pulumi-aiven 6.41.0a1752815525__py3-none-any.whl → 6.41.0a1753242343__py3-none-any.whl

pulumi_aiven/_inputs.py

@@ -370,6 +370,8 @@ __all__ = [
     'MySqlMysqlUserConfigMigrationArgsDict',
     'MySqlMysqlUserConfigMysqlArgs',
     'MySqlMysqlUserConfigMysqlArgsDict',
+    'MySqlMysqlUserConfigMysqlIncrementalBackupArgs',
+    'MySqlMysqlUserConfigMysqlIncrementalBackupArgsDict',
     'MySqlMysqlUserConfigPrivateAccessArgs',
     'MySqlMysqlUserConfigPrivateAccessArgsDict',
     'MySqlMysqlUserConfigPrivatelinkAccessArgs',
@@ -542,6 +544,10 @@ __all__ = [
     'RedisTagArgsDict',
     'RedisTechEmailArgs',
     'RedisTechEmailArgsDict',
+    'ServiceIntegrationClickhouseCredentialsUserConfigArgs',
+    'ServiceIntegrationClickhouseCredentialsUserConfigArgsDict',
+    'ServiceIntegrationClickhouseCredentialsUserConfigGrantArgs',
+    'ServiceIntegrationClickhouseCredentialsUserConfigGrantArgsDict',
     'ServiceIntegrationClickhouseKafkaUserConfigArgs',
     'ServiceIntegrationClickhouseKafkaUserConfigArgsDict',
     'ServiceIntegrationClickhouseKafkaUserConfigTableArgs',
@@ -2073,6 +2079,10 @@ if not MYPY:
         """
         Max standby streaming delay in milliseconds. The default is `30000` (upstream default).
         """
+        max_sync_workers_per_subscription: NotRequired[pulumi.Input[builtins.int]]
+        """
+        Maximum number of synchronization workers per subscription. The default is `2`.
+        """
         max_wal_senders: NotRequired[pulumi.Input[builtins.int]]
         """
         PostgreSQL maximum WAL senders. The default is `20`. Changing this parameter causes a service restart.
@@ -2169,6 +2179,7 @@ class AlloydbomniAlloydbomniUserConfigPgArgs:
                  max_stack_depth: Optional[pulumi.Input[builtins.int]] = None,
                  max_standby_archive_delay: Optional[pulumi.Input[builtins.int]] = None,
                  max_standby_streaming_delay: Optional[pulumi.Input[builtins.int]] = None,
+                 max_sync_workers_per_subscription: Optional[pulumi.Input[builtins.int]] = None,
                  max_wal_senders: Optional[pulumi.Input[builtins.int]] = None,
                  max_worker_processes: Optional[pulumi.Input[builtins.int]] = None,
                  password_encryption: Optional[pulumi.Input[builtins.str]] = None,
@@ -2218,6 +2229,7 @@ class AlloydbomniAlloydbomniUserConfigPgArgs:
         :param pulumi.Input[builtins.int] max_stack_depth: Maximum depth of the stack in bytes. The default is `2097152` (upstream default).
         :param pulumi.Input[builtins.int] max_standby_archive_delay: Max standby archive delay in milliseconds. The default is `30000` (upstream default).
         :param pulumi.Input[builtins.int] max_standby_streaming_delay: Max standby streaming delay in milliseconds. The default is `30000` (upstream default).
+        :param pulumi.Input[builtins.int] max_sync_workers_per_subscription: Maximum number of synchronization workers per subscription. The default is `2`.
         :param pulumi.Input[builtins.int] max_wal_senders: PostgreSQL maximum WAL senders. The default is `20`. Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.int] max_worker_processes: Sets the maximum number of background processes that the system can support. The default is `8`. Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.str] password_encryption: Enum: `md5`, `scram-sha-256`. Chooses the algorithm for encrypting passwords. Default: `md5`.
@@ -2301,6 +2313,8 @@ class AlloydbomniAlloydbomniUserConfigPgArgs:
             pulumi.set(__self__, "max_standby_archive_delay", max_standby_archive_delay)
         if max_standby_streaming_delay is not None:
             pulumi.set(__self__, "max_standby_streaming_delay", max_standby_streaming_delay)
+        if max_sync_workers_per_subscription is not None:
+            pulumi.set(__self__, "max_sync_workers_per_subscription", max_sync_workers_per_subscription)
         if max_wal_senders is not None:
             pulumi.set(__self__, "max_wal_senders", max_wal_senders)
         if max_worker_processes is not None:
@@ -2738,6 +2752,18 @@ class AlloydbomniAlloydbomniUserConfigPgArgs:
     def max_standby_streaming_delay(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "max_standby_streaming_delay", value)
 
+    @property
+    @pulumi.getter(name="maxSyncWorkersPerSubscription")
+    def max_sync_workers_per_subscription(self) -> Optional[pulumi.Input[builtins.int]]:
+        """
+        Maximum number of synchronization workers per subscription. The default is `2`.
+        """
+        return pulumi.get(self, "max_sync_workers_per_subscription")
+
+    @max_sync_workers_per_subscription.setter
+    def max_sync_workers_per_subscription(self, value: Optional[pulumi.Input[builtins.int]]):
+        pulumi.set(self, "max_sync_workers_per_subscription", value)
+
     @property
     @pulumi.getter(name="maxWalSenders")
     def max_wal_senders(self) -> Optional[pulumi.Input[builtins.int]]:
@@ -2915,7 +2941,7 @@ if not MYPY:
         """
         log_catalog: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies that session logging should be enabled in the casewhere all relations in a statement are in pg_catalog. Default: `true`.
+        Specifies that session logging should be enabled in the case where all relationsin a statement are in pg_catalog. Default: `true`.
         """
         log_client: NotRequired[pulumi.Input[builtins.bool]]
         """
@@ -2927,11 +2953,11 @@ if not MYPY:
         """
         log_max_string_length: NotRequired[pulumi.Input[builtins.int]]
         """
-        Crop parameters representation and whole statements if they exceed this threshold. A (default) value of -1 disable the truncation. Default: `-1`.
+        Crop parameters representation and whole statements if they exceed this threshold.A (default) value of -1 disable the truncation. Default: `-1`.
         """
         log_nested_statements: NotRequired[pulumi.Input[builtins.bool]]
         """
-        This GUC allows to turn off logging nested statements, that is, statements that are executed as part of another ExecutorRun. Default: `true`.
+        This GUC allows to turn off logging nested statements, that is, statements that areexecuted as part of another ExecutorRun. Default: `true`.
         """
         log_parameter: NotRequired[pulumi.Input[builtins.bool]]
         """
@@ -2939,15 +2965,15 @@ if not MYPY:
         """
         log_parameter_max_size: NotRequired[pulumi.Input[builtins.int]]
         """
-        Specifies that parameter values longer than this setting (in bytes) should not be logged, but replaced with \\n\\n. Default: `0`.
+        Specifies that parameter values longer than this setting (in bytes) should not be logged,but replaced with \\n\\n. Default: `0`.
         """
         log_relation: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies whether session audit logging should create a separate log entry for each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
+        Specifies whether session audit logging should create a separate log entryfor each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
         """
         log_rows: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies that audit logging should include the rows retrieved or affected by a statement. When enabled the rows field will be included after the parameter field. Default: `false`.
+        Log Rows. Default: `false`.
         """
         log_statement: NotRequired[pulumi.Input[builtins.bool]]
         """
@@ -2955,7 +2981,7 @@ if not MYPY:
         """
         log_statement_once: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies whether logging will include the statement text and parameters with the first log entry for a statement/substatement combination or with every entry. Default: `false`.
+        Specifies whether logging will include the statement text and parameters withthe first log entry for a statement/substatement combination or with every entry. Default: `false`.
         """
         logs: NotRequired[pulumi.Input[Sequence[pulumi.Input[builtins.str]]]]
         """
@@ -2987,17 +3013,17 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
                  role: Optional[pulumi.Input[builtins.str]] = None):
         """
         :param pulumi.Input[builtins.bool] feature_enabled: Enable pgaudit extension. When enabled, pgaudit extension will be automatically installed.Otherwise, extension will be uninstalled but auditing configurations will be preserved. Default: `false`.
-        :param pulumi.Input[builtins.bool] log_catalog: Specifies that session logging should be enabled in the casewhere all relations in a statement are in pg_catalog. Default: `true`.
+        :param pulumi.Input[builtins.bool] log_catalog: Specifies that session logging should be enabled in the case where all relationsin a statement are in pg_catalog. Default: `true`.
         :param pulumi.Input[builtins.bool] log_client: Specifies whether log messages will be visible to a client process such as psql. Default: `false`.
         :param pulumi.Input[builtins.str] log_level: Enum: `debug1`, `debug2`, `debug3`, `debug4`, `debug5`, `info`, `log`, `notice`, `warning`. Specifies the log level that will be used for log entries. Default: `log`.
-        :param pulumi.Input[builtins.int] log_max_string_length: Crop parameters representation and whole statements if they exceed this threshold. A (default) value of -1 disable the truncation. Default: `-1`.
-        :param pulumi.Input[builtins.bool] log_nested_statements: This GUC allows to turn off logging nested statements, that is, statements that are executed as part of another ExecutorRun. Default: `true`.
+        :param pulumi.Input[builtins.int] log_max_string_length: Crop parameters representation and whole statements if they exceed this threshold.A (default) value of -1 disable the truncation. Default: `-1`.
+        :param pulumi.Input[builtins.bool] log_nested_statements: This GUC allows to turn off logging nested statements, that is, statements that areexecuted as part of another ExecutorRun. Default: `true`.
         :param pulumi.Input[builtins.bool] log_parameter: Specifies that audit logging should include the parameters that were passed with the statement. Default: `false`.
-        :param pulumi.Input[builtins.int] log_parameter_max_size: Specifies that parameter values longer than this setting (in bytes) should not be logged, but replaced with \\n\\n. Default: `0`.
-        :param pulumi.Input[builtins.bool] log_relation: Specifies whether session audit logging should create a separate log entry for each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
-        :param pulumi.Input[builtins.bool] log_rows: Specifies that audit logging should include the rows retrieved or affected by a statement. When enabled the rows field will be included after the parameter field. Default: `false`.
+        :param pulumi.Input[builtins.int] log_parameter_max_size: Specifies that parameter values longer than this setting (in bytes) should not be logged,but replaced with \\n\\n. Default: `0`.
+        :param pulumi.Input[builtins.bool] log_relation: Specifies whether session audit logging should create a separate log entryfor each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
+        :param pulumi.Input[builtins.bool] log_rows: Log Rows. Default: `false`.
         :param pulumi.Input[builtins.bool] log_statement: Specifies whether logging will include the statement text and parameters (if enabled). Default: `true`.
-        :param pulumi.Input[builtins.bool] log_statement_once: Specifies whether logging will include the statement text and parameters with the first log entry for a statement/substatement combination or with every entry. Default: `false`.
+        :param pulumi.Input[builtins.bool] log_statement_once: Specifies whether logging will include the statement text and parameters withthe first log entry for a statement/substatement combination or with every entry. Default: `false`.
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] logs: Specifies which classes of statements will be logged by session audit logging.
         :param pulumi.Input[builtins.str] role: Specifies the master role to use for object audit logging.
         """
@@ -3046,7 +3072,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logCatalog")
     def log_catalog(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies that session logging should be enabled in the casewhere all relations in a statement are in pg_catalog. Default: `true`.
+        Specifies that session logging should be enabled in the case where all relationsin a statement are in pg_catalog. Default: `true`.
         """
         return pulumi.get(self, "log_catalog")
 
@@ -3082,7 +3108,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logMaxStringLength")
     def log_max_string_length(self) -> Optional[pulumi.Input[builtins.int]]:
         """
-        Crop parameters representation and whole statements if they exceed this threshold. A (default) value of -1 disable the truncation. Default: `-1`.
+        Crop parameters representation and whole statements if they exceed this threshold.A (default) value of -1 disable the truncation. Default: `-1`.
         """
         return pulumi.get(self, "log_max_string_length")
 
@@ -3094,7 +3120,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logNestedStatements")
     def log_nested_statements(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        This GUC allows to turn off logging nested statements, that is, statements that are executed as part of another ExecutorRun. Default: `true`.
+        This GUC allows to turn off logging nested statements, that is, statements that areexecuted as part of another ExecutorRun. Default: `true`.
         """
         return pulumi.get(self, "log_nested_statements")
 
@@ -3118,7 +3144,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logParameterMaxSize")
     def log_parameter_max_size(self) -> Optional[pulumi.Input[builtins.int]]:
         """
-        Specifies that parameter values longer than this setting (in bytes) should not be logged, but replaced with \\n\\n. Default: `0`.
+        Specifies that parameter values longer than this setting (in bytes) should not be logged,but replaced with \\n\\n. Default: `0`.
         """
         return pulumi.get(self, "log_parameter_max_size")
 
@@ -3130,7 +3156,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logRelation")
     def log_relation(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies whether session audit logging should create a separate log entry for each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
+        Specifies whether session audit logging should create a separate log entryfor each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
         """
         return pulumi.get(self, "log_relation")
 
@@ -3142,7 +3168,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logRows")
     def log_rows(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies that audit logging should include the rows retrieved or affected by a statement. When enabled the rows field will be included after the parameter field. Default: `false`.
+        Log Rows. Default: `false`.
         """
         return pulumi.get(self, "log_rows")
 
@@ -3166,7 +3192,7 @@ class AlloydbomniAlloydbomniUserConfigPgauditArgs:
     @pulumi.getter(name="logStatementOnce")
     def log_statement_once(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies whether logging will include the statement text and parameters with the first log entry for a statement/substatement combination or with every entry. Default: `false`.
+        Specifies whether logging will include the statement text and parameters withthe first log entry for a statement/substatement combination or with every entry. Default: `false`.
         """
         return pulumi.get(self, "log_statement_once")
 
@@ -17606,6 +17632,10 @@ class KafkaKafkaUserConfigSchemaRegistryConfigArgs:
 
 if not MYPY:
     class KafkaKafkaUserConfigSingleZoneArgsDict(TypedDict):
+        availability_zone: NotRequired[pulumi.Input[builtins.str]]
+        """
+        The availability zone to use for the service. This is only used when enabled is set to true. If not set the service will be allocated in random AZ.The AZ is not guaranteed, and the service may be allocated in a different AZ if the selected AZ is not available. Zones will not be validated and invalid zones will be ignored, falling back to random AZ selection. Common availability zones include: AWS (euc1-az1, euc1-az2, euc1-az3), GCP (europe-west1-a, europe-west1-b, europe-west1-c), Azure (germanywestcentral/1, germanywestcentral/2, germanywestcentral/3). Example: `euc1-az1`.
+        """
         enabled: NotRequired[pulumi.Input[builtins.bool]]
         """
         Whether to allocate nodes on the same Availability Zone or spread across zones available. By default service nodes are spread across different AZs. The single AZ support is best-effort and may temporarily allocate nodes in different AZs e.g. in case of capacity limitations in one AZ.
@@ -17616,13 +17646,29 @@ elif False:
 @pulumi.input_type
 class KafkaKafkaUserConfigSingleZoneArgs:
     def __init__(__self__, *,
+                 availability_zone: Optional[pulumi.Input[builtins.str]] = None,
                  enabled: Optional[pulumi.Input[builtins.bool]] = None):
         """
+        :param pulumi.Input[builtins.str] availability_zone: The availability zone to use for the service. This is only used when enabled is set to true. If not set the service will be allocated in random AZ.The AZ is not guaranteed, and the service may be allocated in a different AZ if the selected AZ is not available. Zones will not be validated and invalid zones will be ignored, falling back to random AZ selection. Common availability zones include: AWS (euc1-az1, euc1-az2, euc1-az3), GCP (europe-west1-a, europe-west1-b, europe-west1-c), Azure (germanywestcentral/1, germanywestcentral/2, germanywestcentral/3). Example: `euc1-az1`.
         :param pulumi.Input[builtins.bool] enabled: Whether to allocate nodes on the same Availability Zone or spread across zones available. By default service nodes are spread across different AZs. The single AZ support is best-effort and may temporarily allocate nodes in different AZs e.g. in case of capacity limitations in one AZ.
         """
+        if availability_zone is not None:
+            pulumi.set(__self__, "availability_zone", availability_zone)
         if enabled is not None:
             pulumi.set(__self__, "enabled", enabled)
 
+    @property
+    @pulumi.getter(name="availabilityZone")
+    def availability_zone(self) -> Optional[pulumi.Input[builtins.str]]:
+        """
+        The availability zone to use for the service. This is only used when enabled is set to true. If not set the service will be allocated in random AZ.The AZ is not guaranteed, and the service may be allocated in a different AZ if the selected AZ is not available. Zones will not be validated and invalid zones will be ignored, falling back to random AZ selection. Common availability zones include: AWS (euc1-az1, euc1-az2, euc1-az3), GCP (europe-west1-a, europe-west1-b, europe-west1-c), Azure (germanywestcentral/1, germanywestcentral/2, germanywestcentral/3). Example: `euc1-az1`.
+        """
+        return pulumi.get(self, "availability_zone")
+
+    @availability_zone.setter
+    def availability_zone(self, value: Optional[pulumi.Input[builtins.str]]):
+        pulumi.set(self, "availability_zone", value)
+
     @property
     @pulumi.getter
     def enabled(self) -> Optional[pulumi.Input[builtins.bool]]:
@@ -18717,7 +18763,7 @@ if not MYPY:
         """
         inkless_enable: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Indicates whether inkless should be enabled. This is only available for BYOC services with Inkless feature enabled.
+        Creates a [diskless topic](https://aiven.io/docs/products/diskless). You can only do this when you create the topic and you cannot change it later. Diskless topics are only available for bring your own cloud (BYOC) services that have the feature enabled.
         """
         local_retention_bytes: NotRequired[pulumi.Input[builtins.str]]
         """
@@ -18841,7 +18887,7 @@ class KafkaTopicConfigArgs:
         :param pulumi.Input[builtins.str] flush_messages: This setting allows specifying an interval at which we will force an fsync of data written to the log. For example if this was set to 1 we would fsync after every message; if it were 5 we would fsync after every five messages. In general we recommend you not set this and use replication for durability and allow the operating system's background flush capabilities as it is more efficient.
         :param pulumi.Input[builtins.str] flush_ms: This setting allows specifying a time interval at which we will force an fsync of data written to the log. For example if this was set to 1000 we would fsync after 1000 ms had passed. In general we recommend you not set this and use replication for durability and allow the operating system's background flush capabilities as it is more efficient.
         :param pulumi.Input[builtins.str] index_interval_bytes: This setting controls how frequently Kafka adds an index entry to its offset index. The default setting ensures that we index a message roughly every 4096 bytes. More indexing allows reads to jump closer to the exact position in the log but makes the index larger. You probably don't need to change this.
-        :param pulumi.Input[builtins.bool] inkless_enable: Indicates whether inkless should be enabled. This is only available for BYOC services with Inkless feature enabled.
+        :param pulumi.Input[builtins.bool] inkless_enable: Creates a [diskless topic](https://aiven.io/docs/products/diskless). You can only do this when you create the topic and you cannot change it later. Diskless topics are only available for bring your own cloud (BYOC) services that have the feature enabled.
         :param pulumi.Input[builtins.str] local_retention_bytes: This configuration controls the maximum bytes tiered storage will retain segment files locally before it will discard old log segments to free up space. If set to -2, the limit is equal to overall retention time. If set to -1, no limit is applied but it's possible only if overall retention is also -1.
         :param pulumi.Input[builtins.str] local_retention_ms: This configuration controls the maximum time tiered storage will retain segment files locally before it will discard old log segments to free up space. If set to -2, the time limit is equal to overall retention time. If set to -1, no time limit is applied but it's possible only if overall retention is also -1.
         :param pulumi.Input[builtins.str] max_compaction_lag_ms: The maximum time a message will remain ineligible for compaction in the log. Only applicable for logs that are being compacted.
@@ -19008,7 +19054,7 @@ class KafkaTopicConfigArgs:
     @pulumi.getter(name="inklessEnable")
     def inkless_enable(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Indicates whether inkless should be enabled. This is only available for BYOC services with Inkless feature enabled.
+        Creates a [diskless topic](https://aiven.io/docs/products/diskless). You can only do this when you create the topic and you cannot change it later. Diskless topics are only available for bring your own cloud (BYOC) services that have the feature enabled.
         """
         return pulumi.get(self, "inkless_enable")
 
@@ -22135,6 +22181,10 @@ if not MYPY:
         """
         mysql.conf configuration values
         """
+        mysql_incremental_backup: NotRequired[pulumi.Input['MySqlMysqlUserConfigMysqlIncrementalBackupArgsDict']]
+        """
+        MySQL incremental backup configuration
+        """
         mysql_version: NotRequired[pulumi.Input[builtins.str]]
         """
         Enum: `8`, and newer. MySQL major version.
@@ -22188,6 +22238,7 @@ class MySqlMysqlUserConfigArgs:
                  ip_filters: Optional[pulumi.Input[Sequence[pulumi.Input[builtins.str]]]] = None,
                  migration: Optional[pulumi.Input['MySqlMysqlUserConfigMigrationArgs']] = None,
                  mysql: Optional[pulumi.Input['MySqlMysqlUserConfigMysqlArgs']] = None,
+                 mysql_incremental_backup: Optional[pulumi.Input['MySqlMysqlUserConfigMysqlIncrementalBackupArgs']] = None,
                  mysql_version: Optional[pulumi.Input[builtins.str]] = None,
                  private_access: Optional[pulumi.Input['MySqlMysqlUserConfigPrivateAccessArgs']] = None,
                  privatelink_access: Optional[pulumi.Input['MySqlMysqlUserConfigPrivatelinkAccessArgs']] = None,
@@ -22209,6 +22260,7 @@ class MySqlMysqlUserConfigArgs:
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] ip_filters: Allow incoming connections from CIDR address block, e.g. `10.20.0.0/16`.
         :param pulumi.Input['MySqlMysqlUserConfigMigrationArgs'] migration: Migrate data from existing server
         :param pulumi.Input['MySqlMysqlUserConfigMysqlArgs'] mysql: mysql.conf configuration values
+        :param pulumi.Input['MySqlMysqlUserConfigMysqlIncrementalBackupArgs'] mysql_incremental_backup: MySQL incremental backup configuration
         :param pulumi.Input[builtins.str] mysql_version: Enum: `8`, and newer. MySQL major version.
         :param pulumi.Input['MySqlMysqlUserConfigPrivateAccessArgs'] private_access: Allow access to selected service ports from private networks
         :param pulumi.Input['MySqlMysqlUserConfigPrivatelinkAccessArgs'] privatelink_access: Allow access to selected service components through Privatelink
@@ -22244,6 +22296,8 @@ class MySqlMysqlUserConfigArgs:
             pulumi.set(__self__, "migration", migration)
         if mysql is not None:
             pulumi.set(__self__, "mysql", mysql)
+        if mysql_incremental_backup is not None:
+            pulumi.set(__self__, "mysql_incremental_backup", mysql_incremental_backup)
         if mysql_version is not None:
             pulumi.set(__self__, "mysql_version", mysql_version)
         if private_access is not None:
@@ -22396,6 +22450,18 @@ class MySqlMysqlUserConfigArgs:
     def mysql(self, value: Optional[pulumi.Input['MySqlMysqlUserConfigMysqlArgs']]):
         pulumi.set(self, "mysql", value)
 
+    @property
+    @pulumi.getter(name="mysqlIncrementalBackup")
+    def mysql_incremental_backup(self) -> Optional[pulumi.Input['MySqlMysqlUserConfigMysqlIncrementalBackupArgs']]:
+        """
+        MySQL incremental backup configuration
+        """
+        return pulumi.get(self, "mysql_incremental_backup")
+
+    @mysql_incremental_backup.setter
+    def mysql_incremental_backup(self, value: Optional[pulumi.Input['MySqlMysqlUserConfigMysqlIncrementalBackupArgs']]):
+        pulumi.set(self, "mysql_incremental_backup", value)
+
     @property
     @pulumi.getter(name="mysqlVersion")
     def mysql_version(self) -> Optional[pulumi.Input[builtins.str]]:
@@ -23378,6 +23444,57 @@ class MySqlMysqlUserConfigMysqlArgs:
         pulumi.set(self, "wait_timeout", value)
 
 
+if not MYPY:
+    class MySqlMysqlUserConfigMysqlIncrementalBackupArgsDict(TypedDict):
+        enabled: pulumi.Input[builtins.bool]
+        """
+        Enable periodic incremental backups. When enabled, full*backup*week_schedule must be set. Incremental backups only store changes since the last backup, making them faster and more storage-efficient than full backups. This is particularly useful for large databases where daily full backups would be too time-consuming or expensive.
+        """
+        full_backup_week_schedule: NotRequired[pulumi.Input[builtins.str]]
+        """
+        Comma-separated list of days of the week when full backups should be created. Valid values: mon, tue, wed, thu, fri, sat, sun. Example: `sun,wed`.
+        """
+elif False:
+    MySqlMysqlUserConfigMysqlIncrementalBackupArgsDict: TypeAlias = Mapping[str, Any]
+
+@pulumi.input_type
+class MySqlMysqlUserConfigMysqlIncrementalBackupArgs:
+    def __init__(__self__, *,
+                 enabled: pulumi.Input[builtins.bool],
+                 full_backup_week_schedule: Optional[pulumi.Input[builtins.str]] = None):
+        """
+        :param pulumi.Input[builtins.bool] enabled: Enable periodic incremental backups. When enabled, full*backup*week_schedule must be set. Incremental backups only store changes since the last backup, making them faster and more storage-efficient than full backups. This is particularly useful for large databases where daily full backups would be too time-consuming or expensive.
+        :param pulumi.Input[builtins.str] full_backup_week_schedule: Comma-separated list of days of the week when full backups should be created. Valid values: mon, tue, wed, thu, fri, sat, sun. Example: `sun,wed`.
+        """
+        pulumi.set(__self__, "enabled", enabled)
+        if full_backup_week_schedule is not None:
+            pulumi.set(__self__, "full_backup_week_schedule", full_backup_week_schedule)
+
+    @property
+    @pulumi.getter
+    def enabled(self) -> pulumi.Input[builtins.bool]:
+        """
+        Enable periodic incremental backups. When enabled, full*backup*week_schedule must be set. Incremental backups only store changes since the last backup, making them faster and more storage-efficient than full backups. This is particularly useful for large databases where daily full backups would be too time-consuming or expensive.
+        """
+        return pulumi.get(self, "enabled")
+
+    @enabled.setter
+    def enabled(self, value: pulumi.Input[builtins.bool]):
+        pulumi.set(self, "enabled", value)
+
+    @property
+    @pulumi.getter(name="fullBackupWeekSchedule")
+    def full_backup_week_schedule(self) -> Optional[pulumi.Input[builtins.str]]:
+        """
+        Comma-separated list of days of the week when full backups should be created. Valid values: mon, tue, wed, thu, fri, sat, sun. Example: `sun,wed`.
+        """
+        return pulumi.get(self, "full_backup_week_schedule")
+
+    @full_backup_week_schedule.setter
+    def full_backup_week_schedule(self, value: Optional[pulumi.Input[builtins.str]]):
+        pulumi.set(self, "full_backup_week_schedule", value)
+
+
 if not MYPY:
     class MySqlMysqlUserConfigPrivateAccessArgsDict(TypedDict):
         mysql: NotRequired[pulumi.Input[builtins.bool]]
@@ -28511,12 +28628,7 @@ if not MYPY:
         """
         enforced: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Run shard indexing backpressure in shadow mode or enforced mode.
-                In shadow mode (value set as false), shard indexing backpressure tracks all granular-level metrics,
-                but it doesn’t actually reject any indexing requests.
-                In enforced mode (value set as true),
-                shard indexing backpressure rejects any requests to the cluster that might cause a dip in its performance.
-                Default is false.
+        Run shard indexing backpressure in shadow mode or enforced mode.            In shadow mode (value set as false), shard indexing backpressure tracks all granular-level metrics,            but it doesn’t actually reject any indexing requests.            In enforced mode (value set as true),            shard indexing backpressure rejects any requests to the cluster that might cause a dip in its performance.            Default is false.
         """
         operating_factor: NotRequired[pulumi.Input['OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFactorArgsDict']]
         """
@@ -28538,12 +28650,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureArgs:
                  primary_parameter: Optional[pulumi.Input['OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParameterArgs']] = None):
         """
         :param pulumi.Input[builtins.bool] enabled: Enable or disable shard indexing backpressure. Default is false.
-        :param pulumi.Input[builtins.bool] enforced: Run shard indexing backpressure in shadow mode or enforced mode.
-                       In shadow mode (value set as false), shard indexing backpressure tracks all granular-level metrics,
-                       but it doesn’t actually reject any indexing requests.
-                       In enforced mode (value set as true),
-                       shard indexing backpressure rejects any requests to the cluster that might cause a dip in its performance.
-                       Default is false.
+        :param pulumi.Input[builtins.bool] enforced: Run shard indexing backpressure in shadow mode or enforced mode.            In shadow mode (value set as false), shard indexing backpressure tracks all granular-level metrics,            but it doesn’t actually reject any indexing requests.            In enforced mode (value set as true),            shard indexing backpressure rejects any requests to the cluster that might cause a dip in its performance.            Default is false.
         :param pulumi.Input['OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFactorArgs'] operating_factor: Operating factor
         :param pulumi.Input['OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParameterArgs'] primary_parameter: Primary parameter
         """
@@ -28572,12 +28679,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureArgs:
     @pulumi.getter
     def enforced(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Run shard indexing backpressure in shadow mode or enforced mode.
-                In shadow mode (value set as false), shard indexing backpressure tracks all granular-level metrics,
-                but it doesn’t actually reject any indexing requests.
-                In enforced mode (value set as true),
-                shard indexing backpressure rejects any requests to the cluster that might cause a dip in its performance.
-                Default is false.
+        Run shard indexing backpressure in shadow mode or enforced mode.            In shadow mode (value set as false), shard indexing backpressure tracks all granular-level metrics,            but it doesn’t actually reject any indexing requests.            In enforced mode (value set as true),            shard indexing backpressure rejects any requests to the cluster that might cause a dip in its performance.            Default is false.
         """
         return pulumi.get(self, "enforced")
 
@@ -28614,24 +28716,15 @@ if not MYPY:
     class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFactorArgsDict(TypedDict):
         lower: NotRequired[pulumi.Input[builtins.float]]
         """
-        Specify the lower occupancy limit of the allocated quota of memory for the shard.
-                        If the total memory usage of a shard is below this limit,
-                        shard indexing backpressure decreases the current allocated memory for that shard.
-                        Default is 0.75.
+        Specify the lower occupancy limit of the allocated quota of memory for the shard.                    If the total memory usage of a shard is below this limit,                    shard indexing backpressure decreases the current allocated memory for that shard.                    Default is 0.75.
         """
         optimal: NotRequired[pulumi.Input[builtins.float]]
         """
-        Specify the optimal occupancy of the allocated quota of memory for the shard.
-                        If the total memory usage of a shard is at this level,
-                        shard indexing backpressure doesn’t change the current allocated memory for that shard.
-                        Default is 0.85.
+        Specify the optimal occupancy of the allocated quota of memory for the shard.                    If the total memory usage of a shard is at this level,                    shard indexing backpressure doesn’t change the current allocated memory for that shard.                    Default is 0.85.
         """
         upper: NotRequired[pulumi.Input[builtins.float]]
         """
-        Specify the upper occupancy limit of the allocated quota of memory for the shard.
-                        If the total memory usage of a shard is above this limit,
-                        shard indexing backpressure increases the current allocated memory for that shard.
-                        Default is 0.95.
+        Specify the upper occupancy limit of the allocated quota of memory for the shard.                    If the total memory usage of a shard is above this limit,                    shard indexing backpressure increases the current allocated memory for that shard.                    Default is 0.95.
         """
 elif False:
     OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFactorArgsDict: TypeAlias = Mapping[str, Any]
@@ -28643,18 +28736,9 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFact
                  optimal: Optional[pulumi.Input[builtins.float]] = None,
                  upper: Optional[pulumi.Input[builtins.float]] = None):
         """
-        :param pulumi.Input[builtins.float] lower: Specify the lower occupancy limit of the allocated quota of memory for the shard.
-                               If the total memory usage of a shard is below this limit,
-                               shard indexing backpressure decreases the current allocated memory for that shard.
-                               Default is 0.75.
-        :param pulumi.Input[builtins.float] optimal: Specify the optimal occupancy of the allocated quota of memory for the shard.
-                               If the total memory usage of a shard is at this level,
-                               shard indexing backpressure doesn’t change the current allocated memory for that shard.
-                               Default is 0.85.
-        :param pulumi.Input[builtins.float] upper: Specify the upper occupancy limit of the allocated quota of memory for the shard.
-                               If the total memory usage of a shard is above this limit,
-                               shard indexing backpressure increases the current allocated memory for that shard.
-                               Default is 0.95.
+        :param pulumi.Input[builtins.float] lower: Specify the lower occupancy limit of the allocated quota of memory for the shard.                    If the total memory usage of a shard is below this limit,                    shard indexing backpressure decreases the current allocated memory for that shard.                    Default is 0.75.
+        :param pulumi.Input[builtins.float] optimal: Specify the optimal occupancy of the allocated quota of memory for the shard.                    If the total memory usage of a shard is at this level,                    shard indexing backpressure doesn’t change the current allocated memory for that shard.                    Default is 0.85.
+        :param pulumi.Input[builtins.float] upper: Specify the upper occupancy limit of the allocated quota of memory for the shard.                    If the total memory usage of a shard is above this limit,                    shard indexing backpressure increases the current allocated memory for that shard.                    Default is 0.95.
         """
         if lower is not None:
             pulumi.set(__self__, "lower", lower)
@@ -28667,10 +28751,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFact
     @pulumi.getter
     def lower(self) -> Optional[pulumi.Input[builtins.float]]:
         """
-        Specify the lower occupancy limit of the allocated quota of memory for the shard.
-                        If the total memory usage of a shard is below this limit,
-                        shard indexing backpressure decreases the current allocated memory for that shard.
-                        Default is 0.75.
+        Specify the lower occupancy limit of the allocated quota of memory for the shard.                    If the total memory usage of a shard is below this limit,                    shard indexing backpressure decreases the current allocated memory for that shard.                    Default is 0.75.
         """
         return pulumi.get(self, "lower")
 
@@ -28682,10 +28763,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFact
     @pulumi.getter
     def optimal(self) -> Optional[pulumi.Input[builtins.float]]:
         """
-        Specify the optimal occupancy of the allocated quota of memory for the shard.
-                        If the total memory usage of a shard is at this level,
-                        shard indexing backpressure doesn’t change the current allocated memory for that shard.
-                        Default is 0.85.
+        Specify the optimal occupancy of the allocated quota of memory for the shard.                    If the total memory usage of a shard is at this level,                    shard indexing backpressure doesn’t change the current allocated memory for that shard.                    Default is 0.85.
         """
         return pulumi.get(self, "optimal")
 
@@ -28697,10 +28775,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressureOperatingFact
     @pulumi.getter
     def upper(self) -> Optional[pulumi.Input[builtins.float]]:
         """
-        Specify the upper occupancy limit of the allocated quota of memory for the shard.
-                        If the total memory usage of a shard is above this limit,
-                        shard indexing backpressure increases the current allocated memory for that shard.
-                        Default is 0.95.
+        Specify the upper occupancy limit of the allocated quota of memory for the shard.                    If the total memory usage of a shard is above this limit,                    shard indexing backpressure increases the current allocated memory for that shard.                    Default is 0.95.
         """
         return pulumi.get(self, "upper")
 
@@ -28749,9 +28824,7 @@ if not MYPY:
     class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParameterNodeArgsDict(TypedDict):
         soft_limit: NotRequired[pulumi.Input[builtins.float]]
         """
-        Define the percentage of the node-level memory
-                                threshold that acts as a soft indicator for strain on a node.
-                                Default is 0.7.
+        Define the percentage of the node-level memory                            threshold that acts as a soft indicator for strain on a node.                            Default is 0.7.
         """
 elif False:
     OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParameterNodeArgsDict: TypeAlias = Mapping[str, Any]
@@ -28761,9 +28834,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParame
     def __init__(__self__, *,
                  soft_limit: Optional[pulumi.Input[builtins.float]] = None):
         """
-        :param pulumi.Input[builtins.float] soft_limit: Define the percentage of the node-level memory
-                                       threshold that acts as a soft indicator for strain on a node.
-                                       Default is 0.7.
+        :param pulumi.Input[builtins.float] soft_limit: Define the percentage of the node-level memory                            threshold that acts as a soft indicator for strain on a node.                            Default is 0.7.
         """
         if soft_limit is not None:
             pulumi.set(__self__, "soft_limit", soft_limit)
@@ -28772,9 +28843,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParame
     @pulumi.getter(name="softLimit")
     def soft_limit(self) -> Optional[pulumi.Input[builtins.float]]:
         """
-        Define the percentage of the node-level memory
-                                threshold that acts as a soft indicator for strain on a node.
-                                Default is 0.7.
+        Define the percentage of the node-level memory                            threshold that acts as a soft indicator for strain on a node.                            Default is 0.7.
         """
         return pulumi.get(self, "soft_limit")
 
@@ -28787,9 +28856,7 @@ if not MYPY:
     class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParameterShardArgsDict(TypedDict):
         min_limit: NotRequired[pulumi.Input[builtins.float]]
         """
-        Specify the minimum assigned quota for a new shard in any role (coordinator, primary, or replica).
-                                Shard indexing backpressure increases or decreases this allocated quota based on the inflow of traffic for the shard.
-                                Default is 0.001.
+        Specify the minimum assigned quota for a new shard in any role (coordinator, primary, or replica).                            Shard indexing backpressure increases or decreases this allocated quota based on the inflow of traffic for the shard.                            Default is 0.001.
         """
 elif False:
     OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParameterShardArgsDict: TypeAlias = Mapping[str, Any]
@@ -28799,9 +28866,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParame
     def __init__(__self__, *,
                  min_limit: Optional[pulumi.Input[builtins.float]] = None):
         """
-        :param pulumi.Input[builtins.float] min_limit: Specify the minimum assigned quota for a new shard in any role (coordinator, primary, or replica).
-                                       Shard indexing backpressure increases or decreases this allocated quota based on the inflow of traffic for the shard.
-                                       Default is 0.001.
+        :param pulumi.Input[builtins.float] min_limit: Specify the minimum assigned quota for a new shard in any role (coordinator, primary, or replica).                            Shard indexing backpressure increases or decreases this allocated quota based on the inflow of traffic for the shard.                            Default is 0.001.
         """
         if min_limit is not None:
             pulumi.set(__self__, "min_limit", min_limit)
@@ -28810,9 +28875,7 @@ class OpenSearchOpensearchUserConfigOpensearchShardIndexingPressurePrimaryParame
     @pulumi.getter(name="minLimit")
     def min_limit(self) -> Optional[pulumi.Input[builtins.float]]:
         """
-        Specify the minimum assigned quota for a new shard in any role (coordinator, primary, or replica).
-                                Shard indexing backpressure increases or decreases this allocated quota based on the inflow of traffic for the shard.
-                                Default is 0.001.
+        Specify the minimum assigned quota for a new shard in any role (coordinator, primary, or replica).                            Shard indexing backpressure increases or decreases this allocated quota based on the inflow of traffic for the shard.                            Default is 0.001.
         """
         return pulumi.get(self, "min_limit")
 
@@ -29890,7 +29953,7 @@ if not MYPY:
     class OrganizationPermissionPermissionArgsDict(TypedDict):
         permissions: pulumi.Input[Sequence[pulumi.Input[builtins.str]]]
         """
-        List of [roles and permissions](https://aiven.io/docs/platform/concepts/permissions) to grant. The possible values are `admin`, `developer`, `operator`, `organization:app_users:write`, `organization:audit_logs:read`, `organization:billing:read`, `organization:billing:write`, `organization:domains:write`, `organization:groups:write`, `organization:idps:write`, `organization:networking:read`, `organization:networking:write`, `organization:projects:write`, `organization:users:write`, `project:audit_logs:read`, `project:integrations:read`, `project:integrations:write`, `project:networking:read`, `project:networking:write`, `project:permissions:read`, `project:services:read`, `project:services:write`, `read_only`, `role:organization:admin`, `role:services:maintenance`, `role:services:recover`, `service:configuration:write`, `service:data:write`, `service:logs:read`, `service:secrets:read` and `service:users:write`.
+        List of [roles and permissions](https://aiven.io/docs/platform/concepts/permissions) to grant. The possible values are `admin`, `developer`, `operator`, `organization:app_users:write`, `organization:audit_logs:read`, `organization:billing:read`, `organization:billing:write`, `organization:domains:write`, `organization:groups:write`, `organization:networking:read`, `organization:networking:write`, `organization:projects:write`, `organization:users:write`, `project:audit_logs:read`, `project:integrations:read`, `project:integrations:write`, `project:networking:read`, `project:networking:write`, `project:permissions:read`, `project:services:read`, `project:services:write`, `read_only`, `role:organization:admin`, `role:services:maintenance`, `role:services:recover`, `service:configuration:write`, `service:data:write`, `service:logs:read`, `service:secrets:read` and `service:users:write`.
         """
         principal_id: pulumi.Input[builtins.str]
         """
@@ -29920,7 +29983,7 @@ class OrganizationPermissionPermissionArgs:
                  create_time: Optional[pulumi.Input[builtins.str]] = None,
                  update_time: Optional[pulumi.Input[builtins.str]] = None):
         """
-        :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] permissions: List of [roles and permissions](https://aiven.io/docs/platform/concepts/permissions) to grant. The possible values are `admin`, `developer`, `operator`, `organization:app_users:write`, `organization:audit_logs:read`, `organization:billing:read`, `organization:billing:write`, `organization:domains:write`, `organization:groups:write`, `organization:idps:write`, `organization:networking:read`, `organization:networking:write`, `organization:projects:write`, `organization:users:write`, `project:audit_logs:read`, `project:integrations:read`, `project:integrations:write`, `project:networking:read`, `project:networking:write`, `project:permissions:read`, `project:services:read`, `project:services:write`, `read_only`, `role:organization:admin`, `role:services:maintenance`, `role:services:recover`, `service:configuration:write`, `service:data:write`, `service:logs:read`, `service:secrets:read` and `service:users:write`.
+        :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] permissions: List of [roles and permissions](https://aiven.io/docs/platform/concepts/permissions) to grant. The possible values are `admin`, `developer`, `operator`, `organization:app_users:write`, `organization:audit_logs:read`, `organization:billing:read`, `organization:billing:write`, `organization:domains:write`, `organization:groups:write`, `organization:networking:read`, `organization:networking:write`, `organization:projects:write`, `organization:users:write`, `project:audit_logs:read`, `project:integrations:read`, `project:integrations:write`, `project:networking:read`, `project:networking:write`, `project:permissions:read`, `project:services:read`, `project:services:write`, `read_only`, `role:organization:admin`, `role:services:maintenance`, `role:services:recover`, `service:configuration:write`, `service:data:write`, `service:logs:read`, `service:secrets:read` and `service:users:write`.
         :param pulumi.Input[builtins.str] principal_id: ID of the user or group to grant permissions to. Only active users who have accepted an [invite](https://aiven.io/docs/platform/howto/manage-org-users) to join the organization can be granted permissions.
         :param pulumi.Input[builtins.str] principal_type: The type of principal. The possible values are `user` and `user_group`.
         :param pulumi.Input[builtins.str] create_time: Time created.
@@ -29938,7 +30001,7 @@ class OrganizationPermissionPermissionArgs:
     @pulumi.getter
     def permissions(self) -> pulumi.Input[Sequence[pulumi.Input[builtins.str]]]:
         """
-        List of [roles and permissions](https://aiven.io/docs/platform/concepts/permissions) to grant. The possible values are `admin`, `developer`, `operator`, `organization:app_users:write`, `organization:audit_logs:read`, `organization:billing:read`, `organization:billing:write`, `organization:domains:write`, `organization:groups:write`, `organization:idps:write`, `organization:networking:read`, `organization:networking:write`, `organization:projects:write`, `organization:users:write`, `project:audit_logs:read`, `project:integrations:read`, `project:integrations:write`, `project:networking:read`, `project:networking:write`, `project:permissions:read`, `project:services:read`, `project:services:write`, `read_only`, `role:organization:admin`, `role:services:maintenance`, `role:services:recover`, `service:configuration:write`, `service:data:write`, `service:logs:read`, `service:secrets:read` and `service:users:write`.
+        List of [roles and permissions](https://aiven.io/docs/platform/concepts/permissions) to grant. The possible values are `admin`, `developer`, `operator`, `organization:app_users:write`, `organization:audit_logs:read`, `organization:billing:read`, `organization:billing:write`, `organization:domains:write`, `organization:groups:write`, `organization:networking:read`, `organization:networking:write`, `organization:projects:write`, `organization:users:write`, `project:audit_logs:read`, `project:integrations:read`, `project:integrations:write`, `project:networking:read`, `project:networking:write`, `project:permissions:read`, `project:services:read`, `project:services:write`, `read_only`, `role:organization:admin`, `role:services:maintenance`, `role:services:recover`, `service:configuration:write`, `service:data:write`, `service:logs:read`, `service:secrets:read` and `service:users:write`.
         """
         return pulumi.get(self, "permissions")
 
@@ -31932,6 +31995,10 @@ if not MYPY:
         """
         Log statements for each temporary file created larger than this number of kilobytes, -1 disables.
         """
+        max_connections: NotRequired[pulumi.Input[builtins.int]]
+        """
+        PostgreSQL maximum number of concurrent connections to the database server. Changing this parameter causes a service restart.
+        """
         max_files_per_process: NotRequired[pulumi.Input[builtins.int]]
         """
         PostgreSQL maximum number of files that can be open per process. The default is `1000` (upstream default). Changing this parameter causes a service restart.
@@ -31980,6 +32047,10 @@ if not MYPY:
         """
         Max standby streaming delay in milliseconds. The default is `30000` (upstream default).
         """
+        max_sync_workers_per_subscription: NotRequired[pulumi.Input[builtins.int]]
+        """
+        Maximum number of synchronization workers per subscription. The default is `2`.
+        """
         max_wal_senders: NotRequired[pulumi.Input[builtins.int]]
         """
         PostgreSQL maximum WAL senders. The default is `20`. Changing this parameter causes a service restart.
@@ -32072,6 +32143,7 @@ class PgPgUserConfigPgArgs:
                  log_line_prefix: Optional[pulumi.Input[builtins.str]] = None,
                  log_min_duration_statement: Optional[pulumi.Input[builtins.int]] = None,
                  log_temp_files: Optional[pulumi.Input[builtins.int]] = None,
+                 max_connections: Optional[pulumi.Input[builtins.int]] = None,
                  max_files_per_process: Optional[pulumi.Input[builtins.int]] = None,
                  max_locks_per_transaction: Optional[pulumi.Input[builtins.int]] = None,
                  max_logical_replication_workers: Optional[pulumi.Input[builtins.int]] = None,
@@ -32084,6 +32156,7 @@ class PgPgUserConfigPgArgs:
                  max_stack_depth: Optional[pulumi.Input[builtins.int]] = None,
                  max_standby_archive_delay: Optional[pulumi.Input[builtins.int]] = None,
                  max_standby_streaming_delay: Optional[pulumi.Input[builtins.int]] = None,
+                 max_sync_workers_per_subscription: Optional[pulumi.Input[builtins.int]] = None,
                  max_wal_senders: Optional[pulumi.Input[builtins.int]] = None,
                  max_worker_processes: Optional[pulumi.Input[builtins.int]] = None,
                  password_encryption: Optional[pulumi.Input[builtins.str]] = None,
@@ -32123,6 +32196,7 @@ class PgPgUserConfigPgArgs:
         :param pulumi.Input[builtins.str] log_line_prefix: Enum: `'%m [%p] %q[user=%u,db=%d,app=%a] '`, `'%t [%p]: [%l-1] user=%u,db=%d,app=%a,client=%h '`, `'pid=%p,user=%u,db=%d,app=%a,client=%h '`, `'pid=%p,user=%u,db=%d,app=%a,client=%h,txid=%x,qid=%Q '`. Choose from one of the available log formats.
         :param pulumi.Input[builtins.int] log_min_duration_statement: Log statements that take more than this number of milliseconds to run, -1 disables.
         :param pulumi.Input[builtins.int] log_temp_files: Log statements for each temporary file created larger than this number of kilobytes, -1 disables.
+        :param pulumi.Input[builtins.int] max_connections: PostgreSQL maximum number of concurrent connections to the database server. Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.int] max_files_per_process: PostgreSQL maximum number of files that can be open per process. The default is `1000` (upstream default). Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.int] max_locks_per_transaction: PostgreSQL maximum locks per transaction. Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.int] max_logical_replication_workers: PostgreSQL maximum logical replication workers (taken from the pool of max*parallel*workers). The default is `4` (upstream default). Changing this parameter causes a service restart.
@@ -32135,6 +32209,7 @@ class PgPgUserConfigPgArgs:
         :param pulumi.Input[builtins.int] max_stack_depth: Maximum depth of the stack in bytes. The default is `2097152` (upstream default).
         :param pulumi.Input[builtins.int] max_standby_archive_delay: Max standby archive delay in milliseconds. The default is `30000` (upstream default).
         :param pulumi.Input[builtins.int] max_standby_streaming_delay: Max standby streaming delay in milliseconds. The default is `30000` (upstream default).
+        :param pulumi.Input[builtins.int] max_sync_workers_per_subscription: Maximum number of synchronization workers per subscription. The default is `2`.
         :param pulumi.Input[builtins.int] max_wal_senders: PostgreSQL maximum WAL senders. The default is `20`. Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.int] max_worker_processes: Sets the maximum number of background processes that the system can support. The default is `8`. Changing this parameter causes a service restart.
         :param pulumi.Input[builtins.str] password_encryption: Enum: `md5`, `scram-sha-256`. Chooses the algorithm for encrypting passwords. Default: `md5`.
@@ -32196,6 +32271,8 @@ class PgPgUserConfigPgArgs:
             pulumi.set(__self__, "log_min_duration_statement", log_min_duration_statement)
         if log_temp_files is not None:
             pulumi.set(__self__, "log_temp_files", log_temp_files)
+        if max_connections is not None:
+            pulumi.set(__self__, "max_connections", max_connections)
         if max_files_per_process is not None:
             pulumi.set(__self__, "max_files_per_process", max_files_per_process)
         if max_locks_per_transaction is not None:
@@ -32220,6 +32297,8 @@ class PgPgUserConfigPgArgs:
             pulumi.set(__self__, "max_standby_archive_delay", max_standby_archive_delay)
         if max_standby_streaming_delay is not None:
             pulumi.set(__self__, "max_standby_streaming_delay", max_standby_streaming_delay)
+        if max_sync_workers_per_subscription is not None:
+            pulumi.set(__self__, "max_sync_workers_per_subscription", max_sync_workers_per_subscription)
         if max_wal_senders is not None:
             pulumi.set(__self__, "max_wal_senders", max_wal_senders)
         if max_worker_processes is not None:
@@ -32517,6 +32596,18 @@ class PgPgUserConfigPgArgs:
     def log_temp_files(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "log_temp_files", value)
 
+    @property
+    @pulumi.getter(name="maxConnections")
+    def max_connections(self) -> Optional[pulumi.Input[builtins.int]]:
+        """
+        PostgreSQL maximum number of concurrent connections to the database server. Changing this parameter causes a service restart.
+        """
+        return pulumi.get(self, "max_connections")
+
+    @max_connections.setter
+    def max_connections(self, value: Optional[pulumi.Input[builtins.int]]):
+        pulumi.set(self, "max_connections", value)
+
     @property
     @pulumi.getter(name="maxFilesPerProcess")
     def max_files_per_process(self) -> Optional[pulumi.Input[builtins.int]]:
@@ -32661,6 +32752,18 @@ class PgPgUserConfigPgArgs:
     def max_standby_streaming_delay(self, value: Optional[pulumi.Input[builtins.int]]):
         pulumi.set(self, "max_standby_streaming_delay", value)
 
+    @property
+    @pulumi.getter(name="maxSyncWorkersPerSubscription")
+    def max_sync_workers_per_subscription(self) -> Optional[pulumi.Input[builtins.int]]:
+        """
+        Maximum number of synchronization workers per subscription. The default is `2`.
+        """
+        return pulumi.get(self, "max_sync_workers_per_subscription")
+
+    @max_sync_workers_per_subscription.setter
+    def max_sync_workers_per_subscription(self, value: Optional[pulumi.Input[builtins.int]]):
+        pulumi.set(self, "max_sync_workers_per_subscription", value)
+
     @property
     @pulumi.getter(name="maxWalSenders")
     def max_wal_senders(self) -> Optional[pulumi.Input[builtins.int]]:
@@ -32994,7 +33097,7 @@ if not MYPY:
         """
         log_catalog: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies that session logging should be enabled in the casewhere all relations in a statement are in pg_catalog. Default: `true`.
+        Specifies that session logging should be enabled in the case where all relationsin a statement are in pg_catalog. Default: `true`.
         """
         log_client: NotRequired[pulumi.Input[builtins.bool]]
         """
@@ -33006,11 +33109,11 @@ if not MYPY:
         """
         log_max_string_length: NotRequired[pulumi.Input[builtins.int]]
         """
-        Crop parameters representation and whole statements if they exceed this threshold. A (default) value of -1 disable the truncation. Default: `-1`.
+        Crop parameters representation and whole statements if they exceed this threshold.A (default) value of -1 disable the truncation. Default: `-1`.
         """
         log_nested_statements: NotRequired[pulumi.Input[builtins.bool]]
         """
-        This GUC allows to turn off logging nested statements, that is, statements that are executed as part of another ExecutorRun. Default: `true`.
+        This GUC allows to turn off logging nested statements, that is, statements that areexecuted as part of another ExecutorRun. Default: `true`.
         """
         log_parameter: NotRequired[pulumi.Input[builtins.bool]]
         """
@@ -33018,15 +33121,15 @@ if not MYPY:
         """
         log_parameter_max_size: NotRequired[pulumi.Input[builtins.int]]
         """
-        Specifies that parameter values longer than this setting (in bytes) should not be logged, but replaced with \\n\\n. Default: `0`.
+        Specifies that parameter values longer than this setting (in bytes) should not be logged,but replaced with \\n\\n. Default: `0`.
         """
         log_relation: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies whether session audit logging should create a separate log entry for each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
+        Specifies whether session audit logging should create a separate log entryfor each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
         """
         log_rows: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies that audit logging should include the rows retrieved or affected by a statement. When enabled the rows field will be included after the parameter field. Default: `false`.
+        Log Rows. Default: `false`.
         """
         log_statement: NotRequired[pulumi.Input[builtins.bool]]
         """
@@ -33034,7 +33137,7 @@ if not MYPY:
         """
         log_statement_once: NotRequired[pulumi.Input[builtins.bool]]
         """
-        Specifies whether logging will include the statement text and parameters with the first log entry for a statement/substatement combination or with every entry. Default: `false`.
+        Specifies whether logging will include the statement text and parameters withthe first log entry for a statement/substatement combination or with every entry. Default: `false`.
         """
         logs: NotRequired[pulumi.Input[Sequence[pulumi.Input[builtins.str]]]]
         """
@@ -33066,17 +33169,17 @@ class PgPgUserConfigPgauditArgs:
                  role: Optional[pulumi.Input[builtins.str]] = None):
         """
         :param pulumi.Input[builtins.bool] feature_enabled: Enable pgaudit extension. When enabled, pgaudit extension will be automatically installed.Otherwise, extension will be uninstalled but auditing configurations will be preserved. Default: `false`.
-        :param pulumi.Input[builtins.bool] log_catalog: Specifies that session logging should be enabled in the casewhere all relations in a statement are in pg_catalog. Default: `true`.
+        :param pulumi.Input[builtins.bool] log_catalog: Specifies that session logging should be enabled in the case where all relationsin a statement are in pg_catalog. Default: `true`.
         :param pulumi.Input[builtins.bool] log_client: Specifies whether log messages will be visible to a client process such as psql. Default: `false`.
         :param pulumi.Input[builtins.str] log_level: Enum: `debug1`, `debug2`, `debug3`, `debug4`, `debug5`, `info`, `log`, `notice`, `warning`. Specifies the log level that will be used for log entries. Default: `log`.
-        :param pulumi.Input[builtins.int] log_max_string_length: Crop parameters representation and whole statements if they exceed this threshold. A (default) value of -1 disable the truncation. Default: `-1`.
-        :param pulumi.Input[builtins.bool] log_nested_statements: This GUC allows to turn off logging nested statements, that is, statements that are executed as part of another ExecutorRun. Default: `true`.
+        :param pulumi.Input[builtins.int] log_max_string_length: Crop parameters representation and whole statements if they exceed this threshold.A (default) value of -1 disable the truncation. Default: `-1`.
+        :param pulumi.Input[builtins.bool] log_nested_statements: This GUC allows to turn off logging nested statements, that is, statements that areexecuted as part of another ExecutorRun. Default: `true`.
         :param pulumi.Input[builtins.bool] log_parameter: Specifies that audit logging should include the parameters that were passed with the statement. Default: `false`.
-        :param pulumi.Input[builtins.int] log_parameter_max_size: Specifies that parameter values longer than this setting (in bytes) should not be logged, but replaced with \\n\\n. Default: `0`.
-        :param pulumi.Input[builtins.bool] log_relation: Specifies whether session audit logging should create a separate log entry for each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
-        :param pulumi.Input[builtins.bool] log_rows: Specifies that audit logging should include the rows retrieved or affected by a statement. When enabled the rows field will be included after the parameter field. Default: `false`.
+        :param pulumi.Input[builtins.int] log_parameter_max_size: Specifies that parameter values longer than this setting (in bytes) should not be logged,but replaced with \\n\\n. Default: `0`.
+        :param pulumi.Input[builtins.bool] log_relation: Specifies whether session audit logging should create a separate log entryfor each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
+        :param pulumi.Input[builtins.bool] log_rows: Log Rows. Default: `false`.
         :param pulumi.Input[builtins.bool] log_statement: Specifies whether logging will include the statement text and parameters (if enabled). Default: `true`.
-        :param pulumi.Input[builtins.bool] log_statement_once: Specifies whether logging will include the statement text and parameters with the first log entry for a statement/substatement combination or with every entry. Default: `false`.
+        :param pulumi.Input[builtins.bool] log_statement_once: Specifies whether logging will include the statement text and parameters withthe first log entry for a statement/substatement combination or with every entry. Default: `false`.
         :param pulumi.Input[Sequence[pulumi.Input[builtins.str]]] logs: Specifies which classes of statements will be logged by session audit logging.
         :param pulumi.Input[builtins.str] role: Specifies the master role to use for object audit logging.
         """
@@ -33125,7 +33228,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logCatalog")
     def log_catalog(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies that session logging should be enabled in the casewhere all relations in a statement are in pg_catalog. Default: `true`.
+        Specifies that session logging should be enabled in the case where all relationsin a statement are in pg_catalog. Default: `true`.
         """
         return pulumi.get(self, "log_catalog")
 
@@ -33161,7 +33264,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logMaxStringLength")
     def log_max_string_length(self) -> Optional[pulumi.Input[builtins.int]]:
         """
-        Crop parameters representation and whole statements if they exceed this threshold. A (default) value of -1 disable the truncation. Default: `-1`.
+        Crop parameters representation and whole statements if they exceed this threshold.A (default) value of -1 disable the truncation. Default: `-1`.
         """
         return pulumi.get(self, "log_max_string_length")
 
@@ -33173,7 +33276,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logNestedStatements")
     def log_nested_statements(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        This GUC allows to turn off logging nested statements, that is, statements that are executed as part of another ExecutorRun. Default: `true`.
+        This GUC allows to turn off logging nested statements, that is, statements that areexecuted as part of another ExecutorRun. Default: `true`.
         """
         return pulumi.get(self, "log_nested_statements")
 
@@ -33197,7 +33300,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logParameterMaxSize")
     def log_parameter_max_size(self) -> Optional[pulumi.Input[builtins.int]]:
         """
-        Specifies that parameter values longer than this setting (in bytes) should not be logged, but replaced with \\n\\n. Default: `0`.
+        Specifies that parameter values longer than this setting (in bytes) should not be logged,but replaced with \\n\\n. Default: `0`.
         """
         return pulumi.get(self, "log_parameter_max_size")
 
@@ -33209,7 +33312,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logRelation")
     def log_relation(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies whether session audit logging should create a separate log entry for each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
+        Specifies whether session audit logging should create a separate log entryfor each relation (TABLE, VIEW, etc.) referenced in a SELECT or DML statement. Default: `false`.
         """
         return pulumi.get(self, "log_relation")
 
@@ -33221,7 +33324,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logRows")
     def log_rows(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies that audit logging should include the rows retrieved or affected by a statement. When enabled the rows field will be included after the parameter field. Default: `false`.
+        Log Rows. Default: `false`.
         """
         return pulumi.get(self, "log_rows")
 
@@ -33245,7 +33348,7 @@ class PgPgUserConfigPgauditArgs:
     @pulumi.getter(name="logStatementOnce")
     def log_statement_once(self) -> Optional[pulumi.Input[builtins.bool]]:
         """
-        Specifies whether logging will include the statement text and parameters with the first log entry for a statement/substatement combination or with every entry. Default: `false`.
+        Specifies whether logging will include the statement text and parameters withthe first log entry for a statement/substatement combination or with every entry. Default: `false`.
         """
         return pulumi.get(self, "log_statement_once")
 
@@ -35319,6 +35422,69 @@ class RedisTechEmailArgs:
         pulumi.set(self, "email", value)
 
 
+if not MYPY:
+    class ServiceIntegrationClickhouseCredentialsUserConfigArgsDict(TypedDict):
+        grants: NotRequired[pulumi.Input[Sequence[pulumi.Input['ServiceIntegrationClickhouseCredentialsUserConfigGrantArgsDict']]]]
+        """
+        Grants to assign
+        """
+elif False:
+    ServiceIntegrationClickhouseCredentialsUserConfigArgsDict: TypeAlias = Mapping[str, Any]
+
+@pulumi.input_type
+class ServiceIntegrationClickhouseCredentialsUserConfigArgs:
+    def __init__(__self__, *,
+                 grants: Optional[pulumi.Input[Sequence[pulumi.Input['ServiceIntegrationClickhouseCredentialsUserConfigGrantArgs']]]] = None):
+        """
+        :param pulumi.Input[Sequence[pulumi.Input['ServiceIntegrationClickhouseCredentialsUserConfigGrantArgs']]] grants: Grants to assign
+        """
+        if grants is not None:
+            pulumi.set(__self__, "grants", grants)
+
+    @property
+    @pulumi.getter
+    def grants(self) -> Optional[pulumi.Input[Sequence[pulumi.Input['ServiceIntegrationClickhouseCredentialsUserConfigGrantArgs']]]]:
+        """
+        Grants to assign
+        """
+        return pulumi.get(self, "grants")
+
+    @grants.setter
+    def grants(self, value: Optional[pulumi.Input[Sequence[pulumi.Input['ServiceIntegrationClickhouseCredentialsUserConfigGrantArgs']]]]):
+        pulumi.set(self, "grants", value)
+
+
+if not MYPY:
+    class ServiceIntegrationClickhouseCredentialsUserConfigGrantArgsDict(TypedDict):
+        user: pulumi.Input[builtins.str]
+        """
+        User or role to assign the grant to. Example: `alice`.
+        """
+elif False:
+    ServiceIntegrationClickhouseCredentialsUserConfigGrantArgsDict: TypeAlias = Mapping[str, Any]
+
+@pulumi.input_type
+class ServiceIntegrationClickhouseCredentialsUserConfigGrantArgs:
+    def __init__(__self__, *,
+                 user: pulumi.Input[builtins.str]):
+        """
+        :param pulumi.Input[builtins.str] user: User or role to assign the grant to. Example: `alice`.
+        """
+        pulumi.set(__self__, "user", user)
+
+    @property
+    @pulumi.getter
+    def user(self) -> pulumi.Input[builtins.str]:
+        """
+        User or role to assign the grant to. Example: `alice`.
+        """
+        return pulumi.get(self, "user")
+
+    @user.setter
+    def user(self, value: pulumi.Input[builtins.str]):
+        pulumi.set(self, "user", value)
+
+
 if not MYPY:
     class ServiceIntegrationClickhouseKafkaUserConfigArgsDict(TypedDict):
         tables: NotRequired[pulumi.Input[Sequence[pulumi.Input['ServiceIntegrationClickhouseKafkaUserConfigTableArgsDict']]]]