pulumi-kubernetes 4.23.0a1743519894__py3-none-any.whl → 4.23.0a1743595894__py3-none-any.whl

pulumi_kubernetes/autoscaling/v2/_inputs.py

@@ -2,6 +2,7 @@
 # *** WARNING: this file was generated by pulumigen. ***
 # *** Do not edit by hand unless you're certain you know what you are doing! ***
 
+import builtins
 import copy
 import warnings
 import sys
@@ -97,11 +98,11 @@ if not MYPY:
         """
         ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
         """
-        container: NotRequired[pulumi.Input[str]]
+        container: NotRequired[pulumi.Input[builtins.str]]
         """
         container is the name of the container in the pods of the scaling target
         """
-        name: NotRequired[pulumi.Input[str]]
+        name: NotRequired[pulumi.Input[builtins.str]]
         """
         name is the name of the resource in question.
         """
@@ -115,13 +116,13 @@ elif False:
 @pulumi.input_type
 class ContainerResourceMetricSourcePatchArgs:
     def __init__(__self__, *,
-                 container: Optional[pulumi.Input[str]] = None,
-                 name: Optional[pulumi.Input[str]] = None,
+                 container: Optional[pulumi.Input[builtins.str]] = None,
+                 name: Optional[pulumi.Input[builtins.str]] = None,
                  target: Optional[pulumi.Input['MetricTargetPatchArgs']] = None):
         """
         ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
-        :param pulumi.Input[str] container: container is the name of the container in the pods of the scaling target
-        :param pulumi.Input[str] name: name is the name of the resource in question.
+        :param pulumi.Input[builtins.str] container: container is the name of the container in the pods of the scaling target
+        :param pulumi.Input[builtins.str] name: name is the name of the resource in question.
         :param pulumi.Input['MetricTargetPatchArgs'] target: target specifies the target value for the given metric
         """
         if container is not None:
@@ -133,26 +134,26 @@ class ContainerResourceMetricSourcePatchArgs:
 
     @property
     @pulumi.getter
-    def container(self) -> Optional[pulumi.Input[str]]:
+    def container(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         container is the name of the container in the pods of the scaling target
         """
         return pulumi.get(self, "container")
 
     @container.setter
-    def container(self, value: Optional[pulumi.Input[str]]):
+    def container(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "container", value)
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[pulumi.Input[str]]:
+    def name(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         name is the name of the resource in question.
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: Optional[pulumi.Input[str]]):
+    def name(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "name", value)
 
     @property
@@ -173,11 +174,11 @@ if not MYPY:
         """
         ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
         """
-        container: pulumi.Input[str]
+        container: pulumi.Input[builtins.str]
         """
         container is the name of the container in the pods of the scaling target
         """
-        name: pulumi.Input[str]
+        name: pulumi.Input[builtins.str]
         """
         name is the name of the resource in question.
         """
@@ -191,13 +192,13 @@ elif False:
 @pulumi.input_type
 class ContainerResourceMetricSourceArgs:
     def __init__(__self__, *,
-                 container: pulumi.Input[str],
-                 name: pulumi.Input[str],
+                 container: pulumi.Input[builtins.str],
+                 name: pulumi.Input[builtins.str],
                  target: pulumi.Input['MetricTargetArgs']):
         """
         ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
-        :param pulumi.Input[str] container: container is the name of the container in the pods of the scaling target
-        :param pulumi.Input[str] name: name is the name of the resource in question.
+        :param pulumi.Input[builtins.str] container: container is the name of the container in the pods of the scaling target
+        :param pulumi.Input[builtins.str] name: name is the name of the resource in question.
         :param pulumi.Input['MetricTargetArgs'] target: target specifies the target value for the given metric
         """
         pulumi.set(__self__, "container", container)
@@ -206,26 +207,26 @@ class ContainerResourceMetricSourceArgs:
 
     @property
     @pulumi.getter
-    def container(self) -> pulumi.Input[str]:
+    def container(self) -> pulumi.Input[builtins.str]:
         """
         container is the name of the container in the pods of the scaling target
         """
         return pulumi.get(self, "container")
 
     @container.setter
-    def container(self, value: pulumi.Input[str]):
+    def container(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "container", value)
 
     @property
     @pulumi.getter
-    def name(self) -> pulumi.Input[str]:
+    def name(self) -> pulumi.Input[builtins.str]:
         """
         name is the name of the resource in question.
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: pulumi.Input[str]):
+    def name(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "name", value)
 
     @property
@@ -246,7 +247,7 @@ if not MYPY:
         """
         ContainerResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing a single container in each pod in the current scale target (e.g. CPU or memory).  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
         """
-        container: pulumi.Input[str]
+        container: pulumi.Input[builtins.str]
         """
         container is the name of the container in the pods of the scaling target
         """
@@ -254,7 +255,7 @@ if not MYPY:
         """
         current contains the current value for the given metric
         """
-        name: pulumi.Input[str]
+        name: pulumi.Input[builtins.str]
         """
         name is the name of the resource in question.
         """
@@ -264,14 +265,14 @@ elif False:
 @pulumi.input_type
 class ContainerResourceMetricStatusArgs:
     def __init__(__self__, *,
-                 container: pulumi.Input[str],
+                 container: pulumi.Input[builtins.str],
                  current: pulumi.Input['MetricValueStatusArgs'],
-                 name: pulumi.Input[str]):
+                 name: pulumi.Input[builtins.str]):
         """
         ContainerResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing a single container in each pod in the current scale target (e.g. CPU or memory).  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
-        :param pulumi.Input[str] container: container is the name of the container in the pods of the scaling target
+        :param pulumi.Input[builtins.str] container: container is the name of the container in the pods of the scaling target
         :param pulumi.Input['MetricValueStatusArgs'] current: current contains the current value for the given metric
-        :param pulumi.Input[str] name: name is the name of the resource in question.
+        :param pulumi.Input[builtins.str] name: name is the name of the resource in question.
         """
         pulumi.set(__self__, "container", container)
         pulumi.set(__self__, "current", current)
@@ -279,14 +280,14 @@ class ContainerResourceMetricStatusArgs:
 
     @property
     @pulumi.getter
-    def container(self) -> pulumi.Input[str]:
+    def container(self) -> pulumi.Input[builtins.str]:
         """
         container is the name of the container in the pods of the scaling target
         """
         return pulumi.get(self, "container")
 
     @container.setter
-    def container(self, value: pulumi.Input[str]):
+    def container(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "container", value)
 
     @property
@@ -303,14 +304,14 @@ class ContainerResourceMetricStatusArgs:
 
     @property
     @pulumi.getter
-    def name(self) -> pulumi.Input[str]:
+    def name(self) -> pulumi.Input[builtins.str]:
         """
         name is the name of the resource in question.
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: pulumi.Input[str]):
+    def name(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "name", value)
 
 
@@ -319,15 +320,15 @@ if not MYPY:
         """
         CrossVersionObjectReference contains enough information to let you identify the referred resource.
         """
-        api_version: NotRequired[pulumi.Input[str]]
+        api_version: NotRequired[pulumi.Input[builtins.str]]
         """
         apiVersion is the API version of the referent
         """
-        kind: NotRequired[pulumi.Input[str]]
+        kind: NotRequired[pulumi.Input[builtins.str]]
         """
         kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
-        name: NotRequired[pulumi.Input[str]]
+        name: NotRequired[pulumi.Input[builtins.str]]
         """
         name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
         """
@@ -337,14 +338,14 @@ elif False:
 @pulumi.input_type
 class CrossVersionObjectReferencePatchArgs:
     def __init__(__self__, *,
-                 api_version: Optional[pulumi.Input[str]] = None,
-                 kind: Optional[pulumi.Input[str]] = None,
-                 name: Optional[pulumi.Input[str]] = None):
+                 api_version: Optional[pulumi.Input[builtins.str]] = None,
+                 kind: Optional[pulumi.Input[builtins.str]] = None,
+                 name: Optional[pulumi.Input[builtins.str]] = None):
         """
         CrossVersionObjectReference contains enough information to let you identify the referred resource.
-        :param pulumi.Input[str] api_version: apiVersion is the API version of the referent
-        :param pulumi.Input[str] kind: kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
-        :param pulumi.Input[str] name: name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+        :param pulumi.Input[builtins.str] api_version: apiVersion is the API version of the referent
+        :param pulumi.Input[builtins.str] kind: kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param pulumi.Input[builtins.str] name: name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
         """
         if api_version is not None:
             pulumi.set(__self__, "api_version", api_version)
@@ -355,38 +356,38 @@ class CrossVersionObjectReferencePatchArgs:
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[pulumi.Input[str]]:
+    def api_version(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         apiVersion is the API version of the referent
         """
         return pulumi.get(self, "api_version")
 
     @api_version.setter
-    def api_version(self, value: Optional[pulumi.Input[str]]):
+    def api_version(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "api_version", value)
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[pulumi.Input[str]]:
+    def kind(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
     @kind.setter
-    def kind(self, value: Optional[pulumi.Input[str]]):
+    def kind(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "kind", value)
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[pulumi.Input[str]]:
+    def name(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: Optional[pulumi.Input[str]]):
+    def name(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "name", value)
 
 
@@ -395,15 +396,15 @@ if not MYPY:
         """
         CrossVersionObjectReference contains enough information to let you identify the referred resource.
         """
-        kind: pulumi.Input[str]
+        kind: pulumi.Input[builtins.str]
         """
         kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
-        name: pulumi.Input[str]
+        name: pulumi.Input[builtins.str]
         """
         name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
         """
-        api_version: NotRequired[pulumi.Input[str]]
+        api_version: NotRequired[pulumi.Input[builtins.str]]
         """
         apiVersion is the API version of the referent
         """
@@ -413,14 +414,14 @@ elif False:
 @pulumi.input_type
 class CrossVersionObjectReferenceArgs:
     def __init__(__self__, *,
-                 kind: pulumi.Input[str],
-                 name: pulumi.Input[str],
-                 api_version: Optional[pulumi.Input[str]] = None):
+                 kind: pulumi.Input[builtins.str],
+                 name: pulumi.Input[builtins.str],
+                 api_version: Optional[pulumi.Input[builtins.str]] = None):
         """
         CrossVersionObjectReference contains enough information to let you identify the referred resource.
-        :param pulumi.Input[str] kind: kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
-        :param pulumi.Input[str] name: name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
-        :param pulumi.Input[str] api_version: apiVersion is the API version of the referent
+        :param pulumi.Input[builtins.str] kind: kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param pulumi.Input[builtins.str] name: name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+        :param pulumi.Input[builtins.str] api_version: apiVersion is the API version of the referent
         """
         pulumi.set(__self__, "kind", kind)
         pulumi.set(__self__, "name", name)
@@ -429,38 +430,38 @@ class CrossVersionObjectReferenceArgs:
 
     @property
     @pulumi.getter
-    def kind(self) -> pulumi.Input[str]:
+    def kind(self) -> pulumi.Input[builtins.str]:
         """
         kind is the kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
     @kind.setter
-    def kind(self, value: pulumi.Input[str]):
+    def kind(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "kind", value)
 
     @property
     @pulumi.getter
-    def name(self) -> pulumi.Input[str]:
+    def name(self) -> pulumi.Input[builtins.str]:
         """
         name is the name of the referent; More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: pulumi.Input[str]):
+    def name(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "name", value)
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[pulumi.Input[str]]:
+    def api_version(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         apiVersion is the API version of the referent
         """
         return pulumi.get(self, "api_version")
 
     @api_version.setter
-    def api_version(self, value: Optional[pulumi.Input[str]]):
+    def api_version(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "api_version", value)
 
 
@@ -633,15 +634,15 @@ if not MYPY:
         """
         HPAScalingPolicy is a single policy which must hold true for a specified past interval.
         """
-        period_seconds: NotRequired[pulumi.Input[int]]
+        period_seconds: NotRequired[pulumi.Input[builtins.int]]
         """
         periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
         """
-        type: NotRequired[pulumi.Input[str]]
+        type: NotRequired[pulumi.Input[builtins.str]]
         """
         type is used to specify the scaling policy.
         """
-        value: NotRequired[pulumi.Input[int]]
+        value: NotRequired[pulumi.Input[builtins.int]]
         """
         value contains the amount of change which is permitted by the policy. It must be greater than zero
         """
@@ -651,14 +652,14 @@ elif False:
 @pulumi.input_type
 class HPAScalingPolicyPatchArgs:
     def __init__(__self__, *,
-                 period_seconds: Optional[pulumi.Input[int]] = None,
-                 type: Optional[pulumi.Input[str]] = None,
-                 value: Optional[pulumi.Input[int]] = None):
+                 period_seconds: Optional[pulumi.Input[builtins.int]] = None,
+                 type: Optional[pulumi.Input[builtins.str]] = None,
+                 value: Optional[pulumi.Input[builtins.int]] = None):
         """
         HPAScalingPolicy is a single policy which must hold true for a specified past interval.
-        :param pulumi.Input[int] period_seconds: periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
-        :param pulumi.Input[str] type: type is used to specify the scaling policy.
-        :param pulumi.Input[int] value: value contains the amount of change which is permitted by the policy. It must be greater than zero
+        :param pulumi.Input[builtins.int] period_seconds: periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
+        :param pulumi.Input[builtins.str] type: type is used to specify the scaling policy.
+        :param pulumi.Input[builtins.int] value: value contains the amount of change which is permitted by the policy. It must be greater than zero
         """
         if period_seconds is not None:
             pulumi.set(__self__, "period_seconds", period_seconds)
@@ -669,38 +670,38 @@ class HPAScalingPolicyPatchArgs:
 
     @property
     @pulumi.getter(name="periodSeconds")
-    def period_seconds(self) -> Optional[pulumi.Input[int]]:
+    def period_seconds(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
         """
         return pulumi.get(self, "period_seconds")
 
     @period_seconds.setter
-    def period_seconds(self, value: Optional[pulumi.Input[int]]):
+    def period_seconds(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "period_seconds", value)
 
     @property
     @pulumi.getter
-    def type(self) -> Optional[pulumi.Input[str]]:
+    def type(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         type is used to specify the scaling policy.
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: Optional[pulumi.Input[str]]):
+    def type(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "type", value)
 
     @property
     @pulumi.getter
-    def value(self) -> Optional[pulumi.Input[int]]:
+    def value(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         value contains the amount of change which is permitted by the policy. It must be greater than zero
         """
         return pulumi.get(self, "value")
 
     @value.setter
-    def value(self, value: Optional[pulumi.Input[int]]):
+    def value(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "value", value)
 
 
@@ -709,15 +710,15 @@ if not MYPY:
         """
         HPAScalingPolicy is a single policy which must hold true for a specified past interval.
         """
-        period_seconds: pulumi.Input[int]
+        period_seconds: pulumi.Input[builtins.int]
         """
         periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
         """
-        type: pulumi.Input[str]
+        type: pulumi.Input[builtins.str]
         """
         type is used to specify the scaling policy.
         """
-        value: pulumi.Input[int]
+        value: pulumi.Input[builtins.int]
         """
         value contains the amount of change which is permitted by the policy. It must be greater than zero
         """
@@ -727,14 +728,14 @@ elif False:
 @pulumi.input_type
 class HPAScalingPolicyArgs:
     def __init__(__self__, *,
-                 period_seconds: pulumi.Input[int],
-                 type: pulumi.Input[str],
-                 value: pulumi.Input[int]):
+                 period_seconds: pulumi.Input[builtins.int],
+                 type: pulumi.Input[builtins.str],
+                 value: pulumi.Input[builtins.int]):
         """
         HPAScalingPolicy is a single policy which must hold true for a specified past interval.
-        :param pulumi.Input[int] period_seconds: periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
-        :param pulumi.Input[str] type: type is used to specify the scaling policy.
-        :param pulumi.Input[int] value: value contains the amount of change which is permitted by the policy. It must be greater than zero
+        :param pulumi.Input[builtins.int] period_seconds: periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
+        :param pulumi.Input[builtins.str] type: type is used to specify the scaling policy.
+        :param pulumi.Input[builtins.int] value: value contains the amount of change which is permitted by the policy. It must be greater than zero
         """
         pulumi.set(__self__, "period_seconds", period_seconds)
         pulumi.set(__self__, "type", type)
@@ -742,38 +743,38 @@ class HPAScalingPolicyArgs:
 
     @property
     @pulumi.getter(name="periodSeconds")
-    def period_seconds(self) -> pulumi.Input[int]:
+    def period_seconds(self) -> pulumi.Input[builtins.int]:
         """
         periodSeconds specifies the window of time for which the policy should hold true. PeriodSeconds must be greater than zero and less than or equal to 1800 (30 min).
         """
         return pulumi.get(self, "period_seconds")
 
     @period_seconds.setter
-    def period_seconds(self, value: pulumi.Input[int]):
+    def period_seconds(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "period_seconds", value)
 
     @property
     @pulumi.getter
-    def type(self) -> pulumi.Input[str]:
+    def type(self) -> pulumi.Input[builtins.str]:
         """
         type is used to specify the scaling policy.
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: pulumi.Input[str]):
+    def type(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "type", value)
 
     @property
     @pulumi.getter
-    def value(self) -> pulumi.Input[int]:
+    def value(self) -> pulumi.Input[builtins.int]:
         """
         value contains the amount of change which is permitted by the policy. It must be greater than zero
         """
         return pulumi.get(self, "value")
 
     @value.setter
-    def value(self, value: pulumi.Input[int]):
+    def value(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "value", value)
 
 
@@ -786,11 +787,11 @@ if not MYPY:
         """
         policies is a list of potential scaling polices which can be used during scaling. At least one policy must be specified, otherwise the HPAScalingRules will be discarded as invalid
         """
-        select_policy: NotRequired[pulumi.Input[str]]
+        select_policy: NotRequired[pulumi.Input[builtins.str]]
         """
         selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
         """
-        stabilization_window_seconds: NotRequired[pulumi.Input[int]]
+        stabilization_window_seconds: NotRequired[pulumi.Input[builtins.int]]
         """
         stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
         """
@@ -801,13 +802,13 @@ elif False:
 class HPAScalingRulesPatchArgs:
     def __init__(__self__, *,
                  policies: Optional[pulumi.Input[Sequence[pulumi.Input['HPAScalingPolicyPatchArgs']]]] = None,
-                 select_policy: Optional[pulumi.Input[str]] = None,
-                 stabilization_window_seconds: Optional[pulumi.Input[int]] = None):
+                 select_policy: Optional[pulumi.Input[builtins.str]] = None,
+                 stabilization_window_seconds: Optional[pulumi.Input[builtins.int]] = None):
         """
         HPAScalingRules configures the scaling behavior for one direction. These Rules are applied after calculating DesiredReplicas from metrics for the HPA. They can limit the scaling velocity by specifying scaling policies. They can prevent flapping by specifying the stabilization window, so that the number of replicas is not set instantly, instead, the safest value from the stabilization window is chosen.
         :param pulumi.Input[Sequence[pulumi.Input['HPAScalingPolicyPatchArgs']]] policies: policies is a list of potential scaling polices which can be used during scaling. At least one policy must be specified, otherwise the HPAScalingRules will be discarded as invalid
-        :param pulumi.Input[str] select_policy: selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
-        :param pulumi.Input[int] stabilization_window_seconds: stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
+        :param pulumi.Input[builtins.str] select_policy: selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
+        :param pulumi.Input[builtins.int] stabilization_window_seconds: stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
         """
         if policies is not None:
             pulumi.set(__self__, "policies", policies)
@@ -830,26 +831,26 @@ class HPAScalingRulesPatchArgs:
 
     @property
     @pulumi.getter(name="selectPolicy")
-    def select_policy(self) -> Optional[pulumi.Input[str]]:
+    def select_policy(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
         """
         return pulumi.get(self, "select_policy")
 
     @select_policy.setter
-    def select_policy(self, value: Optional[pulumi.Input[str]]):
+    def select_policy(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "select_policy", value)
 
     @property
     @pulumi.getter(name="stabilizationWindowSeconds")
-    def stabilization_window_seconds(self) -> Optional[pulumi.Input[int]]:
+    def stabilization_window_seconds(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
         """
         return pulumi.get(self, "stabilization_window_seconds")
 
     @stabilization_window_seconds.setter
-    def stabilization_window_seconds(self, value: Optional[pulumi.Input[int]]):
+    def stabilization_window_seconds(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "stabilization_window_seconds", value)
 
 
@@ -862,11 +863,11 @@ if not MYPY:
         """
         policies is a list of potential scaling polices which can be used during scaling. At least one policy must be specified, otherwise the HPAScalingRules will be discarded as invalid
         """
-        select_policy: NotRequired[pulumi.Input[str]]
+        select_policy: NotRequired[pulumi.Input[builtins.str]]
         """
         selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
         """
-        stabilization_window_seconds: NotRequired[pulumi.Input[int]]
+        stabilization_window_seconds: NotRequired[pulumi.Input[builtins.int]]
         """
         stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
         """
@@ -877,13 +878,13 @@ elif False:
 class HPAScalingRulesArgs:
     def __init__(__self__, *,
                  policies: Optional[pulumi.Input[Sequence[pulumi.Input['HPAScalingPolicyArgs']]]] = None,
-                 select_policy: Optional[pulumi.Input[str]] = None,
-                 stabilization_window_seconds: Optional[pulumi.Input[int]] = None):
+                 select_policy: Optional[pulumi.Input[builtins.str]] = None,
+                 stabilization_window_seconds: Optional[pulumi.Input[builtins.int]] = None):
         """
         HPAScalingRules configures the scaling behavior for one direction. These Rules are applied after calculating DesiredReplicas from metrics for the HPA. They can limit the scaling velocity by specifying scaling policies. They can prevent flapping by specifying the stabilization window, so that the number of replicas is not set instantly, instead, the safest value from the stabilization window is chosen.
         :param pulumi.Input[Sequence[pulumi.Input['HPAScalingPolicyArgs']]] policies: policies is a list of potential scaling polices which can be used during scaling. At least one policy must be specified, otherwise the HPAScalingRules will be discarded as invalid
-        :param pulumi.Input[str] select_policy: selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
-        :param pulumi.Input[int] stabilization_window_seconds: stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
+        :param pulumi.Input[builtins.str] select_policy: selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
+        :param pulumi.Input[builtins.int] stabilization_window_seconds: stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
         """
         if policies is not None:
             pulumi.set(__self__, "policies", policies)
@@ -906,26 +907,26 @@ class HPAScalingRulesArgs:
 
     @property
     @pulumi.getter(name="selectPolicy")
-    def select_policy(self) -> Optional[pulumi.Input[str]]:
+    def select_policy(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         selectPolicy is used to specify which policy should be used. If not set, the default value Max is used.
         """
         return pulumi.get(self, "select_policy")
 
     @select_policy.setter
-    def select_policy(self, value: Optional[pulumi.Input[str]]):
+    def select_policy(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "select_policy", value)
 
     @property
     @pulumi.getter(name="stabilizationWindowSeconds")
-    def stabilization_window_seconds(self) -> Optional[pulumi.Input[int]]:
+    def stabilization_window_seconds(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).
         """
         return pulumi.get(self, "stabilization_window_seconds")
 
     @stabilization_window_seconds.setter
-    def stabilization_window_seconds(self, value: Optional[pulumi.Input[int]]):
+    def stabilization_window_seconds(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "stabilization_window_seconds", value)
 
 
@@ -1064,23 +1065,23 @@ if not MYPY:
         """
         HorizontalPodAutoscalerCondition describes the state of a HorizontalPodAutoscaler at a certain point.
         """
-        status: pulumi.Input[str]
+        status: pulumi.Input[builtins.str]
         """
         status is the status of the condition (True, False, Unknown)
         """
-        type: pulumi.Input[str]
+        type: pulumi.Input[builtins.str]
         """
         type describes the current condition
         """
-        last_transition_time: NotRequired[pulumi.Input[str]]
+        last_transition_time: NotRequired[pulumi.Input[builtins.str]]
         """
         lastTransitionTime is the last time the condition transitioned from one status to another
         """
-        message: NotRequired[pulumi.Input[str]]
+        message: NotRequired[pulumi.Input[builtins.str]]
         """
         message is a human-readable explanation containing details about the transition
         """
-        reason: NotRequired[pulumi.Input[str]]
+        reason: NotRequired[pulumi.Input[builtins.str]]
         """
         reason is the reason for the condition's last transition.
         """
@@ -1090,18 +1091,18 @@ elif False:
 @pulumi.input_type
 class HorizontalPodAutoscalerConditionArgs:
     def __init__(__self__, *,
-                 status: pulumi.Input[str],
-                 type: pulumi.Input[str],
-                 last_transition_time: Optional[pulumi.Input[str]] = None,
-                 message: Optional[pulumi.Input[str]] = None,
-                 reason: Optional[pulumi.Input[str]] = None):
+                 status: pulumi.Input[builtins.str],
+                 type: pulumi.Input[builtins.str],
+                 last_transition_time: Optional[pulumi.Input[builtins.str]] = None,
+                 message: Optional[pulumi.Input[builtins.str]] = None,
+                 reason: Optional[pulumi.Input[builtins.str]] = None):
         """
         HorizontalPodAutoscalerCondition describes the state of a HorizontalPodAutoscaler at a certain point.
-        :param pulumi.Input[str] status: status is the status of the condition (True, False, Unknown)
-        :param pulumi.Input[str] type: type describes the current condition
-        :param pulumi.Input[str] last_transition_time: lastTransitionTime is the last time the condition transitioned from one status to another
-        :param pulumi.Input[str] message: message is a human-readable explanation containing details about the transition
-        :param pulumi.Input[str] reason: reason is the reason for the condition's last transition.
+        :param pulumi.Input[builtins.str] status: status is the status of the condition (True, False, Unknown)
+        :param pulumi.Input[builtins.str] type: type describes the current condition
+        :param pulumi.Input[builtins.str] last_transition_time: lastTransitionTime is the last time the condition transitioned from one status to another
+        :param pulumi.Input[builtins.str] message: message is a human-readable explanation containing details about the transition
+        :param pulumi.Input[builtins.str] reason: reason is the reason for the condition's last transition.
         """
         pulumi.set(__self__, "status", status)
         pulumi.set(__self__, "type", type)
@@ -1114,62 +1115,62 @@ class HorizontalPodAutoscalerConditionArgs:
 
     @property
     @pulumi.getter
-    def status(self) -> pulumi.Input[str]:
+    def status(self) -> pulumi.Input[builtins.str]:
         """
         status is the status of the condition (True, False, Unknown)
         """
         return pulumi.get(self, "status")
 
     @status.setter
-    def status(self, value: pulumi.Input[str]):
+    def status(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "status", value)
 
     @property
     @pulumi.getter
-    def type(self) -> pulumi.Input[str]:
+    def type(self) -> pulumi.Input[builtins.str]:
         """
         type describes the current condition
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: pulumi.Input[str]):
+    def type(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "type", value)
 
     @property
     @pulumi.getter(name="lastTransitionTime")
-    def last_transition_time(self) -> Optional[pulumi.Input[str]]:
+    def last_transition_time(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         lastTransitionTime is the last time the condition transitioned from one status to another
         """
         return pulumi.get(self, "last_transition_time")
 
     @last_transition_time.setter
-    def last_transition_time(self, value: Optional[pulumi.Input[str]]):
+    def last_transition_time(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "last_transition_time", value)
 
     @property
     @pulumi.getter
-    def message(self) -> Optional[pulumi.Input[str]]:
+    def message(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         message is a human-readable explanation containing details about the transition
         """
         return pulumi.get(self, "message")
 
     @message.setter
-    def message(self, value: Optional[pulumi.Input[str]]):
+    def message(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "message", value)
 
     @property
     @pulumi.getter
-    def reason(self) -> Optional[pulumi.Input[str]]:
+    def reason(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         reason is the reason for the condition's last transition.
         """
         return pulumi.get(self, "reason")
 
     @reason.setter
-    def reason(self, value: Optional[pulumi.Input[str]]):
+    def reason(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "reason", value)
 
 
@@ -1182,7 +1183,7 @@ if not MYPY:
         """
         behavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively). If not set, the default HPAScalingRules for scale up and scale down are used.
         """
-        max_replicas: NotRequired[pulumi.Input[int]]
+        max_replicas: NotRequired[pulumi.Input[builtins.int]]
         """
         maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
         """
@@ -1190,7 +1191,7 @@ if not MYPY:
         """
         metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used).  The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods.  Ergo, metrics used must decrease as the pod count is increased, and vice-versa.  See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.
         """
-        min_replicas: NotRequired[pulumi.Input[int]]
+        min_replicas: NotRequired[pulumi.Input[builtins.int]]
         """
         minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
         """
@@ -1205,16 +1206,16 @@ elif False:
 class HorizontalPodAutoscalerSpecPatchArgs:
     def __init__(__self__, *,
                  behavior: Optional[pulumi.Input['HorizontalPodAutoscalerBehaviorPatchArgs']] = None,
-                 max_replicas: Optional[pulumi.Input[int]] = None,
+                 max_replicas: Optional[pulumi.Input[builtins.int]] = None,
                  metrics: Optional[pulumi.Input[Sequence[pulumi.Input['MetricSpecPatchArgs']]]] = None,
-                 min_replicas: Optional[pulumi.Input[int]] = None,
+                 min_replicas: Optional[pulumi.Input[builtins.int]] = None,
                  scale_target_ref: Optional[pulumi.Input['CrossVersionObjectReferencePatchArgs']] = None):
         """
         HorizontalPodAutoscalerSpec describes the desired functionality of the HorizontalPodAutoscaler.
         :param pulumi.Input['HorizontalPodAutoscalerBehaviorPatchArgs'] behavior: behavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively). If not set, the default HPAScalingRules for scale up and scale down are used.
-        :param pulumi.Input[int] max_replicas: maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
+        :param pulumi.Input[builtins.int] max_replicas: maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
         :param pulumi.Input[Sequence[pulumi.Input['MetricSpecPatchArgs']]] metrics: metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used).  The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods.  Ergo, metrics used must decrease as the pod count is increased, and vice-versa.  See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.
-        :param pulumi.Input[int] min_replicas: minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
+        :param pulumi.Input[builtins.int] min_replicas: minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
         :param pulumi.Input['CrossVersionObjectReferencePatchArgs'] scale_target_ref: scaleTargetRef points to the target resource to scale, and is used to the pods for which metrics should be collected, as well as to actually change the replica count.
         """
         if behavior is not None:
@@ -1242,14 +1243,14 @@ class HorizontalPodAutoscalerSpecPatchArgs:
 
     @property
     @pulumi.getter(name="maxReplicas")
-    def max_replicas(self) -> Optional[pulumi.Input[int]]:
+    def max_replicas(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
         """
         return pulumi.get(self, "max_replicas")
 
     @max_replicas.setter
-    def max_replicas(self, value: Optional[pulumi.Input[int]]):
+    def max_replicas(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "max_replicas", value)
 
     @property
@@ -1266,14 +1267,14 @@ class HorizontalPodAutoscalerSpecPatchArgs:
 
     @property
     @pulumi.getter(name="minReplicas")
-    def min_replicas(self) -> Optional[pulumi.Input[int]]:
+    def min_replicas(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
         """
         return pulumi.get(self, "min_replicas")
 
     @min_replicas.setter
-    def min_replicas(self, value: Optional[pulumi.Input[int]]):
+    def min_replicas(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "min_replicas", value)
 
     @property
@@ -1294,7 +1295,7 @@ if not MYPY:
         """
         HorizontalPodAutoscalerSpec describes the desired functionality of the HorizontalPodAutoscaler.
         """
-        max_replicas: pulumi.Input[int]
+        max_replicas: pulumi.Input[builtins.int]
         """
         maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
         """
@@ -1310,7 +1311,7 @@ if not MYPY:
         """
         metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used).  The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods.  Ergo, metrics used must decrease as the pod count is increased, and vice-versa.  See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.
         """
-        min_replicas: NotRequired[pulumi.Input[int]]
+        min_replicas: NotRequired[pulumi.Input[builtins.int]]
         """
         minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
         """
@@ -1320,18 +1321,18 @@ elif False:
 @pulumi.input_type
 class HorizontalPodAutoscalerSpecArgs:
     def __init__(__self__, *,
-                 max_replicas: pulumi.Input[int],
+                 max_replicas: pulumi.Input[builtins.int],
                  scale_target_ref: pulumi.Input['CrossVersionObjectReferenceArgs'],
                  behavior: Optional[pulumi.Input['HorizontalPodAutoscalerBehaviorArgs']] = None,
                  metrics: Optional[pulumi.Input[Sequence[pulumi.Input['MetricSpecArgs']]]] = None,
-                 min_replicas: Optional[pulumi.Input[int]] = None):
+                 min_replicas: Optional[pulumi.Input[builtins.int]] = None):
         """
         HorizontalPodAutoscalerSpec describes the desired functionality of the HorizontalPodAutoscaler.
-        :param pulumi.Input[int] max_replicas: maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
+        :param pulumi.Input[builtins.int] max_replicas: maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
         :param pulumi.Input['CrossVersionObjectReferenceArgs'] scale_target_ref: scaleTargetRef points to the target resource to scale, and is used to the pods for which metrics should be collected, as well as to actually change the replica count.
         :param pulumi.Input['HorizontalPodAutoscalerBehaviorArgs'] behavior: behavior configures the scaling behavior of the target in both Up and Down directions (scaleUp and scaleDown fields respectively). If not set, the default HPAScalingRules for scale up and scale down are used.
         :param pulumi.Input[Sequence[pulumi.Input['MetricSpecArgs']]] metrics: metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used).  The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods.  Ergo, metrics used must decrease as the pod count is increased, and vice-versa.  See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.
-        :param pulumi.Input[int] min_replicas: minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
+        :param pulumi.Input[builtins.int] min_replicas: minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
         """
         pulumi.set(__self__, "max_replicas", max_replicas)
         pulumi.set(__self__, "scale_target_ref", scale_target_ref)
@@ -1344,14 +1345,14 @@ class HorizontalPodAutoscalerSpecArgs:
 
     @property
     @pulumi.getter(name="maxReplicas")
-    def max_replicas(self) -> pulumi.Input[int]:
+    def max_replicas(self) -> pulumi.Input[builtins.int]:
         """
         maxReplicas is the upper limit for the number of replicas to which the autoscaler can scale up. It cannot be less that minReplicas.
         """
         return pulumi.get(self, "max_replicas")
 
     @max_replicas.setter
-    def max_replicas(self, value: pulumi.Input[int]):
+    def max_replicas(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "max_replicas", value)
 
     @property
@@ -1392,14 +1393,14 @@ class HorizontalPodAutoscalerSpecArgs:
 
     @property
     @pulumi.getter(name="minReplicas")
-    def min_replicas(self) -> Optional[pulumi.Input[int]]:
+    def min_replicas(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         minReplicas is the lower limit for the number of replicas to which the autoscaler can scale down.  It defaults to 1 pod.  minReplicas is allowed to be 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.  Scaling is active as long as at least one metric value is available.
         """
         return pulumi.get(self, "min_replicas")
 
     @min_replicas.setter
-    def min_replicas(self, value: Optional[pulumi.Input[int]]):
+    def min_replicas(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "min_replicas", value)
 
 
@@ -1408,7 +1409,7 @@ if not MYPY:
         """
         HorizontalPodAutoscalerStatus describes the current status of a horizontal pod autoscaler.
         """
-        desired_replicas: pulumi.Input[int]
+        desired_replicas: pulumi.Input[builtins.int]
         """
         desiredReplicas is the desired number of replicas of pods managed by this autoscaler, as last calculated by the autoscaler.
         """
@@ -1420,15 +1421,15 @@ if not MYPY:
         """
         currentMetrics is the last read state of the metrics used by this autoscaler.
         """
-        current_replicas: NotRequired[pulumi.Input[int]]
+        current_replicas: NotRequired[pulumi.Input[builtins.int]]
         """
         currentReplicas is current number of replicas of pods managed by this autoscaler, as last seen by the autoscaler.
         """
-        last_scale_time: NotRequired[pulumi.Input[str]]
+        last_scale_time: NotRequired[pulumi.Input[builtins.str]]
         """
         lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods, used by the autoscaler to control how often the number of pods is changed.
         """
-        observed_generation: NotRequired[pulumi.Input[int]]
+        observed_generation: NotRequired[pulumi.Input[builtins.int]]
         """
         observedGeneration is the most recent generation observed by this autoscaler.
         """
@@ -1438,20 +1439,20 @@ elif False:
 @pulumi.input_type
 class HorizontalPodAutoscalerStatusArgs:
     def __init__(__self__, *,
-                 desired_replicas: pulumi.Input[int],
+                 desired_replicas: pulumi.Input[builtins.int],
                  conditions: Optional[pulumi.Input[Sequence[pulumi.Input['HorizontalPodAutoscalerConditionArgs']]]] = None,
                  current_metrics: Optional[pulumi.Input[Sequence[pulumi.Input['MetricStatusArgs']]]] = None,
-                 current_replicas: Optional[pulumi.Input[int]] = None,
-                 last_scale_time: Optional[pulumi.Input[str]] = None,
-                 observed_generation: Optional[pulumi.Input[int]] = None):
+                 current_replicas: Optional[pulumi.Input[builtins.int]] = None,
+                 last_scale_time: Optional[pulumi.Input[builtins.str]] = None,
+                 observed_generation: Optional[pulumi.Input[builtins.int]] = None):
         """
         HorizontalPodAutoscalerStatus describes the current status of a horizontal pod autoscaler.
-        :param pulumi.Input[int] desired_replicas: desiredReplicas is the desired number of replicas of pods managed by this autoscaler, as last calculated by the autoscaler.
+        :param pulumi.Input[builtins.int] desired_replicas: desiredReplicas is the desired number of replicas of pods managed by this autoscaler, as last calculated by the autoscaler.
         :param pulumi.Input[Sequence[pulumi.Input['HorizontalPodAutoscalerConditionArgs']]] conditions: conditions is the set of conditions required for this autoscaler to scale its target, and indicates whether or not those conditions are met.
         :param pulumi.Input[Sequence[pulumi.Input['MetricStatusArgs']]] current_metrics: currentMetrics is the last read state of the metrics used by this autoscaler.
-        :param pulumi.Input[int] current_replicas: currentReplicas is current number of replicas of pods managed by this autoscaler, as last seen by the autoscaler.
-        :param pulumi.Input[str] last_scale_time: lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods, used by the autoscaler to control how often the number of pods is changed.
-        :param pulumi.Input[int] observed_generation: observedGeneration is the most recent generation observed by this autoscaler.
+        :param pulumi.Input[builtins.int] current_replicas: currentReplicas is current number of replicas of pods managed by this autoscaler, as last seen by the autoscaler.
+        :param pulumi.Input[builtins.str] last_scale_time: lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods, used by the autoscaler to control how often the number of pods is changed.
+        :param pulumi.Input[builtins.int] observed_generation: observedGeneration is the most recent generation observed by this autoscaler.
         """
         pulumi.set(__self__, "desired_replicas", desired_replicas)
         if conditions is not None:
@@ -1467,14 +1468,14 @@ class HorizontalPodAutoscalerStatusArgs:
 
     @property
     @pulumi.getter(name="desiredReplicas")
-    def desired_replicas(self) -> pulumi.Input[int]:
+    def desired_replicas(self) -> pulumi.Input[builtins.int]:
         """
         desiredReplicas is the desired number of replicas of pods managed by this autoscaler, as last calculated by the autoscaler.
         """
         return pulumi.get(self, "desired_replicas")
 
     @desired_replicas.setter
-    def desired_replicas(self, value: pulumi.Input[int]):
+    def desired_replicas(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "desired_replicas", value)
 
     @property
@@ -1503,38 +1504,38 @@ class HorizontalPodAutoscalerStatusArgs:
 
     @property
     @pulumi.getter(name="currentReplicas")
-    def current_replicas(self) -> Optional[pulumi.Input[int]]:
+    def current_replicas(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         currentReplicas is current number of replicas of pods managed by this autoscaler, as last seen by the autoscaler.
         """
         return pulumi.get(self, "current_replicas")
 
     @current_replicas.setter
-    def current_replicas(self, value: Optional[pulumi.Input[int]]):
+    def current_replicas(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "current_replicas", value)
 
     @property
     @pulumi.getter(name="lastScaleTime")
-    def last_scale_time(self) -> Optional[pulumi.Input[str]]:
+    def last_scale_time(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         lastScaleTime is the last time the HorizontalPodAutoscaler scaled the number of pods, used by the autoscaler to control how often the number of pods is changed.
         """
         return pulumi.get(self, "last_scale_time")
 
     @last_scale_time.setter
-    def last_scale_time(self, value: Optional[pulumi.Input[str]]):
+    def last_scale_time(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "last_scale_time", value)
 
     @property
     @pulumi.getter(name="observedGeneration")
-    def observed_generation(self) -> Optional[pulumi.Input[int]]:
+    def observed_generation(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         observedGeneration is the most recent generation observed by this autoscaler.
         """
         return pulumi.get(self, "observed_generation")
 
     @observed_generation.setter
-    def observed_generation(self, value: Optional[pulumi.Input[int]]):
+    def observed_generation(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "observed_generation", value)
 
 
@@ -1543,11 +1544,11 @@ if not MYPY:
         """
         HorizontalPodAutoscaler is the configuration for a horizontal pod autoscaler, which automatically manages the replica count of any resource implementing the scale subresource based on the metrics specified.
         """
-        api_version: NotRequired[pulumi.Input[str]]
+        api_version: NotRequired[pulumi.Input[builtins.str]]
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
-        kind: NotRequired[pulumi.Input[str]]
+        kind: NotRequired[pulumi.Input[builtins.str]]
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
@@ -1569,15 +1570,15 @@ elif False:
 @pulumi.input_type
 class HorizontalPodAutoscalerArgs:
     def __init__(__self__, *,
-                 api_version: Optional[pulumi.Input[str]] = None,
-                 kind: Optional[pulumi.Input[str]] = None,
+                 api_version: Optional[pulumi.Input[builtins.str]] = None,
+                 kind: Optional[pulumi.Input[builtins.str]] = None,
                  metadata: Optional[pulumi.Input['_meta.v1.ObjectMetaArgs']] = None,
                  spec: Optional[pulumi.Input['HorizontalPodAutoscalerSpecArgs']] = None,
                  status: Optional[pulumi.Input['HorizontalPodAutoscalerStatusArgs']] = None):
         """
         HorizontalPodAutoscaler is the configuration for a horizontal pod autoscaler, which automatically manages the replica count of any resource implementing the scale subresource based on the metrics specified.
-        :param pulumi.Input[str] api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param pulumi.Input[str] kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param pulumi.Input[builtins.str] api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param pulumi.Input[builtins.str] kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param pulumi.Input['_meta.v1.ObjectMetaArgs'] metadata: metadata is the standard object metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param pulumi.Input['HorizontalPodAutoscalerSpecArgs'] spec: spec is the specification for the behaviour of the autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.
         :param pulumi.Input['HorizontalPodAutoscalerStatusArgs'] status: status is the current information about the autoscaler.
@@ -1595,26 +1596,26 @@ class HorizontalPodAutoscalerArgs:
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[pulumi.Input[str]]:
+    def api_version(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
     @api_version.setter
-    def api_version(self, value: Optional[pulumi.Input[str]]):
+    def api_version(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "api_version", value)
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[pulumi.Input[str]]:
+    def kind(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
     @kind.setter
-    def kind(self, value: Optional[pulumi.Input[str]]):
+    def kind(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "kind", value)
 
     @property
@@ -1659,7 +1660,7 @@ if not MYPY:
         """
         MetricIdentifier defines the name and optionally selector for a metric
         """
-        name: NotRequired[pulumi.Input[str]]
+        name: NotRequired[pulumi.Input[builtins.str]]
         """
         name is the name of the given metric
         """
@@ -1673,11 +1674,11 @@ elif False:
 @pulumi.input_type
 class MetricIdentifierPatchArgs:
     def __init__(__self__, *,
-                 name: Optional[pulumi.Input[str]] = None,
+                 name: Optional[pulumi.Input[builtins.str]] = None,
                  selector: Optional[pulumi.Input['_meta.v1.LabelSelectorPatchArgs']] = None):
         """
         MetricIdentifier defines the name and optionally selector for a metric
-        :param pulumi.Input[str] name: name is the name of the given metric
+        :param pulumi.Input[builtins.str] name: name is the name of the given metric
         :param pulumi.Input['_meta.v1.LabelSelectorPatchArgs'] selector: selector is the string-encoded form of a standard kubernetes label selector for the given metric When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping. When unset, just the metricName will be used to gather metrics.
         """
         if name is not None:
@@ -1687,14 +1688,14 @@ class MetricIdentifierPatchArgs:
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[pulumi.Input[str]]:
+    def name(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         name is the name of the given metric
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: Optional[pulumi.Input[str]]):
+    def name(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "name", value)
 
     @property
@@ -1715,7 +1716,7 @@ if not MYPY:
         """
         MetricIdentifier defines the name and optionally selector for a metric
         """
-        name: pulumi.Input[str]
+        name: pulumi.Input[builtins.str]
         """
         name is the name of the given metric
         """
@@ -1729,11 +1730,11 @@ elif False:
 @pulumi.input_type
 class MetricIdentifierArgs:
     def __init__(__self__, *,
-                 name: pulumi.Input[str],
+                 name: pulumi.Input[builtins.str],
                  selector: Optional[pulumi.Input['_meta.v1.LabelSelectorArgs']] = None):
         """
         MetricIdentifier defines the name and optionally selector for a metric
-        :param pulumi.Input[str] name: name is the name of the given metric
+        :param pulumi.Input[builtins.str] name: name is the name of the given metric
         :param pulumi.Input['_meta.v1.LabelSelectorArgs'] selector: selector is the string-encoded form of a standard kubernetes label selector for the given metric When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping. When unset, just the metricName will be used to gather metrics.
         """
         pulumi.set(__self__, "name", name)
@@ -1742,14 +1743,14 @@ class MetricIdentifierArgs:
 
     @property
     @pulumi.getter
-    def name(self) -> pulumi.Input[str]:
+    def name(self) -> pulumi.Input[builtins.str]:
         """
         name is the name of the given metric
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: pulumi.Input[str]):
+    def name(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "name", value)
 
     @property
@@ -1790,7 +1791,7 @@ if not MYPY:
         """
         resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
         """
-        type: NotRequired[pulumi.Input[str]]
+        type: NotRequired[pulumi.Input[builtins.str]]
         """
         type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
         """
@@ -1805,7 +1806,7 @@ class MetricSpecPatchArgs:
                  object: Optional[pulumi.Input['ObjectMetricSourcePatchArgs']] = None,
                  pods: Optional[pulumi.Input['PodsMetricSourcePatchArgs']] = None,
                  resource: Optional[pulumi.Input['ResourceMetricSourcePatchArgs']] = None,
-                 type: Optional[pulumi.Input[str]] = None):
+                 type: Optional[pulumi.Input[builtins.str]] = None):
         """
         MetricSpec specifies how to scale based on a single metric (only `type` and one other matching field should be set at once).
         :param pulumi.Input['ContainerResourceMetricSourcePatchArgs'] container_resource: containerResource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod of the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
@@ -1813,7 +1814,7 @@ class MetricSpecPatchArgs:
         :param pulumi.Input['ObjectMetricSourcePatchArgs'] object: object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
         :param pulumi.Input['PodsMetricSourcePatchArgs'] pods: pods refers to a metric describing each pod in the current scale target (for example, transactions-processed-per-second).  The values will be averaged together before being compared to the target value.
         :param pulumi.Input['ResourceMetricSourcePatchArgs'] resource: resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
-        :param pulumi.Input[str] type: type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
+        :param pulumi.Input[builtins.str] type: type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
         """
         if container_resource is not None:
             pulumi.set(__self__, "container_resource", container_resource)
@@ -1890,14 +1891,14 @@ class MetricSpecPatchArgs:
 
     @property
     @pulumi.getter
-    def type(self) -> Optional[pulumi.Input[str]]:
+    def type(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: Optional[pulumi.Input[str]]):
+    def type(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "type", value)
 
 
@@ -1906,7 +1907,7 @@ if not MYPY:
         """
         MetricSpec specifies how to scale based on a single metric (only `type` and one other matching field should be set at once).
         """
-        type: pulumi.Input[str]
+        type: pulumi.Input[builtins.str]
         """
         type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
         """
@@ -1936,7 +1937,7 @@ elif False:
 @pulumi.input_type
 class MetricSpecArgs:
     def __init__(__self__, *,
-                 type: pulumi.Input[str],
+                 type: pulumi.Input[builtins.str],
                  container_resource: Optional[pulumi.Input['ContainerResourceMetricSourceArgs']] = None,
                  external: Optional[pulumi.Input['ExternalMetricSourceArgs']] = None,
                  object: Optional[pulumi.Input['ObjectMetricSourceArgs']] = None,
@@ -1944,7 +1945,7 @@ class MetricSpecArgs:
                  resource: Optional[pulumi.Input['ResourceMetricSourceArgs']] = None):
         """
         MetricSpec specifies how to scale based on a single metric (only `type` and one other matching field should be set at once).
-        :param pulumi.Input[str] type: type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
+        :param pulumi.Input[builtins.str] type: type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
         :param pulumi.Input['ContainerResourceMetricSourceArgs'] container_resource: containerResource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod of the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
         :param pulumi.Input['ExternalMetricSourceArgs'] external: external refers to a global metric that is not associated with any Kubernetes object. It allows autoscaling based on information coming from components running outside of cluster (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).
         :param pulumi.Input['ObjectMetricSourceArgs'] object: object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
@@ -1965,14 +1966,14 @@ class MetricSpecArgs:
 
     @property
     @pulumi.getter
-    def type(self) -> pulumi.Input[str]:
+    def type(self) -> pulumi.Input[builtins.str]:
         """
         type is the type of metric source.  It should be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each mapping to a matching field in the object.
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: pulumi.Input[str]):
+    def type(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "type", value)
 
     @property
@@ -2041,7 +2042,7 @@ if not MYPY:
         """
         MetricStatus describes the last-read state of a single metric.
         """
-        type: pulumi.Input[str]
+        type: pulumi.Input[builtins.str]
         """
         type is the type of metric source.  It will be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each corresponds to a matching field in the object.
         """
@@ -2071,7 +2072,7 @@ elif False:
 @pulumi.input_type
 class MetricStatusArgs:
     def __init__(__self__, *,
-                 type: pulumi.Input[str],
+                 type: pulumi.Input[builtins.str],
                  container_resource: Optional[pulumi.Input['ContainerResourceMetricStatusArgs']] = None,
                  external: Optional[pulumi.Input['ExternalMetricStatusArgs']] = None,
                  object: Optional[pulumi.Input['ObjectMetricStatusArgs']] = None,
@@ -2079,7 +2080,7 @@ class MetricStatusArgs:
                  resource: Optional[pulumi.Input['ResourceMetricStatusArgs']] = None):
         """
         MetricStatus describes the last-read state of a single metric.
-        :param pulumi.Input[str] type: type is the type of metric source.  It will be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each corresponds to a matching field in the object.
+        :param pulumi.Input[builtins.str] type: type is the type of metric source.  It will be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each corresponds to a matching field in the object.
         :param pulumi.Input['ContainerResourceMetricStatusArgs'] container_resource: container resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
         :param pulumi.Input['ExternalMetricStatusArgs'] external: external refers to a global metric that is not associated with any Kubernetes object. It allows autoscaling based on information coming from components running outside of cluster (for example length of queue in cloud messaging service, or QPS from loadbalancer running outside of cluster).
         :param pulumi.Input['ObjectMetricStatusArgs'] object: object refers to a metric describing a single kubernetes object (for example, hits-per-second on an Ingress object).
@@ -2100,14 +2101,14 @@ class MetricStatusArgs:
 
     @property
     @pulumi.getter
-    def type(self) -> pulumi.Input[str]:
+    def type(self) -> pulumi.Input[builtins.str]:
         """
         type is the type of metric source.  It will be one of "ContainerResource", "External", "Object", "Pods" or "Resource", each corresponds to a matching field in the object.
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: pulumi.Input[str]):
+    def type(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "type", value)
 
     @property
@@ -2176,19 +2177,19 @@ if not MYPY:
         """
         MetricTarget defines the target value, average value, or average utilization of a specific metric
         """
-        average_utilization: NotRequired[pulumi.Input[int]]
+        average_utilization: NotRequired[pulumi.Input[builtins.int]]
         """
         averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
         """
-        average_value: NotRequired[pulumi.Input[str]]
+        average_value: NotRequired[pulumi.Input[builtins.str]]
         """
         averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
         """
-        type: NotRequired[pulumi.Input[str]]
+        type: NotRequired[pulumi.Input[builtins.str]]
         """
         type represents whether the metric type is Utilization, Value, or AverageValue
         """
-        value: NotRequired[pulumi.Input[str]]
+        value: NotRequired[pulumi.Input[builtins.str]]
         """
         value is the target value of the metric (as a quantity).
         """
@@ -2198,16 +2199,16 @@ elif False:
 @pulumi.input_type
 class MetricTargetPatchArgs:
     def __init__(__self__, *,
-                 average_utilization: Optional[pulumi.Input[int]] = None,
-                 average_value: Optional[pulumi.Input[str]] = None,
-                 type: Optional[pulumi.Input[str]] = None,
-                 value: Optional[pulumi.Input[str]] = None):
+                 average_utilization: Optional[pulumi.Input[builtins.int]] = None,
+                 average_value: Optional[pulumi.Input[builtins.str]] = None,
+                 type: Optional[pulumi.Input[builtins.str]] = None,
+                 value: Optional[pulumi.Input[builtins.str]] = None):
         """
         MetricTarget defines the target value, average value, or average utilization of a specific metric
-        :param pulumi.Input[int] average_utilization: averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
-        :param pulumi.Input[str] average_value: averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
-        :param pulumi.Input[str] type: type represents whether the metric type is Utilization, Value, or AverageValue
-        :param pulumi.Input[str] value: value is the target value of the metric (as a quantity).
+        :param pulumi.Input[builtins.int] average_utilization: averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
+        :param pulumi.Input[builtins.str] average_value: averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
+        :param pulumi.Input[builtins.str] type: type represents whether the metric type is Utilization, Value, or AverageValue
+        :param pulumi.Input[builtins.str] value: value is the target value of the metric (as a quantity).
         """
         if average_utilization is not None:
             pulumi.set(__self__, "average_utilization", average_utilization)
@@ -2220,50 +2221,50 @@ class MetricTargetPatchArgs:
 
     @property
     @pulumi.getter(name="averageUtilization")
-    def average_utilization(self) -> Optional[pulumi.Input[int]]:
+    def average_utilization(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
         """
         return pulumi.get(self, "average_utilization")
 
     @average_utilization.setter
-    def average_utilization(self, value: Optional[pulumi.Input[int]]):
+    def average_utilization(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "average_utilization", value)
 
     @property
     @pulumi.getter(name="averageValue")
-    def average_value(self) -> Optional[pulumi.Input[str]]:
+    def average_value(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
         """
         return pulumi.get(self, "average_value")
 
     @average_value.setter
-    def average_value(self, value: Optional[pulumi.Input[str]]):
+    def average_value(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "average_value", value)
 
     @property
     @pulumi.getter
-    def type(self) -> Optional[pulumi.Input[str]]:
+    def type(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         type represents whether the metric type is Utilization, Value, or AverageValue
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: Optional[pulumi.Input[str]]):
+    def type(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "type", value)
 
     @property
     @pulumi.getter
-    def value(self) -> Optional[pulumi.Input[str]]:
+    def value(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         value is the target value of the metric (as a quantity).
         """
         return pulumi.get(self, "value")
 
     @value.setter
-    def value(self, value: Optional[pulumi.Input[str]]):
+    def value(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "value", value)
 
 
@@ -2272,19 +2273,19 @@ if not MYPY:
         """
         MetricTarget defines the target value, average value, or average utilization of a specific metric
         """
-        type: pulumi.Input[str]
+        type: pulumi.Input[builtins.str]
         """
         type represents whether the metric type is Utilization, Value, or AverageValue
         """
-        average_utilization: NotRequired[pulumi.Input[int]]
+        average_utilization: NotRequired[pulumi.Input[builtins.int]]
         """
         averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
         """
-        average_value: NotRequired[pulumi.Input[str]]
+        average_value: NotRequired[pulumi.Input[builtins.str]]
         """
         averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
         """
-        value: NotRequired[pulumi.Input[str]]
+        value: NotRequired[pulumi.Input[builtins.str]]
         """
         value is the target value of the metric (as a quantity).
         """
@@ -2294,16 +2295,16 @@ elif False:
 @pulumi.input_type
 class MetricTargetArgs:
     def __init__(__self__, *,
-                 type: pulumi.Input[str],
-                 average_utilization: Optional[pulumi.Input[int]] = None,
-                 average_value: Optional[pulumi.Input[str]] = None,
-                 value: Optional[pulumi.Input[str]] = None):
+                 type: pulumi.Input[builtins.str],
+                 average_utilization: Optional[pulumi.Input[builtins.int]] = None,
+                 average_value: Optional[pulumi.Input[builtins.str]] = None,
+                 value: Optional[pulumi.Input[builtins.str]] = None):
         """
         MetricTarget defines the target value, average value, or average utilization of a specific metric
-        :param pulumi.Input[str] type: type represents whether the metric type is Utilization, Value, or AverageValue
-        :param pulumi.Input[int] average_utilization: averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
-        :param pulumi.Input[str] average_value: averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
-        :param pulumi.Input[str] value: value is the target value of the metric (as a quantity).
+        :param pulumi.Input[builtins.str] type: type represents whether the metric type is Utilization, Value, or AverageValue
+        :param pulumi.Input[builtins.int] average_utilization: averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
+        :param pulumi.Input[builtins.str] average_value: averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
+        :param pulumi.Input[builtins.str] value: value is the target value of the metric (as a quantity).
         """
         pulumi.set(__self__, "type", type)
         if average_utilization is not None:
@@ -2315,50 +2316,50 @@ class MetricTargetArgs:
 
     @property
     @pulumi.getter
-    def type(self) -> pulumi.Input[str]:
+    def type(self) -> pulumi.Input[builtins.str]:
         """
         type represents whether the metric type is Utilization, Value, or AverageValue
         """
         return pulumi.get(self, "type")
 
     @type.setter
-    def type(self, value: pulumi.Input[str]):
+    def type(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "type", value)
 
     @property
     @pulumi.getter(name="averageUtilization")
-    def average_utilization(self) -> Optional[pulumi.Input[int]]:
+    def average_utilization(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         averageUtilization is the target value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods. Currently only valid for Resource metric source type
         """
         return pulumi.get(self, "average_utilization")
 
     @average_utilization.setter
-    def average_utilization(self, value: Optional[pulumi.Input[int]]):
+    def average_utilization(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "average_utilization", value)
 
     @property
     @pulumi.getter(name="averageValue")
-    def average_value(self) -> Optional[pulumi.Input[str]]:
+    def average_value(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         averageValue is the target value of the average of the metric across all relevant pods (as a quantity)
         """
         return pulumi.get(self, "average_value")
 
     @average_value.setter
-    def average_value(self, value: Optional[pulumi.Input[str]]):
+    def average_value(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "average_value", value)
 
     @property
     @pulumi.getter
-    def value(self) -> Optional[pulumi.Input[str]]:
+    def value(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         value is the target value of the metric (as a quantity).
         """
         return pulumi.get(self, "value")
 
     @value.setter
-    def value(self, value: Optional[pulumi.Input[str]]):
+    def value(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "value", value)
 
 
@@ -2367,15 +2368,15 @@ if not MYPY:
         """
         MetricValueStatus holds the current value for a metric
         """
-        average_utilization: NotRequired[pulumi.Input[int]]
+        average_utilization: NotRequired[pulumi.Input[builtins.int]]
         """
         currentAverageUtilization is the current value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods.
         """
-        average_value: NotRequired[pulumi.Input[str]]
+        average_value: NotRequired[pulumi.Input[builtins.str]]
         """
         averageValue is the current value of the average of the metric across all relevant pods (as a quantity)
         """
-        value: NotRequired[pulumi.Input[str]]
+        value: NotRequired[pulumi.Input[builtins.str]]
         """
         value is the current value of the metric (as a quantity).
         """
@@ -2385,14 +2386,14 @@ elif False:
 @pulumi.input_type
 class MetricValueStatusArgs:
     def __init__(__self__, *,
-                 average_utilization: Optional[pulumi.Input[int]] = None,
-                 average_value: Optional[pulumi.Input[str]] = None,
-                 value: Optional[pulumi.Input[str]] = None):
+                 average_utilization: Optional[pulumi.Input[builtins.int]] = None,
+                 average_value: Optional[pulumi.Input[builtins.str]] = None,
+                 value: Optional[pulumi.Input[builtins.str]] = None):
         """
         MetricValueStatus holds the current value for a metric
-        :param pulumi.Input[int] average_utilization: currentAverageUtilization is the current value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods.
-        :param pulumi.Input[str] average_value: averageValue is the current value of the average of the metric across all relevant pods (as a quantity)
-        :param pulumi.Input[str] value: value is the current value of the metric (as a quantity).
+        :param pulumi.Input[builtins.int] average_utilization: currentAverageUtilization is the current value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods.
+        :param pulumi.Input[builtins.str] average_value: averageValue is the current value of the average of the metric across all relevant pods (as a quantity)
+        :param pulumi.Input[builtins.str] value: value is the current value of the metric (as a quantity).
         """
         if average_utilization is not None:
             pulumi.set(__self__, "average_utilization", average_utilization)
@@ -2403,38 +2404,38 @@ class MetricValueStatusArgs:
 
     @property
     @pulumi.getter(name="averageUtilization")
-    def average_utilization(self) -> Optional[pulumi.Input[int]]:
+    def average_utilization(self) -> Optional[pulumi.Input[builtins.int]]:
         """
         currentAverageUtilization is the current value of the average of the resource metric across all relevant pods, represented as a percentage of the requested value of the resource for the pods.
         """
         return pulumi.get(self, "average_utilization")
 
     @average_utilization.setter
-    def average_utilization(self, value: Optional[pulumi.Input[int]]):
+    def average_utilization(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "average_utilization", value)
 
     @property
     @pulumi.getter(name="averageValue")
-    def average_value(self) -> Optional[pulumi.Input[str]]:
+    def average_value(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         averageValue is the current value of the average of the metric across all relevant pods (as a quantity)
         """
         return pulumi.get(self, "average_value")
 
     @average_value.setter
-    def average_value(self, value: Optional[pulumi.Input[str]]):
+    def average_value(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "average_value", value)
 
     @property
     @pulumi.getter
-    def value(self) -> Optional[pulumi.Input[str]]:
+    def value(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         value is the current value of the metric (as a quantity).
         """
         return pulumi.get(self, "value")
 
     @value.setter
-    def value(self, value: Optional[pulumi.Input[str]]):
+    def value(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "value", value)
 
 
@@ -2829,7 +2830,7 @@ if not MYPY:
         """
         ResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
         """
-        name: NotRequired[pulumi.Input[str]]
+        name: NotRequired[pulumi.Input[builtins.str]]
         """
         name is the name of the resource in question.
         """
@@ -2843,11 +2844,11 @@ elif False:
 @pulumi.input_type
 class ResourceMetricSourcePatchArgs:
     def __init__(__self__, *,
-                 name: Optional[pulumi.Input[str]] = None,
+                 name: Optional[pulumi.Input[builtins.str]] = None,
                  target: Optional[pulumi.Input['MetricTargetPatchArgs']] = None):
         """
         ResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
-        :param pulumi.Input[str] name: name is the name of the resource in question.
+        :param pulumi.Input[builtins.str] name: name is the name of the resource in question.
         :param pulumi.Input['MetricTargetPatchArgs'] target: target specifies the target value for the given metric
         """
         if name is not None:
@@ -2857,14 +2858,14 @@ class ResourceMetricSourcePatchArgs:
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[pulumi.Input[str]]:
+    def name(self) -> Optional[pulumi.Input[builtins.str]]:
         """
         name is the name of the resource in question.
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: Optional[pulumi.Input[str]]):
+    def name(self, value: Optional[pulumi.Input[builtins.str]]):
         pulumi.set(self, "name", value)
 
     @property
@@ -2885,7 +2886,7 @@ if not MYPY:
         """
         ResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
         """
-        name: pulumi.Input[str]
+        name: pulumi.Input[builtins.str]
         """
         name is the name of the resource in question.
         """
@@ -2899,11 +2900,11 @@ elif False:
 @pulumi.input_type
 class ResourceMetricSourceArgs:
     def __init__(__self__, *,
-                 name: pulumi.Input[str],
+                 name: pulumi.Input[builtins.str],
                  target: pulumi.Input['MetricTargetArgs']):
         """
         ResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  The values will be averaged together before being compared to the target.  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.  Only one "target" type should be set.
-        :param pulumi.Input[str] name: name is the name of the resource in question.
+        :param pulumi.Input[builtins.str] name: name is the name of the resource in question.
         :param pulumi.Input['MetricTargetArgs'] target: target specifies the target value for the given metric
         """
         pulumi.set(__self__, "name", name)
@@ -2911,14 +2912,14 @@ class ResourceMetricSourceArgs:
 
     @property
     @pulumi.getter
-    def name(self) -> pulumi.Input[str]:
+    def name(self) -> pulumi.Input[builtins.str]:
         """
         name is the name of the resource in question.
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: pulumi.Input[str]):
+    def name(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "name", value)
 
     @property
@@ -2943,7 +2944,7 @@ if not MYPY:
         """
         current contains the current value for the given metric
         """
-        name: pulumi.Input[str]
+        name: pulumi.Input[builtins.str]
         """
         name is the name of the resource in question.
         """
@@ -2954,11 +2955,11 @@ elif False:
 class ResourceMetricStatusArgs:
     def __init__(__self__, *,
                  current: pulumi.Input['MetricValueStatusArgs'],
-                 name: pulumi.Input[str]):
+                 name: pulumi.Input[builtins.str]):
         """
         ResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory).  Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.
         :param pulumi.Input['MetricValueStatusArgs'] current: current contains the current value for the given metric
-        :param pulumi.Input[str] name: name is the name of the resource in question.
+        :param pulumi.Input[builtins.str] name: name is the name of the resource in question.
         """
         pulumi.set(__self__, "current", current)
         pulumi.set(__self__, "name", name)
@@ -2977,14 +2978,14 @@ class ResourceMetricStatusArgs:
 
     @property
     @pulumi.getter
-    def name(self) -> pulumi.Input[str]:
+    def name(self) -> pulumi.Input[builtins.str]:
         """
         name is the name of the resource in question.
         """
         return pulumi.get(self, "name")
 
     @name.setter
-    def name(self, value: pulumi.Input[str]):
+    def name(self, value: pulumi.Input[builtins.str]):
         pulumi.set(self, "name", value)