pulumi-alicloud 3.68.0__py3-none-any.whl → 3.68.0a1732277964__py3-none-any.whl

pulumi_alicloud/gwlb/outputs.py

@@ -21,7 +21,6 @@ __all__ = [
     'ServerGroupConnectionDrainConfig',
     'ServerGroupHealthCheckConfig',
     'ServerGroupServer',
-    'GetZonesZoneResult',
 ]
 
 @pulumi.output_type
@@ -52,9 +51,9 @@ class LoadBalancerZoneMapping(dict):
                  zone_id: str,
                  load_balancer_addresses: Optional[Sequence['outputs.LoadBalancerZoneMappingLoadBalancerAddress']] = None):
         """
-        :param str vswitch_id: The ID of the vSwitch in the zone. You can specify only one vSwitch (subnet) in each zone of a GWLB instance.
-        :param str zone_id: The zone ID. You can call the DescribeZones operation to query the most recent zone list.
-        :param Sequence['LoadBalancerZoneMappingLoadBalancerAddressArgs'] load_balancer_addresses: The information about the IP addresses used by the GWLB instance.
+        :param str vswitch_id: The ID of the vSwitch that corresponds to the zone. Each zone can use only one vSwitch and subnet.
+        :param str zone_id: The ID of the zone to which the Gateway Load Balancer instance belongs.
+        :param Sequence['LoadBalancerZoneMappingLoadBalancerAddressArgs'] load_balancer_addresses: The addresses of the Gateway Load Balancer instance.
         """
         pulumi.set(__self__, "vswitch_id", vswitch_id)
         pulumi.set(__self__, "zone_id", zone_id)
@@ -65,7 +64,7 @@ class LoadBalancerZoneMapping(dict):
     @pulumi.getter(name="vswitchId")
     def vswitch_id(self) -> str:
         """
-        The ID of the vSwitch in the zone. You can specify only one vSwitch (subnet) in each zone of a GWLB instance.
+        The ID of the vSwitch that corresponds to the zone. Each zone can use only one vSwitch and subnet.
         """
         return pulumi.get(self, "vswitch_id")
 
@@ -73,7 +72,7 @@ class LoadBalancerZoneMapping(dict):
     @pulumi.getter(name="zoneId")
     def zone_id(self) -> str:
         """
-        The zone ID. You can call the DescribeZones operation to query the most recent zone list.
+        The ID of the zone to which the Gateway Load Balancer instance belongs.
         """
         return pulumi.get(self, "zone_id")
 
@@ -81,7 +80,7 @@ class LoadBalancerZoneMapping(dict):
     @pulumi.getter(name="loadBalancerAddresses")
     def load_balancer_addresses(self) -> Optional[Sequence['outputs.LoadBalancerZoneMappingLoadBalancerAddress']]:
         """
-        The information about the IP addresses used by the GWLB instance.
+        The addresses of the Gateway Load Balancer instance.
         """
         return pulumi.get(self, "load_balancer_addresses")
 
@@ -111,8 +110,8 @@ class LoadBalancerZoneMappingLoadBalancerAddress(dict):
                  eni_id: Optional[str] = None,
                  private_ipv4_address: Optional[str] = None):
         """
-        :param str eni_id: The ID of the elastic network interface (ENI) used by the GWLB instance.
-        :param str private_ipv4_address: The private IPv4 address.
+        :param str eni_id: The ID of the ENI.
+        :param str private_ipv4_address: IPv4 private network address.
         """
         if eni_id is not None:
             pulumi.set(__self__, "eni_id", eni_id)
@@ -123,7 +122,7 @@ class LoadBalancerZoneMappingLoadBalancerAddress(dict):
     @pulumi.getter(name="eniId")
     def eni_id(self) -> Optional[str]:
         """
-        The ID of the elastic network interface (ENI) used by the GWLB instance.
+        The ID of the ENI.
         """
         return pulumi.get(self, "eni_id")
 
@@ -131,7 +130,7 @@ class LoadBalancerZoneMappingLoadBalancerAddress(dict):
     @pulumi.getter(name="privateIpv4Address")
     def private_ipv4_address(self) -> Optional[str]:
         """
-        The private IPv4 address.
+        IPv4 private network address.
         """
         return pulumi.get(self, "private_ipv4_address")
 
@@ -161,14 +160,12 @@ class ServerGroupConnectionDrainConfig(dict):
                  connection_drain_enabled: Optional[bool] = None,
                  connection_drain_timeout: Optional[int] = None):
         """
-        :param bool connection_drain_enabled: Indicates whether connection draining is enabled. Valid values:
-        :param int connection_drain_timeout: The timeout period of connection draining.
+        :param bool connection_drain_enabled: Whether to open the connection graceful interrupt. Value:
+        :param int connection_drain_timeout: Connection Grace interrupt timeout.
                
-               Unit: seconds
+               Unit: seconds.
                
-               Valid values: `1` to `3600`.
-               
-               Default value: `300`.
+               Value range: 1~3600.
         """
         if connection_drain_enabled is not None:
             pulumi.set(__self__, "connection_drain_enabled", connection_drain_enabled)
@@ -179,7 +176,7 @@ class ServerGroupConnectionDrainConfig(dict):
     @pulumi.getter(name="connectionDrainEnabled")
     def connection_drain_enabled(self) -> Optional[bool]:
         """
-        Indicates whether connection draining is enabled. Valid values:
+        Whether to open the connection graceful interrupt. Value:
         """
         return pulumi.get(self, "connection_drain_enabled")
 
@@ -187,13 +184,11 @@ class ServerGroupConnectionDrainConfig(dict):
     @pulumi.getter(name="connectionDrainTimeout")
     def connection_drain_timeout(self) -> Optional[int]:
         """
-        The timeout period of connection draining.
-
-        Unit: seconds
+        Connection Grace interrupt timeout.
 
-        Valid values: `1` to `3600`.
+        Unit: seconds.
 
-        Default value: `300`.
+        Value range: 1~3600.
         """
         return pulumi.get(self, "connection_drain_timeout")
 
@@ -247,49 +242,48 @@ class ServerGroupHealthCheckConfig(dict):
                  healthy_threshold: Optional[int] = None,
                  unhealthy_threshold: Optional[int] = None):
         """
-        :param int health_check_connect_port: The backend server port that is used for health checks.
+        :param int health_check_connect_port: The port of the backend server used for health check.
                
-               Valid values: `1` to `65535`.
+               Value range: **1 to 65535**.
                
                Default value: `80`.
-        :param int health_check_connect_timeout: The maximum timeout period of a health check response.
+        :param int health_check_connect_timeout: The maximum timeout period for health check responses.
                
-               Unit: seconds
+               Unit: seconds.
                
-               Valid values: `1` to `300`.
+               Value range: **1 to 300**.
                
                Default value: `5`.
-        :param str health_check_domain: The domain name that you want to use for health checks. Valid values:
-               
-               *   **$SERVER_IP** (default): the private IP address of a backend server.
-        :param bool health_check_enabled: Specifies whether to enable the health check feature. Valid values:
-        :param Sequence[str] health_check_http_codes: The HTTP status codes that the system returns for health checks.
-        :param int health_check_interval: The interval at which health checks are performed.
+        :param str health_check_domain: The domain name used for health checks. Value:
+               - **$SERVER_IP (default)**: Use the internal IP address of the backend server.
+        :param bool health_check_enabled: Whether to enable health check. Value:
+               - **true (default)**: enabled.
+        :param Sequence[str] health_check_http_codes: Health status return code list.
+        :param int health_check_interval: The time interval of the health check.
                
-               Unit: seconds
+               Unit: seconds.
                
-               Valid values: `1` to `50`.
+               Value range: **1~50**.
                
                Default value: `10`.
-        :param str health_check_path: The URL that is used for health checks.
+        :param str health_check_path: Health check path.
                
-               The URL must be 1 to 80 characters in length, and can contain letters, digits, hyphens (-), forward slashes (/), periods (.), percent signs (%), question marks (?), number signs (#), and ampersands (&). The URL can also contain the following extended characters: \\_ ; ~ ! ( ) \\* \\[ ] @ $ ^ : ' , + =
+               It can be 1 to 80 characters in length and can only use upper and lower case letters, digits, dashes (-), forward slashes (/), half-width periods (.), percent signs (%), and half-width question marks (?), Pound sign (#) and and(&) and extended character set_;~! ()*[]@$^: ',+ =
                
-               The URL must start with a forward slash (/).
+               Must start with a forward slash (/).
                
-               > **NOTE:**  This parameter takes effect only if you set `HealthCheckProtocol` to `HTTP`.
-        :param str health_check_protocol: The protocol that is used for health checks. Valid values:
+               > **NOTE:**  This parameter takes effect only when the HealthCheckProtocol is HTTP.
+        :param str health_check_protocol: Health check protocol, value:
+               - `TCP` (default): Sends a SYN handshake packet to check whether the server port is alive.
+               - `HTTP`: Sends a GET request to simulate the access behavior of the browser to check whether the server application is healthy.
+        :param int healthy_threshold: After the number of consecutive successful health checks, the health check status of the backend server is determined as successful from failed.
                
-               - `TCP`: TCP health checks send TCP SYN packets to a backend server to check whether the port of the backend server is reachable.
-               - `HTTP`: HTTP health checks simulate a process that uses a web browser to access resources by sending HEAD or GET requests to an instance. These requests are used to check whether the instance is healthy.
-        :param int healthy_threshold: The number of times that an unhealthy backend server must consecutively pass health checks before it is declared healthy. In this case, the health status changes from `fail` to `success`.
-               
-               Valid values: `2` to `10`.
+               Value range: **2 to 10**.
                
                Default value: `2`.
-        :param int unhealthy_threshold: The number of times that a healthy backend server must consecutively fail health checks before it is declared unhealthy. In this case, the health status changes from `success` to `fail`.
+        :param int unhealthy_threshold: The number of consecutive failed health checks that determine the health check status of the backend server from success to failure.
                
-               Valid values: `2` to `10`.
+               Value range: **2 to 10**.
                
                Default value: `2`.
         """
@@ -318,9 +312,9 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckConnectPort")
     def health_check_connect_port(self) -> Optional[int]:
         """
-        The backend server port that is used for health checks.
+        The port of the backend server used for health check.
 
-        Valid values: `1` to `65535`.
+        Value range: **1 to 65535**.
 
         Default value: `80`.
         """
@@ -330,11 +324,11 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckConnectTimeout")
     def health_check_connect_timeout(self) -> Optional[int]:
         """
-        The maximum timeout period of a health check response.
+        The maximum timeout period for health check responses.
 
-        Unit: seconds
+        Unit: seconds.
 
-        Valid values: `1` to `300`.
+        Value range: **1 to 300**.
 
         Default value: `5`.
         """
@@ -344,9 +338,8 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckDomain")
     def health_check_domain(self) -> Optional[str]:
         """
-        The domain name that you want to use for health checks. Valid values:
-
-        *   **$SERVER_IP** (default): the private IP address of a backend server.
+        The domain name used for health checks. Value:
+        - **$SERVER_IP (default)**: Use the internal IP address of the backend server.
         """
         return pulumi.get(self, "health_check_domain")
 
@@ -354,7 +347,8 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckEnabled")
     def health_check_enabled(self) -> Optional[bool]:
         """
-        Specifies whether to enable the health check feature. Valid values:
+        Whether to enable health check. Value:
+        - **true (default)**: enabled.
         """
         return pulumi.get(self, "health_check_enabled")
 
@@ -362,7 +356,7 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckHttpCodes")
     def health_check_http_codes(self) -> Optional[Sequence[str]]:
         """
-        The HTTP status codes that the system returns for health checks.
+        Health status return code list.
         """
         return pulumi.get(self, "health_check_http_codes")
 
@@ -370,11 +364,11 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckInterval")
     def health_check_interval(self) -> Optional[int]:
         """
-        The interval at which health checks are performed.
+        The time interval of the health check.
 
-        Unit: seconds
+        Unit: seconds.
 
-        Valid values: `1` to `50`.
+        Value range: **1~50**.
 
         Default value: `10`.
         """
@@ -384,13 +378,13 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckPath")
     def health_check_path(self) -> Optional[str]:
         """
-        The URL that is used for health checks.
+        Health check path.
 
-        The URL must be 1 to 80 characters in length, and can contain letters, digits, hyphens (-), forward slashes (/), periods (.), percent signs (%), question marks (?), number signs (#), and ampersands (&). The URL can also contain the following extended characters: \\_ ; ~ ! ( ) \\* \\[ ] @ $ ^ : ' , + =
+        It can be 1 to 80 characters in length and can only use upper and lower case letters, digits, dashes (-), forward slashes (/), half-width periods (.), percent signs (%), and half-width question marks (?), Pound sign (#) and and(&) and extended character set_;~! ()*[]@$^: ',+ =
 
-        The URL must start with a forward slash (/).
+        Must start with a forward slash (/).
 
-        > **NOTE:**  This parameter takes effect only if you set `HealthCheckProtocol` to `HTTP`.
+        > **NOTE:**  This parameter takes effect only when the HealthCheckProtocol is HTTP.
         """
         return pulumi.get(self, "health_check_path")
 
@@ -398,10 +392,9 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthCheckProtocol")
     def health_check_protocol(self) -> Optional[str]:
         """
-        The protocol that is used for health checks. Valid values:
-
-        - `TCP`: TCP health checks send TCP SYN packets to a backend server to check whether the port of the backend server is reachable.
-        - `HTTP`: HTTP health checks simulate a process that uses a web browser to access resources by sending HEAD or GET requests to an instance. These requests are used to check whether the instance is healthy.
+        Health check protocol, value:
+        - `TCP` (default): Sends a SYN handshake packet to check whether the server port is alive.
+        - `HTTP`: Sends a GET request to simulate the access behavior of the browser to check whether the server application is healthy.
         """
         return pulumi.get(self, "health_check_protocol")
 
@@ -409,9 +402,9 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="healthyThreshold")
     def healthy_threshold(self) -> Optional[int]:
         """
-        The number of times that an unhealthy backend server must consecutively pass health checks before it is declared healthy. In this case, the health status changes from `fail` to `success`.
+        After the number of consecutive successful health checks, the health check status of the backend server is determined as successful from failed.
 
-        Valid values: `2` to `10`.
+        Value range: **2 to 10**.
 
         Default value: `2`.
         """
@@ -421,9 +414,9 @@ class ServerGroupHealthCheckConfig(dict):
     @pulumi.getter(name="unhealthyThreshold")
     def unhealthy_threshold(self) -> Optional[int]:
         """
-        The number of times that a healthy backend server must consecutively fail health checks before it is declared unhealthy. In this case, the health status changes from `success` to `fail`.
+        The number of consecutive failed health checks that determine the health check status of the backend server from success to failure.
 
-        Valid values: `2` to `10`.
+        Value range: **2 to 10**.
 
         Default value: `2`.
         """
@@ -463,20 +456,16 @@ class ServerGroupServer(dict):
                  server_ip: Optional[str] = None,
                  status: Optional[str] = None):
         """
-        :param str server_id: The backend server ID.
-               
-               - If the server group is of the `Instance` type, set this parameter to the IDs of servers of the `Ecs`, `Eni`, or `Eci` type.
-               - If the server group is of the `Ip` type, set ServerId to IP addresses.
-        :param str server_type: The type of the backend server. Valid values:
-               
-               - `Ecs`: Elastic Compute Service (ECS) instance
-               - `Eni`: elastic network interface (ENI)
-               - `Eci`: elastic container instance
-               - `Ip`: IP address
-        :param int port: (Optional, Computed, Int) The port that is used by the backend server.
+        :param str server_id: The ID of the backend server.
+        :param str server_type: Backend server type. Valid values:
+               - `Ecs`: ECS instance.
+               - `Eni`: ENI instance.
+               - `Eci`: ECI elastic container.
+               - `Ip`: Ip address.
+        :param int port: The port used by the backend server.
         :param str server_group_id: The server group ID.
-        :param str server_ip: The IP address of the backend server.
-        :param str status: Indicates the status of the backend server.
+        :param str server_ip: Server ip.
+        :param str status: Server group status. Value:
         """
         pulumi.set(__self__, "server_id", server_id)
         pulumi.set(__self__, "server_type", server_type)
@@ -493,10 +482,7 @@ class ServerGroupServer(dict):
     @pulumi.getter(name="serverId")
     def server_id(self) -> str:
         """
-        The backend server ID.
-
-        - If the server group is of the `Instance` type, set this parameter to the IDs of servers of the `Ecs`, `Eni`, or `Eci` type.
-        - If the server group is of the `Ip` type, set ServerId to IP addresses.
+        The ID of the backend server.
         """
         return pulumi.get(self, "server_id")
 
@@ -504,12 +490,11 @@ class ServerGroupServer(dict):
     @pulumi.getter(name="serverType")
     def server_type(self) -> str:
         """
-        The type of the backend server. Valid values:
-
-        - `Ecs`: Elastic Compute Service (ECS) instance
-        - `Eni`: elastic network interface (ENI)
-        - `Eci`: elastic container instance
-        - `Ip`: IP address
+        Backend server type. Valid values:
+        - `Ecs`: ECS instance.
+        - `Eni`: ENI instance.
+        - `Eci`: ECI elastic container.
+        - `Ip`: Ip address.
         """
         return pulumi.get(self, "server_type")
 
@@ -517,7 +502,7 @@ class ServerGroupServer(dict):
     @pulumi.getter
     def port(self) -> Optional[int]:
         """
-        (Optional, Computed, Int) The port that is used by the backend server.
+        The port used by the backend server.
         """
         return pulumi.get(self, "port")
 
@@ -533,7 +518,7 @@ class ServerGroupServer(dict):
     @pulumi.getter(name="serverIp")
     def server_ip(self) -> Optional[str]:
         """
-        The IP address of the backend server.
+        Server ip.
         """
         return pulumi.get(self, "server_ip")
 
@@ -541,48 +526,8 @@ class ServerGroupServer(dict):
     @pulumi.getter
     def status(self) -> Optional[str]:
         """
-        Indicates the status of the backend server.
+        Server group status. Value:
         """
         return pulumi.get(self, "status")
 
 
-@pulumi.output_type
-class GetZonesZoneResult(dict):
-    def __init__(__self__, *,
-                 id: str,
-                 local_name: str,
-                 zone_id: str):
-        """
-        :param str id: The zone ID.
-        :param str local_name: The zone name.
-        :param str zone_id: The zone ID.
-        """
-        pulumi.set(__self__, "id", id)
-        pulumi.set(__self__, "local_name", local_name)
-        pulumi.set(__self__, "zone_id", zone_id)
-
-    @property
-    @pulumi.getter
-    def id(self) -> str:
-        """
-        The zone ID.
-        """
-        return pulumi.get(self, "id")
-
-    @property
-    @pulumi.getter(name="localName")
-    def local_name(self) -> str:
-        """
-        The zone name.
-        """
-        return pulumi.get(self, "local_name")
-
-    @property
-    @pulumi.getter(name="zoneId")
-    def zone_id(self) -> str:
-        """
-        The zone ID.
-        """
-        return pulumi.get(self, "zone_id")
-
-