qilisdk 0.1.8__cp313-cp313-win32.whl

qilisdk/utils/openqasm2.py

@@ -0,0 +1,215 @@
+# Copyright 2025 Qilimanjaro Quantum Tech
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+import re
+from pathlib import Path
+
+from qilisdk.digital.circuit import Circuit
+from qilisdk.digital.exceptions import UnsupportedGateError
+from qilisdk.digital.gates import CNOT, CZ, RX, RY, RZ, U1, U2, U3, Gate, H, M, S, T, X, Y, Z
+
+OPENQASM2_MAP: dict[type[Gate], str] = {
+    X: "x",
+    Y: "y",
+    Z: "z",
+    H: "h",
+    S: "s",
+    T: "t",
+    RX: "rx",
+    RY: "ry",
+    RZ: "rz",
+    U1: "u1",
+    U2: "u2",
+    U3: "u3",
+    CNOT: "cx",
+    CZ: "cz",
+}
+
+
+def to_qasm2(circuit: Circuit) -> str:
+    """
+    Convert the circuit to an OpenQASM 2.0 formatted string.
+
+    Args:
+        circuit: The circuit to convert to OpenQASM 2.0.
+
+    Returns:
+        str: The OpenQASM 2.0 representation of the circuit.
+    """
+    qasm_lines: list[str] = []
+    # QASM header, standard library and quantum register.
+    qasm_lines.extend(("OPENQASM 2.0;", 'include "qelib1.inc";', f"qreg q[{circuit.nqubits}];"))
+
+    # If any measurement is present, declare a classical register.
+    if any(isinstance(gate, M) for gate in circuit.gates):
+        qasm_lines.append(f"creg c[{circuit.nqubits}];")
+
+    # Process each gate.
+    for gate in circuit.gates:
+        # Special conversion for measurement.
+        if isinstance(gate, M):
+            if len(gate.target_qubits) == circuit.nqubits:
+                qasm_lines.append("measure q -> c;")
+            else:
+                # Generate a measurement for each target qubit.
+                measurements = (f"measure q[{q}] -> c[{q}];" for q in gate.target_qubits)
+                qasm_lines.extend(measurements)
+        else:
+            # Map the internal gate name to its QASM equivalent.
+            qasm_name = OPENQASM2_MAP.get(type(gate), gate.name.lower())
+            # Format parameter string, if any.
+            param_str = ""
+            if gate.is_parameterized:
+                parameters = ", ".join(str(p) for p in gate.get_parameter_values())
+                param_str = f"({parameters})"
+            # Format qubit operands.
+            qubit_str = ", ".join(f"q[{q}]" for q in gate.qubits)
+            qasm_lines.append(f"{qasm_name}{param_str} {qubit_str};")
+
+    return "\n".join(qasm_lines)
+
+
+def to_qasm2_file(circuit: Circuit, filename: str) -> None:
+    """
+    Save the QASM representation to a file.
+
+    Args:
+        circuit: The circuit to convert to OpenQASM 2.0.
+        filename (str): The path to the file where the QASM code will be saved.
+    """
+    qasm_code = to_qasm2(circuit)
+    Path(filename).write_text(qasm_code, encoding="utf-8")
+
+
+# TODO(vyron): Add full support for OpenQASM 2.0 grammar.
+def from_qasm2(qasm_str: str) -> Circuit:
+    """
+    Parse an OpenQASM 2.0 string and create a corresponding Circuit instance.
+
+    This parser supports the following instructions:
+        - Quantum register declaration (e.g., "qreg q[3];")
+        - Classical register declaration (ignored)
+        - Gate instructions (one-qubit and two-qubit gates)
+        - Measurement instructions (e.g., "measure q[0] -> c[0];")
+
+    Args:
+        qasm_str (str): The QASM string to parse.
+
+    Returns:
+        Circuit: The constructed Circuit object.
+    """  # noqa: DOC501
+    # Mapping from QASM gate names (lowercase) to internal gate names.
+    reverse_qasm2_map = {v: k for k, v in OPENQASM2_MAP.items()}
+
+    circuit = None
+    lines = qasm_str.splitlines()
+    for raw_line in lines:
+        line = raw_line.strip()
+        if not line or line.startswith("//"):
+            continue
+        # Skip header and include lines.
+        if line.startswith(("OPENQASM", "include")):
+            continue
+        # Parse quantum register declaration.
+        if line.startswith("qreg"):
+            # e.g., "qreg q[3];"
+            m = re.match(r"qreg\s+\w+\[(\d+)\];", line)
+            if m:
+                nqubits = int(m.group(1))
+                circuit = Circuit(nqubits)
+            continue
+        # Skip classical register declaration.
+        if line.startswith("creg"):
+            continue
+        # Process measurement instructions.
+        if line.startswith("measure"):
+            # e.g., "measure q[0] -> c[0];"
+            m = re.match(r"measure\s+q\[(\d+)\]\s*->\s*c\[\d+\];", line)
+            if m:
+                # TODO(vyron): Check consecutive lines of measurement and combine into single M.
+                q_index = int(m.group(1))
+                if circuit is None:
+                    raise ValueError("Quantum register must be declared before measurement.")
+                circuit.add(M(q_index))
+            else:
+                # Special case: "measure q -> c;" means measure all qubits
+                m_all = re.match(r"measure\s+q\s*->\s*c\s*;", line)
+                if m_all:
+                    if circuit is None:
+                        raise ValueError("Quantum register must be declared before measurement.")
+                    circuit.add(M(*list(range(circuit.nqubits))))
+            continue
+        # Process gate instructions.
+        # Pattern breakdown:
+        #   Group 1: gate name (e.g., "h", "rx", "cx")
+        #   Group 2: optional parameters (inside parentheses)
+        #   Group 3: operand list (e.g., "q[0]" or "q[0], q[1]")
+        m = re.match(r"^(\w+)(?:\(([^)]*)\))?\s+(.+);", line)
+        if m:
+            qasm_gate_name = m.group(1)
+            params_str = m.group(2)
+            operands_str = m.group(3)
+
+            # Convert QASM gate name to internal gate name.
+            gate_class = reverse_qasm2_map.get(qasm_gate_name.lower())
+            if gate_class is None:
+                raise UnsupportedGateError(f"Unknown gate: {qasm_gate_name}")
+
+            # Extract qubit indices.
+            qubit_matches = re.findall(r"q\[(\d+)\]", operands_str)
+            qubits = [int(q) for q in qubit_matches]
+
+            # Parse parameters, if any.
+            parameters = []
+            if params_str:
+                parameters = [float(p.strip()) for p in params_str.split(",") if p.strip()]
+
+            # Instantiate the gate based on the number of qubits.
+            # For one-qubit gates.
+            if len(qubits) == 1:
+                if gate_class.PARAMETER_NAMES:
+                    # Build a dictionary of parameter names to values.
+                    param_dict = {name: parameters[i] for i, name in enumerate(gate_class.PARAMETER_NAMES)}
+                    gate_instance = gate_class(qubits[0], **param_dict)
+                else:
+                    gate_instance = gate_class(qubits[0])
+            # For two-qubit gates.
+            elif len(qubits) == 2:  # noqa: PLR2004
+                if gate_class.PARAMETER_NAMES:
+                    param_dict = {name: parameters[i] for i, name in enumerate(gate_class.PARAMETER_NAMES)}
+                    gate_instance = gate_class(qubits[0], qubits[1], **param_dict)
+                else:
+                    gate_instance = gate_class(qubits[0], qubits[1])
+            else:
+                raise UnsupportedGateError("Only one- and two-qubit gates are supported.")
+
+            if circuit is None:
+                raise ValueError("Quantum register must be declared before adding gates.")
+            circuit.add(gate_instance)
+    if circuit is None:
+        raise ValueError("No quantum register declaration found in QASM.")
+    return circuit
+
+
+def from_qasm2_file(filename: str) -> Circuit:
+    """
+    Read an OpenQASM 2.0 file and create a corresponding Circuit instance.
+
+    Args:
+        filename (str): The path to the QASM file.
+
+    Returns:
+        Circuit: The reconstructed Circuit object.
+    """
+    qasm_str = Path(filename).read_text(encoding="utf-8")
+    return from_qasm2(qasm_str)

qilisdk/utils/serialization.py

@@ -0,0 +1,128 @@
+# Copyright 2025 Qilimanjaro Quantum Tech
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# ruff: noqa: ANN401
+
+from io import StringIO
+from pathlib import Path
+from typing import Any, TypeVar, overload
+
+from qilisdk.yaml import yaml
+
+T = TypeVar("T")
+
+
+class SerializationError(Exception):
+    """Custom exception for serialization errors."""
+
+
+class DeserializationError(Exception):
+    """Custom exception for deserialization errors."""
+
+
+def serialize(obj: Any) -> str:
+    """Serialize an object to a YAML string.
+
+    Args:
+        obj (Any): The object to serialize.
+
+    Raises:
+        SerializationError: If serialization fails.
+
+    Returns:
+        str: The serialized YAML string.
+    """
+    try:
+        with StringIO() as stream:
+            yaml.dump(obj, stream)
+            return stream.getvalue()
+    except Exception as e:
+        raise SerializationError(f"Failed to serialize object {e}") from e
+
+
+def serialize_to(obj: Any, file: str) -> None:
+    """Serialize an object to a YAML file.
+
+    Args:
+        obj (Any): The object to serialize.
+        file (str): The file path where the YAML data will be written.
+
+    Raises:
+        SerializationError: If serialization to file fails.
+    """
+    try:
+        yaml.dump(obj, Path(file))
+    except Exception as e:
+        raise SerializationError(f"Failed to serialize object {e} to file {file}") from e
+
+
+@overload
+def deserialize(string: str) -> Any: ...
+
+
+@overload
+def deserialize(string: str, cls: type[T]) -> T: ...
+
+
+def deserialize(string: str, cls: type[T] | None = None) -> Any | T:
+    """Deserialize a YAML string to an object.
+
+    Args:
+        string (str): The YAML string to deserialize.
+        cls (type[T], optional): The class type to cast the deserialized object to. Defaults to None.
+
+    Raises:
+        DeserializationError: If deserialization fails or the resulting object is not of the specified type.
+
+    Returns:
+        Any | T: The deserialized object, optionally cast to the specified class type.
+    """
+    try:
+        with StringIO(string) as stream:
+            result = yaml.load(stream)
+    except Exception as e:
+        raise DeserializationError(f"Failed to deserialize YAML string: {e}") from e
+    if cls is not None and not isinstance(result, cls):
+        raise DeserializationError(f"Deserialized object is not of type {cls.__name__}")
+    return result
+
+
+@overload
+def deserialize_from(file: str) -> Any: ...
+
+
+@overload
+def deserialize_from(file: str, cls: type[T]) -> T: ...
+
+
+def deserialize_from(file: str, cls: type[T] | None = None) -> Any | T:
+    """Deserialize a YAML file to an object.
+
+    Args:
+        file (str): The file path of the YAML file to deserialize.
+        cls (type[T], optional): The class type to cast the deserialized object to. Defaults to None.
+
+    Raises:
+        DeserializationError: If deserialization fails or the resulting object is not of the specified type.
+
+    Returns:
+        Any | T: The deserialized object, optionally cast to the specified class type.
+    """
+    try:
+        result = yaml.load(Path(file))
+    except Exception as e:
+        raise DeserializationError(f"Failed to deserialize YAML string {e} from file {file}") from e
+    if cls is not None and not isinstance(result, cls):
+        raise DeserializationError(f"Deserialized object is not of type {cls.__name__}")
+    return result

qilisdk/utils/trotterization/__init__.py

@@ -0,0 +1,18 @@
+# Copyright 2026 Qilimanjaro Quantum Tech
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+from .trotterization import trotter_evolution
+
+__all__ = ["trotter_evolution"]

qilisdk/utils/trotterization/trotterization.py

@@ -0,0 +1,127 @@
+# Copyright 2026 Qilimanjaro Quantum Tech
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+from __future__ import annotations
+
+from typing import Iterator, TypeAlias
+
+from numpy import pi
+
+from qilisdk.analog.hamiltonian import Hamiltonian, PauliOperator
+from qilisdk.core.variables import Domain, Parameter, Term
+from qilisdk.digital.gates import CNOT, RX, RZ, BasicGate, H
+
+CommutingParts: TypeAlias = list[dict[tuple[PauliOperator, ...], complex | Term | Parameter]]
+TimeParameter: TypeAlias = complex | Term | Parameter
+GateIterator: TypeAlias = Iterator[BasicGate | CNOT]
+
+
+def _pauli_evolution(
+    term: tuple[PauliOperator, ...],
+    coeff: complex | Term | Parameter,
+    time: complex | Term | Parameter,
+) -> Iterator[BasicGate | CNOT]:
+    """
+    An iterator of parameterized gates performing the evolution of a given Pauli string.
+
+    Args:
+        term (tuple[PauliOperator, ...]): The Pauli string to evolve under.
+        coeff (complex | Term | Parameter): The coefficient of the Pauli string.
+        time (complex | Term | Parameter): The evolution time parameter (gamma or alpha).
+
+    Yields:
+        Iterator[BasicGate]: Gates implementing the evolution under the Pauli string.
+    """
+
+    qubit_indices = [pauli.qubit for pauli in term if pauli.name != "I"]
+    if len(qubit_indices) == 0:
+        return
+
+    # Move everything to Z basis
+    for pauli in term:
+        q = pauli.qubit
+        name = pauli.name
+        if name == "X":
+            yield H(q)
+        elif name == "Y":
+            gate_val = pi / 2
+            yield RX(q, theta=Parameter("fixed_" + str(gate_val), gate_val, Domain.REAL, (gate_val, gate_val)))
+
+    # Apply CNOT ladder
+    for i in range(len(qubit_indices) - 1):
+        yield CNOT(qubit_indices[i], qubit_indices[i + 1])
+
+    # Apply RZ rotation on last qubit
+    last_qubit = qubit_indices[-1]
+    if isinstance(coeff, complex):
+        coeff = coeff.real
+    if isinstance(time, complex):
+        time = time.real
+    yield RZ(last_qubit, phi=(2 * coeff * time))
+
+    # Undo CNOT ladder
+    for i in reversed(range(len(qubit_indices) - 1)):
+        yield CNOT(qubit_indices[i], qubit_indices[i + 1])
+
+    # Move back from Z basis
+    for pauli in term:
+        q = pauli.qubit
+        name = pauli.name
+        if name == "X":
+            yield H(q)
+        elif name == "Y":
+            gate_val = -pi / 2
+            yield RX(q, theta=Parameter("fixed_" + str(gate_val), gate_val, Domain.REAL, (gate_val, gate_val)))
+
+
+def trotter_evolution(
+    hamiltonian: Hamiltonian,
+    time: TimeParameter,
+    trotter_steps: int,
+) -> GateIterator:
+    """
+    An iterator of parameterized gates performing Trotterized evolution of a commuting Hamiltonian part.
+
+    Args:
+        hamiltonian (Hamiltonian): Hamiltonian object to be trotterized.
+        time (complex | Term | Parameter): The evolution time parameter.
+        trotter_steps (int): Number of Trotter steps.
+
+    Yields:
+        Iterator[BasicGate]: Gates implementing the Trotterized evolution.
+    """
+    commuting_parts = hamiltonian.get_commuting_partitions()
+    yield from _commuting_trotter_evolution(commuting_parts=commuting_parts, time=time, trotter_steps=trotter_steps)
+
+
+def _commuting_trotter_evolution(
+    commuting_parts: CommutingParts,
+    time: TimeParameter,
+    trotter_steps: int,
+) -> GateIterator:
+    """
+    An iterator of parameterized gates performing Trotterized evolution of a commuting Hamiltonian part.
+
+    Args:
+        commuting_parts (CommutingParts): List of commuting Hamiltonian parts.
+        time (TimeParameter): The evolution time parameter.
+        trotter_steps (int): Number of Trotter steps.
+
+    Yields:
+        Iterator[BasicGate]: Gates implementing the Trotterized evolution.
+    """
+    for _ in range(trotter_steps):
+        for part in commuting_parts:
+            for term, coeff in part.items():
+                for gate in _pauli_evolution(term, coeff / trotter_steps, time):
+                    yield gate

qilisdk/utils/visualization/__init__.py

@@ -0,0 +1,24 @@
+# Copyright 2025 Qilimanjaro Quantum Tech
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from .style import CircuitStyle, ScheduleStyle
+from .themes import Theme, dark, light
+
+__all__ = [
+    "CircuitStyle",
+    "ScheduleStyle",
+    "Theme",
+    "dark",
+    "light",
+]