pulumi-alicloud 3.77.0a1746163013__py3-none-any.whl → 3.78.0__py3-none-any.whl

pulumi_alicloud/cassandra/cluster.py

@@ -708,10 +708,8 @@ class _ClusterState:
         pulumi.set(self, "zone_id", value)
 
 
+@pulumi.type_token("alicloud:cassandra/cluster:Cluster")
 class Cluster(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cassandra/cluster:Cluster"
-
     @overload
     def __init__(__self__,
                  resource_name: str,
@@ -743,7 +741,7 @@ class Cluster(pulumi.CustomResource):
         It offers a full range of database solutions, such as disaster recovery, backup, recovery, monitoring, and alarms.
         You can see detail product introduction [here](https://www.alibabacloud.com/help/product/49055.htm).
 
-        > **NOTE:**  Available in 1.88.0+.
+        > **NOTE:** Available since v1.88.0.
 
         > **NOTE:**  The following regions support create Vpc network Cassandra cluster.
         The official website mark more regions. Or you can call [DescribeRegions](https://help.aliyun.com/document_detail/157540.html).
@@ -821,7 +819,7 @@ class Cluster(pulumi.CustomResource):
         It offers a full range of database solutions, such as disaster recovery, backup, recovery, monitoring, and alarms.
         You can see detail product introduction [here](https://www.alibabacloud.com/help/product/49055.htm).
 
-        > **NOTE:**  Available in 1.88.0+.
+        > **NOTE:** Available since v1.88.0.
 
         > **NOTE:**  The following regions support create Vpc network Cassandra cluster.
         The official website mark more regions. Or you can call [DescribeRegions](https://help.aliyun.com/document_detail/157540.html).

pulumi_alicloud/cassandra/data_center.py

@@ -504,10 +504,8 @@ class _DataCenterState:
         pulumi.set(self, "zone_id", value)
 
 
+@pulumi.type_token("alicloud:cassandra/dataCenter:DataCenter")
 class DataCenter(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cassandra/dataCenter:DataCenter"
-
     @overload
     def __init__(__self__,
                  resource_name: str,
@@ -532,7 +530,7 @@ class DataCenter(pulumi.CustomResource):
         It offers a full range of database solutions, such as disaster recovery, backup, recovery, monitoring, and alarms.
         You can see detail product introduction [here](https://www.alibabacloud.com/help/product/49055.htm).
 
-        > **NOTE:**  Available in 1.88.0+.
+        > **NOTE:** Available since v1.88.0.
 
         > **NOTE:**  Create a cassandra dataCenter need a clusterId,so need create a cassandra cluster first.
 
@@ -618,7 +616,7 @@ class DataCenter(pulumi.CustomResource):
         It offers a full range of database solutions, such as disaster recovery, backup, recovery, monitoring, and alarms.
         You can see detail product introduction [here](https://www.alibabacloud.com/help/product/49055.htm).
 
-        > **NOTE:**  Available in 1.88.0+.
+        > **NOTE:** Available since v1.88.0.
 
         > **NOTE:**  Create a cassandra dataCenter need a clusterId,so need create a cassandra cluster first.
 

pulumi_alicloud/cddc/dedicated_host.py

@@ -488,10 +488,8 @@ class _DedicatedHostState:
         pulumi.set(self, "zone_id", value)
 
 
+@pulumi.type_token("alicloud:cddc/dedicatedHost:DedicatedHost")
 class DedicatedHost(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cddc/dedicatedHost:DedicatedHost"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cddc/dedicated_host_account.py

@@ -158,10 +158,8 @@ class _DedicatedHostAccountState:
         pulumi.set(self, "dedicated_host_id", value)
 
 
+@pulumi.type_token("alicloud:cddc/dedicatedHostAccount:DedicatedHostAccount")
 class DedicatedHostAccount(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cddc/dedicatedHostAccount:DedicatedHostAccount"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cddc/dedicated_host_group.py

@@ -323,10 +323,8 @@ class _DedicatedHostGroupState:
         pulumi.set(self, "vpc_id", value)
 
 
+@pulumi.type_token("alicloud:cddc/dedicatedHostGroup:DedicatedHostGroup")
 class DedicatedHostGroup(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cddc/dedicatedHostGroup:DedicatedHostGroup"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cddc/dedicated_propre_host.py

@@ -944,10 +944,8 @@ class _DedicatedPropreHostState:
         pulumi.set(self, "vswitch_id", value)
 
 
+@pulumi.type_token("alicloud:cddc/dedicatedPropreHost:DedicatedPropreHost")
 class DedicatedPropreHost(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cddc/dedicatedPropreHost:DedicatedPropreHost"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cdn/domain.py

@@ -585,10 +585,8 @@ class _DomainState:
         pulumi.set(self, "video_seek_enable", value)
 
 
+@pulumi.type_token("alicloud:cdn/domain:Domain")
 class Domain(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cdn/domain:Domain"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cdn/domain_config.py

@@ -192,10 +192,8 @@ class _DomainConfigState:
         pulumi.set(self, "status", value)
 
 
+@pulumi.type_token("alicloud:cdn/domainConfig:DomainConfig")
 class DomainConfig(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cdn/domainConfig:DomainConfig"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cdn/domain_new.py

@@ -368,10 +368,8 @@ class _DomainNewState:
         pulumi.set(self, "tags", value)
 
 
+@pulumi.type_token("alicloud:cdn/domainNew:DomainNew")
 class DomainNew(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cdn/domainNew:DomainNew"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cdn/fc_trigger.py

@@ -251,10 +251,8 @@ class _FcTriggerState:
         pulumi.set(self, "trigger_arn", value)
 
 
+@pulumi.type_token("alicloud:cdn/fcTrigger:FcTrigger")
 class FcTrigger(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cdn/fcTrigger:FcTrigger"
-
     @overload
     def __init__(__self__,
                  resource_name: str,
@@ -272,7 +270,7 @@ class FcTrigger(pulumi.CustomResource):
 
         For information about CDN Fc Trigger and how to use it, see [What is Fc Trigger](https://www.alibabacloud.com/help/en/cdn/developer-reference/api-cdn-2018-05-10-addfctrigger).
 
-        > **NOTE:** Available in v1.165.0+.
+        > **NOTE:** Available since v1.165.0.
 
         ## Example Usage
 
@@ -322,7 +320,7 @@ class FcTrigger(pulumi.CustomResource):
 
         For information about CDN Fc Trigger and how to use it, see [What is Fc Trigger](https://www.alibabacloud.com/help/en/cdn/developer-reference/api-cdn-2018-05-10-addfctrigger).
 
-        > **NOTE:** Available in v1.165.0+.
+        > **NOTE:** Available since v1.165.0.
 
         ## Example Usage
 

pulumi_alicloud/cdn/real_time_log_delivery.py

@@ -213,10 +213,8 @@ class _RealTimeLogDeliveryState:
         pulumi.set(self, "status", value)
 
 
+@pulumi.type_token("alicloud:cdn/realTimeLogDelivery:RealTimeLogDelivery")
 class RealTimeLogDelivery(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cdn/realTimeLogDelivery:RealTimeLogDelivery"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/_inputs.py

@@ -32,45 +32,62 @@ if not MYPY:
     class TrafficMarkingPolicyTrafficMatchRuleArgsDict(TypedDict):
         address_family: NotRequired[pulumi.Input[builtins.str]]
         """
-        IP Address Family.
+        IP Address Family
         """
         dst_cidr: NotRequired[pulumi.Input[builtins.str]]
         """
-        The destination network segment of the traffic message.  The flow classification matches the traffic of the destination IP address in the destination network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination IP address.
+        The destination network segment of the traffic message.
+        The flow classification matches the traffic of the destination IP address in the destination network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination IP address.
         """
         dst_port_ranges: NotRequired[pulumi.Input[Sequence[pulumi.Input[builtins.int]]]]
         """
-        The destination port of the traffic message. Valid values: **-1**, `1` to `65535`.  The flow classification rule matches the traffic of the destination port number in the destination port range. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination port number.  The current parameter supports a maximum of 2 port numbers. The input format is described as follows:
+        The destination port of the traffic message. Valid values: **-1**, `1` to `65535`.
+
+        The flow classification rule matches the traffic of the destination port number in the destination port range. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination port number.
+
+        The current parameter supports a maximum of 2 port numbers. The input format is described as follows:
         - If you only enter a port number, such as 1, the system defaults to match the traffic with the destination port of 1.
         - If you enter 2 port numbers, such as 1 and 200, the system defaults to match the traffic of the destination port in the range of 1 to 200.
         - If you enter 2 port numbers and one of them is - 1, the other port must also be - 1, indicating that it matches any destination port.
         """
         match_dscp: NotRequired[pulumi.Input[builtins.int]]
         """
-        The DSCP value of the traffic message. Valid values: `0` to **63 * *.  The flow classification rule matches the flow with the specified DSCP value. If the flow classification rule is not set, it means that the flow classification rule matches the flow with any DSCP value.> **NOTE:**  The current DSCP value refers to the DSCP value that the traffic message has carried before entering the cross-region connection.
+        The DSCP value of the traffic message. Valid values: `0` to **63 * *.
+
+        The flow classification rule matches the flow with the specified DSCP value. If the flow classification rule is not set, it means that the flow classification rule matches the flow with any DSCP value.
+
+        > **NOTE:**  The current DSCP value refers to the DSCP value that the traffic message has carried before entering the cross-region connection.
         """
         protocol: NotRequired[pulumi.Input[builtins.str]]
         """
-        The protocol type of the traffic message.  Stream classification rules can match traffic of multiple protocol types, such as `HTTP`, `HTTPS`, `TCP`, `UDP`, `SSH`, and **Telnet. For more protocol types, please log on to the [Cloud Enterprise Network Management Console](https://cen.console.aliyun.com/cen/list) to view.
+        The protocol type of the traffic message.
+        Stream classification rules can match traffic of multiple protocol types, such as `HTTP`, `HTTPS`, `TCP`, `UDP`, `SSH`, and **Telnet. For more protocol types, please log on to the [Cloud Enterprise Network Management Console](https://cen.console.aliyun.com/cen/list) to view.
         """
         src_cidr: NotRequired[pulumi.Input[builtins.str]]
         """
-        The source network segment of the traffic message.  The flow classification rule matches the traffic of the source IP address in the source network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any source IP address.
+        The source network segment of the traffic message.
+        The flow classification rule matches the traffic of the source IP address in the source network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any source IP address.
         """
         src_port_ranges: NotRequired[pulumi.Input[Sequence[pulumi.Input[builtins.int]]]]
         """
-        The source port of the traffic message. Valid values: **-1**, `1` to `65535`.  The flow classification rule matches the traffic of the source port number in the source port range. If it is not set, it means that the flow classification rule matches the traffic of any source port number.  The current parameter supports entering up to two port numbers. The input format is described as follows:
+        The source port of the traffic message. Valid values: **-1**, `1` to `65535`.
+
+        The flow classification rule matches the traffic of the source port number in the source port range. If it is not set, it means that the flow classification rule matches the traffic of any source port number.
+
+        The current parameter supports entering up to two port numbers. The input format is described as follows:
         - If you only enter a port number, such as 1, the system defaults to match the traffic with source port 1.
         - If you enter two port numbers, such as 1 and 200, the system defaults to match the traffic with the source port in the range of 1 to 200.
         - If you enter two port numbers and one of them is - 1, the other port must also be - 1, indicating that it matches any source port.
         """
         traffic_match_rule_description: NotRequired[pulumi.Input[builtins.str]]
         """
-        The description information of the stream classification rule.  The description must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
+        The description information of the stream classification rule.
+        The description must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
         """
         traffic_match_rule_name: NotRequired[pulumi.Input[builtins.str]]
         """
-        The name of the stream classification rule.  The name must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
+        The name of the stream classification rule.
+        The name must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
         """
 elif False:
     TrafficMarkingPolicyTrafficMatchRuleArgsDict: TypeAlias = Mapping[str, Any]
@@ -88,21 +105,38 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
                  traffic_match_rule_description: Optional[pulumi.Input[builtins.str]] = None,
                  traffic_match_rule_name: Optional[pulumi.Input[builtins.str]] = None):
         """
-        :param pulumi.Input[builtins.str] address_family: IP Address Family.
-        :param pulumi.Input[builtins.str] dst_cidr: The destination network segment of the traffic message.  The flow classification matches the traffic of the destination IP address in the destination network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination IP address.
-        :param pulumi.Input[Sequence[pulumi.Input[builtins.int]]] dst_port_ranges: The destination port of the traffic message. Valid values: **-1**, `1` to `65535`.  The flow classification rule matches the traffic of the destination port number in the destination port range. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination port number.  The current parameter supports a maximum of 2 port numbers. The input format is described as follows:
+        :param pulumi.Input[builtins.str] address_family: IP Address Family
+        :param pulumi.Input[builtins.str] dst_cidr: The destination network segment of the traffic message.
+               The flow classification matches the traffic of the destination IP address in the destination network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination IP address.
+        :param pulumi.Input[Sequence[pulumi.Input[builtins.int]]] dst_port_ranges: The destination port of the traffic message. Valid values: **-1**, `1` to `65535`.
+               
+               The flow classification rule matches the traffic of the destination port number in the destination port range. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination port number.
+               
+               The current parameter supports a maximum of 2 port numbers. The input format is described as follows:
                - If you only enter a port number, such as 1, the system defaults to match the traffic with the destination port of 1.
                - If you enter 2 port numbers, such as 1 and 200, the system defaults to match the traffic of the destination port in the range of 1 to 200.
                - If you enter 2 port numbers and one of them is - 1, the other port must also be - 1, indicating that it matches any destination port.
-        :param pulumi.Input[builtins.int] match_dscp: The DSCP value of the traffic message. Valid values: `0` to **63 * *.  The flow classification rule matches the flow with the specified DSCP value. If the flow classification rule is not set, it means that the flow classification rule matches the flow with any DSCP value.> **NOTE:**  The current DSCP value refers to the DSCP value that the traffic message has carried before entering the cross-region connection.
-        :param pulumi.Input[builtins.str] protocol: The protocol type of the traffic message.  Stream classification rules can match traffic of multiple protocol types, such as `HTTP`, `HTTPS`, `TCP`, `UDP`, `SSH`, and **Telnet. For more protocol types, please log on to the [Cloud Enterprise Network Management Console](https://cen.console.aliyun.com/cen/list) to view.
-        :param pulumi.Input[builtins.str] src_cidr: The source network segment of the traffic message.  The flow classification rule matches the traffic of the source IP address in the source network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any source IP address.
-        :param pulumi.Input[Sequence[pulumi.Input[builtins.int]]] src_port_ranges: The source port of the traffic message. Valid values: **-1**, `1` to `65535`.  The flow classification rule matches the traffic of the source port number in the source port range. If it is not set, it means that the flow classification rule matches the traffic of any source port number.  The current parameter supports entering up to two port numbers. The input format is described as follows:
+        :param pulumi.Input[builtins.int] match_dscp: The DSCP value of the traffic message. Valid values: `0` to **63 * *.
+               
+               The flow classification rule matches the flow with the specified DSCP value. If the flow classification rule is not set, it means that the flow classification rule matches the flow with any DSCP value.
+               
+               > **NOTE:**  The current DSCP value refers to the DSCP value that the traffic message has carried before entering the cross-region connection.
+        :param pulumi.Input[builtins.str] protocol: The protocol type of the traffic message.
+               Stream classification rules can match traffic of multiple protocol types, such as `HTTP`, `HTTPS`, `TCP`, `UDP`, `SSH`, and **Telnet. For more protocol types, please log on to the [Cloud Enterprise Network Management Console](https://cen.console.aliyun.com/cen/list) to view.
+        :param pulumi.Input[builtins.str] src_cidr: The source network segment of the traffic message.
+               The flow classification rule matches the traffic of the source IP address in the source network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any source IP address.
+        :param pulumi.Input[Sequence[pulumi.Input[builtins.int]]] src_port_ranges: The source port of the traffic message. Valid values: **-1**, `1` to `65535`.
+               
+               The flow classification rule matches the traffic of the source port number in the source port range. If it is not set, it means that the flow classification rule matches the traffic of any source port number.
+               
+               The current parameter supports entering up to two port numbers. The input format is described as follows:
                - If you only enter a port number, such as 1, the system defaults to match the traffic with source port 1.
                - If you enter two port numbers, such as 1 and 200, the system defaults to match the traffic with the source port in the range of 1 to 200.
                - If you enter two port numbers and one of them is - 1, the other port must also be - 1, indicating that it matches any source port.
-        :param pulumi.Input[builtins.str] traffic_match_rule_description: The description information of the stream classification rule.  The description must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
-        :param pulumi.Input[builtins.str] traffic_match_rule_name: The name of the stream classification rule.  The name must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
+        :param pulumi.Input[builtins.str] traffic_match_rule_description: The description information of the stream classification rule.
+               The description must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
+        :param pulumi.Input[builtins.str] traffic_match_rule_name: The name of the stream classification rule.
+               The name must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
         """
         if address_family is not None:
             pulumi.set(__self__, "address_family", address_family)
@@ -127,7 +161,7 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="addressFamily")
     def address_family(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        IP Address Family.
+        IP Address Family
         """
         return pulumi.get(self, "address_family")
 
@@ -139,7 +173,8 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="dstCidr")
     def dst_cidr(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        The destination network segment of the traffic message.  The flow classification matches the traffic of the destination IP address in the destination network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination IP address.
+        The destination network segment of the traffic message.
+        The flow classification matches the traffic of the destination IP address in the destination network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination IP address.
         """
         return pulumi.get(self, "dst_cidr")
 
@@ -151,7 +186,11 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="dstPortRanges")
     def dst_port_ranges(self) -> Optional[pulumi.Input[Sequence[pulumi.Input[builtins.int]]]]:
         """
-        The destination port of the traffic message. Valid values: **-1**, `1` to `65535`.  The flow classification rule matches the traffic of the destination port number in the destination port range. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination port number.  The current parameter supports a maximum of 2 port numbers. The input format is described as follows:
+        The destination port of the traffic message. Valid values: **-1**, `1` to `65535`.
+
+        The flow classification rule matches the traffic of the destination port number in the destination port range. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any destination port number.
+
+        The current parameter supports a maximum of 2 port numbers. The input format is described as follows:
         - If you only enter a port number, such as 1, the system defaults to match the traffic with the destination port of 1.
         - If you enter 2 port numbers, such as 1 and 200, the system defaults to match the traffic of the destination port in the range of 1 to 200.
         - If you enter 2 port numbers and one of them is - 1, the other port must also be - 1, indicating that it matches any destination port.
@@ -166,7 +205,11 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="matchDscp")
     def match_dscp(self) -> Optional[pulumi.Input[builtins.int]]:
         """
-        The DSCP value of the traffic message. Valid values: `0` to **63 * *.  The flow classification rule matches the flow with the specified DSCP value. If the flow classification rule is not set, it means that the flow classification rule matches the flow with any DSCP value.> **NOTE:**  The current DSCP value refers to the DSCP value that the traffic message has carried before entering the cross-region connection.
+        The DSCP value of the traffic message. Valid values: `0` to **63 * *.
+
+        The flow classification rule matches the flow with the specified DSCP value. If the flow classification rule is not set, it means that the flow classification rule matches the flow with any DSCP value.
+
+        > **NOTE:**  The current DSCP value refers to the DSCP value that the traffic message has carried before entering the cross-region connection.
         """
         return pulumi.get(self, "match_dscp")
 
@@ -178,7 +221,8 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter
     def protocol(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        The protocol type of the traffic message.  Stream classification rules can match traffic of multiple protocol types, such as `HTTP`, `HTTPS`, `TCP`, `UDP`, `SSH`, and **Telnet. For more protocol types, please log on to the [Cloud Enterprise Network Management Console](https://cen.console.aliyun.com/cen/list) to view.
+        The protocol type of the traffic message.
+        Stream classification rules can match traffic of multiple protocol types, such as `HTTP`, `HTTPS`, `TCP`, `UDP`, `SSH`, and **Telnet. For more protocol types, please log on to the [Cloud Enterprise Network Management Console](https://cen.console.aliyun.com/cen/list) to view.
         """
         return pulumi.get(self, "protocol")
 
@@ -190,7 +234,8 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="srcCidr")
     def src_cidr(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        The source network segment of the traffic message.  The flow classification rule matches the traffic of the source IP address in the source network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any source IP address.
+        The source network segment of the traffic message.
+        The flow classification rule matches the traffic of the source IP address in the source network segment. If the flow classification rule is not set, it means that the flow classification rule matches the traffic of any source IP address.
         """
         return pulumi.get(self, "src_cidr")
 
@@ -202,7 +247,11 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="srcPortRanges")
     def src_port_ranges(self) -> Optional[pulumi.Input[Sequence[pulumi.Input[builtins.int]]]]:
         """
-        The source port of the traffic message. Valid values: **-1**, `1` to `65535`.  The flow classification rule matches the traffic of the source port number in the source port range. If it is not set, it means that the flow classification rule matches the traffic of any source port number.  The current parameter supports entering up to two port numbers. The input format is described as follows:
+        The source port of the traffic message. Valid values: **-1**, `1` to `65535`.
+
+        The flow classification rule matches the traffic of the source port number in the source port range. If it is not set, it means that the flow classification rule matches the traffic of any source port number.
+
+        The current parameter supports entering up to two port numbers. The input format is described as follows:
         - If you only enter a port number, such as 1, the system defaults to match the traffic with source port 1.
         - If you enter two port numbers, such as 1 and 200, the system defaults to match the traffic with the source port in the range of 1 to 200.
         - If you enter two port numbers and one of them is - 1, the other port must also be - 1, indicating that it matches any source port.
@@ -217,7 +266,8 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="trafficMatchRuleDescription")
     def traffic_match_rule_description(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        The description information of the stream classification rule.  The description must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
+        The description information of the stream classification rule.
+        The description must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
         """
         return pulumi.get(self, "traffic_match_rule_description")
 
@@ -229,7 +279,8 @@ class TrafficMarkingPolicyTrafficMatchRuleArgs:
     @pulumi.getter(name="trafficMatchRuleName")
     def traffic_match_rule_name(self) -> Optional[pulumi.Input[builtins.str]]:
         """
-        The name of the stream classification rule.  The name must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
+        The name of the stream classification rule.
+        The name must be 2 to 128 characters in length and can contain numbers, dashes (-), and underscores (_).
         """
         return pulumi.get(self, "traffic_match_rule_name")
 

pulumi_alicloud/cen/bandwidth_limit.py

@@ -27,7 +27,7 @@ class BandwidthLimitArgs:
         The set of arguments for constructing a BandwidthLimit resource.
         :param pulumi.Input[builtins.int] bandwidth_limit: The bandwidth configured for the interconnected regions communication.
                
-               ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+               ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         :param pulumi.Input[builtins.str] instance_id: The ID of the CEN.
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] region_ids: List of the two regions to interconnect. Must be two different regions.
         """
@@ -41,7 +41,7 @@ class BandwidthLimitArgs:
         """
         The bandwidth configured for the interconnected regions communication.
 
-        ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+        ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         """
         return pulumi.get(self, "bandwidth_limit")
 
@@ -84,7 +84,7 @@ class _BandwidthLimitState:
         Input properties used for looking up and filtering BandwidthLimit resources.
         :param pulumi.Input[builtins.int] bandwidth_limit: The bandwidth configured for the interconnected regions communication.
                
-               ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+               ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         :param pulumi.Input[builtins.str] instance_id: The ID of the CEN.
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] region_ids: List of the two regions to interconnect. Must be two different regions.
         """
@@ -101,7 +101,7 @@ class _BandwidthLimitState:
         """
         The bandwidth configured for the interconnected regions communication.
 
-        ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+        ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         """
         return pulumi.get(self, "bandwidth_limit")
 
@@ -134,10 +134,8 @@ class _BandwidthLimitState:
         pulumi.set(self, "region_ids", value)
 
 
+@pulumi.type_token("alicloud:cen/bandwidthLimit:BandwidthLimit")
 class BandwidthLimit(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/bandwidthLimit:BandwidthLimit"
-
     @overload
     def __init__(__self__,
                  resource_name: str,
@@ -218,7 +216,7 @@ class BandwidthLimit(pulumi.CustomResource):
         :param pulumi.ResourceOptions opts: Options for the resource.
         :param pulumi.Input[builtins.int] bandwidth_limit: The bandwidth configured for the interconnected regions communication.
                
-               ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+               ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         :param pulumi.Input[builtins.str] instance_id: The ID of the CEN.
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] region_ids: List of the two regions to interconnect. Must be two different regions.
         """
@@ -354,7 +352,7 @@ class BandwidthLimit(pulumi.CustomResource):
         :param pulumi.ResourceOptions opts: Options for the resource.
         :param pulumi.Input[builtins.int] bandwidth_limit: The bandwidth configured for the interconnected regions communication.
                
-               ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+               ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         :param pulumi.Input[builtins.str] instance_id: The ID of the CEN.
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] region_ids: List of the two regions to interconnect. Must be two different regions.
         """
@@ -373,7 +371,7 @@ class BandwidthLimit(pulumi.CustomResource):
         """
         The bandwidth configured for the interconnected regions communication.
 
-        ->**NOTE:** The "alicloud_cen_bandwidthlimit" resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
+        ->**NOTE:** The `cen.BandwidthLimit` resource depends on the related "cen.BandwidthPackageAttachment" resource and "cen.InstanceAttachment" resource.
         """
         return pulumi.get(self, "bandwidth_limit")
 

pulumi_alicloud/cen/bandwidth_package.py

@@ -428,10 +428,8 @@ class _BandwidthPackageState:
         pulumi.set(self, "status", value)
 
 
+@pulumi.type_token("alicloud:cen/bandwidthPackage:BandwidthPackage")
 class BandwidthPackage(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/bandwidthPackage:BandwidthPackage"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/bandwidth_package_attachment.py

@@ -95,10 +95,8 @@ class _BandwidthPackageAttachmentState:
         pulumi.set(self, "instance_id", value)
 
 
+@pulumi.type_token("alicloud:cen/bandwidthPackageAttachment:BandwidthPackageAttachment")
 class BandwidthPackageAttachment(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/bandwidthPackageAttachment:BandwidthPackageAttachment"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/child_instance_route_entry_to_attachment.py

@@ -221,10 +221,8 @@ class _ChildInstanceRouteEntryToAttachmentState:
         pulumi.set(self, "transit_router_attachment_id", value)
 
 
+@pulumi.type_token("alicloud:cen/childInstanceRouteEntryToAttachment:ChildInstanceRouteEntryToAttachment")
 class ChildInstanceRouteEntryToAttachment(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/childInstanceRouteEntryToAttachment:ChildInstanceRouteEntryToAttachment"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/flow_log.py

@@ -430,10 +430,8 @@ class _FlowLogState:
         pulumi.set(self, "transit_router_id", value)
 
 
+@pulumi.type_token("alicloud:cen/flowLog:FlowLog")
 class FlowLog(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/flowLog:FlowLog"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/instance.py

@@ -273,10 +273,8 @@ class _InstanceState:
         pulumi.set(self, "tags", value)
 
 
+@pulumi.type_token("alicloud:cen/instance:Instance")
 class Instance(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/instance:Instance"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/instance_attachment.py

@@ -245,10 +245,8 @@ class _InstanceAttachmentState:
         pulumi.set(self, "status", value)
 
 
+@pulumi.type_token("alicloud:cen/instanceAttachment:InstanceAttachment")
 class InstanceAttachment(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/instanceAttachment:InstanceAttachment"
-
     @overload
     def __init__(__self__,
                  resource_name: str,

pulumi_alicloud/cen/instance_grant.py

@@ -126,10 +126,8 @@ class _InstanceGrantState:
         pulumi.set(self, "child_instance_id", value)
 
 
+@pulumi.type_token("alicloud:cen/instanceGrant:InstanceGrant")
 class InstanceGrant(pulumi.CustomResource):
-
-    pulumi_type = "alicloud:cen/instanceGrant:InstanceGrant"
-
     @overload
     def __init__(__self__,
                  resource_name: str,