pypcapkit 1.3.5.post13__cp313-none-any.whl → 1.3.5.post15__cp313-none-any.whl

pcapkit/__init__.py

@@ -121,4 +121,4 @@ __all__ = [
 ]
 
 #: version number
-__version__ = '1.3.5.post13'
+__version__ = '1.3.5.post15'

pcapkit/const/reg/apptype.py

@@ -3050,14 +3050,13 @@ class AppType(StrEnum):
     #: [TCP] Reserved
     reserved_914: 'AppType' = 914, 'reserved', TransportProtocol.get('tcp')
 
-    #: [UDP] Routing in Fat Trees Link Information Element [RFC-ietf-rift-rift-24]
+    #: [UDP] Routing in Fat Trees Link Information Element [:rfc:`9692`]
     rift_lies: 'AppType' = 914, 'rift-lies', TransportProtocol.get('udp')
 
     #: [TCP] Reserved
     reserved_915: 'AppType' = 915, 'reserved', TransportProtocol.get('tcp')
 
-    #: [UDP] Routing in Fat Trees Topology Information Element [RFC-ietf-rift-
-    #: rift-24]
+    #: [UDP] Routing in Fat Trees Topology Information Element [:rfc:`9692`]
     rift_ties: 'AppType' = 915, 'rift-ties', TransportProtocol.get('udp')
 
     #: [TCP] BIND9 remote name daemon controller

pcapkit/const/reg/linktype.py

@@ -28,7 +28,7 @@ class LinkType(IntEnum):
     #: [``DLT_EN3MB``] Experimental Ethernet (3Mb).
     EXP_ETHERNET = 2
 
-    #: [``DLT_AX25``] AX.25 packet, with nothing preceding it.
+    #: [``DLT_AX25``] AX.25 layer 2 packets,
     AX25 = 3
 
     #: [``DLT_PRONET``] Reserved for Proteon ProNET Token Ring.
@@ -59,15 +59,13 @@ class LinkType(IntEnum):
     #: [``DLT_PPP_SERIAL``] PPP in HDLC-like framing.
     PPP_HDLC = 50
 
-    #: [``DLT_PPP_ETHER``] PPPoE; the packet begins with a PPPoE header, as per RFC
-    #: 2516.
+    #: [``DLT_PPP_ETHER``] PPPoE session packets.
     PPP_ETHER = 51
 
     #: [``DLT_SYMANTEC_FIREWALL``] Symantec Enterprise (ex-Axent Raptor) firewall.
     SYMANTEC_FIREWALL = 99
 
-    #: [``DLT_ATM_RFC1483``] RFC 1483 LLC/SNAP-encapsulated ATM; the packet begins
-    #: with an ISO 8802-2 (formerly known as IEEE 802.2) LLC header.
+    #: [``DLT_ATM_RFC1483``] LLC/SNAP-encapsulated ATM
     ATM_RFC1483 = 100
 
     #: [``DLT_RAW``] Raw IP; the packet begins with an IPv4 or IPv6 header, with
@@ -99,9 +97,7 @@ class LinkType(IntEnum):
     #: [``DLT_LINUX_SLL``] Linux "cooked" capture encapsulation.
     LINUX_SLL = 113
 
-    #: [``DLT_LTALK``] Apple LocalTalk; the packet begins with an AppleTalk
-    #: LocalTalk Link Access Protocol header, as described in chapter 1 of Inside
-    #: AppleTalk, Second Edition.
+    #: [``DLT_LTALK``] Apple LocalTalk packets.
     LTALK = 114
 
     #: [``DLT_ECONET``] Acorn Econet.
@@ -128,7 +124,7 @@ class LinkType(IntEnum):
     #: link-layer header.
     AIRONET_HEADER = 120
 
-    #: [``DLT_IP_OVER_FC``] IP and ATM over Fibre Channel, as per RFC 4338.
+    #: [``DLT_IP_OVER_FC``] IP and ATM over Fibre Channel.
     IP_OVER_FC = 122
 
     #: [``DLT_SUNATM``] ATM traffic captured from a SunATM device.
@@ -183,23 +179,16 @@ class LinkType(IntEnum):
     #: [``DLT_APPLE_IP_OVER_IEEE1394``] Apple IP-over-IEEE 1394 cooked header.
     APPLE_IP_OVER_IEEE1394 = 138
 
-    #: [``DLT_MTP2_WITH_PHDR``] Signaling System 7 Message Transfer Part Level 2,
-    #: as specified by ITU-T Recommendation Q.703, preceded by a pseudo-header.
+    #: [``DLT_MTP2_WITH_PHDR``] SS7 MTP2 packets, with a pseudo-header.
     MTP2_WITH_PHDR = 139
 
-    #: [``DLT_MTP2``] Signaling System 7 Message Transfer Part Level 2, as
-    #: specified by ITU-T Recommendation Q.703.
+    #: [``DLT_MTP2``] SS7 MTP2 packets.
     MTP2 = 140
 
-    #: [``DLT_MTP3``] Signaling System 7 Message Transfer Part Level 3, as
-    #: specified by ITU-T Recommendation Q.704, with no MTP2 header preceding the
-    #: MTP3 packet.
+    #: [``DLT_MTP3``] SS7 MTP3 packets.
     MTP3 = 141
 
-    #: [``DLT_SCCP``] Signaling System 7 Signalling Connection Control Part, as
-    #: specified by ITU-T Recommendation Q.711, ITU-T Recommendation Q.712, ITU-T
-    #: Recommendation Q.713, and ITU-T Recommendation Q.714, with no MTP3 or MTP2
-    #: headers preceding the SCCP packet.
+    #: [``DLT_SCCP``] SS7 SCCP packets.
     SCCP = 142
 
     #: [``DLT_DOCSIS``] DOCSIS MAC frames, as described by the DOCSIS 4.0 MAC and
@@ -271,15 +260,11 @@ class LinkType(IntEnum):
     #: [``DLT_JUNIPER_MONITOR``] Juniper Networks private data link type.
     JUNIPER_MONITOR = 164
 
-    #: [``DLT_BACNET_MS_TP``] BACnet MS/TP frames, as specified by section 9.3
-    #: MS/TP Frame Format of ANSI/ASHRAE Standard 135, BACnet® - A Data
-    #: Communication Protocol for Building Automation and Control Networks,
-    #: including the preamble and, if present, the Data CRC.
+    #: [``DLT_BACNET_MS_TP``] BACnet MS/TP frames.
     BACNET_MS_TP = 165
 
-    #: [``DLT_PPP_PPPD``] PPP in HDLC-like encapsulation, like LINKTYPE\_PPP\_HDLC,
-    #: but with the 0xff address byte replaced by a direction indication—0x00 for
-    #: incoming and 0x01 for outgoing.
+    #: [``DLT_PPP_PPPD``] PPP preceded by a direction octet and an HDLC-like
+    #: control field.
     PPP_PPPD = 166
 
     #: [``DLT_JUNIPER_PPPOE``] Juniper Networks private data link type.
@@ -309,10 +294,10 @@ class LinkType(IntEnum):
     #: [``DLT_JUNIPER_PIC_PEER``] Juniper Networks private data link type.
     JUNIPER_PIC_PEER = 174
 
-    #: [``DLT_ERF_ETH``] An ERF header followed by Ethernet.
+    #: [``DLT_ERF_ETH``] Endace ERF records of type TYPE\_ETH.
     ERF_ETH = 175
 
-    #: [``DLT_ERF_POS``] An ERF header followed by Packet-over-SONET.
+    #: [``DLT_ERF_POS``] Endace ERF records of type TYPE\_POS\_HDLC.
     ERF_POS = 176
 
     #: [``DLT_LINUX_LAPD``] Linux vISDN LAPD frames
@@ -367,7 +352,7 @@ class LinkType(IntEnum):
     #: is done by Linux drivers.
     IEEE802_15_4_LINUX = 191
 
-    #: [``DLT_PPI``] Per-Packet Information header precending packet data.
+    #: [``DLT_PPI``] Per-Packet Information header preceding packet data.
     PPI = 192
 
     #: [``DLT_IEEE802_16_MAC_CPS_RADIO``] IEEE 802.16 MAC Common Part Sublayer plus
@@ -383,8 +368,7 @@ class LinkType(IntEnum):
     #: [``DLT_SITA``] Various link-layer types, with a pseudo-header, for SITA.
     SITA = 196
 
-    #: [``DLT_ERF``] Various link-layer types, with a pseudo-header, for Endace DAG
-    #: cards; encapsulates Endace ERF records.
+    #: [``DLT_ERF``] Endace ERF records.
     ERF = 197
 
     #: [``DLT_RAIF1``] Special header prepended to Ethernet packets when capturing
@@ -402,8 +386,7 @@ class LinkType(IntEnum):
     #: packets with a direction pseudo-header.
     BLUETOOTH_HCI_H4_WITH_PHDR = 201
 
-    #: [``DLT_AX25_KISS``] AX.25 packet, with a 1-byte KISS header containing a
-    #: type indicator.
+    #: [``DLT_AX25_KISS``] KISS frames between a host and an AX.25 TNC.
     AX25_KISS = 202
 
     #: [``DLT_LAPD``] Q.921 LAPD frames.
@@ -511,8 +494,7 @@ class LinkType(IntEnum):
     #: [``DLT_JUNIPER_FIBRECHANNEL``] Juniper Networks private data link type.
     JUNIPER_FIBRECHANNEL = 234
 
-    #: [``DLT_DVB_CI``] DVB-CI messages, with the message format specified by the
-    #: PCAP format for DVB-CI specification.
+    #: [``DLT_DVB_CI``] DVB-CI messages, with a pseudo-header.
     DVB_CI = 235
 
     #: [``DLT_MUX27010``] Variant of 3GPP TS 27.010 multiplexing protocol.
@@ -535,12 +517,10 @@ class LinkType(IntEnum):
     #: header, preamble and SFD, preceded by a Hilscher.
     NETANALYZER_TRANSPARENT = 241
 
-    #: [``DLT_IPOIB``] IP-over-InfiniBand, as specified by RFC 4391 section 6.
+    #: [``DLT_IPOIB``] IP-over-InfiniBand.
     IPOIB = 242
 
-    #: [``DLT_MPEG_2_TS``] MPEG-2 Transport Stream transport packets, as specified
-    #: by ISO 13818-1/ITU-T Recommendation H.222.0 (see table 2-2 of section
-    #: 2.4.3.2 "Transport Stream packet layer").
+    #: [``DLT_MPEG_2_TS``] MPEG-2 Transport Stream transport packets.
     MPEG_2_TS = 243
 
     #: [``DLT_NG40``] Frames from ng4T GmbH's ng40 protocol tester.
@@ -553,9 +533,7 @@ class LinkType(IntEnum):
     #: Packet filter state syncing.
     PFSYNC = 246
 
-    #: [``DLT_INFINIBAND``] Raw InfiniBand frames, starting with the Local Routing
-    #: Header, as specified in Chapter 5 "Data packet format" of InfiniBand™
-    #: Architecture Specification Release 1.2.1 Volume 1 - General Specifications.
+    #: [``DLT_INFINIBAND``] InfiniBand data packets.
     INFINIBAND = 247
 
     #: [``DLT_SCTP``] SCTP packets, as defined by RFC 4960, with no lower-level
@@ -569,10 +547,7 @@ class LinkType(IntEnum):
     #: Laboratories "RTAC" product.
     RTAC_SERIAL = 250
 
-    #: [``DLT_BLUETOOTH_LE_LL``] Bluetooth Low Energy air interface Link Layer
-    #: packets, in the format described in section 2.1 "PACKET FORMAT" of volume 6
-    #: of the Bluetooth Specification Version 4.0 (see PDF page 2200), but without
-    #: the Preamble.
+    #: [``DLT_BLUETOOTH_LE_LL``] Bluetooth Low Energy link-layer packets.
     BLUETOOTH_LE_LL = 251
 
     #: [``DLT_WIRESHARK_UPPER_PDU``] Upper-protocol layer PDU saves from Wireshark;
@@ -590,26 +565,21 @@ class LinkType(IntEnum):
     #: baseband packets.
     BLUETOOTH_BREDR_BB = 255
 
-    #: [``DLT_BLUETOOTH_LE_LL_WITH_PHDR``] Bluetooth Low Energy link-layer packets.
+    #: [``DLT_BLUETOOTH_LE_LL_WITH_PHDR``] Bluetooth Low Energy link-layer packets,
+    #: with a pseudo-header.
     BLUETOOTH_LE_LL_WITH_PHDR = 256
 
-    #: [``DLT_PROFIBUS_DL``] PROFIBUS data link layer packets, as specified by IEC
-    #: standard 61158-4-3, beginning with the start delimiter, ending with the end
-    #: delimiter, and including all octets between them.
+    #: [``DLT_PROFIBUS_DL``] PROFIBUS data link layer packets.
     PROFIBUS_DL = 257
 
     #: [``DLT_PKTAP``] Apple PKTAP capture encapsulation.
     PKTAP = 258
 
-    #: [``DLT_EPON``] Ethernet-over-passive-optical-network packets, starting with
-    #: the last 6 octets of the modified preamble as specified by 65.1.3.2
-    #: "Transmit" in Clause 65 of Section 5 of IEEE 802.3, followed immediately by
-    #: an Ethernet frame.
+    #: [``DLT_EPON``] Ethernet-over-passive-optical-network packets, including
+    #: preamble octets.
     EPON = 259
 
-    #: [``DLT_IPMI_HPM_2``] IPMI trace packets, as specified by Table 3-20 "Trace
-    #: Data Block Format" in the PICMG HPM.2 specification. The time stamps for
-    #: packets in this format must match the time stamps in the Trace Data Blocks.
+    #: [``DLT_IPMI_HPM_2``] IPMI HPM.2 trace packets.
     IPMI_HPM_2 = 260
 
     #: [``DLT_ZWAVE_R1_R2``] Z-Wave RF profile R1 and R2 packets.
@@ -639,11 +609,7 @@ class LinkType(IntEnum):
     #: used in OpenBSD switch interface monitoring.
     OPENFLOW = 267
 
-    #: [``DLT_SDLC``] SDLC packets, as specified by Chapter 1, "DLC Links", section
-    #: "Synchronous Data Link Control (SDLC)" of Systems Network Architecture
-    #: Formats, GA27-3136-20, without the flag fields, zero-bit insertion, or Frame
-    #: Check Sequence field, containing SNA path information units (PIUs) as the
-    #: payload.
+    #: [``DLT_SDLC``] SNA SDLC packets
     SDLC = 268
 
     #: [``DLT_TI_LLN_SNIFFER``] TI LLN sniffer frames.
@@ -664,8 +630,7 @@ class LinkType(IntEnum):
     #: header giving metadata about the packet.
     DOCSIS31_XRA31 = 273
 
-    #: [``DLT_ETHERNET_MPACKET``] mPackets, as specified by IEEE 802.3br Figure
-    #: 99-4, starting with the preamble and always ending with a CRC field.
+    #: [``DLT_ETHERNET_MPACKET``] IEEE 802.3 mPackets.
     ETHERNET_MPACKET = 274
 
     #: [``DLT_DISPLAYPORT_AUX``] DisplayPort AUX channel monitoring messages.
@@ -706,9 +671,7 @@ class LinkType(IntEnum):
     #: inserted.
     DSA_TAG_EDSA = 285
 
-    #: [``DLT_ELEE``] Payload of lawful intercept packets using the ELEE protocol.
-    #: The packet begins with the ELEE header; it does not include any transport-
-    #: layer or lower-layer headers for protocols used to transport ELEE packets.
+    #: [``DLT_ELEE``] Reserved for ELEE lawful intercept protocol.
     ELEE = 286
 
     #: [``DLT_Z_WAVE_SERIAL``] Serial frames transmitted between a host and a
@@ -716,15 +679,10 @@ class LinkType(IntEnum):
     #: 5 of the Z-Wave Serial API Host Application Programming Guide.
     Z_WAVE_SERIAL = 287
 
-    #: [``DLT_USB_2_0``] USB 2.0, 1.1, or 1.0 packet, beginning with a PID, as
-    #: described by Chapter 8 "Protocol Layer" of the the Universal Serial Bus
-    #: Specification Revision 2.0. Deprecated in favor of speed specific USB 2.0,
-    #: 1.1, or 1.0 linktypes.
+    #: [``DLT_USB_2_0``] USB 2.0, 1.1, or 1.0 packets.
     USB_2_0 = 288
 
-    #: [``DLT_ATSC_ALP``] ATSC Link-Layer Protocol frames, as described in section
-    #: 5 of the A/330 Link-Layer Protocol specification, found at the ATSC 3.0
-    #: standards page, beginning with a Base Header.
+    #: [``DLT_ATSC_ALP``] ATSC Link-Layer Protocol frames.
     ATSC_ALP = 289
 
     #: [``DLT_ETW``] Event Tracing for Windows messages.
@@ -737,23 +695,16 @@ class LinkType(IntEnum):
     #: [``DLT_ZBOSS_NCP``] ZBOSS NCP Serial Protocol, with a pseudo-header.
     ZBOSS_NCP = 292
 
-    #: [``DLT_USB_2_0_LOW_SPEED``] Low-Speed USB 2.0, 1.1, or 1.0 packet, beginning
-    #: with a PID, as described by Chapter 8 "Protocol Layer" of the the Universal
-    #: Serial Bus Specification Revision 2.0.
+    #: [``DLT_USB_2_0_LOW_SPEED``] Low-Speed USB 2.0, 1.1, or 1.0 packets..
     USB_2_0_LOW_SPEED = 293
 
-    #: [``DLT_USB_2_0_FULL_SPEED``] Full-Speed USB 2.0, 1.1, or 1.0 packet,
-    #: beginning with a PID, as described by Chapter 8 "Protocol Layer" of the the
-    #: Universal Serial Bus Specification Revision 2.0.
+    #: [``DLT_USB_2_0_FULL_SPEED``] Full-Speed USB 2.0, 1.1, or 1.0 packets.
     USB_2_0_FULL_SPEED = 294
 
-    #: [``DLT_USB_2_0_HIGH_SPEED``] High-Speed USB 2.0 packet, beginning with a
-    #: PID, as described by Chapter 8 "Protocol Layer" of the the Universal Serial
-    #: Bus Specification Revision 2.0.
+    #: [``DLT_USB_2_0_HIGH_SPEED``] High-Speed USB 2.0 packets.
     USB_2_0_HIGH_SPEED = 295
 
-    #: [``DLT_AUERSWALD_LOG``] Auerswald Logger Protocol, as described in this
-    #: document.
+    #: [``DLT_AUERSWALD_LOG``] Auerswald Logger Protocol packets.
     AUERSWALD_LOG = 296
 
     #: [``DLT_ZWAVE_TAP``] Z-Wave packets, with a metadata header.
@@ -766,7 +717,7 @@ class LinkType(IntEnum):
     #: [``DLT_FIRA_UCI``] Ultra-wideband (UWB) controller interface protocol (UCI).
     FIRA_UCI = 299
 
-    #: [``DLT_MDB``] MDB (Multi-Drop Bus) vending machine protocol.
+    #: [``DLT_MDB``] MDB (Multi-Drop Bus) messages, with a pseudo-header.
     MDB = 300
 
     #: [``DLT_DECT_NR``] DECT-2020 New Radio (NR) MAC layer.

{pypcapkit-1.3.5.post13.dist-info → pypcapkit-1.3.5.post15.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: pypcapkit
-Version: 1.3.5.post13
+Version: 1.3.5.post15
 Summary: PyPCAPKit: comprehensive network packet analysis library
 Author-email: Jarry Shaw <jarryshaw@icloud.com>
 Maintainer: Jarry Shaw

{pypcapkit-1.3.5.post13.dist-info → pypcapkit-1.3.5.post15.dist-info}/RECORD

@@ -1,4 +1,4 @@
-pcapkit/__init__.py,sha256=jIhIVcv3ENZS4AcyNNTuuXBdI17hDNnXis0IFvA3eI0,4026
+pcapkit/__init__.py,sha256=MDb-rEQDcuD_cH45janDMUU9Ox7qUGxG7ab8pi4IeWY,4026
 pcapkit/__main__.py,sha256=G3rJrhCwkxlxOa04zwRJ4mq4G1k8JYWES3JnsaeMDe4,6415
 pcapkit/all.py,sha256=6G7rVFlajYk98F5vCYcLOw-CkXdEw4C2zAwnTgU0asU,6679
 pcapkit/py.typed,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
@@ -117,9 +117,9 @@ pcapkit/const/pcapng/record_type.py,sha256=4rZytbhhF6u5SPvQ8ew3jx4OhN_rwDQG3I4Jl
 pcapkit/const/pcapng/secrets_type.py,sha256=n_662aowLtqA25ilbdG6BWb2rYmrdBJt79_SISzfJkw,1578
 pcapkit/const/pcapng/verdict_type.py,sha256=_jEkN0g6CX-DGshAj-lUiZjiwdK7Fqou2pnzgZ-WyIk,1476
 pcapkit/const/reg/__init__.py,sha256=xKABPHwDQ0diN2sFA7hkw42FNsb6tx294XemEjTs2g8,1469
-pcapkit/const/reg/apptype.py,sha256=qjFIL38KV4QW7kPVRSwRXb5EQqZeIYlUtrFxNeF7_SA,1434105
+pcapkit/const/reg/apptype.py,sha256=OhjHqk7xP3-8CgjXxX9L97PTssMAHwsNHoggTliL4FA,1434077
 pcapkit/const/reg/ethertype.py,sha256=6Xz-MugXqQMc8hUHmkMMK_zeeYlkJ1Ql9Jtek_e3j1g,26564
-pcapkit/const/reg/linktype.py,sha256=MUwgprJkKYpBRdx9hn6Ziglr4Arw_2liKqmzu4TEdZw,26976
+pcapkit/const/reg/linktype.py,sha256=FPvSyVKT4s0zeyl9JGIVnNOr_0Pc8VPxZM4O2cZILqA,23128
 pcapkit/const/reg/transtype.py,sha256=quUphafWvhgSJYulKmhBtb3h4vqiE9qyHWPAt0tWPBs,13019
 pcapkit/const/tcp/__init__.py,sha256=PSTSxmdKt5l4NBsXq4m8x6dELWqOSNQxAuWePqTNAw8,1494
 pcapkit/const/tcp/checksum.py,sha256=0SSu5WD2_BcN6CYnIMI0AoToDBFTcVrxOYNzGinm7kE,1524
@@ -458,9 +458,9 @@ pcapkit/vendor/tcp/mp_tcp_option.py,sha256=f6_-VMoQFnhuEbxs17Q1rp6JjFSLXGK3w1K2v
 pcapkit/vendor/tcp/option.py,sha256=p05DrOt2m0QCf4gjLJzRshQRvaWxmt2PIzsv2UMjsa8,3043
 pcapkit/vendor/vlan/__init__.py,sha256=qvLktJ0yuoZokas6-_ZGwMJOzbujSCM8pZHQ9jjTegU,674
 pcapkit/vendor/vlan/priority_level.py,sha256=xVu6M-Ys4pft5I-qPCCxM-KfnMAUnZppD2qPO9gPkVE,2961
-pypcapkit-1.3.5.post13.dist-info/licenses/LICENSE,sha256=KkKND5E2e1Z6CQvSLPc1lRBy4xPRed41AG6q1txotWk,1516
-pypcapkit-1.3.5.post13.dist-info/METADATA,sha256=5Hj3LWybjTsfPmcv_CA9rymUxxrUPnzudBo2weSHPwY,7754
-pypcapkit-1.3.5.post13.dist-info/WHEEL,sha256=CmyFI0kx5cdEMTLiONQRbGQwjIoR1aIYB7eCAQ4KPJ0,91
-pypcapkit-1.3.5.post13.dist-info/entry_points.txt,sha256=8tVaZ-N0S2t19ELoTEGq_OlC8-dSmd7dvNn-kMV3afY,100
-pypcapkit-1.3.5.post13.dist-info/top_level.txt,sha256=KEssKRhG9ln3EOfGH-yi98HgI-MM9hOHy09QQP-fvk8,8
-pypcapkit-1.3.5.post13.dist-info/RECORD,,
+pypcapkit-1.3.5.post15.dist-info/licenses/LICENSE,sha256=KkKND5E2e1Z6CQvSLPc1lRBy4xPRed41AG6q1txotWk,1516
+pypcapkit-1.3.5.post15.dist-info/METADATA,sha256=ilQBWpwd2f9R6IVdsWaicWur5QqPwGIjeTU8Qpi9iF8,7754
+pypcapkit-1.3.5.post15.dist-info/WHEEL,sha256=CmyFI0kx5cdEMTLiONQRbGQwjIoR1aIYB7eCAQ4KPJ0,91
+pypcapkit-1.3.5.post15.dist-info/entry_points.txt,sha256=8tVaZ-N0S2t19ELoTEGq_OlC8-dSmd7dvNn-kMV3afY,100
+pypcapkit-1.3.5.post15.dist-info/top_level.txt,sha256=KEssKRhG9ln3EOfGH-yi98HgI-MM9hOHy09QQP-fvk8,8
+pypcapkit-1.3.5.post15.dist-info/RECORD,,