quarchpy 2.1.11.dev8__py3-none-any.whl → 2.2.17.dev1__py3-none-any.whl

quarchpy/config_files/Switch_Modules/QTL1564-xx - 12 Port Mini SAS HD MUX Module Config v4.000.qfg

@@ -1,185 +1,185 @@
-@CONFIG Version=2
-
-# Torridon HS mini SAS MUX module
-@HEADER
-DeviceClass=TorridonMuxModule
-DeviceNumbers=QTL1564-xx
-DeviceNumbersExclude=
-MinFirmwareRequired=4.000
-MinFpgaRequired=1.1
-DeviceDescription=Mini SAS HD MUX Module
-
-#Describes general module abilities
-@GENERAL
-ConnectDelay_Present = true
-ConnectDelay_Limits = int,0,10,1
-OffPortName = 0
-PortNameDisplayWidth = 80
-PortNameDisplayHeight = 15
-
-@PORT_GROUPS
-Name=ALL,Ports="1,2,3,4,5,6,7,8,9,10,11,12"
-
-#Describes ports
-@PORTS
-
-
-@PORT_START
-PortName=1
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=10,55
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=2
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=30,40
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=3
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=85,15
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=4
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=115,15
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=5
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=160,40
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=6
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=180,55
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=7
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=10,95
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=8
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=30,110
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=9
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=85,135
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=10
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=115,135
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=11
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=160,110
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=12
-Type=DEVICE
-PreEmphasis_Present = true
-PreEmphasis_Limits=int,0,7,1
-Equalisation_Present = true
-Equalisation_Limits=int,0,31,1
-Amplitude_Limits=int,0,2,1
-Amplitude_Present = true
-GuiDisplayPoint=180,95
-PortColor=Black
-@PORT_END
-
-@MEASURE
-Name=12v,Type=SelfVoltage
+@CONFIG Version=2
+
+# Torridon HS mini SAS MUX module
+@HEADER
+DeviceClass=TorridonMuxModule
+DeviceNumbers=QTL1564-xx
+DeviceNumbersExclude=
+MinFirmwareRequired=4.000
+MinFpgaRequired=1.1
+DeviceDescription=Mini SAS HD MUX Module
+
+#Describes general module abilities
+@GENERAL
+ConnectDelay_Present = true
+ConnectDelay_Limits = int,0,10,1
+OffPortName = 0
+PortNameDisplayWidth = 80
+PortNameDisplayHeight = 15
+
+@PORT_GROUPS
+Name=ALL,Ports="1,2,3,4,5,6,7,8,9,10,11,12"
+
+#Describes ports
+@PORTS
+
+
+@PORT_START
+PortName=1
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=10,55
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=2
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=30,40
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=3
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=85,15
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=4
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=115,15
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=5
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=160,40
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=6
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=180,55
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=7
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=10,95
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=8
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=30,110
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=9
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=85,135
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=10
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=115,135
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=11
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=160,110
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=12
+Type=DEVICE
+PreEmphasis_Present = true
+PreEmphasis_Limits=int,0,7,1
+Equalisation_Present = true
+Equalisation_Limits=int,0,31,1
+Amplitude_Limits=int,0,2,1
+Amplitude_Present = true
+GuiDisplayPoint=180,95
+PortColor=Black
+@PORT_END
+
+@MEASURE
+Name=12v,Type=SelfVoltage
 Name=5v,Type=SelfVoltage

quarchpy/config_files/Switch_Modules/QTL1584-xx - 1-4 ExpressCard MUX Module Config v4.000.qfg

@@ -1,82 +1,82 @@
-@CONFIG Version=2
-
-# Torridon ExpressCard MUX module
-@HEADER
-DeviceClass=TorridonMuxModule
-DeviceNumbers=QTL1584-xx
-DeviceNumbersExclude=
-MinFirmwareRequired=4.000
-MinFpgaRequired=1.1
-DeviceDescription=ExpressCard MUX
-
-#Describes general module abilities
-@GENERAL
-ConnectDelay_Present = true
-ConnectDelay_Limits = int,0,10,1
-OffPortName = 0
-PortNameDisplayWidth = 80
-PortNameDisplayHeight = 15
-ForwardCommand_Present = false
-
-@PORT_GROUPS
-Name=ALL,Ports="A,1,2,3,4"
-
-#Describes ports
-@PORTS
-
-@PORT_START
-PortName=A
-Type=HOST
-PreEmphasis_Present = false
-Equalisation_Present = false
-Amplitude_Present = false
-GuiDisplayPoint=100,75
-PortColor=Green
-@PORT_END
-
-
-@PORT_START
-PortName=1
-Type=DEVICE
-PreEmphasis_Present = false
-Equalisation_Present = false
-Amplitude_Present = false
-GuiDisplayPoint=20,20
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=2
-Type=DEVICE
-PreEmphasis_Present = false
-Equalisation_Present = false
-Amplitude_Present = false
-GuiDisplayPoint=20,50
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=3
-Type=DEVICE
-PreEmphasis_Present = false
-Equalisation_Present = false
-Amplitude_Present = false
-GuiDisplayPoint=20,80
-PortColor=Black
-@PORT_END
-
-@PORT_START
-PortName=4
-Type=DEVICE
-PreEmphasis_Present = false
-Equalisation_Present = false
-Amplitude_Present = false
-GuiDisplayPoint=20,110
-PortColor=Black
-@PORT_END
-
-@MEASURE
-Name=12v,Type=SelfVoltage
-Name=5v,Type=SelfVoltage
-Name=3v3,Type=SelfVoltage
+@CONFIG Version=2
+
+# Torridon ExpressCard MUX module
+@HEADER
+DeviceClass=TorridonMuxModule
+DeviceNumbers=QTL1584-xx
+DeviceNumbersExclude=
+MinFirmwareRequired=4.000
+MinFpgaRequired=1.1
+DeviceDescription=ExpressCard MUX
+
+#Describes general module abilities
+@GENERAL
+ConnectDelay_Present = true
+ConnectDelay_Limits = int,0,10,1
+OffPortName = 0
+PortNameDisplayWidth = 80
+PortNameDisplayHeight = 15
+ForwardCommand_Present = false
+
+@PORT_GROUPS
+Name=ALL,Ports="A,1,2,3,4"
+
+#Describes ports
+@PORTS
+
+@PORT_START
+PortName=A
+Type=HOST
+PreEmphasis_Present = false
+Equalisation_Present = false
+Amplitude_Present = false
+GuiDisplayPoint=100,75
+PortColor=Green
+@PORT_END
+
+
+@PORT_START
+PortName=1
+Type=DEVICE
+PreEmphasis_Present = false
+Equalisation_Present = false
+Amplitude_Present = false
+GuiDisplayPoint=20,20
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=2
+Type=DEVICE
+PreEmphasis_Present = false
+Equalisation_Present = false
+Amplitude_Present = false
+GuiDisplayPoint=20,50
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=3
+Type=DEVICE
+PreEmphasis_Present = false
+Equalisation_Present = false
+Amplitude_Present = false
+GuiDisplayPoint=20,80
+PortColor=Black
+@PORT_END
+
+@PORT_START
+PortName=4
+Type=DEVICE
+PreEmphasis_Present = false
+Equalisation_Present = false
+Amplitude_Present = false
+GuiDisplayPoint=20,110
+PortColor=Black
+@PORT_END
+
+@MEASURE
+Name=12v,Type=SelfVoltage
+Name=5v,Type=SelfVoltage
+Name=3v3,Type=SelfVoltage
 Name=1v8,Type=SelfVoltage

quarchpy/config_files/quarch_config_parser.py

@@ -1,4 +1,5 @@
 import logging
+logger = logging.getLogger(__name__)
 import os, os.path, sys
 import inspect
 import quarchpy.config_files
@@ -245,7 +246,7 @@ def get_config_path_for_module (idn_string = None, module_connection = None):
 
     # Check for invalid parameters
     if (idn_string is None and module_connection is None):
-        logging.error("Invalid parameters, no module information given")
+        logger.error("Invalid parameters, no module information given")
         result = False
     else:
         # Prefer IDN string, otherwise use the module connection to get it now
@@ -280,12 +281,12 @@ def get_config_path_for_module (idn_string = None, module_connection = None):
         # Log the failure if we did not get all the info needed
         if (device_number is None):
             result = False
-            logging.error("Unable to identify module - no module number")
+            logger.error("Unable to identify module - no module number")
         if (device_fw is None):
-            logging.error("Unable to identify module - no firmware version")
+            logger.error("Unable to identify module - no firmware version")
             result = False
         if (device_fpga is None):
-            logging.error("Unable to identify module - no FPGA version")
+            logger.error("Unable to identify module - no FPGA version")
             result = False
 
         # If we got all the data, use it to find the config file
@@ -307,7 +308,7 @@ def get_config_path_for_module (idn_string = None, module_connection = None):
                             # Check if FPGA version matches
                             if (check_fpga_version_matches(i, device_fpga)):
                                 # Store this as a matching config file for the device
-                                logging.debug("Located matching config file: " + i["Config_Path"])
+                                logger.debug("Located matching config file: " + i["Config_Path"])
                                 config_matches.append (i)
 
             # Sort the config files into preferred order
@@ -315,7 +316,7 @@ def get_config_path_for_module (idn_string = None, module_connection = None):
                 config_matches = sort_config_headers (config_matches)
                 return config_matches[0]["Config_Path"]
             else:
-                logging.error("No matching config files were found for this module")
+                logger.error("No matching config files were found for this module")
                 return None
 
 # Attempts to parse every file on the system to check for errors in the config files or the parser
@@ -363,7 +364,7 @@ def get_config_file_headers ():
             new_config["Config_Path"] = i
             config_headers.append (new_config)
         else:
-            logging.error("Config file parse failed, @CONFIG section not found")
+            logger.error("Config file parse failed, @CONFIG section not found")
 
     return config_headers
 
@@ -401,7 +402,7 @@ def parse_section_to_dictionary (read_file):
         else:
             pos = line.find ('=')
             if (pos == -1):
-                logging.error("Config line does not meet required format of x=y: " + line)
+                logger.error("Config line does not meet required format of x=y: " + line)
                 return None
             else:
                 elements[line[:pos]] = line[pos+1:]
@@ -421,7 +422,7 @@ def check_part_number_matches(config_header, device_number):
         short_device_number = device_number[:-pos]
     # Fail on part number not including the version section
     else:
-        logging.debug("Part number did not contain the version :" + device_number)
+        logger.debug("Part number did not contain the version :" + device_number)
         return False
 
     # Loop through the allowed part numbers
@@ -437,7 +438,7 @@ def check_part_number_matches(config_header, device_number):
                 any_version = False;               
         # Fail if config number is invalid
         else:
-            logging.debug("Part number in config file is not in the right format: " + dev)
+            logger.debug("Part number in config file is not in the right format: " + dev)
             return False;
 
         # Return true if we find a number that matches in full, or one which matches in part and the any_version flag was present in the config file
@@ -459,12 +460,12 @@ def check_part_exclude_matches(config_header, device_number):
         short_device_number = device_number[:-pos]
     # Fail on part number not including the version section
     else:
-        logging.debug("Part number did not contain the version :" + device_number)
+        logger.debug("Part number did not contain the version :" + device_number)
         return False
 
     # Check that the part number is fully qualified (will not be the case if the serial number is not set)
     if ("?" in device_number):
-        logging.debug("Part number is not fully qualified :" + device_number)
+        logger.debug("Part number is not fully qualified :" + device_number)
         return False
 
     # Loop through the excluded part numbers
@@ -484,7 +485,7 @@ def check_part_exclude_matches(config_header, device_number):
                 any_version = False;               
         # Fail if config number is invalid
         else:
-            logging.debug("Exclude part number in config file is not in the right format: " + dev)
+            logger.debug("Exclude part number in config file is not in the right format: " + dev)
             return False;
 
         # Return true if we find a number that matches in full, or one which matches in part and the any_version flag was present in the config file
@@ -617,13 +618,13 @@ def parse_config_file (file):
                 section_dict[line_name] = line_value
     
     # Now build the appropriate module class
-    # TODO: Assuming breaker for testing
+    # Assuming breaker for testing
     if (config_dict["HEADER"]["DeviceClass"] == "TorridonModule"):
         dev_caps = TorridonBreakerModule ()
         dev_caps.config_data = config_dict
         return dev_caps
     else:
-        logging.error("Only 'TorridonModule' class devices are currently supported")
+        logger.error("Only 'TorridonModule' class devices are currently supported")
         return None
 
 # Parses the sources section of a Torridon breaker module, returning a list of sources