qiskit 1.4.1__cp39-abi3-macosx_11_0_arm64.whl → 2.0.0__cp39-abi3-macosx_11_0_arm64.whl

qiskit/transpiler/passes/scheduling/base_scheduler.py

@@ -1,310 +0,0 @@
-# This code is part of Qiskit.
-#
-# (C) Copyright IBM 2020.
-#
-# This code is licensed under the Apache License, Version 2.0. You may
-# obtain a copy of this license in the LICENSE.txt file in the root directory
-# of this source tree or at http://www.apache.org/licenses/LICENSE-2.0.
-#
-# Any modifications or derivative works of this code must retain this
-# copyright notice, and modified files need to carry a notice indicating
-# that they have been altered from the originals.
-
-"""Base circuit scheduling pass."""
-import warnings
-
-from qiskit.circuit import Delay, Gate, Measure, Reset
-from qiskit.circuit.parameterexpression import ParameterExpression
-from qiskit.dagcircuit import DAGOpNode, DAGCircuit, DAGOutNode
-from qiskit.transpiler.basepasses import TransformationPass
-from qiskit.transpiler.exceptions import TranspilerError
-from qiskit.transpiler.instruction_durations import InstructionDurations
-from qiskit.transpiler.passes.scheduling.time_unit_conversion import TimeUnitConversion
-from qiskit.transpiler.target import Target
-
-
-class BaseSchedulerTransform(TransformationPass):
-    """Base scheduler pass.
-
-    .. warning::
-
-        This base class is not part of the public interface for this module
-        it should not be used to develop new scheduling passes as the passes
-        which are using this are pending a future deprecation and subsequent
-        removal. If you are developing new scheduling passes look at the
-        ``BaseScheduler`` class instead which is used in the new scheduling
-        pass workflow.
-
-    Policy of topological node ordering in scheduling
-
-        The DAG representation of ``QuantumCircuit`` respects the node ordering also in the
-        classical register wires, though theoretically two conditional instructions
-        conditioned on the same register are commute, i.e. read-access to the
-        classical register doesn't change its state.
-
-        .. code-block:: text
-
-            qc = QuantumCircuit(2, 1)
-            qc.delay(100, 0)
-            qc.x(0).c_if(0, True)
-            qc.x(1).c_if(0, True)
-
-        The scheduler SHOULD comply with above topological ordering policy of the DAG circuit.
-        Accordingly, the `asap`-scheduled circuit will become
-
-        .. code-block:: text
-
-                 ┌────────────────┐   ┌───┐
-            q_0: ┤ Delay(100[dt]) ├───┤ X ├──────────────
-                 ├────────────────┤   └─╥─┘      ┌───┐
-            q_1: ┤ Delay(100[dt]) ├─────╫────────┤ X ├───
-                 └────────────────┘     ║        └─╥─┘
-                                   ┌────╨────┐┌────╨────┐
-            c: 1/══════════════════╡ c_0=0x1 ╞╡ c_0=0x1 ╞
-                                   └─────────┘└─────────┘
-
-        Note that this scheduling might be inefficient in some cases,
-        because the second conditional operation can start without waiting the delay of 100 dt.
-        However, such optimization should be done by another pass,
-        otherwise scheduling may break topological ordering of the original circuit.
-
-    Realistic control flow scheduling respecting for microarchitecture
-
-        In the dispersive QND readout scheme, qubit is measured with microwave stimulus to qubit (Q)
-        followed by resonator ring-down (depopulation). This microwave signal is recorded
-        in the buffer memory (B) with hardware kernel, then a discriminated (D) binary value
-        is moved to the classical register (C).
-        The sequence from t0 to t1 of the measure instruction interval might be modeled as follows:
-
-        .. code-block:: text
-
-            Q ░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-            B ░░▒▒▒▒▒▒▒▒░░░░░░░░░
-            D ░░░░░░░░░░▒▒▒▒▒▒░░░
-            C ░░░░░░░░░░░░░░░░▒▒░
-
-        However, ``QuantumCircuit`` representation is not enough accurate to represent
-        this model. In the circuit representation, thus ``Qubit`` is occupied by the
-        stimulus microwave signal during the first half of the interval,
-        and ``Clbit`` is only occupied at the very end of the interval.
-
-        This precise model may induce weird edge case.
-
-        .. code-block:: text
-
-                    ┌───┐
-            q_0: ───┤ X ├──────
-                    └─╥─┘   ┌─┐
-            q_1: ─────╫─────┤M├
-                 ┌────╨────┐└╥┘
-            c: 1/╡ c_0=0x1 ╞═╩═
-                 └─────────┘ 0
-
-        In this example, user may intend to measure the state of ``q_1``, after ``XGate`` is
-        applied to the ``q_0``. This is correct interpretation from viewpoint of
-        the topological node ordering, i.e. x gate node come in front of the measure node.
-        However, according to the measurement model above, the data in the register
-        is unchanged during the stimulus, thus two nodes are simultaneously operated.
-        If one `alap`-schedule this circuit, it may return following circuit.
-
-        .. code-block:: text
-
-                 ┌────────────────┐   ┌───┐
-            q_0: ┤ Delay(500[dt]) ├───┤ X ├──────
-                 └────────────────┘   └─╥─┘   ┌─┐
-            q_1: ───────────────────────╫─────┤M├
-                                   ┌────╨────┐└╥┘
-            c: 1/══════════════════╡ c_0=0x1 ╞═╩═
-                                   └─────────┘ 0
-
-        Note that there is no delay on ``q_1`` wire, and the measure instruction immediately
-        start after t=0, while the conditional gate starts after the delay.
-        It looks like the topological ordering between the nodes are flipped in the scheduled view.
-        This behavior can be understood by considering the control flow model described above,
-
-        .. code-block:: text
-
-            : Quantum Circuit, first-measure
-            0 ░░░░░░░░░░░░▒▒▒▒▒▒░
-            1 ░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-
-            : In wire q0
-            Q ░░░░░░░░░░░░░░░▒▒▒░
-            C ░░░░░░░░░░░░▒▒░░░░░
-
-            : In wire q1
-            Q ░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-            B ░░▒▒▒▒▒▒▒▒░░░░░░░░░
-            D ░░░░░░░░░░▒▒▒▒▒▒░░░
-            C ░░░░░░░░░░░░░░░░▒▒░
-
-        Since there is no qubit register (Q0, Q1) overlap, the node ordering is determined by the
-        shared classical register C. As you can see, the execution order is still
-        preserved on C, i.e. read C then apply ``XGate``, finally store the measured outcome in C.
-        Because ``DAGOpNode`` cannot define different durations for associated registers,
-        the time ordering of two nodes is inverted anyways.
-
-        This behavior can be controlled by ``clbit_write_latency`` and ``conditional_latency``.
-        The former parameter determines the delay of the register write-access from
-        the beginning of the measure instruction t0, and another parameter determines
-        the delay of conditional gate operation from t0 which comes from the register read-access.
-
-        Since we usually expect topological ordering and time ordering are identical
-        without the context of microarchitecture, both latencies are set to zero by default.
-        In this case, ``Measure`` instruction immediately locks the register C.
-        Under this configuration, the `alap`-scheduled circuit of above example may become
-
-        .. code-block:: text
-
-                    ┌───┐
-            q_0: ───┤ X ├──────
-                    └─╥─┘   ┌─┐
-            q_1: ─────╫─────┤M├
-                 ┌────╨────┐└╥┘
-            c: 1/╡ c_0=0x1 ╞═╩═
-                 └─────────┘ 0
-
-        If the backend microarchitecture supports smart scheduling of the control flow, i.e.
-        it may separately schedule qubit and classical register,
-        insertion of the delay yields unnecessary longer total execution time.
-
-        .. code-block:: text
-
-            : Quantum Circuit, first-xgate
-            0 ░▒▒▒░░░░░░░░░░░░░░░
-            1 ░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-
-            : In wire q0
-            Q ░▒▒▒░░░░░░░░░░░░░░░
-            C ░░░░░░░░░░░░░░░░░░░ (zero latency)
-
-            : In wire q1
-            Q ░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-            C ░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░ (zero latency, scheduled after C0 read-access)
-
-        However this result is much more intuitive in the topological ordering view.
-        If finite conditional latency is provided, for example, 30 dt, the circuit
-        is scheduled as follows.
-
-        .. code-block:: text
-
-                 ┌───────────────┐   ┌───┐
-            q_0: ┤ Delay(30[dt]) ├───┤ X ├──────
-                 ├───────────────┤   └─╥─┘   ┌─┐
-            q_1: ┤ Delay(30[dt]) ├─────╫─────┤M├
-                 └───────────────┘┌────╨────┐└╥┘
-            c: 1/═════════════════╡ c_0=0x1 ╞═╩═
-                                  └─────────┘ 0
-
-        with the timing model:
-
-        .. code-block:: text
-
-            : Quantum Circuit, first-xgate
-            0 ░░▒▒▒░░░░░░░░░░░░░░░
-            1 ░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-
-            : In wire q0
-            Q ░░▒▒▒░░░░░░░░░░░░░░░
-            C ░▒░░░░░░░░░░░░░░░░░░ (30dt latency)
-
-            : In wire q1
-            Q ░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-            C ░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░
-
-        See https://arxiv.org/abs/2102.01682 for more details.
-
-    """
-
-    CONDITIONAL_SUPPORTED = (Gate, Delay)
-
-    def __init__(
-        self,
-        durations: InstructionDurations = None,
-        clbit_write_latency: int = 0,
-        conditional_latency: int = 0,
-        target: Target = None,
-    ):
-        """Scheduler initializer.
-
-        Args:
-            durations: Durations of instructions to be used in scheduling
-            clbit_write_latency: A control flow constraints. Because standard superconducting
-                quantum processor implement dispersive QND readout, the actual data transfer
-                to the clbit happens after the round-trip stimulus signal is buffered
-                and discriminated into quantum state.
-                The interval ``[t0, t0 + clbit_write_latency]`` is regarded as idle time
-                for clbits associated with the measure instruction.
-                This defaults to 0 dt which is identical to Qiskit Pulse scheduler.
-            conditional_latency: A control flow constraints. This value represents
-                a latency of reading a classical register for the conditional operation.
-                The gate operation occurs after this latency. This appears as a delay
-                in front of the DAGOpNode of the gate.
-                This defaults to 0 dt.
-            target: The :class:`~.Target` representing the target backend, if both
-                ``durations`` and this are specified then this argument will take
-                precedence and ``durations`` will be ignored.
-        """
-        super().__init__()
-        self.durations = durations
-        # Ensure op node durations are attached and in consistent unit
-        if target is not None:
-            self.durations = target.durations()
-        self.requires.append(TimeUnitConversion(self.durations))
-
-        # Control flow constraints.
-        self.clbit_write_latency = clbit_write_latency
-        self.conditional_latency = conditional_latency
-
-        self.target = target
-
-    @staticmethod
-    def _get_node_duration(
-        node: DAGOpNode,
-        dag: DAGCircuit,
-    ) -> int:
-        """A helper method to get duration from node or calibration."""
-        indices = [dag.find_bit(qarg).index for qarg in node.qargs]
-
-        if dag._has_calibration_for(node):
-            # If node has calibration, this value should be the highest priority
-            cal_key = tuple(indices), tuple(float(p) for p in node.op.params)
-            duration = dag._calibrations_prop[node.op.name][cal_key].duration
-        else:
-            duration = node.op.duration
-
-        if isinstance(node.op, Reset):
-            warnings.warn(
-                "Qiskit scheduler assumes Reset works similarly to Measure instruction. "
-                "Actual behavior depends on the control system of your quantum backend. "
-                "Your backend may provide a plugin scheduler pass."
-            )
-        elif isinstance(node.op, Measure):
-            is_mid_circuit = not any(
-                isinstance(x, DAGOutNode) for x in dag.quantum_successors(node)
-            )
-            if is_mid_circuit:
-                warnings.warn(
-                    "Qiskit scheduler assumes mid-circuit measurement works as a standard instruction. "
-                    "Actual backend may apply custom scheduling. "
-                    "Your backend may provide a plugin scheduler pass."
-                )
-
-        if isinstance(duration, ParameterExpression):
-            raise TranspilerError(
-                f"Parameterized duration ({duration}) "
-                f"of {node.op.name} on qubits {indices} is not bounded."
-            )
-        if duration is None:
-            raise TranspilerError(f"Duration of {node.op.name} on qubits {indices} is not found.")
-
-        return duration
-
-    def _delay_supported(self, qarg: int) -> bool:
-        """Delay operation is supported on the qubit (qarg) or not."""
-        if self.target is None or self.target.instruction_supported("delay", qargs=(qarg,)):
-            return True
-        return False
-
-    def run(self, dag: DAGCircuit):
-        raise NotImplementedError

qiskit/transpiler/passes/scheduling/dynamical_decoupling.py

@@ -1,313 +0,0 @@
-# This code is part of Qiskit.
-#
-# (C) Copyright IBM 2021, 2024.
-#
-# This code is licensed under the Apache License, Version 2.0. You may
-# obtain a copy of this license in the LICENSE.txt file in the root directory
-# of this source tree or at http://www.apache.org/licenses/LICENSE-2.0.
-#
-# Any modifications or derivative works of this code must retain this
-# copyright notice, and modified files need to carry a notice indicating
-# that they have been altered from the originals.
-
-"""Dynamical Decoupling insertion pass."""
-
-import itertools
-import warnings
-
-import numpy as np
-from qiskit.circuit import Gate, Delay, Reset
-from qiskit.circuit.library.standard_gates import IGate, UGate, U3Gate
-from qiskit.dagcircuit import DAGOpNode, DAGInNode
-from qiskit.quantum_info.operators.predicates import matrix_equal
-from qiskit.synthesis.one_qubit import OneQubitEulerDecomposer
-from qiskit.transpiler.basepasses import TransformationPass
-from qiskit.transpiler.exceptions import TranspilerError
-from qiskit.transpiler.instruction_durations import InstructionDurations
-from qiskit.transpiler.passes.optimization import Optimize1qGates
-from qiskit.utils.deprecation import deprecate_func
-
-
-class DynamicalDecoupling(TransformationPass):
-    """Dynamical decoupling insertion pass.
-
-    This pass works on a scheduled, physical circuit. It scans the circuit for
-    idle periods of time (i.e. those containing delay instructions) and inserts
-    a DD sequence of gates in those spots. These gates amount to the identity,
-    so do not alter the logical action of the circuit, but have the effect of
-    mitigating decoherence in those idle periods.
-
-    As a special case, the pass allows a length-1 sequence (e.g. [XGate()]).
-    In this case the DD insertion happens only when the gate inverse can be
-    absorbed into a neighboring gate in the circuit (so we would still be
-    replacing Delay with something that is equivalent to the identity).
-    This can be used, for instance, as a Hahn echo.
-
-    This pass ensures that the inserted sequence preserves the circuit exactly
-    (including global phase).
-
-    .. plot::
-       :alt: Output from the previous code.
-       :include-source:
-
-        import numpy as np
-        from qiskit.circuit import QuantumCircuit
-        from qiskit.circuit.library import XGate
-        from qiskit.transpiler import PassManager, InstructionDurations
-        from qiskit.transpiler.passes import ALAPSchedule, DynamicalDecoupling
-        from qiskit.visualization import timeline_drawer
-
-        # Because the legacy passes do not propagate the scheduling information correctly, it is
-        # necessary to run a no-op "re-schedule" before the output circuits can be drawn.
-        def draw(circuit):
-            from qiskit import transpile
-
-            scheduled = transpile(
-                circuit,
-                optimization_level=0,
-                instruction_durations=InstructionDurations(),
-                scheduling_method="alap",
-            )
-            return timeline_drawer(scheduled)
-
-        circ = QuantumCircuit(4)
-        circ.h(0)
-        circ.cx(0, 1)
-        circ.cx(1, 2)
-        circ.cx(2, 3)
-        circ.measure_all()
-        durations = InstructionDurations(
-            [("h", 0, 50), ("cx", [0, 1], 700), ("reset", None, 10),
-             ("cx", [1, 2], 200), ("cx", [2, 3], 300),
-             ("x", None, 50), ("measure", None, 1000)]
-        )
-        # balanced X-X sequence on all qubits
-        dd_sequence = [XGate(), XGate()]
-        pm = PassManager([ALAPSchedule(durations),
-                          DynamicalDecoupling(durations, dd_sequence)])
-        circ_dd = pm.run(circ)
-        draw(circ_dd)
-
-        # Uhrig sequence on qubit 0
-        n = 8
-        dd_sequence = [XGate()] * n
-        def uhrig_pulse_location(k):
-            return np.sin(np.pi * (k + 1) / (2 * n + 2)) ** 2
-        spacing = []
-        for k in range(n):
-            spacing.append(uhrig_pulse_location(k) - sum(spacing))
-        spacing.append(1 - sum(spacing))
-        pm = PassManager(
-            [
-                ALAPSchedule(durations),
-                DynamicalDecoupling(durations, dd_sequence, qubits=[0], spacing=spacing),
-            ]
-        )
-        circ_dd = pm.run(circ)
-        draw(circ_dd)
-    """
-
-    @deprecate_func(
-        additional_msg=(
-            "Instead, use :class:`~.PadDynamicalDecoupling`, which performs the same "
-            "function but requires scheduling and alignment analysis passes to run prior to it."
-        ),
-        since="1.1.0",
-    )
-    def __init__(
-        self, durations, dd_sequence, qubits=None, spacing=None, skip_reset_qubits=True, target=None
-    ):
-        """Dynamical decoupling initializer.
-
-        Args:
-            durations (InstructionDurations): Durations of instructions to be
-                used in scheduling.
-            dd_sequence (list[Gate]): sequence of gates to apply in idle spots.
-            qubits (list[int]): physical qubits on which to apply DD.
-                If None, all qubits will undergo DD (when possible).
-            spacing (list[float]): a list of spacings between the DD gates.
-                The available slack will be divided according to this.
-                The list length must be one more than the length of dd_sequence,
-                and the elements must sum to 1. If None, a balanced spacing
-                will be used [d/2, d, d, ..., d, d, d/2].
-            skip_reset_qubits (bool): if True, does not insert DD on idle
-                periods that immediately follow initialized/reset qubits (as
-                qubits in the ground state are less susceptible to decoherence).
-            target (Target): The :class:`~.Target` representing the target backend, if both
-                  ``durations`` and this are specified then this argument will take
-                  precedence and ``durations`` will be ignored.
-        """
-        super().__init__()
-        self._durations = durations
-        self._dd_sequence = dd_sequence
-        self._qubits = qubits
-        self._spacing = spacing
-        self._skip_reset_qubits = skip_reset_qubits
-        self._target = target
-        if target is not None:
-            self._durations = target.durations()
-            for gate in dd_sequence:
-                if gate.name not in target.operation_names:
-                    raise TranspilerError(
-                        f"{gate.name} in dd_sequence is not supported in the target"
-                    )
-
-    def run(self, dag):
-        """Run the DynamicalDecoupling pass on dag.
-
-        Args:
-            dag (DAGCircuit): a scheduled DAG.
-
-        Returns:
-            DAGCircuit: equivalent circuit with delays interrupted by DD,
-                where possible.
-
-        Raises:
-            TranspilerError: if the circuit is not mapped on physical qubits.
-        """
-        if len(dag.qregs) != 1 or dag.qregs.get("q", None) is None:
-            raise TranspilerError("DD runs on physical circuits only.")
-
-        if dag.duration is None:
-            raise TranspilerError("DD runs after circuit is scheduled.")
-
-        durations = self._update_inst_durations(dag)
-
-        num_pulses = len(self._dd_sequence)
-        sequence_gphase = 0
-        if num_pulses != 1:
-            if num_pulses % 2 != 0:
-                raise TranspilerError("DD sequence must contain an even number of gates (or 1).")
-            noop = np.eye(2)
-            for gate in self._dd_sequence:
-                noop = noop.dot(gate.to_matrix())
-            if not matrix_equal(noop, IGate().to_matrix(), ignore_phase=True):
-                raise TranspilerError("The DD sequence does not make an identity operation.")
-            sequence_gphase = np.angle(noop[0][0])
-
-        if self._qubits is None:
-            self._qubits = set(range(dag.num_qubits()))
-        else:
-            self._qubits = set(self._qubits)
-
-        if self._spacing:
-            if sum(self._spacing) != 1 or any(a < 0 for a in self._spacing):
-                raise TranspilerError(
-                    "The spacings must be given in terms of fractions "
-                    "of the slack period and sum to 1."
-                )
-        else:  # default to balanced spacing
-            mid = 1 / num_pulses
-            end = mid / 2
-            self._spacing = [end] + [mid] * (num_pulses - 1) + [end]
-
-        for qarg in list(self._qubits):
-            for gate in self._dd_sequence:
-                if not self.__gate_supported(gate, qarg):
-                    self._qubits.discard(qarg)
-                    break
-
-        index_sequence_duration_map = {}
-        for physical_qubit in self._qubits:
-            dd_sequence_duration = 0
-            for index, gate in enumerate(self._dd_sequence):
-                gate = gate.to_mutable()
-                self._dd_sequence[index] = gate
-                gate.duration = durations.get(gate, physical_qubit)
-
-                dd_sequence_duration += gate.duration
-            index_sequence_duration_map[physical_qubit] = dd_sequence_duration
-
-        new_dag = dag.copy_empty_like()
-
-        for nd in dag.topological_op_nodes():
-            if not isinstance(nd.op, Delay):
-                new_dag.apply_operation_back(nd.op, nd.qargs, nd.cargs, check=False)
-                continue
-
-            dag_qubit = nd.qargs[0]
-            physical_qubit = dag.find_bit(dag_qubit).index
-            if physical_qubit not in self._qubits:  # skip unwanted qubits
-                new_dag.apply_operation_back(nd.op, nd.qargs, nd.cargs, check=False)
-                continue
-
-            pred = next(dag.predecessors(nd))
-            succ = next(dag.successors(nd))
-            if self._skip_reset_qubits:  # discount initial delays
-                if isinstance(pred, DAGInNode) or isinstance(pred.op, Reset):
-                    new_dag.apply_operation_back(nd.op, nd.qargs, nd.cargs, check=False)
-                    continue
-
-            dd_sequence_duration = index_sequence_duration_map[physical_qubit]
-            slack = nd.op.duration - dd_sequence_duration
-            if slack <= 0:  # dd doesn't fit
-                new_dag.apply_operation_back(nd.op, nd.qargs, nd.cargs, check=False)
-                continue
-
-            if num_pulses == 1:  # special case of using a single gate for DD
-                u_inv = self._dd_sequence[0].inverse().to_matrix()
-                theta, phi, lam, phase = OneQubitEulerDecomposer().angles_and_phase(u_inv)
-                # absorb the inverse into the successor (from left in circuit)
-                if isinstance(succ, DAGOpNode) and isinstance(succ.op, (UGate, U3Gate)):
-                    theta_r, phi_r, lam_r = succ.op.params
-                    succ.op.params = Optimize1qGates.compose_u3(
-                        theta_r, phi_r, lam_r, theta, phi, lam
-                    )
-                    sequence_gphase += phase
-                # absorb the inverse into the predecessor (from right in circuit)
-                elif isinstance(pred, DAGOpNode) and isinstance(pred.op, (UGate, U3Gate)):
-                    theta_l, phi_l, lam_l = pred.op.params
-                    pred.op.params = Optimize1qGates.compose_u3(
-                        theta, phi, lam, theta_l, phi_l, lam_l
-                    )
-                    sequence_gphase += phase
-                # don't do anything if there's no single-qubit gate to absorb the inverse
-                else:
-                    new_dag.apply_operation_back(nd.op, nd.qargs, nd.cargs, check=False)
-                    continue
-
-            # insert the actual DD sequence
-            taus = [int(slack * a) for a in self._spacing]
-            unused_slack = slack - sum(taus)  # unused, due to rounding to int multiples of dt
-            middle_index = int((len(taus) - 1) / 2)  # arbitrary: redistribute to middle
-            taus[middle_index] += unused_slack  # now we add up to original delay duration
-
-            for tau, gate in itertools.zip_longest(taus, self._dd_sequence):
-                if tau > 0:
-                    new_dag.apply_operation_back(Delay(tau), [dag_qubit], check=False)
-                if gate is not None:
-                    new_dag.apply_operation_back(gate, [dag_qubit], check=False)
-
-            new_dag.global_phase = new_dag.global_phase + sequence_gphase
-
-        return new_dag
-
-    def _update_inst_durations(self, dag):
-        """Update instruction durations with circuit information. If the dag contains gate
-        calibrations and no instruction durations were provided through the target or as a
-        standalone input, the circuit calibration durations will be used.
-        The priority order for instruction durations is: target > standalone > circuit.
-        """
-        circ_durations = InstructionDurations()
-
-        if dag._calibrations_prop:
-            cal_durations = []
-            with warnings.catch_warnings():
-                warnings.simplefilter(action="ignore", category=DeprecationWarning)
-                # `schedule.duration` emits pulse deprecation warnings which we don't want
-                # to see here
-                for gate, gate_cals in dag._calibrations_prop.items():
-                    for (qubits, parameters), schedule in gate_cals.items():
-                        cal_durations.append((gate, qubits, parameters, schedule.duration))
-            circ_durations.update(cal_durations, circ_durations.dt)
-
-        if self._durations is not None:
-            circ_durations.update(self._durations, getattr(self._durations, "dt", None))
-
-        return circ_durations
-
-    def __gate_supported(self, gate: Gate, qarg: int) -> bool:
-        """A gate is supported on the qubit (qarg) or not."""
-        if self._target is None or self._target.instruction_supported(gate.name, qargs=(qarg,)):
-            return True
-        return False