qlsdk2 0.6.0__py3-none-any.whl → 0.6.0a1__py3-none-any.whl

qlsdk/rsc/device/arskindling.py

@@ -1,55 +1,133 @@
+
 from multiprocessing import Queue
-from typing import Literal
+from threading import Thread
+from time import sleep, time_ns
+from typing import Any, Dict, Literal
+
 from loguru import logger
 from qlsdk.persist import ARSKindlingEDFHandler
-from qlsdk.rsc.interface import IDevice
+from qlsdk.rsc.interface import IDevice, IParser
 from qlsdk.rsc.command import *
+from qlsdk.rsc.parser.base import TcpMessageParser
 from qlsdk.rsc.device.base import QLBaseDevice
 
-    
-def intersection_positions(A, B):
-    setB = set(B)
-    seen = set()
-    return [idx for idx, elem in enumerate(A) 
-            if elem in setB and elem not in seen and not seen.add(elem)]
- 
-def get_sorted_indices_basic(A, B):
-    """
-    找出数组A中存在于数组B的元素，并返回这些元素在A中的位置，且顺序与它们在B中的顺序一致。
-
-    参数:
-        A (list): 待查找的数组。
-        B (list): 作为参考的数组。
-
-    返回:
-        list: 一个列表，包含符合条件的元素在A中的索引，顺序与这些元素在B中的出现顺序一致。
-    """
-    # 1. 创建B中元素到其索引的映射
-    b_index_map = {value: idx for idx, value in enumerate(B)}
-    
-    # 2. 筛选A中存在于B的元素，并记录其在A中的索引及在B中的位置
-    # 使用列表推导式，同时避免重复元素干扰（如果B有重复，以第一次出现为准）
-    found_elements = []
-    for idx_a, value in enumerate(A):
-        if value in b_index_map:
-            # 记录: (该元素在A中的索引, 该元素在B中的索引)
-            found_elements.append((idx_a, b_index_map[value]))
-    
-    # 3. 根据元素在B中的位置进行排序
-    # 排序的依据是元组的第二个元素，即 b_index_map[value]
-    found_elements_sorted = sorted(found_elements, key=lambda x: x[1])
-    
-    # 4. 提取排序后在A中的索引，形成结果数组C
-    array_C = [item[0] for item in found_elements_sorted]
-    
-    return array_C
-   
 class ARSKindling(QLBaseDevice):
     
     device_type = 0x60 # C64RS设备类型标识符
     
     def __init__(self, socket):
         super().__init__(socket)
+        # self.socket = socket
+        
+        self._id = None
+        
+        # 设备信息
+        # self.device_id = None
+        # self.device_name = None
+        self._device_no = None
+        # self.software_version = None
+        # self.hardware_version = None
+        # self.connect_time = None
+        # self.current_time = None
+        # # mV
+        # self.voltage = None
+        # # %
+        # self.battery_remain = None
+        # # %
+        # self.battery_total = None
+        # persist
+        self._recording = False
+        self._storage_path = None
+        self._file_prefix = None
+        
+        # 可设置参数
+        # 采集：采样量程、采样率、采样通道
+        # 刺激：刺激电流、刺激频率、刺激时间、刺激通道
+        # 采样量程（mV）：188、375、563、750、1125、2250、4500
+        self._sample_range:Literal[188, 375, 563, 750, 1125, 2250, 4500] = 188        
+        # 采样率（Hz）：250、500、1000、2000、4000、8000、16000、32000
+        self._sample_rate:Literal[250, 500, 1000, 2000, 4000, 8000, 16000, 32000] = 500
+        self._physical_max = self._sample_range * 1000  # 物理最大值（uV）
+        self._physical_min = -self._sample_range * 1000  # 物理最小值（uV）
+        self._digital_max = 8388607
+        self._digital_min = -8388608
+        self._physical_range = self._physical_max - self._physical_min
+        self._digital_range = 16777215
+        self._acq_channels = None
+        self._acq_param = {
+            "sample_range": 188,
+            "sample_rate": 500,
+            "channels": [],
+        }
+        
+        self._stim_param = {
+            "stim_type": 0,                 # 刺激类型：0-所有通道参数相同, 1: 通道参数不同
+            "channels": [],
+            "param": [{
+                    "channel_id": 0,        #通道号 从0开始                          -- 必填
+                    "waveform": 3,          #波形类型：0-直流，1-交流 2-方波 3-脉冲   -- 必填
+                    "current": 1,           #电流强度(mA)                            -- 必填
+                    "duration": 30,         #平稳阶段持续时间(s)                      -- 必填
+                    "ramp_up": 5,           #上升时间(s) 默认0
+                    "ramp_down": 5,         #下降时间(s) 默认0
+                    "frequency": 500,       #频率(Hz) -- 非直流必填
+                    "phase_position": 0,    #相位 -- 默认0
+                    "duration_delay": "0",  #延迟启动时间(s) -- 默认0
+                    "pulse_width": 0,       #脉冲宽度(us) -- 仅脉冲类型电流有效， 默认100us
+                },
+                {
+                    "channel_id": 1,        #通道号 从0开始                          -- 必填
+                    "waveform": 3,          #波形类型：0-直流，1-交流 2-方波 3-脉冲   -- 必填
+                    "current": 1,           #电流强度(mA)                            -- 必填
+                    "duration": 30,         #平稳阶段持续时间(s)                      -- 必填
+                    "ramp_up": 5,           #上升时间(s) 默认0
+                    "ramp_down": 5,         #下降时间(s) 默认0
+                    "frequency": 500,       #频率(Hz) -- 非直流必填
+                    "phase_position": 0,    #相位 -- 默认0
+                    "duration_delay": "0",  #延迟启动时间(s) -- 默认0
+                    "pulse_width": 0,       #脉冲宽度(us) -- 仅脉冲类型电流有效， 默认100us
+                }
+            ]
+        }
+        
+        self.stim_paradigm = None
+                      
+        signal_info = {
+            "param" : None,
+            "start_time" : None,
+            "finished_time" : None,
+            "packet_total" : None,
+            "last_packet_time" : None,
+            "state" : 0
+        }
+        stim_info = {
+            
+        }
+        Impedance_info = {
+            
+        }
+        # 信号采集状态
+        # 信号数据包总数（一个信号采集周期内）
+        # 信号采集参数
+        # 电刺激状态
+        # 电刺激开始时间（最近一次）
+        # 电刺激结束时间（最近一次）
+        # 电刺激参数
+        # 启动数据解析线程
+        # 数据存储状态
+        # 存储目录
+        
+        # 
+        self.__signal_consumer: Dict[str, Queue[Any]]={}
+        self.__impedance_consumer: Dict[str, Queue[Any]]={}
+        
+        # EDF文件处理器
+        self._edf_handler = None       
+        self.storage_enable = True 
+        
+        # self.start_message_listening()
+        # self.start()
+        # self.parser.set_device(self)
         
         self.channel_mapping = {
             "A1": 55, "A2": 56, "A3": 53, "A4": 54, "A5": 51, "A6": 52, "A7": 49, "A8": 50,
@@ -65,75 +143,18 @@ class ARSKindling(QLBaseDevice):
             "D9": 9, "D10": 10, "D11": 11, "D12": 12, "D13": 13, "D14": 14, 
         }
         
-        self._channel_spilt = {
-            "A" : [55, 56, 53, 54, 51, 52, 49, 50, 57, 58, 59, 60, 61, 62],
-            "B" : [39, 40, 37, 38, 35, 36, 33, 34, 41, 42, 43, 44, 45, 46],
-            "C" : [23, 24, 21, 22, 19, 20, 17, 18, 25, 26, 27, 28, 29, 30],
-            "D" : [7, 8, 5, 6, 3, 4, 1, 2, 9, 10, 11, 12, 13, 14],
-        }
-        
-        self._channel_mapping = {
-            1: "7", 
-            2: "8",
-            3: "5", 
-            4: "6",
-            5: "3", 
-            6: "4",
-            7: "1", 
-            8: "2",
-            9: "9", 
-            10: "10",
-            11: "11", 
-            12: "12",
-            13: "13", 
-            14: "14",
-            
-            17: "7", 
-            18: "8",
-            19: "5", 
-            20: "6",
-            21: "3", 
-            22: "4",
-            23: "1", 
-            24: "2",
-            25: "9", 
-            26: "10",
-            27: "11", 
-            28: "12",
-            29: "13", 
-            30: "14",
-            
-            33: "7", 
-            34: "8",
-            35: "5", 
-            36: "6",
-            37: "3", 
-            38: "4",
-            39: "1", 
-            40: "2",
-            41: "9", 
-            42: "10",
-            43: "11", 
-            44: "12",
-            45: "13", 
-            46: "14",
-            
-            49: "7", 
-            50: "8",
-            51: "5", 
-            52: "6",
-            53: "3", 
-            54: "4",
-            55: "1", 
-            56: "2",
-            57: "9", 
-            58: "10",
-            59: "11", 
-            60: "12",
-            61: "13", 
-            62: "14"
-        }
-                
+    @property
+    def device_no(self):
+        return self._device_no
+    
+    @device_no.setter
+    def device_no(self, value: str):
+        self._device_no = value
+    
+    @property
+    def parser(self) -> IParser:
+        return self._parser
+    
     @classmethod
     def from_parent(cls, parent:IDevice) -> IDevice:
         rlt = cls(parent.socket)
@@ -147,8 +168,68 @@ class ARSKindling(QLBaseDevice):
         self._edf_handler.set_device_no(self.device_no)
         self._edf_handler.set_storage_path(self._storage_path)
         self._edf_handler.set_file_prefix(self._file_prefix if self._file_prefix else 'ARS')
-        logger.debug(f"EDF Handler initialized")
         
+    @property
+    def edf_handler(self):
+        if not self.storage_enable:
+            return None
+        
+        if self._edf_handler is None:
+            self.init_edf_handler() 
+            
+        return self._edf_handler  
+    
+    @property
+    def acq_channels(self):
+        if self._acq_channels is None:
+            self._acq_channels = [i for i in range(1, 63)]
+        return self._acq_channels
+    @property
+    def sample_range(self):
+        return self._sample_range if self._sample_range else 188
+    @property
+    def sample_rate(self):
+        return self._sample_rate if self._sample_rate else 500
+    @property
+    def resolution(self):
+        return 24
+    
+    @property
+    def signal_consumers(self):
+        return self.__signal_consumer
+    
+    @property
+    def impedance_consumers(self):
+        return self.__impedance_consumer
+    
+    # 设置记录文件路径
+    def set_storage_path(self, path):
+        self._storage_path = path
+       
+    # 设置记录文件名称前缀 
+    def set_file_prefix(self, prefix):
+        self._file_prefix = prefix
+        
+    # 接收socket消息
+    def accept(self):
+        while True:
+            # 缓冲去4M
+            data = self.socket.recv(4096*1024)
+            if not data:
+                logger.warning(f"设备{self.device_no}连接结束")
+                break
+            
+            self._parser.append(data)
+            
+       
+    # socket发送数据    
+    def send(self, data):
+        self.socket.sendall(data)
+    
+    # 设置刺激参数
+    def set_stim_param(self, param):
+        self.stim_paradigm = param
+    
     # 设置采集参数
     def set_acq_param(self, channels, sample_rate = 500, sample_range = 188):
         self._acq_param["original_channels"] = channels
@@ -168,157 +249,138 @@ class ARSKindling(QLBaseDevice):
         self._acq_param["sample_range"] = sample_range
         self._acq_channels = channels
         self._sample_rate = sample_rate
-        self._sample_range = sample_range     
+        self._sample_range = sample_range
     
-    # 设置阻抗通道
-    # {'A': [1,2,3], 'B':[1,2,3]}
-    def set_impedance_channels(self, channels):
+    # 通用配置-TODO
+    def set_config(self, key:str, val: str):
+        pass      
         
-        arr = []
+    def start_impedance(self):
+        logger.info("启动阻抗测量")  
+        msg = StartImpedanceCommand.build(self).pack()
+        logger.debug(f"start_impedance message is {msg.hex()}")
+        self.socket.sendall(msg)
+    
+    def stop_impedance(self):
+        logger.info("停止阻抗测量")  
+        msg = StopImpedanceCommand.build(self).pack()
+        logger.debug(f"stop_impedance message is {msg.hex()}")
+        self.socket.sendall(msg)
+    
+    def start_stimulation(self):
+        if self.stim_paradigm is None:
+            logger.warning("刺激参数未设置，请先设置刺激参数")
+            return
+        logger.info("启动电刺激")  
+        msg = StartStimulationCommand.build(self).pack()
+        logger.debug(f"start_stimulation message is {msg.hex()}")
+        self.socket.sendall(msg)
+        t = Thread(target=self._stop_stimulation_trigger, args=(self.stim_paradigm.duration,))
+        t.start()
         
-        # 根据映射关系做通道转换
-        for k in channels.keys():
-            if isinstance(channels[k], list):
-                temp = [k + str(i) for i in channels[k]]
-                arr += [self.channel_mapping.get(c, 1) for c in temp]
-            else:
-                arr += [k + str(channels[k])]
-                
-        self._impedance_channels = arr
+    def _stop_stimulation_trigger(self, duration):
+        delay = duration
+        while delay > 0:
+            sleep(1)
+            delay -= 1
+        logger.info(f"_stop_stimulation_trigger duration: {duration}")
+        if self._edf_handler:
+            self._edf_handler.trigger("stimulation should be stopped")
+        else:
+            logger.warning("stop stim trigger fail. no edf writer alive")
         
-    @property
-    def acq_channels(self):
-        if self._acq_channels is None:
-            self._acq_channels = [i for i in range(1, 63)]
-            
-        arr = []
-        for k in self._acq_channels.keys():
-            arr = list(arr + self._acq_channels[k])
-            
-        return list(set(arr))    
-    
-    def _produce_impedance(self, body: bytes):
-        # 分发阻抗数据包给订阅者
-        if len(self._impedance_consumer) > 0:
-            packet = self._impedance_wrapper(body)
-            real_data = self.__impedance_transfer(packet)
-            for topic, q in self._impedance_consumer.items():
-                try:
-                    # 队列满了就丢弃最早的数据
-                    if q.full(): 
-                        q.get()
-                    q.put(real_data, timeout=1)
-                except Exception as e:
-                    logger.error(f"impedance data put to queue exception: {str(e)}")
-                    
-    def _produce_signal(self, body: bytes):        
+    def stop_stimulation(self):
+        logger.info("停止电刺激")  
+        msg = StopStimulationCommand.pack()
+        logger.debug(f"stop_stimulation message is {msg.hex()}")
+        self.socket.sendall(msg)
         
-        # 处理信号数据
-        data = self._signal_wrapper(body)  
-        # logger.debug("pkg_id: {}, eeg len: {}".format(data.pkg_id, len(data.eeg)))
+    # 启动采集
+    def start_acquisition(self, recording = True):
+        logger.info("启动信号采集")  
+        self._recording = recording
+        # 设置数据采集参数
+        param_bytes = SetAcquisitionParamCommand.build(self).pack()
+        # 启动数据采集
+        start_bytes = StartAcquisitionCommand.build(self).pack()
+        msg = param_bytes + start_bytes
+        logger.debug(f"start_acquisition message is {msg.hex()}")
+        self.socket.sendall(msg)
         
-        trigger_positions = [index for index, value in enumerate(data.trigger) if value != 0]
-        if len(trigger_positions) > 0:
-            # logger.debug(f"Trigger触发点位置: {trigger_positions}, 触发点时间戳: {[data.time_stamp + int(pos * 1000 / data.sample_rate) for pos in trigger_positions]}")
-            for pos in trigger_positions:
-                self.trigger(self.trigger_info(data.trigger[pos]))
+    # 停止采集
+    def stop_acquisition(self):
+        logger.info("停止信号采集")  
+        msg = StopAcquisitionCommand.build(self).pack()
+        logger.debug(f"stop_acquisition message is {msg.hex()}")
+        self.socket.sendall(msg)
+        if self._edf_handler:
+            # 发送结束标识
+            self.edf_handler.write(None)
         
-        if len(self.signal_consumers) > 0 :
-            # 信号数字值转物理值
-            data.eeg_p = self.eeg2phy(np.array(data.eeg))        
+    # 订阅实时数据
+    def subscribe(self, topic:str=None, q : Queue=None, type : Literal["signal","impedance"]="signal"):  
+        logger.info(f"订阅{self.device_no}的数据流")    
+        # 数据队列
+        if q is None:
+            q = Queue(maxsize=1000)
+            
+        # 队列名称     
+        if topic is None:
+            topic = f"{type}_{time_ns()}"
         
-        real_data = self.__signal_transfer(data)   
-               
-        # 存储
-        if self.storage_enable:            
-            # 确保记录线程启动
-            if self._recording is False:
-                self._start_recording() 
-                
-            # 写入文件的缓存队列
-            if self._signal_cache is None:
-                self._signal_cache = Queue(1000000)  # 缓冲队列
-            tmp = real_data.copy()
-            self._signal_cache.put(tmp)
-                                    
-        if len(self.signal_consumers) > 0 :
-            # 订阅只返回物理值
-            real_data.eeg = real_data.eeg_p
-            # 发送数据包到订阅者
-            for q in list(self.signal_consumers.values()):
-                # 队列满了就丢弃最早的数据
-                if q.full(): 
-                    q.get()
-                    
-                q.put(real_data)      
-     
-    # 信号数据转换
-    def __impedance_transfer(self, packet: ImpedancePacket):
-        channels = {}
-        impedance = {}
-        #按分区拆分数据格式
-        for k in self._channel_spilt.keys():      
-            logger.trace(f'分区{k}的阻抗数据')   
-            c, d, p = self.__packet_filter(packet, self._channel_spilt[k], type='impedance')
-            if c is not None:
-                channels[k] = c
-                impedance[k] = d
-        packet.channels = channels
-        packet.impedance = impedance
+        # 订阅生理电信号数据
+        if type == "signal":
+            # topic唯一，用来区分不同的订阅队列（下同）
+            if topic in list(self.__signal_consumer.keys()):
+                logger.warning(f"exists {type} subscribe of {topic}")
+            else:
+                self.__signal_consumer[topic] = q
             
-        return packet
-      
-    # 信号数据转换
-    def __signal_transfer(self, packet: RscPacket):
-        channels = {}
-        eeg = {}
-        eeg_p = {}
-        #按分区拆分数据格式
-        for k in self._channel_spilt.keys():      
-            logger.trace(f'分区{k}, {self._channel_spilt[k]}')   
-            c, d, p = self.__packet_filter(packet, self._channel_spilt[k])
-            if c is not None:
-                channels[k] = c
-                eeg[k] = d
-            if p is not None:
-                eeg_p[k] = p
-        packet.channels = channels
-        packet.eeg = eeg
-        #物理值
-        if packet.eeg_p is not None:
-            packet.eeg_p = eeg_p
+        # 订阅阻抗数据
+        if type == "impedance":
+            if topic in list(self.__signal_consumer.keys()):
+                logger.warning(f"exists {type} subscribe of {topic}")
+            else:
+                self.__impedance_consumer[topic] = q
             
-        return packet
+        return topic, q
     
-    def __packet_filter(self, packet, channel_filter=None, type:Literal['signal','impedance']='signal'):
-        # 参数检查
-        if packet is None or channel_filter is None:
-            logger.warning("空数据，忽略")
-            return None, None, None
-        
-        channel_pos = get_sorted_indices_basic(packet.channels, channel_filter)
-        
-        if channel_pos is None or len(channel_pos) == 0 :
-            logger.trace(f"没有指定分区的通道，跳过")
-            return None, None, None
-        
-        # 分区数据包写入
-        
-        # 保留本分区的通道和数据
-        channels = [packet.channels[p] for p in channel_pos]
+    def trigger(self, desc):
+        if self._edf_handler:
+            self.edf_handler.trigger(desc)
+        else:
+            logger.warning("no edf handler, no place to recording trigger")
         
-        #阻抗数据
-        if type == 'impedance':
-            impedance = [packet.impedance[p] for p in channel_pos]
-            return [self._channel_mapping.get(channel_id, []) for channel_id in channels], impedance, None
-        
-        # 信号数据
-        eeg = [packet.eeg[p] for p in channel_pos]
-        eeg_p = None
-        if packet.eeg_p is not None:
-            eeg_p = [packet.eeg_p[p] for p in channel_pos]
+    
+    def gen_set_acquirement_param(self) -> bytes:
         
-        return [self._channel_mapping.get(channel_id, []) for channel_id in channels], eeg, eeg_p
+        arr = []
+        for k in self.acq_channels.keys():
+            arr = list(arr + self.acq_channels[k])
+            
+        arr = list(set(arr))
+        body = to_bytes(arr) 
+        body += self.sample_range.to_bytes(4, byteorder='little')
+        body += self.sample_rate.to_bytes(4, byteorder='little')
+        body += self.sample_num.to_bytes(4, byteorder='little')
+        body += self.resolution.to_bytes(1, byteorder='little')
+        body += bytes.fromhex('00')     
         
+        return body
+    
+    def __str__(self):
+        return f''' 
+            Device: 
+                Name: {self.device_no}, 
+                Type: {hex(self.device_type) if self.device_type else None}, 
+                ID: {self.device_id if self.device_id else None}, 
+                Software: {self.software_version}, 
+                Hardware: {self.hardware_version}, 
+                Connect Time: {self.connect_time},
+                Current Time: {self.current_time},
+                Voltage: {str(self.voltage) + "mV" if self.voltage else None},
+                Battery Remain: {str(self.battery_remain)+ "%" if self.battery_remain else None},
+                Battery Total: {str(self.battery_total) + "%" if self.battery_total else None}
+            '''