quarchpy 2.1.11.dev4__py3-none-any.whl → 2.2.17.dev1__py3-none-any.whl

quarchpy/connection_specific/QPS/qis/help.txt

@@ -1,4 +1,7 @@
-(C)Quarch Technology Ltd 2023, QIS v1.36
+Quarch Instrument Server (QIS) Help
+Quarch Technology Ltd
+Copyright (C) 2025
+QIS v1.51
 
 qis:
 
@@ -17,7 +20,6 @@ qis:
 		A terminal window is already open
 		The inbuilt terminal interface is disabled, see "The inbuilt terminal window".
 
-
 	
 Command line parameters:
 
@@ -29,11 +31,11 @@ Command line parameters:
 		option is unlocked where locked is defined as when the file disableterminal.txt exists
 		and is set to read only.
 
-	-logging
-		Enables application logging to file
-		
-	-logtarget=file
-		Logs to the specified file
+	-loglevel=OFF,FATAL,ERROR,WARN,INFO,DEBUG,TRACE,ALL
+	    Sets the logging level, which by default is set to INFO
+
+	-logconsole
+	    Log to the console as well as to file
 		
 	-devdebug
 		Enables development debug output to the console
@@ -46,7 +48,12 @@ Command line parameters:
 		and qis will run in headless mode, no system tray icon or terminal window so interaction
 		is only possible via a separate REST or TCP application.
 
-	
+	-port
+	    Allows user to specify the telnet port to use
+
+	-restport
+	    Allows user to specify the rest port to use
+
 
 Client side connections:
 
@@ -56,7 +63,6 @@ Client side connections:
 	
 	These port settings can be found and changed in the qis local directory file qis.properties.
 
-
 	
 The inbuilt terminal window:
 
@@ -64,14 +70,11 @@ The inbuilt terminal window:
 	need to script a connection or track down a copy of Putty. The opening of terminal window may be
 	prevented by setting the qis local directory file disableterminal.txt to read only.
 	
-	     
 
 $ Commands internal to qis:
 
 	$help
 		Displays copyright, license and help information.
-		
-		
 		 
 	$list 			
 		List attached devices, eg
@@ -79,25 +82,21 @@ $ Commands internal to qis:
 		1) usb::qtl1847-01-016
 		2) rest::qtl1944-01-020
 		3) tcp::qtl1944-01-020
-	
-	
+
 	$list details
 		List attached devices with additional information, eg
 		
 		1) usb::QTL1847-01-016 Port:9 Stream:Yes Name:XLC Programmable Power Module
 		2) rest::QTL1999-02-020 IP:192.168.1.90 Port:80 NBName:1999-02-020 Stream:Yes Name:HD Programmable Power Module +Triggering
 		3) tcp::QTL1999-02-020 IP:192.168.1.90 Port:9760 NBName:1999-02-020 Stream:Yes Name:HD Programmable Power Module +Triggering
-	
-	
-	
+
 	$scan
 		Perform a scan for connected network attached devices via UPD port 30303. This command returns immediately 
 		but the actual scan takes about 3 seconds to complete. It is recommended to wait 3 seconds before executing
 		any other command. 
 		
 		N.B. USB devices are scanned automatically.
-		
-	
+
 	$scan TCPIPdevicespecifier 
 		Scan for a device at a specific tcp/ip address, eg
 	
@@ -115,7 +114,7 @@ $ Commands internal to qis:
 	$scan?
 		Returns state of USB and Ethernet scanners. Ethernet information includes scan time in mS
 		
-	$scan integer
+	$scan -tinteger
 		Integer value is in milliseconds (1000 = 1 second). Sets the Ethernet scan timer to the specified value, if the value is 0 the
 		automatic scan is stopped. The minimum realistic scan time is 10mS, the default is 20000mS (20 seconds)
 	
@@ -128,7 +127,6 @@ $ Commands internal to qis:
 	$debug history
 		Returns the most recent debug messages.
 
-	
 	$default device
 	$def device
 		set device as the default target for all device commands, eg
@@ -138,8 +136,7 @@ $ Commands internal to qis:
 		HD Programmable Power Module +Triggering
 	
 		The default device is unique to each client side connection, though due to the nature of
-		http it may be unwise to rely on the connection been maintained during a REST session.  
-		
+		http it may be unwise to rely on the connection been maintained during a REST session.
 		
 	$default deviceListEntryNumber
 	$def deviceListEntryNumber
@@ -151,8 +148,7 @@ $ Commands internal to qis:
 		3) tcp::qtl1944-01-020
 		
 		$default 3
-		Will set list entry 3) tcp::qtl1944-01-020 as the default device 
-	
+		Will set list entry 3) tcp::qtl1944-01-020 as the default device
 	
 	$default?
 	$def?
@@ -160,22 +156,23 @@ $ Commands internal to qis:
 		
 		$default?
 		Default Device tcp::qtl1944-01-020
-	
-		
-	
+
+	$loglevel [level]
+	    Sets the log-level
+	    Of the form: $loglevel DEBUG, with valid options: [OFF, FATAL, ERROR, WARN, INFO, DEBUG, TRACE, ALL]
+	$loglevel?
+	    Returns the current log-level
+
 	$sysinfo
 		Displays memory usage and stream task information, eg
 			Used Memory: 36.591705 MB
 			Free Memory: 34.908295 MB
 			Total Memory: 71.500000 MB
 			Max Memory: 1808.000000 MB
-	
-	
-	
+
 	$shutdown
 		Close this application
-	
-	
+
 	$sleep [integer value]
 		the command will return after [integer value] milliseconds.
 	
@@ -190,6 +187,12 @@ $ Commands internal to qis:
 		
 	$version
 		Returns QIS version number
+	
+	$get filters
+		Returns name and sample rate of the loaded filter sets.
+	
+	$load filter [directory path]
+		Loads all filter XML files found in the provided directory path - XML files must follow the standard layout.
 
 Non $ Commands internal to qis:
 
@@ -203,8 +206,7 @@ Non $ Commands internal to qis:
 		usb::qtl1824-03-161 stream text header
 			Returns the stream header information form the most recent stream to be run on 
 			device usb::qtl1824-03-161
-		
-	
+
 	stream?
 		Returns running status and buffer information for the current stream operation, eg
 		
@@ -213,8 +215,7 @@ Non $ Commands internal to qis:
 		
 		Running
 		Stripes Buffered: 1167 of 8388608
-		
-	
+
 	stream text header
 		Returns header information for the current stream operation eg
 
@@ -250,13 +251,12 @@ Non $ Commands internal to qis:
 		To ease timing considerations, qis implements an internal buffer of approximately
 		8 million stripes.
 		Returns N stripes in binary format from the stream buffer.
-	
-	
+
 	stream mode power [enable|disable]
 		HD / XLC only. Enable/disable internal power calculation. Only valid when both voltage and current
 		values are available for a given channel. Default is disabled
 		
-	stream mode power total
+	stream mode power total [enable|disable]
 		HD / XLC only. Enable/disable internal power calculation and total power calculation. Only valid
 		when two or more power calculations are enabled. Default is disabled and once enabled a stream 
 		mode power [enable|disable] command will disable this option
@@ -268,9 +268,15 @@ Non $ Commands internal to qis:
 	stream mode resample off
 	stream mode resample 1..n[ms|us]
 	stream mode resample group g 1..n[ms|us]
+        In the case of a single-rate device "stream mode resample #" sets the re-sampling value to #. In the case of a
+        multi-rate device "stream mode resample #" sets all groups to #.
 		Force stream data to specified resample period. If device period > resample period, device period
 		will be used.
 		The absolute maximum resample time is 2,147,483,647us or about 2,147 seconds, this is untested!
+        For example:
+        stream mode resample 10mS           --> sets all groups to 10mS
+        stream mode resample group 0 100mS  --> sets group 0 to 100mS
+        stream mode resample group 1 200mS  --> sets group 1 to 200mS
 
 
 	Synthetic Channel Functions, see Appendix B
@@ -279,14 +285,19 @@ Non $ Commands internal to qis:
 		Creates a new channel.
 	stream created channel delete ...
 		Deletes a previously created channel.
+	stream create channel enable ...
+		Enables/Disables a previously created channel.
 	stream created channels clear
 		Deletes all previously created channels.
 	stream created channels?
 		Returns a list of all previously created channels.
+	stream created channels enabled?
+		Returns a list of previously created channels that are enabled.
+	stream created channels disabled?
+		Returns a list of previously created channels that are disabled.
 	stream created function definitions?
 		Returns an XML description of all supported functions.
 
-	
 	tcp::DeviceIdentifier forcereset
 	
 	tcp::DeviceIdentifier forceIPAddress aaa.bbb.ccc.ddd
@@ -299,8 +310,7 @@ Non $ Commands internal to qis:
 		
 			close
 			tcp::qtl1999-03-161 close
-		
-		
+
 TCPIPdevicespecifier
 	The TCP/IP device specifier has two general forms:
 		interface::DeviceIdentifier
@@ -316,8 +326,7 @@ TCPIPdevicespecifier
 		Forces the device connection to use port number 5432 with a message timeout of 3000ms. The initial
 		connection timeout for TCP is 10 times the message timeout. 
 	
-	
-	
+
 Any command not recognised by qis will be passed on to the current default device or to the device specified on the command line eg
 
 	hello? 
@@ -326,12 +335,11 @@ Any command not recognised by qis will be passed on to the current default devic
 	usb::qtl1824-03-161 hello?
 	XLC Programmable Power Module +Triggering
 	
-	
-	
+
 The $help screen:
 
     >$help
-    Quarch Instrument Server v1.35.01 (C)Quarch Technology Ltd 2023
+    Quarch Instrument Server v1.47 (C)Quarch Technology Ltd 2025
 
     This program uses:
     usb4java V1.3 distributed under LGPL v3.0
@@ -484,10 +492,16 @@ Appendix B: Synthetic Channel Functions
 		Creates a new channel.
 	stream created channel delete ...
 		Deletes a previously created channel.
+	stream create channel enable ...
+		Enables/Disables a previously created channel.
 	stream created channels clear
 		Deletes all previously created channels.
 	stream created channels?
 		Returns a list of all previously created channels.
+	stream created channels enabled?
+		Returns a list of previously created channels that are enabled.
+	stream created channels disabled?
+		Returns a list of previously created channels that are disabled.
 	stream created function definitions?
 		Returns an XML description of all supported functions.
 
@@ -513,6 +527,11 @@ A more detailed description, with examples, of each command follows:
 		A previously defined channel is deleted using the delete command by specifying both the channel name and group. For example:
 		
 		stream created channel delete chan(L1_RMS,V)
+	
+	stream created channel enable chan(chName, chGroup) [ON|OFF]
+		A previously defined channel is enabled or disabled using the enable command by specifying both the channel name and group. For example:
+		
+		stream created channel enable chan(L1_RMS,V) off
 		
 	stream created channels clear
 		Deletes all previously created channels, and serves as a convenience command to the above in which all channels are
@@ -528,7 +547,29 @@ A more detailed description, with examples, of each command follows:
 		chan(L1_RMS,V) rms(100mS, chan(L1,V))
 		chan(L1_RMS,A) rms(100mS, chan(L1,A))
 		...
+	
+	stream created channels enabled?
+		Returns a list of enabled previously created channels For example:
+		
+		stream created channels enabled?
+		
+		could return the following list:
 		
+		chan(L1_RMS,V) rms(100mS, chan(L1,V))
+		chan(L1_RMS,A) rms(100mS, chan(L1,A))
+		...
+	
+	stream created channels disabled?
+		Returns a list of disabled previously created channels For example:
+		
+		stream created channels disabled?
+		
+		could return the following list:
+		
+		chan(L1_RMS,V) rms(100mS, chan(L1,V))
+		chan(L1_RMS,A) rms(100mS, chan(L1,A))
+		...	
+	
 	stream created function definitions?
 		Returns the XML schema used to define the supported synthetic channel functions. For example:
 		
@@ -547,27 +588,37 @@ A more detailed description, with examples, of each command follows:
 		
 The currently supported synthetic channel functions are:
 
-	rms
-		The effective value of a sinusoidal waveform which gives the same heating effect as an equivalent DC supply.
-	sinewave
-		A test function generating a sine wave based on the supplied parameters.
+	average
+	    The average of a channel over the specified time window.
+	crestFactor
+		The ratio of peak value to RMS value over the specified time window.
+	expression
+	    Defines a channel via an expression.
 	frequency
 		The frequency of the signal specified by the source channel.
+	multiplier
+        The scalar multiple of a single source channel or the product of at least two source channels.
+	pActive
+		The actual power which is transferred to the load / dissipated in the circuit.
+	pApparent
+		The product of RMS voltage and RMS current.
 	phase
 		The difference in phase, expressed in degrees, between the two source channels.
 	pInstantaneous
 		The product of voltage and current.
-	pApparent
-		The product of RMS voltage and RMS current.
-	pActive
-		The actual power which is transferred to the load / dissipated in the circuit.
+	powerFactor
+		The ratio of the real power absorbed by the load to the apparent power flowing in the circuit.
 	pReactive
 		Power absorbed by and returned from the load due to its reactive properties.
-	PowerFactor
-		The ratio of the real power absorbed by the load to the apparent power flowing in the circuit.
-	Sum
+	rms
+		The effective value of a sinusoidal waveform which gives the same heating effect as an equivalent DC supply.
+	sineWave
+		A test function generating a sine wave based on the supplied parameters.
+	subtract
+		The difference of the specified channels.
+	sum
 		The sum of the specified channels.
-		
+
 Each of the above functions have differing arguments and return value and the best source of reference for each function's
 details is via the XML function definitions command described above.
 	
@@ -577,7 +628,7 @@ Appendix C: FAQ
 	port 80?
 	In their infinite wisdom the Windows 10 designers hijack port 80 for their own needs.  	
 	
-	When I try to launch qis I see a dialogue box/terminal window saying the application is 
+	When I try to launch qis I see a dialog box/terminal window saying the application is
 	"Shutting Down".
 	qis supports two client side interfaces, REST and TCP, if neither interface can be claimed
 	there is no means of communicating with client software so the application shuts down.   

quarchpy/connection_specific/QPS/qis/license.txt

@@ -0,0 +1 @@
+Please visit https://quarch.com/legal/ for details of the licensing of all Quarch software.

quarchpy/connection_specific/QPS/qis/qis-NoGUI.bat

@@ -1,3 +1,3 @@
 @echo off
-start /b java -Djava.awt.headless=true -jar qis.jar
+start /b java -Djava.net.preferIPv4Stack=true -Djava.net.preferIPv6Addresses=false --enable-native-access=ALL-UNNAMED -Djava.awt.headless=true -jar qis.jar
 

quarchpy/connection_specific/QPS/qis/qis-NoGUI.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-java -Djava.awt.headless=true -jar ./qis.jar
+java -Djava.net.preferIPv4Stack=true -Djava.net.preferIPv6Addresses=false --enable-native-access=ALL-UNNAMED -Djava.awt.headless=true -jar ./qis.jar
 # run in background after closing cmd window ?
 #nohup java -Djava.awt.headless=true -jar ./qis.jar &
 # run in background after closing cmd window logging output to file ?

quarchpy/connection_specific/QPS/qis/qis.bat

@@ -1,3 +1,3 @@
 @echo off
 rem start /b javaw -jar qis.jar -terminal
-start /b javaw -jar qis.jar
+start /b javaw -Djava.net.preferIPv4Stack=true -Djava.net.preferIPv6Addresses=false --enable-native-access=ALL-UNNAMED -jar qis.jar

quarchpy/connection_specific/QPS/qis/qis.sh

@@ -1,2 +1,2 @@
 #!/bin/bash
-nohup java -jar ./qis.jar &
+nohup java -Djava.net.preferIPv4Stack=true -Djava.net.preferIPv6Addresses=false --enable-native-access=ALL-UNNAMED -jar ./qis.jar &

quarchpy/connection_specific/QPS/qis/resources/filters/Example.txt

@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<filters>
+	<Header>
+		<!-- Version of the XML document -->
+		<Version>1.0</Version>
+
+		<!-- Name of the filter set -->
+		<Name>EXAMPLE_FILTERS</Name>
+
+		<!-- Description of the filter set -->
+		<Desc>This is an example of the XML layout for the filter XML files.</Desc>
+	</Header>
+    <!-- Example filter definition -->
+    <filter>
+        <!-- Provide a unique name for this filter with the format - FilterType_Frequency e.g. LowPass_100Hz -->
+        <name>FilterType_Frequency</name>
+
+        <!-- Description of the filter -->
+        <desc>This is a good description</desc>
+
+        <!-- Set the sample rate of the filter set -->
+        <sampleRate>125us</sampleRate>
+
+        <!-- Set the number of coefficient values here -->
+        <count>5</count>
+
+        <!-- Add up to 1000 comma-separated coefficient values -->
+        <values>
+            0.1,0.2,0.3,0.4,0.5
+        </values>
+    </filter>
+-->
+</filters>
+<!--
+    End of Example XML snippet
+-->

quarchpy/connection_specific/QPS/qis/resources/filters/iec_filters.xml

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Filters>
+    <Header>
+        <Version>1</Version>
+        <Name>LOWPASS_FILTERS_AC</Name>
+        <Desc>This filter set contains low-pass filters for AC devices e.g. IEC PAM</Desc>
+    </Header>
+    <filter>
+        <name>LOWPASS_100HZ_AC</name>
+        <desc>This is a low-pass filter with a cut-off of 100Hz specifically designed for AC devices.</desc>
+        <sampleRate>125us</sampleRate> 
+        <count>535</count>
+        <values>
+            -0.014142308,0.000212643,0.000215102,0.0002202,0.000227875,0.000238051,0.000250835,0.000265253,0.000282947,0.000302355,0.000323617,0.000346777,0.000371759,0.00039853,0.000426634,0.000456325,0.000487145,0.000518923,0.000551546,0.000584866,0.00061877,0.000652917,0.000687284,0.000721602,0.000755673,0.000789334,0.000822411,0.000854754,0.000886078,0.000916256,0.000945077,0.000972359,0.00099792,0.001021592,0.001043237,0.001062633,0.001079655,0.001094143,0.001105986,0.001115026,0.001121144,0.001124244,0.001124197,0.001120927,0.001114336,0.001104416,0.001091072,0.001074263,0.00105397,0.001030189,0.001002942,0.000972188,0.000938062,0.000900536,0.000859663,0.000815509,0.000768197,0.000717907,0.000664598,0.000608602,0.000549965,0.000488846,0.000425398,0.00035988,0.000292757,0.000223757,0.000153502,8.20E-05,9.52E-06,-6.39E-05,-0.000137972,-0.000210868,-0.00028482,-0.000357983,-0.000430491,-0.000502104,-0.000572903,-0.000659468,-0.000693286,-0.000763022,-0.000827979,-0.000889312,-0.000947123,-0.001001229,-0.001052027,-0.001098057,-0.001140481,-0.001178674,-0.001212289,-0.001241138,-0.001265021,-0.001284036,-0.001297681,-0.001306145,-0.001309251,-0.001306826,-0.001298771,-0.001284996,-0.0012656,-0.001240405,-0.001209512,-0.001172935,-0.001130696,-0.001082857,-0.001029495,-0.00097082,-0.000906897,-0.000837922,-0.000764071,-0.000685555,-0.000602595,-0.000515426,-0.000424375,-0.000329699,-0.000231721,-0.000130748,-2.72E-05,7.87E-05,0.000186386,0.000295562,0.000405804,0.000516675,0.000627801,0.000738677,0.000848864,0.000957916,0.00106538,0.001170808,0.001273675,0.001373628,0.001470101,0.00156265,0.001650836,0.001734267,0.001812564,0.001885135,0.001951805,0.002012024,0.002065432,0.002111675,0.002150514,0.002181825,0.002204722,0.00221947,0.002225512,0.002222627,0.002210592,0.002189417,0.002160749,0.002120703,0.002072133,0.002014114,0.001946717,0.001869898,0.00178104,0.001694843,0.001587127,0.001473018,0.001351315,0.001221885,0.001084887,0.000940236,0.000789156,0.000630868,0.000466369,0.000296231,0.000120921,-5.90E-05,-0.000243229,-0.000430753,-0.000621266,-0.000813979,-0.001008133,-0.001203022,-0.001397915,-0.001592179,-0.001784897,-0.001975404,-0.002162884,-0.002346521,-0.002525515,-0.002699063,-0.002866434,-0.003026741,-0.003179221,-0.003323064,-0.003457499,-0.003581742,-0.003695036,-0.003796688,-0.003885939,-0.003962107,-0.004024502,-0.004072525,-0.004105548,-0.004122982,-0.004124302,-0.004108981,-0.004076568,-0.004026585,-0.003958728,-0.003872632,-0.003767995,-0.003644566,-0.003502149,-0.003340657,-0.003159888,-0.002959927,-0.002740745,-0.002502388,-0.002244927,-0.001968531,-0.00167361,-0.0013602,-0.001028866,-0.000679956,-0.000313905,6.89E-05,0.000467917,0.000881953,0.00131104,0.001754032,0.002210273,0.002679033,0.003159801,0.003653452,0.004153453,0.004664225,0.005182713,0.005708098,0.006239299,0.00677453,0.007317705,0.00785711,0.008400166,0.008944082,0.009487262,0.010028369,0.010565955,0.011099421,0.011626622,0.012147006,0.012659404,0.013162566,0.013655315,0.014136406,0.014604999,0.015059729,0.0154997,0.01592392,0.016331358,0.016721031,0.017091935,0.017443331,0.017774267,0.018083997,0.01837179,0.018636949,0.018878829,0.019096796,0.01929041,0.019459164,0.019602663,0.019720547,0.01981254,0.019878416,0.019917983,0.019931188,0.019917983,0.019878416,0.01981254,0.019720547,0.019602663,0.019459164,0.01929041,0.019096796,0.018878829,0.018636949,0.01837179,0.018083997,0.017774267,0.017443331,0.017091935,0.016721031,0.016331358,0.01592392,0.0154997,0.015059729,0.014604999,0.014136406,0.013655315,0.013162566,0.012659404,0.012147006,0.011626622,0.011099421,0.010565955,0.010028369,0.009487262,0.008944082,0.008400166,0.00785711,0.007317705,0.00677453,0.006239299,0.005708098,0.005182713,0.004664225,0.004153453,0.003653452,0.003159801,0.002679033,0.002210273,0.001754032,0.00131104,0.000881953,0.000467917,6.89E-05,-0.000313905,-0.000679956,-0.001028866,-0.0013602,-0.00167361,-0.001968531,-0.002244927,-0.002502388,-0.002740745,-0.002959927,-0.003159888,-0.003340657,-0.003502149,-0.003644566,-0.003767995,-0.003872632,-0.003958728,-0.004026585,-0.004076568,-0.004108981,-0.004124302,-0.004122982,-0.004105548,-0.004072525,-0.004024502,-0.003962107,-0.003885939,-0.003796688,-0.003695036,-0.003581742,-0.003457499,-0.003323064,-0.003179221,-0.003026741,-0.002866434,-0.002699063,-0.002525515,-0.002346521,-0.002162884,-0.001975404,-0.001784897,-0.001592179,-0.001397915,-0.001203022,-0.001008133,-0.000813979,-0.000621266,-0.000430753,-0.000243229,-5.90E-05,0.000120921,0.000296231,0.000466369,0.000630868,0.000789156,0.000940236,0.001084887,0.001221885,0.001351315,0.001473018,0.001587127,0.001694843,0.00178104,0.001869898,0.001946717,0.002014114,0.002072133,0.002120703,0.002160749,0.002189417,0.002210592,0.002222627,0.002225512,0.00221947,0.002204722,0.002181825,0.002150514,0.002111675,0.002065432,0.002012024,0.001951805,0.001885135,0.001812564,0.001734267,0.001650836,0.00156265,0.001470101,0.001373628,0.001273675,0.001170808,0.00106538,0.000957916,0.000848864,0.000738677,0.000627801,0.000516675,0.000405804,0.000295562,0.000186386,7.87E-05,-2.72E-05,-0.000130748,-0.000231721,-0.000329699,-0.000424375,-0.000515426,-0.000602595,-0.000685555,-0.000764071,-0.000837922,-0.000906897,-0.00097082,-0.001029495,-0.001082857,-0.001130696,-0.001172935,-0.001209512,-0.001240405,-0.0012656,-0.001284996,-0.001298771,-0.001306826,-0.001309251,-0.001306145,-0.001297681,-0.001284036,-0.001265021,-0.001241138,-0.001212289,-0.001178674,-0.001140481,-0.001098057,-0.001052027,-0.001001229,-0.000947123,-0.000889312,-0.000827979,-0.000763022,-0.000693286,-0.000659468,-0.000572903,-0.000502104,-0.000430491,-0.000357983,-0.00028482,-0.000210868,-0.000137972,-6.39E-05,9.52E-06,8.20E-05,0.000153502,0.000223757,0.000292757,0.00035988,0.000425398,0.000488846,0.000549965,0.000608602,0.000664598,0.000717907,0.000768197,0.000815509,0.000859663,0.000900536,0.000938062,0.000972188,0.001002942,0.001030189,0.00105397,0.001074263,0.001091072,0.001104416,0.001114336,0.001120927,0.001124197,0.001124244,0.001121144,0.001115026,0.001105986,0.001094143,0.001079655,0.001062633,0.001043237,0.001021592,0.00099792,0.000972359,0.000945077,0.000916256,0.000886078,0.000854754,0.000822411,0.000789334,0.000755673,0.000721602,0.000687284,0.000652917,0.00061877,0.000584866,0.000551546,0.000518923,0.000487145,0.000456325,0.000426634,0.00039853,0.000371759,0.000346777,0.000323617,0.000302355,0.000282947,0.000265253,0.000250835,0.000238051,0.000227875,0.0002202,0.000215102,0.000212643,-0.014142308 <!-- Add up to 1000 comma-separated values -->
+        </values>
+    </filter>
+</Filters>