openepd 3.1.4__py3-none-any.whl → 3.3.0__py3-none-any.whl

openepd/__version__.py

@@ -17,4 +17,4 @@
 #  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
 #  Find out more at www.BuildingTransparency.org
 #
-VERSION = "3.1.4"
+VERSION = "3.3.0"

openepd/model/specs/generated/__init__.py

@@ -0,0 +1,19 @@
+#
+#  Copyright 2024 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  This software was developed with support from the Skanska USA,
+#  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
+#  Find out more at www.BuildingTransparency.org
+#

openepd/model/specs/generated/accessories.py

@@ -21,37 +21,42 @@ from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 
 
 class BlanketFacingV1(BaseOpenEpdHierarchicalSpec):
-    """Blanket facing performance specification."""
+    """
+    Facing materials for insulation products.
+
+    Such as kraft, white vinyl sheeting, or aluminum foil, which can serve as air barrier, vapor barrier, radiant
+    barrier, or flame resistive layer.
+    """
 
     _EXT_VERSION = "1.0"
 
 
 class DoorsHardwareV1(BaseOpenEpdHierarchicalSpec):
-    """Doors hardware performance specification."""
+    """Door hardware, including automatic and security door hardware."""
 
     _EXT_VERSION = "1.0"
 
 
 class FlooringAccessoriesV1(BaseOpenEpdHierarchicalSpec):
-    """Flooring accessories performance specification."""
+    """Products used in flooring, other than the actual flooring product itself."""
 
     _EXT_VERSION = "1.0"
 
 
 class MortarV1(BaseOpenEpdHierarchicalSpec):
-    """Mortar performance specification."""
+    """Cementitious paste used to bind building blocks such as stones, bricks, and concrete masonry."""
 
     _EXT_VERSION = "1.0"
 
 
 class TileGroutV1(BaseOpenEpdHierarchicalSpec):
-    """Tile grout performance specification."""
+    """Water-cement-sand mixture for laying ceramic tile."""
 
     _EXT_VERSION = "1.0"
 
 
 class AccessoriesV1(BaseOpenEpdHierarchicalSpec):
-    """Accessories performance specification."""
+    """Materials that are used alongside other materials."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/aluminium.py

@@ -23,13 +23,16 @@ from openepd.model.specs.generated.enums import AluminiumAlloy
 
 
 class AluminiumBilletsV1(BaseOpenEpdHierarchicalSpec):
-    """Aluminium billets performance specification."""
+    """Cast Aluminium ingots or billets for use in manufacturing more finished products."""
 
     _EXT_VERSION = "1.0"
 
 
 class AluminiumExtrusionsV1(BaseOpenEpdHierarchicalSpec):
-    """Aluminium extrusions performance specification."""
+    """Extruded aluminum products used in construction.
+
+    Includes range of finish options including mill finish, painted, and anodized.
+    """
 
     _EXT_VERSION = "1.0"
 
@@ -38,19 +41,19 @@ class AluminiumExtrusionsV1(BaseOpenEpdHierarchicalSpec):
 
 
 class AluminiumSheetGoodsV1(BaseOpenEpdHierarchicalSpec):
-    """Aluminium sheet goods performance specification."""
+    """Rolled and/or Stamped Aluminium coil or sheets, often used in flashing, trim, panels, and deck."""
 
     _EXT_VERSION = "1.0"
 
 
 class AluminiumSuspensionAssemblyV1(BaseOpenEpdHierarchicalSpec):
-    """Aluminium suspension assembly performance specification."""
+    """Aluminum suspension assemblies for acoustical ceiling systems."""
 
     _EXT_VERSION = "1.0"
 
 
 class AluminiumV1(BaseOpenEpdHierarchicalSpec):
-    """Material definition for objects made primarily from Aluminium and its alloys."""
+    """Broad category for construction materials made primarily from Aluminium and its alloys."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/asphalt.py

@@ -25,7 +25,7 @@ from openepd.model.validation.quantity import LengthMmStr, TemperatureCStr
 
 
 class AsphaltV1(BaseOpenEpdHierarchicalSpec):
-    """Asphalt performance specification."""
+    """General category for asphalt mixtures."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/bulk_materials.py

@@ -21,6 +21,6 @@ from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 
 
 class BulkMaterialsV1(BaseOpenEpdHierarchicalSpec):
-    """Bulk materials performance specification."""
+    """A generic category for materials whose declared unit is mass and which are not in another category."""
 
     _EXT_VERSION = "1.0"

openepd/model/specs/generated/cast_decks_and_underlayment.py

@@ -21,6 +21,11 @@ from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 
 
 class CastDecksAndUnderlaymentV1(BaseOpenEpdHierarchicalSpec):
-    """Cast decks and underlayment performance specification."""
+    """
+    Cast roof deck substrate systems.
+
+    Typically made of gyspum concrete or cementitious wood fiber, that provide structural support to
+    roofing materials.
+    """
 
     _EXT_VERSION = "1.0"

openepd/model/specs/generated/cladding.py

@@ -24,31 +24,31 @@ from openepd.model.validation.quantity import LengthMmStr, LengthMStr, RValueStr
 
 
 class AluminiumSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Aluminium siding performance specification."""
+    """Exterior siding product made primarily from aluminium."""
 
     _EXT_VERSION = "1.0"
 
 
 class SteelSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Steel siding performance specification."""
+    """Exterior siding product made primarily from steel."""
 
     _EXT_VERSION = "1.0"
 
 
 class ZincSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Zinc siding performance specification."""
+    """Exterior siding product made primarily from zinc."""
 
     _EXT_VERSION = "1.0"
 
 
 class ShingleAndShakeSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Shingle and shake siding performance specification."""
+    """Shingle & shake siding."""
 
     _EXT_VERSION = "1.0"
 
 
 class MetalSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Metal siding performance specification."""
+    """Exterior siding product made of metal such as steel, aluminum, etc."""
 
     _EXT_VERSION = "1.0"
 
@@ -59,19 +59,19 @@ class MetalSidingV1(BaseOpenEpdHierarchicalSpec):
 
 
 class CompositionSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Composition siding performance specification."""
+    """Composite wood siding composed of wood wafers and resin."""
 
     _EXT_VERSION = "1.0"
 
 
 class FiberCementSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Fiber cement siding performance specification."""
+    """Composite siding product made of cement and cellulose fibers."""
 
     _EXT_VERSION = "1.0"
 
 
 class InsulatedVinylSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Insulated vinyl siding performance specification."""
+    """Vinyl cladding product integrated with manufacturer-installed insulation."""
 
     _EXT_VERSION = "1.0"
 
@@ -84,19 +84,19 @@ class InsulatedVinylSidingV1(BaseOpenEpdHierarchicalSpec):
 
 
 class PlywoodSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Plywood siding performance specification."""
+    """Siding made of plywood boards."""
 
     _EXT_VERSION = "1.0"
 
 
 class PolypropyleneSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Polypropylene siding performance specification."""
+    """Exterior wall cladding made from polypropylene, which may contain fillers or reinforcements."""
 
     _EXT_VERSION = "1.0"
 
 
 class SolidWoodSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Solid wood siding performance specification."""
+    """Siding products made of wood including shingle & shake siding."""
 
     _EXT_VERSION = "1.0"
 
@@ -105,7 +105,7 @@ class SolidWoodSidingV1(BaseOpenEpdHierarchicalSpec):
 
 
 class VinylSidingV1(BaseOpenEpdHierarchicalSpec):
-    """Vinyl siding performance specification."""
+    """Exterior wall cladding made principally from rigid polyvinyl chloride (PVC)."""
 
     _EXT_VERSION = "1.0"
 
@@ -118,7 +118,11 @@ class VinylSidingV1(BaseOpenEpdHierarchicalSpec):
 
 
 class SidingV1(BaseOpenEpdHierarchicalSpec):
-    """Siding performance specification."""
+    """
+    Long narrow products for exterior wall face of building.
+
+    Typically made of, e.g., metal, solid wood, plywood, plastic, composition, fiber cement, etc.
+    """
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/cmu.py

@@ -24,7 +24,7 @@ from openepd.model.validation.quantity import GwpKgCo2eStr, PressureMPaStr
 
 
 class CMUV1(BaseOpenEpdHierarchicalSpec):
-    """CMU performance specification."""
+    """Pre-manufactured concrete masonry blocks."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/conveying_equipment.py

@@ -24,7 +24,7 @@ from openepd.model.validation.quantity import LengthMStr, MassKgStr, SpeedStr
 
 
 class ElevatorsV1(BaseOpenEpdHierarchicalSpec):
-    """Elevators performance specification."""
+    """Car that moves in a vertical shaft to carry passengers or freight between the levels of a multistory building."""
 
     _EXT_VERSION = "1.0"
 
@@ -39,7 +39,7 @@ class ElevatorsV1(BaseOpenEpdHierarchicalSpec):
 
 
 class ConveyingEquipmentV1(BaseOpenEpdHierarchicalSpec):
-    """Conveying equipment performance specification."""
+    """Conveying Equipment."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/electrical.py

@@ -34,19 +34,19 @@ from openepd.model.validation.quantity import (
 
 
 class LowVoltBusesV1(BaseOpenEpdHierarchicalSpec):
-    """Low volt buses performance specification."""
+    """Busbars and Busways of 600V or less."""
 
     _EXT_VERSION = "1.0"
 
 
 class MedVoltBusesV1(BaseOpenEpdHierarchicalSpec):
-    """Med volt buses performance specification."""
+    """Busbars and Busways over 600V."""
 
     _EXT_VERSION = "1.0"
 
 
 class BatteriesV1(BaseOpenEpdHierarchicalSpec):
-    """Batteries performance specification."""
+    """Battery equipment, including central batteries, battery charging, and UPS."""
 
     _EXT_VERSION = "1.0"
 
@@ -58,7 +58,7 @@ class OtherElectricalPowerStorageV1(BaseOpenEpdHierarchicalSpec):
 
 
 class CableTraysV1(BaseOpenEpdHierarchicalSpec):
-    """Cable trays performance specification."""
+    """Mechanical support for electrial or communications cabling, typically suspended from a roof or wall."""
 
     _EXT_VERSION = "1.0"
 
@@ -74,7 +74,12 @@ class CableTraysV1(BaseOpenEpdHierarchicalSpec):
 
 
 class ElectricalBusesV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical buses performance specification."""
+    """
+    Power distribution, in the form of busbars or of insulted ducts made of copper or aluminum busbars.
+
+    It is an alternative means of conducting electricity compared toto power cables or cable bus. Also called
+    bus ducts.
+    """
 
     _EXT_VERSION = "1.0"
 
@@ -84,19 +89,19 @@ class ElectricalBusesV1(BaseOpenEpdHierarchicalSpec):
 
 
 class FloorEquipmentBoxesV1(BaseOpenEpdHierarchicalSpec):
-    """Floor equipment boxes performance specification."""
+    """Equipment boxes for power or electronic equipment embedded in an accessible floor."""
 
     _EXT_VERSION = "1.0"
 
 
 class PowerDistributionUnitsV1(BaseOpenEpdHierarchicalSpec):
-    """Power distribution units performance specification."""
+    """Switched electrical distribution units placed very close to the point of consumption, for example inside a rack of electronic equipment."""
 
     _EXT_VERSION = "1.0"
 
 
 class RacewaysV1(BaseOpenEpdHierarchicalSpec):
-    """Raceways performance specification."""
+    """Mechanical guideways for eletrical communications cabling, typically embedded in an accessible floor."""
 
     _EXT_VERSION = "1.0"
 
@@ -109,37 +114,37 @@ class RacewaysV1(BaseOpenEpdHierarchicalSpec):
 
 
 class FueledElectricalGeneratorsV1(BaseOpenEpdHierarchicalSpec):
-    """Fueled electrical generators performance specification."""
+    """Fueled electrical generators."""
 
     _EXT_VERSION = "1.0"
 
 
 class OtherGenerationV1(BaseOpenEpdHierarchicalSpec):
-    """Other generation performance specification."""
+    """Other generation."""
 
     _EXT_VERSION = "1.0"
 
 
 class PhotovoltaicsV1(BaseOpenEpdHierarchicalSpec):
-    """Photovoltaics performance specification."""
+    """Solar photovoltaics, rated on a nameplate capacity basis."""
 
     _EXT_VERSION = "1.0"
 
 
 class WindTurbinesV1(BaseOpenEpdHierarchicalSpec):
-    """Wind turbines performance specification."""
+    """Wind generators, rated on a nameplate capacity basis."""
 
     _EXT_VERSION = "1.0"
 
 
 class ElectricityFromPowerGridV1(BaseOpenEpdHierarchicalSpec):
-    """Electricity from power grid performance specification."""
+    """Electrical energy drawn from a specific utility grid."""
 
     _EXT_VERSION = "1.0"
 
 
 class ElectricityFromSpecificGeneratorV1(BaseOpenEpdHierarchicalSpec):
-    """Electricity from specific generator performance specification."""
+    """Electrical energy from a specific power plant, such as a wind farm using a specific type of turbine."""
 
     _EXT_VERSION = "1.0"
 
@@ -148,7 +153,11 @@ class ElectricityFromSpecificGeneratorV1(BaseOpenEpdHierarchicalSpec):
 
 
 class PowerPurchaseAgreementsV1(BaseOpenEpdHierarchicalSpec):
-    """Power purchase agreements performance specification."""
+    """
+    Electrical energy subject to a verified power purchase agreement.
+
+    The impact of electricity generation is allocated specifically to the agreement and not to the general grid.
+    """
 
     _EXT_VERSION = "1.0"
 
@@ -157,43 +166,43 @@ class PowerPurchaseAgreementsV1(BaseOpenEpdHierarchicalSpec):
 
 
 class LightbulbsV1(BaseOpenEpdHierarchicalSpec):
-    """Lightbulbs performance specification."""
+    """Various types of light bulbs, including LED, CFL, halogen, and incandescent."""
 
     _EXT_VERSION = "1.0"
 
 
 class LightingControlsV1(BaseOpenEpdHierarchicalSpec):
-    """Lighting controls performance specification."""
+    """Devices used to control the operation of lighting, including dimmers, sensors, and smart controls."""
 
     _EXT_VERSION = "1.0"
 
 
 class LightingFixturesV1(BaseOpenEpdHierarchicalSpec):
-    """Lighting fixtures performance specification."""
+    """Permanent lighting fixtures for interior spaces, including ceiling, wall-mounted, and pendant fixtures."""
 
     _EXT_VERSION = "1.0"
 
 
 class OutdoorLightingV1(BaseOpenEpdHierarchicalSpec):
-    """Outdoor lighting performance specification."""
+    """Lighting products designed for outdoor use, including landscape and security lighting."""
 
     _EXT_VERSION = "1.0"
 
 
 class SpecialtyLightingV1(BaseOpenEpdHierarchicalSpec):
-    """Specialty lighting performance specification."""
+    """Specialized lighting for niche applications like emergency, medical, or theatrical lighting."""
 
     _EXT_VERSION = "1.0"
 
 
 class TaskLightingV1(BaseOpenEpdHierarchicalSpec):
-    """Task lighting performance specification."""
+    """Lighting designed for specific tasks such as desk lamps, under-cabinet lighting, and reading lamps."""
 
     _EXT_VERSION = "1.0"
 
 
 class ElectricalPowerStorageV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical power storage performance specification."""
+    """Electrical Power Storage."""
 
     _EXT_VERSION = "1.0"
 
@@ -203,7 +212,7 @@ class ElectricalPowerStorageV1(BaseOpenEpdHierarchicalSpec):
 
 
 class LowVoltageElectricalDistributionV1(BaseOpenEpdHierarchicalSpec):
-    """Low voltage electrical distribution performance specification."""
+    """Low Voltage Electrical Distribution."""
 
     _EXT_VERSION = "1.0"
 
@@ -216,7 +225,11 @@ class LowVoltageElectricalDistributionV1(BaseOpenEpdHierarchicalSpec):
 
 
 class ElectricalGenerationEquipmentV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical generation equipment performance specification."""
+    """
+    Equipment for generating electrical power.
+
+    This category is primarily for smaller-scale. (e.g. on premises) generation, rather than utility-scale equipment.
+    """
 
     _EXT_VERSION = "1.0"
 
@@ -228,7 +241,7 @@ class ElectricalGenerationEquipmentV1(BaseOpenEpdHierarchicalSpec):
 
 
 class ElectricPowerV1(BaseOpenEpdHierarchicalSpec):
-    """Electric power performance specification."""
+    """Electrical energy drawn from a utility grid."""
 
     _EXT_VERSION = "1.0"
 
@@ -239,7 +252,7 @@ class ElectricPowerV1(BaseOpenEpdHierarchicalSpec):
 
 
 class LightingV1(BaseOpenEpdHierarchicalSpec):
-    """Lighting performance specification."""
+    """Lamps and lightbulbs and lamp components."""
 
     _EXT_VERSION = "1.0"
 
@@ -282,7 +295,7 @@ class LightingV1(BaseOpenEpdHierarchicalSpec):
 
 
 class ElectricalV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical performance specification."""
+    """Electric power and equipment."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/electrical_transmission_and_distribution_equipment.py

@@ -21,13 +21,13 @@ from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 
 
 class AcTransformersV1(BaseOpenEpdHierarchicalSpec):
-    """AC transformers performance specification."""
+    """Equipment for transforming between higher and lower voltage AC power."""
 
     _EXT_VERSION = "1.0"
 
 
 class ElectricalInsulatorsV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical insulators performance specification."""
+    """Passive electrical isolation."""
 
     _EXT_VERSION = "1.0"
 
@@ -39,19 +39,23 @@ class ElectricalSubstationsV1(BaseOpenEpdHierarchicalSpec):
 
 
 class ElectricalSwitchgearV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical switchgear performance specification."""
+    """
+    Equipment for interrupting and controlling high-power electrical flows.
+
+    Used for protection, isolation, or control of electrical equipment.
+    """
 
     _EXT_VERSION = "1.0"
 
 
 class PowerCablingV1(BaseOpenEpdHierarchicalSpec):
-    """Power cabling performance specification."""
+    """High-voltage electrical cabling."""
 
     _EXT_VERSION = "1.0"
 
 
 class ElectricalTransmissionAndDistributionEquipmentV1(BaseOpenEpdHierarchicalSpec):
-    """Electrical transmission and distribution equipment performance specification."""
+    """Electrical Transmission & Distribution Equipment."""
 
     _EXT_VERSION = "1.0"
 

openepd/model/specs/generated/electricity.py

@@ -21,6 +21,6 @@ from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
 
 
 class ElectricityV1(BaseOpenEpdHierarchicalSpec):
-    """Electricity performance specification."""
+    """Electrical equipment and components and supplies."""
 
     _EXT_VERSION = "1.0"

openepd/model/specs/generated/enums.py

@@ -201,6 +201,7 @@ class GypsumFireRating(StrEnum):
      - X: X
      - C: C
      - F: F
+     - Other: Not one of the listed options
 
     """
 
@@ -208,6 +209,7 @@ class GypsumFireRating(StrEnum):
     X = "X"
     C = "C"
     F = "F"
+    OTHER = "Other"
 
 
 class MembraneRoofingReinforcement(StrEnum):