pulumi-kubernetes 4.22.1__py3-none-any.whl → 4.23.0__py3-none-any.whl

pulumi_kubernetes/discovery/v1/outputs.py

@@ -2,6 +2,7 @@
 # *** WARNING: this file was generated by pulumigen. ***
 # *** Do not edit by hand unless you're certain you know what you are doing! ***
 
+import builtins
 import copy
 import warnings
 import sys
@@ -27,6 +28,8 @@ __all__ = [
     'EndpointPort',
     'EndpointPortPatch',
     'EndpointSlice',
+    'ForNode',
+    'ForNodePatch',
     'ForZone',
     'ForZonePatch',
 ]
@@ -58,24 +61,24 @@ class Endpoint(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 addresses: Sequence[str],
+                 addresses: Sequence[builtins.str],
                  conditions: Optional['outputs.EndpointConditions'] = None,
-                 deprecated_topology: Optional[Mapping[str, str]] = None,
+                 deprecated_topology: Optional[Mapping[str, builtins.str]] = None,
                  hints: Optional['outputs.EndpointHints'] = None,
-                 hostname: Optional[str] = None,
-                 node_name: Optional[str] = None,
+                 hostname: Optional[builtins.str] = None,
+                 node_name: Optional[builtins.str] = None,
                  target_ref: Optional['_core.v1.outputs.ObjectReference'] = None,
-                 zone: Optional[str] = None):
+                 zone: Optional[builtins.str] = None):
         """
         Endpoint represents a single logical "backend" implementing a service.
-        :param Sequence[str] addresses: addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
+        :param Sequence[builtins.str] addresses: addresses of this endpoint. For EndpointSlices of addressType "IPv4" or "IPv6", the values are IP addresses in canonical form. The syntax and semantics of other addressType values are not defined. This must contain at least one address but no more than 100. EndpointSlices generated by the EndpointSlice controller will always have exactly 1 address. No semantics are defined for additional addresses beyond the first, and kube-proxy does not look at them.
         :param 'EndpointConditionsArgs' conditions: conditions contains information about the current status of the endpoint.
-        :param Mapping[str, str] deprecated_topology: deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
+        :param Mapping[str, builtins.str] deprecated_topology: deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
         :param 'EndpointHintsArgs' hints: hints contains information associated with how an endpoint should be consumed.
-        :param str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
-        :param str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
+        :param builtins.str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
+        :param builtins.str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
         :param '_core.v1.ObjectReferenceArgs' target_ref: targetRef is a reference to a Kubernetes object that represents this endpoint.
-        :param str zone: zone is the name of the Zone this endpoint exists in.
+        :param builtins.str zone: zone is the name of the Zone this endpoint exists in.
         """
         pulumi.set(__self__, "addresses", addresses)
         if conditions is not None:
@@ -95,9 +98,9 @@ class Endpoint(dict):
 
     @property
     @pulumi.getter
-    def addresses(self) -> Sequence[str]:
+    def addresses(self) -> Sequence[builtins.str]:
         """
-        addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
+        addresses of this endpoint. For EndpointSlices of addressType "IPv4" or "IPv6", the values are IP addresses in canonical form. The syntax and semantics of other addressType values are not defined. This must contain at least one address but no more than 100. EndpointSlices generated by the EndpointSlice controller will always have exactly 1 address. No semantics are defined for additional addresses beyond the first, and kube-proxy does not look at them.
         """
         return pulumi.get(self, "addresses")
 
@@ -111,7 +114,7 @@ class Endpoint(dict):
 
     @property
     @pulumi.getter(name="deprecatedTopology")
-    def deprecated_topology(self) -> Optional[Mapping[str, str]]:
+    def deprecated_topology(self) -> Optional[Mapping[str, builtins.str]]:
         """
         deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
         """
@@ -127,7 +130,7 @@ class Endpoint(dict):
 
     @property
     @pulumi.getter
-    def hostname(self) -> Optional[str]:
+    def hostname(self) -> Optional[builtins.str]:
         """
         hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
         """
@@ -135,7 +138,7 @@ class Endpoint(dict):
 
     @property
     @pulumi.getter(name="nodeName")
-    def node_name(self) -> Optional[str]:
+    def node_name(self) -> Optional[builtins.str]:
         """
         nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
         """
@@ -151,7 +154,7 @@ class Endpoint(dict):
 
     @property
     @pulumi.getter
-    def zone(self) -> Optional[str]:
+    def zone(self) -> Optional[builtins.str]:
         """
         zone is the name of the Zone this endpoint exists in.
         """
@@ -164,14 +167,14 @@ class EndpointConditions(dict):
     EndpointConditions represents the current condition of an endpoint.
     """
     def __init__(__self__, *,
-                 ready: Optional[bool] = None,
-                 serving: Optional[bool] = None,
-                 terminating: Optional[bool] = None):
+                 ready: Optional[builtins.bool] = None,
+                 serving: Optional[builtins.bool] = None,
+                 terminating: Optional[builtins.bool] = None):
         """
         EndpointConditions represents the current condition of an endpoint.
-        :param bool ready: ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
-        :param bool serving: serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
-        :param bool terminating: terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
+        :param builtins.bool ready: ready indicates that this endpoint is ready to receive traffic, according to whatever system is managing the endpoint. A nil value should be interpreted as "true". In general, an endpoint should be marked ready if it is serving and not terminating, though this can be overridden in some cases, such as when the associated Service has set the publishNotReadyAddresses flag.
+        :param builtins.bool serving: serving indicates that this endpoint is able to receive traffic, according to whatever system is managing the endpoint. For endpoints backed by pods, the EndpointSlice controller will mark the endpoint as serving if the pod's Ready condition is True. A nil value should be interpreted as "true".
+        :param builtins.bool terminating: terminating indicates that this endpoint is terminating. A nil value should be interpreted as "false".
         """
         if ready is not None:
             pulumi.set(__self__, "ready", ready)
@@ -182,25 +185,25 @@ class EndpointConditions(dict):
 
     @property
     @pulumi.getter
-    def ready(self) -> Optional[bool]:
+    def ready(self) -> Optional[builtins.bool]:
         """
-        ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
+        ready indicates that this endpoint is ready to receive traffic, according to whatever system is managing the endpoint. A nil value should be interpreted as "true". In general, an endpoint should be marked ready if it is serving and not terminating, though this can be overridden in some cases, such as when the associated Service has set the publishNotReadyAddresses flag.
         """
         return pulumi.get(self, "ready")
 
     @property
     @pulumi.getter
-    def serving(self) -> Optional[bool]:
+    def serving(self) -> Optional[builtins.bool]:
         """
-        serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
+        serving indicates that this endpoint is able to receive traffic, according to whatever system is managing the endpoint. For endpoints backed by pods, the EndpointSlice controller will mark the endpoint as serving if the pod's Ready condition is True. A nil value should be interpreted as "true".
         """
         return pulumi.get(self, "serving")
 
     @property
     @pulumi.getter
-    def terminating(self) -> Optional[bool]:
+    def terminating(self) -> Optional[builtins.bool]:
         """
-        terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
+        terminating indicates that this endpoint is terminating. A nil value should be interpreted as "false".
         """
         return pulumi.get(self, "terminating")
 
@@ -211,14 +214,14 @@ class EndpointConditionsPatch(dict):
     EndpointConditions represents the current condition of an endpoint.
     """
     def __init__(__self__, *,
-                 ready: Optional[bool] = None,
-                 serving: Optional[bool] = None,
-                 terminating: Optional[bool] = None):
+                 ready: Optional[builtins.bool] = None,
+                 serving: Optional[builtins.bool] = None,
+                 terminating: Optional[builtins.bool] = None):
         """
         EndpointConditions represents the current condition of an endpoint.
-        :param bool ready: ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
-        :param bool serving: serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
-        :param bool terminating: terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
+        :param builtins.bool ready: ready indicates that this endpoint is ready to receive traffic, according to whatever system is managing the endpoint. A nil value should be interpreted as "true". In general, an endpoint should be marked ready if it is serving and not terminating, though this can be overridden in some cases, such as when the associated Service has set the publishNotReadyAddresses flag.
+        :param builtins.bool serving: serving indicates that this endpoint is able to receive traffic, according to whatever system is managing the endpoint. For endpoints backed by pods, the EndpointSlice controller will mark the endpoint as serving if the pod's Ready condition is True. A nil value should be interpreted as "true".
+        :param builtins.bool terminating: terminating indicates that this endpoint is terminating. A nil value should be interpreted as "false".
         """
         if ready is not None:
             pulumi.set(__self__, "ready", ready)
@@ -229,25 +232,25 @@ class EndpointConditionsPatch(dict):
 
     @property
     @pulumi.getter
-    def ready(self) -> Optional[bool]:
+    def ready(self) -> Optional[builtins.bool]:
         """
-        ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
+        ready indicates that this endpoint is ready to receive traffic, according to whatever system is managing the endpoint. A nil value should be interpreted as "true". In general, an endpoint should be marked ready if it is serving and not terminating, though this can be overridden in some cases, such as when the associated Service has set the publishNotReadyAddresses flag.
         """
         return pulumi.get(self, "ready")
 
     @property
     @pulumi.getter
-    def serving(self) -> Optional[bool]:
+    def serving(self) -> Optional[builtins.bool]:
         """
-        serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
+        serving indicates that this endpoint is able to receive traffic, according to whatever system is managing the endpoint. For endpoints backed by pods, the EndpointSlice controller will mark the endpoint as serving if the pod's Ready condition is True. A nil value should be interpreted as "true".
         """
         return pulumi.get(self, "serving")
 
     @property
     @pulumi.getter
-    def terminating(self) -> Optional[bool]:
+    def terminating(self) -> Optional[builtins.bool]:
         """
-        terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
+        terminating indicates that this endpoint is terminating. A nil value should be interpreted as "false".
         """
         return pulumi.get(self, "terminating")
 
@@ -260,7 +263,9 @@ class EndpointHints(dict):
     @staticmethod
     def __key_warning(key: str):
         suggest = None
-        if key == "forZones":
+        if key == "forNodes":
+            suggest = "for_nodes"
+        elif key == "forZones":
             suggest = "for_zones"
 
         if suggest:
@@ -275,19 +280,31 @@ class EndpointHints(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
+                 for_nodes: Optional[Sequence['outputs.ForNode']] = None,
                  for_zones: Optional[Sequence['outputs.ForZone']] = None):
         """
         EndpointHints provides hints describing how an endpoint should be consumed.
-        :param Sequence['ForZoneArgs'] for_zones: forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
+        :param Sequence['ForNodeArgs'] for_nodes: forNodes indicates the node(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries. This is an Alpha feature and is only used when the PreferSameTrafficDistribution feature gate is enabled.
+        :param Sequence['ForZoneArgs'] for_zones: forZones indicates the zone(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries.
         """
+        if for_nodes is not None:
+            pulumi.set(__self__, "for_nodes", for_nodes)
         if for_zones is not None:
             pulumi.set(__self__, "for_zones", for_zones)
 
+    @property
+    @pulumi.getter(name="forNodes")
+    def for_nodes(self) -> Optional[Sequence['outputs.ForNode']]:
+        """
+        forNodes indicates the node(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries. This is an Alpha feature and is only used when the PreferSameTrafficDistribution feature gate is enabled.
+        """
+        return pulumi.get(self, "for_nodes")
+
     @property
     @pulumi.getter(name="forZones")
     def for_zones(self) -> Optional[Sequence['outputs.ForZone']]:
         """
-        forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
+        forZones indicates the zone(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries.
         """
         return pulumi.get(self, "for_zones")
 
@@ -300,7 +317,9 @@ class EndpointHintsPatch(dict):
     @staticmethod
     def __key_warning(key: str):
         suggest = None
-        if key == "forZones":
+        if key == "forNodes":
+            suggest = "for_nodes"
+        elif key == "forZones":
             suggest = "for_zones"
 
         if suggest:
@@ -315,19 +334,31 @@ class EndpointHintsPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
+                 for_nodes: Optional[Sequence['outputs.ForNodePatch']] = None,
                  for_zones: Optional[Sequence['outputs.ForZonePatch']] = None):
         """
         EndpointHints provides hints describing how an endpoint should be consumed.
-        :param Sequence['ForZonePatchArgs'] for_zones: forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
+        :param Sequence['ForNodePatchArgs'] for_nodes: forNodes indicates the node(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries. This is an Alpha feature and is only used when the PreferSameTrafficDistribution feature gate is enabled.
+        :param Sequence['ForZonePatchArgs'] for_zones: forZones indicates the zone(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries.
         """
+        if for_nodes is not None:
+            pulumi.set(__self__, "for_nodes", for_nodes)
         if for_zones is not None:
             pulumi.set(__self__, "for_zones", for_zones)
 
+    @property
+    @pulumi.getter(name="forNodes")
+    def for_nodes(self) -> Optional[Sequence['outputs.ForNodePatch']]:
+        """
+        forNodes indicates the node(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries. This is an Alpha feature and is only used when the PreferSameTrafficDistribution feature gate is enabled.
+        """
+        return pulumi.get(self, "for_nodes")
+
     @property
     @pulumi.getter(name="forZones")
     def for_zones(self) -> Optional[Sequence['outputs.ForZonePatch']]:
         """
-        forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
+        forZones indicates the zone(s) this endpoint should be consumed by when using topology aware routing. May contain a maximum of 8 entries.
         """
         return pulumi.get(self, "for_zones")
 
@@ -359,24 +390,24 @@ class EndpointPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 addresses: Optional[Sequence[str]] = None,
+                 addresses: Optional[Sequence[builtins.str]] = None,
                  conditions: Optional['outputs.EndpointConditionsPatch'] = None,
-                 deprecated_topology: Optional[Mapping[str, str]] = None,
+                 deprecated_topology: Optional[Mapping[str, builtins.str]] = None,
                  hints: Optional['outputs.EndpointHintsPatch'] = None,
-                 hostname: Optional[str] = None,
-                 node_name: Optional[str] = None,
+                 hostname: Optional[builtins.str] = None,
+                 node_name: Optional[builtins.str] = None,
                  target_ref: Optional['_core.v1.outputs.ObjectReferencePatch'] = None,
-                 zone: Optional[str] = None):
+                 zone: Optional[builtins.str] = None):
         """
         Endpoint represents a single logical "backend" implementing a service.
-        :param Sequence[str] addresses: addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
+        :param Sequence[builtins.str] addresses: addresses of this endpoint. For EndpointSlices of addressType "IPv4" or "IPv6", the values are IP addresses in canonical form. The syntax and semantics of other addressType values are not defined. This must contain at least one address but no more than 100. EndpointSlices generated by the EndpointSlice controller will always have exactly 1 address. No semantics are defined for additional addresses beyond the first, and kube-proxy does not look at them.
         :param 'EndpointConditionsPatchArgs' conditions: conditions contains information about the current status of the endpoint.
-        :param Mapping[str, str] deprecated_topology: deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
+        :param Mapping[str, builtins.str] deprecated_topology: deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
         :param 'EndpointHintsPatchArgs' hints: hints contains information associated with how an endpoint should be consumed.
-        :param str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
-        :param str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
+        :param builtins.str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
+        :param builtins.str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
         :param '_core.v1.ObjectReferencePatchArgs' target_ref: targetRef is a reference to a Kubernetes object that represents this endpoint.
-        :param str zone: zone is the name of the Zone this endpoint exists in.
+        :param builtins.str zone: zone is the name of the Zone this endpoint exists in.
         """
         if addresses is not None:
             pulumi.set(__self__, "addresses", addresses)
@@ -397,9 +428,9 @@ class EndpointPatch(dict):
 
     @property
     @pulumi.getter
-    def addresses(self) -> Optional[Sequence[str]]:
+    def addresses(self) -> Optional[Sequence[builtins.str]]:
         """
-        addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
+        addresses of this endpoint. For EndpointSlices of addressType "IPv4" or "IPv6", the values are IP addresses in canonical form. The syntax and semantics of other addressType values are not defined. This must contain at least one address but no more than 100. EndpointSlices generated by the EndpointSlice controller will always have exactly 1 address. No semantics are defined for additional addresses beyond the first, and kube-proxy does not look at them.
         """
         return pulumi.get(self, "addresses")
 
@@ -413,7 +444,7 @@ class EndpointPatch(dict):
 
     @property
     @pulumi.getter(name="deprecatedTopology")
-    def deprecated_topology(self) -> Optional[Mapping[str, str]]:
+    def deprecated_topology(self) -> Optional[Mapping[str, builtins.str]]:
         """
         deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
         """
@@ -429,7 +460,7 @@ class EndpointPatch(dict):
 
     @property
     @pulumi.getter
-    def hostname(self) -> Optional[str]:
+    def hostname(self) -> Optional[builtins.str]:
         """
         hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
         """
@@ -437,7 +468,7 @@ class EndpointPatch(dict):
 
     @property
     @pulumi.getter(name="nodeName")
-    def node_name(self) -> Optional[str]:
+    def node_name(self) -> Optional[builtins.str]:
         """
         nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
         """
@@ -453,7 +484,7 @@ class EndpointPatch(dict):
 
     @property
     @pulumi.getter
-    def zone(self) -> Optional[str]:
+    def zone(self) -> Optional[builtins.str]:
         """
         zone is the name of the Zone this endpoint exists in.
         """
@@ -483,13 +514,13 @@ class EndpointPort(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 app_protocol: Optional[str] = None,
-                 name: Optional[str] = None,
-                 port: Optional[int] = None,
-                 protocol: Optional[str] = None):
+                 app_protocol: Optional[builtins.str] = None,
+                 name: Optional[builtins.str] = None,
+                 port: Optional[builtins.int] = None,
+                 protocol: Optional[builtins.str] = None):
         """
         EndpointPort represents a Port used by an EndpointSlice
-        :param str app_protocol: The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
+        :param builtins.str app_protocol: The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
                
                * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).
                
@@ -499,9 +530,9 @@ class EndpointPort(dict):
                  * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455
                
                * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
-        :param str name: name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
-        :param int port: port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
-        :param str protocol: protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
+        :param builtins.str name: name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
+        :param builtins.int port: port represents the port number of the endpoint. If the EndpointSlice is derived from a Kubernetes service, this must be set to the service's target port. EndpointSlices used for other purposes may have a nil port.
+        :param builtins.str protocol: protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
         if app_protocol is not None:
             pulumi.set(__self__, "app_protocol", app_protocol)
@@ -514,7 +545,7 @@ class EndpointPort(dict):
 
     @property
     @pulumi.getter(name="appProtocol")
-    def app_protocol(self) -> Optional[str]:
+    def app_protocol(self) -> Optional[builtins.str]:
         """
         The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
 
@@ -531,7 +562,7 @@ class EndpointPort(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
         """
@@ -539,15 +570,15 @@ class EndpointPort(dict):
 
     @property
     @pulumi.getter
-    def port(self) -> Optional[int]:
+    def port(self) -> Optional[builtins.int]:
         """
-        port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
+        port represents the port number of the endpoint. If the EndpointSlice is derived from a Kubernetes service, this must be set to the service's target port. EndpointSlices used for other purposes may have a nil port.
         """
         return pulumi.get(self, "port")
 
     @property
     @pulumi.getter
-    def protocol(self) -> Optional[str]:
+    def protocol(self) -> Optional[builtins.str]:
         """
         protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
@@ -577,13 +608,13 @@ class EndpointPortPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 app_protocol: Optional[str] = None,
-                 name: Optional[str] = None,
-                 port: Optional[int] = None,
-                 protocol: Optional[str] = None):
+                 app_protocol: Optional[builtins.str] = None,
+                 name: Optional[builtins.str] = None,
+                 port: Optional[builtins.int] = None,
+                 protocol: Optional[builtins.str] = None):
         """
         EndpointPort represents a Port used by an EndpointSlice
-        :param str app_protocol: The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
+        :param builtins.str app_protocol: The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
                
                * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).
                
@@ -593,9 +624,9 @@ class EndpointPortPatch(dict):
                  * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455
                
                * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
-        :param str name: name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
-        :param int port: port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
-        :param str protocol: protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
+        :param builtins.str name: name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
+        :param builtins.int port: port represents the port number of the endpoint. If the EndpointSlice is derived from a Kubernetes service, this must be set to the service's target port. EndpointSlices used for other purposes may have a nil port.
+        :param builtins.str protocol: protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
         if app_protocol is not None:
             pulumi.set(__self__, "app_protocol", app_protocol)
@@ -608,7 +639,7 @@ class EndpointPortPatch(dict):
 
     @property
     @pulumi.getter(name="appProtocol")
-    def app_protocol(self) -> Optional[str]:
+    def app_protocol(self) -> Optional[builtins.str]:
         """
         The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
 
@@ -625,7 +656,7 @@ class EndpointPortPatch(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
         """
@@ -633,15 +664,15 @@ class EndpointPortPatch(dict):
 
     @property
     @pulumi.getter
-    def port(self) -> Optional[int]:
+    def port(self) -> Optional[builtins.int]:
         """
-        port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
+        port represents the port number of the endpoint. If the EndpointSlice is derived from a Kubernetes service, this must be set to the service's target port. EndpointSlices used for other purposes may have a nil port.
         """
         return pulumi.get(self, "port")
 
     @property
     @pulumi.getter
-    def protocol(self) -> Optional[str]:
+    def protocol(self) -> Optional[builtins.str]:
         """
         protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
@@ -651,7 +682,7 @@ class EndpointPortPatch(dict):
 @pulumi.output_type
 class EndpointSlice(dict):
     """
-    EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.
+    EndpointSlice represents a set of service endpoints. Most EndpointSlices are created by the EndpointSlice controller to represent the Pods selected by Service objects. For a given service there may be multiple EndpointSlice objects which must be joined to produce the full set of endpoints; you can find all of the slices for a given service by listing EndpointSlices in the service's namespace whose `kubernetes.io/service-name` label contains the service's name.
     """
     @staticmethod
     def __key_warning(key: str):
@@ -673,20 +704,20 @@ class EndpointSlice(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 address_type: str,
+                 address_type: builtins.str,
                  endpoints: Sequence['outputs.Endpoint'],
-                 api_version: Optional[str] = None,
-                 kind: Optional[str] = None,
+                 api_version: Optional[builtins.str] = None,
+                 kind: Optional[builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  ports: Optional[Sequence['outputs.EndpointPort']] = None):
         """
-        EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.
-        :param str address_type: addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
+        EndpointSlice represents a set of service endpoints. Most EndpointSlices are created by the EndpointSlice controller to represent the Pods selected by Service objects. For a given service there may be multiple EndpointSlice objects which must be joined to produce the full set of endpoints; you can find all of the slices for a given service by listing EndpointSlices in the service's namespace whose `kubernetes.io/service-name` label contains the service's name.
+        :param builtins.str address_type: addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name. (Deprecated) The EndpointSlice controller only generates, and kube-proxy only processes, slices of addressType "IPv4" and "IPv6". No semantics are defined for the "FQDN" type.
         :param Sequence['EndpointArgs'] endpoints: endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
-        :param str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata.
-        :param Sequence['EndpointPortArgs'] ports: ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
+        :param Sequence['EndpointPortArgs'] ports: ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. Each slice may include a maximum of 100 ports. Services always have at least 1 port, so EndpointSlices generated by the EndpointSlice controller will likewise always have at least 1 port. EndpointSlices used for other purposes may have an empty ports list.
         """
         pulumi.set(__self__, "address_type", address_type)
         pulumi.set(__self__, "endpoints", endpoints)
@@ -701,9 +732,9 @@ class EndpointSlice(dict):
 
     @property
     @pulumi.getter(name="addressType")
-    def address_type(self) -> str:
+    def address_type(self) -> builtins.str:
         """
-        addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
+        addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name. (Deprecated) The EndpointSlice controller only generates, and kube-proxy only processes, slices of addressType "IPv4" and "IPv6". No semantics are defined for the "FQDN" type.
         """
         return pulumi.get(self, "address_type")
 
@@ -717,7 +748,7 @@ class EndpointSlice(dict):
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[str]:
+    def api_version(self) -> Optional[builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
@@ -725,7 +756,7 @@ class EndpointSlice(dict):
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[str]:
+    def kind(self) -> Optional[builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
@@ -743,27 +774,72 @@ class EndpointSlice(dict):
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.EndpointPort']]:
         """
-        ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
+        ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. Each slice may include a maximum of 100 ports. Services always have at least 1 port, so EndpointSlices generated by the EndpointSlice controller will likewise always have at least 1 port. EndpointSlices used for other purposes may have an empty ports list.
         """
         return pulumi.get(self, "ports")
 
 
+@pulumi.output_type
+class ForNode(dict):
+    """
+    ForNode provides information about which nodes should consume this endpoint.
+    """
+    def __init__(__self__, *,
+                 name: builtins.str):
+        """
+        ForNode provides information about which nodes should consume this endpoint.
+        :param builtins.str name: name represents the name of the node.
+        """
+        pulumi.set(__self__, "name", name)
+
+    @property
+    @pulumi.getter
+    def name(self) -> builtins.str:
+        """
+        name represents the name of the node.
+        """
+        return pulumi.get(self, "name")
+
+
+@pulumi.output_type
+class ForNodePatch(dict):
+    """
+    ForNode provides information about which nodes should consume this endpoint.
+    """
+    def __init__(__self__, *,
+                 name: Optional[builtins.str] = None):
+        """
+        ForNode provides information about which nodes should consume this endpoint.
+        :param builtins.str name: name represents the name of the node.
+        """
+        if name is not None:
+            pulumi.set(__self__, "name", name)
+
+    @property
+    @pulumi.getter
+    def name(self) -> Optional[builtins.str]:
+        """
+        name represents the name of the node.
+        """
+        return pulumi.get(self, "name")
+
+
 @pulumi.output_type
 class ForZone(dict):
     """
     ForZone provides information about which zones should consume this endpoint.
     """
     def __init__(__self__, *,
-                 name: str):
+                 name: builtins.str):
         """
         ForZone provides information about which zones should consume this endpoint.
-        :param str name: name represents the name of the zone.
+        :param builtins.str name: name represents the name of the zone.
         """
         pulumi.set(__self__, "name", name)
 
     @property
     @pulumi.getter
-    def name(self) -> str:
+    def name(self) -> builtins.str:
         """
         name represents the name of the zone.
         """
@@ -776,17 +852,17 @@ class ForZonePatch(dict):
     ForZone provides information about which zones should consume this endpoint.
     """
     def __init__(__self__, *,
-                 name: Optional[str] = None):
+                 name: Optional[builtins.str] = None):
         """
         ForZone provides information about which zones should consume this endpoint.
-        :param str name: name represents the name of the zone.
+        :param builtins.str name: name represents the name of the zone.
         """
         if name is not None:
             pulumi.set(__self__, "name", name)
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name represents the name of the zone.
         """