pylibsparseir 0.1.0__cp312-cp312-macosx_15_0_arm64.whl → 0.6.0__cp312-cp312-macosx_15_0_arm64.whl

pylibsparseir-0.6.0.dist-info/licenses/LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2024 SpM-lab
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

share/eigen3/cmake/Eigen3Config.cmake

@@ -0,0 +1,37 @@
+# This file exports the Eigen3::Eigen CMake target which should be passed to the
+# target_link_libraries command.
+
+
+####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
+####### Any changes to this file will be overwritten by the next CMake run ####
+####### The input file was Eigen3Config.cmake.in                            ########
+
+get_filename_component(PACKAGE_PREFIX_DIR "${CMAKE_CURRENT_LIST_DIR}/../../../" ABSOLUTE)
+
+macro(set_and_check _var _file)
+  set(${_var} "${_file}")
+  if(NOT EXISTS "${_file}")
+    message(FATAL_ERROR "File or directory ${_file} referenced by variable ${_var} does not exist !")
+  endif()
+endmacro()
+
+####################################################################################
+
+if (NOT TARGET eigen)
+  include ("${CMAKE_CURRENT_LIST_DIR}/Eigen3Targets.cmake")
+endif ()
+
+# Legacy variables, do *not* use. May be removed in the future.
+
+set (EIGEN3_FOUND 1)
+set (EIGEN3_USE_FILE    "${CMAKE_CURRENT_LIST_DIR}/UseEigen3.cmake")
+
+set (EIGEN3_DEFINITIONS  "")
+set (EIGEN3_INCLUDE_DIR  "${PACKAGE_PREFIX_DIR}/include/eigen3")
+set (EIGEN3_INCLUDE_DIRS "${PACKAGE_PREFIX_DIR}/include/eigen3")
+set (EIGEN3_ROOT_DIR     "${PACKAGE_PREFIX_DIR}")
+
+set (EIGEN3_VERSION_STRING "3.4.0")
+set (EIGEN3_VERSION_MAJOR  "3")
+set (EIGEN3_VERSION_MINOR  "4")
+set (EIGEN3_VERSION_PATCH  "0")

share/eigen3/cmake/Eigen3ConfigVersion.cmake

@@ -0,0 +1,65 @@
+# This is a basic version file for the Config-mode of find_package().
+# It is used by write_basic_package_version_file() as input file for configure_file()
+# to create a version-file which can be installed along a config.cmake file.
+#
+# The created file sets PACKAGE_VERSION_EXACT if the current version string and
+# the requested version string are exactly the same and it sets
+# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version,
+# but only if the requested major version is the same as the current one.
+# The variable CVF_VERSION must be set before calling configure_file().
+
+
+set(PACKAGE_VERSION "3.4.0")
+
+if(PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION)
+  set(PACKAGE_VERSION_COMPATIBLE FALSE)
+else()
+
+  if("3.4.0" MATCHES "^([0-9]+)\\.")
+    set(CVF_VERSION_MAJOR "${CMAKE_MATCH_1}")
+    if(NOT CVF_VERSION_MAJOR VERSION_EQUAL 0)
+      string(REGEX REPLACE "^0+" "" CVF_VERSION_MAJOR "${CVF_VERSION_MAJOR}")
+    endif()
+  else()
+    set(CVF_VERSION_MAJOR "3.4.0")
+  endif()
+
+  if(PACKAGE_FIND_VERSION_RANGE)
+    # both endpoints of the range must have the expected major version
+    math (EXPR CVF_VERSION_MAJOR_NEXT "${CVF_VERSION_MAJOR} + 1")
+    if (NOT PACKAGE_FIND_VERSION_MIN_MAJOR STREQUAL CVF_VERSION_MAJOR
+        OR ((PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "INCLUDE" AND NOT PACKAGE_FIND_VERSION_MAX_MAJOR STREQUAL CVF_VERSION_MAJOR)
+          OR (PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "EXCLUDE" AND NOT PACKAGE_FIND_VERSION_MAX VERSION_LESS_EQUAL CVF_VERSION_MAJOR_NEXT)))
+      set(PACKAGE_VERSION_COMPATIBLE FALSE)
+    elseif(PACKAGE_FIND_VERSION_MIN_MAJOR STREQUAL CVF_VERSION_MAJOR
+        AND ((PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "INCLUDE" AND PACKAGE_VERSION VERSION_LESS_EQUAL PACKAGE_FIND_VERSION_MAX)
+        OR (PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "EXCLUDE" AND PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION_MAX)))
+      set(PACKAGE_VERSION_COMPATIBLE TRUE)
+    else()
+      set(PACKAGE_VERSION_COMPATIBLE FALSE)
+    endif()
+  else()
+    if(PACKAGE_FIND_VERSION_MAJOR STREQUAL CVF_VERSION_MAJOR)
+      set(PACKAGE_VERSION_COMPATIBLE TRUE)
+    else()
+      set(PACKAGE_VERSION_COMPATIBLE FALSE)
+    endif()
+
+    if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION)
+      set(PACKAGE_VERSION_EXACT TRUE)
+    endif()
+  endif()
+endif()
+
+
+# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it:
+if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "" STREQUAL "")
+  return()
+endif()
+
+# check that the installed version has the same 32/64bit-ness as the one which is currently searching:
+if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "")
+  math(EXPR installedBits " * 8")
+  set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)")
+  set(PACKAGE_VERSION_UNSUITABLE TRUE)
+endif()

share/eigen3/cmake/Eigen3Targets.cmake

@@ -0,0 +1,106 @@
+# Generated by CMake
+
+if("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" LESS 2.8)
+   message(FATAL_ERROR "CMake >= 3.0.0 required")
+endif()
+if(CMAKE_VERSION VERSION_LESS "3.0.0")
+   message(FATAL_ERROR "CMake >= 3.0.0 required")
+endif()
+cmake_policy(PUSH)
+cmake_policy(VERSION 3.0.0...3.31)
+#----------------------------------------------------------------
+# Generated CMake target import file.
+#----------------------------------------------------------------
+
+# Commands may need to know the format version.
+set(CMAKE_IMPORT_FILE_VERSION 1)
+
+# Protect against multiple inclusion, which would fail when already imported targets are added once more.
+set(_cmake_targets_defined "")
+set(_cmake_targets_not_defined "")
+set(_cmake_expected_targets "")
+foreach(_cmake_expected_target IN ITEMS Eigen3::Eigen)
+  list(APPEND _cmake_expected_targets "${_cmake_expected_target}")
+  if(TARGET "${_cmake_expected_target}")
+    list(APPEND _cmake_targets_defined "${_cmake_expected_target}")
+  else()
+    list(APPEND _cmake_targets_not_defined "${_cmake_expected_target}")
+  endif()
+endforeach()
+unset(_cmake_expected_target)
+if(_cmake_targets_defined STREQUAL _cmake_expected_targets)
+  unset(_cmake_targets_defined)
+  unset(_cmake_targets_not_defined)
+  unset(_cmake_expected_targets)
+  unset(CMAKE_IMPORT_FILE_VERSION)
+  cmake_policy(POP)
+  return()
+endif()
+if(NOT _cmake_targets_defined STREQUAL "")
+  string(REPLACE ";" ", " _cmake_targets_defined_text "${_cmake_targets_defined}")
+  string(REPLACE ";" ", " _cmake_targets_not_defined_text "${_cmake_targets_not_defined}")
+  message(FATAL_ERROR "Some (but not all) targets in this export set were already defined.\nTargets Defined: ${_cmake_targets_defined_text}\nTargets not yet defined: ${_cmake_targets_not_defined_text}\n")
+endif()
+unset(_cmake_targets_defined)
+unset(_cmake_targets_not_defined)
+unset(_cmake_expected_targets)
+
+
+# Compute the installation prefix relative to this file.
+get_filename_component(_IMPORT_PREFIX "${CMAKE_CURRENT_LIST_FILE}" PATH)
+get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
+get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
+get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
+if(_IMPORT_PREFIX STREQUAL "/")
+  set(_IMPORT_PREFIX "")
+endif()
+
+# Create imported target Eigen3::Eigen
+add_library(Eigen3::Eigen INTERFACE IMPORTED)
+
+set_target_properties(Eigen3::Eigen PROPERTIES
+  INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include/eigen3"
+)
+
+# Load information for each installed configuration.
+file(GLOB _cmake_config_files "${CMAKE_CURRENT_LIST_DIR}/Eigen3Targets-*.cmake")
+foreach(_cmake_config_file IN LISTS _cmake_config_files)
+  include("${_cmake_config_file}")
+endforeach()
+unset(_cmake_config_file)
+unset(_cmake_config_files)
+
+# Cleanup temporary variables.
+set(_IMPORT_PREFIX)
+
+# Loop over all imported files and verify that they actually exist
+foreach(_cmake_target IN LISTS _cmake_import_check_targets)
+  if(CMAKE_VERSION VERSION_LESS "3.28"
+      OR NOT DEFINED _cmake_import_check_xcframework_for_${_cmake_target}
+      OR NOT IS_DIRECTORY "${_cmake_import_check_xcframework_for_${_cmake_target}}")
+    foreach(_cmake_file IN LISTS "_cmake_import_check_files_for_${_cmake_target}")
+      if(NOT EXISTS "${_cmake_file}")
+        message(FATAL_ERROR "The imported target \"${_cmake_target}\" references the file
+   \"${_cmake_file}\"
+but this file does not exist.  Possible reasons include:
+* The file was deleted, renamed, or moved to another location.
+* An install or uninstall procedure did not complete successfully.
+* The installation package was faulty and contained
+   \"${CMAKE_CURRENT_LIST_FILE}\"
+but not all the files it references.
+")
+      endif()
+    endforeach()
+  endif()
+  unset(_cmake_file)
+  unset("_cmake_import_check_files_for_${_cmake_target}")
+endforeach()
+unset(_cmake_target)
+unset(_cmake_import_check_targets)
+
+# This file does not depend on other imported targets which have
+# been exported from the same project but in a separate export set.
+
+# Commands beyond this point should not need to know the version.
+set(CMAKE_IMPORT_FILE_VERSION)
+cmake_policy(POP)

share/eigen3/cmake/UseEigen3.cmake

@@ -0,0 +1,6 @@
+#                                               -*- cmake -*-
+#
+#  UseEigen3.cmake
+
+add_definitions     ( ${EIGEN3_DEFINITIONS} )
+include_directories ( ${EIGEN3_INCLUDE_DIRS} )

share/pkgconfig/eigen3.pc

@@ -0,0 +1,9 @@
+prefix=/var/folders/q0/wmf37v850txck86cpnvwm_zw0000gn/T/tmp749q5tty/wheel/platlib
+exec_prefix=${prefix}
+
+Name: Eigen3
+Description: A C++ template library for linear algebra: vectors, matrices, and related algorithms
+Requires:
+Version: 3.4.0
+Libs:
+Cflags: -I${prefix}/include/eigen3

pylibsparseir-0.1.0.dist-info/METADATA

@@ -1,130 +0,0 @@
-Metadata-Version: 2.4
-Name: pylibsparseir
-Version: 0.1.0
-Summary: Python bindings for the libsparseir library, providing efficient sparse intermediate representation for many-body physics calculations
-Author: SpM-lab
-License-Expression: MIT
-Project-URL: Homepage, https://github.com/SpM-lab/libsparseir
-Project-URL: Repository, https://github.com/SpM-lab/libsparseir
-Project-URL: Bug Tracker, https://github.com/SpM-lab/libsparseir/issues
-Keywords: physics,many-body,green-functions,sparse-ir
-Classifier: Development Status :: 3 - Alpha
-Classifier: Intended Audience :: Science/Research
-Classifier: Programming Language :: Python :: 3
-Classifier: Programming Language :: Python :: 3.12
-Classifier: Topic :: Scientific/Engineering :: Physics
-Requires-Python: >=3.10
-Description-Content-Type: text/markdown
-Requires-Dist: numpy
-Requires-Dist: scipy
-
-# Python bindings for libsparseir
-
-This is a low-level binding for the [libsparseir](https://github.com/SpM-lab/libsparseir) library.
-
-## Requirements
-
-- Python >= 3.10
-- CMake (for building the C++ library)
-- C++11 compatible compiler
-- numpy
-
-### Optional Dependencies
-
-- **OpenBLAS** (recommended for better performance)
-  - macOS: `brew install openblas`
-  - Ubuntu/Debian: `sudo apt install libopenblas-dev`
-  - CentOS/RHEL: `sudo yum install openblas-devel`
-
-## Build
-
-### Install Dependencies and Build
-
-```bash
-uv sync
-```
-
-This will:
-- Install Python dependencies (numpy)
-- Build the C++ libsparseir library using CMake
-- Install the Python package in development mode
-
-### Build with OpenBLAS Support
-
-To enable OpenBLAS support for improved performance:
-
-```bash
-# Set environment variable to enable BLAS
-export SPARSEIR_USE_BLAS=1
-uv sync
-```
-
-Or for a single build:
-
-```bash
-SPARSEIR_USE_BLAS=1 uv sync
-```
-
-The build system will automatically detect OpenBLAS if it's installed in standard locations. If OpenBLAS is installed in a custom location, you may need to set additional environment variables:
-
-```bash
-export CMAKE_PREFIX_PATH="/path/to/openblas"
-export SPARSEIR_USE_BLAS=1
-uv sync
-```
-
-### Clean Build Artifacts
-
-To remove build artifacts and files copied from the parent directory:
-
-```bash
-uv run clean
-```
-
-This will remove:
-- Build directories: `build/`, `dist/`, `*.egg-info`
-- Copied source files: `include/`, `src/`, `fortran/`, `cmake/`, `CMakeLists.txt`
-- Compiled libraries: `pylibsparseir/*.so`, `pylibsparseir/*.dylib`, `pylibsparseir/*.dll`
-- Cache directories: `pylibsparseir/__pycache__`
-
-## Performance Notes
-
-### BLAS Support
-
-This package supports BLAS libraries for improved linear algebra performance:
-
-- **With OpenBLAS**: Significant performance improvements for matrix operations
-- **Without BLAS**: Uses Eigen's built-in implementations (still efficient, but slower for large matrices)
-
-The build system will automatically detect and use OpenBLAS if available. You can verify BLAS support by checking the build output for messages like:
-
-```
-BLAS support enabled
-Found OpenBLAS at: /opt/homebrew/opt/openblas
-```
-
-### Troubleshooting
-
-**Build fails with "Could NOT find BLAS":**
-```bash
-# Install OpenBLAS first
-brew install openblas  # macOS
-sudo apt install libopenblas-dev  # Ubuntu
-
-# Then force BLAS detection
-SPARSEIR_USE_BLAS=1 uv sync
-```
-
-**OpenBLAS not detected automatically:**
-```bash
-# Set CMake prefix path manually
-export CMAKE_PREFIX_PATH="/usr/local/opt/openblas"  # or your OpenBLAS path
-export SPARSEIR_USE_BLAS=1
-uv sync
-```
-
-**Verify BLAS support in built package:**
-```python
-import pylibsparseir
-# Check build logs or library dependencies to confirm BLAS linking
-```

pylibsparseir-0.1.0.dist-info/RECORD

@@ -1,12 +0,0 @@
-pylibsparseir-0.1.0.dist-info/RECORD,,
-pylibsparseir-0.1.0.dist-info/WHEEL,sha256=aJP9VHfFEgbnUsD-lsidbChggV8qvE5_IQddd2pzloY,136
-pylibsparseir-0.1.0.dist-info/entry_points.txt,sha256=0XwdYIQ1lPtI8228zUo7BpvdnwOzqct0cc6gp3r18pA,84
-pylibsparseir-0.1.0.dist-info/top_level.txt,sha256=eKNiduo4CIO59083m_BjY8uBZ9Fp1D3t8hkU4-k2waA,14
-pylibsparseir-0.1.0.dist-info/METADATA,sha256=CItKxoGfymHNuwhCTxzA66svXd_uU4dgBHU-r8JYcVA,3585
-pylibsparseir/ctypes_wrapper.py,sha256=G6_eraRUh9ON_2e_v4U_hc34HXirlotoawQDOkS0my0,798
-pylibsparseir/libsparseir.0.4.2.dylib,sha256=ywf7cvzVfAkmu9pTOPMwAMP6mlYtL4kcVqF_RognZn8,1431696
-pylibsparseir/clean_build_artifacts.py,sha256=Wbfe_zlZB5T04pXR8rvRAvsaLMYl6Y61p77W-eRKUME,2079
-pylibsparseir/constants.py,sha256=Ek3JnmgiDWy3LB8f_9QA7Gh0ReaEC-W2MlCBJG3cBYg,864
-pylibsparseir/core.py,sha256=37sGLY_Gbddf3x-kScoJtmyaLOeDOFaPbBCMPIMLOP0,23647
-pylibsparseir/libsparseir.dylib,sha256=ywf7cvzVfAkmu9pTOPMwAMP6mlYtL4kcVqF_RognZn8,1431696
-pylibsparseir/libsparseir.0.dylib,sha256=ywf7cvzVfAkmu9pTOPMwAMP6mlYtL4kcVqF_RognZn8,1431696

pylibsparseir-0.1.0.dist-info/entry_points.txt

@@ -1,2 +0,0 @@
-[console_scripts]
-clean = pylibsparseir.clean_build_artifacts:clean_build_artifacts

pylibsparseir-0.1.0.dist-info/top_level.txt

@@ -1 +0,0 @@
-pylibsparseir