openepd 2.0.0__py3-none-any.whl → 3.1.0__py3-none-any.whl

openepd/model/specs/generated/other_materials.py

@@ -0,0 +1,123 @@
+#
+#  Copyright 2024 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  This software was developed with support from the Skanska USA,
+#  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
+#  Find out more at www.BuildingTransparency.org
+#
+from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
+
+
+class AuxiliariesV1(BaseOpenEpdHierarchicalSpec):
+    """Auxiliaries performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class CleaningProductsV1(BaseOpenEpdHierarchicalSpec):
+    """Cleaning products performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class ClothingV1(BaseOpenEpdHierarchicalSpec):
+    """Clothing performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class FoodBeverageV1(BaseOpenEpdHierarchicalSpec):
+    """Food beverage performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class TransportationInfrastructureV1(BaseOpenEpdHierarchicalSpec):
+    """Transportation infrastructure performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    Auxiliaries: AuxiliariesV1 | None = None
+
+
+class UnsupportedV1(BaseOpenEpdHierarchicalSpec):
+    """Unsupported performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    CleaningProducts: CleaningProductsV1 | None = None
+    Clothing: ClothingV1 | None = None
+    FoodBeverage: FoodBeverageV1 | None = None
+
+
+class CopperV1(BaseOpenEpdHierarchicalSpec):
+    """Copper performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class EarthworkV1(BaseOpenEpdHierarchicalSpec):
+    """Earthwork performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class ExteriorSunControlDevicesV1(BaseOpenEpdHierarchicalSpec):
+    """Exterior sun control devices performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class GypsumFinishingCompoundsV1(BaseOpenEpdHierarchicalSpec):
+    """Plasters and the like for finishing Gypsum Sheet and Board."""
+
+    _EXT_VERSION = "1.0"
+
+
+class ProfilesV1(BaseOpenEpdHierarchicalSpec):
+    """Profiles performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class UnknownV1(BaseOpenEpdHierarchicalSpec):
+    """Unknown performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class ZincV1(BaseOpenEpdHierarchicalSpec):
+    """Zinc performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class OtherMaterialsV1(BaseOpenEpdHierarchicalSpec):
+    """Other materials performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    TransportationInfrastructure: TransportationInfrastructureV1 | None = None
+    Unsupported: UnsupportedV1 | None = None
+    Copper: CopperV1 | None = None
+    Earthwork: EarthworkV1 | None = None
+    ExteriorSunControlDevices: ExteriorSunControlDevicesV1 | None = None
+    GypsumFinishingCompounds: GypsumFinishingCompoundsV1 | None = None
+    Profiles: ProfilesV1 | None = None
+    Unknown: UnknownV1 | None = None
+    Zinc: ZincV1 | None = None

openepd/model/specs/generated/plumbing.py

@@ -0,0 +1,153 @@
+#
+#  Copyright 2024 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  This software was developed with support from the Skanska USA,
+#  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
+#  Find out more at www.BuildingTransparency.org
+#
+from openepd.compat.pydantic import pyd
+from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
+from openepd.model.specs.generated.enums import FireProtectionPipingMaterial, PipingAnsiSchedule, PlumbingPipingMaterial
+from openepd.model.validation.quantity import LengthMmStr, validate_unit_factory
+
+
+class BathtubsV1(BaseOpenEpdHierarchicalSpec):
+    """Bathtubs performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class FaucetsV1(BaseOpenEpdHierarchicalSpec):
+    """Faucets performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class OtherPlumbingFixturesV1(BaseOpenEpdHierarchicalSpec):
+    """Other plumbing fixtures performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class WaterClosetsV1(BaseOpenEpdHierarchicalSpec):
+    """Water closets performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class FireProtectionPipingV1(BaseOpenEpdHierarchicalSpec):
+    """Fire protection piping performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    thickness: LengthMmStr | None = pyd.Field(default=None, description="", example="6 mm")
+    piping_diameter: LengthMmStr | None = pyd.Field(default=None, description="", example="120 mm")
+    mass_per_unit_length: str | None = pyd.Field(default=None, description="", example="1 kg / m")
+    piping_ansi_schedule: PipingAnsiSchedule | None = pyd.Field(default=None, description="", example="5")
+    fire_protection_piping_material: FireProtectionPipingMaterial | None = pyd.Field(
+        default=None, description="", example="PVC"
+    )
+
+    _thickness_is_quantity_validator = pyd.validator("thickness", allow_reuse=True)(validate_unit_factory("m"))
+    _piping_diameter_is_quantity_validator = pyd.validator("piping_diameter", allow_reuse=True)(
+        validate_unit_factory("m")
+    )
+    _mass_per_unit_length_is_quantity_validator = pyd.validator("mass_per_unit_length", allow_reuse=True)(
+        validate_unit_factory("kg / m")
+    )
+
+
+class FireSprinklersV1(BaseOpenEpdHierarchicalSpec):
+    """Fire sprinklers performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class StorageTanksV1(BaseOpenEpdHierarchicalSpec):
+    """Storage tanks performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class WaterHeatersV1(BaseOpenEpdHierarchicalSpec):
+    """Water heaters performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class PlumbingFixturesV1(BaseOpenEpdHierarchicalSpec):
+    """Plumbing fixtures performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    Bathtubs: BathtubsV1 | None = None
+    Faucets: FaucetsV1 | None = None
+    OtherPlumbingFixtures: OtherPlumbingFixturesV1 | None = None
+    WaterClosets: WaterClosetsV1 | None = None
+
+
+class FireSuppressionV1(BaseOpenEpdHierarchicalSpec):
+    """Fire suppression performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    FireProtectionPiping: FireProtectionPipingV1 | None = None
+    FireSprinklers: FireSprinklersV1 | None = None
+
+
+class PipingV1(BaseOpenEpdHierarchicalSpec):
+    """Piping performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    thickness: LengthMmStr | None = pyd.Field(default=None, description="", example="6 mm")
+    piping_diameter: LengthMmStr | None = pyd.Field(default=None, description="", example="120 mm")
+    mass_per_unit_length: str | None = pyd.Field(default=None, description="", example="1 kg / m")
+    piping_ansi_schedule: PipingAnsiSchedule | None = pyd.Field(default=None, description="", example="5")
+    plumbing_piping_material: PlumbingPipingMaterial | None = pyd.Field(default=None, description="", example="PVC")
+
+    _thickness_is_quantity_validator = pyd.validator("thickness", allow_reuse=True)(validate_unit_factory("m"))
+    _piping_diameter_is_quantity_validator = pyd.validator("piping_diameter", allow_reuse=True)(
+        validate_unit_factory("m")
+    )
+    _mass_per_unit_length_is_quantity_validator = pyd.validator("mass_per_unit_length", allow_reuse=True)(
+        validate_unit_factory("kg / m")
+    )
+
+
+class PlumbingEquipmentV1(BaseOpenEpdHierarchicalSpec):
+    """Plumbing equipment performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    StorageTanks: StorageTanksV1 | None = None
+    WaterHeaters: WaterHeatersV1 | None = None
+
+
+class PlumbingV1(BaseOpenEpdHierarchicalSpec):
+    """Plumbing performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    PlumbingFixtures: PlumbingFixturesV1 | None = None
+    FireSuppression: FireSuppressionV1 | None = None
+    Piping: PipingV1 | None = None
+    PlumbingEquipment: PlumbingEquipmentV1 | None = None

openepd/model/specs/generated/precast_concrete.py

@@ -0,0 +1,68 @@
+#
+#  Copyright 2024 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  This software was developed with support from the Skanska USA,
+#  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
+#  Find out more at www.BuildingTransparency.org
+#
+from openepd.compat.pydantic import pyd
+from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
+from openepd.model.validation.numbers import RatioFloat
+from openepd.model.validation.quantity import PressureMPaStr, validate_unit_factory
+
+
+class ArchitecturalPrecastV1(BaseOpenEpdHierarchicalSpec):
+    """Architectural precast performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class StructuralPrecastV1(BaseOpenEpdHierarchicalSpec):
+    """Structural precast performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class UtilityUndergroundPrecastV1(BaseOpenEpdHierarchicalSpec):
+    """Utility underground precast performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class PrecastConcreteV1(BaseOpenEpdHierarchicalSpec):
+    """Precast concrete performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    lightweight: bool | None = pyd.Field(default=None, description="", example=True)
+    concrete_compressive_strength_28d: PressureMPaStr | None = pyd.Field(default=None, description="", example="1 MPa")
+    insulated: bool | None = pyd.Field(default=None, description="", example=True)
+    gfrc: bool | None = pyd.Field(
+        default=None,
+        description="Glass Fiber Reinforced Concrete is fiber-reinforced concrete sometimes used in "
+        "architectural panels",
+        example=True,
+    )
+    steel_mass_percentage: RatioFloat | None = pyd.Field(default=None, description="", example=0.5, ge=0, le=1)
+
+    _concrete_compressive_strength_28d_is_quantity_validator = pyd.validator(
+        "concrete_compressive_strength_28d", allow_reuse=True
+    )(validate_unit_factory("MPa"))
+
+    # Nested specs:
+    ArchitecturalPrecast: ArchitecturalPrecastV1 | None = None
+    StructuralPrecast: StructuralPrecastV1 | None = None
+    UtilityUndergroundPrecast: UtilityUndergroundPrecastV1 | None = None

openepd/model/specs/generated/sheathing.py

@@ -0,0 +1,74 @@
+#
+#  Copyright 2024 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  This software was developed with support from the Skanska USA,
+#  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
+#  Find out more at www.BuildingTransparency.org
+#
+from openepd.compat.pydantic import pyd
+from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec
+from openepd.model.specs.generated.enums import GypsumFacing, GypsumFireRating, GypsumThickness
+from openepd.model.validation.quantity import LengthMmStr, validate_unit_factory
+
+
+class CementitiousSheathingBoardV1(BaseOpenEpdHierarchicalSpec):
+    """Cementitious sheathing board performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    cement_board_thickness: LengthMmStr | None = pyd.Field(default=None, description="", example="10 mm")
+
+    _cement_board_thickness_is_quantity_validator = pyd.validator("cement_board_thickness", allow_reuse=True)(
+        validate_unit_factory("m")
+    )
+
+
+class GypsumSheathingBoardV1(BaseOpenEpdHierarchicalSpec):
+    """Gypsum sheathing board performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    fire_rating: GypsumFireRating | None = pyd.Field(default=None, description="", example="-")
+    thickness: GypsumThickness | None = pyd.Field(default=None, description="", example="9 mm")
+    facing: GypsumFacing | None = pyd.Field(default=None, description="", example="Paper")
+
+    r_factor: str | None = pyd.Field(default=None, description="", example="1 RSI")
+
+    flame_spread_astm_e84: int | None = pyd.Field(default=None, description="", example=3)
+    smoke_production_astm_e84: int | None = pyd.Field(default=None, description="", example=3)
+    surface_abrasion_d4977: int | None = pyd.Field(default=None, description="", example=3)
+    indentation_d5420: int | None = pyd.Field(default=None, description="", example=3)
+    soft_body_impact_e695: int | None = pyd.Field(default=None, description="", example=3)
+    hard_body_impact_c1929: int | None = pyd.Field(default=None, description="", example=3)
+
+    mold_resistant: bool | None = pyd.Field(default=None, description="", example=True)
+    foil_backing: bool | None = pyd.Field(default=None, description="", example=True)
+    moisture_resistant: bool | None = pyd.Field(default=None, description="", example=True)
+    abuse_resistant: bool | None = pyd.Field(default=None, description="", example=True)
+
+    _gypsum_thickness_is_quantity_validator = pyd.validator("thickness", allow_reuse=True)(validate_unit_factory("m"))
+    _gypsum_r_factor_is_quantity_validator = pyd.validator("r_factor", allow_reuse=True)(validate_unit_factory("RSI"))
+
+
+class SheathingV1(BaseOpenEpdHierarchicalSpec):
+    """Sheathing performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    CementitiousSheathingBoard: CementitiousSheathingBoardV1 | None = None
+    GypsumSheathingBoard: GypsumSheathingBoardV1 | None = None

openepd/model/specs/generated/steel.py

@@ -0,0 +1,224 @@
+#
+#  Copyright 2024 by C Change Labs Inc. www.c-change-labs.com
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  This software was developed with support from the Skanska USA,
+#  Charles Pankow Foundation, Microsoft Sustainability Fund, Interface, MKA Foundation, and others.
+#  Find out more at www.BuildingTransparency.org
+#
+from openepd.compat.pydantic import pyd
+from openepd.model.specs.base import BaseOpenEpdHierarchicalSpec, BaseOpenEpdSpec
+from openepd.model.specs.generated.enums import SteelComposition, SteelRebarGrade
+from openepd.model.specs.steel import SteelMakingRoute
+from openepd.model.standard import Standard
+from openepd.model.validation.numbers import RatioFloat
+from openepd.model.validation.quantity import LengthMmStr, PressureMPaStr, validate_unit_factory
+
+
+class SteelFabricatedMixin(BaseOpenEpdSpec):
+    """Class with fabricated property used in different parts of steel hierarchy."""
+
+    fabricated: bool | None = pyd.Field(default=None, description="", example=True)
+
+
+class ColdFormedFramingV1(BaseOpenEpdHierarchicalSpec):
+    """Cold formed framing performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class DeckingSteelV1(BaseOpenEpdHierarchicalSpec):
+    """Cold Formed Steel Decking."""
+
+    _EXT_VERSION = "1.0"
+
+
+class SteelSuspensionAssemblyV1(BaseOpenEpdHierarchicalSpec):
+    """Steel suspension assembly performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class HollowSectionsV1(BaseOpenEpdHierarchicalSpec, SteelFabricatedMixin):
+    """Hollow sections performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+
+
+class HotRolledSectionsV1(BaseOpenEpdHierarchicalSpec, SteelFabricatedMixin):
+    """Hot rolled sections performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+
+
+class PlateSteelV1(BaseOpenEpdHierarchicalSpec, SteelFabricatedMixin):
+    """Plate Steels."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+
+
+class MetalRailingsV1(BaseOpenEpdHierarchicalSpec):
+    """Metal railings performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class MetalStairsV1(BaseOpenEpdHierarchicalSpec):
+    """Metal stairs performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class MiscMetalFabricationV1(BaseOpenEpdHierarchicalSpec):
+    """Misc metal fabrication performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class OpenWebMembranesV1(BaseOpenEpdHierarchicalSpec):
+    """Open web membranes performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class MBQSteelV1(BaseOpenEpdHierarchicalSpec):
+    """M b q steel performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class CoilSteelV1(BaseOpenEpdHierarchicalSpec):
+    """Coil steel performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+
+class ColdFormedSteelV1(BaseOpenEpdHierarchicalSpec):
+    """Cold Formed Structural Steel."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    ColdFormedFraming: ColdFormedFramingV1 | None = None
+    DeckingSteel: DeckingSteelV1 | None = None
+    SteelSuspensionAssembly: SteelSuspensionAssemblyV1 | None = None
+
+
+class StructuralSteelV1(BaseOpenEpdHierarchicalSpec):
+    """Structural Steel."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    modulus_of_elasticity: PressureMPaStr | None = pyd.Field(default=None, description="", example="1.0 MPa")
+    thermal_expansion: str | None = pyd.Field(default=None, description="", example="1 / K")
+    thermal_conductivity: str | None = pyd.Field(default=None, description="", example="1 W / (m * K)")
+
+    _steel_modulus_of_elasticity_is_quantity_validator = pyd.validator("modulus_of_elasticity", allow_reuse=True)(
+        validate_unit_factory("MPa")
+    )
+    _steel_thermal_expansion_is_quantity_validator = pyd.validator("thermal_expansion", allow_reuse=True)(
+        validate_unit_factory("1 / K")
+    )
+    _steel_thermal_conductivity_is_quantity_validator = pyd.validator("thermal_conductivity", allow_reuse=True)(
+        validate_unit_factory("W / (m * K)")
+    )
+
+    # Nested specs:
+    HollowSections: HollowSectionsV1 | None = None
+    HotRolledSections: HotRolledSectionsV1 | None = None
+    PlateSteel: PlateSteelV1 | None = None
+
+
+class PrefabricatedSteelAssembliesV1(BaseOpenEpdHierarchicalSpec):
+    """Prefabricated steel assemblies performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Nested specs:
+    MetalRailings: MetalRailingsV1 | None = None
+    MetalStairs: MetalStairsV1 | None = None
+    MiscMetalFabrication: MiscMetalFabricationV1 | None = None
+    OpenWebMembranes: OpenWebMembranesV1 | None = None
+
+
+class PostTensioningSteelV1(BaseOpenEpdHierarchicalSpec):
+    """Post-Tensioning Steels, per https://www.concretenetwork.com/post-tension/industry.html."""
+
+    _EXT_VERSION = "1.0"
+
+
+class RebarSteelV1(BaseOpenEpdHierarchicalSpec, SteelFabricatedMixin):
+    """Bar steels, such as rebar for concrete reinforcement."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    grade: SteelRebarGrade | None = pyd.Field(default=None, description="", example="60 ksi")
+    diameter_min: LengthMmStr | None = pyd.Field(default=None, description="", example="8 mm")
+    bending_pin_max: float | None = pyd.Field(default=None, description="", example=2.3)
+    ts_ys_ratio_max: float | None = pyd.Field(default=None, description="", example=2.3)
+    epoxy_coated: bool | None = pyd.Field(default=None, description="", example=True)
+
+    _steel_rebar_diameter_min_is_quantity_validator = pyd.validator("diameter_min", allow_reuse=True)(
+        validate_unit_factory("m")
+    )
+
+
+class WireMeshSteelV1(BaseOpenEpdHierarchicalSpec, SteelFabricatedMixin):
+    """Mild steel wire for reinforcement, connections, and meshes."""
+
+    _EXT_VERSION = "1.0"
+
+
+class SteelV1(BaseOpenEpdHierarchicalSpec):
+    """Steel performance specification."""
+
+    _EXT_VERSION = "1.0"
+
+    # Own fields:
+    yield_tensile_str: PressureMPaStr | None = pyd.Field(default=None, description="", example="1 MPa")
+    bar_elongation: float | None = pyd.Field(default=None, description="", example=2.3)
+    recycled_content: RatioFloat | None = pyd.Field(default=None, description="", example=0.5, ge=0, le=1)
+    post_consumer_recycled_content: RatioFloat | None = pyd.Field(default=None, description="", example=0.5, ge=0, le=1)
+    astm_marking: str | None = pyd.Field(default=None, description="")
+    euro_marking: str | None = pyd.Field(default=None, description="")
+    composition: SteelComposition | None = pyd.Field(default=None, description="", example="Carbon")
+    cold_finished: bool | None = pyd.Field(default=None, description="", example=True)
+    galvanized: bool | None = pyd.Field(default=None, description="", example=True)
+    stainless: bool | None = pyd.Field(default=None, description="", example=True)
+    making_route: SteelMakingRoute | None = pyd.Field(default=None)
+    astm_standards: list[Standard] | None = pyd.Field(default=None, description="")
+    sae_standards: list[Standard] | None = pyd.Field(default=None, description="")
+    en_standards: list[Standard] | None = pyd.Field(default=None, description="")
+
+    _steel_yield_tensile_str_is_quantity_validator = pyd.validator("yield_tensile_str", allow_reuse=True)(
+        validate_unit_factory("MPa")
+    )
+
+    # Nested specs:
+    MBQSteel: MBQSteelV1 | None = None
+    CoilSteel: CoilSteelV1 | None = None
+    ColdFormedSteel: ColdFormedSteelV1 | None = None
+    StructuralSteel: StructuralSteelV1 | None = None
+    PrefabricatedSteelAssemblies: PrefabricatedSteelAssembliesV1 | None = None
+    PostTensioningSteel: PostTensioningSteelV1 | None = None
+    RebarSteel: RebarSteelV1 | None = None
+    WireMeshSteel: WireMeshSteelV1 | None = None