pulumi-vsphere 4.10.0a1710245029__py3-none-any.whl → 4.13.0a1736836157__py3-none-any.whl

pulumi_vsphere/get_virtual_machine.py

@@ -4,9 +4,14 @@
 
 import copy
 import warnings
+import sys
 import pulumi
 import pulumi.runtime
 from typing import Any, Mapping, Optional, Sequence, Union, overload
+if sys.version_info >= (3, 11):
+    from typing import NotRequired, TypedDict, TypeAlias
+else:
+    from typing_extensions import NotRequired, TypedDict, TypeAlias
 from . import _utilities
 from . import outputs
 from ._inputs import *
@@ -23,7 +28,7 @@ class GetVirtualMachineResult:
     """
     A collection of values returned by getVirtualMachine.
     """
-    def __init__(__self__, alternate_guest_name=None, annotation=None, boot_delay=None, boot_retry_delay=None, boot_retry_enabled=None, change_version=None, cpu_hot_add_enabled=None, cpu_hot_remove_enabled=None, cpu_limit=None, cpu_performance_counters_enabled=None, cpu_reservation=None, cpu_share_count=None, cpu_share_level=None, datacenter_id=None, default_ip_address=None, disks=None, efi_secure_boot_enabled=None, enable_disk_uuid=None, enable_logging=None, ept_rvi_mode=None, extra_config=None, extra_config_reboot_required=None, firmware=None, folder=None, guest_id=None, guest_ip_addresses=None, hardware_version=None, hv_mode=None, id=None, ide_controller_scan_count=None, latency_sensitivity=None, memory=None, memory_hot_add_enabled=None, memory_limit=None, memory_reservation=None, memory_reservation_locked_to_max=None, memory_share_count=None, memory_share_level=None, moid=None, name=None, nested_hv_enabled=None, network_interface_types=None, network_interfaces=None, num_cores_per_socket=None, num_cpus=None, replace_trigger=None, run_tools_scripts_after_power_on=None, run_tools_scripts_after_resume=None, run_tools_scripts_before_guest_reboot=None, run_tools_scripts_before_guest_shutdown=None, run_tools_scripts_before_guest_standby=None, sata_controller_scan_count=None, scsi_bus_sharing=None, scsi_controller_scan_count=None, scsi_type=None, storage_policy_id=None, swap_placement_policy=None, sync_time_with_host=None, sync_time_with_host_periodically=None, tools_upgrade_policy=None, uuid=None, vapp=None, vapp_transports=None, vbs_enabled=None, vvtd_enabled=None):
+    def __init__(__self__, alternate_guest_name=None, annotation=None, boot_delay=None, boot_retry_delay=None, boot_retry_enabled=None, change_version=None, cpu_hot_add_enabled=None, cpu_hot_remove_enabled=None, cpu_limit=None, cpu_performance_counters_enabled=None, cpu_reservation=None, cpu_share_count=None, cpu_share_level=None, datacenter_id=None, default_ip_address=None, disks=None, efi_secure_boot_enabled=None, enable_disk_uuid=None, enable_logging=None, ept_rvi_mode=None, extra_config=None, extra_config_reboot_required=None, firmware=None, folder=None, guest_id=None, guest_ip_addresses=None, hardware_version=None, hv_mode=None, id=None, ide_controller_scan_count=None, instance_uuid=None, latency_sensitivity=None, memory=None, memory_hot_add_enabled=None, memory_limit=None, memory_reservation=None, memory_reservation_locked_to_max=None, memory_share_count=None, memory_share_level=None, moid=None, name=None, nested_hv_enabled=None, network_interface_types=None, network_interfaces=None, num_cores_per_socket=None, num_cpus=None, replace_trigger=None, run_tools_scripts_after_power_on=None, run_tools_scripts_after_resume=None, run_tools_scripts_before_guest_reboot=None, run_tools_scripts_before_guest_shutdown=None, run_tools_scripts_before_guest_standby=None, sata_controller_scan_count=None, scsi_bus_sharing=None, scsi_controller_scan_count=None, scsi_type=None, storage_policy_id=None, swap_placement_policy=None, sync_time_with_host=None, sync_time_with_host_periodically=None, tools_upgrade_policy=None, uuid=None, vapp=None, vapp_transports=None, vbs_enabled=None, vtpm=None, vvtd_enabled=None):
         if alternate_guest_name and not isinstance(alternate_guest_name, str):
             raise TypeError("Expected argument 'alternate_guest_name' to be a str")
         pulumi.set(__self__, "alternate_guest_name", alternate_guest_name)
@@ -114,6 +119,9 @@ class GetVirtualMachineResult:
         if ide_controller_scan_count and not isinstance(ide_controller_scan_count, int):
             raise TypeError("Expected argument 'ide_controller_scan_count' to be a int")
         pulumi.set(__self__, "ide_controller_scan_count", ide_controller_scan_count)
+        if instance_uuid and not isinstance(instance_uuid, str):
+            raise TypeError("Expected argument 'instance_uuid' to be a str")
+        pulumi.set(__self__, "instance_uuid", instance_uuid)
         if latency_sensitivity and not isinstance(latency_sensitivity, str):
             raise TypeError("Expected argument 'latency_sensitivity' to be a str")
         pulumi.set(__self__, "latency_sensitivity", latency_sensitivity)
@@ -216,6 +224,9 @@ class GetVirtualMachineResult:
         if vbs_enabled and not isinstance(vbs_enabled, bool):
             raise TypeError("Expected argument 'vbs_enabled' to be a bool")
         pulumi.set(__self__, "vbs_enabled", vbs_enabled)
+        if vtpm and not isinstance(vtpm, bool):
+            raise TypeError("Expected argument 'vtpm' to be a bool")
+        pulumi.set(__self__, "vtpm", vtpm)
         if vvtd_enabled and not isinstance(vvtd_enabled, bool):
             raise TypeError("Expected argument 'vvtd_enabled' to be a bool")
         pulumi.set(__self__, "vvtd_enabled", vvtd_enabled)
@@ -225,7 +236,8 @@ class GetVirtualMachineResult:
     def alternate_guest_name(self) -> Optional[str]:
         """
         The alternate guest name of the virtual machine when
-        `guest_id` is a non-specific operating system, like `otherGuest` or `otherGuest64`.
+        `guest_id` is a non-specific operating system, like `otherGuest` or
+        `otherGuest64`.
         """
         return pulumi.get(self, "alternate_guest_name")
 
@@ -301,11 +313,11 @@ class GetVirtualMachineResult:
     @pulumi.getter(name="defaultIpAddress")
     def default_ip_address(self) -> str:
         """
-        Whenever possible, this is the first IPv4 address that is reachable through
-        the default gateway configured on the machine, then the first reachable IPv6
-        address, and then the first general discovered address if neither exist. If
-        VMware Tools is not running on the virtual machine, or if the VM is powered
-        off, this value will be blank.
+        Whenever possible, this is the first IPv4 address that
+        is reachable through the default gateway configured on the machine, then the
+        first reachable IPv6 address, and then the first general discovered address if
+        neither exist. If VMware Tools is not running on the virtual machine, or if
+        the VM is powered off, this value will be blank.
         """
         return pulumi.get(self, "default_ip_address")
 
@@ -317,10 +329,10 @@ class GetVirtualMachineResult:
         template. These are sorted by bus and unit number so that they can be applied
         to a `VirtualMachine` resource in the order the resource expects
         while cloning. This is useful for discovering certain disk settings while
-        performing a linked clone, as all settings that are output by this data
-        source must be the same on the destination virtual machine as the source.
-        Only the first number of controllers defined by `scsi_controller_scan_count`
-        are scanned for disks. The sub-attributes are:
+        performing a linked clone, as all settings that are output by this data source
+        must be the same on the destination virtual machine as the source. Only the
+        first number of controllers defined by `scsi_controller_scan_count` are
+        scanned for disks. The sub-attributes are:
         """
         return pulumi.get(self, "disks")
 
@@ -341,7 +353,7 @@ class GetVirtualMachineResult:
 
     @property
     @pulumi.getter(name="eptRviMode")
-    def ept_rvi_mode(self) -> Optional[str]:
+    def ept_rvi_mode(self) -> str:
         return pulumi.get(self, "ept_rvi_mode")
 
     @property
@@ -358,7 +370,8 @@ class GetVirtualMachineResult:
     @pulumi.getter
     def firmware(self) -> Optional[str]:
         """
-        The firmware type for this virtual machine. Can be `bios` or `efi`.
+        The firmware type for this virtual machine. Can be `bios` or
+        `efi`.
         """
         return pulumi.get(self, "firmware")
 
@@ -393,7 +406,7 @@ class GetVirtualMachineResult:
 
     @property
     @pulumi.getter(name="hvMode")
-    def hv_mode(self) -> Optional[str]:
+    def hv_mode(self) -> str:
         return pulumi.get(self, "hv_mode")
 
     @property
@@ -409,6 +422,14 @@ class GetVirtualMachineResult:
     def ide_controller_scan_count(self) -> Optional[int]:
         return pulumi.get(self, "ide_controller_scan_count")
 
+    @property
+    @pulumi.getter(name="instanceUuid")
+    def instance_uuid(self) -> str:
+        """
+        The instance UUID of the virtual machine or template.
+        """
+        return pulumi.get(self, "instance_uuid")
+
     @property
     @pulumi.getter(name="latencySensitivity")
     def latency_sensitivity(self) -> Optional[str]:
@@ -473,7 +494,8 @@ class GetVirtualMachineResult:
         """
         The network interface types for each network
         interface found on the virtual machine, in device bus order. Will be one of
-        `e1000`, `e1000e`, `pcnet32`, `sriov`, `vmxnet2`, `vmxnet3vrdma`, or `vmxnet3`.
+        `e1000`, `e1000e`, `pcnet32`, `sriov`, `vmxnet2`, `vmxnet3vrdma`, or
+        `vmxnet3`.
         """
         return pulumi.get(self, "network_interface_types")
 
@@ -481,13 +503,13 @@ class GetVirtualMachineResult:
     @pulumi.getter(name="networkInterfaces")
     def network_interfaces(self) -> Sequence['outputs.GetVirtualMachineNetworkInterfaceResult']:
         """
-        Information about each of the network interfaces on this 
-        virtual machine or template. These are sorted by device bus order so that they
-        can be applied to a `VirtualMachine` resource in the order the resource
-        expects while cloning. This is useful for discovering certain network interface
-        settings while performing a linked clone, as all settings that are output by this
-        data source must be the same on the destination virtual machine as the source.
-        The sub-attributes are:
+        Information about each of the network interfaces on
+        this virtual machine or template. These are sorted by device bus order so that
+        they can be applied to a `VirtualMachine` resource in the order the
+        resource expects while cloning. This is useful for discovering certain network
+        interface settings while performing a linked clone, as all settings that are
+        output by this data source must be the same on the destination virtual machine
+        as the source. The sub-attributes are:
         """
         return pulumi.get(self, "network_interfaces")
 
@@ -495,7 +517,8 @@ class GetVirtualMachineResult:
     @pulumi.getter(name="numCoresPerSocket")
     def num_cores_per_socket(self) -> Optional[int]:
         """
-        The number of cores per socket for this virtual machine.
+        The number of cores per socket for this virtual
+        machine.
         """
         return pulumi.get(self, "num_cores_per_socket")
 
@@ -615,6 +638,14 @@ class GetVirtualMachineResult:
     def vbs_enabled(self) -> Optional[bool]:
         return pulumi.get(self, "vbs_enabled")
 
+    @property
+    @pulumi.getter
+    def vtpm(self) -> bool:
+        """
+        Indicates whether a virtual Trusted Platform Module (TPM) device is present on the virtual machine.
+        """
+        return pulumi.get(self, "vtpm")
+
     @property
     @pulumi.getter(name="vvtdEnabled")
     def vvtd_enabled(self) -> Optional[bool]:
@@ -657,6 +688,7 @@ class AwaitableGetVirtualMachineResult(GetVirtualMachineResult):
             hv_mode=self.hv_mode,
             id=self.id,
             ide_controller_scan_count=self.ide_controller_scan_count,
+            instance_uuid=self.instance_uuid,
             latency_sensitivity=self.latency_sensitivity,
             memory=self.memory,
             memory_hot_add_enabled=self.memory_hot_add_enabled,
@@ -691,6 +723,7 @@ class AwaitableGetVirtualMachineResult(GetVirtualMachineResult):
             vapp=self.vapp,
             vapp_transports=self.vapp_transports,
             vbs_enabled=self.vbs_enabled,
+            vtpm=self.vtpm,
             vvtd_enabled=self.vvtd_enabled)
 
 
@@ -746,7 +779,7 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
                         sync_time_with_host_periodically: Optional[bool] = None,
                         tools_upgrade_policy: Optional[str] = None,
                         uuid: Optional[str] = None,
-                        vapp: Optional[pulumi.InputType['GetVirtualMachineVappArgs']] = None,
+                        vapp: Optional[Union['GetVirtualMachineVappArgs', 'GetVirtualMachineVappArgsDict']] = None,
                         vbs_enabled: Optional[bool] = None,
                         vvtd_enabled: Optional[bool] = None,
                         opts: Optional[pulumi.InvokeOptions] = None) -> AwaitableGetVirtualMachineResult:
@@ -759,10 +792,9 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
 
     ## Example Usage
 
-    In the following example, a virtual machine template is returned by its
-    unique name within the `Datacenter`.
+    In the following example, a virtual machine template is returned by its unique
+    name within the `Datacenter`.
 
-    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -771,11 +803,10 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
     template = vsphere.get_virtual_machine(name="ubuntu-server-template",
         datacenter_id=datacenter.id)
     ```
-    <!--End PulumiCodeChooser -->
+
     In the following example, each virtual machine template is returned by its
     unique full path within the `Datacenter`.
 
-    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -786,18 +817,19 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
     development_template = vsphere.get_virtual_machine(name="development/templates/ubuntu-server-template",
         datacenter_id=datacenter.id)
     ```
-    <!--End PulumiCodeChooser -->
 
 
     :param str alternate_guest_name: The alternate guest name of the virtual machine when
-           `guest_id` is a non-specific operating system, like `otherGuest` or `otherGuest64`.
+           `guest_id` is a non-specific operating system, like `otherGuest` or
+           `otherGuest64`.
     :param str annotation: The user-provided description of this virtual machine.
     :param str datacenter_id: The managed object reference
            ID of the datacenter the virtual machine is located in.
            This can be omitted if the search path used in `name` is an absolute path.
            For default datacenters, use the `id` attribute from an empty
            `Datacenter` data source.
-    :param str firmware: The firmware type for this virtual machine. Can be `bios` or `efi`.
+    :param str firmware: The firmware type for this virtual machine. Can be `bios` or
+           `efi`.
     :param str folder: The name of the virtual machine folder where the virtual machine is located. The `name` argument is limited to 80 characters. If the `name` argument includes the full path to the virtual machine and exceeds the 80 characters limit, the `folder` folder argument can be used.
     :param str guest_id: The guest ID of the virtual machine or template.
     :param int hardware_version: The hardware version number on this virtual machine.
@@ -805,7 +837,8 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
     :param str name: The name of the virtual machine. This can be a name or
            the full path relative to the datacenter. This is required if a UUID lookup
            is not performed.
-    :param int num_cores_per_socket: The number of cores per socket for this virtual machine.
+    :param int num_cores_per_socket: The number of cores per socket for this virtual
+           machine.
     :param int num_cpus: The total number of virtual processor cores assigned to this
            virtual machine.
     :param int scsi_controller_scan_count: The number of SCSI controllers to
@@ -909,6 +942,7 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
         hv_mode=pulumi.get(__ret__, 'hv_mode'),
         id=pulumi.get(__ret__, 'id'),
         ide_controller_scan_count=pulumi.get(__ret__, 'ide_controller_scan_count'),
+        instance_uuid=pulumi.get(__ret__, 'instance_uuid'),
         latency_sensitivity=pulumi.get(__ret__, 'latency_sensitivity'),
         memory=pulumi.get(__ret__, 'memory'),
         memory_hot_add_enabled=pulumi.get(__ret__, 'memory_hot_add_enabled'),
@@ -943,10 +977,8 @@ def get_virtual_machine(alternate_guest_name: Optional[str] = None,
         vapp=pulumi.get(__ret__, 'vapp'),
         vapp_transports=pulumi.get(__ret__, 'vapp_transports'),
         vbs_enabled=pulumi.get(__ret__, 'vbs_enabled'),
+        vtpm=pulumi.get(__ret__, 'vtpm'),
         vvtd_enabled=pulumi.get(__ret__, 'vvtd_enabled'))
-
-
-@_utilities.lift_output_func(get_virtual_machine)
 def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optional[str]]] = None,
                                annotation: Optional[pulumi.Input[Optional[str]]] = None,
                                boot_delay: Optional[pulumi.Input[Optional[int]]] = None,
@@ -999,10 +1031,10 @@ def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optio
                                sync_time_with_host_periodically: Optional[pulumi.Input[Optional[bool]]] = None,
                                tools_upgrade_policy: Optional[pulumi.Input[Optional[str]]] = None,
                                uuid: Optional[pulumi.Input[Optional[str]]] = None,
-                               vapp: Optional[pulumi.Input[Optional[pulumi.InputType['GetVirtualMachineVappArgs']]]] = None,
+                               vapp: Optional[pulumi.Input[Optional[Union['GetVirtualMachineVappArgs', 'GetVirtualMachineVappArgsDict']]]] = None,
                                vbs_enabled: Optional[pulumi.Input[Optional[bool]]] = None,
                                vvtd_enabled: Optional[pulumi.Input[Optional[bool]]] = None,
-                               opts: Optional[pulumi.InvokeOptions] = None) -> pulumi.Output[GetVirtualMachineResult]:
+                               opts: Optional[Union[pulumi.InvokeOptions, pulumi.InvokeOutputOptions]] = None) -> pulumi.Output[GetVirtualMachineResult]:
     """
     The `VirtualMachine` data source can be used to find the UUID of an
     existing virtual machine or template. The most common purpose is for finding
@@ -1012,10 +1044,9 @@ def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optio
 
     ## Example Usage
 
-    In the following example, a virtual machine template is returned by its
-    unique name within the `Datacenter`.
+    In the following example, a virtual machine template is returned by its unique
+    name within the `Datacenter`.
 
-    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -1024,11 +1055,10 @@ def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optio
     template = vsphere.get_virtual_machine(name="ubuntu-server-template",
         datacenter_id=datacenter.id)
     ```
-    <!--End PulumiCodeChooser -->
+
     In the following example, each virtual machine template is returned by its
     unique full path within the `Datacenter`.
 
-    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -1039,18 +1069,19 @@ def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optio
     development_template = vsphere.get_virtual_machine(name="development/templates/ubuntu-server-template",
         datacenter_id=datacenter.id)
     ```
-    <!--End PulumiCodeChooser -->
 
 
     :param str alternate_guest_name: The alternate guest name of the virtual machine when
-           `guest_id` is a non-specific operating system, like `otherGuest` or `otherGuest64`.
+           `guest_id` is a non-specific operating system, like `otherGuest` or
+           `otherGuest64`.
     :param str annotation: The user-provided description of this virtual machine.
     :param str datacenter_id: The managed object reference
            ID of the datacenter the virtual machine is located in.
            This can be omitted if the search path used in `name` is an absolute path.
            For default datacenters, use the `id` attribute from an empty
            `Datacenter` data source.
-    :param str firmware: The firmware type for this virtual machine. Can be `bios` or `efi`.
+    :param str firmware: The firmware type for this virtual machine. Can be `bios` or
+           `efi`.
     :param str folder: The name of the virtual machine folder where the virtual machine is located. The `name` argument is limited to 80 characters. If the `name` argument includes the full path to the virtual machine and exceeds the 80 characters limit, the `folder` folder argument can be used.
     :param str guest_id: The guest ID of the virtual machine or template.
     :param int hardware_version: The hardware version number on this virtual machine.
@@ -1058,7 +1089,8 @@ def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optio
     :param str name: The name of the virtual machine. This can be a name or
            the full path relative to the datacenter. This is required if a UUID lookup
            is not performed.
-    :param int num_cores_per_socket: The number of cores per socket for this virtual machine.
+    :param int num_cores_per_socket: The number of cores per socket for this virtual
+           machine.
     :param int num_cpus: The total number of virtual processor cores assigned to this
            virtual machine.
     :param int scsi_controller_scan_count: The number of SCSI controllers to
@@ -1072,4 +1104,129 @@ def get_virtual_machine_output(alternate_guest_name: Optional[pulumi.Input[Optio
     :param str uuid: Specify this field for a UUID lookup, `name` and `datacenter_id`
            are not required if this is specified.
     """
-    ...
+    __args__ = dict()
+    __args__['alternateGuestName'] = alternate_guest_name
+    __args__['annotation'] = annotation
+    __args__['bootDelay'] = boot_delay
+    __args__['bootRetryDelay'] = boot_retry_delay
+    __args__['bootRetryEnabled'] = boot_retry_enabled
+    __args__['cpuHotAddEnabled'] = cpu_hot_add_enabled
+    __args__['cpuHotRemoveEnabled'] = cpu_hot_remove_enabled
+    __args__['cpuLimit'] = cpu_limit
+    __args__['cpuPerformanceCountersEnabled'] = cpu_performance_counters_enabled
+    __args__['cpuReservation'] = cpu_reservation
+    __args__['cpuShareCount'] = cpu_share_count
+    __args__['cpuShareLevel'] = cpu_share_level
+    __args__['datacenterId'] = datacenter_id
+    __args__['efiSecureBootEnabled'] = efi_secure_boot_enabled
+    __args__['enableDiskUuid'] = enable_disk_uuid
+    __args__['enableLogging'] = enable_logging
+    __args__['eptRviMode'] = ept_rvi_mode
+    __args__['extraConfig'] = extra_config
+    __args__['extraConfigRebootRequired'] = extra_config_reboot_required
+    __args__['firmware'] = firmware
+    __args__['folder'] = folder
+    __args__['guestId'] = guest_id
+    __args__['hardwareVersion'] = hardware_version
+    __args__['hvMode'] = hv_mode
+    __args__['ideControllerScanCount'] = ide_controller_scan_count
+    __args__['latencySensitivity'] = latency_sensitivity
+    __args__['memory'] = memory
+    __args__['memoryHotAddEnabled'] = memory_hot_add_enabled
+    __args__['memoryLimit'] = memory_limit
+    __args__['memoryReservation'] = memory_reservation
+    __args__['memoryReservationLockedToMax'] = memory_reservation_locked_to_max
+    __args__['memoryShareCount'] = memory_share_count
+    __args__['memoryShareLevel'] = memory_share_level
+    __args__['moid'] = moid
+    __args__['name'] = name
+    __args__['nestedHvEnabled'] = nested_hv_enabled
+    __args__['numCoresPerSocket'] = num_cores_per_socket
+    __args__['numCpus'] = num_cpus
+    __args__['replaceTrigger'] = replace_trigger
+    __args__['runToolsScriptsAfterPowerOn'] = run_tools_scripts_after_power_on
+    __args__['runToolsScriptsAfterResume'] = run_tools_scripts_after_resume
+    __args__['runToolsScriptsBeforeGuestReboot'] = run_tools_scripts_before_guest_reboot
+    __args__['runToolsScriptsBeforeGuestShutdown'] = run_tools_scripts_before_guest_shutdown
+    __args__['runToolsScriptsBeforeGuestStandby'] = run_tools_scripts_before_guest_standby
+    __args__['sataControllerScanCount'] = sata_controller_scan_count
+    __args__['scsiControllerScanCount'] = scsi_controller_scan_count
+    __args__['storagePolicyId'] = storage_policy_id
+    __args__['swapPlacementPolicy'] = swap_placement_policy
+    __args__['syncTimeWithHost'] = sync_time_with_host
+    __args__['syncTimeWithHostPeriodically'] = sync_time_with_host_periodically
+    __args__['toolsUpgradePolicy'] = tools_upgrade_policy
+    __args__['uuid'] = uuid
+    __args__['vapp'] = vapp
+    __args__['vbsEnabled'] = vbs_enabled
+    __args__['vvtdEnabled'] = vvtd_enabled
+    opts = pulumi.InvokeOutputOptions.merge(_utilities.get_invoke_opts_defaults(), opts)
+    __ret__ = pulumi.runtime.invoke_output('vsphere:index/getVirtualMachine:getVirtualMachine', __args__, opts=opts, typ=GetVirtualMachineResult)
+    return __ret__.apply(lambda __response__: GetVirtualMachineResult(
+        alternate_guest_name=pulumi.get(__response__, 'alternate_guest_name'),
+        annotation=pulumi.get(__response__, 'annotation'),
+        boot_delay=pulumi.get(__response__, 'boot_delay'),
+        boot_retry_delay=pulumi.get(__response__, 'boot_retry_delay'),
+        boot_retry_enabled=pulumi.get(__response__, 'boot_retry_enabled'),
+        change_version=pulumi.get(__response__, 'change_version'),
+        cpu_hot_add_enabled=pulumi.get(__response__, 'cpu_hot_add_enabled'),
+        cpu_hot_remove_enabled=pulumi.get(__response__, 'cpu_hot_remove_enabled'),
+        cpu_limit=pulumi.get(__response__, 'cpu_limit'),
+        cpu_performance_counters_enabled=pulumi.get(__response__, 'cpu_performance_counters_enabled'),
+        cpu_reservation=pulumi.get(__response__, 'cpu_reservation'),
+        cpu_share_count=pulumi.get(__response__, 'cpu_share_count'),
+        cpu_share_level=pulumi.get(__response__, 'cpu_share_level'),
+        datacenter_id=pulumi.get(__response__, 'datacenter_id'),
+        default_ip_address=pulumi.get(__response__, 'default_ip_address'),
+        disks=pulumi.get(__response__, 'disks'),
+        efi_secure_boot_enabled=pulumi.get(__response__, 'efi_secure_boot_enabled'),
+        enable_disk_uuid=pulumi.get(__response__, 'enable_disk_uuid'),
+        enable_logging=pulumi.get(__response__, 'enable_logging'),
+        ept_rvi_mode=pulumi.get(__response__, 'ept_rvi_mode'),
+        extra_config=pulumi.get(__response__, 'extra_config'),
+        extra_config_reboot_required=pulumi.get(__response__, 'extra_config_reboot_required'),
+        firmware=pulumi.get(__response__, 'firmware'),
+        folder=pulumi.get(__response__, 'folder'),
+        guest_id=pulumi.get(__response__, 'guest_id'),
+        guest_ip_addresses=pulumi.get(__response__, 'guest_ip_addresses'),
+        hardware_version=pulumi.get(__response__, 'hardware_version'),
+        hv_mode=pulumi.get(__response__, 'hv_mode'),
+        id=pulumi.get(__response__, 'id'),
+        ide_controller_scan_count=pulumi.get(__response__, 'ide_controller_scan_count'),
+        instance_uuid=pulumi.get(__response__, 'instance_uuid'),
+        latency_sensitivity=pulumi.get(__response__, 'latency_sensitivity'),
+        memory=pulumi.get(__response__, 'memory'),
+        memory_hot_add_enabled=pulumi.get(__response__, 'memory_hot_add_enabled'),
+        memory_limit=pulumi.get(__response__, 'memory_limit'),
+        memory_reservation=pulumi.get(__response__, 'memory_reservation'),
+        memory_reservation_locked_to_max=pulumi.get(__response__, 'memory_reservation_locked_to_max'),
+        memory_share_count=pulumi.get(__response__, 'memory_share_count'),
+        memory_share_level=pulumi.get(__response__, 'memory_share_level'),
+        moid=pulumi.get(__response__, 'moid'),
+        name=pulumi.get(__response__, 'name'),
+        nested_hv_enabled=pulumi.get(__response__, 'nested_hv_enabled'),
+        network_interface_types=pulumi.get(__response__, 'network_interface_types'),
+        network_interfaces=pulumi.get(__response__, 'network_interfaces'),
+        num_cores_per_socket=pulumi.get(__response__, 'num_cores_per_socket'),
+        num_cpus=pulumi.get(__response__, 'num_cpus'),
+        replace_trigger=pulumi.get(__response__, 'replace_trigger'),
+        run_tools_scripts_after_power_on=pulumi.get(__response__, 'run_tools_scripts_after_power_on'),
+        run_tools_scripts_after_resume=pulumi.get(__response__, 'run_tools_scripts_after_resume'),
+        run_tools_scripts_before_guest_reboot=pulumi.get(__response__, 'run_tools_scripts_before_guest_reboot'),
+        run_tools_scripts_before_guest_shutdown=pulumi.get(__response__, 'run_tools_scripts_before_guest_shutdown'),
+        run_tools_scripts_before_guest_standby=pulumi.get(__response__, 'run_tools_scripts_before_guest_standby'),
+        sata_controller_scan_count=pulumi.get(__response__, 'sata_controller_scan_count'),
+        scsi_bus_sharing=pulumi.get(__response__, 'scsi_bus_sharing'),
+        scsi_controller_scan_count=pulumi.get(__response__, 'scsi_controller_scan_count'),
+        scsi_type=pulumi.get(__response__, 'scsi_type'),
+        storage_policy_id=pulumi.get(__response__, 'storage_policy_id'),
+        swap_placement_policy=pulumi.get(__response__, 'swap_placement_policy'),
+        sync_time_with_host=pulumi.get(__response__, 'sync_time_with_host'),
+        sync_time_with_host_periodically=pulumi.get(__response__, 'sync_time_with_host_periodically'),
+        tools_upgrade_policy=pulumi.get(__response__, 'tools_upgrade_policy'),
+        uuid=pulumi.get(__response__, 'uuid'),
+        vapp=pulumi.get(__response__, 'vapp'),
+        vapp_transports=pulumi.get(__response__, 'vapp_transports'),
+        vbs_enabled=pulumi.get(__response__, 'vbs_enabled'),
+        vtpm=pulumi.get(__response__, 'vtpm'),
+        vvtd_enabled=pulumi.get(__response__, 'vvtd_enabled')))

pulumi_vsphere/get_vmfs_disks.py

@@ -4,9 +4,14 @@
 
 import copy
 import warnings
+import sys
 import pulumi
 import pulumi.runtime
 from typing import Any, Mapping, Optional, Sequence, Union, overload
+if sys.version_info >= (3, 11):
+    from typing import NotRequired, TypedDict, TypeAlias
+else:
+    from typing_extensions import NotRequired, TypedDict, TypeAlias
 from . import _utilities
 
 __all__ = [
@@ -96,7 +101,6 @@ def get_vmfs_disks(filter: Optional[str] = None,
 
     ## Example Usage
 
-    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -108,7 +112,6 @@ def get_vmfs_disks(filter: Optional[str] = None,
         rescan=True,
         filter="mpx.vmhba1:C0:T[12]:L0")
     ```
-    <!--End PulumiCodeChooser -->
 
 
     :param str filter: A regular expression to filter the disks against. Only
@@ -136,13 +139,10 @@ def get_vmfs_disks(filter: Optional[str] = None,
         host_system_id=pulumi.get(__ret__, 'host_system_id'),
         id=pulumi.get(__ret__, 'id'),
         rescan=pulumi.get(__ret__, 'rescan'))
-
-
-@_utilities.lift_output_func(get_vmfs_disks)
 def get_vmfs_disks_output(filter: Optional[pulumi.Input[Optional[str]]] = None,
                           host_system_id: Optional[pulumi.Input[str]] = None,
                           rescan: Optional[pulumi.Input[Optional[bool]]] = None,
-                          opts: Optional[pulumi.InvokeOptions] = None) -> pulumi.Output[GetVmfsDisksResult]:
+                          opts: Optional[Union[pulumi.InvokeOptions, pulumi.InvokeOutputOptions]] = None) -> pulumi.Output[GetVmfsDisksResult]:
     """
     The `get_vmfs_disks` data source can be used to discover the storage
     devices available on an ESXi host. This data source can be combined with the
@@ -151,7 +151,6 @@ def get_vmfs_disks_output(filter: Optional[pulumi.Input[Optional[str]]] = None,
 
     ## Example Usage
 
-    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -163,7 +162,6 @@ def get_vmfs_disks_output(filter: Optional[pulumi.Input[Optional[str]]] = None,
         rescan=True,
         filter="mpx.vmhba1:C0:T[12]:L0")
     ```
-    <!--End PulumiCodeChooser -->
 
 
     :param str filter: A regular expression to filter the disks against. Only
@@ -178,4 +176,15 @@ def get_vmfs_disks_output(filter: Optional[pulumi.Input[Optional[str]]] = None,
            searching for disks. This may lengthen the time it takes to perform the
            search. Default: `false`.
     """
-    ...
+    __args__ = dict()
+    __args__['filter'] = filter
+    __args__['hostSystemId'] = host_system_id
+    __args__['rescan'] = rescan
+    opts = pulumi.InvokeOutputOptions.merge(_utilities.get_invoke_opts_defaults(), opts)
+    __ret__ = pulumi.runtime.invoke_output('vsphere:index/getVmfsDisks:getVmfsDisks', __args__, opts=opts, typ=GetVmfsDisksResult)
+    return __ret__.apply(lambda __response__: GetVmfsDisksResult(
+        disks=pulumi.get(__response__, 'disks'),
+        filter=pulumi.get(__response__, 'filter'),
+        host_system_id=pulumi.get(__response__, 'host_system_id'),
+        id=pulumi.get(__response__, 'id'),
+        rescan=pulumi.get(__response__, 'rescan')))