openepd 6.17.0__py3-none-any.whl → 6.18.0__py3-none-any.whl

openepd/__version__.py

@@ -13,4 +13,4 @@
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #
-VERSION = "6.17.0"
+VERSION = "6.18.0"

openepd/model/specs/range/__init__.py

@@ -33,7 +33,7 @@ from .conveying_equipment import ConveyingEquipmentRangeV1
 from .electrical import ElectricalRangeV1
 from .electrical_transmission_and_distribution_equipment import ElectricalTransmissionAndDistributionEquipmentRangeV1
 from .electricity import ElectricityRangeV1
-from .exterior_improvements import ExteriorImprovementsV1
+from .exterior_improvements import ExteriorImprovementsRangeV1
 from .finishes import FinishesRangeV1
 from .fire_and_smoke_protection import FireAndSmokeProtectionRangeV1
 from .furnishings import FurnishingsRangeV1
@@ -100,4 +100,4 @@ class SpecsRange(BaseOpenEpdHierarchicalSpec):
     MechanicalInsulation: MechanicalInsulationRangeV1 | None = None
     OtherElectricalEquipment: OtherElectricalEquipmentRangeV1 | None = None
     WoodJoists: WoodJoistsRangeV1 | None = None
-    ExteriorImprovements: ExteriorImprovementsV1 | None = None
+    ExteriorImprovements: ExteriorImprovementsRangeV1 | None = None

openepd/model/specs/range/exterior_improvements.py

@@ -18,7 +18,7 @@ from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 from openepd.model.validation.quantity import AmountRangePressureMpa
 
 
-class ConcretePaversV1(BaseOpenEpdHierarchicalSpec):
+class ConcretePaversRangeV1(BaseOpenEpdHierarchicalSpec):
     """
     Segmental units of concrete of standardized sizes and shapes for use in paving applications.
 
@@ -38,9 +38,9 @@ class ConcretePaversV1(BaseOpenEpdHierarchicalSpec):
     white_cement: bool | None = pyd.Field(default=None, description="CMU using some portion of white cement")
 
 
-class ExteriorImprovementsV1(BaseOpenEpdHierarchicalSpec):
+class ExteriorImprovementsRangeV1(BaseOpenEpdHierarchicalSpec):
     """Products that alter the exterior appearance of a lot or its structures."""
 
     _EXT_VERSION = "1.0"
 
-    ConcretePavers: ConcretePaversV1 | None = None
+    ConcretePavers: ConcretePaversRangeV1 | None = None

openepd/model/specs/range/finishes.py

@@ -50,10 +50,6 @@ from openepd.model.common import RangeAmount, RangeFloat, RangeInt, RangeRatioFl
 from openepd.model.org import OrgRef
 from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 from openepd.model.specs.enums import (
-    AccessFlooringCoreMaterial,
-    AccessFlooringFinishMaterial,
-    AccessFlooringSeismicRating,
-    AccessFlooringStringers,
     AllFabrication,
     CarpetFormFactor,
     CarpetIntendedApplication,
@@ -76,17 +72,16 @@ from openepd.model.specs.enums import (
     WoodFlooringFabrication,
     WoodFlooringTimberSpecies,
 )
+from openepd.model.specs.range.mixins.access_flooring_mixin import AccessFlooringRangeMixin
 from openepd.model.validation.quantity import (
-    AmountRangeForce,
     AmountRangeGWP,
     AmountRangeLengthMm,
-    AmountRangePressureMpa,
     AmountRangeRFactor,
     AmountRangeYarnWeight,
 )
 
 
-class AccessFlooringRangeV1(BaseOpenEpdHierarchicalSpec):
+class AccessFlooringRangeV1(BaseOpenEpdHierarchicalSpec, AccessFlooringRangeMixin):
     """
     Elevated floor system built on top of concrete slab surface.
 
@@ -98,22 +93,6 @@ class AccessFlooringRangeV1(BaseOpenEpdHierarchicalSpec):
 
     _EXT_VERSION = "1.0"
 
-    core_material: list[AccessFlooringCoreMaterial] | None = pyd.Field(default=None, description="")
-    finish_material: list[AccessFlooringFinishMaterial] | None = pyd.Field(default=None, description="")
-    stringers: list[AccessFlooringStringers] | None = pyd.Field(default=None, description="")
-    seismic_rating: list[AccessFlooringSeismicRating] | None = pyd.Field(default=None, description="")
-    magnetically_attached_finish: bool | None = pyd.Field(default=None, description="")
-    permanent_finish: bool | None = pyd.Field(default=None, description="")
-    drylay: bool | None = pyd.Field(default=None, description="")
-    adjustable_height: bool | None = pyd.Field(default=None, description="")
-    fixed_height: bool | None = pyd.Field(default=None, description="")
-    finished_floor_height: AmountRangeLengthMm | None = pyd.Field(default=None, description="")
-    panel_thickness: AmountRangeLengthMm | None = pyd.Field(default=None, description="")
-    concentrated_load: AmountRangePressureMpa | None = pyd.Field(default=None, description="")
-    uniform_load: AmountRangePressureMpa | None = pyd.Field(default=None, description="")
-    rolling_load_10_pass: AmountRangeForce | None = pyd.Field(default=None, description="")
-    rolling_load_10000_pass: AmountRangeForce | None = pyd.Field(default=None, description="")
-
 
 class CarpetRangeV1(BaseOpenEpdHierarchicalSpec):
     """

openepd/model/specs/range/manufacturing_inputs.py

@@ -44,6 +44,7 @@ from openepd.model.specs.enums import (
     MasonryCementAstmC91Type,
     TextilesFabricType,
 )
+from openepd.model.specs.range.mixins.access_flooring_mixin import AccessFlooringRangeMixin
 
 
 class CementRangeV1(BaseOpenEpdHierarchicalSpec):
@@ -170,6 +171,16 @@ class TextilesRangeV1(BaseOpenEpdHierarchicalSpec):
     fabric_type: list[TextilesFabricType] | None = pyd.Field(default=None, description="")
 
 
+class AccessFlooringPanelsRangeV1(BaseOpenEpdHierarchicalSpec, AccessFlooringRangeMixin):
+    """
+    Part of an access floor system.
+
+    Panels are laid on top of an access floor pedestal, creating a finish floor.
+    """
+
+    _EXT_VERSION = "1.0"
+
+
 class ManufacturingInputsRangeV1(BaseOpenEpdHierarchicalSpec):
     """
     Manufacturing inputs.
@@ -180,7 +191,7 @@ class ManufacturingInputsRangeV1(BaseOpenEpdHierarchicalSpec):
     Range version.
     """
 
-    _EXT_VERSION = "1.0"
+    _EXT_VERSION = "1.1"
 
     AccessFlooringPedestals: AccessFlooringPedestalsRangeV1 | None = None
     CarpetBacking: CarpetBackingRangeV1 | None = None
@@ -188,3 +199,4 @@ class ManufacturingInputsRangeV1(BaseOpenEpdHierarchicalSpec):
     CementitiousMaterials: CementitiousMaterialsRangeV1 | None = None
     ConcreteAdmixtures: ConcreteAdmixturesRangeV1 | None = None
     Textiles: TextilesRangeV1 | None = None
+    AccessFlooringPanels: AccessFlooringPanelsRangeV1 | None = None

openepd/model/specs/range/mixins/__init__.py

@@ -0,0 +1,15 @@
+#
+#  Copyright 2025 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#

openepd/model/specs/range/mixins/access_flooring_mixin.py

@@ -0,0 +1,42 @@
+#
+#  Copyright 2025 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+from openepd.compat.pydantic import pyd
+from openepd.model.specs.base import BaseOpenEpdSpec
+from openepd.model.specs.enums import (
+    AccessFlooringCoreMaterial,
+    AccessFlooringFinishMaterial,
+    AccessFlooringSeismicRating,
+    AccessFlooringStringers,
+)
+from openepd.model.validation.quantity import AmountRangeForce, AmountRangeLengthMm, AmountRangePressureMpa
+
+
+class AccessFlooringRangeMixin(BaseOpenEpdSpec):
+    core_material: list[AccessFlooringCoreMaterial] | None = pyd.Field(default=None, description="")
+    finish_material: list[AccessFlooringFinishMaterial] | None = pyd.Field(default=None, description="")
+    stringers: list[AccessFlooringStringers] | None = pyd.Field(default=None, description="")
+    seismic_rating: list[AccessFlooringSeismicRating] | None = pyd.Field(default=None, description="")
+    magnetically_attached_finish: bool | None = pyd.Field(default=None, description="")
+    permanent_finish: bool | None = pyd.Field(default=None, description="")
+    drylay: bool | None = pyd.Field(default=None, description="")
+    adjustable_height: bool | None = pyd.Field(default=None, description="")
+    fixed_height: bool | None = pyd.Field(default=None, description="")
+    finished_floor_height: AmountRangeLengthMm | None = pyd.Field(default=None, description="")
+    panel_thickness: AmountRangeLengthMm | None = pyd.Field(default=None, description="")
+    concentrated_load: AmountRangePressureMpa | None = pyd.Field(default=None, description="")
+    uniform_load: AmountRangePressureMpa | None = pyd.Field(default=None, description="")
+    rolling_load_10_pass: AmountRangeForce | None = pyd.Field(default=None, description="")
+    rolling_load_10000_pass: AmountRangeForce | None = pyd.Field(default=None, description="")

openepd/model/specs/singular/finishes.py

@@ -16,10 +16,6 @@
 from openepd.compat.pydantic import pyd
 from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 from openepd.model.specs.enums import (
-    AccessFlooringCoreMaterial,
-    AccessFlooringFinishMaterial,
-    AccessFlooringSeismicRating,
-    AccessFlooringStringers,
     AllFabrication,
     CarpetFormFactor,
     CarpetIntendedApplication,
@@ -43,14 +39,13 @@ from openepd.model.specs.enums import (
     WoodFlooringTimberSpecies,
 )
 from openepd.model.specs.singular.common import HasForestPracticesCertifiers
+from openepd.model.specs.singular.mixins.access_flooring_mixin import AccessFlooringMixin
 from openepd.model.validation.numbers import RatioFloat
 from openepd.model.validation.quantity import (
     AreaPerVolumeStr,
-    ForceNStr,
     GwpKgCo2eStr,
     LengthMmStr,
     LengthMStr,
-    PressureMPaStr,
     RFactorStr,
     YarnWeightStr,
     validate_quantity_ge_factory,
@@ -59,7 +54,7 @@ from openepd.model.validation.quantity import (
 )
 
 
-class AccessFlooringV1(BaseOpenEpdHierarchicalSpec):
+class AccessFlooringV1(BaseOpenEpdHierarchicalSpec, AccessFlooringMixin):
     """
     Elevated floor system built on top of concrete slab surface.
 
@@ -69,30 +64,6 @@ class AccessFlooringV1(BaseOpenEpdHierarchicalSpec):
 
     _EXT_VERSION = "1.0"
 
-    # Own fields:
-    core_material: AccessFlooringCoreMaterial | None = pyd.Field(default=None, description="", example="Cementitious")
-    finish_material: AccessFlooringFinishMaterial | None = pyd.Field(default=None, description="", example="Linoleum")
-    stringers: AccessFlooringStringers | None = pyd.Field(default=None, description="", example="Standard")
-    seismic_rating: AccessFlooringSeismicRating | None = pyd.Field(default=None, description="", example="Type 0")
-    magnetically_attached_finish: bool | None = pyd.Field(default=None, description="", example=True)
-    permanent_finish: bool | None = pyd.Field(default=None, description="", example=True)
-    drylay: bool | None = pyd.Field(default=None, description="", example=True)
-    adjustable_height: bool | None = pyd.Field(default=None, description="", example=True)
-    fixed_height: bool | None = pyd.Field(default=None, description="", example=True)
-    finished_floor_height: LengthMmStr | None = pyd.Field(default=None, description="", example="1 m")
-    panel_thickness: LengthMmStr | None = pyd.Field(default=None, description="", example="1 m")
-    concentrated_load: PressureMPaStr | None = pyd.Field(default=None, description="", example="1 MPa")
-    uniform_load: PressureMPaStr | None = pyd.Field(default=None, description="", example="1 MPa")
-    rolling_load_10_pass: ForceNStr | None = pyd.Field(default=None, description="", example="1 N")
-    rolling_load_10000_pass: ForceNStr | None = pyd.Field(default=None, description="", example="1 N")
-
-    _access_flooring_rolling_load_10_pass_is_quantity_validator = pyd.validator(
-        "rolling_load_10_pass", allow_reuse=True
-    )(validate_quantity_unit_factory("N"))
-    _access_flooring_rolling_load_10000_pass_is_quantity_validator = pyd.validator(
-        "rolling_load_10000_pass", allow_reuse=True
-    )(validate_quantity_unit_factory("N"))
-
 
 class CarpetV1(BaseOpenEpdHierarchicalSpec):
     """Textile Floor Coverings."""

openepd/model/specs/singular/manufacturing_inputs.py

@@ -27,6 +27,7 @@ from openepd.model.specs.enums import (
     MasonryCementAstmC91Type,
     TextilesFabricType,
 )
+from openepd.model.specs.singular.mixins.access_flooring_mixin import AccessFlooringMixin
 
 
 class CementV1(BaseOpenEpdHierarchicalSpec):
@@ -132,6 +133,16 @@ class TextilesV1(BaseOpenEpdHierarchicalSpec):
     fabric_type: list[TextilesFabricType] | None = pyd.Field(default=None, description="", example=["Leather"])
 
 
+class AccessFlooringPanelsV1(BaseOpenEpdHierarchicalSpec, AccessFlooringMixin):
+    """
+    Part of an access floor system.
+
+    Panels are laid on top of an access floor pedestal, creating a finish floor.
+    """
+
+    _EXT_VERSION = "1.0"
+
+
 class ManufacturingInputsV1(BaseOpenEpdHierarchicalSpec):
     """
     Manufacturing inputs.
@@ -140,7 +151,7 @@ class ManufacturingInputsV1(BaseOpenEpdHierarchicalSpec):
     a construction.
     """
 
-    _EXT_VERSION = "1.0"
+    _EXT_VERSION = "1.1"
 
     # Nested specs:
     AccessFlooringPedestals: AccessFlooringPedestalsV1 | None = None
@@ -149,3 +160,4 @@ class ManufacturingInputsV1(BaseOpenEpdHierarchicalSpec):
     CementitiousMaterials: CementitiousMaterialsV1 | None = None
     ConcreteAdmixtures: ConcreteAdmixturesV1 | None = None
     Textiles: TextilesV1 | None = None
+    AccessFlooringPanels: AccessFlooringPanelsV1 | None = None

openepd/model/specs/singular/mixins/access_flooring_mixin.py

@@ -0,0 +1,49 @@
+#
+#  Copyright 2025 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+from openepd.compat.pydantic import pyd
+from openepd.model.specs.base import BaseOpenEpdSpec
+from openepd.model.specs.enums import (
+    AccessFlooringCoreMaterial,
+    AccessFlooringFinishMaterial,
+    AccessFlooringSeismicRating,
+    AccessFlooringStringers,
+)
+from openepd.model.validation.quantity import ForceNStr, LengthMmStr, PressureMPaStr, validate_quantity_unit_factory
+
+
+class AccessFlooringMixin(BaseOpenEpdSpec):
+    core_material: AccessFlooringCoreMaterial | None = pyd.Field(default=None, description="", example="Cementitious")
+    finish_material: AccessFlooringFinishMaterial | None = pyd.Field(default=None, description="", example="Linoleum")
+    stringers: AccessFlooringStringers | None = pyd.Field(default=None, description="", example="Standard")
+    seismic_rating: AccessFlooringSeismicRating | None = pyd.Field(default=None, description="", example="Type 0")
+    magnetically_attached_finish: bool | None = pyd.Field(default=None, description="", example=True)
+    permanent_finish: bool | None = pyd.Field(default=None, description="", example=True)
+    drylay: bool | None = pyd.Field(default=None, description="", example=True)
+    adjustable_height: bool | None = pyd.Field(default=None, description="", example=True)
+    fixed_height: bool | None = pyd.Field(default=None, description="", example=True)
+    finished_floor_height: LengthMmStr | None = pyd.Field(default=None, description="", example="1 m")
+    panel_thickness: LengthMmStr | None = pyd.Field(default=None, description="", example="1 m")
+    concentrated_load: PressureMPaStr | None = pyd.Field(default=None, description="", example="1 MPa")
+    uniform_load: PressureMPaStr | None = pyd.Field(default=None, description="", example="1 MPa")
+    rolling_load_10_pass: ForceNStr | None = pyd.Field(default=None, description="", example="1 N")
+    rolling_load_10000_pass: ForceNStr | None = pyd.Field(default=None, description="", example="1 N")
+
+    _access_flooring_rolling_load_10_pass_is_quantity_validator = pyd.validator(
+        "rolling_load_10_pass", allow_reuse=True
+    )(validate_quantity_unit_factory("N"))
+    _access_flooring_rolling_load_10000_pass_is_quantity_validator = pyd.validator(
+        "rolling_load_10000_pass", allow_reuse=True
+    )(validate_quantity_unit_factory("N"))

{openepd-6.17.0.dist-info → openepd-6.18.0.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.3
 Name: openepd
-Version: 6.17.0
+Version: 6.18.0
 Summary: Python library to work with OpenEPD format
 License: Apache-2.0
 Author: C-Change Labs

{openepd-6.17.0.dist-info → openepd-6.18.0.dist-info}/RECORD

@@ -1,5 +1,5 @@
 openepd/__init__.py,sha256=fhxfEyEurLvSfvQci-vb3njzl_lvhcLXiZrecCOaMU8,794
-openepd/__version__.py,sha256=pw3U9DES_3Of-AMo_2ZvETeB0EokgmJXb6lSw7mmaNQ,639
+openepd/__version__.py,sha256=Nax6JWlEOZo8C77Zc0b6oQhFqjhMuCqe9NH96tOeN-M,639
 openepd/api/__init__.py,sha256=9THJcV3LT7JDBOMz1px-QFf_sdJ0LOqJ5dmA9Dvvtd4,620
 openepd/api/average_dataset/__init__.py,sha256=9THJcV3LT7JDBOMz1px-QFf_sdJ0LOqJ5dmA9Dvvtd4,620
 openepd/api/average_dataset/generic_estimate_sync_api.py,sha256=_eZt_jGVL1a3p9cr-EF39Ve9Vl5sB8zwzTc_slnRL50,7975
@@ -54,7 +54,7 @@ openepd/model/specs/asphalt.py,sha256=eHhcITbBrNYR5N6x4Q2BxpsR64BR9OkjJ4bvPRYOqM
 openepd/model/specs/base.py,sha256=10IDyRFKQgFnyIPSqpeayP8Og1BDgs1EepXX5dyCMM4,2674
 openepd/model/specs/concrete.py,sha256=D9jbhZDtTXNBoAgljQBPxsmGsMvLSIAP5H53ZYiXcGI,5336
 openepd/model/specs/enums.py,sha256=tX26ZSV1yWPSJMjmo_JRQI2_wJhXJ8XD4nJjRB26rpw,63049
-openepd/model/specs/range/__init__.py,sha256=9gFsBsdqxcGHgi1_BF9vQaRnjY9WyN_6uYsSKnhojBs,4526
+openepd/model/specs/range/__init__.py,sha256=nV5ODdlIF2o0JZzIkgmzjo5_B3GNqKYEL_FWjyFvM8Y,4536
 openepd/model/specs/range/accessories.py,sha256=hZYz8mvAqrfLFiOIZ9qQZ59zmEiu0xE61Ko9cQ7NSKU,2498
 openepd/model/specs/range/aggregates.py,sha256=udVbsYc1Lyrd6a4YZBGNDQ3sBi-L3WLub_e1ecq7U-Q,2549
 openepd/model/specs/range/aluminium.py,sha256=Z3laZKXoPtfmOLLr4c4uf7Z-8TNmfz51X-_yd7GQIj8,2745
@@ -68,16 +68,18 @@ openepd/model/specs/range/conveying_equipment.py,sha256=_rqJ9Y3kkP8E6-vkZb6Pih3J
 openepd/model/specs/range/electrical.py,sha256=EI8pv9SN4lJbFNz1wlyMNAjkA0dsi84pc2J9YvtiwzY,11860
 openepd/model/specs/range/electrical_transmission_and_distribution_equipment.py,sha256=xDdyLj6oJRmdybq7W91MtgE80FDpaG6ii5hE921aRGQ,2525
 openepd/model/specs/range/electricity.py,sha256=yn_S25C_tZqseb8hiJ1yiHszu2mQ49FOFWWCqNpOBY0,997
-openepd/model/specs/range/exterior_improvements.py,sha256=N-fAjuVVt8ZGBcBhjBU9p82mpiKlpOah_EwNmHtDoBE,1721
-openepd/model/specs/range/finishes.py,sha256=ZvP_AShojfM_aTgFdBfjaxGfMHGZQ1PBdpfJshRYVX4,21188
+openepd/model/specs/range/exterior_improvements.py,sha256=dcgX9Tv4U_Zki9nGcy6ykvyesDYAtS_CuD-7nf17kMQ,1736
+openepd/model/specs/range/finishes.py,sha256=hAqnEzfSPeLS_Wq_ZiIn_k8OdivCvSCgxHAcNldqdXs,19787
 openepd/model/specs/range/fire_and_smoke_protection.py,sha256=GUap2Xrn-rFF8CMDyRcOpmQpO8JgZ7PSUXGr_SKUzws,3337
 openepd/model/specs/range/furnishings.py,sha256=_HdPg1_LepLgdo5tV59oRer1PRYniIM0kLEKbnlyoLM,6703
 openepd/model/specs/range/grouting.py,sha256=BQPxH6BvlXpdhLEZBui9zTuY93K_9syjoa6rdnF8GGY,1095
-openepd/model/specs/range/manufacturing_inputs.py,sha256=RFqWTQij2Zc5-Y4jzOBQKC0ENV3ncg5O9yHoqdo9rUQ,5574
+openepd/model/specs/range/manufacturing_inputs.py,sha256=9KiSZC7uR2nF9pi4UjZ7XfGVhrsix_mU4HlJwj_MSVI,5986
 openepd/model/specs/range/masonry.py,sha256=P9USz744YQLBEk_XdG4v9a4ImXtMymnPC30qtbd2F6I,2867
 openepd/model/specs/range/material_handling.py,sha256=9jxRHpjMKu71B5omH55UjkNVJvaTLgTMtEidSKPFn5c,1483
 openepd/model/specs/range/mechanical.py,sha256=kyAJj9KJ17usuKDOt7v2gAJpzSEeYO9nnTOB_pht-fc,10267
 openepd/model/specs/range/mechanical_insulation.py,sha256=S2-NkFVkjLmn_dk3gsG8C2YcV0SFXbOCgY6LKberqh8,1737
+openepd/model/specs/range/mixins/__init__.py,sha256=9THJcV3LT7JDBOMz1px-QFf_sdJ0LOqJ5dmA9Dvvtd4,620
+openepd/model/specs/range/mixins/access_flooring_mixin.py,sha256=JEcvlmKv3R5dVIM4X4ILH43WlMwF6FnZ4-_s2qU-MIM,2382
 openepd/model/specs/range/network_infrastructure.py,sha256=aqXEIGqFy0gNCM_ftd3J6aT3FZf9JlT0SBOImhdkTg0,8498
 openepd/model/specs/range/openings.py,sha256=4n5PEMJJFL75wMmYUcJNxdWtDMpWYZLKK4d-730KASA,15451
 openepd/model/specs/range/other_electrical_equipment.py,sha256=H4tZHcHyR2uUYHn-bQfLC6hR4tynVp_7EJbiI-YpK7Y,1001
@@ -109,16 +111,17 @@ openepd/model/specs/singular/electrical.py,sha256=BiaPpZBGBzUt5wVacd1tOIZ9dRn9ZA
 openepd/model/specs/singular/electrical_transmission_and_distribution_equipment.py,sha256=oZYyHgnXn9RH3YzltUEDiiQKrin2mvMlTgC3OhxV7DY,1978
 openepd/model/specs/singular/electricity.py,sha256=f1cJ9eklNUf97khCIZiT5-z8V_TbOcvH2me_1UTQVrE,823
 openepd/model/specs/singular/exterior_improvements.py,sha256=tf9lHxb5Mj9Sf3WGjR1wq-mKcyqlvvVKpZG2W6cLcxo,1711
-openepd/model/specs/singular/finishes.py,sha256=Pg6eb3-NFB45hhGltNjW_7SGeujcE882CZX7P8X8FMk,22571
+openepd/model/specs/singular/finishes.py,sha256=vAN6p9eA8ysdrJ0gAD7xteuKpURmGTruVskXh17N8-E,20631
 openepd/model/specs/singular/fire_and_smoke_protection.py,sha256=1uyEGdMAsboYORHvSFN1wftRVAps_UJ1Ep3Dk9arT3s,3058
 openepd/model/specs/singular/furnishings.py,sha256=4bReWm8FSWHRyq6vmjPm7ZixFIau7J8JF1gtZq6_jVA,5732
 openepd/model/specs/singular/grouting.py,sha256=pg2tX3W7a2TQ3z_eyFYGlBJY3WEwn6JlZyqM3PQIJcU,934
-openepd/model/specs/singular/manufacturing_inputs.py,sha256=9WSDOVN0mUqvFXqWf82lkpHi-XRQSMcEpe9bweegwhU,5093
+openepd/model/specs/singular/manufacturing_inputs.py,sha256=pUnd7oo20w8h1C0Jo-t1m2uayOYtlXJyuV26gVfkhlU,5488
 openepd/model/specs/singular/masonry.py,sha256=f6nph-gscAmVeJ60bG-ebto5kz0fgh0LY27n0VutGFA,3165
 openepd/model/specs/singular/material_handling.py,sha256=iEeUx1hNKla669y0zl-QAJn6xA7ceq75aRG8qT0p56Q,1274
 openepd/model/specs/singular/mechanical.py,sha256=VvW9PQ3VI8GCaqu5MKUmxjmcaHkKDAHAIhLyK-DVlUw,9862
 openepd/model/specs/singular/mechanical_insulation.py,sha256=h-Ir-jiLF-cpiHap4wx5G4fpvsRRKzqcGVXb5U5aqvQ,1607
 openepd/model/specs/singular/mixins/__init__.py,sha256=9THJcV3LT7JDBOMz1px-QFf_sdJ0LOqJ5dmA9Dvvtd4,620
+openepd/model/specs/singular/mixins/access_flooring_mixin.py,sha256=z_e5TYK2dtRMz--GrWQDkyyDEM0DmERZZO9V-EzAs1o,2915
 openepd/model/specs/singular/mixins/conduit_mixin.py,sha256=tj6p-MF84rg4LGxXPC65uMvmn6NlxmATuloe4TcuQdk,1928
 openepd/model/specs/singular/network_infrastructure.py,sha256=eB3p1zu1u15Ly5iuyyJ4xl3Z1GuBCRVU18Wpz8FWZrg,8521
 openepd/model/specs/singular/openings.py,sha256=UbdojHW3yxV9DdWECgyANKicdH5czz6pyFPKpzzLxmw,18941
@@ -141,7 +144,7 @@ openepd/model/validation/quantity.py,sha256=mP4gIkeOGZuHRhprsf_BX11Cic75NssYxOTk
 openepd/model/versioning.py,sha256=wBZdOVL3ND9FMIRU9PS3vx9M_7MBiO70xYPQvPez6po,4522
 openepd/patch_pydantic.py,sha256=bO7U5HqthFol0vfycb0a42UAGL3KOQ8-9MW4yCWOFP0,4150
 openepd/py.typed,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
-openepd-6.17.0.dist-info/LICENSE,sha256=xx0jnfkXJvxRnG63LTGOxlggYnIysveWIZ6H3PNdCrQ,11357
-openepd-6.17.0.dist-info/METADATA,sha256=-BVTS9w6zrEhvgm_yiewWbqEctGCErxZBqz_hQGVbHA,9067
-openepd-6.17.0.dist-info/WHEEL,sha256=b4K_helf-jlQoXBBETfwnf4B04YC67LOev0jo4fX5m8,88
-openepd-6.17.0.dist-info/RECORD,,
+openepd-6.18.0.dist-info/LICENSE,sha256=xx0jnfkXJvxRnG63LTGOxlggYnIysveWIZ6H3PNdCrQ,11357
+openepd-6.18.0.dist-info/METADATA,sha256=KbKTmRSBbq8LSANcUMXpAmBMIxjhstZUdafIKBKFXUU,9067
+openepd-6.18.0.dist-info/WHEEL,sha256=b4K_helf-jlQoXBBETfwnf4B04YC67LOev0jo4fX5m8,88
+openepd-6.18.0.dist-info/RECORD,,