pennylane-qrack 0.11.4__py3-none-macosx_15_0_arm64.whl → 0.11.6__py3-none-macosx_15_0_arm64.whl

pennylane_qrack/QrackDeviceConfig.toml

@@ -1,67 +1,88 @@
-schema = 3
+# Which version of the specification format is being used.
+schema = 2
 
-# The set of all gate types supported at the runtime execution interface of the
-# device, i.e., what is supported by the `execute` method. The gate definitions
-# should have the following format:
+# The union of all gate types listed in this section must match what
+# the device considers "supported" through PennyLane's device API.
+# The gate definition has the following format:
 #
-#   GATE = { properties = [ PROPS ], conditions = [ CONDS ] }
+#   GATE = { properties = [ PROPS ], condition = [ COND ] }
 #
-# where PROPS and CONS are zero or more comma separated quoted strings.
+# Where:
 #
-# PROPS: additional support provided for each gate.
-#        - "controllable": if a controlled version of this gate is supported.
-#        - "invertible": if the adjoint of this operation is supported.
-#        - "differentiable": if device gradient is supported for this gate.
-# CONDS: constraints on the support for each gate.
-#        - "analytic" or "finiteshots": if this operation is only supported in
-#          either analytic execution or with shots, respectively.
+#   PROPS: zero or more comma-separated quoted strings:
+#          "controllable", "invertible", "differentiable"
+#   COND: quoted string, on of:
+#         "analytic", "finiteshots"
 #
-[operators.gates]
+[operators.gates.native]
 
-PauliX                  = { properties = [ "controllable", "invertible" ] }
-PauliY                  = { properties = [ "controllable", "invertible" ] }
-PauliZ                  = { properties = [ "controllable", "invertible" ] }
-SX                      = { properties = [ "controllable", "invertible" ] }
-MultiRZ                 = { properties = [ "controllable", "invertible" ] }
-Hadamard                = { properties = [ "controllable", "invertible" ] }
-S                       = { properties = [ "controllable", "invertible" ] }
-T                       = { properties = [ "controllable", "invertible" ] }
-CNOT                    = { properties = [ "controllable", "invertible" ] }
-SWAP                    = { properties = [ "controllable", "invertible" ] }
-CSWAP                   = { properties = [ "controllable", "invertible" ] }
-ISWAP                   = { properties = [ "controllable", "invertible" ] }
-PSWAP                   = { properties = [ "controllable", "invertible" ] }
-Toffoli                 = { properties = [ "controllable", "invertible" ] }
-CY                      = { properties = [ "controllable", "invertible" ] }
-CZ                      = { properties = [ "controllable", "invertible" ] }
-PhaseShift              = { properties = [ "controllable", "invertible" ] }
-ControlledPhaseShift    = { properties = [ "controllable", "invertible" ] }
-CPhase                  = { properties = [ "controllable", "invertible" ] }
-RX                      = { properties = [ "controllable", "invertible" ] }
-RY                      = { properties = [ "controllable", "invertible" ] }
-RZ                      = { properties = [ "controllable", "invertible" ] }
-Rot                     = { properties = [ "controllable", "invertible" ] }
-CRX                     = { properties = [ "controllable", "invertible" ] }
-CRY                     = { properties = [ "controllable", "invertible" ] }
-CRZ                     = { properties = [ "controllable", "invertible" ] }
-CRot                    = { properties = [ "controllable", "invertible" ] }
-U3                      = { properties = [ "controllable", "invertible" ] }
-MultiControlledX        = { properties = [ "controllable", "invertible" ] }
-Identity                = { properties = [ "controllable", "invertible" ] }
+PauliX = { properties = [ "controllable", "invertible"] }
+PauliY = { properties = [ "controllable", "invertible"] }
+PauliZ = { properties = [ "controllable", "invertible"] }
+SX = { properties = [ "controllable", "invertible"] }
+MultiRZ = { properties = [ "controllable", "invertible" ] }
+Hadamard = { properties = [ "controllable", "invertible"] }
+S = { properties = [ "controllable", "invertible" ] }
+T = { properties = [ "controllable", "invertible" ] }
+CNOT = { properties = [ "controllable", "invertible" ] }
+SWAP = { properties = [ "controllable", "invertible" ] }
+CSWAP = { properties = [ "controllable", "invertible" ] }
+ISWAP = { properties = [ "controllable", "invertible"] }
+PSWAP = { properties = [ "controllable", "invertible"] }
+Toffoli = { properties = [ "controllable", "invertible" ] }
+CY = { properties = [ "controllable", "invertible" ] }
+CZ = { properties = [ "controllable", "invertible" ] }
+PhaseShift = { properties = [ "controllable", "invertible" ] }
+ControlledPhaseShift = { properties = [ "controllable", "invertible" ] }
+CPhase = { properties = [ "controllable", "invertible" ] }
+RX = { properties = [ "controllable", "invertible" ] }
+RY = { properties = [ "controllable", "invertible" ] }
+RZ = { properties = [ "controllable", "invertible" ] }
+Rot = { properties = [ "controllable", "invertible" ] }
+CRX = { properties = [ "controllable", "invertible" ] }
+CRY = { properties = [ "controllable", "invertible" ] }
+CRZ = { properties = [ "controllable", "invertible" ] }
+CRot = { properties = [ "controllable", "invertible" ] }
+U3 = { properties = [ "controllable", "invertible" ] }
+MultiControlledX = { properties = [ "controllable", "invertible" ] }
+Identity = { properties = [ "controllable", "invertible" ] }
 
-# Observables supported by the device for measurements. The observables defined
-# in this section should have the following format:
-#
-#   OBSERVABLE = { conditions = [ CONDS ] }
-#
-# where CONDS is zero or more comma separated quoted strings, same as above.
-#
-# CONDS: constraints on the support for each observable.
-#        - "analytic" or "finiteshots": if this observable is only supported in
-#          either analytic execution or with shots, respectively.
-#        - "terms-commute": if a composite operator is only supported under the
-#          condition that its terms commute.
-#
+# Operators that should be decomposed according to the algorithm used
+# by PennyLane's device API.
+# Optional, since gates not listed in this list will typically be decomposed by
+# default, but can be useful to express a deviation from this device's regular
+# strategy in PennyLane.
+# [operators.gates.decomp]
+
+# QubitUnitary = {}
+# SISWAP = {}
+# SQISW = {}
+# BasisState = {}
+# StatePrep = {}
+# ControlledQubitUnitary = {}
+# DiagonalQubitUnitary = {}
+# SingleExcitation = {}
+# SingleExcitationPlus = {}
+# SingleExcitationMinus = {}
+# DoubleExcitation = {}
+# DoubleExcitationPlus = {}
+# DoubleExcitationMinus = {}
+# QubitCarry = {}
+# QubitSum = {}
+# OrbitalRotation = {}
+# ECR = {}
+# IsingXX = {}
+# IsingYY = {}
+# IsingZZ = {}
+# IsingXY = {}
+# U2 = {}
+# U1 = {}
+# QFT = {}
+
+# Gates which should be translated to QubitUnitary
+# [operators.gates.matrix]
+
+# Observables supported by the device
 [operators.observables]
 
 PauliX = {}
@@ -78,40 +99,60 @@ Prod = {}
 # SProd = {}
 # Exp = {}
 
-# Types of measurement processes supported on the device. The measurements in
-# this section should have the following format:
-#
-#   MEASUREMENT_PROCESS = { conditions = [ CONDS ] }
-#
-# where CONDS is zero or more comma separated quoted strings, same as above.
-#
-# CONDS: constraints on the support for each measurement process.
-#        - "analytic" or "finiteshots": if this measurement is only supported
-#          in either analytic execution or with shots, respectively.
-#
 [measurement_processes]
 
-ExpectationMP   = { conditions = [ "analytic" ] }
-VarianceMP      = { conditions = [ "analytic" ] }
-ProbabilityMP   = { conditions = [ "analytic" ] }
-StateMP         = { conditions = [ "analytic" ] }
-SampleMP        = { conditions = [ "finiteshots" ] }
-CountsMP        = { conditions = [ "finiteshots" ] }
+Expval = { condition = [ "analytic" ] }
+Var = { condition = [ "analytic" ] }
+Probs = { condition = [ "analytic" ] }
+State  = { condition = [ "analytic" ] }
+Sample = { condition = [ "finiteshots" ] }
+Counts = { condition = [ "finiteshots" ] }
 
-# Additional support that the device may provide that informs the compilation
-# process. All accepted fields and their default values are listed below.
 [compilation]
 
-# Whether the device is compatible with qjit.
+# If the device is compatible with qjit
 qjit_compatible = true
-
-# Whether the device requires run time generation of the quantum circuit.
+# If the device requires run time generation of the quantum circuit.
 runtime_code_generation = false
-
-# Whether the device supports allocating and releasing qubits during execution.
+# If the device supports mid circuit measurements natively
+mid_circuit_measurement = true
+# This field is currently unchecked but it is reserved for the purpose of
+# determining if the device supports dynamic qubit allocation/deallocation.
 dynamic_qubit_management = true
 
-# The methods of handling mid-circuit measurements that the device supports,
-# e.g., "one-shot", "tree-traversal", "device", etc. An empty list indicates
-# that the device does not support mid-circuit measurements.
-supported_mcm_methods = [ "device", "one-shot" ]
+[options]
+# Options is an optional field.
+# These options represent runtime parameters that can be passed to the device
+# upon the device initialization.
+# The option key will be the key in a dictionary.
+# The string corresponds to a field queried in the `qml.Device` instance.
+
+# Use "hybrid" stabilizer optimization? (Default is "true"; non-Clifford circuits will fall back to near-Clifford or universal simulation)
+is_hybrid_stabilizer = "isStabilizerHybrid"
+# Use "tensor network" optimization? (Default is "true"; prevents dynamic qubit de-allocation; might function sub-optimally with "hybrid" stabilizer enabled)
+is_tensor_network = "isTensorNetwork"
+# Use Schmidt decomposition optimizations? (Default is "true")
+is_schmidt_decomposed = "isSchmidtDecompose"
+# Distribute Schmidt-decomposed qubit subsystems to multiple GPUs or accelerators, if available? (Default is "true"; mismatched device capacities might hurt overall performance)
+is_schmidt_decomposition_parallel = "isSchmidtDecomposeMulti"
+# Use "quantum binary decision diagram" ("QBDD") methods? (Default is "false"; note that QBDD is CPU-only)
+is_qbdd = "isBinaryDecisionTree"
+# Use GPU acceleration? (Default is "true")
+is_gpu = "isOpenCL"
+# Use multi-GPU (or "multi-page") acceleration? (Default is "false")
+is_paged = "isPaged"
+# Use CPU/GPU method hybridization? (Default is "false")
+is_hybrid_cpu_gpu = "isCpuGpuHybrid"
+# Allocate GPU buffer from general host heap? (Default is "false"; "true" might improve performance or reliability in certain cases, like if using an Intel HD as accelerator)
+is_host_pointer = "isHostPointer"
+# Noise parameter. (Default is "0"; depolarizing noise intensity can also be controlled by "QRACK_GATE_DEPOLARIZATION" environment variable)
+noise = "noise"
+
+# In the above example, a dictionary will be constructed at run time.
+# The dictionary will contain the string key "option_key" and its value
+# will be the value in `qml.Device` `option_field`.
+# The value can be any Python type, but will be converted to a string.
+# During the initialization of your `class QuantumDevice`, the dictionary
+# will be sent to the constructor of your implementation of `class QuantumDevice`.
+# The dictionary will be a JSON string like the following:
+# { 'option_key': option_field }

pennylane_qrack/_version.py

@@ -16,4 +16,4 @@
    Version number (major.minor.patch[-label])
 """
 
-__version__ = "0.11.4"
+__version__ = "0.11.6"

pennylane_qrack/qrack_device.py

@@ -141,7 +141,7 @@ class QrackDevice(QubitDevice):
         "C(MultiControlledX)",
     }
 
-    config_filepath = pathlib.Path(
+    config = pathlib.Path(
         os.path.dirname(sys.modules[__name__].__file__) + "/QrackDeviceConfig.toml"
     )
 
@@ -213,18 +213,6 @@ class QrackDevice(QubitDevice):
             isHostPointer=self.isHostPointer,
             noise=self.noise,
         )
-        self.device_kwargs = {
-            "is_hybrid_stabilizer": self.isStabilizerHybrid,
-            "is_tensor_network": self.isTensorNetwork,
-            "is_schmidt_decompose": self.isSchmidtDecompose,
-            "is_schmidt_decompose_parallel": self.isSchmidtDecomposeMulti,
-            "is_qpdd": self.isBinaryDecisionTree,
-            "is_gpu": self.isOpenCL,
-            "is_paged": self.isPaged,
-            "is_hybrid_cpu_gpu": self.isCpuGpuHybrid,
-            "is_host_pointer": self.isHostPointer,
-            "noise": self.noise,
-        }
         self._circuit = []
 
     def _reverse_state(self):

{pennylane_qrack-0.11.4.dist-info → pennylane_qrack-0.11.6.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: pennylane-qrack
-Version: 0.11.4
+Version: 0.11.6
 Summary: PennyLane plugin for Qrack.
 Home-page: http://github.com/vm6502q
 Maintainer: vm6502q

pennylane_qrack-0.11.6.dist-info/RECORD

@@ -0,0 +1,15 @@
+pennylane_qrack/CMakeCache.txt,sha256=-o_DkWt_5KOXhjaHDvt_o0VTdt09REaYsRXmd4w2QSU,15959
+pennylane_qrack/Makefile,sha256=jASrk2mN10ROAVkuiKQiRyL0sQMlaSwIrqw4XInDf4w,7619
+pennylane_qrack/QrackDeviceConfig.toml,sha256=qIamMrYN8kqkhoAuYrgmvmaUi3JXdjXLlhjMrpxIZK8,6379
+pennylane_qrack/__init__.py,sha256=_g4NKu07_pXqxvQaxjdAPe769S5tWwYjqyHi3z7YKHc,673
+pennylane_qrack/_version.py,sha256=ljaTxt5k_GcPpU8iyXnJkLj_YCskNVrUnmuqfNlJExs,692
+pennylane_qrack/cmake_install.cmake,sha256=uwCdcDnmr0FnVfJBX6v3LLwjCl4T9EE79Tkeg0SlrTI,3270
+pennylane_qrack/libqrack_device.dylib,sha256=o0MxQ2P3xgP38plb6IqdhZyQr6K6DlCOiGmGHzClkBA,3181144
+pennylane_qrack/qrack_device.cpp,sha256=KmFmugfYT_q2wt_iSvaHkhD3CzUe5UrlT_OYdNlVEgo,36953
+pennylane_qrack/qrack_device.py,sha256=hfzQ7Bz7iY7LwRGELVHTAU5Dic1k_QVU9yxU9FQecsI,27316
+pennylane_qrack-0.11.6.dist-info/LICENSE,sha256=xx0jnfkXJvxRnG63LTGOxlggYnIysveWIZ6H3PNdCrQ,11357
+pennylane_qrack-0.11.6.dist-info/METADATA,sha256=F8DmkBq0OzHBBgdAdPVBrvMot6DEh590r6ZU0-SYqNA,5527
+pennylane_qrack-0.11.6.dist-info/WHEEL,sha256=ip8oVirf8ZzjhO8E5_X8ymzZjjMZ0FQ_Gm2472UfBGE,105
+pennylane_qrack-0.11.6.dist-info/entry_points.txt,sha256=V6f1sN6IZZZaEvxrI47A3K_kksp8fDUWjLWD0Met7Ww,79
+pennylane_qrack-0.11.6.dist-info/top_level.txt,sha256=5NFMNHqCHtVLwNkLg66xz846uUJAlnOJ5VGa6ulW1ow,16
+pennylane_qrack-0.11.6.dist-info/RECORD,,

pennylane_qrack-0.11.4.dist-info/RECORD

@@ -1,15 +0,0 @@
-pennylane_qrack/CMakeCache.txt,sha256=-o_DkWt_5KOXhjaHDvt_o0VTdt09REaYsRXmd4w2QSU,15959
-pennylane_qrack/Makefile,sha256=jASrk2mN10ROAVkuiKQiRyL0sQMlaSwIrqw4XInDf4w,7619
-pennylane_qrack/QrackDeviceConfig.toml,sha256=oR9-dIAP6BzP3e2QSLroacaloHZsx7iJiKE6w7LGxUo,5459
-pennylane_qrack/__init__.py,sha256=_g4NKu07_pXqxvQaxjdAPe769S5tWwYjqyHi3z7YKHc,673
-pennylane_qrack/_version.py,sha256=x8KAy_lD2t21XCtYqJ85gPvz-v5qiUyE3TPIhL7XYBI,692
-pennylane_qrack/cmake_install.cmake,sha256=uwCdcDnmr0FnVfJBX6v3LLwjCl4T9EE79Tkeg0SlrTI,3270
-pennylane_qrack/libqrack_device.dylib,sha256=bOFhQiSaCeV5xWGts1-z9wpId7lGX6T5LqvXlxBvK1I,3181144
-pennylane_qrack/qrack_device.cpp,sha256=KmFmugfYT_q2wt_iSvaHkhD3CzUe5UrlT_OYdNlVEgo,36953
-pennylane_qrack/qrack_device.py,sha256=Vr_j4UkvMmcCd14pkmjeYIr1DscmfPqZuvjewdat4jY,27881
-pennylane_qrack-0.11.4.dist-info/LICENSE,sha256=xx0jnfkXJvxRnG63LTGOxlggYnIysveWIZ6H3PNdCrQ,11357
-pennylane_qrack-0.11.4.dist-info/METADATA,sha256=HBbsHqb-6F3D0ytxrLIZ6UvgXb4UM8HERS-gJjvinvQ,5527
-pennylane_qrack-0.11.4.dist-info/WHEEL,sha256=ip8oVirf8ZzjhO8E5_X8ymzZjjMZ0FQ_Gm2472UfBGE,105
-pennylane_qrack-0.11.4.dist-info/entry_points.txt,sha256=V6f1sN6IZZZaEvxrI47A3K_kksp8fDUWjLWD0Met7Ww,79
-pennylane_qrack-0.11.4.dist-info/top_level.txt,sha256=5NFMNHqCHtVLwNkLg66xz846uUJAlnOJ5VGa6ulW1ow,16
-pennylane_qrack-0.11.4.dist-info/RECORD,,