pulumi-sdwan 0.6.0a1760684516__py3-none-any.whl → 0.6.0a1762412463__py3-none-any.whl

pulumi_sdwan/service_routing_bgp_feature.py

@@ -1887,6 +1887,103 @@ class ServiceRoutingBgpFeature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingBgpFeature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            as_number=429,
+            router_id="1.2.3.4",
+            propagate_as_path=False,
+            propagate_community=False,
+            external_routes_distance=20,
+            internal_routes_distance=200,
+            local_routes_distance=20,
+            keepalive_time=60,
+            hold_time=180,
+            always_compare_med=False,
+            deterministic_med=False,
+            missing_med_as_worst=False,
+            compare_router_id=False,
+            multipath_relax=False,
+            ipv4_neighbors=[{
+                "address": "1.2.3.4",
+                "description": "neighbor1",
+                "shutdown": False,
+                "remote_as": 200,
+                "local_as": 200,
+                "keepalive_time": 40,
+                "hold_time": 200,
+                "update_source_interface": "GigabitEthernet0",
+                "next_hop_self": False,
+                "send_community": True,
+                "send_extended_community": True,
+                "ebgp_multihop": 1,
+                "password": "myPassword",
+                "send_label": True,
+                "as_override": False,
+                "allowas_in_number": 1,
+                "address_families": [{
+                    "family_type": "ipv4-unicast",
+                    "policy_type": "restart",
+                    "restart_max_number_of_prefixes": 2000,
+                    "restart_threshold": 75,
+                    "restart_interval": 30,
+                }],
+            }],
+            ipv6_neighbors=[{
+                "address": "2001::1",
+                "description": "neighbor2",
+                "shutdown": False,
+                "remote_as": 200,
+                "local_as": 200,
+                "keepalive_time": 180,
+                "hold_time": 60,
+                "update_source_interface": "Loopback1",
+                "next_hop_self": True,
+                "send_community": True,
+                "send_extended_community": True,
+                "ebgp_multihop": 3,
+                "password": "myPassword",
+                "as_override": True,
+                "allowas_in_number": 3,
+                "address_families": [{
+                    "family_type": "ipv6-unicast",
+                    "max_number_of_prefixes": 2000,
+                    "threshold": 75,
+                    "policy_type": "restart",
+                    "restart_interval": 30,
+                }],
+            }],
+            ipv4_aggregate_addresses=[{
+                "network_address": "10.10.0.0",
+                "subnet_mask": "255.255.0.0",
+                "as_set_path": False,
+                "summary_only": False,
+            }],
+            ipv4_networks=[{
+                "network_address": "10.10.0.0",
+                "subnet_mask": "255.255.0.0",
+            }],
+            ipv4_eibgp_maximum_paths=1,
+            ipv4_originate=False,
+            ipv4_table_map_filter=False,
+            ipv6_aggregate_addresses=[{
+                "aggregate_prefix": "3001::1/128",
+                "as_set_path": False,
+                "summary_only": False,
+            }],
+            ipv6_networks=[{
+                "network_prefix": "2001:0DB8:0000:000b::/64",
+            }],
+            ipv6_eibgp_maximum_paths=2,
+            ipv6_originate=True,
+            ipv6_table_map_filter=False)
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:
@@ -1986,6 +2083,103 @@ class ServiceRoutingBgpFeature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingBgpFeature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            as_number=429,
+            router_id="1.2.3.4",
+            propagate_as_path=False,
+            propagate_community=False,
+            external_routes_distance=20,
+            internal_routes_distance=200,
+            local_routes_distance=20,
+            keepalive_time=60,
+            hold_time=180,
+            always_compare_med=False,
+            deterministic_med=False,
+            missing_med_as_worst=False,
+            compare_router_id=False,
+            multipath_relax=False,
+            ipv4_neighbors=[{
+                "address": "1.2.3.4",
+                "description": "neighbor1",
+                "shutdown": False,
+                "remote_as": 200,
+                "local_as": 200,
+                "keepalive_time": 40,
+                "hold_time": 200,
+                "update_source_interface": "GigabitEthernet0",
+                "next_hop_self": False,
+                "send_community": True,
+                "send_extended_community": True,
+                "ebgp_multihop": 1,
+                "password": "myPassword",
+                "send_label": True,
+                "as_override": False,
+                "allowas_in_number": 1,
+                "address_families": [{
+                    "family_type": "ipv4-unicast",
+                    "policy_type": "restart",
+                    "restart_max_number_of_prefixes": 2000,
+                    "restart_threshold": 75,
+                    "restart_interval": 30,
+                }],
+            }],
+            ipv6_neighbors=[{
+                "address": "2001::1",
+                "description": "neighbor2",
+                "shutdown": False,
+                "remote_as": 200,
+                "local_as": 200,
+                "keepalive_time": 180,
+                "hold_time": 60,
+                "update_source_interface": "Loopback1",
+                "next_hop_self": True,
+                "send_community": True,
+                "send_extended_community": True,
+                "ebgp_multihop": 3,
+                "password": "myPassword",
+                "as_override": True,
+                "allowas_in_number": 3,
+                "address_families": [{
+                    "family_type": "ipv6-unicast",
+                    "max_number_of_prefixes": 2000,
+                    "threshold": 75,
+                    "policy_type": "restart",
+                    "restart_interval": 30,
+                }],
+            }],
+            ipv4_aggregate_addresses=[{
+                "network_address": "10.10.0.0",
+                "subnet_mask": "255.255.0.0",
+                "as_set_path": False,
+                "summary_only": False,
+            }],
+            ipv4_networks=[{
+                "network_address": "10.10.0.0",
+                "subnet_mask": "255.255.0.0",
+            }],
+            ipv4_eibgp_maximum_paths=1,
+            ipv4_originate=False,
+            ipv4_table_map_filter=False,
+            ipv6_aggregate_addresses=[{
+                "aggregate_prefix": "3001::1/128",
+                "as_set_path": False,
+                "summary_only": False,
+            }],
+            ipv6_networks=[{
+                "network_prefix": "2001:0DB8:0000:000b::/64",
+            }],
+            ipv6_eibgp_maximum_paths=2,
+            ipv6_originate=True,
+            ipv6_table_map_filter=False)
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:

pulumi_sdwan/service_routing_eigrp_feature.py

@@ -741,6 +741,37 @@ class ServiceRoutingEigrpFeature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingEigrpFeature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            autonomous_system_id=111,
+            networks=[{
+                "ip_address": "100.2.2.3",
+                "mask": "255.255.255.0",
+            }],
+            hello_interval=5,
+            hold_time=15,
+            authentication_type="md5",
+            md5_keys=[{
+                "key_id": 2,
+                "key_string": "password123",
+            }],
+            interfaces=[{
+                "name": "GigabitEthernet3",
+                "shutdown": False,
+                "summary_addresses": [{
+                    "address": "10.0.0.1",
+                    "mask": "255.255.255.0",
+                }],
+            }],
+            filter=False)
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:
@@ -792,6 +823,37 @@ class ServiceRoutingEigrpFeature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingEigrpFeature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            autonomous_system_id=111,
+            networks=[{
+                "ip_address": "100.2.2.3",
+                "mask": "255.255.255.0",
+            }],
+            hello_interval=5,
+            hold_time=15,
+            authentication_type="md5",
+            md5_keys=[{
+                "key_id": 2,
+                "key_string": "password123",
+            }],
+            interfaces=[{
+                "name": "GigabitEthernet3",
+                "shutdown": False,
+                "summary_addresses": [{
+                    "address": "10.0.0.1",
+                    "mask": "255.255.255.0",
+                }],
+            }],
+            filter=False)
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:

pulumi_sdwan/service_routing_ospf_feature.py

@@ -1186,6 +1186,61 @@ class ServiceRoutingOspfFeature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingOspfFeature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            router_id="1.2.3.4",
+            reference_bandwidth=101,
+            rfc1583_compatible=True,
+            default_information_originate=False,
+            default_information_originate_always=False,
+            default_information_originate_metric=1,
+            default_information_originate_metric_type="type1",
+            distance_external=110,
+            distance_inter_area=110,
+            distance_intra_area=110,
+            spf_calculation_delay=200,
+            spf_initial_hold_time=1000,
+            spf_maximum_hold_time=10000,
+            redistributes=[{
+                "protocol": "static",
+                "nat_dia": True,
+            }],
+            router_lsas=[{
+                "type": "on-startup",
+                "time": 5,
+            }],
+            areas=[{
+                "area_number": 1,
+                "area_type": "stub",
+                "no_summary": False,
+                "interfaces": [{
+                    "name": "GigabitEthernet2",
+                    "hello_interval": 10,
+                    "dead_interval": 40,
+                    "lsa_retransmit_interval": 5,
+                    "cost": 10,
+                    "designated_router_priority": 1,
+                    "network_type": "broadcast",
+                    "passive_interface": False,
+                    "authentication_type": "message-digest",
+                    "message_digest_key_id": 7,
+                    "message_digest_key": "sdjfhsghbjdjr",
+                }],
+                "ranges": [{
+                    "ip_address": "10.1.1.0",
+                    "subnet_mask": "255.255.255.0",
+                    "cost": 1,
+                    "no_advertise": False,
+                }],
+            }])
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:
@@ -1261,6 +1316,61 @@ class ServiceRoutingOspfFeature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingOspfFeature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            router_id="1.2.3.4",
+            reference_bandwidth=101,
+            rfc1583_compatible=True,
+            default_information_originate=False,
+            default_information_originate_always=False,
+            default_information_originate_metric=1,
+            default_information_originate_metric_type="type1",
+            distance_external=110,
+            distance_inter_area=110,
+            distance_intra_area=110,
+            spf_calculation_delay=200,
+            spf_initial_hold_time=1000,
+            spf_maximum_hold_time=10000,
+            redistributes=[{
+                "protocol": "static",
+                "nat_dia": True,
+            }],
+            router_lsas=[{
+                "type": "on-startup",
+                "time": 5,
+            }],
+            areas=[{
+                "area_number": 1,
+                "area_type": "stub",
+                "no_summary": False,
+                "interfaces": [{
+                    "name": "GigabitEthernet2",
+                    "hello_interval": 10,
+                    "dead_interval": 40,
+                    "lsa_retransmit_interval": 5,
+                    "cost": 10,
+                    "designated_router_priority": 1,
+                    "network_type": "broadcast",
+                    "passive_interface": False,
+                    "authentication_type": "message-digest",
+                    "message_digest_key_id": 7,
+                    "message_digest_key": "sdjfhsghbjdjr",
+                }],
+                "ranges": [{
+                    "ip_address": "10.1.1.0",
+                    "subnet_mask": "255.255.255.0",
+                    "cost": 1,
+                    "no_advertise": False,
+                }],
+            }])
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:

pulumi_sdwan/service_routing_ospfv3_ipv4_feature.py

@@ -1392,6 +1392,57 @@ class ServiceRoutingOspfv3Ipv4Feature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingOspfv3Ipv4Feature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            router_id="1.2.3.4",
+            distance=110,
+            distance_external=110,
+            distance_inter_area=110,
+            distance_intra_area=110,
+            reference_bandwidth=101,
+            rfc1583_compatible=True,
+            default_information_originate=False,
+            default_information_originate_always=False,
+            default_information_originate_metric=1,
+            default_information_originate_metric_type="type1",
+            spf_calculation_delay=200,
+            spf_initial_hold_time=1000,
+            spf_maximum_hold_time=10000,
+            filter=False,
+            redistributes=[{
+                "protocol": "nat-route",
+                "nat_dia": True,
+            }],
+            router_lsa_action="on-startup",
+            router_lsa_on_startup_time=30,
+            areas=[{
+                "area_number": 1,
+                "area_type": "stub",
+                "interfaces": [{
+                    "name": "GigabitEthernet2",
+                    "hello_interval": 10,
+                    "dead_interval": 40,
+                    "lsa_retransmit_interval": 5,
+                    "cost": 10,
+                    "network_type": "broadcast",
+                    "passive_interface": False,
+                    "authentication_type": "no-auth",
+                }],
+                "ranges": [{
+                    "ip_address": "10.1.1.0",
+                    "subnet_mask": "255.255.255.0",
+                    "cost": 1,
+                    "no_advertise": False,
+                }],
+            }])
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:
@@ -1475,6 +1526,57 @@ class ServiceRoutingOspfv3Ipv4Feature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingOspfv3Ipv4Feature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            router_id="1.2.3.4",
+            distance=110,
+            distance_external=110,
+            distance_inter_area=110,
+            distance_intra_area=110,
+            reference_bandwidth=101,
+            rfc1583_compatible=True,
+            default_information_originate=False,
+            default_information_originate_always=False,
+            default_information_originate_metric=1,
+            default_information_originate_metric_type="type1",
+            spf_calculation_delay=200,
+            spf_initial_hold_time=1000,
+            spf_maximum_hold_time=10000,
+            filter=False,
+            redistributes=[{
+                "protocol": "nat-route",
+                "nat_dia": True,
+            }],
+            router_lsa_action="on-startup",
+            router_lsa_on_startup_time=30,
+            areas=[{
+                "area_number": 1,
+                "area_type": "stub",
+                "interfaces": [{
+                    "name": "GigabitEthernet2",
+                    "hello_interval": 10,
+                    "dead_interval": 40,
+                    "lsa_retransmit_interval": 5,
+                    "cost": 10,
+                    "network_type": "broadcast",
+                    "passive_interface": False,
+                    "authentication_type": "no-auth",
+                }],
+                "ranges": [{
+                    "ip_address": "10.1.1.0",
+                    "subnet_mask": "255.255.255.0",
+                    "cost": 1,
+                    "no_advertise": False,
+                }],
+            }])
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:

pulumi_sdwan/service_routing_ospfv3_ipv6_feature.py

@@ -1392,6 +1392,55 @@ class ServiceRoutingOspfv3Ipv6Feature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingOspfv3Ipv6Feature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            router_id="1.2.3.4",
+            distance=110,
+            distance_external=110,
+            distance_inter_area=110,
+            distance_intra_area=110,
+            reference_bandwidth=101,
+            rfc1583_compatible=True,
+            default_information_originate=False,
+            default_information_originate_always=False,
+            default_information_originate_metric=1,
+            default_information_originate_metric_type="type1",
+            spf_calculation_delay=200,
+            spf_initial_hold_time=1000,
+            spf_maximum_hold_time=10000,
+            filter=False,
+            redistributes=[{
+                "protocol": "static",
+            }],
+            router_lsa_action="on-startup",
+            router_lsa_on_startup_time=30,
+            areas=[{
+                "area_number": 1,
+                "area_type": "stub",
+                "interfaces": [{
+                    "name": "GigabitEthernet2",
+                    "hello_interval": 10,
+                    "dead_interval": 40,
+                    "lsa_retransmit_interval": 5,
+                    "cost": 10,
+                    "network_type": "broadcast",
+                    "passive_interface": False,
+                    "authentication_type": "no-auth",
+                }],
+                "ranges": [{
+                    "prefix": "3002::/96",
+                    "cost": 1,
+                    "no_advertise": False,
+                }],
+            }])
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example:
@@ -1475,6 +1524,55 @@ class ServiceRoutingOspfv3Ipv6Feature(pulumi.CustomResource):
 
         ## Example Usage
 
+        ```python
+        import pulumi
+        import pulumi_sdwan as sdwan
+
+        example = sdwan.ServiceRoutingOspfv3Ipv6Feature("example",
+            name="Example",
+            description="My Example",
+            feature_profile_id="f6dd22c8-0b4f-496c-9a0b-6813d1f8b8ac",
+            router_id="1.2.3.4",
+            distance=110,
+            distance_external=110,
+            distance_inter_area=110,
+            distance_intra_area=110,
+            reference_bandwidth=101,
+            rfc1583_compatible=True,
+            default_information_originate=False,
+            default_information_originate_always=False,
+            default_information_originate_metric=1,
+            default_information_originate_metric_type="type1",
+            spf_calculation_delay=200,
+            spf_initial_hold_time=1000,
+            spf_maximum_hold_time=10000,
+            filter=False,
+            redistributes=[{
+                "protocol": "static",
+            }],
+            router_lsa_action="on-startup",
+            router_lsa_on_startup_time=30,
+            areas=[{
+                "area_number": 1,
+                "area_type": "stub",
+                "interfaces": [{
+                    "name": "GigabitEthernet2",
+                    "hello_interval": 10,
+                    "dead_interval": 40,
+                    "lsa_retransmit_interval": 5,
+                    "cost": 10,
+                    "network_type": "broadcast",
+                    "passive_interface": False,
+                    "authentication_type": "no-auth",
+                }],
+                "ranges": [{
+                    "prefix": "3002::/96",
+                    "cost": 1,
+                    "no_advertise": False,
+                }],
+            }])
+        ```
+
         ## Import
 
         The `pulumi import` command can be used, for example: