pyedb 0.49.0__py3-none-any.whl → 0.50.1__py3-none-any.whl

pyedb/extensions/pre_layout_design_toolkit/via_design.py

@@ -1,1151 +0,0 @@
-import json
-from pathlib import Path
-
-import numpy as np
-import pandas as pd
-
-from pyedb import Edb
-from pyedb.generic.general_methods import generate_unique_name
-
-
-class Pair:
-    def __init__(self, name, net_names, **kwargs):
-        self.design_type = ""
-        self.name = name
-        self.net_names = net_names
-        self.core_pdef = kwargs.get("core_pdef", "blind_via")
-        self.has_stitching_vias = kwargs.get("has_stitching_vias", False)
-
-        self.bga_locations = []
-        self.vias = None
-        self.trace_out = []
-
-        self.fanout_port_location = []
-
-        self.p_via_loc = []  # [[via1 x, y], [via2 x, u]]
-        self.n_via_loc = []  # [[via1 x, y], [via2 x, u]]
-
-        self.via_to_via_traces = []
-
-        self.pkg_trace_out_lower_port_location = None
-        self.pkg_trace_out_upper_port_location = None
-        self.pcb_trace_out_lower_port_location = None
-        self.pcb_trace_out_upper_port_location = None
-
-    @property
-    def race_track_path_list(self):
-        temp = []
-        start_stop_layer = []
-        for v in self.vias:
-            start_stop_layer.append([v["padstack_definition"], v["start_layer"], v["stop_layer"]])
-        temp.append(list(zip(start_stop_layer, self.p_via_loc, self.n_via_loc)))
-        # ['blind_via', 'L2', 'L3', is_core_via], [x_loc, y_loc], [x_loc, y_loc]
-        return temp
-
-    @property
-    def core_via_start_layer(self):
-        start_layer = [i["start_layer"] for i in self.vias if i["padstack_definition"] == self.core_pdef][0]
-        return start_layer
-
-    @property
-    def core_via_stop_layer(self):
-        stop_layer = [i["stop_layer"] for i in self.vias if i["padstack_definition"] == self.core_pdef][0]
-        return stop_layer
-
-    @property
-    def bga_pin_location(self):
-        return [[f"{loc[1]}*pitch", f"{loc[0]}*pitch"] for loc in self.bga_locations]
-
-    @property
-    def fanout_via_location_outer(self):
-        return [self.p_via_loc[-1], self.n_via_loc[-1]]  # [[p_x, p_y], [n_x, n_y]]
-
-    @property
-    def fanout_via_location_inner(self):
-        return [self.p_via_loc[0], self.n_via_loc[0]]  # [[p_x, p_y], [n_x, n_y]]
-
-    @property
-    def pkg_trace_out_lower_params(self):
-        if len(self.trace_out) == 2:
-            temp = self.trace_out[1].copy()
-        else:
-            return
-
-        temp["name"] = self.name
-        temp["net_names"] = self.net_names
-        temp["fanout_via_location"] = self.fanout_via_location_inner
-        temp["base_via_loc"] = self.bga_locations
-        temp["port_location"] = self.pkg_trace_out_lower_port_location
-        return temp
-
-    @property
-    def pkg_trace_out_upper_params(self):
-        temp = self.trace_out[0].copy()
-        temp["name"] = self.name
-        temp["net_names"] = self.net_names
-        temp["fanout_via_location"] = self.fanout_via_location_outer
-        temp["base_via_loc"] = self.bga_locations
-        temp["port_location"] = self.pkg_trace_out_upper_port_location
-        return temp
-
-    @property
-    def pcb_trace_out_lower_params(self):
-        if len(self.trace_out) == 2:
-            temp = self.trace_out[1].copy()
-        else:
-            temp = self.trace_out[0].copy()
-
-        temp["name"] = self.name
-        temp["net_names"] = self.net_names
-        temp["fanout_via_location"] = self.fanout_via_location_outer
-        temp["base_via_loc"] = self.fanout_via_location_outer
-        temp["port_location"] = self.pcb_trace_out_lower_port_location
-        return temp
-
-    @property
-    def pcb_trace_out_upper_params(self):
-        if len(self.trace_out) == 2:
-            temp = self.trace_out[0].copy()
-        else:
-            return
-        temp["name"] = self.name
-        temp["net_names"] = self.net_names
-        temp["fanout_via_location"] = self.fanout_via_location_inner
-        temp["base_via_loc"] = self.fanout_via_location_inner
-        temp["port_location"] = self.pcb_trace_out_upper_port_location
-        return temp
-
-
-class GroundVia:
-    def __init__(self):
-        self.bga_locations = []
-        self.pattern_1_params = None  # {"distance": "0.2mm", "core_via_start_layer": "L6", "core_via_stop_layer": "L7"}
-
-
-class ViaDesignConfig:
-    @property
-    def plane_size(self):
-        y_size = len(self.pin_map["locations"])
-        x_size = len(self.pin_map["locations"][0]) - 1
-        return x_size, y_size
-
-    @property
-    def lower_left_point(self):
-        return ["-plane_extend", "-plane_extend-pitch"]
-
-    @property
-    def upper_right_point(self):
-        return [f"{self.plane_size[0]}*pitch+plane_extend", f"{self.plane_size[1]}*pitch+plane_extend"]
-
-    def __init__(self, config_file: Path, version=""):
-        self._version = version
-        self._design_name = ""
-        self._working_dir = ""
-        self.pkg_stackup = []
-        self.pcb_stackup = []
-
-        self._variables = []
-        self._padstack_instances = []
-        self._padstack_definition = []
-        self._traces = []
-        self._planes = []
-        self._voids = []
-        self._components = []
-        self._ports = []
-
-        if isinstance(config_file, str):
-            config_file = Path(config_file)
-        self.config_file_path = config_file
-
-        with open(config_file, "r") as f:
-            self.config = json.load(f)
-
-        with open(config_file.parent / self.config["materials"], "r") as f:
-            self.materials = json.load(f)
-
-        if self.design_type == "pkg":
-            with open(config_file.parent / self.config["pkg_stackup"], "r") as f:
-                self.pkg_stackup = json.load(f)
-
-        if self.include_pcb or self.design_type == "pcb":
-            with open(config_file.parent / self.config["pcb_stackup"], "r") as f:
-                self.pcb_stackup = json.load(f)
-
-        with open(config_file.parent / self.config["padstacks"], "r") as f:
-            self.padstacks = json.load(f)
-
-        with open(config_file.parent / self.config["pin_map"], "r") as f:
-            self.pin_map = json.load(f)
-
-        with open(config_file.parent / self.config["technology"], "r") as f:
-            self.technology = json.load(f)
-
-        with open(config_file.parent / self.config["setup"], "r") as f:
-            self.setup = json.load(f)
-
-        if self.include_pcb:
-            pdef_bga = [i for i in self.padstacks if i["name"] == "bga"][0]
-            pdef_bga["solder_ball_parameters"] = {
-                "shape": self.technology["bga_component"]["solder_ball_shape"],
-                "diameter": self.technology["bga_component"]["solder_ball_diameter"],
-                "mid_diameter": self.technology["bga_component"].get("solder_ball_mid_diameter"),
-                "placement": "above_padstack",
-                "material": "solder",
-            }
-
-        locations = pd.DataFrame(self.pin_map["locations"])
-
-        self.pcb_via_pairs = []
-        self.pkg_via_pairs = []
-
-        for name, nets in self.pin_map["signal_pairs"].items():
-            bga_locations = []
-            for net_name in nets:
-                bga_locations.append((locations == net_name).stack()[(locations == net_name).stack()].index.tolist()[0])
-
-            tech = self.technology["signal_pair"][name]
-            if self.design_type == "pkg":
-                sp = Pair(name, nets)
-                sp.design_type = "pkg"
-                sp.vias = tech["pkg_signal_via"]
-                sp.trace_out = tech["pkg_trace"]
-                sp.bga_locations = bga_locations
-                self.pkg_via_pairs.append(sp)
-
-            if self.include_pcb or self.design_type == "pcb":
-                sp = Pair(name, nets, core_pdef="pcb_via")
-                sp.design_type = "pcb"
-                sp.vias = tech["pcb_signal_via"]
-                sp.trace_out = tech["pcb_trace"]
-                sp.bga_locations = bga_locations
-                sp.has_stitching_vias = tech.get("has_stitching_vias", False)
-                self.pcb_via_pairs.append(sp)
-
-        if self.design_type == "pkg":
-            self.pkg_ground_vias = GroundVia()
-            for i in (locations == "GND").stack()[(locations == "GND").stack()].index.tolist():
-                self.pkg_ground_vias.bga_locations.append(i)
-                self.pkg_ground_vias.pattern_1_params = self.technology["pkg_ground_via"]
-
-        if self.design_type == "pcb" or self.include_pcb:
-            self.pcb_ground_vias = GroundVia()
-            for i in (locations == "GND").stack()[(locations == "GND").stack()].index.tolist():
-                self.pcb_ground_vias.bga_locations.append(i)
-                self.pcb_ground_vias.pattern_1_params = self.technology["pcb_ground_via"]
-
-    def create_ports_on_bga(self):
-        ports = []
-        for obj in self.pcb_via_pairs + self.pkg_via_pairs:
-            for idx, i in enumerate(obj.net_names):
-                port_name = f"{obj.name}_p_coax_port" if idx == 0 else f"{obj.name}_n_coax_port"
-                port = {
-                    "name": port_name,
-                    "reference_designator": "U1",
-                    "type": "coax",
-                    "positive_terminal": {"net": i},
-                }
-                ports.append(port)
-        return ports
-
-    @property
-    def signal_layers(self) -> list:
-        return [i["name"] for i in self.stackup if i["type"].lower() == "signal"]
-
-    @property
-    def signal_layers_pkg(self) -> list:
-        return [i["name"] for i in self.pkg_stackup if i["type"].lower() == "signal"]
-
-    @property
-    def signal_layers_pcb(self) -> list:
-        return [i["name"] for i in self.pcb_stackup if i["type"].lower() == "signal"]
-
-    @property
-    def pcb_signal_layer_list(self) -> list:
-        return [i["name"] for i in self.pcb_stackup if i["type"].lower() == "signal"]
-
-    @property
-    def stackup(self):
-        temp = []
-        for layer in self.pkg_stackup:
-            l2 = layer.copy()
-            temp.append(l2)
-
-        if self.pcb_stackup:
-            temp.append(
-                {
-                    "name": "PKG_PCB_AIR",
-                    "type": "dielectric",
-                    "material": "air",
-                    "thickness": self.technology["bga_component"]["solder_ball_height"],
-                }
-            )
-        for layer in self.pcb_stackup:
-            l2 = layer.copy()
-            temp.append(l2)
-        return temp
-
-    @property
-    def working_dir(self):
-        if not self._working_dir:
-            wdir = self.config.get("working_directory")
-            if wdir is not None:
-                self._working_dir = Path(wdir)
-            else:
-                working_dir = self.config_file_path.parent / "via_designs"
-                working_dir.mkdir(parents=True, exist_ok=True)
-                self._working_dir = working_dir
-        return self._working_dir
-
-    @property
-    def design_name(self):
-        if not self._design_name:
-            self._design_name = Path(generate_unique_name(self.config_file_path.stem))
-        return self._design_name
-
-    @property
-    def design_type(self):
-        return self.config["design_type"].lower()
-
-    @property
-    def include_pcb(self):
-        return self.config["include_pcb"] if self.design_type == "pkg" else None
-
-    @property
-    def version(self):
-        if self._version:
-            return self._version
-        else:
-            return self.config["version"]
-
-    def _create_variables(self):
-        self._variables.extend(
-            [
-                {"name": "plane_extend", "value": self.technology["plane_extend"], "description": "general"},
-                {"name": "pitch", "value": self.technology["pitch"], "description": "general"},
-            ]
-        )
-
-        if self.design_type == "pkg":
-            for name, _ in self.pin_map["signal_pairs"].items():
-                die_side_stitching_via_dy = self.technology["signal_pair"][name]["pkg_trace"][0]["stitching_via_dy"]
-                self._variables.extend(
-                    [
-                        {
-                            "name": f"{name}_die_side_stitching_via_dy",
-                            "value": die_side_stitching_via_dy,
-                            "description": "general",
-                        },
-                    ]
-                )
-        elif self.include_pcb or self.design_type == "pcb":
-            self._variables.extend(
-                [
-                    {"name": "pcb_stitching_via_distance", "value": "1mm", "description": "general"},
-                ]
-            )
-
-        else:
-            pass
-
-    def create_design(self):
-        self._create_variables()
-
-        new_vars, padstack_defs = self._create_padstack_defs()
-        self._variables.extend(new_vars)
-        self._padstack_definition.extend(padstack_defs)
-
-        if self.design_type == "pkg":
-            for df in self.pkg_via_pairs:
-                self._create_signal_via_transition(df, design_type="pkg")
-
-                self._create_return_via_pkg(df)
-
-                port_location = self._create_signal_fanout_type_1(df.pkg_trace_out_upper_params, design_type="pkg")
-                layer = df.pkg_trace_out_upper_params["layer"]
-                name = df.pkg_trace_out_upper_params["name"]
-                port = {
-                    "name": f"pkg_{name}_{layer}_wave_port",
-                    "type": "diff_wave_port",
-                    "positive_terminal": {"primitive_name": port_location[0][0], "point_on_edge": port_location[0][1]},
-                    "negative_terminal": {"primitive_name": port_location[1][0], "point_on_edge": port_location[1][1]},
-                    "horizontal_extent_factor": 6,
-                    "vertical_extent_factor": 4,
-                    "pec_launch_width": "0.02mm",
-                }
-                self._ports.append(port)
-
-                df.pkg_trace_out_upper_port_location = port_location
-
-                if df.pkg_trace_out_lower_params:
-                    port_location = self._create_signal_fanout_type_1(df.pkg_trace_out_lower_params, design_type="pkg")
-                    layer = df.pkg_trace_out_lower_params["layer"]
-                    name = df.pkg_trace_out_lower_params["name"]
-                    port = {
-                        "name": f"pkg_{name}_{layer}_wave_port",
-                        "type": "diff_wave_port",
-                        "positive_terminal": {
-                            "primitive_name": port_location[0][0],
-                            "point_on_edge": port_location[0][1],
-                        },
-                        "negative_terminal": {
-                            "primitive_name": port_location[1][0],
-                            "point_on_edge": port_location[1][1],
-                        },
-                        "horizontal_extent_factor": 6,
-                        "vertical_extent_factor": 4,
-                        "pec_launch_width": "0.02mm",
-                    }
-                    self._ports.append(port)
-
-                self._create_race_track(df, design_type="pkg")
-                # self._create_bga_component(placement_layer="PKG_BOT")
-            self._create_gnd_vias(design_type="pkg")
-
-        if self.include_pcb or self.design_type == "pcb":
-            for df in self.pcb_via_pairs:
-                self._create_signal_via_transition(df, design_type="pcb")
-                if df.has_stitching_vias:
-                    self._create_return_via_pcb(df)
-
-                port_location = self._create_signal_fanout_type_1(df.pcb_trace_out_lower_params, design_type="pcb")
-                layer = df.pcb_trace_out_lower_params["layer"]
-                name = df.pcb_trace_out_lower_params["name"]
-                port = {
-                    "name": f"pkg_{name}_{layer}_wave_port",
-                    "type": "diff_wave_port",
-                    "positive_terminal": {"primitive_name": port_location[0][0], "point_on_edge": port_location[0][1]},
-                    "negative_terminal": {"primitive_name": port_location[1][0], "point_on_edge": port_location[1][1]},
-                    "horizontal_extent_factor": 6,
-                    "vertical_extent_factor": 4,
-                    "pec_launch_width": "0.02mm",
-                }
-                self._ports.append(port)
-
-                if df.pcb_trace_out_upper_params:
-                    port_location = self._create_signal_fanout_type_1(df.pcb_trace_out_upper_params, design_type="pcb")
-                    layer = df.pcb_trace_out_upper_params["layer"]
-                    name = df.pcb_trace_out_upper_params["name"]
-                    port = {
-                        "name": f"pkg_{name}_{layer}_wave_port",
-                        "type": "diff_wave_port",
-                        "positive_terminal": {
-                            "primitive_name": port_location[0][0],
-                            "point_on_edge": port_location[0][1],
-                        },
-                        "negative_terminal": {
-                            "primitive_name": port_location[1][0],
-                            "point_on_edge": port_location[1][1],
-                        },
-                        "horizontal_extent_factor": 6,
-                        "vertical_extent_factor": 4,
-                        "pec_launch_width": "0.02mm",
-                    }
-                    self._ports.append(port)
-                # self._create_bga_component(placement_layer="PCB_TOP")
-                self._create_race_track(df, design_type="pcb")
-            self._create_gnd_vias(design_type="pcb")
-
-        bga_params = self.technology["bga_component"]
-        if self.design_type == "pcb":
-            if bga_params["enabled"] is True:
-                self._create_bga_component(bga_params, placement_layer="PCB_TOP")
-        elif self.design_type == "pkg":
-            if self.include_pcb:
-                self._create_solder_ball()
-            else:
-                if bga_params["enabled"] is True:
-                    self._create_bga_component(bga_params, placement_layer="PKG_BOT")
-
-        planes = self._create_planes()
-        self._planes.extend(planes)
-
-        if not self.include_pcb:
-            self._ports.extend(self.create_ports_on_bga())
-
-        data = {"general": {"suppress_pads": True, "anti_pads_always_on": True}}
-
-        stackup = {"materials": self.materials, "layers": self.stackup}
-        data["stackup"] = stackup
-        data["variables"] = self._variables
-        data["ports"] = self._ports
-        data["setups"] = [self.setup]
-
-        modeler = {
-            "padstack_definitions": self._padstack_definition,
-            "padstack_instances": self._padstack_instances,
-            "traces": self._traces,
-            "planes": self._planes,
-            "components": self._components,
-        }
-        data["modeler"] = modeler
-        return data
-
-    def _create_padstack_defs(self):
-        new_variables = []
-        cfg_padstacks = []
-        for pad in self.padstacks:
-            name = pad["name"]
-
-            hole_diameter = pad.get("hole_diameter")
-            if hole_diameter:
-                var_hole_diameter = f"${name}_hole_diameter"
-                new_variables.append({"name": var_hole_diameter, "value": hole_diameter, "description": "padstack"})
-                hole_parameters = {"shape": "circle", "diameter": var_hole_diameter}
-            else:
-                hole_parameters = None
-
-            pad_diameter = pad["pad_diameter"]
-            var_pad_diameter = f"${name}_pad_diameter"
-            new_variables.append({"name": var_pad_diameter, "value": pad_diameter, "description": "padstack"})
-            shape = pad["shape"]
-            if shape == "circle":
-                regular_pad = []
-                for layer in self.signal_layers:
-                    regular_pad.append(
-                        {
-                            "layer_name": layer,
-                            "shape": shape,
-                            "diameter": var_pad_diameter,
-                        }
-                    )
-            else:  # shape == "rectangle":
-                x_size = pad["x_size"]
-                y_size = pad["y_size"]
-                var_pad_x_size = f"${name}_pad_x_size"
-                var_pad_y_size = f"${name}_pad_y_size"
-                new_variables.append({"name": var_pad_x_size, "value": x_size, "description": "padstack"})
-                new_variables.append({"name": var_pad_y_size, "value": y_size, "description": "padstack"})
-
-                regular_pad = []
-                for layer in self.signal_layers:
-                    regular_pad.append(
-                        {
-                            "layer_name": layer,
-                            "shape": shape,
-                            "x_size": var_pad_x_size,
-                            "y_size": var_pad_y_size,
-                        }
-                    )
-
-            anti_pad_diameter = pad["anti_pad_diameter"]
-
-            # anti_pad = []
-            for layer in self.signal_layers:
-                if name in ["bga", "blind_via"]:
-                    var_anti_pad_diameter = f"${name}_anti_pad_diameter"
-                    new_variables.append(
-                        {"name": var_anti_pad_diameter, "value": anti_pad_diameter, "description": "layer={l}"}
-                    )
-                    break
-                else:
-                    var_anti_pad_diameter = f"${name}_anti_pad_diameter_{layer}"
-                    new_variables.append(
-                        {"name": var_anti_pad_diameter, "value": anti_pad_diameter, "description": f"layer={layer}"}
-                    )
-
-            pad_parameters = {
-                "regular_pad": regular_pad,
-                # "anti_pad": anti_pad
-            }
-
-            new_p_def = {"name": name, "pad_parameters": pad_parameters}
-            if hole_diameter:
-                new_p_def.update(
-                    {
-                        "hole_parameters": hole_parameters,
-                        "hole_range": pad["hole_range"],
-                    }
-                )
-
-            if pad.get("solder_ball_parameters"):
-                new_p_def["solder_ball_parameters"] = pad["solder_ball_parameters"]
-            cfg_padstacks.append(new_p_def)
-        return new_variables, cfg_padstacks
-
-    def _create_race_track(self, diff_pair: Pair, design_type):
-        voids = []
-        for i in diff_pair.race_track_path_list:
-            for j in i:
-                pdef, p1, p2 = j
-                pdef_name, start_layer, stop_layer = pdef
-                flag = False
-                for layer in self.signal_layers:
-                    if layer == start_layer:
-                        flag = True
-                    if layer in ["PCB_TOP", "PKG_BOT"]:
-                        if layer == stop_layer:
-                            flag = False
-                        continue
-                    if flag:
-                        width = (
-                            f"${pdef_name}_anti_pad_diameter"
-                            if pdef_name == "blind_via"
-                            else f"${pdef_name}_anti_pad_diameter_{layer}"
-                        )
-                        trace = {
-                            "path": [p1, p2],
-                            "width": width,
-                            "layer": layer,
-                            "name": f"{pdef_name}_{layer}_race_track",
-                            "net_name": "GND",
-                        }
-                        void = trace.copy()
-                        void["void_type"] = "trace"
-                        voids.append(void)
-
-                    if layer == stop_layer:
-                        flag = False
-
-        if design_type == "pkg":
-            for layer in self.signal_layers_pkg:
-                if layer in ["PCB_TOP", "PKG_BOT"]:
-                    continue
-                trace = {
-                    "path": diff_pair.bga_pin_location,
-                    "width": "$bga_anti_pad_diameter",
-                    "layer": layer,
-                    "name": f"bga_{layer}_race_track",
-                    "net_name": "GND",
-                    "void_type": "trace",
-                }
-                voids.append(trace)
-        self._voids.extend(voids)
-        # self._traces.extend(voids)
-        return voids
-
-    def _create_return_via_pkg(self, diff_pair: Pair):
-        pd_instances = []
-        for pin_idx, pin_loc in enumerate(diff_pair.bga_pin_location):
-            for idx, layer in enumerate(self.signal_layers_pkg):
-                if layer == self.signal_layers_pkg[-1]:
-                    break
-                pdef = "blind_via" if layer == diff_pair.core_via_start_layer else "micro_via"
-                if not pin_idx % 2:
-                    init_angle = "pi*5/8" if idx % 2 else "pi*1/2"
-                else:
-                    init_angle = "pi*13/8" if idx % 2 else "pi*3/2"
-                distance = f"$bga_anti_pad_diameter/2+${pdef}_hole_diameter/2"
-                via_list = np.arange(4) if idx % 2 else np.arange(5)
-                for i in via_list:
-                    angle = f"{init_angle}+{i}*1/4*pi"
-                    x_loc = f"{pin_loc[0]}+cos({angle})*({distance})"
-                    y_loc = f"{pin_loc[1]}+sin({angle})*({distance})"
-                    pd_instances.append(
-                        {
-                            # "name": f"{diff_pair.name}_p_return_",
-                            "definition": pdef,
-                            "layer_range": [layer, self.signal_layers_pkg[idx + 1]],
-                            "net_name": "GND",
-                            "position": [x_loc, y_loc],
-                            "is_pin": False,
-                        }
-                    )
-
-        for idx, loc in enumerate(diff_pair.fanout_via_location_outer):
-            x_loc = loc[0]
-            y_loc = f"{loc[1]}+{diff_pair.name}_die_side_stitching_via_dy/2"
-            pd_instances.append(
-                {
-                    # "name": f"{diff_pair.name}_p_return_",
-                    "definition": "micro_via",
-                    "layer_range": [
-                        diff_pair.pkg_trace_out_upper_params["layer"],
-                        self.signal_layers_pkg[
-                            self.signal_layers_pkg.index(diff_pair.pkg_trace_out_upper_params["layer"]) + 1
-                        ],
-                    ],
-                    "net_name": "GND",
-                    "position": [x_loc, y_loc],
-                    "is_pin": False,
-                }
-            )
-        self._padstack_instances.extend(pd_instances)
-        return pd_instances
-
-    def _create_return_via_pcb(self, diff_pair: Pair):
-        pd_instances = []
-        pdef = diff_pair.core_pdef
-        for pin_idx, pin_loc in enumerate(diff_pair.bga_pin_location):
-            if not pin_idx % 2:
-                init_angle = "pi*4/8"
-            else:
-                init_angle = "pi*3/2"
-            distance = "pcb_stitching_via_distance"
-            via_list = np.arange(4)
-            for i in via_list:
-                angle = f"{init_angle}+{i}*1/3*pi"
-                x_loc = f"{pin_loc[0]}+cos({angle})*({distance})"
-                y_loc = f"{pin_loc[1]}+sin({angle})*({distance})"
-                pd_instances.append(
-                    {
-                        # "name": f"{diff_pair.name}_p_return_",
-                        "definition": pdef,
-                        "layer_range": [diff_pair.core_via_start_layer, diff_pair.core_via_stop_layer],
-                        "net_name": "GND",
-                        "position": [x_loc, y_loc],
-                        "is_pin": False,
-                    }
-                )
-            self._padstack_instances.extend(pd_instances)
-
-    def _create_bga_component(self, params, placement_layer):
-        p_instances = []
-        bga_comp_pins = []
-        for row, row_obj in enumerate(self.pin_map["locations"]):
-            for col, obj in enumerate(row_obj):
-                if obj is None:
-                    continue
-                net_name = obj
-                x_loc = f"{col}*pitch"
-                y_loc = f"{row}*pitch"
-                name = f"via_{row}_{col}" if net_name == "GND" else net_name
-                name = f"{name}_bga"
-
-                temp = {
-                    "name": name,
-                    "definition": "bga",
-                    "net_name": net_name,
-                    "position": [x_loc, y_loc],
-                    "layer_range": [placement_layer, placement_layer],
-                    "is_pin": True,
-                }
-                p_instances.append(temp)
-                bga_comp_pins.append(name)
-
-        solder_ball_property = {
-            "shape": self.technology["bga_component"]["solder_ball_shape"],
-            "diameter": self.technology["bga_component"]["solder_ball_diameter"],
-            "mid_diameter": self.technology["bga_component"]["solder_ball_mid_diameter"],
-            "height": self.technology["bga_component"]["solder_ball_height"],
-        }
-        comp = {
-            "reference_designator": "U1",
-            "pins": bga_comp_pins,
-            "part_type": "io",
-            "definition": "BGA",
-            "placement_layer": placement_layer,
-            "solder_ball_properties": solder_ball_property,
-            "port_properties": {
-                "reference_offset": "0mm",
-                "reference_size_auto": True,
-                "reference_size_x": 0,
-                "reference_size_y": 0,
-            },
-        }
-        self._components.append(comp)
-        self._padstack_instances.extend(p_instances)
-        return comp, p_instances
-
-    def _create_solder_ball(self):
-        p_instances = []
-        bga_comp_pins = []
-        for row, row_obj in enumerate(self.pin_map["locations"]):
-            for col, obj in enumerate(row_obj):
-                if obj is None:
-                    continue
-                net_name = obj
-                x_loc = f"{col}*pitch"
-                y_loc = f"{row}*pitch"
-                name = f"via_{row}_{col}" if net_name == "GND" else net_name
-                pcb_name = f"{name}_bga"
-
-                temp_pcb_side = {
-                    "name": pcb_name,
-                    "definition": "bga",
-                    "net_name": net_name,
-                    "position": [x_loc, y_loc],
-                    "layer_range": ["PCB_TOP", "PCB_TOP"],
-                    "is_pin": True,
-                    "solder_ball_layer": "PKG_BOT",
-                }
-                p_instances.append(temp_pcb_side)
-                bga_comp_pins.append(pcb_name)
-
-                temp_pkg_side = temp_pcb_side.copy()
-                temp_pkg_side["name"] = f"{name}_pkg"
-                temp_pkg_side["layer_range"] = ["PKG_BOT", "PKG_BOT"]
-                temp_pkg_side.pop("solder_ball_layer")
-                p_instances.append(temp_pkg_side)
-
-        self._padstack_instances.extend(p_instances)
-        return p_instances
-
-    def _create_gnd_vias(self, design_type):
-        variables = []
-        traces = []
-        voids = []
-
-        ground_vias = self.pkg_ground_vias if design_type == "pkg" else self.pcb_ground_vias
-        distance = f"{design_type}_ground_via_distance"
-
-        if ground_vias.bga_locations:
-            variables.append(
-                {"name": distance, "value": ground_vias.pattern_1_params["distance"], "description": "ground_via"}
-            )
-        pd_insts = []
-
-        for location in ground_vias.bga_locations:
-            row, col = location
-            via_name = f"{design_type}_via_{row}_{col}"
-            if design_type == "pcb" and self.technology["bga_component"]["enabled"] is True:
-                dx = self.technology["bga_component"]["fanout_dx"]
-                dy = self.technology["bga_component"]["fanout_dy"]
-                x_loc_0 = f"{col}*pitch"
-                y_loc_0 = f"{row}*pitch"
-                x_loc = f"{x_loc_0}+{dx}"
-                y_loc = f"{y_loc_0}-{dy}"
-
-                trace_name = f"bga_fanout_trace_via_{row}_{col}"
-                trace_width = self.technology["bga_component"]["fanout_width"]
-                trace = {
-                    "path": [[x_loc_0, y_loc_0], [x_loc, y_loc]],
-                    "width": trace_width,
-                    "name": trace_name,
-                    "layer": "PCB_TOP",
-                    "net_name": "GND",
-                }
-                traces.append(trace)
-            else:
-                x_loc = f"{col}*pitch"
-                y_loc = f"{row}*pitch"
-
-            pd = {
-                "name": f"{design_type}_{via_name}_cvia_{row}_{col}",
-                "definition": "blind_via" if design_type == "pkg" else "pcb_via",
-                "layer_range": [
-                    ground_vias.pattern_1_params["core_via_start_layer"],
-                    ground_vias.pattern_1_params["core_via_stop_layer"],
-                ],
-                "net_name": "GND",
-                "position": [x_loc, y_loc],
-                "is_pin": False,
-            }
-            pd_insts.append(pd)
-
-            if design_type == "pkg":
-                flag = True
-                for idx, layer in enumerate(self.signal_layers_pkg):
-                    if layer == ground_vias.pattern_1_params["core_via_start_layer"]:
-                        flag = False
-                    elif layer == ground_vias.pattern_1_params["core_via_stop_layer"]:
-                        flag = True
-
-                    if idx < len(self.signal_layers_pkg) - 1:
-                        if flag:
-                            start_layer = layer
-                            end_layer = self.signal_layers_pkg[idx + 1]
-                        else:
-                            start_layer = ground_vias.pattern_1_params["core_via_start_layer"]
-                            end_layer = ground_vias.pattern_1_params["core_via_stop_layer"]
-                    else:
-                        break
-
-                    if flag:
-                        angle = 0
-                        for micro_via_idx, i in enumerate(["pi*1/2"] * 4):
-                            angle = f"{angle} + {i}"
-                            guvia_1_x_loc = f"{x_loc}+cos({angle})*{distance}"
-                            guvia_1_y_loc = f"{y_loc}+sin({angle})*{distance}"
-
-                            uvia_pd = {
-                                "name": f"{design_type}_{via_name}_uvia_{start_layer}_{end_layer}_{micro_via_idx}",
-                                "definition": "micro_via",
-                                "net_name": "GND",
-                                "position": [guvia_1_x_loc, guvia_1_y_loc],
-                                "layer_range": [start_layer, end_layer],
-                                "is_pin": False,
-                            }
-                            pd_insts.append(uvia_pd)
-
-        self._padstack_instances.extend(pd_insts)
-        self._variables.extend(variables)
-        self._traces.extend(traces)
-        self._voids.extend(voids)
-
-        return variables, traces, voids, pd_insts
-
-    def _create_signal_via_transition(self, diff_pair: Pair, design_type):  # pragma no cover
-        trace_layer_name = "stop_layer" if design_type == "pkg" else "start_layer"
-
-        fanout_polarity = "1" if design_type == "pkg" else "-1"
-        variables = []
-        pd_insts = []
-        traces = []
-        voids = []
-
-        local_traces = []
-        for net_idx, net_name in enumerate(diff_pair.net_names):
-            if design_type == "pkg":
-                pn_coef = 1 if net_idx == 0 else -1
-            else:
-                pn_coef = 1
-            x_loc = f"{diff_pair.bga_locations[net_idx][1]}*pitch"
-            y_loc = f"{diff_pair.bga_locations[net_idx][0]}*pitch"
-
-            path = [[x_loc, y_loc]]
-            for _, v in enumerate(diff_pair.vias):
-                trace_layer = v[trace_layer_name]
-                if v.get("trace", True):  # whether to create trace
-                    dx = f"{diff_pair.name}_via_{trace_layer}_dx"
-                    if net_idx == 1:
-                        variables.append({"name": dx, "value": v["dx"]})
-
-                    dy = f"{diff_pair.name}_via_{trace_layer}_dy"
-                    if net_idx == 1:
-                        variables.append({"name": dy, "value": v["dy"]})
-
-                    x_loc = f"{x_loc}+{dx}*({pn_coef})"
-                    y_loc = f"{y_loc}+{dy}*{fanout_polarity}"
-
-                    last_point = [x_loc, y_loc]
-                    path.append(last_point)
-                    trace = v.copy()
-                    trace["net_name"] = net_name
-                    trace["path"] = path
-                    trace["layer"] = trace_layer
-
-                    width = f"{diff_pair.name}_via_{trace_layer}_trace_width"
-                    if net_idx == 1:
-                        variables.append({"name": width, "value": v["trace_width"]})
-                    trace["width"] = width
-
-                    clearance = f"{diff_pair.name}_via_{trace_layer}_trace_clearance"
-                    if net_idx == 1:
-                        variables.append({"name": clearance, "value": f"{width}+2*{v['trace_clearance']}"})
-                    trace["void_width"] = clearance
-
-                    local_traces.append(trace)
-                    path = [last_point]
-
-                start_layer = v["start_layer"]
-                stop_layer = v["stop_layer"]
-
-                pdef = v["padstack_definition"]
-                if pdef == "micro_via":
-                    start_idx = self.signal_layers.index(start_layer)
-                    stop_idx = self.signal_layers.index(stop_layer)
-                    for i in np.arange(start_idx, stop_idx):
-                        temp_start = self.signal_layers[i]
-                        temp_stop = self.signal_layers[i + 1]
-                        temp = {
-                            "name": f"{net_name}_via_{start_layer}_{stop_layer}_{i}",
-                            "definition": pdef,
-                            "layer_range": [temp_start, temp_stop],
-                            "net_name": net_name,
-                            "position": [x_loc, y_loc],
-                            "is_pin": False,
-                        }
-                        pd_insts.append(temp)
-                else:
-                    temp = {
-                        "name": f"{net_name}_via_{start_layer}_{stop_layer}",
-                        "definition": pdef,
-                        "layer_range": [start_layer, stop_layer],
-                        "net_name": net_name,
-                        "position": [x_loc, y_loc],
-                        "is_pin": False,
-                    }
-
-                    back_drilling = v.get("backdrill_parameters")
-                    if back_drilling:
-                        temp["backdrill_parameters"] = back_drilling
-                    pd_insts.append(temp)
-
-                if True:  # v.get("race_track"):
-                    if net_idx % 2 == 0:
-                        diff_pair.p_via_loc.append([x_loc, y_loc])
-                    else:
-                        diff_pair.n_via_loc.append([x_loc, y_loc])
-
-        for idx, t in enumerate(local_traces):
-            net_name = t["net_name"]
-            path = t["path"]
-            diff_pair.via_to_via_traces.append(path)
-            trace = {
-                "path": path,
-                "width": t["width"],
-                "name": f"{net_name}_via_{idx}_trace",
-                "layer": t["layer"],
-                "net_name": net_name,
-            }
-            traces.append(trace)
-
-            if trace["layer"] not in ["PCB_TOP", "PKG_BOT"]:
-                void = trace.copy()
-                void["name"] = f"{net_name}_via_{idx}_clearance"
-                void["width"] = t["void_width"]
-                void["void_type"] = "trace"
-                voids.append(void)
-                # traces.append(void)
-
-        self._variables.extend(variables)
-        self._padstack_instances.extend(pd_insts)
-        self._traces.extend(traces)
-        self._voids.extend(voids)
-        return variables, pd_insts, traces, voids
-
-    def _create_planes(self):
-        planes = []
-
-        for layer in self.signal_layers:
-            if layer in ["PCB_TOP", "PKG_BOT"]:
-                continue
-            p = dict()
-            p["name"] = f"GND_{layer}"
-            p["layer"] = layer
-            p["net_name"] = "GND"
-            p["lower_left_point"] = self.lower_left_point
-            p["upper_right_point"] = self.upper_right_point
-            temp = []
-            for v in self._voids:
-                if v["layer"] == layer:
-                    temp.append(v["name"])
-                    if v["void_type"] == "trace":
-                        self._traces.append(v)
-                    elif v["void_type"] == "plane":
-                        self._planes.append(v)
-
-            p["voids"] = temp
-            planes.append(p)
-        return planes
-
-    def _create_signal_fanout_type_1(self, params, design_type):
-        trace_out_direction = 1 if params["trace_out_direction"] == "forward" else -1
-
-        variables = []
-        traces = []
-        voids = []
-        planes = []
-
-        die_side_port_location = []
-        trace_corner_location = []
-
-        width, gap, clearance, shift, length = 0, 0, 0, 0, 0
-        for idx, via_loc in enumerate(params["fanout_via_location"]):
-            pn_polarity = -1 if idx == 0 else 1
-
-            if idx == 0:
-                width = f"{design_type}_{params['name']}_{params['layer']}_trace_width"
-                variables.append({"name": width, "value": params["width"], "description": params["name"]})
-                gap = f"{design_type}_{params['name']}_{params['layer']}_trace_gap"
-                variables.append({"name": gap, "value": params["gap"], "description": params["name"]})
-                shift = f"{design_type}_{params['name']}_{params['layer']}_trace_corner_shift"
-                variables.append({"name": shift, "value": params["shift"], "description": params["name"]})
-                if design_type == "pkg":
-                    length = f"{design_type}_{params['name']}_{params['layer']}_trace_length"
-                    variables.append({"name": length, "value": params["length"], "description": params["name"]})
-
-            path = [via_loc]
-            if design_type == "pkg":
-                x_loc = f"{params['base_via_loc'][idx][1]}*pitch+{pn_polarity}*(-0.5*pitch+{gap}/2+{width}/2)"
-            elif design_type == "pcb":
-                x_loc = f"{params['base_via_loc'][idx][0]}+{pn_polarity}*(-0.5*pitch+{gap}/2+{width}/2)"
-
-            y_loc = f"{via_loc[1]}+{shift}*{trace_out_direction}"
-
-            path.append([x_loc, y_loc])
-            trace_corner_location.append([x_loc, y_loc])
-
-            if design_type == "pkg":
-                y_loc = f"{y_loc}+{length}*{trace_out_direction}"
-            elif trace_out_direction == 1:
-                y_loc = self.upper_right_point[1]
-            else:
-                y_loc = "-plane_extend-pitch"
-            path.append([x_loc, y_loc])
-
-            trace_name = f"{design_type}_{params['name']}_{params['layer']}_trace_{params['net_names'][idx]}"
-            trace = {
-                "path": path,
-                "width": width,
-                "name": trace_name,
-                "layer": params["layer"],
-                "net_name": params["net_names"][idx],
-                "start_cap_style": "flat",
-                "end_cap_style": "flat",
-                "corner_style": "sharp",
-            }
-            if design_type == "pkg":
-                trace["path"] = path[1:]
-            traces.append(trace)
-
-            if idx == 0:
-                clearance = f"{design_type}_{params['name']}_{params['layer']}_trace_clearance"
-                variables.append({"name": clearance, "value": params["clearance"], "description": params["name"]})
-            void = trace.copy()
-            void["path"] = path
-            void["width"] = f"{width}+2*{clearance}"
-            void["name"] = trace_name + "_clearance"
-            void["end_cap_style"] = "extended"
-            void["void_type"] = "trace"
-
-            voids.append(void)
-            # traces.append(void)
-
-            if design_type == "pkg":
-                # create teardrop
-                # td_angle1 = f"atan({shift}/(pitch/2-{gap}/2-{width}/2))"
-                trace_p0_x, trace_p0_y = path[0]
-                trace_p1_x, trace_p1_y = path[1]
-                trace_dx = f"abs({trace_p1_x}-({trace_p0_x}))"
-                trace_dy = f"abs({trace_p1_y}-({trace_p0_y}))"
-
-                td_angle2 = f"atan({trace_dx}/{trace_dy})"
-
-                td_dx = f"$micro_via_pad_diameter/2*cos({td_angle2})"
-                td_dy = f"$micro_via_pad_diameter/2*sin({td_angle2})"
-
-                p0 = [f"{trace_p1_x}- {width}/2*{pn_polarity}", trace_p1_y]
-                p1 = [f"{trace_p1_x}+ {width}/2*{pn_polarity}", trace_p1_y]
-                p2 = [f"{td_dx}*{pn_polarity}", f"{td_dy}*{trace_out_direction}"]
-                p3 = [f"{td_dx}*{pn_polarity}*-1", f"{td_dy}*-1*{trace_out_direction}"]
-
-                pts2 = [p0, p1]
-                for i in [p2, p3]:
-                    pts2.append([f"{i[0]}+{via_loc[0]}", f"{i[1]}+{via_loc[1]}"])
-
-                poly = {
-                    "type": "polygon",
-                    "name": f"{design_type}_{params['name']}_{params['layer']}_teardrop_{params['net_names'][idx]}",
-                    "layer": params["layer"],
-                    "net_name": params["net_names"][idx],
-                    "points": pts2,
-                }
-                planes.append(poly)
-
-            last_point = path[-1]
-            die_side_port_location.append([trace_name, last_point])
-
-        # create void
-        v_loc = params["fanout_via_location"].copy()
-        v_loc.reverse()
-        pts = trace_corner_location + v_loc
-
-        void = {
-            "type": "polygon",
-            "name": f"{design_type}_{params['name']}_{params['layer']}_trapezoid_void",
-            "layer": params["layer"],
-            "net_name": "GND",
-            "points": pts,
-            "void_type": "plane",
-        }
-        voids.append(void)
-        # planes.append(void)
-        self._variables.extend(variables)
-        self._traces.extend(traces)
-        self._voids.extend(voids)
-        self._planes.extend(planes)
-        return die_side_port_location
-
-    def create_edb(self, data) -> str:
-        edb_path = str(self.working_dir / self.design_name.with_suffix(".aedb"))
-        print(edb_path)
-        edbapp = Edb(edbpath=edb_path, edbversion=self.version)
-        edbapp.configuration.load(data, apply_file=True)
-        edbapp.save()
-        edbapp.close()
-        return edb_path
-
-    def save_cfg_to_file(self, data):
-        with open(self.working_dir / self.design_name.with_suffix(".json"), "w") as f:
-            json.dump(data, f, indent=4)