pulumi-gcp 7.13.0__py3-none-any.whl → 7.14.0__py3-none-any.whl

pulumi_gcp/compute/_inputs.py

@@ -1063,8 +1063,9 @@ class AutoscalerAutoscalingPolicyScaleDownControlMaxScaledDownReplicasArgs:
         """
         :param pulumi.Input[int] fixed: Specifies a fixed number of VM instances. This must be a positive
                integer.
-        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%, inclusive.
-               For example, specify 80 for 80%.
+        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+               For example, specify 80 for 80%!
+               (MISSING)
         """
         if fixed is not None:
             pulumi.set(__self__, "fixed", fixed)
@@ -1088,8 +1089,9 @@ class AutoscalerAutoscalingPolicyScaleDownControlMaxScaledDownReplicasArgs:
     @pulumi.getter
     def percent(self) -> Optional[pulumi.Input[int]]:
         """
-        Specifies a percentage of instances between 0 to 100%, inclusive.
-        For example, specify 80 for 80%.
+        Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+        For example, specify 80 for 80%!
+        (MISSING)
         """
         return pulumi.get(self, "percent")
 
@@ -1149,8 +1151,9 @@ class AutoscalerAutoscalingPolicyScaleInControlMaxScaledInReplicasArgs:
         """
         :param pulumi.Input[int] fixed: Specifies a fixed number of VM instances. This must be a positive
                integer.
-        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%, inclusive.
-               For example, specify 80 for 80%.
+        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+               For example, specify 80 for 80%!
+               (MISSING)
         """
         if fixed is not None:
             pulumi.set(__self__, "fixed", fixed)
@@ -1174,8 +1177,9 @@ class AutoscalerAutoscalingPolicyScaleInControlMaxScaledInReplicasArgs:
     @pulumi.getter
     def percent(self) -> Optional[pulumi.Input[int]]:
         """
-        Specifies a percentage of instances between 0 to 100%, inclusive.
-        For example, specify 80 for 80%.
+        Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+        For example, specify 80 for 80%!
+        (MISSING)
         """
         return pulumi.get(self, "percent")
 
@@ -1738,10 +1742,10 @@ class BackendServiceBackendArgs:
                Possible values are: `UTILIZATION`, `RATE`, `CONNECTION`.
         :param pulumi.Input[float] capacity_scaler: A multiplier applied to the group's maximum servicing capacity
                (based on UTILIZATION, RATE or CONNECTION).
-               Default value is 1, which means the group will serve up to 100%
-               of its configured capacity (depending on balancingMode). A
+               Default value is 1, which means the group will serve up to 100%!
+               (MISSING)of its configured capacity (depending on balancingMode). A
                setting of 0 means the group is completely drained, offering
-               0% of its available Capacity. Valid range is [0.0,1.0].
+               0%!o(MISSING)f its available Capacity. Valid range is [0.0,1.0].
         :param pulumi.Input[str] description: An optional description of this resource.
                Provide this property when you create the resource.
         :param pulumi.Input[int] max_connections: The max number of simultaneous connections for the group. Can
@@ -1849,10 +1853,10 @@ class BackendServiceBackendArgs:
         """
         A multiplier applied to the group's maximum servicing capacity
         (based on UTILIZATION, RATE or CONNECTION).
-        Default value is 1, which means the group will serve up to 100%
-        of its configured capacity (depending on balancingMode). A
+        Default value is 1, which means the group will serve up to 100%!
+        (MISSING)of its configured capacity (depending on balancingMode). A
         setting of 0 means the group is completely drained, offering
-        0% of its available Capacity. Valid range is [0.0,1.0].
+        0%!o(MISSING)f its available Capacity. Valid range is [0.0,1.0].
         """
         return pulumi.get(self, "capacity_scaler")
 
@@ -3110,7 +3114,8 @@ class BackendServiceOutlierDetectionArgs:
                ejections as well as hosts being returned to service. Defaults to 10 seconds.
                Structure is documented below.
         :param pulumi.Input[int] max_ejection_percent: Maximum percentage of hosts in the load balancing pool for the backend service
-               that can be ejected. Defaults to 10%.
+               that can be ejected. Defaults to 10%!
+               (MISSING)
         :param pulumi.Input[int] success_rate_minimum_hosts: The number of hosts in a cluster that must have enough request volume to detect
                success rate outliers. If the number of hosts is less than this setting, outlier
                detection via success rate statistics is not performed for any host in the
@@ -3254,7 +3259,8 @@ class BackendServiceOutlierDetectionArgs:
     def max_ejection_percent(self) -> Optional[pulumi.Input[int]]:
         """
         Maximum percentage of hosts in the load balancing pool for the backend service
-        that can be ejected. Defaults to 10%.
+        that can be ejected. Defaults to 10%!
+        (MISSING)
         """
         return pulumi.get(self, "max_ejection_percent")
 
@@ -9346,22 +9352,36 @@ class InstanceGroupManagerAutoHealingPoliciesArgs:
 @pulumi.input_type
 class InstanceGroupManagerInstanceLifecyclePolicyArgs:
     def __init__(__self__, *,
+                 default_action_on_failure: Optional[pulumi.Input[str]] = None,
                  force_update_on_repair: Optional[pulumi.Input[str]] = None):
         """
-        :param pulumi.Input[str] force_update_on_repair: ), Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: `YES`, `NO`. If `YES` and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If `NO` (default), then updates are applied in accordance with the group's update policy type.
-               
+        :param pulumi.Input[str] default_action_on_failure: , Default behavior for all instance or health check failures. Valid options are: `REPAIR`, `DO_NOTHING`. If `DO_NOTHING` then instances will not be repaired. If `REPAIR` (default), then failed instances will be repaired.
                - - -
+        :param pulumi.Input[str] force_update_on_repair: , Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: `YES`, `NO`. If `YES` and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If `NO` (default), then updates are applied in accordance with the group's update policy type.
         """
+        if default_action_on_failure is not None:
+            pulumi.set(__self__, "default_action_on_failure", default_action_on_failure)
         if force_update_on_repair is not None:
             pulumi.set(__self__, "force_update_on_repair", force_update_on_repair)
 
+    @property
+    @pulumi.getter(name="defaultActionOnFailure")
+    def default_action_on_failure(self) -> Optional[pulumi.Input[str]]:
+        """
+        , Default behavior for all instance or health check failures. Valid options are: `REPAIR`, `DO_NOTHING`. If `DO_NOTHING` then instances will not be repaired. If `REPAIR` (default), then failed instances will be repaired.
+        - - -
+        """
+        return pulumi.get(self, "default_action_on_failure")
+
+    @default_action_on_failure.setter
+    def default_action_on_failure(self, value: Optional[pulumi.Input[str]]):
+        pulumi.set(self, "default_action_on_failure", value)
+
     @property
     @pulumi.getter(name="forceUpdateOnRepair")
     def force_update_on_repair(self) -> Optional[pulumi.Input[str]]:
         """
-        ), Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: `YES`, `NO`. If `YES` and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If `NO` (default), then updates are applied in accordance with the group's update policy type.
-
-        - - -
+        , Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: `YES`, `NO`. If `YES` and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If `NO` (default), then updates are applied in accordance with the group's update policy type.
         """
         return pulumi.get(self, "force_update_on_repair")
 
@@ -15320,8 +15340,9 @@ class RegionAutoscalerAutoscalingPolicyScaleDownControlMaxScaledDownReplicasArgs
         """
         :param pulumi.Input[int] fixed: Specifies a fixed number of VM instances. This must be a positive
                integer.
-        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%, inclusive.
-               For example, specify 80 for 80%.
+        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+               For example, specify 80 for 80%!
+               (MISSING)
         """
         if fixed is not None:
             pulumi.set(__self__, "fixed", fixed)
@@ -15345,8 +15366,9 @@ class RegionAutoscalerAutoscalingPolicyScaleDownControlMaxScaledDownReplicasArgs
     @pulumi.getter
     def percent(self) -> Optional[pulumi.Input[int]]:
         """
-        Specifies a percentage of instances between 0 to 100%, inclusive.
-        For example, specify 80 for 80%.
+        Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+        For example, specify 80 for 80%!
+        (MISSING)
         """
         return pulumi.get(self, "percent")
 
@@ -15406,8 +15428,9 @@ class RegionAutoscalerAutoscalingPolicyScaleInControlMaxScaledInReplicasArgs:
         """
         :param pulumi.Input[int] fixed: Specifies a fixed number of VM instances. This must be a positive
                integer.
-        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%, inclusive.
-               For example, specify 80 for 80%.
+        :param pulumi.Input[int] percent: Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+               For example, specify 80 for 80%!
+               (MISSING)
         """
         if fixed is not None:
             pulumi.set(__self__, "fixed", fixed)
@@ -15431,8 +15454,9 @@ class RegionAutoscalerAutoscalingPolicyScaleInControlMaxScaledInReplicasArgs:
     @pulumi.getter
     def percent(self) -> Optional[pulumi.Input[int]]:
         """
-        Specifies a percentage of instances between 0 to 100%, inclusive.
-        For example, specify 80 for 80%.
+        Specifies a percentage of instances between 0 to 100%!,(MISSING) inclusive.
+        For example, specify 80 for 80%!
+        (MISSING)
         """
         return pulumi.get(self, "percent")
 
@@ -15600,7 +15624,7 @@ class RegionBackendServiceBackendArgs:
                but is required for non-INTERNAL backend service. The total
                capacity_scaler for all backends must be non-zero.
                A setting of 0 means the group is completely drained, offering
-               0% of its available Capacity. Valid range is [0.0,1.0].
+               0%!o(MISSING)f its available Capacity. Valid range is [0.0,1.0].
         :param pulumi.Input[str] description: An optional description of this resource.
                Provide this property when you create the resource.
         :param pulumi.Input[bool] failover: This field designates whether this is a failover backend. More
@@ -15723,7 +15747,7 @@ class RegionBackendServiceBackendArgs:
         but is required for non-INTERNAL backend service. The total
         capacity_scaler for all backends must be non-zero.
         A setting of 0 means the group is completely drained, offering
-        0% of its available Capacity. Valid range is [0.0,1.0].
+        0%!o(MISSING)f its available Capacity. Valid range is [0.0,1.0].
         """
         return pulumi.get(self, "capacity_scaler")
 
@@ -17014,7 +17038,8 @@ class RegionBackendServiceOutlierDetectionArgs:
                ejections as well as hosts being returned to service. Defaults to 10 seconds.
                Structure is documented below.
         :param pulumi.Input[int] max_ejection_percent: Maximum percentage of hosts in the load balancing pool for the backend service
-               that can be ejected. Defaults to 10%.
+               that can be ejected. Defaults to 10%!
+               (MISSING)
         :param pulumi.Input[int] success_rate_minimum_hosts: The number of hosts in a cluster that must have enough request volume to detect
                success rate outliers. If the number of hosts is less than this setting, outlier
                detection via success rate statistics is not performed for any host in the
@@ -17158,7 +17183,8 @@ class RegionBackendServiceOutlierDetectionArgs:
     def max_ejection_percent(self) -> Optional[pulumi.Input[int]]:
         """
         Maximum percentage of hosts in the load balancing pool for the backend service
-        that can be ejected. Defaults to 10%.
+        that can be ejected. Defaults to 10%!
+        (MISSING)
         """
         return pulumi.get(self, "max_ejection_percent")
 
@@ -18564,20 +18590,38 @@ class RegionInstanceGroupManagerAutoHealingPoliciesArgs:
 @pulumi.input_type
 class RegionInstanceGroupManagerInstanceLifecyclePolicyArgs:
     def __init__(__self__, *,
+                 default_action_on_failure: Optional[pulumi.Input[str]] = None,
                  force_update_on_repair: Optional[pulumi.Input[str]] = None):
         """
-        :param pulumi.Input[str] force_update_on_repair: ), Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: YES, NO. If YES and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If NO (default), then updates are applied in accordance with the group's update policy type.
+        :param pulumi.Input[str] default_action_on_failure: , Default behavior for all instance or health check failures. Valid options are: `REPAIR`, `DO_NOTHING`. If `DO_NOTHING` then instances will not be repaired. If `REPAIR` (default), then failed instances will be repaired.
+               
                - - -
+        :param pulumi.Input[str] force_update_on_repair: , Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: `YES`, `NO`. If `YES` and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If `NO` (default), then updates are applied in accordance with the group's update policy type.
         """
+        if default_action_on_failure is not None:
+            pulumi.set(__self__, "default_action_on_failure", default_action_on_failure)
         if force_update_on_repair is not None:
             pulumi.set(__self__, "force_update_on_repair", force_update_on_repair)
 
+    @property
+    @pulumi.getter(name="defaultActionOnFailure")
+    def default_action_on_failure(self) -> Optional[pulumi.Input[str]]:
+        """
+        , Default behavior for all instance or health check failures. Valid options are: `REPAIR`, `DO_NOTHING`. If `DO_NOTHING` then instances will not be repaired. If `REPAIR` (default), then failed instances will be repaired.
+
+        - - -
+        """
+        return pulumi.get(self, "default_action_on_failure")
+
+    @default_action_on_failure.setter
+    def default_action_on_failure(self, value: Optional[pulumi.Input[str]]):
+        pulumi.set(self, "default_action_on_failure", value)
+
     @property
     @pulumi.getter(name="forceUpdateOnRepair")
     def force_update_on_repair(self) -> Optional[pulumi.Input[str]]:
         """
-        ), Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: YES, NO. If YES and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If NO (default), then updates are applied in accordance with the group's update policy type.
-        - - -
+        , Specifies whether to apply the group's latest configuration when repairing a VM. Valid options are: `YES`, `NO`. If `YES` and you updated the group's instance template or per-instance configurations after the VM was created, then these changes are applied when VM is repaired. If `NO` (default), then updates are applied in accordance with the group's update policy type.
         """
         return pulumi.get(self, "force_update_on_repair")
 
@@ -30008,14 +30052,21 @@ class ServiceAttachmentConnectedEndpointArgs:
 class ServiceAttachmentConsumerAcceptListArgs:
     def __init__(__self__, *,
                  connection_limit: pulumi.Input[int],
-                 project_id_or_num: pulumi.Input[str]):
+                 network_url: Optional[pulumi.Input[str]] = None,
+                 project_id_or_num: Optional[pulumi.Input[str]] = None):
         """
         :param pulumi.Input[int] connection_limit: The number of consumer forwarding rules the consumer project can
                create.
+        :param pulumi.Input[str] network_url: The network that is allowed to connect to this service attachment.
+               Only one of project_id_or_num and network_url may be set.
         :param pulumi.Input[str] project_id_or_num: A project that is allowed to connect to this service attachment.
+               Only one of project_id_or_num and network_url may be set.
         """
         pulumi.set(__self__, "connection_limit", connection_limit)
-        pulumi.set(__self__, "project_id_or_num", project_id_or_num)
+        if network_url is not None:
+            pulumi.set(__self__, "network_url", network_url)
+        if project_id_or_num is not None:
+            pulumi.set(__self__, "project_id_or_num", project_id_or_num)
 
     @property
     @pulumi.getter(name="connectionLimit")
@@ -30030,16 +30081,30 @@ class ServiceAttachmentConsumerAcceptListArgs:
     def connection_limit(self, value: pulumi.Input[int]):
         pulumi.set(self, "connection_limit", value)
 
+    @property
+    @pulumi.getter(name="networkUrl")
+    def network_url(self) -> Optional[pulumi.Input[str]]:
+        """
+        The network that is allowed to connect to this service attachment.
+        Only one of project_id_or_num and network_url may be set.
+        """
+        return pulumi.get(self, "network_url")
+
+    @network_url.setter
+    def network_url(self, value: Optional[pulumi.Input[str]]):
+        pulumi.set(self, "network_url", value)
+
     @property
     @pulumi.getter(name="projectIdOrNum")
-    def project_id_or_num(self) -> pulumi.Input[str]:
+    def project_id_or_num(self) -> Optional[pulumi.Input[str]]:
         """
         A project that is allowed to connect to this service attachment.
+        Only one of project_id_or_num and network_url may be set.
         """
         return pulumi.get(self, "project_id_or_num")
 
     @project_id_or_num.setter
-    def project_id_or_num(self, value: pulumi.Input[str]):
+    def project_id_or_num(self, value: Optional[pulumi.Input[str]]):
         pulumi.set(self, "project_id_or_num", value)
 
 

pulumi_gcp/compute/address.py

@@ -790,16 +790,20 @@ class Address(pulumi.CustomResource):
             * [Reserving a Static Internal IP Address](https://cloud.google.com/compute/docs/ip-addresses/reserve-static-internal-ip-address)
 
         ## Example Usage
+
         ### Address Basic
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
 
         ip_address = gcp.compute.Address("ip_address", name="my-address")
         ```
+        <!--End PulumiCodeChooser -->
         ### Address With Subnetwork
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -817,8 +821,10 @@ class Address(pulumi.CustomResource):
             address="10.0.42.42",
             region="us-central1")
         ```
+        <!--End PulumiCodeChooser -->
         ### Address With Gce Endpoint
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -828,8 +834,10 @@ class Address(pulumi.CustomResource):
             address_type="INTERNAL",
             purpose="GCE_ENDPOINT")
         ```
+        <!--End PulumiCodeChooser -->
         ### Instance With Ip
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -853,8 +861,10 @@ class Address(pulumi.CustomResource):
                 )],
             )])
         ```
+        <!--End PulumiCodeChooser -->
         ### Compute Address Ipsec Interconnect
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -870,20 +880,21 @@ class Address(pulumi.CustomResource):
             prefix_length=29,
             network=network.self_link)
         ```
+        <!--End PulumiCodeChooser -->
 
         ## Import
 
         Address can be imported using any of these accepted formats:
 
-         * `projects/{{project}}/regions/{{region}}/addresses/{{name}}`
+        * `projects/{{project}}/regions/{{region}}/addresses/{{name}}`
 
-         * `{{project}}/{{region}}/{{name}}`
+        * `{{project}}/{{region}}/{{name}}`
 
-         * `{{region}}/{{name}}`
+        * `{{region}}/{{name}}`
 
-         * `{{name}}`
+        * `{{name}}`
 
-         When using the `pulumi import` command, Address can be imported using one of the formats above. For example:
+        When using the `pulumi import` command, Address can be imported using one of the formats above. For example:
 
         ```sh
         $ pulumi import gcp:compute/address:Address default projects/{{project}}/regions/{{region}}/addresses/{{name}}
@@ -990,16 +1001,20 @@ class Address(pulumi.CustomResource):
             * [Reserving a Static Internal IP Address](https://cloud.google.com/compute/docs/ip-addresses/reserve-static-internal-ip-address)
 
         ## Example Usage
+
         ### Address Basic
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
 
         ip_address = gcp.compute.Address("ip_address", name="my-address")
         ```
+        <!--End PulumiCodeChooser -->
         ### Address With Subnetwork
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -1017,8 +1032,10 @@ class Address(pulumi.CustomResource):
             address="10.0.42.42",
             region="us-central1")
         ```
+        <!--End PulumiCodeChooser -->
         ### Address With Gce Endpoint
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -1028,8 +1045,10 @@ class Address(pulumi.CustomResource):
             address_type="INTERNAL",
             purpose="GCE_ENDPOINT")
         ```
+        <!--End PulumiCodeChooser -->
         ### Instance With Ip
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -1053,8 +1072,10 @@ class Address(pulumi.CustomResource):
                 )],
             )])
         ```
+        <!--End PulumiCodeChooser -->
         ### Compute Address Ipsec Interconnect
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -1070,20 +1091,21 @@ class Address(pulumi.CustomResource):
             prefix_length=29,
             network=network.self_link)
         ```
+        <!--End PulumiCodeChooser -->
 
         ## Import
 
         Address can be imported using any of these accepted formats:
 
-         * `projects/{{project}}/regions/{{region}}/addresses/{{name}}`
+        * `projects/{{project}}/regions/{{region}}/addresses/{{name}}`
 
-         * `{{project}}/{{region}}/{{name}}`
+        * `{{project}}/{{region}}/{{name}}`
 
-         * `{{region}}/{{name}}`
+        * `{{region}}/{{name}}`
 
-         * `{{name}}`
+        * `{{name}}`
 
-         When using the `pulumi import` command, Address can be imported using one of the formats above. For example:
+        When using the `pulumi import` command, Address can be imported using one of the formats above. For example:
 
         ```sh
         $ pulumi import gcp:compute/address:Address default projects/{{project}}/regions/{{region}}/addresses/{{name}}

pulumi_gcp/compute/attached_disk.py

@@ -334,6 +334,7 @@ class AttachedDisk(pulumi.CustomResource):
 
         ## Example Usage
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -354,16 +355,17 @@ class AttachedDisk(pulumi.CustomResource):
             disk=default_google_compute_disk["id"],
             instance=default_instance.id)
         ```
+        <!--End PulumiCodeChooser -->
 
         ## Import
 
         Attached Disk can be imported the following ways:
 
-         * `projects/{{project}}/zones/{{zone}}/instances/{{instance.name}}/{{disk.name}}`
+        * `projects/{{project}}/zones/{{zone}}/instances/{{instance.name}}/{{disk.name}}`
 
-         * `{{project}}/{{zone}}/{{instance.name}}/{{disk.name}}`
+        * `{{project}}/{{zone}}/{{instance.name}}/{{disk.name}}`
 
-         When using the `pulumi import` command, Attached Disk can be imported using one of the formats above. For example:
+        When using the `pulumi import` command, Attached Disk can be imported using one of the formats above. For example:
 
         ```sh
         $ pulumi import gcp:compute/attachedDisk:AttachedDisk default projects/{{project}}/zones/{{zone}}/instances/{{instance.name}}/{{disk.name}}
@@ -427,6 +429,7 @@ class AttachedDisk(pulumi.CustomResource):
 
         ## Example Usage
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_gcp as gcp
@@ -447,16 +450,17 @@ class AttachedDisk(pulumi.CustomResource):
             disk=default_google_compute_disk["id"],
             instance=default_instance.id)
         ```
+        <!--End PulumiCodeChooser -->
 
         ## Import
 
         Attached Disk can be imported the following ways:
 
-         * `projects/{{project}}/zones/{{zone}}/instances/{{instance.name}}/{{disk.name}}`
+        * `projects/{{project}}/zones/{{zone}}/instances/{{instance.name}}/{{disk.name}}`
 
-         * `{{project}}/{{zone}}/{{instance.name}}/{{disk.name}}`
+        * `{{project}}/{{zone}}/{{instance.name}}/{{disk.name}}`
 
-         When using the `pulumi import` command, Attached Disk can be imported using one of the formats above. For example:
+        When using the `pulumi import` command, Attached Disk can be imported using one of the formats above. For example:
 
         ```sh
         $ pulumi import gcp:compute/attachedDisk:AttachedDisk default projects/{{project}}/zones/{{zone}}/instances/{{instance.name}}/{{disk.name}}