pulumi-kubernetes 4.22.1__py3-none-any.whl → 4.22.2__py3-none-any.whl

pulumi_kubernetes/networking/v1/outputs.py

@@ -2,6 +2,7 @@
 # *** WARNING: this file was generated by pulumigen. ***
 # *** Do not edit by hand unless you're certain you know what you are doing! ***
 
+import builtins
 import copy
 import warnings
 import sys
@@ -89,12 +90,12 @@ class HTTPIngressPath(dict):
 
     def __init__(__self__, *,
                  backend: 'outputs.IngressBackend',
-                 path_type: str,
-                 path: Optional[str] = None):
+                 path_type: builtins.str,
+                 path: Optional[builtins.str] = None):
         """
         HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.
         :param 'IngressBackendArgs' backend: backend defines the referenced service endpoint to which the traffic will be forwarded to.
-        :param str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
+        :param builtins.str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
                  done on a path element by element basis. A path element refers is the
                  list of labels in the path split by the '/' separator. A request is a
                  match for path p if every p is an element-wise prefix of p of the
@@ -105,7 +106,7 @@ class HTTPIngressPath(dict):
                  the IngressClass. Implementations can treat this as a separate PathType
                  or treat it identically to Prefix or Exact path types.
                Implementations are required to support all path types.
-        :param str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
+        :param builtins.str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
         """
         pulumi.set(__self__, "backend", backend)
         pulumi.set(__self__, "path_type", path_type)
@@ -122,7 +123,7 @@ class HTTPIngressPath(dict):
 
     @property
     @pulumi.getter(name="pathType")
-    def path_type(self) -> str:
+    def path_type(self) -> builtins.str:
         """
         pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
           done on a path element by element basis. A path element refers is the
@@ -140,7 +141,7 @@ class HTTPIngressPath(dict):
 
     @property
     @pulumi.getter
-    def path(self) -> Optional[str]:
+    def path(self) -> Optional[builtins.str]:
         """
         path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
         """
@@ -171,13 +172,13 @@ class HTTPIngressPathPatch(dict):
 
     def __init__(__self__, *,
                  backend: Optional['outputs.IngressBackendPatch'] = None,
-                 path: Optional[str] = None,
-                 path_type: Optional[str] = None):
+                 path: Optional[builtins.str] = None,
+                 path_type: Optional[builtins.str] = None):
         """
         HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.
         :param 'IngressBackendPatchArgs' backend: backend defines the referenced service endpoint to which the traffic will be forwarded to.
-        :param str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
-        :param str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
+        :param builtins.str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
+        :param builtins.str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
                  done on a path element by element basis. A path element refers is the
                  list of labels in the path split by the '/' separator. A request is a
                  match for path p if every p is an element-wise prefix of p of the
@@ -206,7 +207,7 @@ class HTTPIngressPathPatch(dict):
 
     @property
     @pulumi.getter
-    def path(self) -> Optional[str]:
+    def path(self) -> Optional[builtins.str]:
         """
         path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
         """
@@ -214,7 +215,7 @@ class HTTPIngressPathPatch(dict):
 
     @property
     @pulumi.getter(name="pathType")
-    def path_type(self) -> Optional[str]:
+    def path_type(self) -> Optional[builtins.str]:
         """
         pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
           done on a path element by element basis. A path element refers is the
@@ -299,12 +300,12 @@ class IPBlock(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 cidr: str,
-                 except_: Optional[Sequence[str]] = None):
+                 cidr: builtins.str,
+                 except_: Optional[Sequence[builtins.str]] = None):
         """
         IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.
-        :param str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
-        :param Sequence[str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
+        :param builtins.str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
+        :param Sequence[builtins.str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
         pulumi.set(__self__, "cidr", cidr)
         if except_ is not None:
@@ -312,7 +313,7 @@ class IPBlock(dict):
 
     @property
     @pulumi.getter
-    def cidr(self) -> str:
+    def cidr(self) -> builtins.str:
         """
         cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
         """
@@ -320,7 +321,7 @@ class IPBlock(dict):
 
     @property
     @pulumi.getter(name="except")
-    def except_(self) -> Optional[Sequence[str]]:
+    def except_(self) -> Optional[Sequence[builtins.str]]:
         """
         except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
@@ -350,12 +351,12 @@ class IPBlockPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 cidr: Optional[str] = None,
-                 except_: Optional[Sequence[str]] = None):
+                 cidr: Optional[builtins.str] = None,
+                 except_: Optional[Sequence[builtins.str]] = None):
         """
         IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.
-        :param str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
-        :param Sequence[str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
+        :param builtins.str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
+        :param Sequence[builtins.str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
         if cidr is not None:
             pulumi.set(__self__, "cidr", cidr)
@@ -364,7 +365,7 @@ class IPBlockPatch(dict):
 
     @property
     @pulumi.getter
-    def cidr(self) -> Optional[str]:
+    def cidr(self) -> Optional[builtins.str]:
         """
         cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
         """
@@ -372,7 +373,7 @@ class IPBlockPatch(dict):
 
     @property
     @pulumi.getter(name="except")
-    def except_(self) -> Optional[Sequence[str]]:
+    def except_(self) -> Optional[Sequence[builtins.str]]:
         """
         except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
@@ -416,8 +417,8 @@ class Ingress(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[str] = None,
-                 kind: Optional[str] = None,
+                 api_version: Optional[builtins.str] = None,
+                 kind: Optional[builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.IngressSpec'] = None,
                  status: Optional['outputs.IngressStatus'] = None):
@@ -437,8 +438,8 @@ class Ingress(dict):
         If the Ingress has not reached a Ready state after 10 minutes, it will
         time out and mark the resource update as Failed. You can override the default timeout value
         by setting the 'customTimeouts' option on the resource.
-        :param str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'IngressSpecArgs' spec: spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
         :param 'IngressStatusArgs' status: status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
@@ -456,7 +457,7 @@ class Ingress(dict):
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[str]:
+    def api_version(self) -> Optional[builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
@@ -464,7 +465,7 @@ class Ingress(dict):
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[str]:
+    def kind(self) -> Optional[builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
@@ -588,14 +589,14 @@ class IngressClass(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[str] = None,
-                 kind: Optional[str] = None,
+                 api_version: Optional[builtins.str] = None,
+                 kind: Optional[builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.IngressClassSpec'] = None):
         """
         IngressClass represents the class of the Ingress, referenced by the Ingress Spec. The `ingressclass.kubernetes.io/is-default-class` annotation can be used to indicate that an IngressClass should be considered default. When a single IngressClass resource has this annotation set to true, new Ingress resources without a class specified will be assigned this default class.
-        :param str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'IngressClassSpecArgs' spec: spec is the desired state of the IngressClass. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
         """
@@ -610,7 +611,7 @@ class IngressClass(dict):
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[str]:
+    def api_version(self) -> Optional[builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
@@ -618,7 +619,7 @@ class IngressClass(dict):
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[str]:
+    def kind(self) -> Optional[builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
@@ -664,18 +665,18 @@ class IngressClassParametersReference(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 kind: str,
-                 name: str,
-                 api_group: Optional[str] = None,
-                 namespace: Optional[str] = None,
-                 scope: Optional[str] = None):
+                 kind: builtins.str,
+                 name: builtins.str,
+                 api_group: Optional[builtins.str] = None,
+                 namespace: Optional[builtins.str] = None,
+                 scope: Optional[builtins.str] = None):
         """
         IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.
-        :param str kind: kind is the type of resource being referenced.
-        :param str name: name is the name of resource being referenced.
-        :param str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
-        :param str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
-        :param str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
+        :param builtins.str kind: kind is the type of resource being referenced.
+        :param builtins.str name: name is the name of resource being referenced.
+        :param builtins.str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
+        :param builtins.str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
+        :param builtins.str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
         pulumi.set(__self__, "kind", kind)
         pulumi.set(__self__, "name", name)
@@ -688,7 +689,7 @@ class IngressClassParametersReference(dict):
 
     @property
     @pulumi.getter
-    def kind(self) -> str:
+    def kind(self) -> builtins.str:
         """
         kind is the type of resource being referenced.
         """
@@ -696,7 +697,7 @@ class IngressClassParametersReference(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> str:
+    def name(self) -> builtins.str:
         """
         name is the name of resource being referenced.
         """
@@ -704,7 +705,7 @@ class IngressClassParametersReference(dict):
 
     @property
     @pulumi.getter(name="apiGroup")
-    def api_group(self) -> Optional[str]:
+    def api_group(self) -> Optional[builtins.str]:
         """
         apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
         """
@@ -712,7 +713,7 @@ class IngressClassParametersReference(dict):
 
     @property
     @pulumi.getter
-    def namespace(self) -> Optional[str]:
+    def namespace(self) -> Optional[builtins.str]:
         """
         namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
         """
@@ -720,7 +721,7 @@ class IngressClassParametersReference(dict):
 
     @property
     @pulumi.getter
-    def scope(self) -> Optional[str]:
+    def scope(self) -> Optional[builtins.str]:
         """
         scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
@@ -750,18 +751,18 @@ class IngressClassParametersReferencePatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_group: Optional[str] = None,
-                 kind: Optional[str] = None,
-                 name: Optional[str] = None,
-                 namespace: Optional[str] = None,
-                 scope: Optional[str] = None):
+                 api_group: Optional[builtins.str] = None,
+                 kind: Optional[builtins.str] = None,
+                 name: Optional[builtins.str] = None,
+                 namespace: Optional[builtins.str] = None,
+                 scope: Optional[builtins.str] = None):
         """
         IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.
-        :param str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
-        :param str kind: kind is the type of resource being referenced.
-        :param str name: name is the name of resource being referenced.
-        :param str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
-        :param str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
+        :param builtins.str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
+        :param builtins.str kind: kind is the type of resource being referenced.
+        :param builtins.str name: name is the name of resource being referenced.
+        :param builtins.str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
+        :param builtins.str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
         if api_group is not None:
             pulumi.set(__self__, "api_group", api_group)
@@ -776,7 +777,7 @@ class IngressClassParametersReferencePatch(dict):
 
     @property
     @pulumi.getter(name="apiGroup")
-    def api_group(self) -> Optional[str]:
+    def api_group(self) -> Optional[builtins.str]:
         """
         apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
         """
@@ -784,7 +785,7 @@ class IngressClassParametersReferencePatch(dict):
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[str]:
+    def kind(self) -> Optional[builtins.str]:
         """
         kind is the type of resource being referenced.
         """
@@ -792,7 +793,7 @@ class IngressClassParametersReferencePatch(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name is the name of resource being referenced.
         """
@@ -800,7 +801,7 @@ class IngressClassParametersReferencePatch(dict):
 
     @property
     @pulumi.getter
-    def namespace(self) -> Optional[str]:
+    def namespace(self) -> Optional[builtins.str]:
         """
         namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
         """
@@ -808,7 +809,7 @@ class IngressClassParametersReferencePatch(dict):
 
     @property
     @pulumi.getter
-    def scope(self) -> Optional[str]:
+    def scope(self) -> Optional[builtins.str]:
         """
         scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
@@ -821,11 +822,11 @@ class IngressClassSpec(dict):
     IngressClassSpec provides information about the class of an Ingress.
     """
     def __init__(__self__, *,
-                 controller: Optional[str] = None,
+                 controller: Optional[builtins.str] = None,
                  parameters: Optional['outputs.IngressClassParametersReference'] = None):
         """
         IngressClassSpec provides information about the class of an Ingress.
-        :param str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
+        :param builtins.str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         :param 'IngressClassParametersReferenceArgs' parameters: parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.
         """
         if controller is not None:
@@ -835,7 +836,7 @@ class IngressClassSpec(dict):
 
     @property
     @pulumi.getter
-    def controller(self) -> Optional[str]:
+    def controller(self) -> Optional[builtins.str]:
         """
         controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         """
@@ -856,11 +857,11 @@ class IngressClassSpecPatch(dict):
     IngressClassSpec provides information about the class of an Ingress.
     """
     def __init__(__self__, *,
-                 controller: Optional[str] = None,
+                 controller: Optional[builtins.str] = None,
                  parameters: Optional['outputs.IngressClassParametersReferencePatch'] = None):
         """
         IngressClassSpec provides information about the class of an Ingress.
-        :param str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
+        :param builtins.str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         :param 'IngressClassParametersReferencePatchArgs' parameters: parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.
         """
         if controller is not None:
@@ -870,7 +871,7 @@ class IngressClassSpecPatch(dict):
 
     @property
     @pulumi.getter
-    def controller(self) -> Optional[str]:
+    def controller(self) -> Optional[builtins.str]:
         """
         controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         """
@@ -891,13 +892,13 @@ class IngressLoadBalancerIngress(dict):
     IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
     """
     def __init__(__self__, *,
-                 hostname: Optional[str] = None,
-                 ip: Optional[str] = None,
+                 hostname: Optional[builtins.str] = None,
+                 ip: Optional[builtins.str] = None,
                  ports: Optional[Sequence['outputs.IngressPortStatus']] = None):
         """
         IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
-        :param str hostname: hostname is set for load-balancer ingress points that are DNS based.
-        :param str ip: ip is set for load-balancer ingress points that are IP based.
+        :param builtins.str hostname: hostname is set for load-balancer ingress points that are DNS based.
+        :param builtins.str ip: ip is set for load-balancer ingress points that are IP based.
         :param Sequence['IngressPortStatusArgs'] ports: ports provides information about the ports exposed by this LoadBalancer.
         """
         if hostname is not None:
@@ -909,7 +910,7 @@ class IngressLoadBalancerIngress(dict):
 
     @property
     @pulumi.getter
-    def hostname(self) -> Optional[str]:
+    def hostname(self) -> Optional[builtins.str]:
         """
         hostname is set for load-balancer ingress points that are DNS based.
         """
@@ -917,7 +918,7 @@ class IngressLoadBalancerIngress(dict):
 
     @property
     @pulumi.getter
-    def ip(self) -> Optional[str]:
+    def ip(self) -> Optional[builtins.str]:
         """
         ip is set for load-balancer ingress points that are IP based.
         """
@@ -938,13 +939,13 @@ class IngressLoadBalancerIngressPatch(dict):
     IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
     """
     def __init__(__self__, *,
-                 hostname: Optional[str] = None,
-                 ip: Optional[str] = None,
+                 hostname: Optional[builtins.str] = None,
+                 ip: Optional[builtins.str] = None,
                  ports: Optional[Sequence['outputs.IngressPortStatusPatch']] = None):
         """
         IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
-        :param str hostname: hostname is set for load-balancer ingress points that are DNS based.
-        :param str ip: ip is set for load-balancer ingress points that are IP based.
+        :param builtins.str hostname: hostname is set for load-balancer ingress points that are DNS based.
+        :param builtins.str ip: ip is set for load-balancer ingress points that are IP based.
         :param Sequence['IngressPortStatusPatchArgs'] ports: ports provides information about the ports exposed by this LoadBalancer.
         """
         if hostname is not None:
@@ -956,7 +957,7 @@ class IngressLoadBalancerIngressPatch(dict):
 
     @property
     @pulumi.getter
-    def hostname(self) -> Optional[str]:
+    def hostname(self) -> Optional[builtins.str]:
         """
         hostname is set for load-balancer ingress points that are DNS based.
         """
@@ -964,7 +965,7 @@ class IngressLoadBalancerIngressPatch(dict):
 
     @property
     @pulumi.getter
-    def ip(self) -> Optional[str]:
+    def ip(self) -> Optional[builtins.str]:
         """
         ip is set for load-balancer ingress points that are IP based.
         """
@@ -1031,14 +1032,14 @@ class IngressPortStatus(dict):
     IngressPortStatus represents the error condition of a service port
     """
     def __init__(__self__, *,
-                 port: int,
-                 protocol: str,
-                 error: Optional[str] = None):
+                 port: builtins.int,
+                 protocol: builtins.str,
+                 error: Optional[builtins.str] = None):
         """
         IngressPortStatus represents the error condition of a service port
-        :param int port: port is the port number of the ingress port.
-        :param str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
-        :param str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
+        :param builtins.int port: port is the port number of the ingress port.
+        :param builtins.str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
+        :param builtins.str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
                  CamelCase names
                - cloud provider specific error values must have names that comply with the
                  format foo.example.com/CamelCase.
@@ -1050,7 +1051,7 @@ class IngressPortStatus(dict):
 
     @property
     @pulumi.getter
-    def port(self) -> int:
+    def port(self) -> builtins.int:
         """
         port is the port number of the ingress port.
         """
@@ -1058,7 +1059,7 @@ class IngressPortStatus(dict):
 
     @property
     @pulumi.getter
-    def protocol(self) -> str:
+    def protocol(self) -> builtins.str:
         """
         protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
         """
@@ -1066,7 +1067,7 @@ class IngressPortStatus(dict):
 
     @property
     @pulumi.getter
-    def error(self) -> Optional[str]:
+    def error(self) -> Optional[builtins.str]:
         """
         error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
           CamelCase names
@@ -1082,17 +1083,17 @@ class IngressPortStatusPatch(dict):
     IngressPortStatus represents the error condition of a service port
     """
     def __init__(__self__, *,
-                 error: Optional[str] = None,
-                 port: Optional[int] = None,
-                 protocol: Optional[str] = None):
+                 error: Optional[builtins.str] = None,
+                 port: Optional[builtins.int] = None,
+                 protocol: Optional[builtins.str] = None):
         """
         IngressPortStatus represents the error condition of a service port
-        :param str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
+        :param builtins.str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
                  CamelCase names
                - cloud provider specific error values must have names that comply with the
                  format foo.example.com/CamelCase.
-        :param int port: port is the port number of the ingress port.
-        :param str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
+        :param builtins.int port: port is the port number of the ingress port.
+        :param builtins.str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
         """
         if error is not None:
             pulumi.set(__self__, "error", error)
@@ -1103,7 +1104,7 @@ class IngressPortStatusPatch(dict):
 
     @property
     @pulumi.getter
-    def error(self) -> Optional[str]:
+    def error(self) -> Optional[builtins.str]:
         """
         error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
           CamelCase names
@@ -1114,7 +1115,7 @@ class IngressPortStatusPatch(dict):
 
     @property
     @pulumi.getter
-    def port(self) -> Optional[int]:
+    def port(self) -> Optional[builtins.int]:
         """
         port is the port number of the ingress port.
         """
@@ -1122,7 +1123,7 @@ class IngressPortStatusPatch(dict):
 
     @property
     @pulumi.getter
-    def protocol(self) -> Optional[str]:
+    def protocol(self) -> Optional[builtins.str]:
         """
         protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
         """
@@ -1135,11 +1136,11 @@ class IngressRule(dict):
     IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
     """
     def __init__(__self__, *,
-                 host: Optional[str] = None,
+                 host: Optional[builtins.str] = None,
                  http: Optional['outputs.HTTPIngressRuleValue'] = None):
         """
         IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
-        :param str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
+        :param builtins.str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
                   the IP in the Spec of the parent Ingress.
                2. The `:` delimiter is not respected because ports are not allowed.
                	  Currently the port of an Ingress is implicitly :80 for http and
@@ -1155,7 +1156,7 @@ class IngressRule(dict):
 
     @property
     @pulumi.getter
-    def host(self) -> Optional[str]:
+    def host(self) -> Optional[builtins.str]:
         """
         host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
            the IP in the Spec of the parent Ingress.
@@ -1180,11 +1181,11 @@ class IngressRulePatch(dict):
     IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
     """
     def __init__(__self__, *,
-                 host: Optional[str] = None,
+                 host: Optional[builtins.str] = None,
                  http: Optional['outputs.HTTPIngressRuleValuePatch'] = None):
         """
         IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
-        :param str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
+        :param builtins.str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
                   the IP in the Spec of the parent Ingress.
                2. The `:` delimiter is not respected because ports are not allowed.
                	  Currently the port of an Ingress is implicitly :80 for http and
@@ -1200,7 +1201,7 @@ class IngressRulePatch(dict):
 
     @property
     @pulumi.getter
-    def host(self) -> Optional[str]:
+    def host(self) -> Optional[builtins.str]:
         """
         host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
            the IP in the Spec of the parent Ingress.
@@ -1225,11 +1226,11 @@ class IngressServiceBackend(dict):
     IngressServiceBackend references a Kubernetes Service as a Backend.
     """
     def __init__(__self__, *,
-                 name: str,
+                 name: builtins.str,
                  port: Optional['outputs.ServiceBackendPort'] = None):
         """
         IngressServiceBackend references a Kubernetes Service as a Backend.
-        :param str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
+        :param builtins.str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
         :param 'ServiceBackendPortArgs' port: port of the referenced service. A port name or port number is required for a IngressServiceBackend.
         """
         pulumi.set(__self__, "name", name)
@@ -1238,7 +1239,7 @@ class IngressServiceBackend(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> str:
+    def name(self) -> builtins.str:
         """
         name is the referenced service. The service must exist in the same namespace as the Ingress object.
         """
@@ -1259,11 +1260,11 @@ class IngressServiceBackendPatch(dict):
     IngressServiceBackend references a Kubernetes Service as a Backend.
     """
     def __init__(__self__, *,
-                 name: Optional[str] = None,
+                 name: Optional[builtins.str] = None,
                  port: Optional['outputs.ServiceBackendPortPatch'] = None):
         """
         IngressServiceBackend references a Kubernetes Service as a Backend.
-        :param str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
+        :param builtins.str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
         :param 'ServiceBackendPortPatchArgs' port: port of the referenced service. A port name or port number is required for a IngressServiceBackend.
         """
         if name is not None:
@@ -1273,7 +1274,7 @@ class IngressServiceBackendPatch(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name is the referenced service. The service must exist in the same namespace as the Ingress object.
         """
@@ -1314,13 +1315,13 @@ class IngressSpec(dict):
 
     def __init__(__self__, *,
                  default_backend: Optional['outputs.IngressBackend'] = None,
-                 ingress_class_name: Optional[str] = None,
+                 ingress_class_name: Optional[builtins.str] = None,
                  rules: Optional[Sequence['outputs.IngressRule']] = None,
                  tls: Optional[Sequence['outputs.IngressTLS']] = None):
         """
         IngressSpec describes the Ingress the user wishes to exist.
         :param 'IngressBackendArgs' default_backend: defaultBackend is the backend that should handle requests that don't match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
-        :param str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
+        :param builtins.str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         :param Sequence['IngressRuleArgs'] rules: rules is a list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
         :param Sequence['IngressTLSArgs'] tls: tls represents the TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
         """
@@ -1343,7 +1344,7 @@ class IngressSpec(dict):
 
     @property
     @pulumi.getter(name="ingressClassName")
-    def ingress_class_name(self) -> Optional[str]:
+    def ingress_class_name(self) -> Optional[builtins.str]:
         """
         ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         """
@@ -1392,13 +1393,13 @@ class IngressSpecPatch(dict):
 
     def __init__(__self__, *,
                  default_backend: Optional['outputs.IngressBackendPatch'] = None,
-                 ingress_class_name: Optional[str] = None,
+                 ingress_class_name: Optional[builtins.str] = None,
                  rules: Optional[Sequence['outputs.IngressRulePatch']] = None,
                  tls: Optional[Sequence['outputs.IngressTLSPatch']] = None):
         """
         IngressSpec describes the Ingress the user wishes to exist.
         :param 'IngressBackendPatchArgs' default_backend: defaultBackend is the backend that should handle requests that don't match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
-        :param str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
+        :param builtins.str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         :param Sequence['IngressRulePatchArgs'] rules: rules is a list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
         :param Sequence['IngressTLSPatchArgs'] tls: tls represents the TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
         """
@@ -1421,7 +1422,7 @@ class IngressSpecPatch(dict):
 
     @property
     @pulumi.getter(name="ingressClassName")
-    def ingress_class_name(self) -> Optional[str]:
+    def ingress_class_name(self) -> Optional[builtins.str]:
         """
         ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         """
@@ -1547,12 +1548,12 @@ class IngressTLS(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 hosts: Optional[Sequence[str]] = None,
-                 secret_name: Optional[str] = None):
+                 hosts: Optional[Sequence[builtins.str]] = None,
+                 secret_name: Optional[builtins.str] = None):
         """
         IngressTLS describes the transport layer security associated with an ingress.
-        :param Sequence[str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
-        :param str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
+        :param Sequence[builtins.str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
+        :param builtins.str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
         if hosts is not None:
             pulumi.set(__self__, "hosts", hosts)
@@ -1561,7 +1562,7 @@ class IngressTLS(dict):
 
     @property
     @pulumi.getter
-    def hosts(self) -> Optional[Sequence[str]]:
+    def hosts(self) -> Optional[Sequence[builtins.str]]:
         """
         hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
         """
@@ -1569,7 +1570,7 @@ class IngressTLS(dict):
 
     @property
     @pulumi.getter(name="secretName")
-    def secret_name(self) -> Optional[str]:
+    def secret_name(self) -> Optional[builtins.str]:
         """
         secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
@@ -1599,12 +1600,12 @@ class IngressTLSPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 hosts: Optional[Sequence[str]] = None,
-                 secret_name: Optional[str] = None):
+                 hosts: Optional[Sequence[builtins.str]] = None,
+                 secret_name: Optional[builtins.str] = None):
         """
         IngressTLS describes the transport layer security associated with an ingress.
-        :param Sequence[str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
-        :param str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
+        :param Sequence[builtins.str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
+        :param builtins.str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
         if hosts is not None:
             pulumi.set(__self__, "hosts", hosts)
@@ -1613,7 +1614,7 @@ class IngressTLSPatch(dict):
 
     @property
     @pulumi.getter
-    def hosts(self) -> Optional[Sequence[str]]:
+    def hosts(self) -> Optional[Sequence[builtins.str]]:
         """
         hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
         """
@@ -1621,7 +1622,7 @@ class IngressTLSPatch(dict):
 
     @property
     @pulumi.getter(name="secretName")
-    def secret_name(self) -> Optional[str]:
+    def secret_name(self) -> Optional[builtins.str]:
         """
         secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
@@ -1651,15 +1652,15 @@ class NetworkPolicy(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[str] = None,
-                 kind: Optional[str] = None,
+                 api_version: Optional[builtins.str] = None,
+                 kind: Optional[builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.NetworkPolicySpec'] = None,
                  status: Optional['outputs.NetworkPolicyStatus'] = None):
         """
         NetworkPolicy describes what network traffic is allowed for a set of Pods
-        :param str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'NetworkPolicySpecArgs' spec: spec represents the specification of the desired behavior for this NetworkPolicy.
         :param 'NetworkPolicyStatusArgs' status: Status is the current state of the NetworkPolicy. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
@@ -1677,7 +1678,7 @@ class NetworkPolicy(dict):
 
     @property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[str]:
+    def api_version(self) -> Optional[builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
@@ -1685,7 +1686,7 @@ class NetworkPolicy(dict):
 
     @property
     @pulumi.getter
-    def kind(self) -> Optional[str]:
+    def kind(self) -> Optional[builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
@@ -2065,14 +2066,14 @@ class NetworkPolicyPort(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 end_port: Optional[int] = None,
+                 end_port: Optional[builtins.int] = None,
                  port: Optional[Any] = None,
-                 protocol: Optional[str] = None):
+                 protocol: Optional[builtins.str] = None):
         """
         NetworkPolicyPort describes a port to allow traffic on
-        :param int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
-        :param Union[int, str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
-        :param str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
+        :param builtins.int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
+        :param Union[builtins.int, builtins.str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
+        :param builtins.str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
         if end_port is not None:
             pulumi.set(__self__, "end_port", end_port)
@@ -2083,7 +2084,7 @@ class NetworkPolicyPort(dict):
 
     @property
     @pulumi.getter(name="endPort")
-    def end_port(self) -> Optional[int]:
+    def end_port(self) -> Optional[builtins.int]:
         """
         endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
         """
@@ -2099,7 +2100,7 @@ class NetworkPolicyPort(dict):
 
     @property
     @pulumi.getter
-    def protocol(self) -> Optional[str]:
+    def protocol(self) -> Optional[builtins.str]:
         """
         protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
@@ -2129,14 +2130,14 @@ class NetworkPolicyPortPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 end_port: Optional[int] = None,
+                 end_port: Optional[builtins.int] = None,
                  port: Optional[Any] = None,
-                 protocol: Optional[str] = None):
+                 protocol: Optional[builtins.str] = None):
         """
         NetworkPolicyPort describes a port to allow traffic on
-        :param int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
-        :param Union[int, str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
-        :param str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
+        :param builtins.int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
+        :param Union[builtins.int, builtins.str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
+        :param builtins.str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
         if end_port is not None:
             pulumi.set(__self__, "end_port", end_port)
@@ -2147,7 +2148,7 @@ class NetworkPolicyPortPatch(dict):
 
     @property
     @pulumi.getter(name="endPort")
-    def end_port(self) -> Optional[int]:
+    def end_port(self) -> Optional[builtins.int]:
         """
         endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
         """
@@ -2163,7 +2164,7 @@ class NetworkPolicyPortPatch(dict):
 
     @property
     @pulumi.getter
-    def protocol(self) -> Optional[str]:
+    def protocol(self) -> Optional[builtins.str]:
         """
         protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
@@ -2198,13 +2199,13 @@ class NetworkPolicySpec(dict):
                  pod_selector: '_meta.v1.outputs.LabelSelector',
                  egress: Optional[Sequence['outputs.NetworkPolicyEgressRule']] = None,
                  ingress: Optional[Sequence['outputs.NetworkPolicyIngressRule']] = None,
-                 policy_types: Optional[Sequence[str]] = None):
+                 policy_types: Optional[Sequence[builtins.str]] = None):
         """
         NetworkPolicySpec provides the specification of a NetworkPolicy
         :param '_meta.v1.LabelSelectorArgs' pod_selector: podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.
         :param Sequence['NetworkPolicyEgressRuleArgs'] egress: egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8
         :param Sequence['NetworkPolicyIngressRuleArgs'] ingress: ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)
-        :param Sequence[str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
+        :param Sequence[builtins.str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
         pulumi.set(__self__, "pod_selector", pod_selector)
         if egress is not None:
@@ -2240,7 +2241,7 @@ class NetworkPolicySpec(dict):
 
     @property
     @pulumi.getter(name="policyTypes")
-    def policy_types(self) -> Optional[Sequence[str]]:
+    def policy_types(self) -> Optional[Sequence[builtins.str]]:
         """
         policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
@@ -2275,13 +2276,13 @@ class NetworkPolicySpecPatch(dict):
                  egress: Optional[Sequence['outputs.NetworkPolicyEgressRulePatch']] = None,
                  ingress: Optional[Sequence['outputs.NetworkPolicyIngressRulePatch']] = None,
                  pod_selector: Optional['_meta.v1.outputs.LabelSelectorPatch'] = None,
-                 policy_types: Optional[Sequence[str]] = None):
+                 policy_types: Optional[Sequence[builtins.str]] = None):
         """
         NetworkPolicySpec provides the specification of a NetworkPolicy
         :param Sequence['NetworkPolicyEgressRulePatchArgs'] egress: egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8
         :param Sequence['NetworkPolicyIngressRulePatchArgs'] ingress: ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)
         :param '_meta.v1.LabelSelectorPatchArgs' pod_selector: podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.
-        :param Sequence[str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
+        :param Sequence[builtins.str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
         if egress is not None:
             pulumi.set(__self__, "egress", egress)
@@ -2318,7 +2319,7 @@ class NetworkPolicySpecPatch(dict):
 
     @property
     @pulumi.getter(name="policyTypes")
-    def policy_types(self) -> Optional[Sequence[str]]:
+    def policy_types(self) -> Optional[Sequence[builtins.str]]:
         """
         policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
@@ -2377,12 +2378,12 @@ class ServiceBackendPort(dict):
     ServiceBackendPort is the service port being referenced.
     """
     def __init__(__self__, *,
-                 name: Optional[str] = None,
-                 number: Optional[int] = None):
+                 name: Optional[builtins.str] = None,
+                 number: Optional[builtins.int] = None):
         """
         ServiceBackendPort is the service port being referenced.
-        :param str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
-        :param int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
+        :param builtins.str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
+        :param builtins.int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
         if name is not None:
             pulumi.set(__self__, "name", name)
@@ -2391,7 +2392,7 @@ class ServiceBackendPort(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
         """
@@ -2399,7 +2400,7 @@ class ServiceBackendPort(dict):
 
     @property
     @pulumi.getter
-    def number(self) -> Optional[int]:
+    def number(self) -> Optional[builtins.int]:
         """
         number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
@@ -2412,12 +2413,12 @@ class ServiceBackendPortPatch(dict):
     ServiceBackendPort is the service port being referenced.
     """
     def __init__(__self__, *,
-                 name: Optional[str] = None,
-                 number: Optional[int] = None):
+                 name: Optional[builtins.str] = None,
+                 number: Optional[builtins.int] = None):
         """
         ServiceBackendPort is the service port being referenced.
-        :param str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
-        :param int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
+        :param builtins.str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
+        :param builtins.int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
         if name is not None:
             pulumi.set(__self__, "name", name)
@@ -2426,7 +2427,7 @@ class ServiceBackendPortPatch(dict):
 
     @property
     @pulumi.getter
-    def name(self) -> Optional[str]:
+    def name(self) -> Optional[builtins.str]:
         """
         name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
         """
@@ -2434,7 +2435,7 @@ class ServiceBackendPortPatch(dict):
 
     @property
     @pulumi.getter
-    def number(self) -> Optional[int]:
+    def number(self) -> Optional[builtins.int]:
         """
         number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """