pulumi-alicloud 3.78.0a1747200018__py3-none-any.whl → 3.79.0a1747372618__py3-none-any.whl

pulumi_alicloud/slb/master_slave_server_group.py

@@ -31,7 +31,7 @@ class MasterSlaveServerGroupArgs:
         :param pulumi.Input[builtins.str] load_balancer_id: The Load Balancer ID which is used to launch a new master slave server group.
         :param pulumi.Input[builtins.bool] delete_protection_validation: Checking DeleteProtection of SLB instance before deleting. If true, this resource will not be deleted when its SLB instance enabled DeleteProtection. Default to false.
         :param pulumi.Input[builtins.str] name: Name of the master slave server group.
-        :param pulumi.Input[Sequence[pulumi.Input['MasterSlaveServerGroupServerArgs']]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        :param pulumi.Input[Sequence[pulumi.Input['MasterSlaveServerGroupServerArgs']]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         pulumi.set(__self__, "load_balancer_id", load_balancer_id)
         if delete_protection_validation is not None:
@@ -81,7 +81,7 @@ class MasterSlaveServerGroupArgs:
     @pulumi.getter
     def servers(self) -> Optional[pulumi.Input[Sequence[pulumi.Input['MasterSlaveServerGroupServerArgs']]]]:
         """
-        A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         return pulumi.get(self, "servers")
 
@@ -102,7 +102,7 @@ class _MasterSlaveServerGroupState:
         :param pulumi.Input[builtins.bool] delete_protection_validation: Checking DeleteProtection of SLB instance before deleting. If true, this resource will not be deleted when its SLB instance enabled DeleteProtection. Default to false.
         :param pulumi.Input[builtins.str] load_balancer_id: The Load Balancer ID which is used to launch a new master slave server group.
         :param pulumi.Input[builtins.str] name: Name of the master slave server group.
-        :param pulumi.Input[Sequence[pulumi.Input['MasterSlaveServerGroupServerArgs']]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        :param pulumi.Input[Sequence[pulumi.Input['MasterSlaveServerGroupServerArgs']]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         if delete_protection_validation is not None:
             pulumi.set(__self__, "delete_protection_validation", delete_protection_validation)
@@ -153,7 +153,7 @@ class _MasterSlaveServerGroupState:
     @pulumi.getter
     def servers(self) -> Optional[pulumi.Input[Sequence[pulumi.Input['MasterSlaveServerGroupServerArgs']]]]:
         """
-        A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         return pulumi.get(self, "servers")
 
@@ -188,7 +188,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
 
         > **NOTE:** One VPC load balancer, its master slave server group can only add the same VPC ECS instances.
 
-        > **NOTE:** Available in 1.54.0+
+        > **NOTE:** Available since v1.54.0+
 
         ## Example Usage
 
@@ -199,7 +199,9 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
         ms_server_group = alicloud.get_zones(available_disk_category="cloud_efficiency",
             available_resource_creation="VSwitch")
         ms_server_group_get_instance_types = alicloud.ecs.get_instance_types(availability_zone=ms_server_group.zones[0].id,
-            eni_amount=2)
+            cpu_core_count=2,
+            memory_size=8,
+            instance_type_family="ecs.g6")
         image = alicloud.ecs.get_images(name_regex="^ubuntu_18.*64",
             most_recent=True,
             owners="system")
@@ -216,7 +218,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
             zone_id=ms_server_group.zones[0].id,
             vswitch_name=slb_master_slave_server_group)
         group = alicloud.ecs.SecurityGroup("group",
-            name=slb_master_slave_server_group,
+            security_group_name=slb_master_slave_server_group,
             vpc_id=main.id)
         ms_server_group_instance = []
         for range in [{"value": i} for i in range(0, 2)]:
@@ -277,17 +279,6 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
             established_timeout=600)
         ```
 
-        ## Block servers
-
-        The servers mapping supports the following:
-
-        * `server_ids` - (Required) A list backend server ID (ECS instance ID).
-        * `port` - (Required) The port used by the backend server. Valid value range: [1-65535].
-        * `weight` - (Optional) Weight of the backend server. Valid value range: [0-100]. Default to 100.
-        * `type` - (Optional, Available in 1.51.0+) Type of the backend server. Valid value ecs, eni. Default to eni.
-        * `server_type` - (Optional) The server type of the backend server. Valid value Master, Slave.
-        * `is_backup` - (Removed from v1.63.0) Determine if the server is executing. Valid value 0, 1.
-
         ## Import
 
         Load balancer master slave server group can be imported using the id, e.g.
@@ -301,7 +292,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
         :param pulumi.Input[builtins.bool] delete_protection_validation: Checking DeleteProtection of SLB instance before deleting. If true, this resource will not be deleted when its SLB instance enabled DeleteProtection. Default to false.
         :param pulumi.Input[builtins.str] load_balancer_id: The Load Balancer ID which is used to launch a new master slave server group.
         :param pulumi.Input[builtins.str] name: Name of the master slave server group.
-        :param pulumi.Input[Sequence[pulumi.Input[Union['MasterSlaveServerGroupServerArgs', 'MasterSlaveServerGroupServerArgsDict']]]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        :param pulumi.Input[Sequence[pulumi.Input[Union['MasterSlaveServerGroupServerArgs', 'MasterSlaveServerGroupServerArgsDict']]]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         ...
     @overload
@@ -324,7 +315,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
 
         > **NOTE:** One VPC load balancer, its master slave server group can only add the same VPC ECS instances.
 
-        > **NOTE:** Available in 1.54.0+
+        > **NOTE:** Available since v1.54.0+
 
         ## Example Usage
 
@@ -335,7 +326,9 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
         ms_server_group = alicloud.get_zones(available_disk_category="cloud_efficiency",
             available_resource_creation="VSwitch")
         ms_server_group_get_instance_types = alicloud.ecs.get_instance_types(availability_zone=ms_server_group.zones[0].id,
-            eni_amount=2)
+            cpu_core_count=2,
+            memory_size=8,
+            instance_type_family="ecs.g6")
         image = alicloud.ecs.get_images(name_regex="^ubuntu_18.*64",
             most_recent=True,
             owners="system")
@@ -352,7 +345,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
             zone_id=ms_server_group.zones[0].id,
             vswitch_name=slb_master_slave_server_group)
         group = alicloud.ecs.SecurityGroup("group",
-            name=slb_master_slave_server_group,
+            security_group_name=slb_master_slave_server_group,
             vpc_id=main.id)
         ms_server_group_instance = []
         for range in [{"value": i} for i in range(0, 2)]:
@@ -413,17 +406,6 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
             established_timeout=600)
         ```
 
-        ## Block servers
-
-        The servers mapping supports the following:
-
-        * `server_ids` - (Required) A list backend server ID (ECS instance ID).
-        * `port` - (Required) The port used by the backend server. Valid value range: [1-65535].
-        * `weight` - (Optional) Weight of the backend server. Valid value range: [0-100]. Default to 100.
-        * `type` - (Optional, Available in 1.51.0+) Type of the backend server. Valid value ecs, eni. Default to eni.
-        * `server_type` - (Optional) The server type of the backend server. Valid value Master, Slave.
-        * `is_backup` - (Removed from v1.63.0) Determine if the server is executing. Valid value 0, 1.
-
         ## Import
 
         Load balancer master slave server group can be imported using the id, e.g.
@@ -490,7 +472,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
         :param pulumi.Input[builtins.bool] delete_protection_validation: Checking DeleteProtection of SLB instance before deleting. If true, this resource will not be deleted when its SLB instance enabled DeleteProtection. Default to false.
         :param pulumi.Input[builtins.str] load_balancer_id: The Load Balancer ID which is used to launch a new master slave server group.
         :param pulumi.Input[builtins.str] name: Name of the master slave server group.
-        :param pulumi.Input[Sequence[pulumi.Input[Union['MasterSlaveServerGroupServerArgs', 'MasterSlaveServerGroupServerArgsDict']]]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        :param pulumi.Input[Sequence[pulumi.Input[Union['MasterSlaveServerGroupServerArgs', 'MasterSlaveServerGroupServerArgsDict']]]] servers: A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         opts = pulumi.ResourceOptions.merge(opts, pulumi.ResourceOptions(id=id))
 
@@ -530,7 +512,7 @@ class MasterSlaveServerGroup(pulumi.CustomResource):
     @pulumi.getter
     def servers(self) -> pulumi.Output[Optional[Sequence['outputs.MasterSlaveServerGroupServer']]]:
         """
-        A list of ECS instances to be added. Only two ECS instances can be supported in one resource. It contains six sub-fields as `Block server` follows.
+        A list of ECS instances to be added. Only two ECS instances can be supported in one resource. See `servers` below.
         """
         return pulumi.get(self, "servers")
 

pulumi_alicloud/slb/outputs.py

@@ -235,6 +235,14 @@ class MasterSlaveServerGroupServer(dict):
                  server_type: Optional[builtins.str] = None,
                  type: Optional[builtins.str] = None,
                  weight: Optional[builtins.int] = None):
+        """
+        :param builtins.int port: The port used by the backend server. Valid value range: [1-65535].
+        :param builtins.str server_id: A list backend server ID (ECS instance ID).
+        :param builtins.int is_backup: Determine if the server is executing. Valid value 0, 1.
+        :param builtins.str server_type: The server type of the backend server. Valid value Master, Slave.
+        :param builtins.str type: Type of the backend server. Valid value ecs, eni. Default to eni.
+        :param builtins.int weight: Weight of the backend server. Valid value range: [0-100]. Default to 100.
+        """
         pulumi.set(__self__, "port", port)
         pulumi.set(__self__, "server_id", server_id)
         if is_backup is not None:
@@ -249,31 +257,49 @@ class MasterSlaveServerGroupServer(dict):
     @property
     @pulumi.getter
     def port(self) -> builtins.int:
+        """
+        The port used by the backend server. Valid value range: [1-65535].
+        """
         return pulumi.get(self, "port")
 
     @property
     @pulumi.getter(name="serverId")
     def server_id(self) -> builtins.str:
+        """
+        A list backend server ID (ECS instance ID).
+        """
         return pulumi.get(self, "server_id")
 
     @property
     @pulumi.getter(name="isBackup")
     def is_backup(self) -> Optional[builtins.int]:
+        """
+        Determine if the server is executing. Valid value 0, 1.
+        """
         return pulumi.get(self, "is_backup")
 
     @property
     @pulumi.getter(name="serverType")
     def server_type(self) -> Optional[builtins.str]:
+        """
+        The server type of the backend server. Valid value Master, Slave.
+        """
         return pulumi.get(self, "server_type")
 
     @property
     @pulumi.getter
     def type(self) -> Optional[builtins.str]:
+        """
+        Type of the backend server. Valid value ecs, eni. Default to eni.
+        """
         return pulumi.get(self, "type")
 
     @property
     @pulumi.getter
     def weight(self) -> Optional[builtins.int]:
+        """
+        Weight of the backend server. Valid value range: [0-100]. Default to 100.
+        """
         return pulumi.get(self, "weight")
 
 

pulumi_alicloud/sms/short_url.py

@@ -157,7 +157,7 @@ class ShortUrl(pulumi.CustomResource):
 
         For information about SMS Short Url and how to use it, see [What is Short Url](https://next.api.alibabacloud.com/api/Dysmsapi/2017-05-25/AddShortUrl).
 
-        > **NOTE:** Available in v1.178.0+.
+        > **NOTE:** Available since v1.178.0.
 
         ## Example Usage
 
@@ -198,7 +198,7 @@ class ShortUrl(pulumi.CustomResource):
 
         For information about SMS Short Url and how to use it, see [What is Short Url](https://next.api.alibabacloud.com/api/Dysmsapi/2017-05-25/AddShortUrl).
 
-        > **NOTE:** Available in v1.178.0+.
+        > **NOTE:** Available since v1.178.0.
 
         ## Example Usage
 

pulumi_alicloud/threatdetection/backup_policy.py

@@ -222,7 +222,7 @@ class BackupPolicy(pulumi.CustomResource):
 
         For information about Threat Detection Backup Policy and how to use it, see [What is Backup Policy](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-createbackuppolicy).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 
@@ -267,7 +267,7 @@ class BackupPolicy(pulumi.CustomResource):
 
         For information about Threat Detection Backup Policy and how to use it, see [What is Backup Policy](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-createbackuppolicy).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 

pulumi_alicloud/threatdetection/honeypot_probe.py

@@ -439,7 +439,7 @@ class HoneypotProbe(pulumi.CustomResource):
 
         For information about Threat Detection Honeypot Probe and how to use it, see [What is Honeypot Probe](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-createhoneypotprobe).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 
@@ -498,7 +498,7 @@ class HoneypotProbe(pulumi.CustomResource):
 
         For information about Threat Detection Honeypot Probe and how to use it, see [What is Honeypot Probe](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-createhoneypotprobe).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 

pulumi_alicloud/threatdetection/instance.py

@@ -83,6 +83,7 @@ class InstanceArgs:
                - `AGENTLESS`: AGENTLESS detection module
                - `SERVERLESS`:Serverless asset module
                - `CTDR`: threat analysis and response module
+               - `POST_HOST`: Host and container security module
                - Value:0 means off, 1 means on
                
                > **NOTE:**  The module value of the unpassed value will not change.
@@ -133,10 +134,10 @@ class InstanceArgs:
                > **NOTE:**  This module can only be purchased when Threat_analysis_switch = 1. The step size is 10, that is, only multiples of 10 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_flow: Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  Step size is 1.
-        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+               > **NOTE:**  Step size is 100.
+        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+               > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_switch: Threat analysis. Value:
                - 0: No.
                - 1: Yes.
@@ -360,6 +361,7 @@ class InstanceArgs:
         - `AGENTLESS`: AGENTLESS detection module
         - `SERVERLESS`:Serverless asset module
         - `CTDR`: threat analysis and response module
+        - `POST_HOST`: Host and container security module
         - Value:0 means off, 1 means on
 
         > **NOTE:**  The module value of the unpassed value will not change.
@@ -586,7 +588,7 @@ class InstanceArgs:
         """
         Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
 
-        > **NOTE:**  Step size is 1.
+        > **NOTE:**  Step size is 100.
         """
         return pulumi.get(self, "threat_analysis_flow")
 
@@ -598,9 +600,9 @@ class InstanceArgs:
     @pulumi.getter(name="threatAnalysisSlsStorage")
     def threat_analysis_sls_storage(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+        Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
 
-        > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+        > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         """
         return pulumi.get(self, "threat_analysis_sls_storage")
 
@@ -765,6 +767,7 @@ class _InstanceState:
                - `AGENTLESS`: AGENTLESS detection module
                - `SERVERLESS`:Serverless asset module
                - `CTDR`: threat analysis and response module
+               - `POST_HOST`: Host and container security module
                - Value:0 means off, 1 means on
                
                > **NOTE:**  The module value of the unpassed value will not change.
@@ -816,10 +819,10 @@ class _InstanceState:
                > **NOTE:**  This module can only be purchased when Threat_analysis_switch = 1. The step size is 10, that is, only multiples of 10 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_flow: Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  Step size is 1.
-        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+               > **NOTE:**  Step size is 100.
+        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+               > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_switch: Threat analysis. Value:
                - 0: No.
                - 1: Yes.
@@ -1060,6 +1063,7 @@ class _InstanceState:
         - `AGENTLESS`: AGENTLESS detection module
         - `SERVERLESS`:Serverless asset module
         - `CTDR`: threat analysis and response module
+        - `POST_HOST`: Host and container security module
         - Value:0 means off, 1 means on
 
         > **NOTE:**  The module value of the unpassed value will not change.
@@ -1298,7 +1302,7 @@ class _InstanceState:
         """
         Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
 
-        > **NOTE:**  Step size is 1.
+        > **NOTE:**  Step size is 100.
         """
         return pulumi.get(self, "threat_analysis_flow")
 
@@ -1310,9 +1314,9 @@ class _InstanceState:
     @pulumi.getter(name="threatAnalysisSlsStorage")
     def threat_analysis_sls_storage(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+        Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
 
-        > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+        > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         """
         return pulumi.get(self, "threat_analysis_sls_storage")
 
@@ -1487,6 +1491,7 @@ class Instance(pulumi.CustomResource):
                - `AGENTLESS`: AGENTLESS detection module
                - `SERVERLESS`:Serverless asset module
                - `CTDR`: threat analysis and response module
+               - `POST_HOST`: Host and container security module
                - Value:0 means off, 1 means on
                
                > **NOTE:**  The module value of the unpassed value will not change.
@@ -1537,10 +1542,10 @@ class Instance(pulumi.CustomResource):
                > **NOTE:**  This module can only be purchased when Threat_analysis_switch = 1. The step size is 10, that is, only multiples of 10 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_flow: Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  Step size is 1.
-        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+               > **NOTE:**  Step size is 100.
+        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+               > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_switch: Threat analysis. Value:
                - 0: No.
                - 1: Yes.
@@ -1753,6 +1758,7 @@ class Instance(pulumi.CustomResource):
                - `AGENTLESS`: AGENTLESS detection module
                - `SERVERLESS`:Serverless asset module
                - `CTDR`: threat analysis and response module
+               - `POST_HOST`: Host and container security module
                - Value:0 means off, 1 means on
                
                > **NOTE:**  The module value of the unpassed value will not change.
@@ -1804,10 +1810,10 @@ class Instance(pulumi.CustomResource):
                > **NOTE:**  This module can only be purchased when Threat_analysis_switch = 1. The step size is 10, that is, only multiples of 10 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_flow: Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  Step size is 1.
-        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+               > **NOTE:**  Step size is 100.
+        :param pulumi.Input[builtins.str] threat_analysis_sls_storage: Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
                
-               > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+               > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         :param pulumi.Input[builtins.str] threat_analysis_switch: Threat analysis. Value:
                - 0: No.
                - 1: Yes.
@@ -1975,6 +1981,7 @@ class Instance(pulumi.CustomResource):
         - `AGENTLESS`: AGENTLESS detection module
         - `SERVERLESS`:Serverless asset module
         - `CTDR`: threat analysis and response module
+        - `POST_HOST`: Host and container security module
         - Value:0 means off, 1 means on
 
         > **NOTE:**  The module value of the unpassed value will not change.
@@ -2145,7 +2152,7 @@ class Instance(pulumi.CustomResource):
         """
         Threat analysis and response log access traffic. After ThreatAnalysisSwitch1 is selected, it must be selected. Interval type, value interval:[0,9999999999].
 
-        > **NOTE:**  Step size is 1.
+        > **NOTE:**  Step size is 100.
         """
         return pulumi.get(self, "threat_analysis_flow")
 
@@ -2153,9 +2160,9 @@ class Instance(pulumi.CustomResource):
     @pulumi.getter(name="threatAnalysisSlsStorage")
     def threat_analysis_sls_storage(self) -> pulumi.Output[Optional[builtins.str]]:
         """
-        Threat analysis and response log storage capacity. Interval type, value interval:[100,9999999999].
+        Threat analysis and response log storage capacity. Interval type, value interval:[0,9999999999].
 
-        > **NOTE:**  The step size is 100, that is, only multiples of 100 can be filled in.
+        > **NOTE:**  The step size is 1000, that is, only multiples of 1000 can be filled in.
         """
         return pulumi.get(self, "threat_analysis_sls_storage")
 

pulumi_alicloud/threatdetection/outputs.py

@@ -389,17 +389,59 @@ class GetAntiBruteForceRulesRuleResult(dict):
 @pulumi.output_type
 class GetAssetsAssetResult(dict):
     def __init__(__self__, *,
+                 cluster_id: builtins.str,
+                 cluster_name: builtins.str,
                  create_time: builtins.str,
                  id: builtins.str,
-                 uuid: builtins.str):
+                 instance_id: builtins.str,
+                 instance_name: builtins.str,
+                 internet_ip: builtins.str,
+                 intranet_ip: builtins.str,
+                 status: builtins.str,
+                 uuid: builtins.str,
+                 vpc_instance_id: builtins.str):
         """
+        :param builtins.str cluster_id: The ID of the cluster.
+        :param builtins.str cluster_name: The name of the cluster.
         :param builtins.str create_time: The creation time of the resource
-        :param builtins.str id: The ID of the instance.
-        :param builtins.str uuid: The UUID of the instance.
-        """
+        :param builtins.str id: The UUID of the asset.
+        :param builtins.str instance_id: The ID of the asset.
+        :param builtins.str instance_name: The name of the asset.
+        :param builtins.str internet_ip: The public IP address of the asset.
+        :param builtins.str intranet_ip: The private IP address of the asset.
+        :param builtins.str status: The status of the asset. Valid values:
+               - **Running**: running
+               - **notRunning**: stopped
+        :param builtins.str uuid: The UUID of the asset. Same as `id`.
+        :param builtins.str vpc_instance_id: The ID of the VPC to which the asset belongs.
+        """
+        pulumi.set(__self__, "cluster_id", cluster_id)
+        pulumi.set(__self__, "cluster_name", cluster_name)
         pulumi.set(__self__, "create_time", create_time)
         pulumi.set(__self__, "id", id)
+        pulumi.set(__self__, "instance_id", instance_id)
+        pulumi.set(__self__, "instance_name", instance_name)
+        pulumi.set(__self__, "internet_ip", internet_ip)
+        pulumi.set(__self__, "intranet_ip", intranet_ip)
+        pulumi.set(__self__, "status", status)
         pulumi.set(__self__, "uuid", uuid)
+        pulumi.set(__self__, "vpc_instance_id", vpc_instance_id)
+
+    @property
+    @pulumi.getter(name="clusterId")
+    def cluster_id(self) -> builtins.str:
+        """
+        The ID of the cluster.
+        """
+        return pulumi.get(self, "cluster_id")
+
+    @property
+    @pulumi.getter(name="clusterName")
+    def cluster_name(self) -> builtins.str:
+        """
+        The name of the cluster.
+        """
+        return pulumi.get(self, "cluster_name")
 
     @property
     @pulumi.getter(name="createTime")
@@ -413,18 +455,68 @@ class GetAssetsAssetResult(dict):
     @pulumi.getter
     def id(self) -> builtins.str:
         """
-        The ID of the instance.
+        The UUID of the asset.
         """
         return pulumi.get(self, "id")
 
+    @property
+    @pulumi.getter(name="instanceId")
+    def instance_id(self) -> builtins.str:
+        """
+        The ID of the asset.
+        """
+        return pulumi.get(self, "instance_id")
+
+    @property
+    @pulumi.getter(name="instanceName")
+    def instance_name(self) -> builtins.str:
+        """
+        The name of the asset.
+        """
+        return pulumi.get(self, "instance_name")
+
+    @property
+    @pulumi.getter(name="internetIp")
+    def internet_ip(self) -> builtins.str:
+        """
+        The public IP address of the asset.
+        """
+        return pulumi.get(self, "internet_ip")
+
+    @property
+    @pulumi.getter(name="intranetIp")
+    def intranet_ip(self) -> builtins.str:
+        """
+        The private IP address of the asset.
+        """
+        return pulumi.get(self, "intranet_ip")
+
+    @property
+    @pulumi.getter
+    def status(self) -> builtins.str:
+        """
+        The status of the asset. Valid values:
+        - **Running**: running
+        - **notRunning**: stopped
+        """
+        return pulumi.get(self, "status")
+
     @property
     @pulumi.getter
     def uuid(self) -> builtins.str:
         """
-        The UUID of the instance.
+        The UUID of the asset. Same as `id`.
         """
         return pulumi.get(self, "uuid")
 
+    @property
+    @pulumi.getter(name="vpcInstanceId")
+    def vpc_instance_id(self) -> builtins.str:
+        """
+        The ID of the VPC to which the asset belongs.
+        """
+        return pulumi.get(self, "vpc_instance_id")
+
 
 @pulumi.output_type
 class GetBackupPoliciesPolicyResult(dict):

pulumi_alicloud/threatdetection/vul_whitelist.py

@@ -143,7 +143,7 @@ class VulWhitelist(pulumi.CustomResource):
 
         For information about Threat Detection Vul Whitelist and how to use it, see [What is Vul Whitelist](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-modifycreatevulwhitelist).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 
@@ -184,7 +184,7 @@ class VulWhitelist(pulumi.CustomResource):
 
         For information about Threat Detection Vul Whitelist and how to use it, see [What is Vul Whitelist](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-modifycreatevulwhitelist).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 

pulumi_alicloud/threatdetection/web_lock_config.py

@@ -337,7 +337,7 @@ class WebLockConfig(pulumi.CustomResource):
 
         For information about Threat Detection Web Lock Config and how to use it, see [What is Web Lock Config](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-modifyweblockstart).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 
@@ -388,7 +388,7 @@ class WebLockConfig(pulumi.CustomResource):
 
         For information about Threat Detection Web Lock Config and how to use it, see [What is Web Lock Config](https://www.alibabacloud.com/help/en/security-center/developer-reference/api-sas-2018-12-03-modifyweblockstart).
 
-        > **NOTE:** Available in v1.195.0+.
+        > **NOTE:** Available since v1.195.0.
 
         ## Example Usage
 

pulumi_alicloud/tsdb/instance.py

@@ -475,7 +475,7 @@ class Instance(pulumi.CustomResource):
 
         For information about Time Series Database (TSDB) Instance and how to use it, see [What is Time Series Database (TSDB)](https://www.alibabacloud.com/help/en/doc-detail/55652.htm).
 
-        > **NOTE:** Available in v1.112.0+.
+        > **NOTE:** Available since v1.112.0.
 
         > **DEPRECATED:**  This resource has been [deprecated](https://www.alibabacloud.com/en/notice/0313tsdb?_p_lc=1) from version `1.223.1`.
 
@@ -558,7 +558,7 @@ class Instance(pulumi.CustomResource):
 
         For information about Time Series Database (TSDB) Instance and how to use it, see [What is Time Series Database (TSDB)](https://www.alibabacloud.com/help/en/doc-detail/55652.htm).
 
-        > **NOTE:** Available in v1.112.0+.
+        > **NOTE:** Available since v1.112.0.
 
         > **DEPRECATED:**  This resource has been [deprecated](https://www.alibabacloud.com/en/notice/0313tsdb?_p_lc=1) from version `1.223.1`.