pyedb 0.37.0__py3-none-any.whl → 0.38.0__py3-none-any.whl

pyedb/configuration/cfg_padstacks.py

@@ -19,6 +19,7 @@
 # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 # SOFTWARE.
+import os
 
 from pyedb.configuration.cfg_common import CfgBase
 from pyedb.dotnet.edb_core.general import (
@@ -32,20 +33,20 @@ class CfgPadstacks:
     """Padstack data class."""
 
     def __init__(self, pedb, padstack_dict=None):
-        self._pedb = pedb
+        self.pedb = pedb
         self.definitions = []
         self.instances = []
 
         if padstack_dict:
-            padstack_defs_layout = self._pedb.padstacks.definitions
+            padstack_defs_layout = self.pedb.padstacks.definitions
             for pdef in padstack_dict.get("definitions", []):
                 obj = padstack_defs_layout[pdef["name"]]
-                self.definitions.append(CfgPadstackDefinition(self._pedb, obj, **pdef))
+                self.definitions.append(CfgPadstackDefinition(self.pedb, obj, **pdef))
 
-            inst_from_layout = self._pedb.padstacks.instances_by_name
+            inst_from_layout = self.pedb.padstacks.instances_by_name
             for inst in padstack_dict.get("instances", []):
                 obj = inst_from_layout[inst["name"]]
-                self.instances.append(CfgPadstackInstance(self._pedb, obj, **inst))
+                self.instances.append(CfgPadstackInstance(self.pedb, obj, **inst))
 
     def clean(self):
         self.definitions = []
@@ -55,43 +56,298 @@ class CfgPadstacks:
         """Apply padstack definition and instances on layout."""
         if self.definitions:
             for pdef in self.definitions:
-                pdef.set_parameters_to_edb()
+                pdef.api.set_parameters_to_edb()
         if self.instances:
             for inst in self.instances:
-                inst.set_parameters_to_edb()
+                inst.api.set_parameters_to_edb()
 
     def retrieve_parameters_from_edb(self):
         self.clean()
-        for name, obj in self._pedb.padstacks.definitions.items():
+        for name, obj in self.pedb.padstacks.definitions.items():
             if name.lower() == "symbol":
                 continue
-            pdef = CfgPadstackDefinition(self._pedb, obj)
-            pdef.retrieve_parameters_from_edb()
+            pdef = CfgPadstackDefinition(self.pedb, obj)
+            pdef.api.retrieve_parameters_from_edb()
             self.definitions.append(pdef)
 
-        for obj in self._pedb.layout.padstack_instances:
-            inst = CfgPadstackInstance(self._pedb, obj)
-            inst.retrieve_parameters_from_edb()
+        for obj in self.pedb.layout.padstack_instances:
+            inst = CfgPadstackInstance(self.pedb, obj)
+            inst.api.retrieve_parameters_from_edb()
             self.instances.append(inst)
 
 
 class CfgPadstackDefinition(CfgBase):
     """Padstack definition data class."""
 
-    PAD_SHAPE_PARAMETERS = {
-        "circle": ["diameter"],
-        "square": ["size"],
-        "rectangle": ["x_size", "y_size"],
-        "oval": ["x_size", "y_size", "corner_radius"],
-        "bullet": ["x_size", "y_size", "corner_radius"],
-        "round45": ["inner", "channel_width", "isolation_gap"],
-        "round90": ["inner", "channel_width", "isolation_gap"],
-        "no_geometry": [],
-    }
+    class Common:
+        PAD_SHAPE_PARAMETERS = {
+            "circle": ["diameter"],
+            "square": ["size"],
+            "rectangle": ["x_size", "y_size"],
+            "oval": ["x_size", "y_size", "corner_radius"],
+            "bullet": ["x_size", "y_size", "corner_radius"],
+            "round45": ["inner", "channel_width", "isolation_gap"],
+            "round90": ["inner", "channel_width", "isolation_gap"],
+            "no_geometry": [],
+        }
+
+        @property
+        def pyedb_obj(self):
+            return self.parent.pyedb_obj
+
+        def __init__(self, parent):
+            self.parent = parent
+            self.pedb = parent.pedb
+
+            definition = self.pedb._edb.Definition
+            self._solder_shape_type = {
+                "no_solder_ball": definition.SolderballShape.NoSolderball,
+                "cylinder": definition.SolderballShape.Cylinder,
+                "spheroid": definition.SolderballShape.Spheroid,
+            }
+            self._solder_placement = {
+                "above_padstack": definition.SolderballPlacement.AbovePadstack,
+                "below_padstack": definition.SolderballPlacement.BelowPadstack,
+            }
+
+        def set_parameters_to_edb(self):
+            if self.parent.hole_parameters:
+                self._set_hole_parameters_to_edb(self.parent.hole_parameters)
+            if self.parent.hole_range:
+                self.pyedb_obj.hole_range = self.parent.hole_range
+            if self.parent.hole_plating_thickness:
+                self.pyedb_obj.hole_plating_thickness = self.parent.hole_plating_thickness
+            if self.parent.material:
+                self.pyedb_obj.material = self.parent.material
+            if self.parent.pad_parameters:
+                self._set_pad_parameters_to_edb(self.parent.pad_parameters)
+            if self.parent.solder_ball_parameters:
+                self._set_solder_parameters_to_edb(self.parent.solder_ball_parameters)
+
+        def retrieve_parameters_from_edb(self):
+            self.parent.name = self.pyedb_obj.name
+            self.parent.hole_plating_thickness = self.pyedb_obj.hole_plating_thickness
+            self.parent.material = self.pyedb_obj.material
+            self.parent.hole_range = self.pyedb_obj.hole_range
+            self.parent.pad_parameters = self._get_pad_parameters_from_edb()
+            self.parent.hole_parameters = self._get_hole_parameters_from_edb()
+            self.parent.solder_ball_parameters = self._get_solder_parameters_from_edb()
+
+        def _set_solder_parameters_to_edb(self, parameters):
+            pdef_data = self.pyedb_obj._padstack_def_data
+
+            shape = parameters.get("shape", "no_solder_ball")
+            diameter = parameters.get("diameter", "0.4mm")
+            mid_diameter = parameters.get("mid_diameter", diameter)
+            placement = parameters.get("placement", "above_padstack")
+            material = parameters.get("material", None)
+
+            pdef_data.SetSolderBallShape(self._solder_shape_type[shape])
+            if not shape == "no_solder_ball":
+                pdef_data.SetSolderBallParameter(self.pedb.edb_value(diameter), self.pedb.edb_value(mid_diameter))
+                pdef_data.SetSolderBallPlacement(self._solder_placement[placement])
+
+            if material:
+                pdef_data.SetSolderBallMaterial(material)
+            self.pyedb_obj._padstack_def_data = pdef_data
+
+        def _get_solder_parameters_from_edb(self):
+            pdef_data = self.parent.pyedb_obj._padstack_def_data
+            shape = pdef_data.GetSolderBallShape()
+            _, diameter, mid_diameter = pdef_data.GetSolderBallParameterValue()
+            placement = pdef_data.GetSolderBallPlacement()
+            material = pdef_data.GetSolderBallMaterial()
+
+            parameters = {
+                "shape": [i for i, j in self._solder_shape_type.items() if j == shape][0],
+                "diameter": self.pedb.edb_value(diameter).ToString(),
+                "mid_diameter": self.pedb.edb_value(mid_diameter).ToString(),
+                "placement": [i for i, j in self._solder_placement.items() if j == placement][0],
+                "material": material,
+            }
+            return parameters
+
+        def _get_pad_parameters_from_edb(self):
+            """Pad parameters.
+
+            Returns
+            -------
+            dict
+                params = {
+                'regular_pad': [
+                    {'layer_name': '1_Top', 'shape': 'circle', 'offset_x': '0.1mm', 'offset_y': '0', 'rotation': '0',
+                     'diameter': '0.5mm'}
+                ],
+                'anti_pad': [
+                    {'layer_name': '1_Top', 'shape': 'circle', 'offset_x': '0', 'offset_y': '0', 'rotation': '0',
+                    'diameter': '1mm'}
+                ],
+                'thermal_pad': [
+                    {'layer_name': '1_Top', 'shape': 'round90', 'offset_x': '0', 'offset_y': '0', 'rotation': '0',
+                    'inner': '1mm', 'channel_width': '0.2mm', 'isolation_gap': '0.3mm'},
+                ],
+                'hole': [
+                    {'layer_name': '1_Top', 'shape': 'circle', 'offset_x': '0', 'offset_y': '0', 'rotation': '0',
+                     'diameter': '0.1499997mm'},
+                ]
+            }
+            """
+            pdef_data = self.pyedb_obj._padstack_def_data
+            pad_type_list = [
+                self.pedb._edb.Definition.PadType.RegularPad,
+                self.pedb._edb.Definition.PadType.AntiPad,
+                self.pedb._edb.Definition.PadType.ThermalPad,
+                # self._ppadstack._pedb._edb.Definition.PadType.Hole,
+                # This property doesn't appear in UI. It is unclear what it is used for.
+                # Suppressing this property for now.
+            ]
+            data = {}
+            for pad_type in pad_type_list:
+                pad_type_name = pascal_to_snake(pad_type.ToString())
+                temp_list = []
+                for lyr_name in list(pdef_data.GetLayerNames()):
+                    result = pdef_data.GetPadParametersValue(lyr_name, pad_type)
+                    _, pad_shape, params, offset_x, offset_y, rotation = result
+                    pad_shape = pascal_to_snake(pad_shape.ToString())
+
+                    pad_params = {}
+                    pad_params["layer_name"] = lyr_name
+                    pad_params["shape"] = pad_shape
+                    pad_params["offset_x"] = offset_x.ToString()
+                    pad_params["offset_y"] = offset_y.ToString()
+                    pad_params["rotation"] = rotation.ToString()
+
+                    for idx, i in enumerate(self.PAD_SHAPE_PARAMETERS[pad_shape]):
+                        pad_params[i] = params[idx].ToString()
+                    temp_list.append(pad_params)
+                data[pad_type_name] = temp_list
+            return data
+
+        def _set_pad_parameters_to_edb(self, param):
+            pdef_data = self.pyedb_obj._padstack_def_data
+
+            pad_type_list = [
+                self.pedb._edb.Definition.PadType.RegularPad,
+                self.pedb._edb.Definition.PadType.AntiPad,
+                self.pedb._edb.Definition.PadType.ThermalPad,
+                self.pedb._edb.Definition.PadType.Hole,
+            ]
+            for pad_type in pad_type_list:
+                pad_type_name = pascal_to_snake(pad_type.ToString())
+                rpp = param.get(pad_type_name, [])
+                for idx, layer_data in enumerate(rpp):
+                    # Get geometry type from kwargs
+                    p = layer_data.get("shape")
+                    temp_param = []
+
+                    # Handle Circle geometry type
+                    if p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Circle.ToString()):
+                        temp_param.append(layer_data["diameter"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Circle
+
+                    # Handle Square geometry type
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Square.ToString()):
+                        temp_param.append(layer_data["size"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Square
+
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Rectangle.ToString()):
+                        temp_param.append(layer_data["x_size"])
+                        temp_param.append(layer_data["y_size"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Rectangle
+
+                    # Handle Oval geometry type
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Oval.ToString()):
+                        temp_param.append(layer_data["x_size"])
+                        temp_param.append(layer_data["y_size"])
+                        temp_param.append(layer_data["corner_radius"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Oval
+
+                    # Handle Bullet geometry type
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Bullet.ToString()):
+                        temp_param.append(layer_data["x_size"])
+                        temp_param.append(layer_data["y_size"])
+                        temp_param.append(layer_data["corner_radius"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Bullet
+
+                    # Handle Round45 geometry type
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Round45.ToString()):
+                        temp_param.append(layer_data["inner"])
+                        temp_param.append(layer_data["channel_width"])
+                        temp_param.append(layer_data["isolation_gap"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Round45
+
+                    # Handle Round90 geometry type
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.Round90.ToString()):
+                        temp_param.append(layer_data["inner"])
+                        temp_param.append(layer_data["channel_width"])
+                        temp_param.append(layer_data["isolation_gap"])
+                        pad_shape = self.pedb._edb.Definition.PadGeometryType.Round90
+                    elif p == pascal_to_snake(self.pedb._edb.Definition.PadGeometryType.NoGeometry.ToString()):
+                        continue
+
+                    # Set pad parameters for the current layer
+                    pdef_data.SetPadParameters(
+                        layer_data["layer_name"],
+                        pad_type,
+                        pad_shape,
+                        convert_py_list_to_net_list([self.pedb.edb_value(i) for i in temp_param]),
+                        self.pedb.edb_value(layer_data.get("offset_x", 0)),
+                        self.pedb.edb_value(layer_data.get("offset_y", 0)),
+                        self.pedb.edb_value(layer_data.get("rotation", 0)),
+                    )
+            self.pyedb_obj._padstack_def_data = pdef_data
+
+        def _get_hole_parameters_from_edb(self):
+            pdef_data = self.pyedb_obj._padstack_def_data
+            _, hole_shape, params, offset_x, offset_y, rotation = pdef_data.GetHoleParametersValue()
+            hole_shape = pascal_to_snake(hole_shape.ToString())
+
+            hole_params = {}
+            hole_params["shape"] = hole_shape
+            for idx, i in enumerate(self.PAD_SHAPE_PARAMETERS[hole_shape]):
+                hole_params[i] = params[idx].ToString()
+            hole_params["offset_x"] = offset_x.ToString()
+            hole_params["offset_y"] = offset_y.ToString()
+            hole_params["rotation"] = rotation.ToString()
+            return hole_params
+
+        def _set_hole_parameters_to_edb(self, params):
+            original_params = self.parent.hole_parameters
+            pdef_data = self.pyedb_obj._padstack_def_data
+
+            temp_param = []
+            shape = params["shape"]
+            if shape == "no_geometry":
+                return  # .net api doesn't tell how to set no_geometry shape.
+            for idx, i in enumerate(self.PAD_SHAPE_PARAMETERS[shape]):
+                temp_param.append(params[i])
+                pedb_shape = getattr(self.pedb._edb.Definition.PadGeometryType, snake_to_pascal(shape))
+
+            pdef_data.SetHoleParameters(
+                pedb_shape,
+                convert_py_list_to_net_list([self.pedb.edb_value(i) for i in temp_param]),
+                self.pedb.edb_value(params.get("offset_x", original_params.get("offset_x", 0))),
+                self.pedb.edb_value(params.get("offset_y", original_params.get("offset_y", 0))),
+                self.pedb.edb_value(params.get("rotation", original_params.get("rotation", 0))),
+            )
+            self.pyedb_obj._padstack_def_data = pdef_data
+
+    class Grpc(Common):
+        def __init__(self, parent):
+            super().__init__(parent)
+
+    class DotNet(Grpc):
+        def __init__(self, parent):
+            super().__init__(parent)
 
     def __init__(self, pedb, pedb_object, **kwargs):
-        self._pedb = pedb
-        self._pyedb_obj = pedb_object
+        self.pedb = pedb
+        self.pyedb_obj = pedb_object
+        if os.environ["PYEDB_USE_DOTNET"] == "0":
+            self.api = self.Grpc(self)
+        else:
+            self.api = self.DotNet(self)
+
         self.name = kwargs.get("name", None)
         self.hole_plating_thickness = kwargs.get("hole_plating_thickness", None)
         self.material = kwargs.get("hole_material", None)
@@ -100,244 +356,76 @@ class CfgPadstackDefinition(CfgBase):
         self.hole_parameters = kwargs.get("hole_parameters", None)
         self.solder_ball_parameters = kwargs.get("solder_ball_parameters", None)
 
-        self._solder_shape_type = {
-            "no_solder_ball": self._pedb._edb.Definition.SolderballShape.NoSolderball,
-            "cylinder": self._pedb._edb.Definition.SolderballShape.Cylinder,
-            "spheroid": self._pedb._edb.Definition.SolderballShape.Spheroid,
-        }
-        self._solder_placement = {
-            "above_padstack": self._pedb._edb.Definition.SolderballPlacement.AbovePadstack,
-            "below_padstack": self._pedb._edb.Definition.SolderballPlacement.BelowPadstack,
-        }
 
-    def set_parameters_to_edb(self):
-        if self.hole_parameters:
-            self._set_hole_parameters_to_edb(self.hole_parameters)
-        if self.hole_range:
-            self._pyedb_obj.hole_range = self.hole_range
-        if self.hole_plating_thickness:
-            self._pyedb_obj.hole_plating_thickness = self.hole_plating_thickness
-        if self.material:
-            self._pyedb_obj.material = self.material
-        if self.pad_parameters:
-            self._set_pad_parameters_to_edb(self.pad_parameters)
-        if self.solder_ball_parameters:
-            self._set_solder_parameters_to_edb(self.solder_ball_parameters)
+class CfgPadstackInstance(CfgBase):
+    """Instance data class."""
 
-    def retrieve_parameters_from_edb(self):
-        self.name = self._pyedb_obj.name
-        self.hole_plating_thickness = self._pyedb_obj.hole_plating_thickness
-        self.material = self._pyedb_obj.material
-        self.hole_range = self._pyedb_obj.hole_range
-        self.pad_parameters = self._get_pad_parameters_from_edb()
-        self.hole_parameters = self._get_hole_parameters_from_edb()
-        self.solder_ball_parameters = self._get_solder_parameters_from_edb()
-
-    def _set_solder_parameters_to_edb(self, parameters):
-        pdef_data = self._pyedb_obj._padstack_def_data
-
-        shape = parameters.get("shape", "no_solder_ball")
-        diameter = parameters.get("diameter", "0.4mm")
-        mid_diameter = parameters.get("mid_diameter", diameter)
-        placement = parameters.get("placement", "above_padstack")
-        material = parameters.get("material", None)
-
-        pdef_data.SetSolderBallShape(self._solder_shape_type[shape])
-        if not shape == "no_solder_ball":
-            pdef_data.SetSolderBallParameter(self._pedb.edb_value(diameter), self._pedb.edb_value(mid_diameter))
-            pdef_data.SetSolderBallPlacement(self._solder_placement[placement])
-
-        if material:
-            pdef_data.SetSolderBallMaterial(material)
-        self._pyedb_obj._padstack_def_data = pdef_data
-
-    def _get_solder_parameters_from_edb(self):
-        pdef_data = self._pyedb_obj._padstack_def_data
-        shape = pdef_data.GetSolderBallShape()
-        _, diameter, mid_diameter = pdef_data.GetSolderBallParameterValue()
-        placement = pdef_data.GetSolderBallPlacement()
-        material = pdef_data.GetSolderBallMaterial()
-
-        parameters = {
-            "shape": [i for i, j in self._solder_shape_type.items() if j == shape][0],
-            "diameter": self._pedb.edb_value(diameter).ToString(),
-            "mid_diameter": self._pedb.edb_value(mid_diameter).ToString(),
-            "placement": [i for i, j in self._solder_placement.items() if j == placement][0],
-            "material": material,
-        }
-        return parameters
-
-    def _get_pad_parameters_from_edb(self):
-        """Pad parameters.
-
-        Returns
-        -------
-        dict
-            params = {
-            'regular_pad': [
-                {'layer_name': '1_Top', 'shape': 'circle', 'offset_x': '0.1mm', 'offset_y': '0', 'rotation': '0',
-                 'diameter': '0.5mm'}
-            ],
-            'anti_pad': [
-                {'layer_name': '1_Top', 'shape': 'circle', 'offset_x': '0', 'offset_y': '0', 'rotation': '0',
-                'diameter': '1mm'}
-            ],
-            'thermal_pad': [
-                {'layer_name': '1_Top', 'shape': 'round90', 'offset_x': '0', 'offset_y': '0', 'rotation': '0',
-                'inner': '1mm', 'channel_width': '0.2mm', 'isolation_gap': '0.3mm'},
-            ],
-            'hole': [
-                {'layer_name': '1_Top', 'shape': 'circle', 'offset_x': '0', 'offset_y': '0', 'rotation': '0',
-                 'diameter': '0.1499997mm'},
-            ]
-        }
-        """
-        pdef_data = self._pyedb_obj._padstack_def_data
-        pad_type_list = [
-            self._pedb._edb.Definition.PadType.RegularPad,
-            self._pedb._edb.Definition.PadType.AntiPad,
-            self._pedb._edb.Definition.PadType.ThermalPad,
-            # self._ppadstack._pedb._edb.Definition.PadType.Hole,
-            # This property doesn't appear in UI. It is unclear what it is used for. Suppressing this property for now.
-        ]
-        data = {}
-        for pad_type in pad_type_list:
-            pad_type_name = pascal_to_snake(pad_type.ToString())
-            temp_list = []
-            for lyr_name in list(pdef_data.GetLayerNames()):
-                result = pdef_data.GetPadParametersValue(lyr_name, pad_type)
-                _, pad_shape, params, offset_x, offset_y, rotation = result
-                pad_shape = pascal_to_snake(pad_shape.ToString())
-
-                pad_params = {}
-                pad_params["layer_name"] = lyr_name
-                pad_params["shape"] = pad_shape
-                pad_params["offset_x"] = offset_x.ToString()
-                pad_params["offset_y"] = offset_y.ToString()
-                pad_params["rotation"] = rotation.ToString()
-
-                for idx, i in enumerate(self.PAD_SHAPE_PARAMETERS[pad_shape]):
-                    pad_params[i] = params[idx].ToString()
-                temp_list.append(pad_params)
-            data[pad_type_name] = temp_list
-        return data
-
-    def _set_pad_parameters_to_edb(self, param):
-        pdef_data = self._pyedb_obj._padstack_def_data
-
-        pad_type_list = [
-            self._pedb._edb.Definition.PadType.RegularPad,
-            self._pedb._edb.Definition.PadType.AntiPad,
-            self._pedb._edb.Definition.PadType.ThermalPad,
-            self._pedb._edb.Definition.PadType.Hole,
-        ]
-        for pad_type in pad_type_list:
-            pad_type_name = pascal_to_snake(pad_type.ToString())
-            rpp = param.get(pad_type_name, [])
-            for idx, layer_data in enumerate(rpp):
-                # Get geometry type from kwargs
-                p = layer_data.get("shape")
-                temp_param = []
-
-                # Handle Circle geometry type
-                if p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Circle.ToString()):
-                    temp_param.append(layer_data["diameter"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Circle
-
-                # Handle Square geometry type
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Square.ToString()):
-                    temp_param.append(layer_data["size"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Square
-
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Rectangle.ToString()):
-                    temp_param.append(layer_data["x_size"])
-                    temp_param.append(layer_data["y_size"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Rectangle
-
-                # Handle Oval geometry type
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Oval.ToString()):
-                    temp_param.append(layer_data["x_size"])
-                    temp_param.append(layer_data["y_size"])
-                    temp_param.append(layer_data["corner_radius"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Oval
-
-                # Handle Bullet geometry type
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Bullet.ToString()):
-                    temp_param.append(layer_data["x_size"])
-                    temp_param.append(layer_data["y_size"])
-                    temp_param.append(layer_data["corner_radius"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Bullet
-
-                # Handle Round45 geometry type
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Round45.ToString()):
-                    temp_param.append(layer_data["inner"])
-                    temp_param.append(layer_data["channel_width"])
-                    temp_param.append(layer_data["isolation_gap"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Round45
-
-                # Handle Round90 geometry type
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.Round90.ToString()):
-                    temp_param.append(layer_data["inner"])
-                    temp_param.append(layer_data["channel_width"])
-                    temp_param.append(layer_data["isolation_gap"])
-                    pad_shape = self._pedb._edb.Definition.PadGeometryType.Round90
-                elif p == pascal_to_snake(self._pedb._edb.Definition.PadGeometryType.NoGeometry.ToString()):
-                    continue
-
-                # Set pad parameters for the current layer
-                pdef_data.SetPadParameters(
-                    layer_data["layer_name"],
-                    pad_type,
-                    pad_shape,
-                    convert_py_list_to_net_list([self._pedb.edb_value(i) for i in temp_param]),
-                    self._pedb.edb_value(layer_data.get("offset_x", 0)),
-                    self._pedb.edb_value(layer_data.get("offset_y", 0)),
-                    self._pedb.edb_value(layer_data.get("rotation", 0)),
+    class Common:
+        @property
+        def pyedb_obj(self):
+            return self.parent.pyedb_obj
+
+        def __init__(self, parent):
+            self.parent = parent
+            self.pedb = parent.pedb
+
+        def set_parameters_to_edb(self):
+            if self.parent.name is not None:
+                self.pyedb_obj.aedt_name = self.parent.name
+            if self.parent.net_name is not None:
+                self.pyedb_obj.net_name = self.pedb.nets.find_or_create_net(self.parent.net_name).name
+            if self.parent.layer_range[0] is not None:
+                self.pyedb_obj.start_layer = self.parent.layer_range[0]
+            if self.parent.layer_range[1] is not None:
+                self.pyedb_obj.stop_layer = self.parent.layer_range[1]
+            if self.parent.backdrill_parameters:
+                self.pyedb_obj.backdrill_parameters = self.parent.backdrill_parameters
+            if self.parent.solder_ball_layer:
+                self.pyedb_obj._edb_object.SetSolderBallLayer(
+                    self.pedb.stackup[self.parent.solder_ball_layer]._edb_object
                 )
-        self._pyedb_obj._padstack_def_data = pdef_data
-
-    def _get_hole_parameters_from_edb(self):
-        pdef_data = self._pyedb_obj._padstack_def_data
-        _, hole_shape, params, offset_x, offset_y, rotation = pdef_data.GetHoleParametersValue()
-        hole_shape = pascal_to_snake(hole_shape.ToString())
-
-        hole_params = {}
-        hole_params["shape"] = hole_shape
-        for idx, i in enumerate(self.PAD_SHAPE_PARAMETERS[hole_shape]):
-            hole_params[i] = params[idx].ToString()
-        hole_params["offset_x"] = offset_x.ToString()
-        hole_params["offset_y"] = offset_y.ToString()
-        hole_params["rotation"] = rotation.ToString()
-        return hole_params
-
-    def _set_hole_parameters_to_edb(self, params):
-        original_params = self.hole_parameters
-        pdef_data = self._pyedb_obj._padstack_def_data
-
-        temp_param = []
-        shape = params["shape"]
-        if shape == "no_geometry":
-            return  # .net api doesn't tell how to set no_geometry shape.
-        for idx, i in enumerate(self.PAD_SHAPE_PARAMETERS[shape]):
-            temp_param.append(params[i])
-            pedb_shape = getattr(self._pedb._edb.Definition.PadGeometryType, snake_to_pascal(shape))
-
-        pdef_data.SetHoleParameters(
-            pedb_shape,
-            convert_py_list_to_net_list([self._pedb.edb_value(i) for i in temp_param]),
-            self._pedb.edb_value(params.get("offset_x", original_params.get("offset_x", 0))),
-            self._pedb.edb_value(params.get("offset_y", original_params.get("offset_y", 0))),
-            self._pedb.edb_value(params.get("rotation", original_params.get("rotation", 0))),
-        )
-        self._pyedb_obj._padstack_def_data = pdef_data
 
-
-class CfgPadstackInstance(CfgBase):
-    """Instance data class."""
+            hole_override_enabled, hole_override_diam = self.pyedb_obj._edb_object.GetHoleOverrideValue()
+            hole_override_enabled = (
+                self.parent.hole_override_enabled if self.parent.hole_override_enabled else hole_override_enabled
+            )
+            hole_override_diam = (
+                self.parent.hole_override_diameter if self.parent.hole_override_diameter else hole_override_diam
+            )
+            self.pyedb_obj._edb_object.SetHoleOverride(hole_override_enabled, self.pedb.edb_value(hole_override_diam))
+
+        def retrieve_parameters_from_edb(self):
+            self.parent.name = self.pyedb_obj.aedt_name
+            self.parent.definition = self.pyedb_obj.padstack_definition
+            self.parent.backdrill_parameters = self.pyedb_obj.backdrill_parameters
+            _, position, rotation = self.pyedb_obj._edb_object.GetPositionAndRotationValue()
+            self.parent.position = [position.X.ToString(), position.Y.ToString()]
+            self.parent.rotation = rotation.ToString()
+            self.parent._id = self.pyedb_obj.id
+            (
+                self.parent.hole_override_enabled,
+                hole_override_diameter,
+            ) = self.pyedb_obj._edb_object.GetHoleOverrideValue()
+            self.parent.hole_override_diameter = hole_override_diameter.ToString()
+            self.parent.solder_ball_layer = self.pyedb_obj._edb_object.GetSolderBallLayer().GetName()
+            self.parent.layer_range = [self.pyedb_obj.start_layer, self.pyedb_obj.stop_layer]
+
+    class Grpc(Common):
+        def __init__(self, parent):
+            super().__init__(parent)
+
+    class DotNet(Grpc):
+        def __init__(self, parent):
+            super().__init__(parent)
 
     def __init__(self, pedb, pyedb_obj, **kwargs):
-        self._pedb = pedb
-        self._pyedb_obj = pyedb_obj
+        self.pedb = pedb
+        self.pyedb_obj = pyedb_obj
+        if os.environ["PYEDB_USE_DOTNET"] == "0":
+            self.api = self.Grpc(self)
+        else:
+            self.api = self.DotNet(self)
+
         self.name = kwargs.get("name", None)
         self.net_name = kwargs.get("net_name", "")
         self.layer_range = kwargs.get("layer_range", [None, None])
@@ -349,35 +437,3 @@ class CfgPadstackInstance(CfgBase):
         self.hole_override_enabled = kwargs.get("hole_override_enabled", None)
         self.hole_override_diameter = kwargs.get("hole_override_diameter", None)
         self.solder_ball_layer = kwargs.get("solder_ball_layer", None)
-
-    def set_parameters_to_edb(self):
-        if self.name is not None:
-            self._pyedb_obj.aedt_name = self.name
-        if self.net_name is not None:
-            self._pyedb_obj.net_name = self._pedb.nets.find_or_create_net(self.net_name).name
-        if self.layer_range[0] is not None:
-            self._pyedb_obj.start_layer = self.layer_range[0]
-        if self.layer_range[1] is not None:
-            self._pyedb_obj.stop_layer = self.layer_range[1]
-        if self.backdrill_parameters:
-            self._pyedb_obj.backdrill_parameters = self.backdrill_parameters
-        if self.solder_ball_layer:
-            self._pyedb_obj._edb_object.SetSolderBallLayer(self._pedb.stackup[self.solder_ball_layer]._edb_object)
-
-        hole_override_enabled, hole_override_diam = self._pyedb_obj._edb_object.GetHoleOverrideValue()
-        hole_override_enabled = self.hole_override_enabled if self.hole_override_enabled else hole_override_enabled
-        hole_override_diam = self.hole_override_diameter if self.hole_override_diameter else hole_override_diam
-        self._pyedb_obj._edb_object.SetHoleOverride(hole_override_enabled, self._pedb.edb_value(hole_override_diam))
-
-    def retrieve_parameters_from_edb(self):
-        self.name = self._pyedb_obj.aedt_name
-        self.definition = self._pyedb_obj.padstack_definition
-        self.backdrill_parameters = self._pyedb_obj.backdrill_parameters
-        _, position, rotation = self._pyedb_obj._edb_object.GetPositionAndRotationValue()
-        self.position = [position.X.ToString(), position.Y.ToString()]
-        self.rotation = rotation.ToString()
-        self._id = self._pyedb_obj.id
-        self.hole_override_enabled, hole_override_diameter = self._pyedb_obj._edb_object.GetHoleOverrideValue()
-        self.hole_override_diameter = hole_override_diameter.ToString()
-        self.solder_ball_layer = self._pyedb_obj._edb_object.GetSolderBallLayer().GetName()
-        self.layer_range = [self._pyedb_obj.start_layer, self._pyedb_obj.stop_layer]