@
-#####################################################################
-#	Default Configuration File for Java Platform Management
-#####################################################################
-#
-# The Management Configuration file (in java.util.Properties format)
-# will be read if one of the following system properties is set:
-#    -Dcom.sun.management.jmxremote.port=<port-number>
-# or -Dcom.sun.management.config.file=<this-file>
-#
-# The default Management Configuration file is:
-#
-#       $JRE/conf/management/management.properties
-#
-# Another location for the Management Configuration File can be specified
-# by the following property on the Java command line:
-#
-#    -Dcom.sun.management.config.file=<this-file>
-#
-# If -Dcom.sun.management.config.file=<this-file> is set, the port
-# number for the management agent can be specified in the config file
-# using the following lines:
-#
-# ################ Management Agent Port #########################
-#
-# For setting the JMX RMI agent port use the following line
-# com.sun.management.jmxremote.port=<port-number>
-#
-# For setting the JMX local server port use the following line
-# com.sun.management.jmxremote.local.port=<port-number>
-
-#####################################################################
-#                   Optional Instrumentation
-#####################################################################
-#
-# By default only the basic instrumentation with low overhead is on.
-# The following properties allow to selectively turn on optional
-# instrumentation which are off by default and may have some
-# additional overhead.
-#
-# com.sun.management.enableThreadContentionMonitoring
-#
-#      This option enables thread contention monitoring if the
-#      Java virtual machine supports such instrumentation.
-#      Refer to the specification for the java.lang.management.ThreadMXBean
-#      interface - see isThreadContentionMonitoringSupported() method.
-#
-
-# To enable thread contention monitoring, uncomment the following line
-# com.sun.management.enableThreadContentionMonitoring
-
-#####################################################################
-#			RMI Management Properties
-#####################################################################
-#
-# If system property -Dcom.sun.management.jmxremote.port=<port-number>
-# is set then
-#     - A MBean server is started
-#     - JRE Platform MBeans are registered in the MBean server
-#     - RMI connector is published  in a private readonly registry at
-#       specified port using a well known name, "jmxrmi"
-#     - the following properties are read for JMX remote management.
-#
-# The configuration can be specified only at startup time.
-# Later changes to above system property (e.g. via setProperty method),
-# this config file, the password file, or the access file have no effect to the
-# running MBean server, the connector, or the registry.
-#
-
-#
-# ########## RMI connector settings for local management ##########
-#
-# com.sun.management.jmxremote.local.only=true|false
-#      Default for this property is true. (Case for true/false ignored)
-#      If this property is specified as true then the local JMX RMI connector
-#      server will only accept connection requests from clients running on
-#      the host where the out-of-the-box JMX management agent is running.
-#      In order to ensure backwards compatibility this property could be
-#      set to false. However, deploying the local management agent in this
-#      way is discouraged because the local JMX RMI connector server will
-#      accept connection requests from any client either local or remote.
-#      For remote management the remote JMX RMI connector server should
-#      be used instead with authentication and SSL/TLS encryption enabled.
-#
-
-# For allowing the local management agent accept local
-# and remote connection requests use the following line
-# com.sun.management.jmxremote.local.only=false
-
-#
-# ###################### RMI SSL #############################
-#
-# com.sun.management.jmxremote.ssl=true|false
-#      Default for this property is true. (Case for true/false ignored)
-#      If this property is specified as false then SSL is not used.
-#
-
-# For RMI monitoring without SSL use the following line
-# com.sun.management.jmxremote.ssl=false
-
-# com.sun.management.jmxremote.ssl.config.file=filepath
-#      Specifies the location of the SSL configuration file. A properties
-#      file can be used to supply the keystore and truststore location and
-#      password settings thus avoiding to pass them as cleartext in the
-#      command-line.
-#
-#      The current implementation of the out-of-the-box management agent will
-#      look up and use the properties specified below to configure the SSL
-#      keystore and truststore, if present:
-#          javax.net.ssl.keyStore=<keystore-location>
-#          javax.net.ssl.keyStorePassword=<keystore-password>
-#          javax.net.ssl.trustStore=<truststore-location>
-#          javax.net.ssl.trustStorePassword=<truststore-password>
-#      Any other properties in the file will be ignored. This will allow us
-#      to extend the property set in the future if required by the default
-#      SSL implementation.
-#
-#      If the property "com.sun.management.jmxremote.ssl" is set to false,
-#      then this property is ignored.
-#
-
-# For supplying the keystore settings in a file use the following line
-# com.sun.management.jmxremote.ssl.config.file=filepath
-
-# com.sun.management.jmxremote.ssl.enabled.cipher.suites=<cipher-suites>
-#      The value of this property is a string that is a comma-separated list
-#      of SSL/TLS cipher suites to enable. This property can be specified in
-#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
-#      in order to control which particular SSL/TLS cipher suites are enabled
-#      for use by accepted connections. If this property is not specified then
-#      the SSL/TLS RMI Server Socket Factory uses the SSL/TLS cipher suites that
-#      are enabled by default.
-#
-
-# com.sun.management.jmxremote.ssl.enabled.protocols=<protocol-versions>
-#      The value of this property is a string that is a comma-separated list
-#      of SSL/TLS protocol versions to enable. This property can be specified in
-#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
-#      in order to control which particular SSL/TLS protocol versions are
-#      enabled for use by accepted connections. If this property is not
-#      specified then the SSL/TLS RMI Server Socket Factory uses the SSL/TLS
-#      protocol versions that are enabled by default.
-#
-
-# com.sun.management.jmxremote.ssl.need.client.auth=true|false
-#      Default for this property is false. (Case for true/false ignored)
-#      If this property is specified as true in conjunction with the previous
-#      property "com.sun.management.jmxremote.ssl" then the SSL/TLS RMI Server
-#      Socket Factory will require client authentication.
-#
-
-# For RMI monitoring with SSL client authentication use the following line
-# com.sun.management.jmxremote.ssl.need.client.auth=true
-
-# com.sun.management.jmxremote.registry.ssl=true|false
-#      Default for this property is false. (Case for true/false ignored)
-#      If this property is specified as true then the RMI registry used
-#      to bind the RMIServer remote object is protected with SSL/TLS
-#      RMI Socket Factories that can be configured with the properties:
-#          com.sun.management.jmxremote.ssl.config.file
-#          com.sun.management.jmxremote.ssl.enabled.cipher.suites
-#          com.sun.management.jmxremote.ssl.enabled.protocols
-#          com.sun.management.jmxremote.ssl.need.client.auth
-#      If the two properties below are true at the same time, i.e.
-#          com.sun.management.jmxremote.ssl=true
-#          com.sun.management.jmxremote.registry.ssl=true
-#      then the RMIServer remote object and the RMI registry are
-#      both exported with the same SSL/TLS RMI Socket Factories.
-#
-
-# For using an SSL/TLS protected RMI registry use the following line
-# com.sun.management.jmxremote.registry.ssl=true
-
-#
-# ################ RMI User authentication ################
-#
-# com.sun.management.jmxremote.authenticate=true|false
-#      Default for this property is true. (Case for true/false ignored)
-#      If this property is specified as false then no authentication is
-#      performed and all users are allowed all access.
-#
-
-# For RMI monitoring without any checking use the following line
-# com.sun.management.jmxremote.authenticate=false
-
-#
-# ################ RMI Login configuration ###################
-#
-# com.sun.management.jmxremote.login.config=<config-name>
-#      Specifies the name of a JAAS login configuration entry to use when
-#      authenticating users of RMI monitoring.
-#
-#      Setting this property is optional - the default login configuration
-#      specifies a file-based authentication that uses the password file.
-#
-#      When using this property to override the default login configuration
-#      then the named configuration entry must be in a file that gets loaded
-#      by JAAS. In addition, the login module(s) specified in the configuration
-#      should use the name and/or password callbacks to acquire the user's
-#      credentials. See the NameCallback and PasswordCallback classes in the
-#      javax.security.auth.callback package for more details.
-#
-#      If the property "com.sun.management.jmxremote.authenticate" is set to
-#      false, then this property and the password & access files are ignored.
-#
-
-# For a non-default login configuration use the following line
-# com.sun.management.jmxremote.login.config=<config-name>
-
-#
-# ################ RMI Password file location ##################
-#
-# com.sun.management.jmxremote.password.file=filepath
-#      Specifies location for password file
-#      This is optional - default location is
-#      $JRE/conf/management/jmxremote.password
-#
-#      If the property "com.sun.management.jmxremote.authenticate" is set to
-#      false, then this property and the password & access files are ignored.
-#      Otherwise the password file must exist and be in the valid format.
-#      If the password file is empty or non-existent then no access is allowed.
-#
-
-# For a non-default password file location use the following line
-# com.sun.management.jmxremote.password.file=filepath
-
-#
-# ################# Hash passwords in password file ##############
-# com.sun.management.jmxremote.password.toHashes = true|false
-#      Default for this property is true.
-#      Specifies if passwords in the password file should be hashed or not.
-#      If this property is true, and if the password file is writable, and if the
-#      system security policy allows writing into the password file,
-#      all the clear passwords in the password file will be replaced by
-#      their SHA3-512 hash when the file is read by the server
-#
-
-#
-# ################ RMI Access file location #####################
-#
-# com.sun.management.jmxremote.access.file=filepath
-#      Specifies location for access  file
-#      This is optional - default location is
-#      $JRE/conf/management/jmxremote.access
-#
-#      If the property "com.sun.management.jmxremote.authenticate" is set to
-#      false, then this property and the password & access files are ignored.
-#      Otherwise, the access file must exist and be in the valid format.
-#      If the access file is empty or non-existent then no access is allowed.
-#
-
-# For a non-default password file location use the following line
-# com.sun.management.jmxremote.access.file=filepath
-#
-
-# ################ Management agent listen interface #########################
-#
-# com.sun.management.jmxremote.host=<host-or-interface-name>
-#      Specifies the local interface on which the JMX RMI agent will bind.
-#      This is useful when running on machines which have several
-#      interfaces defined. It makes it possible to listen to a specific
-#      subnet accessible through that interface.
-#
-#      The format of the value for that property is any string accepted
-#      by java.net.InetAddress.getByName(String).
-#
-
-# ################ Filter for ObjectInputStream #############################
-# com.sun.management.jmxremote.serial.filter.pattern=<filter-string>
-#   A filter, if configured, is used by java.io.ObjectInputStream during
-#   deserialization of parameters sent to the JMX default agent to validate the
-#   contents of the stream.
-#   A filter is configured as a sequence of patterns, each pattern is either
-#   matched against the name of a class in the stream or defines a limit.
-#   Patterns are separated by ";" (semicolon).
-#   Whitespace is significant and is considered part of the pattern.
-#
-#   If a pattern includes a "=", it sets a limit.
-#   If a limit appears more than once the last value is used.
-#   Limits are checked before classes regardless of the order in the sequence of patterns.
-#   If any of the limits are exceeded, the filter status is REJECTED.
-#
-#       maxdepth=value - the maximum depth of a graph
-#       maxrefs=value  - the maximum number of internal references
-#       maxbytes=value - the maximum number of bytes in the input stream
-#       maxarray=value - the maximum array length allowed
-#
-#   Other patterns, from left to right, match the class or package name as
-#   returned from Class.getName.
-#   If the class is an array type, the class or package to be matched is the element type.
-#   Arrays of any number of dimensions are treated the same as the element type.
-#   For example, a pattern of "!example.Foo", rejects creation of any instance or
-#   array of example.Foo.
-#
-#   If the pattern starts with "!", the status is REJECTED if the remaining pattern
-#       is matched; otherwise the status is ALLOWED if the pattern matches.
-#   If the pattern contains "/", the non-empty prefix up to the "/" is the module name;
-#       if the module name matches the module name of the class then
-#       the remaining pattern is matched with the class name.
-#   If there is no "/", the module name is not compared.
-#   If the pattern ends with ".**" it matches any class in the package and all subpackages.
-#   If the pattern ends with ".*" it matches any class in the package.
-#   If the pattern ends with "*", it matches any class with the pattern as a prefix.
-#   If the pattern is equal to the class name, it matches.
-#   Otherwise, the status is UNDECIDED.
-#
-#   Ending with !* ensures we reject classes which are otherwise unmatched.
-com.sun.management.jmxremote.serial.filter.pattern=\
-java.lang.*;\
-java.lang.reflect.Proxy;\
-java.math.BigInteger;\
-java.math.BigDecimal;\
-java.util.*;\
-javax.management.*;\
-javax.management.modelmbean.*;\
-javax.management.monitor.*;\
-javax.management.openmbean.*;\
-javax.management.relation.*;\
-javax.management.remote.*;\
-javax.management.remote.rmi.*;\
-javax.management.timer.*;\
-javax.rmi.ssl.*;\
-java.rmi.MarshalledObject;\
-java.rmi.dgc.*;\
-java.rmi.server.*;\
-javax.security.auth.Subject;\
-!*
-

quarchpy/connection_specific/jdk-j21-jres/win-amd64-jdk-21-jre/conf/net.properties

@@ -1,151 +0,0 @@
-############################################################
-#       Default Networking Configuration File
-#
-# This file may contain default values for the networking system properties.
-# These values are only used when the system properties are not specified
-# on the command line or set programmatically.
-# For now, only the various proxy settings can be configured here.
-############################################################
-
-# Whether or not the DefaultProxySelector will default to System Proxy
-# settings when they do exist.
-# Set it to 'true' to enable this feature and check for platform
-# specific proxy settings
-# Note that the system properties that do explicitly set proxies
-# (like http.proxyHost) do take precedence over the system settings
-# even if java.net.useSystemProxies is set to true.
-
-java.net.useSystemProxies=false
-
-#------------------------------------------------------------------------
-# Proxy configuration for the various protocol handlers.
-# DO NOT uncomment these lines if you have set java.net.useSystemProxies
-# to true as the protocol specific properties will take precedence over
-# system settings.
-#------------------------------------------------------------------------
-
-# HTTP Proxy settings. proxyHost is the name of the proxy server
-# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
-# value is 80) and nonProxyHosts is a '|' separated list of hostnames which
-# should be accessed directly, ignoring the proxy server (default value is
-# localhost & 127.0.0.1).
-#
-# http.proxyHost=
-# http.proxyPort=80
-http.nonProxyHosts=localhost|127.*|[::1]
-#
-# HTTPS Proxy Settings. proxyHost is the name of the proxy server
-# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
-# value is 443). The HTTPS protocol handlers uses the http nonProxyHosts list.
-#
-# https.proxyHost=
-# https.proxyPort=443
-#
-# FTP Proxy settings. proxyHost is the name of the proxy server
-# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
-# value is 80) and nonProxyHosts is a '|' separated list of hostnames which
-# should be accessed directly, ignoring the proxy server (default value is
-# localhost & 127.0.0.1).
-#
-# ftp.proxyHost=
-# ftp.proxyPort=80
-ftp.nonProxyHosts=localhost|127.*|[::1]
-#
-# Socks proxy settings. socksProxyHost is the name of the proxy server
-# (e.g. socks.domain.com), socksProxyPort is the port number to use
-# (default value is 1080)
-#
-# socksProxyHost=
-# socksProxyPort=1080
-#
-# HTTP Keep Alive settings. remainingData is the maximum amount of data
-# in kilobytes that will be cleaned off the underlying socket so that it
-# can be reused (default value is 512K), queuedConnections is the maximum
-# number of Keep Alive connections to be on the queue for clean up (default
-# value is 10).
-# http.KeepAlive.remainingData=512
-# http.KeepAlive.queuedConnections=10
-
-# Authentication Scheme restrictions for HTTP and HTTPS.
-#
-# In some environments certain authentication schemes may be undesirable
-# when proxying HTTP or HTTPS.  For example, "Basic" results in effectively the
-# cleartext transmission of the user's password over the physical network.
-# This section describes the mechanism for disabling authentication schemes
-# based on the scheme name. Disabled schemes will be treated as if they are not
-# supported by the implementation.
-#
-# The 'jdk.http.auth.tunneling.disabledSchemes' property lists the authentication
-# schemes that will be disabled when tunneling HTTPS over a proxy, HTTP CONNECT.
-# The 'jdk.http.auth.proxying.disabledSchemes' property lists the authentication
-# schemes that will be disabled when proxying HTTP.
-#
-# In both cases the property is a comma-separated list of, case-insensitive,
-# authentication scheme names, as defined by their relevant RFCs. An
-# implementation may, but is not required to, support common schemes whose names
-# include: 'Basic', 'Digest', 'NTLM', 'Kerberos', 'Negotiate'.  A scheme that
-# is not known, or not supported, by the implementation is ignored.
-#
-# Note: This property is currently used by the JDK Reference implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-#jdk.http.auth.proxying.disabledSchemes=
-jdk.http.auth.tunneling.disabledSchemes=Basic
-
-#
-# Allow restricted HTTP request headers
-#
-# By default, the following request headers are not allowed to be set by user code
-# in HttpRequests: "connection", "content-length", "expect", "host" and "upgrade".
-# The 'jdk.httpclient.allowRestrictedHeaders' property allows one or more of these
-# headers to be specified as a comma separated list to override the default restriction.
-# The names are case-insensitive and white-space is ignored (removed before processing
-# the list). Note, this capability is mostly intended for testing and isn't expected
-# to be used in real deployments. Protocol errors or other undefined behavior is likely
-# to occur when using them. The property is not set by default.
-# Note also, that there may be other headers that are restricted from being set
-# depending on the context. This includes the "Authorization" header when the
-# relevant HttpClient has an authenticator set. These restrictions cannot be
-# overridden by this property.
-#
-# jdk.httpclient.allowRestrictedHeaders=host
-#
-#
-# Transparent NTLM HTTP authentication mode on Windows. Transparent authentication
-# can be used for the NTLM scheme, where the security credentials based on the
-# currently logged in user's name and password can be obtained directly from the
-# operating system, without prompting the user. This property has three possible
-# values which regulate the behavior as shown below. Other unrecognized values
-# are handled the same as 'disabled'. Note, that NTLM is not considered to be a
-# strongly secure authentication scheme and care should be taken before enabling
-# this mechanism.
-#
-# Transparent authentication never used.
-#jdk.http.ntlm.transparentAuth=disabled
-#
-# Enabled for all hosts.
-#jdk.http.ntlm.transparentAuth=allHosts
-#
-# Enabled for hosts that are trusted in Windows Internet settings
-#jdk.http.ntlm.transparentAuth=trustedHosts
-#
-jdk.http.ntlm.transparentAuth=disabled
-#
-# Default directory where automatically bound Unix domain server
-# sockets are stored. Sockets are automatically bound when bound
-# with a null address.
-#
-# The search order for the directory on Windows is:
-#
-# 1. System property "jdk.net.unixdomain.tmpdir"
-#
-# 2. Networking property "jdk.net.unixdomain.tmpdir" specified
-#    in this file (not set by default)
-#
-# 3. The TEMP environment variable (the effective default)
-#
-# 4. The java.io.tmpdir system property
-#
-#jdk.net.unixdomain.tmpdir=
-#
-

quarchpy/connection_specific/jdk-j21-jres/win-amd64-jdk-21-jre/conf/security/java.policy

@@ -1,46 +0,0 @@
-//
-// This system policy file grants a set of default permissions to all domains
-// and can be configured to grant additional permissions to modules and other
-// code sources. The code source URL scheme for modules linked into a
-// run-time image is "jrt".
-//
-// For example, to grant permission to read the "foo" property to the module
-// "com.greetings", the grant entry is:
-//
-// grant codeBase "jrt:/com.greetings" {
-//     permission java.util.PropertyPermission "foo", "read";
-// };
-//
-
-// default permissions granted to all domains
-grant {
-    // allows anyone to listen on dynamic ports
-    permission java.net.SocketPermission "localhost:0", "listen";
-
-    // "standard" properties that can be read by anyone
-    permission java.util.PropertyPermission "java.version", "read";
-    permission java.util.PropertyPermission "java.vendor", "read";
-    permission java.util.PropertyPermission "java.vendor.url", "read";
-    permission java.util.PropertyPermission "java.class.version", "read";
-    permission java.util.PropertyPermission "os.name", "read";
-    permission java.util.PropertyPermission "os.version", "read";
-    permission java.util.PropertyPermission "os.arch", "read";
-    permission java.util.PropertyPermission "file.separator", "read";
-    permission java.util.PropertyPermission "path.separator", "read";
-    permission java.util.PropertyPermission "line.separator", "read";
-    permission java.util.PropertyPermission
-                   "java.specification.version", "read";
-    permission java.util.PropertyPermission
-                   "java.specification.maintenance.version", "read";
-    permission java.util.PropertyPermission "java.specification.vendor", "read";
-    permission java.util.PropertyPermission "java.specification.name", "read";
-    permission java.util.PropertyPermission
-                   "java.vm.specification.version", "read";
-    permission java.util.PropertyPermission
-                   "java.vm.specification.vendor", "read";
-    permission java.util.PropertyPermission
-                   "java.vm.specification.name", "read";
-    permission java.util.PropertyPermission "java.vm.version", "read";
-    permission java.util.PropertyPermission "java.vm.vendor", "read";
-    permission java.util.PropertyPermission "java.vm.name", "read";
-};