pulumi-gcp 8.29.0a1746082034__py3-none-any.whl → 8.29.0a1746140206__py3-none-any.whl

pulumi_gcp/compute/resource_policy_attachment.py

@@ -181,6 +181,9 @@ class _ResourcePolicyAttachmentState:
 
 
 class ResourcePolicyAttachment(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/resourcePolicyAttachment:ResourcePolicyAttachment"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/route.py

@@ -824,6 +824,9 @@ class _RouteState:
 
 
 class Route(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/route:Route"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/router.py

@@ -371,6 +371,9 @@ class _RouterState:
 
 
 class Router(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/router:Router"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/router_interface.py

@@ -449,6 +449,9 @@ class _RouterInterfaceState:
 
 
 class RouterInterface(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/routerInterface:RouterInterface"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/router_nat.py

@@ -998,6 +998,9 @@ class _RouterNatState:
 
 
 class RouterNat(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/routerNat:RouterNat"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/router_nat_address.py

@@ -247,6 +247,9 @@ class _RouterNatAddressState:
 
 
 class RouterNatAddress(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/routerNatAddress:RouterNatAddress"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/router_peer.py

@@ -1217,6 +1217,9 @@ class _RouterPeerState:
 
 
 class RouterPeer(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/routerPeer:RouterPeer"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/router_route_policy.py

@@ -244,6 +244,9 @@ class _RouterRoutePolicyState:
 
 
 class RouterRoutePolicy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/routerRoutePolicy:RouterRoutePolicy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/security_policy.py

@@ -376,6 +376,9 @@ class _SecurityPolicyState:
 
 
 class SecurityPolicy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/securityPolicy:SecurityPolicy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/security_policy_rule.py

@@ -457,6 +457,9 @@ class _SecurityPolicyRuleState:
 
 
 class SecurityPolicyRule(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/securityPolicyRule:SecurityPolicyRule"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/security_scan_config.py

@@ -428,6 +428,9 @@ class _SecurityScanConfigState:
 
 
 class SecurityScanConfig(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/securityScanConfig:SecurityScanConfig"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/service_attachment.py

@@ -598,6 +598,9 @@ class _ServiceAttachmentState:
 
 
 class ServiceAttachment(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/serviceAttachment:ServiceAttachment"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/shared_vpc_host_project.py

@@ -65,6 +65,9 @@ class _SharedVPCHostProjectState:
 
 
 class SharedVPCHostProject(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/sharedVPCHostProject:SharedVPCHostProject"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/shared_vpc_service_project.py

@@ -128,6 +128,9 @@ class _SharedVPCServiceProjectState:
 
 
 class SharedVPCServiceProject(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/sharedVPCServiceProject:SharedVPCServiceProject"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/snapshot.py

@@ -633,6 +633,9 @@ class _SnapshotState:
 
 
 class Snapshot(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/snapshot:Snapshot"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/snapshot_iam_binding.py

@@ -254,6 +254,9 @@ class _SnapshotIamBindingState:
 
 
 class SnapshotIamBinding(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/snapshotIamBinding:SnapshotIamBinding"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/snapshot_iam_member.py

@@ -254,6 +254,9 @@ class _SnapshotIamMemberState:
 
 
 class SnapshotIamMember(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/snapshotIamMember:SnapshotIamMember"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/snapshot_iam_policy.py

@@ -153,6 +153,9 @@ class _SnapshotIamPolicyState:
 
 
 class SnapshotIamPolicy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/snapshotIamPolicy:SnapshotIamPolicy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/ssl_certificate.py

@@ -376,6 +376,9 @@ class _SSLCertificateState:
 
 
 class SSLCertificate(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/sSLCertificate:SSLCertificate"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/ssl_policy.py

@@ -408,6 +408,9 @@ class _SSLPolicyState:
 
 
 class SSLPolicy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/sSLPolicy:SSLPolicy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/storage_pool.py

@@ -535,6 +535,9 @@ class _StoragePoolState:
 
 
 class StoragePool(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/storagePool:StoragePool"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/storage_pool_iam_binding.py

@@ -306,6 +306,9 @@ class _StoragePoolIamBindingState:
 
 
 class StoragePoolIamBinding(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/storagePoolIamBinding:StoragePoolIamBinding"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/storage_pool_iam_member.py

@@ -306,6 +306,9 @@ class _StoragePoolIamMemberState:
 
 
 class StoragePoolIamMember(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/storagePoolIamMember:StoragePoolIamMember"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/storage_pool_iam_policy.py

@@ -193,6 +193,9 @@ class _StoragePoolIamPolicyState:
 
 
 class StoragePoolIamPolicy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/storagePoolIamPolicy:StoragePoolIamPolicy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/subnetwork.py

@@ -1111,6 +1111,9 @@ class _SubnetworkState:
 
 
 class Subnetwork(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/subnetwork:Subnetwork"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/subnetwork_iam_binding.py

@@ -309,6 +309,9 @@ class _SubnetworkIAMBindingState:
 
 
 class SubnetworkIAMBinding(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/subnetworkIAMBinding:SubnetworkIAMBinding"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/subnetwork_iam_member.py

@@ -309,6 +309,9 @@ class _SubnetworkIAMMemberState:
 
 
 class SubnetworkIAMMember(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/subnetworkIAMMember:SubnetworkIAMMember"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/subnetwork_iam_policy.py

@@ -196,6 +196,9 @@ class _SubnetworkIAMPolicyState:
 
 
 class SubnetworkIAMPolicy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/subnetworkIAMPolicy:SubnetworkIAMPolicy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_grpc_proxy.py

@@ -354,6 +354,9 @@ class _TargetGrpcProxyState:
 
 
 class TargetGrpcProxy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetGrpcProxy:TargetGrpcProxy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_http_proxy.py

@@ -353,6 +353,9 @@ class _TargetHttpProxyState:
 
 
 class TargetHttpProxy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetHttpProxy:TargetHttpProxy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_https_proxy.py

@@ -705,6 +705,9 @@ class _TargetHttpsProxyState:
 
 
 class TargetHttpsProxy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetHttpsProxy:TargetHttpsProxy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_instance.py

@@ -393,6 +393,9 @@ class _TargetInstanceState:
 
 
 class TargetInstance(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetInstance:TargetInstance"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_pool.py

@@ -426,6 +426,9 @@ class _TargetPoolState:
 
 
 class TargetPool(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetPool:TargetPool"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_ssl_proxy.py

@@ -413,6 +413,9 @@ class _TargetSSLProxyState:
 
 
 class TargetSSLProxy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetSSLProxy:TargetSSLProxy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/target_tcp_proxy.py

@@ -329,6 +329,9 @@ class _TargetTCPProxyState:
 
 
 class TargetTCPProxy(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/targetTCPProxy:TargetTCPProxy"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/url_map.py

@@ -590,6 +590,9 @@ class _URLMapState:
 
 
 class URLMap(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/uRLMap:URLMap"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/vpn_gateway.py

@@ -281,6 +281,9 @@ class _VPNGatewayState:
 
 
 class VPNGateway(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/vPNGateway:VPNGateway"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/compute/vpn_tunnel.py

@@ -821,6 +821,9 @@ class _VPNTunnelState:
 
 
 class VPNTunnel(pulumi.CustomResource):
+
+    pulumi_type = "gcp:compute/vPNTunnel:VPNTunnel"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/container/_inputs.py

@@ -9927,17 +9927,25 @@ if not MYPY:
         """
         Number of local SSDs to use to back ephemeral storage. Uses NVMe interfaces. Each local SSD is 375 GB in size. If zero, it means to disable using local SSDs as ephemeral storage.
         """
+        data_cache_count: NotRequired[pulumi.Input[builtins.int]]
+        """
+        Number of raw-block local NVMe SSD disks to be attached to the node utilized for GKE Data Cache. If zero, then GKE Data Cache will not be enabled in the nodes.
+        """
 elif False:
     ClusterNodeConfigEphemeralStorageLocalSsdConfigArgsDict: TypeAlias = Mapping[str, Any]
 
 @pulumi.input_type
 class ClusterNodeConfigEphemeralStorageLocalSsdConfigArgs:
     def __init__(__self__, *,
-                 local_ssd_count: pulumi.Input[builtins.int]):
+                 local_ssd_count: pulumi.Input[builtins.int],
+                 data_cache_count: Optional[pulumi.Input[builtins.int]] = None):
         """
         :param pulumi.Input[builtins.int] local_ssd_count: Number of local SSDs to use to back ephemeral storage. Uses NVMe interfaces. Each local SSD is 375 GB in size. If zero, it means to disable using local SSDs as ephemeral storage.
+        :param pulumi.Input[builtins.int] data_cache_count: Number of raw-block local NVMe SSD disks to be attached to the node utilized for GKE Data Cache. If zero, then GKE Data Cache will not be enabled in the nodes.
         """
         pulumi.set(__self__, "local_ssd_count", local_ssd_count)
+        if data_cache_count is not None:
+            pulumi.set(__self__, "data_cache_count", data_cache_count)
 
     @property
     @pulumi.getter(name="localSsdCount")
@@ -9951,6 +9959,18 @@ class ClusterNodeConfigEphemeralStorageLocalSsdConfigArgs:
     def local_ssd_count(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "local_ssd_count", value)
 
+    @property
+    @pulumi.getter(name="dataCacheCount")
+    def data_cache_count(self) -> Optional[pulumi.Input[builtins.int]]:
+        """
+        Number of raw-block local NVMe SSD disks to be attached to the node utilized for GKE Data Cache. If zero, then GKE Data Cache will not be enabled in the nodes.
+        """
+        return pulumi.get(self, "data_cache_count")
+
+    @data_cache_count.setter
+    def data_cache_count(self, value: Optional[pulumi.Input[builtins.int]]):
+        pulumi.set(self, "data_cache_count", value)
+
 
 if not MYPY:
     class ClusterNodeConfigFastSocketArgsDict(TypedDict):
@@ -10130,7 +10150,7 @@ if not MYPY:
         """
         Mode for how the GPU driver is installed.
         Accepted values are:
-        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to not install any GPU driver.
+        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to install the "Default" GPU driver. Before GKE `1.30.1-gke.1156000`, the default value is to not install any GPU driver.
         * `"INSTALLATION_DISABLED"`: Disable GPU driver auto installation and needs manual installation.
         * `"DEFAULT"`: "Default" GPU driver in COS and Ubuntu.
         * `"LATEST"`: "Latest" GPU driver in COS.
@@ -10145,7 +10165,7 @@ class ClusterNodeConfigGuestAcceleratorGpuDriverInstallationConfigArgs:
         """
         :param pulumi.Input[builtins.str] gpu_driver_version: Mode for how the GPU driver is installed.
                Accepted values are:
-               * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to not install any GPU driver.
+               * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to install the "Default" GPU driver. Before GKE `1.30.1-gke.1156000`, the default value is to not install any GPU driver.
                * `"INSTALLATION_DISABLED"`: Disable GPU driver auto installation and needs manual installation.
                * `"DEFAULT"`: "Default" GPU driver in COS and Ubuntu.
                * `"LATEST"`: "Latest" GPU driver in COS.
@@ -10158,7 +10178,7 @@ class ClusterNodeConfigGuestAcceleratorGpuDriverInstallationConfigArgs:
         """
         Mode for how the GPU driver is installed.
         Accepted values are:
-        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to not install any GPU driver.
+        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to install the "Default" GPU driver. Before GKE `1.30.1-gke.1156000`, the default value is to not install any GPU driver.
         * `"INSTALLATION_DISABLED"`: Disable GPU driver auto installation and needs manual installation.
         * `"DEFAULT"`: "Default" GPU driver in COS and Ubuntu.
         * `"LATEST"`: "Latest" GPU driver in COS.
@@ -14161,17 +14181,25 @@ if not MYPY:
         """
         Number of local SSDs to use to back ephemeral storage. Uses NVMe interfaces. Each local SSD is 375 GB in size. If zero, it means to disable using local SSDs as ephemeral storage.
         """
+        data_cache_count: NotRequired[pulumi.Input[builtins.int]]
+        """
+        Number of raw-block local NVMe SSD disks to be attached to the node utilized for GKE Data Cache. If zero, then GKE Data Cache will not be enabled in the nodes.
+        """
 elif False:
     ClusterNodePoolNodeConfigEphemeralStorageLocalSsdConfigArgsDict: TypeAlias = Mapping[str, Any]
 
 @pulumi.input_type
 class ClusterNodePoolNodeConfigEphemeralStorageLocalSsdConfigArgs:
     def __init__(__self__, *,
-                 local_ssd_count: pulumi.Input[builtins.int]):
+                 local_ssd_count: pulumi.Input[builtins.int],
+                 data_cache_count: Optional[pulumi.Input[builtins.int]] = None):
         """
         :param pulumi.Input[builtins.int] local_ssd_count: Number of local SSDs to use to back ephemeral storage. Uses NVMe interfaces. Each local SSD is 375 GB in size. If zero, it means to disable using local SSDs as ephemeral storage.
+        :param pulumi.Input[builtins.int] data_cache_count: Number of raw-block local NVMe SSD disks to be attached to the node utilized for GKE Data Cache. If zero, then GKE Data Cache will not be enabled in the nodes.
         """
         pulumi.set(__self__, "local_ssd_count", local_ssd_count)
+        if data_cache_count is not None:
+            pulumi.set(__self__, "data_cache_count", data_cache_count)
 
     @property
     @pulumi.getter(name="localSsdCount")
@@ -14185,6 +14213,18 @@ class ClusterNodePoolNodeConfigEphemeralStorageLocalSsdConfigArgs:
     def local_ssd_count(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "local_ssd_count", value)
 
+    @property
+    @pulumi.getter(name="dataCacheCount")
+    def data_cache_count(self) -> Optional[pulumi.Input[builtins.int]]:
+        """
+        Number of raw-block local NVMe SSD disks to be attached to the node utilized for GKE Data Cache. If zero, then GKE Data Cache will not be enabled in the nodes.
+        """
+        return pulumi.get(self, "data_cache_count")
+
+    @data_cache_count.setter
+    def data_cache_count(self, value: Optional[pulumi.Input[builtins.int]]):
+        pulumi.set(self, "data_cache_count", value)
+
 
 if not MYPY:
     class ClusterNodePoolNodeConfigFastSocketArgsDict(TypedDict):
@@ -14364,7 +14404,7 @@ if not MYPY:
         """
         Mode for how the GPU driver is installed.
         Accepted values are:
-        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to not install any GPU driver.
+        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to install the "Default" GPU driver. Before GKE `1.30.1-gke.1156000`, the default value is to not install any GPU driver.
         * `"INSTALLATION_DISABLED"`: Disable GPU driver auto installation and needs manual installation.
         * `"DEFAULT"`: "Default" GPU driver in COS and Ubuntu.
         * `"LATEST"`: "Latest" GPU driver in COS.
@@ -14379,7 +14419,7 @@ class ClusterNodePoolNodeConfigGuestAcceleratorGpuDriverInstallationConfigArgs:
         """
         :param pulumi.Input[builtins.str] gpu_driver_version: Mode for how the GPU driver is installed.
                Accepted values are:
-               * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to not install any GPU driver.
+               * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to install the "Default" GPU driver. Before GKE `1.30.1-gke.1156000`, the default value is to not install any GPU driver.
                * `"INSTALLATION_DISABLED"`: Disable GPU driver auto installation and needs manual installation.
                * `"DEFAULT"`: "Default" GPU driver in COS and Ubuntu.
                * `"LATEST"`: "Latest" GPU driver in COS.
@@ -14392,7 +14432,7 @@ class ClusterNodePoolNodeConfigGuestAcceleratorGpuDriverInstallationConfigArgs:
         """
         Mode for how the GPU driver is installed.
         Accepted values are:
-        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to not install any GPU driver.
+        * `"GPU_DRIVER_VERSION_UNSPECIFIED"`: Default value is to install the "Default" GPU driver. Before GKE `1.30.1-gke.1156000`, the default value is to not install any GPU driver.
         * `"INSTALLATION_DISABLED"`: Disable GPU driver auto installation and needs manual installation.
         * `"DEFAULT"`: "Default" GPU driver in COS and Ubuntu.
         * `"LATEST"`: "Latest" GPU driver in COS.
@@ -18810,17 +18850,25 @@ if not MYPY:
         """
         Number of local SSDs to use to back ephemeral storage. Uses NVMe interfaces. Each local SSD must be 375 or 3000 GB in size, and all local SSDs must share the same size.
         """
+        data_cache_count: NotRequired[pulumi.Input[builtins.int]]
+        """
+        Number of local SSDs to be utilized for GKE Data Cache. Uses NVMe interfaces.
+        """
 elif False:
     NodePoolNodeConfigEphemeralStorageLocalSsdConfigArgsDict: TypeAlias = Mapping[str, Any]
 
 @pulumi.input_type
 class NodePoolNodeConfigEphemeralStorageLocalSsdConfigArgs:
     def __init__(__self__, *,
-                 local_ssd_count: pulumi.Input[builtins.int]):
+                 local_ssd_count: pulumi.Input[builtins.int],
+                 data_cache_count: Optional[pulumi.Input[builtins.int]] = None):
         """
         :param pulumi.Input[builtins.int] local_ssd_count: Number of local SSDs to use to back ephemeral storage. Uses NVMe interfaces. Each local SSD must be 375 or 3000 GB in size, and all local SSDs must share the same size.
+        :param pulumi.Input[builtins.int] data_cache_count: Number of local SSDs to be utilized for GKE Data Cache. Uses NVMe interfaces.
         """
         pulumi.set(__self__, "local_ssd_count", local_ssd_count)
+        if data_cache_count is not None:
+            pulumi.set(__self__, "data_cache_count", data_cache_count)
 
     @property
     @pulumi.getter(name="localSsdCount")
@@ -18834,6 +18882,18 @@ class NodePoolNodeConfigEphemeralStorageLocalSsdConfigArgs:
     def local_ssd_count(self, value: pulumi.Input[builtins.int]):
         pulumi.set(self, "local_ssd_count", value)
 
+    @property
+    @pulumi.getter(name="dataCacheCount")
+    def data_cache_count(self) -> Optional[pulumi.Input[builtins.int]]:
+        """
+        Number of local SSDs to be utilized for GKE Data Cache. Uses NVMe interfaces.
+        """
+        return pulumi.get(self, "data_cache_count")
+
+    @data_cache_count.setter
+    def data_cache_count(self, value: Optional[pulumi.Input[builtins.int]]):
+        pulumi.set(self, "data_cache_count", value)
+
 
 if not MYPY:
     class NodePoolNodeConfigFastSocketArgsDict(TypedDict):

pulumi_gcp/container/attached_cluster.py

@@ -779,6 +779,9 @@ class _AttachedClusterState:
 
 
 class AttachedCluster(pulumi.CustomResource):
+
+    pulumi_type = "gcp:container/attachedCluster:AttachedCluster"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/container/aws_cluster.py

@@ -574,6 +574,9 @@ class _AwsClusterState:
 
 
 class AwsCluster(pulumi.CustomResource):
+
+    pulumi_type = "gcp:container/awsCluster:AwsCluster"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/container/aws_node_pool.py

@@ -573,6 +573,9 @@ class _AwsNodePoolState:
 
 
 class AwsNodePool(pulumi.CustomResource):
+
+    pulumi_type = "gcp:container/awsNodePool:AwsNodePool"
+
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_gcp/container/azure_client.py

@@ -255,6 +255,9 @@ class _AzureClientState:
 
 
 class AzureClient(pulumi.CustomResource):
+
+    pulumi_type = "gcp:container/azureClient:AzureClient"
+
     @overload
     def __init__(__self__,
                  resource_name: str,