opencrbasic 1.0.0__py3-none-any.whl

opencrbasic/data/cr1000x/measure.json

@@ -0,0 +1,121 @@
+{
+ "range_codes": [800, 802, 804, 810, 820, 822, 824, 830],
+ "range_code_message": "Invalid range code, valid options are: mV5000, mV1000, mV200, or AutoRange.",
+ "range_code_instructions": {
+  "VOLTSE": 3,
+  "VOLTDIFF": 3,
+  "TCSE": 3,
+  "TCDIFF": 3,
+  "CURRENTSE": 3,
+  "BRHALF": [3, 3],
+  "BRHALF3W": [3, 3],
+  "BRFULL": [3, 3],
+  "BRHALF4W": [3, 4],
+  "BRFULL6W": [3, 4]
+ },
+ "sw12_ports": [501, 502, 503],
+ "sw12_port_messages": {"0": "Invalid port 6642484, must be NULL.", "-1": "Invalid port 6642484, must be ."},
+ "delay": {
+  "option0_limit": 3600000000,
+  "option1_limit": 86400000000,
+  "task_memory": true,
+  "sdm_slow_sequence": true
+ },
+ "gps": {
+  "ports": [1, 9, 10, 11, 12],
+  "pps_port": 9,
+  "port_message": "Only COMRS232, COMC1, COMC3..COMC7 are legal.",
+  "pps_message": "GPS pps synchronization is only available on COMC1.",
+  "structure_members": [
+   {"member": "NMEASENTENCES", "type": "STRING", "min_string_size": 96, "message": "Size of NMEASentences is too small, must be at least 100"}
+  ]
+ },
+ "tablefile": {"drives": ["CRD", "USB", "USR"]},
+ "string_prefixes": [
+  {"instr": "FILEMANAGE", "pos": 1, "prefixes": ["CPU", "CRD", "USR", "USB"], "ext": "CR1X", "message": "FileManage invalid drive: {drive}."},
+  {"instr": "RUNPROGRAM", "pos": 1, "prefixes": ["CPU", "CRD", "USR", "USB"], "ext": "CR1X", "message": "FileManage invalid drive: {drive}."}
+ ],
+ "const_ranges": [
+  {"instr": "CPISPEED", "pos": 1, "skip_strings": true, "values": [50, 125, 250, 500, 1000], "message": "Invalid CPI bit rate."},
+  {"instr": "SEMAPHOREGET", "pos": 1, "min": 1, "max": 4, "message": "Illegal Semaphore: 1..4 are legal, 1 to 3 are general purpose, 4 is reserved (see docs)"},
+  {"instr": "SEMAPHORERELEASE", "pos": 1, "min": 1, "max": 4, "message": "Illegal Semaphore: 1..4 are legal, 1 to 3 are general purpose, 4 is reserved (see docs)"},
+  {"instr": "BROADCAST", "pos": 2, "values": [0, 12, 13, 14], "message": "Illegal message type {value}"},
+  {"instr": "STATICROUTE", "pos": 2, "wrap16": true, "overflow": 0, "min": 1, "max": 4094, "message": "Illegal neighbor address {value}, range 1..4095"},
+  {"instr": "STATICROUTE", "pos": 3, "show": 2, "wrap16": true, "overflow": 0, "min": 1, "max": 4094, "message": "Illegal PakBus address {value}, range 1..4095"},
+  {"instr": "ACPOWER", "pos": 2, "min": 1, "max": 3, "message": "Legal configuration is 1..3."},
+  {"instr": "EXCITEV", "pos": 1, "min": 601, "max": 604, "message": "Invalid channel, must use Vx1..Vx4."},
+  {"instr": "CDM_BRHALF3W", "pos": 6, "min": 1, "max": 16, "message": "Input channel: {value}, out of range (1 - 16)."},
+  {"instr": "CDM_BRHALF3W", "pos": 6, "lower_gate": 1, "min": 1, "max": 15, "message": "Reps cycle input beyond last channel!"},
+  {"instr": "CDM_TCCOMP", "pos": 5, "min": 1, "max": 20, "message": "Input channel: {value}, out of range (1 - 20)."},
+  {"instr": "CDM_TCCOMP", "pos": 8, "values": [0, 1, 2], "warn_values": [-1], "warn_message": "Open detection disabled.", "message": "Temperature unit unsupported. Must be 0 (Celsius), 1 (Fahrenheit), or 2 (Kelvin)"},
+  {"instr": "CDM_SW5", "pos": 3, "values": [1, 2], "by_module": {"220": [1, 2], "221": [1, 2, 3, 4], "222": [1, 2], "223": [1, 2, 3, 4]}, "message": "Unrecognized port!"},
+  {"instr": "CDM_PULSEPORT", "pos": 3, "by_module": {"220": [1, 2], "221": [1, 2, 3, 4], "222": [1, 2], "223": [1, 2, 3, 4]}, "message": "Unrecognized port!"},
+  {"instr": "CDM_SW12", "pos": 3, "by_module": {"220": [1], "221": [1, 2], "222": [1], "223": [1, 2]}, "message": "Unrecognized port!"},
+  {"instr": "CDM_VOLTDIFF", "pos": 6, "min": 1, "max": 16, "skip_modules": ["220", "221", "222", "223"], "message": "Input channel: {value}, out of range (1 - 16)."},
+  {"instr": "CDM_VOLTDIFF", "pos": 6, "channel_by_module": {"220": 8, "221": 16, "222": 8, "223": 16}, "role": "ic", "message": "Input channel: {value}, out of range (1 - {max})."},
+  {"instr": "CDM_VOLTDIFF", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_VOLTDIFF", "pos": 6, "channel_by_module": {"220": 8, "221": 16, "222": 8, "223": 16}, "role": "rc", "message": "Reps cycle input beyond last channel!"},
+  {"instr": "CDM_VOLTDIFF", "pos": 6, "channel_by_module": {"220": 8, "221": 16, "222": 8, "223": 16}, "role": "tm", "message": "Two-measurement instruction starting on last input channel!"},
+  {"instr": "CDM_VOLTDIFF", "pos": 4, "min": 1, "max": 2147483647, "message": "MeasPEx: {value}, must be greater than 0."},
+  {"instr": "CDM_VOLTSE", "pos": 6, "channel_by_module": {"220": 16, "221": 32, "222": 16, "223": 32}, "role": "ic", "message": "Input channel: {value}, out of range (1 - {max})."},
+  {"instr": "CDM_VOLTSE", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_VOLTSE", "pos": 6, "channel_by_module": {"220": 16, "221": 32, "222": 16, "223": 32}, "role": "rc", "message": "Reps cycle input beyond last channel!"},
+  {"instr": "CDM_VOLTSE", "pos": 6, "channel_by_module": {"220": 16, "221": 32, "222": 16, "223": 32}, "role": "tm", "message": "Two-measurement instruction starting on last input channel!"},
+  {"instr": "CDM_VOLTSE", "pos": 4, "min": 1, "max": 2147483647, "message": "MeasPEx: {value}, must be greater than 0."},
+  {"instr": "CDM_TCSE", "pos": 6, "channel_by_module": {"220": 16, "221": 32, "222": 16, "223": 32}, "role": "ic", "message": "Input channel: {value}, out of range (1 - {max})."},
+  {"instr": "CDM_TCSE", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_TCSE", "pos": 6, "channel_by_module": {"220": 16, "221": 32, "222": 16, "223": 32}, "role": "rc", "message": "Reps cycle input beyond last channel!"},
+  {"instr": "CDM_TCSE", "pos": 6, "channel_by_module": {"220": 16, "221": 32, "222": 16, "223": 32}, "role": "tm", "message": "Two-measurement instruction starting on last input channel!"},
+  {"instr": "CDM_TCSE", "pos": 4, "min": 1, "max": 2147483647, "message": "MeasPEx: {value}, must be greater than 0."},
+  {"instr": "CDM_TCDIFF", "pos": 6, "channel_by_module": {"220": 8, "221": 16, "222": 8, "223": 16}, "role": "ic", "message": "Input channel: {value}, out of range (1 - {max})."},
+  {"instr": "CDM_TCDIFF", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_TCDIFF", "pos": 6, "channel_by_module": {"220": 8, "221": 16, "222": 8, "223": 16}, "role": "rc", "message": "Reps cycle input beyond last channel!"},
+  {"instr": "CDM_TCDIFF", "pos": 6, "channel_by_module": {"220": 8, "221": 16, "222": 8, "223": 16}, "role": "tm", "message": "Two-measurement instruction starting on last input channel!"},
+  {"instr": "CDM_TCDIFF", "pos": 4, "min": 1, "max": 2147483647, "message": "MeasPEx: {value}, must be greater than 0."},
+  {"instr": "CDM_BRHALF", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_RESISTANCE", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_THERM107", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)"},
+  {"instr": "CDM_THERM107", "pos": 4, "min": 1, "max": 2147483647, "message": "MeasPEx: {value}, must be greater than 0."},
+  {"instr": "CDM_PANELTEMP", "pos": 5, "min": 1, "max": 1, "message": "PanelTemp channel out of range!"},
+  {"instr": "CDM_PERIODAVG", "pos": 6, "min": 1, "max": 16, "message": "Input channel: {value}, out of range (1 - 16)."},
+  {"instr": "CDM_PERIODAVG", "pos": 4, "min": 1, "max": 65536, "message": "Reps: {value}, out of range (1 - 65536)."},
+  {"instr": "CDM_PERIODAVG", "pos": 5, "min": 0, "max": 3, "message": "Unrecognized gain code!"},
+  {"instr": "CDM_PERIODAVG", "pos": 9, "min": 1, "max": 16777215, "message": "Cycles: {value}, out of range (1 - 16777215)."},
+  {"instr": "CDM_PERIODAVG", "pos": 10, "min": 1, "max": 1000, "message": "Timeout: {value}, out of range (1 - 1000)."},
+  {"instr": "CDM_PERIODAVG", "pos": 2, "min": 1, "max": 120, "message": "CPI Address must be 1..120."},
+  {"instr": "SDMSW8A", "pos": 5, "string_zero": true, "min": 1, "max": 8, "message": "Invalid Start Channel: {value}, must be 1-8."},
+  {"instr": "TDR200", "pos": 7, "min": 100, "max": 10112, "message": "Points {value} is illegal: range is 100..10112."},
+  {"instr": "TDR100", "pos": 7, "min": 20, "max": 2048, "message": "Points {value} is illegal: range is 20..2048."},
+  {"instr": "DNP", "pos": 1, "invalid_raw": {"strings": true, "nan": true, "outside_long": true, "values": [-2147483648]}, "message": "ComPort {value} illegal."},
+  {"inf_max": true, "instr": "VOLTSE", "pos": 6, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "VOLTSE", "pos": 6, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "VOLTDIFF", "pos": 6, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "VOLTDIFF", "pos": 6, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "TCSE", "pos": 8, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "TCSE", "pos": 8, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "TCDIFF", "pos": 8, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "TCDIFF", "pos": 8, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"instr": "BRHALF", "pos": 7, "lower_gate": -19, "min": 20, "max": 2147483647, "message": "Minimum Excitation is 20mV."},
+  {"instr": "BRFULL", "pos": 7, "lower_gate": -19, "min": 20, "max": 2147483647, "message": "Minimum Excitation is 20mV."},
+  {"instr": "BRHALF3W", "pos": 7, "lower_gate": -19, "min": 20, "max": 2147483647, "message": "Minimum Excitation is 20mV."},
+  {"instr": "BRHALF4W", "pos": 8, "lower_gate": -19, "min": 20, "max": 2147483647, "message": "Minimum Excitation is 20mV."},
+  {"instr": "BRFULL6W", "pos": 8, "lower_gate": -19, "min": 20, "max": 2147483647, "message": "Minimum Excitation is 20mV."},
+  {"instr": "BRHALF", "pos": 6, "min": 1, "max": 2147483647, "message": "Invalid measurements per excitation {value}"},
+  {"instr": "BRHALF3W", "pos": 6, "min": 1, "max": 2147483647, "message": "Invalid measurements per excitation {value}"},
+  {"instr": "BRFULL", "pos": 6, "min": 1, "max": 2147483647, "message": "Invalid measurements per excitation {value}"},
+  {"instr": "BRHALF4W", "pos": 7, "min": 1, "max": 2147483647, "message": "Invalid measurements per excitation {value}"},
+  {"instr": "BRFULL6W", "pos": 7, "min": 1, "max": 2147483647, "message": "Invalid measurements per excitation {value}"},
+  {"inf_max": true, "instr": "BRHALF", "pos": 9, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "BRHALF", "pos": 9, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "BRFULL", "pos": 10, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "BRFULL", "pos": 10, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "BRHALF3W", "pos": 9, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "BRHALF3W", "pos": 9, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "BRHALF4W", "pos": 11, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "BRHALF4W", "pos": 11, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "BRFULL6W", "pos": 11, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "BRFULL6W", "pos": 11, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."},
+  {"inf_max": true, "instr": "CURRENTSE", "pos": 6, "allow": [0], "min": 20, "max": 2147483647, "message": "Settling time {value} too short, min time is 20."},
+  {"inf_max": true, "instr": "CURRENTSE", "pos": 6, "min": -2147483648, "max": 6000000, "message": "Settling time {value} too long, max time is 6000000."}
+ ]
+}

opencrbasic/data/cr1000x/mode.json

@@ -0,0 +1,111 @@
+{
+ "always_sequential": [
+  "SDMAO4",
+  "SDMAO4A",
+  "SDMCAN",
+  "SDMCD16AC",
+  "SDMCVO4",
+  "SDMIO16",
+  "TDR100",
+  "TDR200",
+  "WRITEIO"
+ ],
+ "task_instructions": [
+  "AM25T",
+  "BATTERY",
+  "BRFULL",
+  "BRFULL6W",
+  "BRHALF",
+  "BRHALF3W",
+  "BRHALF4W",
+  "CALIBRATE",
+  "CDM_BATTERY",
+  "CDM_BRFULL",
+  "CDM_BRFULL6W",
+  "CDM_BRHALF",
+  "CDM_BRHALF3W",
+  "CDM_BRHALF4W",
+  "CDM_CURRENTDIFF",
+  "CDM_EXCITEV",
+  "CDM_MUXSELECT",
+  "CDM_PANELTEMP",
+  "CDM_PERIODAVG",
+  "CDM_PULSEPORT",
+  "CDM_SW12",
+  "CDM_SW5",
+  "CDM_SWPOWER",
+  "CDM_TCDIFF",
+  "CDM_TCSE",
+  "CDM_THERM107",
+  "CDM_THERM108",
+  "CDM_THERM109",
+  "CDM_VOLTDIFF",
+  "CDM_VOLTSE",
+  "CS616",
+  "CS7500",
+  "CSAT3",
+  "DELAY",
+  "EC100",
+  "EXCITEV",
+  "LI7200",
+  "LI7700",
+  "MUXSELECT",
+  "PANELTEMP",
+  "PERIODAVG",
+  "PORTGET",
+  "PORTSET",
+  "PULSECOUNT",
+  "PULSEPORT",
+  "SDMINT8",
+  "SDMSW8A",
+  "SDMTRIGGER",
+  "SDMX50",
+  "SERIALINRECORD",
+  "SERIALOUTBLOCK",
+  "SETDAC",
+  "SW12",
+  "TCDIFF",
+  "TCSE",
+  "TGA",
+  "THERM107",
+  "THERM108",
+  "THERM109",
+  "VOLTDIFF",
+  "VOLTSE"
+ ],
+ "nonconstant_arg": {
+  "CDM_EXCITEI": [
+   3
+  ],
+  "CDM_EXCITEV": [
+   3
+  ],
+  "CDM_MUXSELECT": [
+   5
+  ],
+  "CDM_SW12": [
+   3
+  ],
+  "CDM_SW5": [
+   3
+  ],
+  "CDM_SWPOWER": [
+   2
+  ],
+  "EXCITEV": [
+   1
+  ],
+  "MUXSELECT": [
+   3
+  ],
+  "PORTSET": [
+   1
+  ]
+ },
+ "variable_arg": {
+  "CDM_SW12": 4,
+  "CDM_SW5": 4,
+  "CDM_SWPOWER": 3,
+  "SW12": 2
+ }
+}

opencrbasic/data/cr1000x/pipeline_tasks.json

@@ -0,0 +1,88 @@
+{
+ "tasks": {
+  "PANELTEMP": {},
+  "BATTERY": {},
+  "VOLTSE": {},
+  "VOLTDIFF": {},
+  "PORTGET": {},
+  "PORTSET": {},
+  "THERM107": {},
+  "BRHALF": {},
+  "BRFULL": {},
+  "TCSE": {},
+  "TCDIFF": {},
+  "PERIODAVG": {},
+  "CS616": {},
+  "EXCITEV": {},
+  "BRHALF3W": {},
+  "BRHALF4W": {},
+  "BRFULL6W": {},
+  "THERM108": {},
+  "THERM109": {},
+  "AM25T": {},
+  "SERIALINRECORD": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "SerialInRecord illegally used inside conditional statement."}},
+  "CS7500": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "CS7500 illegally used inside conditional statement."}},
+  "CSAT3": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "CSAT3 illegally used inside conditional statement."}},
+  "LI7200": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "LI7200 illegally used inside conditional statement."}},
+  "LI7700": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "LI7700 illegally used inside conditional statement."}},
+  "SDMINT8": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "SDMINT8 illegally used inside conditional statement."}},
+  "SDMSW8A": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "SDMSW8A illegally used inside conditional statement."}},
+  "SDMX50": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "SDMX50 illegally used inside conditional statement."}},
+  "CALIBRATE": {"hides_unreached": true},
+  "PULSEPORT": {"hides_unreached": true},
+  "PULSECOUNT": {"conditional_only": true},
+  "DELAY": {"constant_values": {"1": [0]}},
+  "SW12": {"exempt_values": {"3": [1]}},
+  "SETDAC": {},
+  "EC100": {"hides_unreached": true, "main_sequence_only": true, "messages": {
+    "outside": "SDM instruction must be in Scan..NextScan, unless SequentialMode is used.",
+    "conditional": "EC100 illegally used inside conditional statement."}},
+  "CDM_ACPOWER": {"hides_unreached": true},
+  "CDM_BATTERY": {"hides_unreached": true},
+  "CDM_BRFULL": {"hides_unreached": true},
+  "CDM_BRFULL6W": {"hides_unreached": true},
+  "CDM_BRHALF": {"hides_unreached": true},
+  "CDM_BRHALF3W": {"hides_unreached": true},
+  "CDM_BRHALF4W": {"hides_unreached": true},
+  "CDM_CURRENTDIFF": {"hides_unreached": true},
+  "CDM_PANELTEMP": {"hides_unreached": true},
+  "CDM_PERIODAVG": {"hides_unreached": true},
+  "CDM_PULSEPORT": {"hides_unreached": true},
+  "CDM_RESISTANCE": {"hides_unreached": true},
+  "CDM_RESISTANCE3W": {"hides_unreached": true},
+  "CDM_TCCOMP": {"hides_unreached": true},
+  "CDM_TCDIFF": {"hides_unreached": true},
+  "CDM_TCSE": {"hides_unreached": true},
+  "CDM_THERM107": {"hides_unreached": true},
+  "CDM_THERM108": {"hides_unreached": true},
+  "CDM_THERM109": {"hides_unreached": true},
+  "CDM_VOLTDIFF": {"hides_unreached": true},
+  "CDM_VOLTSE": {"hides_unreached": true},
+  "CDM_EXCITEV": {"hides_unreached": true, "setup": true},
+  "CDM_EXCITEI": {"hides_unreached": true, "setup": true},
+  "CDM_MUXSELECT": {"hides_unreached": true, "setup": true},
+  "CDM_SW12": {"hides_unreached": true, "exempt_values": {"5": [1]}},
+  "CDM_SW5": {"hides_unreached": true, "exempt_values": {"5": [1]}},
+  "CDM_SWPOWER": {"hides_unreached": true, "exempt_values": {"4": [1]}},
+  "CDM_DELAY": {"hides_unreached": true, "constant_values": {"3": [0]}}
+ },
+ "argument_error_first": ["PORTSET"],
+ "slow_scan_no_task": {"DELAY": {"2": [0]}, "PORTSET": {"3": [1]}},
+ "slow_scan_tasks": ["PANELTEMP", "BATTERY", "VOLTSE", "VOLTDIFF", "PORTSET", "THERM107", "THERM108", "THERM109", "BRHALF", "BRHALF3W", "BRHALF4W", "BRFULL", "BRFULL6W", "TCSE", "TCDIFF", "PERIODAVG", "CS616", "DELAY", "PULSEPORT", "MUXSELECT", "CALIBRATE"]
+}

opencrbasic/data/cr1000x/settings_fields.json

@@ -0,0 +1,321 @@
+{
+ "_comment": "Names accepted by SetSetting (`settings`) and, in addition, by SetStatus (`status`; SetStatus accepts `settings` too). Candidate names came from the compiler's own field tables (pointer arrays in the exe, see docs/instructions.md 'SetSetting and SetStatus field names') and every candidate was confirmed with the oracle (2026-10-02). Matching is case-insensitive.",
+ "index_size": {"BAUDRATE": 14, "SECURITY": 3},
+ "trim_trailing_blanks": true,
+ "empty_name": "NULL",
+ "settings": [
+  "StationName",
+  "Security",
+  "PakBusAddress",
+  "PakBusEncryptionKey",
+  "PakBusTCPPassword",
+  "CPUDriveFree",
+  "CardBytesFree",
+  "USRDriveSize",
+  "ConfigComC1",
+  "ConfigComC3",
+  "SDCInfo",
+  "UTCOffset",
+  "SFTPPrivateKey",
+  "SFTPPublicKey",
+  "PakBusWebURL",
+  "PakBusWebHost",
+  "PakBusWebHandle",
+  "CloudConfigURL",
+  "NTPServer",
+  "DNS",
+  "IsRouter",
+  "CommsMemAlloc",
+  "RouteFilters",
+  "CentralRouters",
+  "USRDriveFree",
+  "FilesManager",
+  "IncludeFile",
+  "MaxPacketSize",
+  "RS232Power",
+  "RS232Handshaking",
+  "RS232Timeout",
+  "UDPBroadcastFilter",
+  "HTTPHeader",
+  "IPTraceComport",
+  "IPTraceCode",
+  "DeleteCardFilesOnMismatch",
+  "PCAP",
+  "USBEnumerate",
+  "DisableLithium",
+  "IPAddressUSB",
+  "USBVCPOnly",
+  "SkipPakBusRing",
+  "USBDisable",
+  "USBNotTrusted",
+  "EthernetEnable",
+  "EthernetInfo",
+  "EthernetPower",
+  "IPAddressEth",
+  "IPMaskEth",
+  "IPGateway",
+  "CSIO1netEnable",
+  "CSIO2netEnable",
+  "CSIOInfo",
+  "IPAddressCSIO",
+  "IPMaskCSIO",
+  "IPGatewayCSIO",
+  "pppInterface",
+  "PPPInfo",
+  "pppIPAddr",
+  "pppIPMask",
+  "pppUsername",
+  "pppPassword",
+  "pppDial",
+  "pppDialResponse",
+  "KeepAliveURL",
+  "KeepAliveMin",
+  "HTTPEnabled",
+  "PakbusWebEnabled",
+  "FTPEnabled",
+  "TelnetEnabled",
+  "PingEnabled",
+  "PakBusPort",
+  "FTPPort",
+  "HTTPPort",
+  "FTPUserName",
+  "FTPPassword",
+  "PakBusTCPClients",
+  "TrustedHosts",
+  "TCPMSS",
+  "TLSConnections",
+  "HTTPSEnabled",
+  "HTTPSPort",
+  "TLSstatus",
+  "TLSPrivateKey",
+  "TLSCertificate",
+  "TLSRootCA",
+  "TLSPassword",
+  "Baudrate",
+  "Beacon",
+  "Verify",
+  "Neighbors",
+  "CellAPN",
+  "CellStateInt",
+  "CellState",
+  "CellRSSI",
+  "CellRSRP",
+  "CellECIO",
+  "CellRSRQ",
+  "CellInfo",
+  "CellStatus",
+  "CellUsageToday",
+  "CellUsageYesterday",
+  "CellUsageMonth",
+  "CellUsageLastMonth",
+  "CellBillingDay",
+  "CellDiversity",
+  "CellIPProtocol",
+  "CellRoaming",
+  "CellOSUpdate",
+  "CellModOTAUpdate",
+  "CellNetCellID",
+  "CellNetBand",
+  "CellPwrStartTime",
+  "CellPwrDuration",
+  "CellPwrRepeat",
+  "MQTTStatusInterval",
+  "MQTTStateInterval",
+  "MQTTBaseTopic",
+  "UID",
+  "MQTTEndpoint",
+  "MQTTPortNumber",
+  "MQTTClientID",
+  "MQTTUserName",
+  "MQTTPassword",
+  "MQTTWillTopic",
+  "MQTTWillMessage",
+  "MQTTWillQoS",
+  "MQTTWillRetain",
+  "MQTTCleanSession",
+  "MQTTAutoPublish",
+  "MQTTKeepAlive",
+  "MQTTEnable",
+  "CampbellCloudEnable",
+  "MQTTState",
+  "MQTTBackfillMode",
+  "WiFiConfig",
+  "WiFiStatus",
+  "IPAddressWiFi",
+  "IPMaskWiFi",
+  "IPGatewayWiFi",
+  "WLANDomainName",
+  "WiFiSSID",
+  "WiFiPassword",
+  "WiFiRegion",
+  "WiFiTxPowerLevel",
+  "WiFiPowerMode",
+  "WiFiEapMethod",
+  "WiFiEapUser",
+  "WiFiEapPassword",
+  "WiFiChannel",
+  "WiFiNetworks",
+  "WiFiFwdCode",
+  "RadioCarrier",
+  "RadioVersion",
+  "RadioSerialNum",
+  "RadioModOS",
+  "RadioEnable",
+  "RadioOpMode",
+  "RadioFreqKey",
+  "RadioHopVersion",
+  "RadioHopSize",
+  "RadioMaxPacket",
+  "RadioMinPacket",
+  "RadioDataRate",
+  "RadioTxPwr",
+  "RadioRetryTimeout",
+  "RadioLowPwr",
+  "RadioRepeaters",
+  "RadioPacketRepeat",
+  "RadioEndPointRetry",
+  "RadioFreqRepeat",
+  "RadioMGSync",
+  "RadioEndPointRepeat",
+  "RadioRxSubID",
+  "RadioTxSubID",
+  "RadioDiag",
+  "RadioRetryOdds",
+  "RadioTxRate",
+  "RadioNetID",
+  "RadioFreqZone",
+  "RadioModel",
+  "RadioStats",
+  "RadioOS",
+  "RadioMAC",
+  "RadioFirmwareVer",
+  "RadioModuleVer",
+  "RadioRSSI",
+  "RadioRSSIAddr",
+  "RadioAvailFreq",
+  "RadioChanMask",
+  "RadioHopSeq",
+  "RadioTxLevel",
+  "RadioPwrMode",
+  "RadioRetries",
+  "RadioProtocol",
+  "GOESEnabled",
+  "GOESComport",
+  "GOESMsgWindow",
+  "GOESRepeatCount",
+  "GOESGainSetting",
+  "GOESPlatformID",
+  "GOESRTBaudRate",
+  "GOESRTChannel",
+  "GOESSTBaudRate",
+  "GOESSTChannel",
+  "GOESRTInterval",
+  "GOESSTInterval",
+  "GOESSTOffset",
+  "GOESid",
+  "GOESdateTime",
+  "GOESversion",
+  "GOESAntennaGain",
+  "GOESCurrentbattery",
+  "GOESCurrenttemperature",
+  "GOESbatteryBeforeTx",
+  "GOEStemperatureBeforeTx",
+  "GOESbatteryDuringTx",
+  "GOESLatitude",
+  "GOESLongitude",
+  "GOESAltitude",
+  "GOESTimeLastGPSPosition",
+  "GOESNumberOfMissedGPS",
+  "GOESTimeLastMissedGPSFix",
+  "GOESGPSAcquisitionStatus",
+  "GOESGPSAntennaStatus",
+  "GOESFailSafeIndicator",
+  "GOESDurationOfTransmit",
+  "GOESForwardTxPower",
+  "GOESReflectedRfPower",
+  "GOESVSWR",
+  "GOESLastTxControlFlags",
+  "GOESLastTxStartTime",
+  "GOESLastTxChannel",
+  "GOESLastTypeCode",
+  "GOESLastDatalength",
+  "GOESLastHDRFlagWord",
+  "GOESTxResultCode",
+  "GOESCurrentTxState",
+  "CH400EnableChargeA",
+  "CH400EnableChargeB",
+  "CH400EnableBatteryA",
+  "CH400EnableBatteryB",
+  "CH400BatteryAFamily",
+  "CH400BatteryACapacity",
+  "CH400BatteryBFamily",
+  "CH400BatteryBCapacity",
+  "CH400EnableChargeAMPPT",
+  "CH400EnableChargeBMPPT",
+  "CH400BatteryAParallel",
+  "CH400BatteryBParallel",
+  "CH400InputCurrentLimit",
+  "CH400BatteryADoDReset",
+  "CH400BatteryBDoDReset",
+  "CH400OSVersion",
+  "CH400OSDate",
+  "CH400BoardRev",
+  "CH400SerialNumber",
+  "ConfigComC5",
+  "ConfigComC7"
+ ],
+ "status": [
+  "OSVersion",
+  "OSDate",
+  "OSSignature",
+  "SerialNumber",
+  "RevBoard",
+  "RecipeStatus",
+  "ProgName",
+  "StartTime",
+  "RunSignature",
+  "ProgSignature",
+  "WatchdogErrors",
+  "PanelTemp",
+  "Battery",
+  "LithiumBattery",
+  "Low12VCount",
+  "CompileResults",
+  "StartUpCode",
+  "ProgErrors",
+  "VarOutOfBound",
+  "SkippedScan",
+  "SkippedSystemScan",
+  "SkippedSlowScan",
+  "ErrorCalib",
+  "MemorySize",
+  "MemoryFree",
+  "CommsMemFree",
+  "FullMemReset",
+  "CardStatus",
+  "MeasureOps",
+  "MeasureTime",
+  "ProcessTime",
+  "MaxProcTime",
+  "BuffDepth",
+  "MaxBuffDepth",
+  "LastSystemScan",
+  "LastSlowScan",
+  "SystemProcTime",
+  "SlowProcTime",
+  "MaxSystemProcTime",
+  "MaxSlowProcTime",
+  "PortStatus",
+  "PortConfig",
+  "SW12Volts",
+  "PakBusRoutes",
+  "Messages",
+  "CalVolts",
+  "CalRefSlope",
+  "CalRefOffset",
+  "CalGain",
+  "CalOffset",
+  "CalCurrent",
+  "SW12CSIO"
+ ]
+}