pulumi-gcp 8.15.0a1737095291__py3-none-any.whl → 8.15.0a1737577694__py3-none-any.whl

pulumi_gcp/compute/_inputs.py

@@ -16707,7 +16707,7 @@ if not MYPY:
         """
         stack_type: NotRequired[pulumi.Input[str]]
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         subnetwork: NotRequired[pulumi.Input[str]]
         """
@@ -16771,7 +16771,7 @@ class InstanceNetworkInterfaceArgs:
         :param pulumi.Input[str] nic_type: The type of vNIC to be used on this interface. Possible values: GVNIC, VIRTIO_NET, IDPF. In the beta provider the additional values of MRDMA and IRDMA are supported.
         :param pulumi.Input[int] queue_count: The networking queue count that's specified by users for the network interface. Both Rx and Tx queues will be set to this number. It will be empty if not specified.
         :param pulumi.Input[str] security_policy: A full or partial URL to a security policy to add to this instance. If this field is set to an empty string it will remove the associated security policy.
-        :param pulumi.Input[str] stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        :param pulumi.Input[str] stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         :param pulumi.Input[str] subnetwork: The name or self_link of the subnetwork to attach this
                interface to. Either `network` or `subnetwork` must be provided. If network isn't provided
                it will be inferred from the subnetwork. The subnetwork must exist in the same region this
@@ -16986,7 +16986,7 @@ class InstanceNetworkInterfaceArgs:
     @pulumi.getter(name="stackType")
     def stack_type(self) -> Optional[pulumi.Input[str]]:
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         return pulumi.get(self, "stack_type")
 
@@ -19290,7 +19290,7 @@ if not MYPY:
         """
         stack_type: NotRequired[pulumi.Input[str]]
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         subnetwork: NotRequired[pulumi.Input[str]]
         """
@@ -19350,7 +19350,7 @@ class InstanceTemplateNetworkInterfaceArgs:
                empty, the address will be automatically assigned.
         :param pulumi.Input[str] nic_type: The type of vNIC to be used on this interface. Possible values: GVNIC, VIRTIO_NET. In the beta provider the additional values of MRDMA and IRDMA are supported.
         :param pulumi.Input[int] queue_count: The networking queue count that's specified by users for the network interface. Both Rx and Tx queues will be set to this number. It will be empty if not specified.
-        :param pulumi.Input[str] stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        :param pulumi.Input[str] stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         :param pulumi.Input[str] subnetwork: the name of the subnetwork to attach this interface
                to. The subnetwork must exist in the same `region` this instance will be
                created in. Either `network` or `subnetwork` must be provided.
@@ -19549,7 +19549,7 @@ class InstanceTemplateNetworkInterfaceArgs:
     @pulumi.getter(name="stackType")
     def stack_type(self) -> Optional[pulumi.Input[str]]:
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         return pulumi.get(self, "stack_type")
 
@@ -32902,7 +32902,7 @@ if not MYPY:
         """
         stack_type: NotRequired[pulumi.Input[str]]
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         subnetwork: NotRequired[pulumi.Input[str]]
         """
@@ -32953,7 +32953,7 @@ class RegionInstanceTemplateNetworkInterfaceArgs:
                empty, the address will be automatically assigned.
         :param pulumi.Input[str] nic_type: The type of vNIC to be used on this interface. Possible values: GVNIC, VIRTIO_NET. In the beta provider the additional values of MRDMA and IRDMA are supported.
         :param pulumi.Input[int] queue_count: The networking queue count that's specified by users for the network interface. Both Rx and Tx queues will be set to this number. It will be empty if not specified.
-        :param pulumi.Input[str] stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        :param pulumi.Input[str] stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         :param pulumi.Input[str] subnetwork: the name of the subnetwork to attach this interface
                to. The subnetwork must exist in the same `region` this instance will be
                created in. Either `network` or `subnetwork` must be provided.
@@ -33129,7 +33129,7 @@ class RegionInstanceTemplateNetworkInterfaceArgs:
     @pulumi.getter(name="stackType")
     def stack_type(self) -> Optional[pulumi.Input[str]]:
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         return pulumi.get(self, "stack_type")
 

pulumi_gcp/compute/interconnect_attachment.py

@@ -51,7 +51,7 @@ class InterconnectAttachmentArgs:
                For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
                Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
                Defaults to BPS_10G
-               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         :param pulumi.Input[Sequence[pulumi.Input[str]]] candidate_subnets: Up to 16 candidate prefixes that can be used to restrict the allocation
                of cloudRouterIpAddress and customerRouterIpAddress for this attachment.
                All prefixes must be within link-local address space (169.254.0.0/16)
@@ -199,7 +199,7 @@ class InterconnectAttachmentArgs:
         For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
         Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
         Defaults to BPS_10G
-        Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+        Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         """
         return pulumi.get(self, "bandwidth")
 
@@ -477,7 +477,7 @@ class _InterconnectAttachmentState:
                For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
                Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
                Defaults to BPS_10G
-               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         :param pulumi.Input[Sequence[pulumi.Input[str]]] candidate_subnets: Up to 16 candidate prefixes that can be used to restrict the allocation
                of cloudRouterIpAddress and customerRouterIpAddress for this attachment.
                All prefixes must be within link-local address space (169.254.0.0/16)
@@ -659,7 +659,7 @@ class _InterconnectAttachmentState:
         For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
         Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
         Defaults to BPS_10G
-        Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+        Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         """
         return pulumi.get(self, "bandwidth")
 
@@ -1177,7 +1177,7 @@ class InterconnectAttachment(pulumi.CustomResource):
                For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
                Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
                Defaults to BPS_10G
-               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         :param pulumi.Input[Sequence[pulumi.Input[str]]] candidate_subnets: Up to 16 candidate prefixes that can be used to restrict the allocation
                of cloudRouterIpAddress and customerRouterIpAddress for this attachment.
                All prefixes must be within link-local address space (169.254.0.0/16)
@@ -1477,7 +1477,7 @@ class InterconnectAttachment(pulumi.CustomResource):
                For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
                Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
                Defaults to BPS_10G
-               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+               Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         :param pulumi.Input[Sequence[pulumi.Input[str]]] candidate_subnets: Up to 16 candidate prefixes that can be used to restrict the allocation
                of cloudRouterIpAddress and customerRouterIpAddress for this attachment.
                All prefixes must be within link-local address space (169.254.0.0/16)
@@ -1632,7 +1632,7 @@ class InterconnectAttachment(pulumi.CustomResource):
         For attachments of type PARTNER, the Google Partner that is operating the interconnect must set the bandwidth.
         Output only for PARTNER type, mutable for PARTNER_PROVIDER and DEDICATED,
         Defaults to BPS_10G
-        Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`.
+        Possible values are: `BPS_50M`, `BPS_100M`, `BPS_200M`, `BPS_300M`, `BPS_400M`, `BPS_500M`, `BPS_1G`, `BPS_2G`, `BPS_5G`, `BPS_10G`, `BPS_20G`, `BPS_50G`, `BPS_100G`.
         """
         return pulumi.get(self, "bandwidth")
 

pulumi_gcp/compute/outputs.py

@@ -12415,7 +12415,7 @@ class InstanceNetworkInterface(dict):
         :param str nic_type: The type of vNIC to be used on this interface. Possible values: GVNIC, VIRTIO_NET, IDPF. In the beta provider the additional values of MRDMA and IRDMA are supported.
         :param int queue_count: The networking queue count that's specified by users for the network interface. Both Rx and Tx queues will be set to this number. It will be empty if not specified.
         :param str security_policy: A full or partial URL to a security policy to add to this instance. If this field is set to an empty string it will remove the associated security policy.
-        :param str stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        :param str stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         :param str subnetwork: The name or self_link of the subnetwork to attach this
                interface to. Either `network` or `subnetwork` must be provided. If network isn't provided
                it will be inferred from the subnetwork. The subnetwork must exist in the same region this
@@ -12578,7 +12578,7 @@ class InstanceNetworkInterface(dict):
     @pulumi.getter(name="stackType")
     def stack_type(self) -> Optional[str]:
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         return pulumi.get(self, "stack_type")
 
@@ -14372,7 +14372,7 @@ class InstanceTemplateNetworkInterface(dict):
                empty, the address will be automatically assigned.
         :param str nic_type: The type of vNIC to be used on this interface. Possible values: GVNIC, VIRTIO_NET. In the beta provider the additional values of MRDMA and IRDMA are supported.
         :param int queue_count: The networking queue count that's specified by users for the network interface. Both Rx and Tx queues will be set to this number. It will be empty if not specified.
-        :param str stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        :param str stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         :param str subnetwork: the name of the subnetwork to attach this interface
                to. The subnetwork must exist in the same `region` this instance will be
                created in. Either `network` or `subnetwork` must be provided.
@@ -14523,7 +14523,7 @@ class InstanceTemplateNetworkInterface(dict):
     @pulumi.getter(name="stackType")
     def stack_type(self) -> Optional[str]:
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         return pulumi.get(self, "stack_type")
 
@@ -24540,7 +24540,7 @@ class RegionInstanceTemplateNetworkInterface(dict):
                empty, the address will be automatically assigned.
         :param str nic_type: The type of vNIC to be used on this interface. Possible values: GVNIC, VIRTIO_NET. In the beta provider the additional values of MRDMA and IRDMA are supported.
         :param int queue_count: The networking queue count that's specified by users for the network interface. Both Rx and Tx queues will be set to this number. It will be empty if not specified.
-        :param str stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        :param str stack_type: The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         :param str subnetwork: the name of the subnetwork to attach this interface
                to. The subnetwork must exist in the same `region` this instance will be
                created in. Either `network` or `subnetwork` must be provided.
@@ -24672,7 +24672,7 @@ class RegionInstanceTemplateNetworkInterface(dict):
     @pulumi.getter(name="stackType")
     def stack_type(self) -> Optional[str]:
         """
-        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6 or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
+        The stack type for this network interface to identify whether the IPv6 feature is enabled or not. Values are IPV4_IPV6, IPV6_ONLY or IPV4_ONLY. If not specified, IPV4_ONLY will be used.
         """
         return pulumi.get(self, "stack_type")
 

pulumi_gcp/compute/route.py

@@ -382,13 +382,11 @@ class _RouteState:
                specified)  The zone of the instance specified in
                `next_hop_instance`.  Omit if `next_hop_instance` is specified as
                a URL.
-        :param pulumi.Input[str] next_hop_inter_region_cost: Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance,
-               distance, and available bandwidth between regions.
+        :param pulumi.Input[str] next_hop_inter_region_cost: Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
         :param pulumi.Input[str] next_hop_ip: Network IP address of an instance that should handle matching packets.
         :param pulumi.Input[str] next_hop_med: Multi-Exit Discriminator, a BGP route metric that indicates the desirability of a particular route in a network.
         :param pulumi.Input[str] next_hop_network: URL to a Network that should handle matching packets.
-        :param pulumi.Input[str] next_hop_origin: Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or
-               INCOMPLETE.
+        :param pulumi.Input[str] next_hop_origin: Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
         :param pulumi.Input[str] next_hop_vpn_tunnel: URL to a VpnTunnel that should handle matching packets.
         :param pulumi.Input[int] priority: The priority of this route. Priority is used to break ties in cases
                where there is more than one matching route of equal prefix length.
@@ -574,8 +572,7 @@ class _RouteState:
     @pulumi.getter(name="nextHopInterRegionCost")
     def next_hop_inter_region_cost(self) -> Optional[pulumi.Input[str]]:
         """
-        Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance,
-        distance, and available bandwidth between regions.
+        Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
         """
         return pulumi.get(self, "next_hop_inter_region_cost")
 
@@ -623,8 +620,7 @@ class _RouteState:
     @pulumi.getter(name="nextHopOrigin")
     def next_hop_origin(self) -> Optional[pulumi.Input[str]]:
         """
-        Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or
-        INCOMPLETE.
+        Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
         """
         return pulumi.get(self, "next_hop_origin")
 
@@ -1270,13 +1266,11 @@ class Route(pulumi.CustomResource):
                specified)  The zone of the instance specified in
                `next_hop_instance`.  Omit if `next_hop_instance` is specified as
                a URL.
-        :param pulumi.Input[str] next_hop_inter_region_cost: Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance,
-               distance, and available bandwidth between regions.
+        :param pulumi.Input[str] next_hop_inter_region_cost: Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
         :param pulumi.Input[str] next_hop_ip: Network IP address of an instance that should handle matching packets.
         :param pulumi.Input[str] next_hop_med: Multi-Exit Discriminator, a BGP route metric that indicates the desirability of a particular route in a network.
         :param pulumi.Input[str] next_hop_network: URL to a Network that should handle matching packets.
-        :param pulumi.Input[str] next_hop_origin: Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or
-               INCOMPLETE.
+        :param pulumi.Input[str] next_hop_origin: Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
         :param pulumi.Input[str] next_hop_vpn_tunnel: URL to a VpnTunnel that should handle matching packets.
         :param pulumi.Input[int] priority: The priority of this route. Priority is used to break ties in cases
                where there is more than one matching route of equal prefix length.
@@ -1417,8 +1411,7 @@ class Route(pulumi.CustomResource):
     @pulumi.getter(name="nextHopInterRegionCost")
     def next_hop_inter_region_cost(self) -> pulumi.Output[str]:
         """
-        Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance,
-        distance, and available bandwidth between regions.
+        Internal fixed region-to-region cost that Google Cloud calculates based on factors such as network performance, distance, and available bandwidth between regions.
         """
         return pulumi.get(self, "next_hop_inter_region_cost")
 
@@ -1450,8 +1443,7 @@ class Route(pulumi.CustomResource):
     @pulumi.getter(name="nextHopOrigin")
     def next_hop_origin(self) -> pulumi.Output[str]:
         """
-        Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or
-        INCOMPLETE.
+        Indicates the origin of the route. Can be IGP (Interior Gateway Protocol), EGP (Exterior Gateway Protocol), or INCOMPLETE.
         """
         return pulumi.get(self, "next_hop_origin")
 

pulumi_gcp/compute/subnetwork.py

@@ -109,7 +109,7 @@ class SubnetworkArgs:
                Defaults to false.
         :param pulumi.Input[str] stack_type: The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
                If not specified IPV4_ONLY will be used.
-               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         """
         pulumi.set(__self__, "network", network)
         if allow_subnet_cidr_routes_overlap is not None:
@@ -406,7 +406,7 @@ class SubnetworkArgs:
         """
         The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
         If not specified IPV4_ONLY will be used.
-        Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+        Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         """
         return pulumi.get(self, "stack_type")
 
@@ -520,7 +520,7 @@ class _SubnetworkState:
                Defaults to false.
         :param pulumi.Input[str] stack_type: The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
                If not specified IPV4_ONLY will be used.
-               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         :param pulumi.Input[int] subnetwork_id: The unique identifier number for the resource. This identifier is defined by the server.
         """
         if allow_subnet_cidr_routes_overlap is not None:
@@ -910,7 +910,7 @@ class _SubnetworkState:
         """
         The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
         If not specified IPV4_ONLY will be used.
-        Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+        Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         """
         return pulumi.get(self, "stack_type")
 
@@ -1267,7 +1267,7 @@ class Subnetwork(pulumi.CustomResource):
                Defaults to false.
         :param pulumi.Input[str] stack_type: The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
                If not specified IPV4_ONLY will be used.
-               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         """
         ...
     @overload
@@ -1703,7 +1703,7 @@ class Subnetwork(pulumi.CustomResource):
                Defaults to false.
         :param pulumi.Input[str] stack_type: The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
                If not specified IPV4_ONLY will be used.
-               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+               Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         :param pulumi.Input[int] subnetwork_id: The unique identifier number for the resource. This identifier is defined by the server.
         """
         opts = pulumi.ResourceOptions.merge(opts, pulumi.ResourceOptions(id=id))
@@ -1978,7 +1978,7 @@ class Subnetwork(pulumi.CustomResource):
         """
         The stack type for this subnet to identify whether the IPv6 feature is enabled or not.
         If not specified IPV4_ONLY will be used.
-        Possible values are: `IPV4_ONLY`, `IPV4_IPV6`.
+        Possible values are: `IPV4_ONLY`, `IPV4_IPV6`, `IPV6_ONLY`.
         """
         return pulumi.get(self, "stack_type")
 

pulumi_gcp/compute/target_instance.py

@@ -507,7 +507,7 @@ class TargetInstance(pulumi.CustomResource):
             })
         policyddosprotection = gcp.compute.RegionSecurityPolicy("policyddosprotection",
             region="southamerica-west1",
-            name="tf-test-policyddos_85794",
+            name="tf-test-policyddos_21197",
             description="ddos protection security policy to set target instance",
             type="CLOUD_ARMOR_NETWORK",
             ddos_protection_config={
@@ -515,7 +515,7 @@ class TargetInstance(pulumi.CustomResource):
             })
         edge_sec_service = gcp.compute.NetworkEdgeSecurityService("edge_sec_service",
             region="southamerica-west1",
-            name="tf-test-edgesec_21197",
+            name="tf-test-edgesec_52865",
             security_policy=policyddosprotection.self_link)
         regionsecuritypolicy = gcp.compute.RegionSecurityPolicy("regionsecuritypolicy",
             name="region-secpolicy",
@@ -697,7 +697,7 @@ class TargetInstance(pulumi.CustomResource):
             })
         policyddosprotection = gcp.compute.RegionSecurityPolicy("policyddosprotection",
             region="southamerica-west1",
-            name="tf-test-policyddos_85794",
+            name="tf-test-policyddos_21197",
             description="ddos protection security policy to set target instance",
             type="CLOUD_ARMOR_NETWORK",
             ddos_protection_config={
@@ -705,7 +705,7 @@ class TargetInstance(pulumi.CustomResource):
             })
         edge_sec_service = gcp.compute.NetworkEdgeSecurityService("edge_sec_service",
             region="southamerica-west1",
-            name="tf-test-edgesec_21197",
+            name="tf-test-edgesec_52865",
             security_policy=policyddosprotection.self_link)
         regionsecuritypolicy = gcp.compute.RegionSecurityPolicy("regionsecuritypolicy",
             name="region-secpolicy",

pulumi_gcp/compute/url_map.py

@@ -612,6 +612,8 @@ class URLMap(pulumi.CustomResource):
         To get more information about UrlMap, see:
 
         * [API documentation](https://cloud.google.com/compute/docs/reference/rest/v1/urlMaps)
+        * How-to Guides
+            * [Official Documentation](https://cloud.google.com/load-balancing/docs/url-map-concepts)
 
         ## Example Usage
 
@@ -1350,6 +1352,8 @@ class URLMap(pulumi.CustomResource):
         To get more information about UrlMap, see:
 
         * [API documentation](https://cloud.google.com/compute/docs/reference/rest/v1/urlMaps)
+        * How-to Guides
+            * [Official Documentation](https://cloud.google.com/load-balancing/docs/url-map-concepts)
 
         ## Example Usage
 

pulumi_gcp/config/__init__.pyi

@@ -109,6 +109,8 @@ clouddomainsCustomEndpoint: Optional[str]
 
 cloudfunctions2CustomEndpoint: Optional[str]
 
+colabCustomEndpoint: Optional[str]
+
 composerCustomEndpoint: Optional[str]
 
 computeCustomEndpoint: Optional[str]
@@ -279,6 +281,10 @@ osLoginCustomEndpoint: Optional[str]
 
 parallelstoreCustomEndpoint: Optional[str]
 
+parameterManagerCustomEndpoint: Optional[str]
+
+parameterManagerRegionalCustomEndpoint: Optional[str]
+
 privatecaCustomEndpoint: Optional[str]
 
 privilegedAccessManagerCustomEndpoint: Optional[str]

pulumi_gcp/config/vars.py

@@ -209,6 +209,10 @@ class _ExportableConfig(types.ModuleType):
     def cloudfunctions2_custom_endpoint(self) -> Optional[str]:
         return __config__.get('cloudfunctions2CustomEndpoint')
 
+    @property
+    def colab_custom_endpoint(self) -> Optional[str]:
+        return __config__.get('colabCustomEndpoint')
+
     @property
     def composer_custom_endpoint(self) -> Optional[str]:
         return __config__.get('composerCustomEndpoint')
@@ -549,6 +553,14 @@ class _ExportableConfig(types.ModuleType):
     def parallelstore_custom_endpoint(self) -> Optional[str]:
         return __config__.get('parallelstoreCustomEndpoint')
 
+    @property
+    def parameter_manager_custom_endpoint(self) -> Optional[str]:
+        return __config__.get('parameterManagerCustomEndpoint')
+
+    @property
+    def parameter_manager_regional_custom_endpoint(self) -> Optional[str]:
+        return __config__.get('parameterManagerRegionalCustomEndpoint')
+
     @property
     def privateca_custom_endpoint(self) -> Optional[str]:
         return __config__.get('privatecaCustomEndpoint')

pulumi_gcp/databasemigrationservice/connection_profile.py

@@ -710,11 +710,11 @@ class ConnectionProfile(pulumi.CustomResource):
                 "foo": "bar",
             },
             alloydb={
-                "cluster_id": "tf-test-dbmsalloycluster_52865",
+                "cluster_id": "tf-test-dbmsalloycluster_85840",
                 "settings": {
                     "initial_user": {
-                        "user": "alloyuser_85840",
-                        "password": "alloypass_60302",
+                        "user": "alloyuser_60302",
+                        "password": "alloypass_22811",
                     },
                     "vpc_network": default.id,
                     "labels": {
@@ -1070,11 +1070,11 @@ class ConnectionProfile(pulumi.CustomResource):
                 "foo": "bar",
             },
             alloydb={
-                "cluster_id": "tf-test-dbmsalloycluster_52865",
+                "cluster_id": "tf-test-dbmsalloycluster_85840",
                 "settings": {
                     "initial_user": {
-                        "user": "alloyuser_85840",
-                        "password": "alloypass_60302",
+                        "user": "alloyuser_60302",
+                        "password": "alloypass_22811",
                     },
                     "vpc_network": default.id,
                     "labels": {

pulumi_gcp/dataplex/entry_type.py

@@ -511,7 +511,7 @@ class EntryType(pulumi.CustomResource):
         import pulumi_gcp as gcp
 
         test_entry_type_full = gcp.dataplex.AspectType("test_entry_type_full",
-            aspect_type_id="tf-test-aspect-type_22811",
+            aspect_type_id="tf-test-aspect-type_91042",
             location="us-central1",
             project="my-project-name",
             metadata_template=\"\"\"{
@@ -630,7 +630,7 @@ class EntryType(pulumi.CustomResource):
         import pulumi_gcp as gcp
 
         test_entry_type_full = gcp.dataplex.AspectType("test_entry_type_full",
-            aspect_type_id="tf-test-aspect-type_22811",
+            aspect_type_id="tf-test-aspect-type_91042",
             location="us-central1",
             project="my-project-name",
             metadata_template=\"\"\"{

pulumi_gcp/dataplex/task.py

@@ -572,11 +572,11 @@ class Task(pulumi.CustomResource):
 
         project = gcp.organizations.get_project()
         example = gcp.dataplex.Lake("example",
-            name="tf-test-lake_91042",
+            name="tf-test-lake_72490",
             location="us-central1",
             project="my-project-name")
         example_task = gcp.dataplex.Task("example",
-            task_id="tf-test-task_72490",
+            task_id="tf-test-task_89605",
             location="us-central1",
             lake=example.name,
             description="Test Task Basic",
@@ -610,15 +610,15 @@ class Task(pulumi.CustomResource):
 
         # VPC network
         default = gcp.compute.Network("default",
-            name="tf-test-workstation-cluster_89605",
+            name="tf-test-workstation-cluster_56730",
             auto_create_subnetworks=True)
         project = gcp.organizations.get_project()
         example_spark = gcp.dataplex.Lake("example_spark",
-            name="tf-test-lake_56730",
+            name="tf-test-lake_95154",
             location="us-central1",
             project="my-project-name")
         example_spark_task = gcp.dataplex.Task("example_spark",
-            task_id="tf-test-task_95154",
+            task_id="tf-test-task_64336",
             location="us-central1",
             lake=example_spark.name,
             trigger_spec={
@@ -666,15 +666,15 @@ class Task(pulumi.CustomResource):
 
         # VPC network
         default = gcp.compute.Network("default",
-            name="tf-test-workstation-cluster_64336",
+            name="tf-test-workstation-cluster_34962",
             auto_create_subnetworks=True)
         project = gcp.organizations.get_project()
         example_notebook = gcp.dataplex.Lake("example_notebook",
-            name="tf-test-lake_34962",
+            name="tf-test-lake_74000",
             location="us-central1",
             project="my-project-name")
         example_notebook_task = gcp.dataplex.Task("example_notebook",
-            task_id="tf-test-task_74000",
+            task_id="tf-test-task_75125",
             location="us-central1",
             lake=example_notebook.name,
             trigger_spec={
@@ -782,11 +782,11 @@ class Task(pulumi.CustomResource):
 
         project = gcp.organizations.get_project()
         example = gcp.dataplex.Lake("example",
-            name="tf-test-lake_91042",
+            name="tf-test-lake_72490",
             location="us-central1",
             project="my-project-name")
         example_task = gcp.dataplex.Task("example",
-            task_id="tf-test-task_72490",
+            task_id="tf-test-task_89605",
             location="us-central1",
             lake=example.name,
             description="Test Task Basic",
@@ -820,15 +820,15 @@ class Task(pulumi.CustomResource):
 
         # VPC network
         default = gcp.compute.Network("default",
-            name="tf-test-workstation-cluster_89605",
+            name="tf-test-workstation-cluster_56730",
             auto_create_subnetworks=True)
         project = gcp.organizations.get_project()
         example_spark = gcp.dataplex.Lake("example_spark",
-            name="tf-test-lake_56730",
+            name="tf-test-lake_95154",
             location="us-central1",
             project="my-project-name")
         example_spark_task = gcp.dataplex.Task("example_spark",
-            task_id="tf-test-task_95154",
+            task_id="tf-test-task_64336",
             location="us-central1",
             lake=example_spark.name,
             trigger_spec={
@@ -876,15 +876,15 @@ class Task(pulumi.CustomResource):
 
         # VPC network
         default = gcp.compute.Network("default",
-            name="tf-test-workstation-cluster_64336",
+            name="tf-test-workstation-cluster_34962",
             auto_create_subnetworks=True)
         project = gcp.organizations.get_project()
         example_notebook = gcp.dataplex.Lake("example_notebook",
-            name="tf-test-lake_34962",
+            name="tf-test-lake_74000",
             location="us-central1",
             project="my-project-name")
         example_notebook_task = gcp.dataplex.Task("example_notebook",
-            task_id="tf-test-task_74000",
+            task_id="tf-test-task_75125",
             location="us-central1",
             lake=example_notebook.name,
             trigger_spec={