onnx 1.20.1__cp311-cp311-win_arm64.whl

onnx/defs/nn/defs.cc

@@ -0,0 +1,3754 @@
+/*
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <algorithm>
+
+#include "onnx/common/assertions.h"
+#include "onnx/defs/function.h"
+#include "onnx/defs/nn/utils.h"
+#include "onnx/defs/schema.h"
+
+namespace ONNX_NAMESPACE {
+static constexpr const char* pads_doc =
+    "Padding for the beginning and ending along each spatial axis, it can take any value greater "
+    "than or equal to 0. The value represent the number of pixels added to the beginning "
+    "and end part of the corresponding axis. `pads` format should be as follow "
+    "[x1_begin, x2_begin...x1_end, x2_end,...], where xi_begin the number of pixels "
+    "added at the beginning of axis `i` and xi_end, the number of pixels added at "
+    "the end of axis `i`. This attribute cannot be used simultaneously with "
+    "auto_pad attribute. If not present, the padding defaults to 0 along start and end of each spatial axis.";
+static constexpr const char* conv_auto_pad_doc =
+    "auto_pad must be either NOTSET, SAME_UPPER, SAME_LOWER or VALID. Where "
+    "default value is NOTSET, which means explicit padding is used. "
+    "SAME_UPPER or SAME_LOWER mean pad the input so that "
+    "`output_shape[i] = ceil(input_shape[i] / strides[i])` for each axis `i`. "
+    "The padding is split between the two sides equally or almost equally (depending "
+    "on whether it is even or odd). In case the padding is an odd number, the extra "
+    "padding is added at the end for SAME_UPPER and at the beginning for SAME_LOWER.";
+static constexpr const char* conv_transpose_auto_pad_doc =
+    "auto_pad must be either NOTSET, SAME_UPPER, SAME_LOWER or VALID. Where "
+    "default value is NOTSET, which means explicit padding is used. "
+    "SAME_UPPER or SAME_LOWER mean pad the input so that "
+    "`output_shape[i] = input_shape[i] * strides[i]` for each axis `i`. "
+    "The padding is split between the two sides equally or almost equally (depending "
+    "on whether it is even or odd). In case the padding is an odd number, the extra "
+    "padding is added at the end for SAME_UPPER and at the beginning for SAME_LOWER.";
+
+ONNX_API void convPoolShapeInference(
+    InferenceContext& ctx,
+    bool use_dilation,
+    bool require_kernel_shape,
+    int input1Idx,
+    int input2Idx) {
+  // we need the first input shape for this inference.
+  if (!hasInputShape(ctx, input1Idx)) {
+    return;
+  }
+
+  // if kernel shape is an input (and not attribute)
+  // we need the shape of the second input.
+  if (!require_kernel_shape && !hasInputShape(ctx, input2Idx)) {
+    return;
+  }
+
+  auto input_shape = ctx.getInputType(input1Idx)->tensor_type().shape();
+  if (input_shape.dim_size() < 2) {
+    fail_shape_inference("Input tensor must have at least 2 dimensions");
+  }
+
+  // first dim is the batch axis and the next is the number of channels.
+  size_t n_input_dims = static_cast<size_t>(input_shape.dim_size() - 2);
+
+  // Only MaxPool and Conv support dilation. For
+  // simplicity of the code, we just treat the rest of them as having all-1s
+  // dilation.
+  std::vector<int64_t> dilations;
+  if (use_dilation && getRepeatedAttribute(ctx, "dilations", dilations)) {
+    if (dilations.size() != n_input_dims) {
+      fail_shape_inference("Attribute dilations has incorrect size");
+    }
+  } else {
+    dilations.assign(n_input_dims, 1);
+  }
+
+  std::vector<int64_t> strides;
+  if (getRepeatedAttribute(ctx, "strides", strides)) {
+    if (strides.size() != n_input_dims) {
+      fail_shape_inference("Attribute strides has incorrect size");
+    }
+  } else {
+    strides.assign(n_input_dims, 1);
+  }
+
+  std::vector<int64_t> kernel_shape;
+  if (getRepeatedAttribute(ctx, "kernel_shape", kernel_shape)) {
+    if (kernel_shape.size() != n_input_dims) {
+      fail_shape_inference("Attribute kernel_shape has incorrect size");
+    }
+  } else if (require_kernel_shape) {
+    fail_shape_inference("Attribute kernel_shape must be specified");
+  } else {
+    auto second_input_shape = ctx.getInputType(input2Idx)->tensor_type().shape();
+    for (int i = 2; i < second_input_shape.dim_size(); ++i) {
+      if (!second_input_shape.dim(i).has_dim_value()) {
+        return;
+      }
+      kernel_shape.push_back(second_input_shape.dim(i).dim_value());
+    }
+  }
+
+  std::vector<int64_t> effective_kernel_shape = kernel_shape;
+  for (size_t i = 0; i < kernel_shape.size(); i++) {
+    // accounting for dilation, how big is the kernel in this dimension
+    effective_kernel_shape[i] = (effective_kernel_shape[i] - 1) * dilations[i] + 1;
+  }
+
+  std::vector<int64_t> pads;
+  if (getRepeatedAttribute(ctx, "pads", pads)) {
+    if (pads.size() != n_input_dims * 2) {
+      fail_shape_inference("Attribute pads has incorrect size");
+    }
+  } else {
+    pads.assign(n_input_dims * 2, 0);
+    const auto* auto_pad_attr = ctx.getAttribute("auto_pad");
+    if ((nullptr != auto_pad_attr) && (auto_pad_attr->s() != "VALID")) {
+      int input_dims_size = static_cast<int>(n_input_dims);
+      for (int i = 0; i < input_dims_size; ++i) {
+        int64_t residual = 0;
+        int64_t stride = strides[i];
+        if (stride > 1) {
+          if (!input_shape.dim(2 + i).has_dim_value()) {
+            continue;
+          }
+          residual = input_shape.dim(2 + i).dim_value();
+          while (residual >= stride) {
+            residual -= stride;
+          }
+        }
+        if (i >= static_cast<int>(effective_kernel_shape.size())) {
+          fail_shape_inference("kernel shape should have ", input_dims_size, " values in ", ctx.getDisplayName(), ".");
+        }
+        int64_t total_pad = residual == 0 ? effective_kernel_shape[i] - stride : effective_kernel_shape[i] - residual;
+        if (total_pad < 0)
+          total_pad = 0;
+        int64_t half_pad_small = total_pad >> 1;
+        int64_t half_pad_big = total_pad - half_pad_small;
+        if (auto_pad_attr->s() == "SAME_UPPER") {
+          pads[i] = half_pad_small;
+          pads[i + input_dims_size] = half_pad_big;
+        } else if (auto_pad_attr->s() == "SAME_LOWER") {
+          pads[i] = half_pad_big;
+          pads[i + input_dims_size] = half_pad_small;
+        }
+      }
+    }
+  }
+
+  auto output_shape = ctx.getOutputType(0)->mutable_tensor_type()->mutable_shape();
+
+  if (require_kernel_shape) {
+    // add the first two dimensions from the input.
+    *output_shape->add_dim() = input_shape.dim(0);
+    *output_shape->add_dim() = input_shape.dim(1);
+  } else {
+    *output_shape->add_dim() = input_shape.dim(0);
+    auto& second_input_shape = getInputShape(ctx, input2Idx);
+    if (second_input_shape.dim_size() < 1) {
+      fail_shape_inference("Second input tensor has wrong dimension");
+    }
+    *output_shape->add_dim() = second_input_shape.dim(0);
+  }
+
+  int kernel_shape_size = static_cast<int>(kernel_shape.size());
+  for (int i = 0; i < kernel_shape_size; ++i) {
+    auto newdim = output_shape->add_dim();
+    if (!input_shape.dim(2 + i).has_dim_value()) {
+      continue;
+    }
+    // how big is the input, including padding
+    int64_t input_size = input_shape.dim(2 + i).dim_value();
+    int64_t effective_input_size = input_size + pads[i] + pads[i + kernel_shape_size];
+
+    // default is floor mode .i.e. ceil_mode is set to 0
+    auto ceil_mode = getAttribute(ctx, "ceil_mode", 0);
+
+    int64_t output_size =
+        (effective_input_size - effective_kernel_shape[i] + (ceil_mode ? strides[i] - 1 : 0)) / strides[i] + 1;
+    if (ceil_mode == 1 && (output_size - 1) * strides[i] >= (input_size + pads[i])) {
+      // we need to match pytorch's behavior of "Sliding windows that would start in the right padded region are
+      // ignored." (https://pytorch.org/docs/stable/generated/torch.nn.MaxPool1d.html#maxpool1d). this code follows the
+      // same logic as PyTorch's C++ implementation:
+      // https://github.com/pytorch/pytorch/blob/f1cdb39da3850c47d51ec6a5b1ae864c32b3accf/aten/src/ATen/native/Pool.h#L54C21-L54C21
+      --output_size;
+    }
+
+    newdim->set_dim_value(output_size);
+  }
+
+  if (ctx.getNumOutputs() > 1) {
+    // MaxPool with two outputs case.
+    auto second_output_shape = ctx.getOutputType(1)->mutable_tensor_type()->mutable_shape();
+    second_output_shape->CopyFrom(*output_shape);
+  }
+}
+
+static std::vector<std::string> GetSupportedDataTypesForPoolingOps(bool supports8bit) {
+  if (supports8bit) {
+    return OpSchema::all_float_types_plus_Xint8_ir4();
+  }
+  return OpSchema::all_float_types_ir4();
+}
+
+static std::function<void(OpSchema&)> PoolOpSchemaGenerator(
+    const char* name,
+    const char* opName,
+    const char* additionalDescription,
+    bool use_dilation,
+    bool supports8bit = false) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+ {name} consumes an input tensor X and applies {opName} pooling across
+ the tensor according to kernel sizes, stride sizes, and pad lengths.
+ {opName} pooling consisting of computing the {opName} on all values of a
+ subset of the input tensor according to the kernel size and downsampling the
+ data into the output tensor Y for further processing. The output spatial shape is calculated differently
+ depending on whether explicit padding is used, where pads is employed, or auto padding is used, where auto_pad is utilized.
+ With explicit padding (https://pytorch.org/docs/stable/generated/torch.nn.MaxPool2d.html?highlight=maxpool#torch.nn.MaxPool2d):
+ ```
+ output_spatial_shape[i] = floor((input_spatial_shape[i] + pad_shape[i] - dilation[i] * (kernel_shape[i] - 1) - 1) / strides_spatial_shape[i] + 1)
+ ```
+ or
+ ```
+ output_spatial_shape[i] = ceil((input_spatial_shape[i] + pad_shape[i] - dilation[i] * (kernel_shape[i] - 1) - 1) / strides_spatial_shape[i] + 1)
+ ```
+ if ceil_mode is enabled. `pad_shape[i]` is the sum of pads along axis `i`. Sliding windows that would start in the right padded region are ignored.
+
+ `auto_pad` is a DEPRECATED attribute. If you are using them currently, the output spatial shape will be following when ceil_mode is enabled:
+ ```
+ VALID: output_spatial_shape[i] = ceil((input_spatial_shape[i] - {kernelSpatialShape} + 1) / strides_spatial_shape[i])
+ SAME_UPPER or SAME_LOWER: output_spatial_shape[i] = ceil(input_spatial_shape[i] / strides_spatial_shape[i])
+ ```
+ or when ceil_mode is disabled (https://www.tensorflow.org/api_docs/python/tf/keras/layers/AveragePooling2D):
+ ```
+ VALID: output_spatial_shape[i] = floor((input_spatial_shape[i] - {kernelSpatialShape}) / strides_spatial_shape[i]) + 1
+ SAME_UPPER or SAME_LOWER: output_spatial_shape[i] = floor((input_spatial_shape[i] - 1) / strides_spatial_shape[i]) + 1
+ ```
+ And pad shape will be following if `SAME_UPPER` or `SAME_LOWER`:
+ ```
+ pad_shape[i] = (output_spatial_shape[i] - 1) * strides_spatial_shape[i] + {kernelSpatialShape} - input_spatial_shape[i]
+ ```
+ {additionalDescription}
+ )DOC";
+        ReplaceAll(doc, "{name}", name);
+        ReplaceAll(doc, "{opName}", opName);
+        ReplaceAll(doc, "{additionalDescription}", additionalDescription);
+        ReplaceAll(
+            doc,
+            "{kernelSpatialShape}",
+            use_dilation ? "((kernel_spatial_shape[i] - 1) * dilations[i] + 1)" : "kernel_spatial_shape[i]"););
+    schema.SetDoc(doc);
+    schema.Attr("kernel_shape", "The size of the kernel along each axis.", AttributeProto::INTS);
+    schema.Attr(
+        "strides",
+        "Stride along each spatial axis. If not present, the stride defaults to 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr("auto_pad", conv_auto_pad_doc, AttributeProto::STRING, std::string("NOTSET"));
+    schema.Attr("pads", pads_doc, AttributeProto::INTS, OPTIONAL_VALUE);
+    schema.Attr(
+        "ceil_mode",
+        "Whether to use ceil or floor (default) to compute the output shape.",
+        AttributeProto::INT,
+        static_cast<int64_t>(0));
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from the previous operator; "
+        "dimensions for image case are (N x C x H x W), "
+        "where N is the batch size, C is the number of "
+        "channels, and H and W are the height and the "
+        "width of the data. For non image case, the "
+        "dimensions are in the form of "
+        "(N x C x D1 x D2 ... Dn), where N is the batch "
+        "size. Optionally, if dimension denotation is "
+        "in effect, the operation expects the input "
+        "data tensor to arrive with the dimension denotation "
+        "of [DATA_BATCH, DATA_CHANNEL, DATA_FEATURE, DATA_FEATURE ...].",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Output(
+        0,
+        "Y",
+        "Output data tensor from average or max pooling across "
+        "the input tensor. Dimensions will vary based "
+        "on various kernel, stride, and pad sizes. Floor value of "
+        "the dimension is used",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint(
+        "T",
+        GetSupportedDataTypesForPoolingOps(supports8bit),
+        supports8bit ? "Constrain input and output types to float and 8 bit tensors."
+                     : "Constrain input and output types to float tensors.");
+    schema.TypeAndShapeInferenceFunction([use_dilation](InferenceContext& ctx) {
+      propagateElemTypeFromInputToOutput(ctx, 0, 0);
+      if (ctx.getNumOutputs() > 1) {
+        // MaxPool with two outputs case.
+        auto output_type = ctx.getOutputType(1);
+        if (output_type->value_case() == TypeProto::kTensorType ||
+            output_type->value_case() == TypeProto::VALUE_NOT_SET) {
+          output_type->mutable_tensor_type()->set_elem_type(TensorProto::INT64);
+        }
+      }
+      convPoolShapeInference(ctx, use_dilation, true, 0, 1);
+    });
+  };
+}
+
+ONNX_OPERATOR_SET_SCHEMA(
+    AveragePool,
+    22,
+    OpSchema()
+        .FillUsing(PoolOpSchemaGenerator(
+            "AveragePool",
+            "average",
+            "The output of each pooling window is divided by the number of elements (exclude pad when attribute count_include_pad is zero).",
+            true, /* use_dilation: dilations attribute has been added in opset 19. */
+            false /* supports8bit: does not support 8bit. */))
+        .Attr(
+            "dilations",
+            "Dilation value along each spatial axis of filter. If not present, the dilation defaults to 1 along each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "count_include_pad",
+            "Whether include pad pixels when calculating values for the edges. Default is 0, doesn't count include pad.",
+            AttributeProto::INT,
+            static_cast<int64_t>(0)));
+
+ONNX_OPERATOR_SET_SCHEMA(
+    MaxPool,
+    22,
+    OpSchema()
+        .FillUsing(PoolOpSchemaGenerator(
+            "MaxPool",
+            "max",
+            "The output of each pooling window is maximum number of elements exclude pad. ",
+            true,
+            true))
+        .Attr(
+            "storage_order",
+            "The storage order of the tensor. 0 is row major, and 1 is column major. "
+            "This attribute is used only to convert an n-tuple index value into "
+            "a single integer value for producing the second output. ",
+            AttributeProto::INT,
+            static_cast<int64_t>(0))
+        .Attr(
+            "dilations",
+            "Dilation value along each spatial axis of filter. If not present, the dilation defaults to 1 along each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Output(
+            1,
+            "Indices",
+            "Indices tensor from max pooling across the input tensor. "
+            "The dimensions of indices are the same as output tensor. "
+            "The values in indices of are the indices of the selected values during pooling. "
+            "The indices are computed as flatten 1-D tensor, "
+            "and the indices do not consider padding. "
+            "So the values in indices are in [0, N x C x D1 x ... x Dn).",
+            "I",
+            OpSchema::Optional,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .TypeConstraint("I", {"tensor(int64)"}, "Constrain index tensor to int64"));
+
+static void maxUnpoolShapeInference(InferenceContext& ctx) {
+  // we need at least two inputs to have a shape for this inference.
+  if (ctx.getNumInputs() != 2 && ctx.getNumInputs() != 3) {
+    fail_type_inference("MaxUnpool op must have either two or three inputs.");
+  }
+  propagateElemTypeFromInputToOutput(ctx, 0, 0);
+  if (!hasInputShape(ctx, 0)) {
+    return; // If first input does not have shape, we cannot infer much.
+  }
+  auto input_shape = ctx.getInputType(0)->tensor_type().shape();
+  if (input_shape.dim_size() < 2) {
+    fail_shape_inference("Input tensor X must have at least 2 dimensions.");
+  }
+
+  // first dim is the batch axis and the next is the number of channels.
+  size_t n_input_dims = static_cast<size_t>(input_shape.dim_size() - 2);
+
+  std::vector<int64_t> pads;
+  if (getRepeatedAttribute(ctx, "pads", pads)) {
+    if (pads.size() != n_input_dims * 2) {
+      fail_shape_inference("Attribute pads has incorrect size.");
+    }
+  } else {
+    pads.assign(n_input_dims * 2, 0);
+  }
+
+  std::vector<int64_t> strides;
+  if (getRepeatedAttribute(ctx, "strides", strides)) {
+    if (strides.size() != n_input_dims) {
+      fail_shape_inference("Attribute strides has incorrect size.");
+    }
+  } else {
+    strides.assign(n_input_dims, 1);
+  }
+
+  std::vector<int64_t> kernel_shape;
+  if (getRepeatedAttribute(ctx, "kernel_shape", kernel_shape)) {
+    if (kernel_shape.size() != n_input_dims) {
+      fail_shape_inference("Attribute kernel_shape has incorrect size.");
+    }
+  } else {
+    fail_shape_inference("Attribute kernel_shape must be specified.");
+  }
+
+  if (ctx.getNumInputs() == 3) {
+    // If the third input, output_size, is specified, then use that instead
+    // of inferring shape from inputs.
+    if (hasInputShape(ctx, 2)) {
+      auto& output_shape = getInputShape(ctx, 2);
+      if (output_shape.dim_size() != 1) {
+        fail_type_inference("'output_shape' must be rank 1 tensor.");
+      }
+      if (output_shape.dim(0).has_dim_value() &&
+          static_cast<int>(output_shape.dim(0).dim_value()) != input_shape.dim_size()) {
+        fail_shape_inference("'output_shape' must have same number of elements as the shape of input tensor X.");
+      }
+    }
+    return; // 'output_shape' is specified as input. Actual shape will be
+            // determined at runtime.
+  }
+
+  auto final_output_shape = ctx.getOutputType(0)->mutable_tensor_type()->mutable_shape();
+
+  *final_output_shape->add_dim() = input_shape.dim(0);
+  *final_output_shape->add_dim() =
+      ctx.getInputType(1)->tensor_type().shape().dim(1); // channels should be the second dim of second input.
+
+  int kernel_shape_size = static_cast<int>(kernel_shape.size());
+  for (int i = 0; i < kernel_shape_size; ++i) {
+    auto newdim = final_output_shape->add_dim();
+    if (!input_shape.dim(2 + i).has_dim_value()) {
+      continue;
+    }
+
+    int64_t newdim_value = strides[i] * (input_shape.dim(2 + i).dim_value() - 1);
+    newdim_value += kernel_shape[i];
+    newdim_value -= pads[i];
+    newdim_value -= pads[i + kernel_shape_size];
+
+    // add in the initial position
+    newdim->set_dim_value(newdim_value);
+  }
+}
+
+static constexpr const char* MaxUnpool_ver22_doc = R"DOC(
+MaxUnpool essentially computes the partial inverse of the MaxPool op.
+ The input information to this op is typically the output information from a MaxPool op. The first
+ input tensor X is the tensor that needs to be unpooled, which is typically the pooled tensor (first output)
+ from MaxPool. The second input tensor, I, contains the indices to the (locally maximal) elements corresponding
+ to the elements in the first input tensor X. Input tensor I is typically the second output of the MaxPool op.
+ The third (optional) input is a tensor that specifies the output size of the unpooling operation.
+
+MaxUnpool is intended to do 'partial' inverse of the MaxPool op. 'Partial' because all the non-maximal
+ values from the original input to MaxPool are set to zero in the output of the MaxUnpool op. Pooling
+ the result of an unpooling operation should give back the original input to the unpooling op.
+
+MaxUnpool can produce the same output size for several input sizes, which makes unpooling op ambiguous.
+ The third input argument, output_size, is meant to disambiguate the op and produce output tensor of
+ known/predictable size.
+
+In addition to the inputs, MaxUnpool takes three attributes, namely kernel_shape, strides, and pads,
+ which define the exact unpooling op. The attributes typically have the same values as the corresponding
+ pooling op that the unpooling op is trying to invert.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    MaxUnpool,
+    22,
+    OpSchema()
+        .SetDoc(MaxUnpool_ver22_doc)
+        .Attr("kernel_shape", "The size of the kernel along each axis.", AttributeProto::INTS)
+        .Attr(
+            "strides",
+            "Stride along each spatial axis. If not present, the stride defaults to 1 along each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr("pads", pads_doc, AttributeProto::INTS, OPTIONAL_VALUE)
+        .Input(
+            0,
+            "X",
+            "Input data tensor that has to be unpooled. "
+            "This tensor is typically the first output of the MaxPool op."
+            "Dimensions for image case are (N x C x H x W), "
+            "where N is the batch size, C is the number of "
+            "channels, and H and W are the height and the "
+            "width of the data. For non-image case, the "
+            "dimensions are in the form of "
+            "(N x C x D1 x D2 ... Dn), where N is the batch "
+            "size. Optionally, if dimension denotation is "
+            "in effect, the operation expects the input "
+            "data tensor to arrive with the dimension denotation "
+            "of [DATA_BATCH, DATA_CHANNEL, DATA_FEATURE, DATA_FEATURE ...].",
+            "T1",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(
+            1,
+            "I",
+            "Input data tensor containing the indices corresponding to "
+            "elements in the first input tensor X."
+            "This tensor is typically the second output of the MaxPool op."
+            "Dimensions must be the same as input tensor X. "
+            "The indices are linear, i.e. computed considering the tensor as flattened 1-D tensor, "
+            "assuming row-major storage. Also, the linear indices should not consider padding. "
+            "So the values in indices are in the range [0, N x C x D1 x ... x Dn).",
+            "T2",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Input(
+            2,
+            "output_shape",
+            "The shape of the output can be explicitly set which will cause pads values to be auto generated. If 'output_shape' is specified, "
+            "'pads' values are ignored.",
+            "T2",
+            OpSchema::Optional,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Output(
+            0,
+            "output",
+            "Output data tensor that contains the result of the unpooling.",
+            "T1",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .TypeConstraint("T1", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.")
+        .TypeConstraint("T2", {"tensor(int64)"}, "Constrain index tensor to int64")
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) { maxUnpoolShapeInference(ctx); }));
+
+static std::function<void(OpSchema&)> LpPoolOpSchemaGenerator(const char* name) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+ {name} consumes an input tensor X and applies Lp pooling across
+ the tensor according to kernel sizes, stride sizes, and pad lengths.
+ Lp pooling consisting of computing the Lp norm on all values of a subset
+ of the input tensor according to the kernel size and downsampling the
+ data into the output tensor Y for further processing. The output spatial shape will be following:
+ ```
+ output_spatial_shape[i] = floor((input_spatial_shape[i] + pad_shape[i] - {kernelSpatialShape}) / strides_spatial_shape[i] + 1)
+ ```
+ or
+ ```
+ output_spatial_shape[i] = ceil((input_spatial_shape[i] + pad_shape[i] - {kernelSpatialShape}) / strides_spatial_shape[i] + 1)
+ ```
+ if ceil_mode is enabled `pad_shape[i]` is the sum of pads along axis `i`.
+
+ `auto_pad` is a DEPRECATED attribute. If you are using them currently, the output spatial shape will be following:
+ ```
+ VALID: output_spatial_shape[i] = ceil((input_spatial_shape[i] - {kernelSpatialShape} + 1) / strides_spatial_shape[i])
+ SAME_UPPER or SAME_LOWER: output_spatial_shape[i] = ceil(input_spatial_shape[i] / strides_spatial_shape[i])
+ ```
+ And pad shape will be following if `SAME_UPPER` or `SAME_LOWER`:
+ ```
+ pad_shape[i] = (output_spatial_shape[i] - 1) * strides_spatial_shape[i] + {kernelSpatialShape} - input_spatial_shape[i]
+ ```)DOC";
+        ReplaceAll(doc, "{name}", name););
+    schema.SetDoc(doc);
+    schema.Attr("kernel_shape", "The size of the kernel along each axis.", AttributeProto::INTS);
+    schema.Attr(
+        "strides",
+        "Stride along each spatial axis. If not present, the stride defaults to 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "dilations",
+        "dilation value along each spatial axis of the filter. If not present, the dilation defaults is 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr("auto_pad", conv_auto_pad_doc, AttributeProto::STRING, std::string("NOTSET"));
+    schema.Attr("pads", pads_doc, AttributeProto::INTS, OPTIONAL_VALUE);
+    schema.Attr(
+        "p", "p value of the Lp norm used to pool over the input data.", AttributeProto::INT, static_cast<int64_t>(2));
+    schema.Attr(
+        "ceil_mode",
+        "Whether to use ceil or floor (default) to compute the output shape.",
+        AttributeProto::INT,
+        static_cast<int64_t>(0));
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from the previous operator; "
+        "dimensions for image case are (N x C x H x W), "
+        "where N is the batch size, C is the number of "
+        "channels, and H and W are the height and the "
+        "width of the data. For non image case, the "
+        "dimensions are in the form of "
+        "(N x C x D1 x D2 ... Dn), where N is the "
+        "batch size.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Output(
+        0,
+        "Y",
+        "Output data tensor from Lp pooling across the input "
+        "tensor. Dimensions will vary based on various kernel, stride, and pad "
+        "sizes.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.");
+    schema.TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+      propagateElemTypeFromInputToOutput(ctx, 0, 0);
+      convPoolShapeInference(ctx, true, true, 0, 1);
+    });
+  };
+}
+
+ONNX_OPERATOR_SET_SCHEMA(LpPool, 22, OpSchema().FillUsing(LpPoolOpSchemaGenerator("LpPool")));
+
+// For ROI pool operations.
+static void roiPoolTypeShapeInference(InferenceContext& ctx) {
+  propagateElemTypeFromInputToOutput(ctx, 0, 0);
+
+  // rois is the second input.
+  if (!hasNInputShapes(ctx, 2)) {
+    return;
+  }
+
+  auto input_shape = ctx.getInputType(0)->tensor_type().shape();
+  auto rios_shape = ctx.getInputType(1)->tensor_type().shape();
+
+  if (input_shape.dim_size() < 2) {
+    fail_shape_inference("Input tensor must have at least 2 dimensions");
+  }
+  if (rios_shape.dim_size() != 2) {
+    fail_shape_inference("RoIs tensor must have 2 dimensions");
+  }
+
+  // first dim is the batch axis and the next is the number of channels.
+  size_t n_input_dims = static_cast<size_t>(input_shape.dim_size() - 2);
+
+  std::vector<int64_t> pooled_shape;
+  if (getRepeatedAttribute(ctx, "pooled_shape", pooled_shape)) {
+    if (pooled_shape.size() != n_input_dims) {
+      fail_shape_inference("Attribute pooled_shape has incorrect length");
+    }
+  } else {
+    fail_shape_inference("Attribute pooled_shape must be specified");
+  }
+
+  // (num_rois, channels, pooled_shape[0], pooled_shape[1])
+  auto output_shape = ctx.getOutputType(0)->mutable_tensor_type()->mutable_shape();
+
+  *output_shape->add_dim() = rios_shape.dim(0);
+  *output_shape->add_dim() = input_shape.dim(1);
+  output_shape->add_dim()->set_dim_value(pooled_shape[0]);
+  output_shape->add_dim()->set_dim_value(pooled_shape[1]);
+}
+
+static std::function<void(OpSchema&)> RoiPoolOpSchemaGenerator(const char* name) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+ ROI {name} pool consumes an input tensor X and region of interests (RoIs) to
+ apply {name} pooling across each RoI, to produce output 4-D tensor of shape
+ (num_rois, channels, pooled_shape[0], pooled_shape[1]).)DOC";
+        ReplaceAll(doc, "{name}", name););
+    schema.SetDoc(doc);
+    schema.Attr("pooled_shape", "ROI pool output shape (height, width).", AttributeProto::INTS);
+    schema.Attr(
+        "spatial_scale",
+        "Multiplicative spatial scale factor to translate ROI coordinates from their input scale to the scale used when pooling.",
+        AttributeProto::FLOAT,
+        1.f);
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from the previous operator; "
+        "dimensions for image case are (N x C x H x W), "
+        "where N is the batch size, C is the number of "
+        "channels, and H and W are the height and the "
+        "width of the data.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Input(
+        1,
+        "rois",
+        "RoIs (Regions of Interest) to pool over. Should "
+        "be a 2-D tensor of shape (num_rois, 5) given as "
+        "[[batch_id, x1, y1, x2, y2], ...].",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::NonDifferentiable);
+    schema.Output(
+        0,
+        "Y",
+        "RoI pooled output 4-D tensor of shape (num_rois, channels, pooled_shape[0], pooled_shape[1]).",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.");
+    schema.TypeAndShapeInferenceFunction([](InferenceContext& ctx) { roiPoolTypeShapeInference(ctx); });
+  };
+}
+
+ONNX_OPERATOR_SET_SCHEMA(MaxRoiPool, 22, OpSchema().FillUsing(RoiPoolOpSchemaGenerator("max")));
+
+static std::function<void(OpSchema&)> ConvOpSchemaGenerator(const char* filter_desc) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+The convolution operator consumes an input tensor and {filter_desc}, and
+computes the output.)DOC";
+        ReplaceAll(doc, "{filter_desc}", filter_desc););
+    schema.SetDoc(doc);
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from previous layer; "
+        "has size (N x C x H x W), where N is the batch size, "
+        "C is the number of channels, and H and W are the "
+        "height and width. Note that this is for the 2D image. "
+        "Otherwise the size is (N x C x D1 x D2 ... x Dn). "
+        "Optionally, if dimension denotation is "
+        "in effect, the operation expects input data tensor "
+        "to arrive with the dimension denotation of [DATA_BATCH, "
+        "DATA_CHANNEL, DATA_FEATURE, DATA_FEATURE ...].",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Input(
+        1,
+        "W",
+        "The weight tensor that will be used in the "
+        "convolutions; has size (M x C/group x kH x kW), where C "
+        "is the number of channels, and kH and kW are the "
+        "height and width of the kernel, and M is the number "
+        "of feature maps. For more than 2 dimensions, the "
+        "kernel shape will be (M x C/group x k1 x k2 x ... x kn), "
+        "where (k1 x k2 x ... kn) is the dimension of the kernel. "
+        "Optionally, if dimension denotation is in effect, "
+        "the operation expects the weight tensor to arrive "
+        "with the dimension denotation of [FILTER_OUT_CHANNEL, "
+        "FILTER_IN_CHANNEL, FILTER_SPATIAL, FILTER_SPATIAL ...]. "
+        "Assuming zero based indices for the shape array, "
+        "X.shape[1] == (W.shape[1] * group) == C and "
+        "W.shape[0] mod G == 0. Or in other words "
+        "FILTER_IN_CHANNEL multiplied by the number of groups "
+        "should be equal to DATA_CHANNEL and the number of "
+        "feature maps M should be a multiple of the number of "
+        "groups G.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Input(
+        2,
+        "B",
+        "Optional 1D bias to be added to the convolution, has size of M.",
+        "T",
+        OpSchema::Optional,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Output(
+        0,
+        "Y",
+        "Output data tensor that contains the result of the "
+        "convolution. The output dimensions are functions "
+        "of the kernel size, stride size, and pad lengths.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.");
+    schema.Attr(
+        "kernel_shape",
+        "The shape of the convolution kernel. If not present, should be inferred from input W.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "dilations",
+        "dilation value along each spatial axis of the filter. If not present, the dilation defaults is 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "strides",
+        "Stride along each spatial axis. If not present, the stride defaults is 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr("auto_pad", conv_auto_pad_doc, AttributeProto::STRING, std::string("NOTSET"));
+    schema.Attr("pads", pads_doc, AttributeProto::INTS, OPTIONAL_VALUE);
+    schema.Attr(
+        "group",
+        "number of groups input channels and output channels are divided into.",
+        AttributeProto::INT,
+        static_cast<int64_t>(1));
+    schema.TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+      propagateElemTypeFromInputToOutput(ctx, 0, 0);
+      convPoolShapeInference(ctx, true, false, 0, 1);
+    });
+  };
+}
+
+ONNX_OPERATOR_SET_SCHEMA(Conv, 22, OpSchema().FillUsing(ConvOpSchemaGenerator("a filter")));
+
+static constexpr const char* QLinearConv_ver10_doc = R"DOC(
+The convolution operator consumes a quantized input tensor, its scale and zero point,
+a quantized filter, its scale and zero point, and output's scale and zero point,
+and computes the quantized output. Each scale and zero-point pair must have same shape.
+It means they must be either scalars (per tensor) or 1-D tensors (per output channel).
+Each input or output and its related zero point must have same type.
+When bias is present it must be quantized using scale = input scale * weight scale and
+zero point as 0.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    QLinearConv,
+    10,
+    OpSchema()
+        .SetDoc(QLinearConv_ver10_doc)
+        .Input(
+            0,
+            "x",
+            "Input data tensor from previous layer; "
+            "has size (N x C x H x W), where N is the batch size, "
+            "C is the number of channels, and H and W are the "
+            "height and width. Note that this is for the 2D image. "
+            "Otherwise the size is (N x C x D1 x D2 ... x Dn). "
+            "Optionally, if dimension denotation is "
+            "in effect, the operation expects input data tensor "
+            "to arrive with the dimension denotation of [DATA_BATCH, "
+            "DATA_CHANNEL, DATA_FEATURE, DATA_FEATURE ...].",
+            "T1")
+        .Input(
+            1,
+            "x_scale",
+            "Scale tensor for input 'x'. It's a scalar, which means a per-tensor/layer quantization.",
+            "tensor(float)")
+        .Input(
+            2,
+            "x_zero_point",
+            "Zero point tensor for input 'x'. It's a scalar, which means a per-tensor/layer quantization.",
+            "T1")
+        .Input(
+            3,
+            "w",
+            "The weight tensor that will be used in the "
+            "convolutions; has size (M x C/group x kH x kW), where C "
+            "is the number of channels, and kH and kW are the "
+            "height and width of the kernel, and M is the number "
+            "of feature maps. For more than 2 dimensions, the "
+            "kernel shape will be (M x C/group x k1 x k2 x ... x kn), "
+            "where (k1 x k2 x ... kn) is the dimension of the kernel. "
+            "Optionally, if dimension denotation is in effect, "
+            "the operation expects the weight tensor to arrive "
+            "with the dimension denotation of [FILTER_OUT_CHANNEL, "
+            "FILTER_IN_CHANNEL, FILTER_SPATIAL, FILTER_SPATIAL ...]. "
+            "X.shape[1] == (W.shape[1] * group) == C "
+            "(assuming zero based indices for the shape array). "
+            "Or in other words FILTER_IN_CHANNEL should be equal to DATA_CHANNEL. ",
+            "T2")
+        .Input(
+            4,
+            "w_scale",
+            "Scale tensor for input 'w'. It could be a scalar or a 1-D tensor, which means a per-tensor/layer or per output channel quantization. If it's a 1-D tensor, its number of elements should be equal to the number of output channels (M).",
+            "tensor(float)")
+        .Input(
+            5,
+            "w_zero_point",
+            "Zero point tensor for input 'w'. It could be a scalar or a 1-D tensor, which means a per-tensor/layer or per output channel quantization. If it's a 1-D tensor, its number of elements should be equal to the number of output channels (M).",
+            "T2")
+        .Input(
+            6,
+            "y_scale",
+            "Scale tensor for output 'y'. It's a scalar, which means a per-tensor/layer quantization.",
+            "tensor(float)")
+        .Input(
+            7,
+            "y_zero_point",
+            "Zero point tensor for output 'y'. It's a scalar, which means a per-tensor/layer quantization.",
+            "T3")
+        .Input(
+            8,
+            "B",
+            "Optional 1D bias to be added to the convolution, has size of M. "
+            "Bias must be quantized using scale = x_scale * w_scale and zero_point = 0",
+            "T4",
+            OpSchema::Optional)
+        .Output(
+            0,
+            "y",
+            "Output data tensor that contains the result of the "
+            "convolution. The output dimensions are functions "
+            "of the kernel size, stride size, and pad lengths.",
+            "T3")
+        .TypeConstraint("T1", {"tensor(int8)", "tensor(uint8)"}, "Constrain input type to 8-bit integer tensor.")
+        .TypeConstraint("T2", {"tensor(int8)", "tensor(uint8)"}, "Constrain filter type to 8-bit integer tensor.")
+        .TypeConstraint("T3", {"tensor(int8)", "tensor(uint8)"}, "Constrain output type to 8-bit integer tensor.")
+        .TypeConstraint("T4", {"tensor(int32)"}, "Constrain bias type to 32-bit integer tensor.")
+        .Attr("auto_pad", conv_auto_pad_doc, AttributeProto::STRING, std::string("NOTSET"))
+        .Attr(
+            "kernel_shape",
+            "The shape of the convolution kernel. If not present, should be inferred from input 'w'.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "dilations",
+            "dilation value along each spatial axis of the filter. If not present, the dilation defaults to 1 along each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "strides",
+            "Stride along each spatial axis. If not present, the stride defaults to 1 along each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "pads",
+            "Padding for the beginning and ending along each spatial axis, it can take any value greater than or equal to 0."
+            "The value represent the number of pixels added to the beginning and end part of the corresponding axis."
+            "`pads` format should be as follow [x1_begin, x2_begin...x1_end, x2_end,...], where xi_begin the number of"
+            "pixels added at the beginning of axis `i` and xi_end, the number of pixels added at the end of axis `i`."
+            "This attribute cannot be used simultaneously with auto_pad attribute. If not present, the padding defaults"
+            "to 0 along start and end of each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "group",
+            "number of groups input channels and output channels are divided into. default is 1.",
+            AttributeProto::INT,
+            static_cast<int64_t>(1))
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          auto x_type = ctx.getInputType(0);
+          auto w_type = ctx.getInputType(3);
+          if (nullptr == x_type || nullptr == w_type || x_type->value_case() != TypeProto::kTensorType ||
+              w_type->value_case() != TypeProto::kTensorType) {
+            fail_type_inference("inputs are expected to have tensor type in ", ctx.getDisplayName(), ".");
+          }
+
+          auto x_zero_point_type = ctx.getInputType(2);
+          if (nullptr == x_zero_point_type ||
+              x_zero_point_type->tensor_type().elem_type() != x_type->tensor_type().elem_type()) {
+            fail_type_inference(
+                "input and zero_point pair is expected to have be same type in ", ctx.getDisplayName(), ".");
+          }
+
+          auto w_zero_point_type = ctx.getInputType(5);
+          if (nullptr == w_zero_point_type ||
+              w_zero_point_type->tensor_type().elem_type() != w_type->tensor_type().elem_type()) {
+            fail_type_inference(
+                "weight and zero_point pair is expected to have same type in ", ctx.getDisplayName(), ".");
+          }
+
+          propagateElemTypeFromInputToOutput(ctx, 7, 0);
+
+          convPoolShapeInference(ctx, true, false, 0, 3);
+        }));
+
+static constexpr const char* ConvInteger_ver10_doc = R"DOC(
+The integer convolution operator consumes an input tensor, its zero-point, a filter, and its zero-point,
+and computes the output. The production MUST never overflow. The accumulation may overflow if and only if in 32 bits.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    ConvInteger,
+    10,
+    OpSchema()
+        .SetDoc(ConvInteger_ver10_doc)
+        .Input(
+            0,
+            "x",
+            "Input data tensor from previous layer; "
+            "has size (N x C x H x W), where N is the batch size, "
+            "C is the number of channels, and H and W are the "
+            "height and width. Note that this is for the 2D image. "
+            "Otherwise the size is (N x C x D1 x D2 ... x Dn). "
+            "Optionally, if dimension denotation is "
+            "in effect, the operation expects input data tensor "
+            "to arrive with the dimension denotation of [DATA_BATCH, "
+            "DATA_CHANNEL, DATA_FEATURE, DATA_FEATURE ...].",
+            "T1")
+        .Input(
+            1,
+            "w",
+            "The weight tensor that will be used in the "
+            "convolutions; has size (M x C/group x kH x kW), where C "
+            "is the number of channels, and kH and kW are the "
+            "height and width of the kernel, and M is the number "
+            "of feature maps. For more than 2 dimensions, the "
+            "kernel shape will be (M x C/group x k1 x k2 x ... x kn), "
+            "where (k1 x k2 x ... kn) is the dimension of the kernel. "
+            "Optionally, if dimension denotation is in effect, "
+            "the operation expects the weight tensor to arrive "
+            "with the dimension denotation of [FILTER_OUT_CHANNEL, "
+            "FILTER_IN_CHANNEL, FILTER_SPATIAL, FILTER_SPATIAL ...]. "
+            "X.shape[1] == (W.shape[1] * group) == C "
+            "(assuming zero based indices for the shape array). "
+            "Or in other words FILTER_IN_CHANNEL should be equal to DATA_CHANNEL. ",
+            "T2")
+        .Input(
+            2,
+            "x_zero_point",
+            "Zero point tensor for input 'x'. It's optional and default value is 0. It's a scalar, which means a per-tensor/layer quantization.",
+            "T1",
+            OpSchema::Optional)
+        .Input(
+            3,
+            "w_zero_point",
+            "Zero point tensor for input 'w'. It's optional and default value is 0.  It could be a scalar or a 1-D tensor, "
+            "which means a per-tensor/layer or per output channel quantization. If it's a 1-D tensor, its number "
+            "of elements should be equal to the number of output channels (M)",
+            "T2",
+            OpSchema::Optional)
+        .Output(
+            0,
+            "y",
+            "Output data tensor that contains the result of the "
+            "convolution. The output dimensions are functions "
+            "of the kernel size, stride size, and pad lengths.",
+            "T3")
+        .TypeConstraint(
+            "T1",
+            {"tensor(int8)", "tensor(uint8)"},
+            "Constrain input x and its zero point data type to 8-bit integer tensor.")
+        .TypeConstraint(
+            "T2",
+            {"tensor(int8)", "tensor(uint8)"},
+            "Constrain input w and its zero point data type to 8-bit integer tensor.")
+        .TypeConstraint("T3", {"tensor(int32)"}, "Constrain output y data type to 32-bit integer tensor.")
+        .Attr("auto_pad", conv_auto_pad_doc, AttributeProto::STRING, std::string("NOTSET"))
+        .Attr(
+            "kernel_shape",
+            "The shape of the convolution kernel. If not present, should be inferred from input 'w'.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "dilations",
+            "dilation value along each spatial axis of the filter. If not present, the dilation defaults to 1 along each axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "strides",
+            "Stride along each spatial axis. If not present, the stride defaults to 1 along each axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "pads",
+            "Padding for the beginning and ending along each spatial axis, it can take any value greater than or equal to 0."
+            "The value represent the number of pixels added to the beginning and end part of the corresponding axis."
+            "`pads` format should be as follow [x1_begin, x2_begin...x1_end, x2_end,...], where xi_begin the number of"
+            "pixels added at the beginning of axis `i` and xi_end, the number of pixels added at the end of axis `i`."
+            "This attribute cannot be used simultaneously with auto_pad attribute. If not present, the padding defaults"
+            "to 0 along start and end of each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "group",
+            "number of groups input channels and output channels are divided into. default is 1.",
+            AttributeProto::INT,
+            static_cast<int64_t>(1))
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          auto x_type = ctx.getInputType(0);
+          auto w_type = ctx.getInputType(1);
+          auto y_type = ctx.getOutputType(0);
+          if (nullptr == x_type || nullptr == w_type || nullptr == y_type ||
+              x_type->value_case() != TypeProto::kTensorType || w_type->value_case() != TypeProto::kTensorType) {
+            fail_type_inference("inputs are expected to have tensor type and output type should not be null.");
+          }
+
+          // Right now we only support int32
+          y_type->mutable_tensor_type()->set_elem_type(TensorProto::INT32);
+
+          convPoolShapeInference(ctx, true, false, 0, 1);
+        }));
+
+ONNX_API void convTransposeShapeInference(InferenceContext& ctx) {
+  propagateElemTypeFromInputToOutput(ctx, 0, 0);
+
+  // we need at least two inputs to have a shape for this inference.
+  if (!hasNInputShapes(ctx, 2)) {
+    return;
+  }
+
+  int64_t group = getAttribute(ctx, "group", 1);
+
+  auto input_shape = ctx.getInputType(0)->tensor_type().shape();
+  if (input_shape.dim_size() < 2) {
+    return; // Input tensor should have at least two dimensions.
+  }
+
+  // first dim is the batch axis and the next is the number of channels.
+  size_t n_input_dims = static_cast<size_t>(input_shape.dim_size() - 2);
+
+  std::vector<int64_t> dilations;
+  if (getRepeatedAttribute(ctx, "dilations", dilations)) {
+    if (dilations.size() != n_input_dims) {
+      return;
+    }
+  } else {
+    dilations.assign(n_input_dims, 1);
+  }
+
+  std::vector<int64_t> strides;
+  if (getRepeatedAttribute(ctx, "strides", strides)) {
+    if (strides.size() != n_input_dims) {
+      return;
+    }
+  } else {
+    strides.assign(n_input_dims, 1);
+  }
+
+  std::vector<int64_t> kernel_shape;
+  if (getRepeatedAttribute(ctx, "kernel_shape", kernel_shape)) {
+    if (kernel_shape.size() != n_input_dims) {
+      return;
+    }
+  } else {
+    auto second_input_shape = ctx.getInputType(1)->tensor_type().shape();
+    for (int i = 2; i < second_input_shape.dim_size(); ++i) {
+      if (!second_input_shape.dim(i).has_dim_value()) {
+        return;
+      }
+      kernel_shape.push_back(second_input_shape.dim(i).dim_value());
+    }
+  }
+
+  std::vector<int64_t> effective_kernel_shape = kernel_shape;
+  for (size_t i = 0; i < kernel_shape.size(); i++) {
+    // accounting for dilation, how big is the kernel in this dimension
+    effective_kernel_shape[i] = (effective_kernel_shape[i] - 1) * dilations[i] + 1;
+  }
+
+  std::vector<int64_t> pads;
+  if (getRepeatedAttribute(ctx, "pads", pads)) {
+    if (pads.size() != n_input_dims * 2) {
+      fail_shape_inference("Attribute pads has incorrect size");
+    }
+    const auto* auto_pad_attr = ctx.getAttribute("auto_pad");
+    if (nullptr != auto_pad_attr && auto_pad_attr->s() != "NOTSET") {
+      fail_shape_inference("The pads attribute cannot be used simultaneously with auto_pad attribute");
+    }
+  } else {
+    pads.assign(n_input_dims * 2, 0);
+    const auto* auto_pad_attr = ctx.getAttribute("auto_pad");
+    if ((nullptr != auto_pad_attr) && (auto_pad_attr->s() != "VALID")) {
+      int input_dims_size = static_cast<int>(n_input_dims);
+      for (int i = 0; i < input_dims_size; ++i) {
+        int64_t total_pad = effective_kernel_shape[i] - strides[i];
+        if (total_pad < 0)
+          total_pad = 0;
+        int64_t half_pad_small = total_pad >> 1;
+        int64_t half_pad_big = total_pad - half_pad_small;
+        if (auto_pad_attr->s() == "SAME_UPPER") {
+          pads[i] = half_pad_small;
+          pads[i + input_dims_size] = half_pad_big;
+        } else if (auto_pad_attr->s() == "SAME_LOWER") {
+          pads[i] = half_pad_big;
+          pads[i + input_dims_size] = half_pad_small;
+        }
+      }
+    }
+  }
+
+  std::vector<int64_t> output_shape;
+  bool output_shape_presented = true;
+  if (getRepeatedAttribute(ctx, "output_shape", output_shape)) {
+    if (output_shape.size() != n_input_dims) {
+      return;
+    }
+  } else {
+    output_shape_presented = false;
+  }
+
+  std::vector<int64_t> output_padding;
+  if (getRepeatedAttribute(ctx, "output_padding", output_padding)) {
+    if (output_padding.size() != n_input_dims) { // Added only to one side.
+      return;
+    }
+  } else {
+    output_padding.assign(n_input_dims, 0);
+  }
+
+  auto final_output_shape = ctx.getOutputType(0)->mutable_tensor_type()->mutable_shape();
+
+  *final_output_shape->add_dim() = input_shape.dim(0);
+  *final_output_shape->add_dim() =
+      ctx.getInputType(1)->tensor_type().shape().dim(1) * group; // channels should be the second dim of second input
+                                                                 // multiply group.
+
+  int size_of_output = 0;
+  if (output_shape_presented) {
+    size_of_output = static_cast<int>(output_shape.size());
+    for (int i = 0; i < size_of_output; ++i) {
+      if (input_shape.dim(i + 2).has_dim_value()) {
+        if (output_shape[i] < input_shape.dim(i + 2).dim_value()) {
+          // TODO: throw exception?
+          return; // output shape value cannot be smaller than the input shape
+                  // value
+        }
+      }
+      final_output_shape->add_dim()->set_dim_value(output_shape[i]);
+    }
+    return;
+  } else {
+    size_of_output = input_shape.dim_size() - 2;
+    for (int i = 0; i < size_of_output; ++i) {
+      if (input_shape.dim(i + 2).has_dim_value()) {
+        int64_t output_shape_dim = strides[i] * (input_shape.dim(i + 2).dim_value() - 1) + output_padding[i] +
+            effective_kernel_shape[i] - pads[i] - pads[i + n_input_dims];
+        final_output_shape->add_dim()->set_dim_value(output_shape_dim);
+      } else {
+        final_output_shape->add_dim();
+      }
+    }
+    return;
+  }
+}
+
+static std::function<void(OpSchema&)> ConvTransposeOpSchemaGenerator(const char* filter_desc) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+The convolution transpose operator consumes an input tensor and {filter_desc},
+and computes the output.
+
+If the pads parameter is provided the shape of the output is calculated via the following equation:
+
+  output_shape[i] = stride[i] * (input_size[i] - 1) + output_padding[i] + ((kernel_shape[i] - 1) * dilations[i] + 1) - pads[start_i] - pads[end_i]
+
+output_shape can also be explicitly specified in which case pads values are auto generated using these equations:
+
+  total_padding[i] = stride[i] * (input_size[i] - 1) + output_padding[i] + ((kernel_shape[i] - 1) * dilations[i] + 1) - output_shape[i]
+  If (auto_pads == SAME_UPPER): pads[start_i] = total_padding[i]/2; pads[end_i] = total_padding[i] - (total_padding[i]/2)
+  Else: pads[start_i] = total_padding[i] - (total_padding[i]/2); pads[end_i] = (total_padding[i]/2).
+
+    )DOC";
+        ReplaceAll(doc, "{filter_desc}", filter_desc););
+    schema.SetDoc(doc);
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from previous layer; has size (N x C x H x W)"
+        ", where N is the batch size, C is the number of channels, and"
+        " H and W are the height and width. Note that this is for the 2D image. "
+        "Otherwise the size is (N x C x D1 x D2 ... x Dn)",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Input(
+        1,
+        "W",
+        "The weight tensor that will be used in the "
+        "convolutions; has size (C x M/group x kH x kW), where C "
+        "is the number of channels, and kH and kW are the "
+        "height and width of the kernel, and M is the number "
+        "of feature maps. For more than 2 dimensions, the "
+        "weight shape will be (C x M/group x k1 x k2 x ... x kn), "
+        "where (k1 x k2 x ... x kn) is the dimension of the kernel. "
+        "The number of channels in the output should be equal to W.shape[1] * group "
+        "(assuming zero based indices of the shape array)",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Input(
+        2,
+        "B",
+        "Optional 1D bias to be added to the convolution, has size of M.",
+        "T",
+        OpSchema::Optional,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Output(
+        0,
+        "Y",
+        "Output data tensor that contains the result of the convolution. The "
+        "output dimensions are functions of the kernel size, stride size, "
+        "pad lengths and group count. "
+        "The number of channels in the output should be equal to W.shape[1] * group "
+        "(assuming zero based indices of the shape array)",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.");
+    schema.Attr(
+        "kernel_shape",
+        "The shape of the convolution kernel. If not present, should be inferred from input W.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "output_shape",
+        "The shape of the output can be explicitly set which will cause pads values to be auto generated. If output_shape is specified "
+        "pads values are ignored. See doc for details for equations to generate pads. Note that the output_shape attribute value "
+        "should not include dimensions for batch size and channels, which are automatically inferred.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "output_padding",
+        "Additional elements added to the side with higher coordinate indices in the output. "
+        "Each padding value in \"output_padding\" must be less than the corresponding stride/dilation dimension. "
+        "By default, this attribute is a zero vector. "
+        "Note that this attribute doesn't directly affect the computed output values. "
+        "It only controls the selection of the computed values, "
+        "so changing this attribute only adds or removes output elements. "
+        "If \"output_shape\" is explicitly provided, "
+        "\"output_padding\" does not contribute additional size to \"output_shape\" but "
+        "participates in the computation of the needed padding amount. "
+        "This is also called adjs or adjustment in some frameworks.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "dilations",
+        "dilation value along each spatial axis of the filter. If not present, the dilation defaults to 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr(
+        "strides",
+        "Stride along each spatial axis. If not present, the stride defaults to 1 along each spatial axis.",
+        AttributeProto::INTS,
+        OPTIONAL_VALUE);
+    schema.Attr("auto_pad", conv_transpose_auto_pad_doc, AttributeProto::STRING, std::string("NOTSET"));
+    schema.Attr("pads", pads_doc, AttributeProto::INTS, OPTIONAL_VALUE);
+    schema.Attr(
+        "group",
+        "number of groups input channels and output channels are divided into.",
+        AttributeProto::INT,
+        static_cast<int64_t>(1));
+    schema.TypeAndShapeInferenceFunction([](InferenceContext& ctx) { convTransposeShapeInference(ctx); });
+  };
+}
+
+ONNX_OPERATOR_SET_SCHEMA(ConvTranspose, 22, OpSchema().FillUsing(ConvTransposeOpSchemaGenerator("a filter")));
+
+static constexpr const char* DeformConv_ver22_doc = R"DOC(
+Performs deformable convolution as described in https://arxiv.org/abs/1703.06211 and https://arxiv.org/abs/1811.11168.
+This operator specification supports the general N-D case. Note that most common use cases have 2D or 3D data.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    DeformConv,
+    22,
+    OpSchema()
+        .SetDoc(DeformConv_ver22_doc)
+        .Input(
+            0,
+            "X",
+            "Input data tensor. For 2D image data, it has shape (N, C, H, W) where N is the batch size, "
+            "C is the number of input channels, and H and W are the height and width. "
+            "In general, the shape is (N, C, D1, D2, ... , Dn) for n-dimensional data, where "
+            "D1 to Dn are the spatial dimension sizes. Most common use cases have n = 2 or 3.",
+            "T")
+        .Input(
+            1,
+            "W",
+            "Weight tensor that will be used in the convolutions. It has shape (oC, C/group, kH, kW), "
+            "where oC is the number of output channels and kH and kW are the kernel height and width. "
+            "For more than 2 dimensions, it has shape (oC, C/group, k1, k2, ... , kn).",
+            "T")
+        .Input(
+            2,
+            "offset",
+            "Offset tensor denoting the offset for the sampling locations in the convolution kernel. "
+            "It has shape (N, offset_group * kH * kW * 2, oH, oW) for 2D data or "
+            "(N, offset_group * k1 * k2 * ... * kn * n, o1, o2, ... , on) for nD data. Use linear interpolation"
+            "for fractional offset values. Sampling locations outside of the padded input tensor gives zero.",
+            "T")
+        .Input(
+            3,
+            "B",
+            "Optional 1D bias of length oC to be added to the convolution. Default is a tensor of zeros.",
+            "T",
+            OpSchema::Optional)
+        .Input(
+            4,
+            "mask",
+            "The mask tensor to be applied to each position in the convolution kernel. "
+            "It has shape (N, offset_group * kH * kW, oH, oW) for 2D data or "
+            "(N, offset_group * k1 * k2 * ... * kn * n, o1, o2, ... , on) for nD data. Default is a "
+            "tensor of ones.",
+            "T",
+            OpSchema::Optional)
+        .Output(
+            0,
+            "Y",
+            "Output data tensor that contains the result of convolution. It has shape (N, oC, oH, oW) "
+            "for 2D data or (N, oC, o1, o2, ..., on) for nD data",
+            "T")
+        .TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.")
+        .Attr(
+            "dilations",
+            "Dilation value along each spatial axis of the kernel. Default is 1 along each axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "group",
+            "Number of groups the input and output channels, C and oC, are divided into. C and oC must both "
+            "be divisible by group. Default is 1.",
+            AttributeProto::INT,
+            static_cast<int64_t>(1))
+        .Attr(
+            "kernel_shape",
+            "Shape of the convolution kernel. If not present, it is inferred from the shape of input W.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "offset_group",
+            "Number of groups of offset. C must be divisible by offset_group. Default is 1.",
+            AttributeProto::INT,
+            static_cast<int64_t>(1))
+        .Attr(
+            "pads",
+            "Padding for the beginning and end along each spatial axis. The values represent the number of pixels "
+            "added to the beginning and end of the corresponding axis and can take any nonnegative value. "
+            "The format should be as follows: [x1_begin, x2_begin, ..., x1_end, x2_end, ...], where xi_begin "
+            "is the number of pixels added at the beginning of axis `i` and xi_end is the number of pixels "
+            "added at the end of axis `i`. Default is 0 along each axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "strides",
+            "Stride along each spatial axis. Default is 1 along each axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          propagateElemTypeFromInputToOutput(ctx, 0, 0);
+          convPoolShapeInference(ctx, true, false, 0, 1);
+        }));
+
+// For GlobalPool operations.
+ONNX_API void globalPoolTypeShapeInference(InferenceContext& ctx) {
+  propagateElemTypeFromInputToOutput(ctx, 0, 0);
+
+  // needs at least one input with shape.
+  if (!hasNInputShapes(ctx, 1)) {
+    return;
+  }
+
+  auto input_shape = ctx.getInputType(0)->tensor_type().shape();
+  if (input_shape.dim_size() < 2) {
+    return;
+  }
+
+  // first dim is the batch axis and the next is the number of channels.
+  size_t n_input_dims = static_cast<size_t>(input_shape.dim_size() - 2);
+
+  // (N, C, 1, 1, ..., 1)
+  auto output_shape = ctx.getOutputType(0)->mutable_tensor_type()->mutable_shape();
+  *output_shape->add_dim() = input_shape.dim(0);
+  *output_shape->add_dim() = input_shape.dim(1);
+
+  for (size_t i = 0; i < n_input_dims; ++i) {
+    output_shape->add_dim()->set_dim_value(1);
+  }
+}
+
+static std::function<void(OpSchema&)> GlobalPoolingOpSchemaGenerator(const char* op_type, const char* op) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+ Global{op_type} consumes an input tensor X and applies {op} pooling across
+ the values in the same channel. This is equivalent to {op_type} with kernel size
+ equal to the spatial dimension of input tensor.)DOC";
+        ReplaceAll(doc, "{op_type}", op_type);
+        ReplaceAll(doc, "{op}", op););
+    schema.SetDoc(doc);
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from the previous operator; "
+        "dimensions for image case are (N x C x H x W), "
+        "where N is the batch size, C is the number of "
+        "channels, and H and W are the height and the width "
+        "of the data. For non image case, the dimensions are "
+        "in the form of (N x C x D1 x D2 ... Dn), "
+        "where N is the batch size.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Output(
+        0,
+        "Y",
+        "Output data tensor from pooling across the input "
+        "tensor. The output tensor has the same rank as the input. "
+        "The first two dimensions of output shape are the same as "
+        "the input (N x C), while the other dimensions are all 1.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.");
+    schema.TypeAndShapeInferenceFunction([](InferenceContext& ctx) { globalPoolTypeShapeInference(ctx); });
+  };
+}
+ONNX_OPERATOR_SET_SCHEMA(
+    GlobalAveragePool,
+    22,
+    OpSchema().FillUsing(GlobalPoolingOpSchemaGenerator("AveragePool", "average")));
+ONNX_OPERATOR_SET_SCHEMA(GlobalMaxPool, 22, OpSchema().FillUsing(GlobalPoolingOpSchemaGenerator("MaxPool", "max")));
+
+static std::function<void(OpSchema&)> GlobalLpPoolingOpSchemaGenerator(const char* op_type, const char* op) {
+  return [=](OpSchema& schema) {
+    std::string doc;
+    POPULATE_OP_DOC_STR(
+        doc = R"DOC(
+ Global{op_type} consumes an input tensor X and applies {op} pooling across
+ the values in the same channel. This is equivalent to {op_type} with kernel size
+ equal to the spatial dimension of input tensor.)DOC";
+        ReplaceAll(doc, "{op_type}", op_type);
+        ReplaceAll(doc, "{op}", op););
+    schema.SetDoc(doc);
+    schema.Attr(
+        "p", "p value of the Lp norm used to pool over the input data.", AttributeProto::INT, static_cast<int64_t>(2));
+    schema.Input(
+        0,
+        "X",
+        "Input data tensor from the previous operator; "
+        "dimensions for image case are (N x C x H x W), "
+        "where N is the batch size, C is the number of "
+        "channels, and H and W are the height and the width "
+        "of the data. For non image case, the dimensions are "
+        "in the form of (N x C x D1 x D2 ... Dn), "
+        "where N is the batch size.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.Output(
+        0,
+        "Y",
+        "Output data tensor from pooling across the input "
+        "tensor. The output tensor has the same rank as the input. "
+        "The first two dimensions of output shape are the same as "
+        "the input (N x C), while the other dimensions are all 1.",
+        "T",
+        OpSchema::Single,
+        true,
+        1,
+        OpSchema::Differentiable);
+    schema.TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.");
+    schema.TypeAndShapeInferenceFunction([](InferenceContext& ctx) { globalPoolTypeShapeInference(ctx); });
+  };
+}
+
+ONNX_OPERATOR_SET_SCHEMA(GlobalLpPool, 22, OpSchema().FillUsing(GlobalLpPoolingOpSchemaGenerator("LpPool", "lp pool")));
+
+static constexpr const char* BatchNormalization_ver15_doc = R"DOC(
+Carries out batch normalization as described in the paper
+https://arxiv.org/abs/1502.03167. Depending on the mode it is being run,
+There are five required inputs 'X', 'scale', 'B', 'input_mean' and
+'input_var'.
+Note that 'input_mean' and 'input_var' are expected to be the estimated
+statistics in inference mode (training_mode=False, default),
+and the running statistics in training mode (training_mode=True).
+There are multiple cases for the number of outputs, which we list below:
+
+* Output case #1: Y, running_mean, running_var (training_mode=True)
+* Output case #2: Y (training_mode=False)
+
+When training_mode=False, extra outputs are invalid.
+The outputs are updated as follows when training_mode=True:
+```
+running_mean = input_mean * momentum + current_mean * (1 - momentum)
+running_var = input_var * momentum + current_var * (1 - momentum)
+
+Y = (X - current_mean) / sqrt(current_var + epsilon) * scale + B
+```
+where:
+```
+current_mean = ReduceMean(X, axis=all_except_channel_index)
+current_var =  ReduceVar(X, axis=all_except_channel_index)
+```
+Notice that `ReduceVar` refers to the population variance, and it equals to
+`sum(sqrd(x_i - x_avg)) / N`
+where `N` is the population size (this formula does not use sample size `N - 1`).
+
+The computation of ReduceMean and ReduceVar uses float to avoid overflow for float16 inputs.
+
+When training_mode=False:
+```
+Y = (X - input_mean) / sqrt(input_var + epsilon) * scale + B
+```
+
+For previous (depreciated) non-spatial cases, implementors are suggested
+to flatten the input shape to (N x C * D1 * D2 * ... * Dn) before a BatchNormalization Op.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    BatchNormalization,
+    15,
+    OpSchema()
+        .NumOutputs({1, 3})
+        .SetDoc(BatchNormalization_ver15_doc + GenerateOptionalArgumentsDoc())
+        .Attr("epsilon", "The epsilon value to use to avoid division by zero.", AttributeProto::FLOAT, 1e-5f)
+        .Attr(
+            "momentum",
+            "Factor used in computing the running mean and variance."
+            "e.g., running_mean = running_mean * momentum + mean * (1 - momentum).",
+            AttributeProto::FLOAT,
+            0.9f)
+        .Attr(
+            "training_mode",
+            "If set to true, it indicates BatchNormalization is being used for training, and outputs 1 "
+            "and 2 are to be computed.",
+            AttributeProto::INT,
+            static_cast<int64_t>(0))
+        .Input(
+            0,
+            "X",
+            "Input data tensor from the previous operator; "
+            "dimensions are in the form of (N x C x D1 x D2 ... Dn), "
+            "where N is the batch size, C is the number of channels. "
+            "Statistics are computed for every channel of C over N and D1 to Dn dimensions. "
+            "For image data, input dimensions become (N x C x H x W). "
+            "The op also accepts single dimension input of size N in which case C is assumed to be 1",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(1, "scale", "Scale tensor of shape (C).", "T1", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Input(2, "B", "Bias tensor of shape (C).", "T1", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Input(
+            3,
+            "input_mean",
+            "running (training) or estimated (testing) mean tensor of shape (C).",
+            "T2",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(
+            4,
+            "input_var",
+            "running (training) or estimated (testing) variance tensor of shape (C).",
+            "T2",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Output(
+            0,
+            "Y",
+            "The output tensor of the same shape as X",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Output(
+            1,
+            "running_mean",
+            "The running mean after the BatchNormalization operator.",
+            "T2",
+            OpSchema::Optional,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Output(
+            2,
+            "running_var",
+            "The running variance after the BatchNormalization operator. This op uses the population size (N) for "
+            "calculating variance, and not the sample size N-1.",
+            "T2",
+            OpSchema::Optional,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .TypeConstraint(
+            "T",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain input and output types to float tensors.")
+        .TypeConstraint(
+            "T1",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain scale and bias types to float tensors.")
+        .TypeConstraint(
+            "T2",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain mean and variance types to float tensors.")
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          propagateShapeAndTypeFromFirstInput(ctx);
+          propagateShapeFromInputToOutput(ctx, 0, 0);
+
+          // Inputs 1 to 4 must be of rank 1.
+          checkInputRank(ctx, 1, 1);
+          checkInputRank(ctx, 2, 1);
+          checkInputRank(ctx, 3, 1);
+          checkInputRank(ctx, 4, 1);
+
+          Dim num_channels;
+
+          if (hasInputShape(ctx, 0)) {
+            if (getInputShape(ctx, 0).dim_size() > 1)
+              unifyInputDim(ctx, 0, 1, num_channels);
+            else
+              unifyDim(num_channels, 1);
+          }
+
+          unifyInputDim(ctx, 1, 0, num_channels);
+          unifyInputDim(ctx, 2, 0, num_channels);
+          unifyInputDim(ctx, 3, 0, num_channels);
+          unifyInputDim(ctx, 4, 0, num_channels);
+
+          if (ctx.getAttribute("training_mode") && static_cast<int>(ctx.getAttribute("training_mode")->i()) != 0) {
+            if (ctx.getNumOutputs() != 3)
+              fail_shape_inference("This number of op outputs should be 3 when Training_mode = True, but it is not.");
+          } else {
+            if (ctx.getNumOutputs() != 1)
+              fail_shape_inference("This number of op outputs should be 1 when Training_mode = False, but it is not.");
+          }
+
+          if (ctx.getNumOutputs() > 1) {
+            TensorShapeProto outputs_shape;
+            *outputs_shape.add_dim() = num_channels; // channel
+
+            propagateElemTypeFromInputToOutput(ctx, 3, 1);
+            updateOutputShape(ctx, 1, outputs_shape);
+
+            if (ctx.getNumOutputs() > 2) {
+              propagateElemTypeFromInputToOutput(ctx, 4, 2);
+              updateOutputShape(ctx, 2, outputs_shape);
+            }
+          }
+        }));
+
+static constexpr const char* InstanceNormalization_ver22_doc = R"DOC(
+Carries out instance normalization as described in the paper
+https://arxiv.org/abs/1607.08022.
+
+y = scale * (x - mean) / sqrt(variance + epsilon) + B,
+where mean and variance are computed per instance per channel.
+
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    InstanceNormalization,
+    22,
+    OpSchema()
+        .SetDoc(InstanceNormalization_ver22_doc)
+        .Attr("epsilon", "The epsilon value to use to avoid division by zero.", AttributeProto::FLOAT, 1e-5f)
+        .Input(
+            0,
+            "input",
+            "Input data tensor from the previous operator; "
+            "dimensions for image case are (N x C x H x W), "
+            "where N is the batch size, C is the number of "
+            "channels, and H and W are the height and the "
+            "width of the data. For non image case, the "
+            "dimensions are in the form of "
+            "(N x C x D1 x D2 ... Dn), where N is the batch "
+            "size.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(
+            1,
+            "scale",
+            "The input 1-dimensional scale tensor of size C.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(
+            2,
+            "B",
+            "The input 1-dimensional bias tensor of size C.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Output(
+            0,
+            "output",
+            "The output tensor of the same shape as input.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.")
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) { propagateShapeAndTypeFromFirstInput(ctx); }));
+
+static constexpr const char* LpNormalization_ver22_doc = R"DOC(
+Given a matrix, apply Lp-normalization along the provided axis.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    LpNormalization,
+    22,
+    OpSchema()
+        .Input(0, "input", "Input matrix", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Output(0, "output", "Matrix after normalization", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.")
+        .SetDoc(LpNormalization_ver22_doc)
+        .Attr(
+            "axis",
+            "The axis on which to apply normalization, -1 mean last axis.",
+            AttributeProto::INT,
+            static_cast<int64_t>(-1))
+        .Attr(
+            "p",
+            "The order of the normalization, only 1 or 2 are supported.",
+            AttributeProto::INT,
+            static_cast<int64_t>(2))
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) { propagateShapeAndTypeFromFirstInput(ctx); }));
+
+static constexpr const char* Dropout_ver22_doc = R"DOC(
+Dropout takes an input floating-point tensor, an optional input ratio (floating-point scalar) and an optional input training_mode (boolean scalar). It produces two tensor outputs,
+output (floating-point tensor) and mask (optional `Tensor<bool>`). If `training_mode` is true then the output Y will be a random dropout;
+Note that this Dropout scales the masked input data by the following equation, so to convert the trained model into inference mode,
+the user can simply not pass `training_mode` input or set it to false.
+```
+output = scale * data * mask,
+```
+where
+```
+scale = 1. / (1. - ratio).
+```
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    Dropout,
+    22,
+    OpSchema()
+        .SetDoc(GET_OP_DOC_STR(std::string(Dropout_ver22_doc) + GenerateOptionalArgumentsDoc()))
+        .Attr(
+            "seed",
+            "(Optional) Seed to the random generator, if not specified we will auto generate one.",
+            AttributeProto::INT,
+            OPTIONAL_VALUE)
+        .Input(0, "data", "The input data as Tensor.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Input(
+            1,
+            "ratio",
+            "The ratio of random dropout, with value in [0, 1). If set to 0, "
+            "the output would be a simple copy of the input. "
+            "If it's non-zero, output will be a random dropout of the scaled input, which is typically "
+            "the case during training. It is an optional value, if not specified it will default to 0.5.",
+            "T1",
+            OpSchema::Optional,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Input(
+            2,
+            "training_mode",
+            "If set to true then it indicates dropout is being used for training. It is an optional value hence unless "
+            "specified explicitly, it is false. If it is false, ratio is ignored and the operation mimics inference mode where "
+            "nothing will be dropped from the input data and if mask is requested as output it will contain all ones.",
+            "T2",
+            OpSchema::Optional,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Output(0, "output", "The output.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Output(1, "mask", "The output mask.", "T2", OpSchema::Optional, true, 1, OpSchema::NonDifferentiable)
+        .TypeConstraint("T", OpSchema::all_float_types_ir10(), "Constrain input and output types to float tensors.")
+        .TypeConstraint("T1", OpSchema::all_float_types_ir10(), "Constrain input 'ratio' types to float tensors.")
+        .TypeConstraint("T2", {"tensor(bool)"}, "Constrain output 'mask' types to boolean tensors.")
+        .SetNodeDeterminism(OpSchema::NodeDeterminism::NonDeterministic)
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          propagateElemTypeFromInputToOutput(ctx, 0, 0);
+          if (hasInputShape(ctx, 0)) {
+            propagateShapeFromInputToOutput(ctx, 0, 0);
+          }
+
+          if (ctx.getNumInputs() > 1 && hasInputShape(ctx, 1)) {
+            auto& ratio_input_shape = getInputShape(ctx, 1);
+            if (static_cast<int>(ratio_input_shape.dim_size()) != 0) {
+              fail_shape_inference("Ratio of Dropout must be a scalar.");
+            }
+          }
+
+          if (ctx.getNumInputs() > 2 && hasInputShape(ctx, 2)) {
+            auto& training_mode_input_shape = getInputShape(ctx, 2);
+            if (static_cast<int>(training_mode_input_shape.dim_size()) != 0) {
+              fail_shape_inference("training_mode of Dropout must be a scalar.");
+            }
+          }
+
+          if (ctx.getNumOutputs() == 2) {
+            updateOutputElemType(ctx, 1, TensorProto::BOOL);
+            if (hasNInputShapes(ctx, 1)) {
+              propagateShapeFromInputToOutput(ctx, 0, 1);
+            }
+          }
+        }));
+
+static constexpr const char* Shrink_ver9_doc = R"DOC(
+Shrink takes one input data (Tensor<numeric>) and produces one Tensor output,
+having same datatype and shape with input. It has two attributes, lambd and
+bias. The formula of this operator is: If x < -lambd, y = x + bias;
+If x > lambd, y = x - bias; Otherwise, y = 0.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    Shrink,
+    9,
+    OpSchema()
+        .SetDoc(Shrink_ver9_doc)
+        .Attr("lambd", "The lambd value for the Shrink formulation. Default is 0.5.", AttributeProto::FLOAT, 0.5f)
+        .Attr("bias", "The bias value added to output. Default is 0.", AttributeProto::FLOAT, 0.0f)
+        .Input(0, "input", "The input data as Tensor.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Output(0, "output", "The output.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .TypeConstraint("T", OpSchema::all_numeric_types(), "Constrain input to only numeric types.")
+        .TypeAndShapeInferenceFunction(propagateShapeAndTypeFromFirstInput)
+        .FunctionBody(
+            R"ONNX(
+          {
+            Lambd = Constant <value_float: float = @lambd>()
+            LambdCast = CastLike (Lambd, input)
+            Bias = Constant <value_float: float = @bias>()
+            BiasCast = CastLike (Bias, input)
+            Zero = Constant <value = float {0.0}>()
+            ZeroCast = CastLike (Zero, input)
+            NegLmbda = Neg (LambdCast)
+            InputLessThanNegLambda = Less (input, NegLmbda)
+            InputAddBias = Add (input, BiasCast)
+            InputSubBias = Sub (input, BiasCast)
+            LambdaLessThanInput = Less (LambdCast, input)
+            InputSubBiasOrZero = Where (LambdaLessThanInput, InputSubBias, ZeroCast)
+            output = Where(InputLessThanNegLambda, InputAddBias, InputSubBiasOrZero)
+          }
+        )ONNX",
+            18));
+
+static constexpr const char* Flatten_ver25_doc = R"DOC(
+Flattens the input tensor into a 2D matrix. If input tensor has shape
+(d_0, d_1, ... d_n) then the output will have shape
+(d_0 X d_1 ... d_(axis-1), d_axis X d_(axis+1) ... X dn).
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    Flatten,
+    25,
+    OpSchema()
+        .SetDoc(Flatten_ver25_doc)
+        .Input(0, "input", "A tensor of rank >= axis.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Output(
+            0,
+            "output",
+            "A 2D tensor with the contents of the input tensor, "
+            "with input dimensions up to axis flattened to the outer dimension "
+            "of the output and remaining input dimensions flattened into the inner "
+            "dimension of the output.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .TypeConstraint(
+            "T",
+            OpSchema::all_tensor_types_ir13(),
+            "Constrain input and output to all tensor types up to IRv13.")
+        .Attr(
+            "axis",
+            "Indicate up to which input dimensions "
+            "(exclusive) should be flattened to the outer dimension of the output. "
+            "The value for axis must be in the range [-r, r], where r is the rank of the input tensor. "
+            "Negative value means counting dimensions from the back. "
+            "When axis = 0, the shape of the output tensor is (1, (d_0 X d_1 ... d_n), "
+            "where the shape of the input tensor is (d_0, d_1, ... d_n). ",
+            AttributeProto::INT,
+            static_cast<int64_t>(1))
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          propagateElemTypeFromInputToOutput(ctx, 0, 0);
+          if (!hasInputShape(ctx, 0))
+            return;
+          auto& input_shape = getInputShape(ctx, 0);
+          int rank = static_cast<int>(input_shape.dim_size());
+          int axis = static_cast<int>(getAttribute(ctx, "axis", 1));
+          if (axis < 0) {
+            axis += rank;
+          }
+          if (axis > rank || axis < 0) {
+            fail_shape_inference("Invalid value(", axis, ") for attribute 'axis'");
+          }
+          // TODO: is the operation defined for input-rank < 2?
+          updateOutputShape(ctx, 0, {multiplyDims(input_shape, 0, axis), multiplyDims(input_shape, axis, rank)});
+        }));
+
+static constexpr const char* LRN_ver13_doc = R"DOC(
+Local Response Normalization proposed in the [AlexNet paper](https://papers.nips.cc/paper/4824-imagenet-classification-with-deep-convolutional-neural-networks.pdf).
+It normalizes over local input regions.
+The local region is defined across the channels. For an element `X[n, c, d1, ..., dk]` in a tensor
+of shape `(N x C x D1 x D2, ..., Dk)`, its region is
+`{X[n, i, d1, ..., dk] | max(0, c - floor((size - 1) / 2)) <= i <= min(C - 1, c + ceil((size - 1) / 2))}`.
+
+`square_sum[n, c, d1, ..., dk] = sum(X[n, i, d1, ..., dk] ^ 2)`,
+where `max(0, c - floor((size - 1) / 2)) <= i <= min(C - 1, c + ceil((size - 1) / 2))`.
+
+`Y[n, c, d1, ..., dk] = X[n, c, d1, ..., dk] / (bias + alpha / size * square_sum[n, c, d1, ..., dk] ) ^ beta`
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    LRN,
+    13,
+    OpSchema()
+        .Attr("size", "The number of channels to sum over", AttributeProto::INT)
+        .Attr("alpha", "Scaling parameter.", AttributeProto::FLOAT, 0.0001f)
+        .Attr("beta", "The exponent.", AttributeProto::FLOAT, 0.75f)
+        .Attr("bias", "", AttributeProto::FLOAT, 1.0f)
+        .Input(
+            0,
+            "X",
+            "Input data tensor from the previous operator; "
+            "dimensions for image case are (N x C x H x W), "
+            "where N is the batch size, C is the number of "
+            "channels, and H and W are the height and the "
+            "width of the data. For non image case, the "
+            "dimensions are in the form of "
+            "(N x C x D1 x D2 ... Dn), where N is the batch "
+            "size. Optionally, if dimension denotation is "
+            "in effect, the operation expects the input "
+            "data tensor to arrive with the dimension denotation "
+            "of [DATA_BATCH, DATA_CHANNEL, DATA_FEATURE, DATA_FEATURE ...].",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Output(
+            0,
+            "Y",
+            "Output tensor, which has the shape and type as input tensor",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .TypeConstraint(
+            "T",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain input and output "
+            " types to float tensors.")
+        .SetDoc(LRN_ver13_doc)
+        .TypeAndShapeInferenceFunction(propagateShapeAndTypeFromFirstInput));
+
+static constexpr const char* TfIdfVectorizer_ver9_doc = R"DOC(
+This transform extracts n-grams from the input sequence and save them as a vector. Input can
+be either a 1-D or 2-D tensor. For 1-D input, output is the n-gram representation of that input.
+For 2-D input, the output is also a  2-D tensor whose i-th row is the n-gram representation of the i-th input row.
+More specifically, if input shape is [C], the corresponding output shape would be [max(ngram_indexes) + 1].
+If input shape is [N, C], this operator produces a [N, max(ngram_indexes) + 1]-tensor.
+
+In contrast to standard n-gram extraction, here, the indexes of extracting an n-gram from the original
+sequence are not necessarily consecutive numbers. The discontinuity between indexes are controlled by the number of skips.
+If the number of skips is 2, we should skip two tokens when scanning through the original sequence.
+Let's consider an example. Assume that input sequence is [94, 17, 36, 12, 28] and the number of skips is 2.
+The associated 2-grams are [94, 12] and [17, 28] respectively indexed by [0, 3] and [1, 4].
+If the number of skips becomes 0, the 2-grams generated are [94, 17], [17, 36], [36, 12], [12, 28]
+indexed by [0, 1], [1, 2], [2, 3], [3, 4], respectively.
+
+The output vector (denoted by Y) stores the count of each n-gram;
+Y[ngram_indexes[i]] indicates the times that the i-th n-gram is found. The attribute ngram_indexes is used to determine the mapping
+between index i and the corresponding n-gram's output coordinate. If pool_int64s is [94, 17, 17, 36], ngram_indexes is [1, 0],
+ngram_counts=[0, 0], then the Y[0] (first element in Y) and Y[1] (second element in Y) are the counts of [17, 36] and [94, 17],
+respectively. An n-gram which cannot be found in pool_strings/pool_int64s should be ignored and has no effect on the output.
+Note that we may consider all skips up to S when generating the n-grams.
+
+The examples used above are true if mode is "TF". If mode is "IDF", all the counts larger than 1 would be truncated to 1 and
+the i-th element in weights would be used to scale (by multiplication) the count of the i-th n-gram in pool. If mode is "TFIDF",
+this operator first computes the counts of all n-grams and then scale them by the associated values in the weights attribute.
+
+Only one of pool_strings and pool_int64s can be set. If pool_int64s is set, the input should be an integer tensor.
+If pool_strings is set, the input must be a string tensor.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    TfIdfVectorizer,
+    9,
+    OpSchema()
+        .Input(0, "X", "Input for n-gram extraction", "T", OpSchema::Single, true, 1, OpSchema::NonDifferentiable)
+        .Output(0, "Y", "Ngram results", "T1", OpSchema::Single, true, 1, OpSchema::NonDifferentiable)
+        .TypeConstraint(
+            "T",
+            {"tensor(string)", "tensor(int32)", "tensor(int64)"},
+            "Input is ether string UTF-8 or int32/int64")
+        .TypeConstraint("T1", {"tensor(float)"}, "1-D tensor of floats")
+        .Attr(
+            "max_gram_length",
+            "Maximum n-gram length. If this value is 3, 3-grams will be used to generate the output.",
+            AttributeProto::INT)
+        .Attr(
+            "min_gram_length",
+            "Minimum n-gram length. If this value is 2 and max_gram_length is 3, output may contain counts of 2-grams and 3-grams.",
+            AttributeProto::INT)
+        .Attr(
+            "max_skip_count",
+            "Maximum number of items (integers/strings) to be skipped when constructing an n-gram from X. "
+            "If max_skip_count=1, min_gram_length=2, max_gram_length=3, this operator may generate 2-grams "
+            "with skip_count=0 and skip_count=1, and 3-grams with skip_count=0 and skip_count=1",
+            AttributeProto::INT)
+        .Attr(
+            "pool_strings",
+            "List of strings n-grams learned from the training set. Either this or pool_int64s attributes must be present but not both. "
+            "It's an 1-D tensor starting with the collections of all 1-grams and ending with the collections of n-grams. "
+            "The i-th element in pool stores the n-gram that should be mapped to coordinate ngram_indexes[i] in the output vector.",
+            AttributeProto::STRINGS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "pool_int64s",
+            "List of int64 n-grams learned from the training set. Either this or pool_strings attributes must be present but not both. "
+            "It's an 1-D tensor starting with the collections of all 1-grams and ending with the collections of n-grams. "
+            "The i-th element in pool stores the n-gram that should be mapped to coordinate ngram_indexes[i] in the output vector.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "ngram_counts",
+            "The starting indexes of 1-grams, 2-grams, and so on in pool. "
+            "It is useful when determining the boundary between two consecutive collections of n-grams. "
+            "For example, if ngram_counts is [0, 17, 36], the first index (zero-based) of 1-gram/2-gram/3-gram "
+            "in pool are 0/17/36. This format is essentially identical to CSR (or CSC) sparse matrix format, "
+            "and we choose to use this due to its popularity.",
+            AttributeProto::INTS)
+        .Attr(
+            "ngram_indexes",
+            "list of int64s (type: AttributeProto::INTS). This list is parallel to the specified 'pool_*' attribute. "
+            "The i-th element in ngram_indexes indicate the coordinate of the i-th n-gram in the output tensor.",
+            AttributeProto::INTS)
+        .Attr(
+            "weights",
+            "list of floats. This attribute stores the weight of each n-gram in pool. The i-th element in weights "
+            "is the weight of the i-th n-gram in pool. Its length equals to the size of ngram_indexes. "
+            "By default, weights is an all-one tensor.This attribute is used when mode is \"IDF\" or \"TFIDF\" "
+            "to scale the associated word counts.",
+            AttributeProto::FLOATS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "mode",
+            "The weighting criteria. It can be one of \"TF\" (term frequency), "
+            "\"IDF\" (inverse document frequency), and \"TFIDF\" (the combination of TF and IDF)",
+            AttributeProto::STRING)
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          auto output_elem_type = ctx.getOutputType(0)->mutable_tensor_type();
+          output_elem_type->set_elem_type(TensorProto::FLOAT);
+
+          if (hasInputShape(ctx, 0)) {
+            std::vector<int64_t> ngram_indexes;
+            getRepeatedAttribute(ctx, "ngram_indexes", ngram_indexes);
+            if (ngram_indexes.empty() ||
+                !std::all_of(ngram_indexes.cbegin(), ngram_indexes.cend(), [](int64_t i) { return i >= 0; })) {
+              fail_shape_inference("ngram_indexes must be non-empty with no negative values");
+            }
+
+            auto greatest_hit = std::max_element(ngram_indexes.cbegin(), ngram_indexes.cend());
+            auto max_last_axis = *greatest_hit + 1;
+
+            TensorShapeProto output_shape;
+            auto& input_shape = ctx.getInputType(0)->tensor_type().shape();
+            auto dim_size = input_shape.dim_size();
+            if (dim_size == 1) {
+              output_shape.add_dim()->set_dim_value(max_last_axis);
+            } else if (dim_size == 2) {
+              *output_shape.add_dim() = input_shape.dim(0);
+              output_shape.add_dim()->set_dim_value(max_last_axis);
+            } else {
+              fail_shape_inference("Input tensor must have rank 1 or 2");
+            }
+            updateOutputShape(ctx, 0, output_shape);
+          }
+        })
+        .SetDoc(TfIdfVectorizer_ver9_doc));
+
+static constexpr const char* mvn_ver13_doc = R"DOC(
+      A MeanVarianceNormalization Function: Perform mean variance normalization
+      on the input tensor X using formula: `(X-EX)/sqrt(E(X-EX)^2)`
+)DOC";
+
+static const std::vector<int64_t> mvn_default_axes = {0, 2, 3};
+
+ONNX_OPERATOR_SET_SCHEMA(
+    MeanVarianceNormalization,
+    13,
+    OpSchema()
+        .SetDoc(mvn_ver13_doc)
+        .Input(0, "X", "Input tensor", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Output(0, "Y", "Output tensor", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Attr(
+            "axes",
+            "A list of integers, along which to reduce. The default is to "
+            "calculate along axes [0,2,3] for calculating mean and variance "
+            "along each channel. Two variables with the same C-coordinate "
+            "are associated with the same mean and variance.",
+            AttributeProto::INTS,
+            mvn_default_axes)
+        .TypeConstraint(
+            "T",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain input and output types to all numeric tensors.")
+        .FunctionBody(R"ONNX(
+        {
+          Exponent = Constant <value = float {2.0}>()
+          Epsilon = Constant <value = float {1e-9}>()
+          X_RM = ReduceMean <axes : ints = @axes> (X)
+          EX_squared = Pow (X_RM, Exponent)
+          X_squared = Pow (X, Exponent)
+          E_Xsquared = ReduceMean <axes : ints = @axes> (X_squared)
+          Variance = Sub (E_Xsquared, EX_squared)
+          STD = Sqrt (Variance)
+          X_variance = Sub (X, X_RM)
+          Processed_STD = Add (STD, Epsilon)
+          Y = Div (X_variance, Processed_STD)
+        }
+        )ONNX")
+        .FunctionBody(
+            R"ONNX(
+        {
+          Exponent = Constant <value = float {2.0}>()
+          Epsilon = Constant <value = float {1e-9}>()
+          axes = Constant <value_ints: ints = @axes>()
+          X_RM = ReduceMean (X, axes)
+          EX_squared = Pow (X_RM, Exponent)
+          X_squared = Pow (X, Exponent)
+          E_Xsquared = ReduceMean (X_squared, axes)
+          Variance = Sub (E_Xsquared, EX_squared)
+          STD = Sqrt (Variance)
+          X_variance = Sub (X, X_RM)
+          Processed_STD = Add (STD, Epsilon)
+          Y = Div (X_variance, Processed_STD)
+        }
+        )ONNX",
+            18));
+
+static void col2imShapeInference(InferenceContext& ctx) {
+  propagateElemTypeFromInputToOutput(ctx, 0, 0);
+
+  // All inputs shapes are required
+  if (!hasNInputShapes(ctx, 3)) {
+    return;
+  }
+
+  // We assume image_shape has correct spatial dimensions for next validations
+  // An alternative is get the the number of spatial dimensions as an input argument
+  Dim n_input_dims;
+  unifyInputDim(ctx, 1, 0, n_input_dims);
+
+  unifyInputDim(ctx, 2, 0, n_input_dims);
+  checkInputRank(ctx, 1, 1);
+  checkInputRank(ctx, 2, 1);
+  std::vector<int64_t> image_shape = {};
+  const TensorProto* image_shape_data = ctx.getInputData(1);
+  if (image_shape_data) {
+    image_shape = ParseData<int64_t>(image_shape_data);
+    unifyDim(n_input_dims, image_shape.size());
+  }
+
+  std::vector<int64_t> pads = {};
+  if (getRepeatedAttribute(ctx, "pads", pads)) {
+    if (pads.size() % 2) {
+      fail_shape_inference("Attribute pads must have an even size");
+    }
+    unifyDim(n_input_dims, pads.size() / 2);
+  }
+
+  std::vector<int64_t> dilations = {};
+  if (getRepeatedAttribute(ctx, "dilations", dilations)) {
+    unifyDim(n_input_dims, dilations.size());
+  }
+
+  std::vector<int64_t> strides = {};
+  if (getRepeatedAttribute(ctx, "strides", strides)) {
+    unifyDim(n_input_dims, strides.size());
+  }
+
+  auto input_shape = ctx.getInputType(0)->tensor_type().shape();
+  if (input_shape.dim_size() != 3) {
+    fail_shape_inference("input must have rank 3.");
+  }
+
+  std::vector<int64_t> block_shape = {};
+  const TensorProto* block_shape_data = ctx.getInputData(2);
+  if (block_shape_data) {
+    block_shape = ParseData<int64_t>(block_shape_data);
+    unifyDim(n_input_dims, block_shape.size());
+  }
+  unifyInputDim(ctx, 2, 0, n_input_dims);
+
+  int block_shape_size = 0;
+  if (static_cast<int>(block_shape.size()) > 0) {
+    block_shape_size = 1;
+    for (const auto& dim : block_shape) {
+      block_shape_size *= dim;
+    }
+  }
+  // If we haven't inferred the number of image dimensions, we can't set inferred shape.
+  if (!n_input_dims.has_dim_value()) {
+    return;
+  }
+
+  // Final shape will be (N, C, dim_1, ..., dim_N)
+  auto final_image_shape = ctx.getOutputType(0)->mutable_tensor_type()->mutable_shape();
+
+  // Dimensions N and C are always present
+  Dim N, C;
+  if (ctx.getInputType(0)->tensor_type().shape().dim(0).has_dim_value()) {
+    N = input_shape.dim(0); // Otherwise, N is unknown.
+  }
+  *final_image_shape->add_dim() = N;
+
+  if (block_shape_size > 0) {
+    C = input_shape.dim(1) / block_shape_size; // Otherwise, C is unknown.
+  }
+  *final_image_shape->add_dim() = C;
+
+  // Image dimensions are dynamic
+  for (auto i = 0; i < n_input_dims.dim_value(); ++i) {
+    Dim image_dim_i;
+    if (!image_shape.empty()) {
+      image_dim_i.set_dim_value(image_shape[i]); // Otherwise, spatial dimensions are unknown
+    }
+    *final_image_shape->add_dim() = image_dim_i;
+  }
+}
+
+static constexpr const char* Col2Im_ver18_doc = R"DOC(
+The operator rearranges column blocks back into a multidimensional image
+
+Col2Im behaves similarly to PyTorch's fold https://pytorch.org/docs/stable/generated/torch.nn.Fold.html,
+but it only supports *batched* multi-dimensional image tensors.
+Another implementation in Python with N-dimension support can be found at https://github.com/f-dangel/unfoldNd/.
+
+NOTE:
+  Although specifying image_shape looks redundant because it could be calculated from
+  convolution formulas, it is required as input for more advanced scenarios as explained
+  at PyTorch's implementation (https://github.com/pytorch/pytorch/blob/master/aten/src/ATen/native/Col2Im.cpp#L10)
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    Col2Im,
+    18,
+    OpSchema()
+        .Attr(
+            "dilations",
+            "1-dimensional tensor with dilation value along each spatial axis of the image. "
+            "If not present, the dilation defaults to 1 along each spatial axis of the image.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "pads",
+            "1-dimensional tensor with padding value for the beginning and ending along each spatial axis, "
+            "it can take any value greater than or equal to 0. "
+            "The value represent the number of pixels added to the beginning "
+            "and end part of the corresponding axis. `pads` format should be as follow "
+            "[x1_begin, x2_begin...x1_end, x2_end,...], where xi_begin is the number of pixels "
+            "added at the beginning of axis `i` and xi_end is the number of pixels added at the end of axis `i`. "
+            "If not present, the padding defaults to 0 along start and end of each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .Attr(
+            "strides",
+            "1-dimensional tensor with stride value along each spatial axis. "
+            "If not present, the stride defaults to 1 along each spatial axis.",
+            AttributeProto::INTS,
+            OPTIONAL_VALUE)
+        .SetDoc(Col2Im_ver18_doc)
+        .Input(
+            0,
+            "input",
+            "Input data tensor to be rearranged from column blocks back into an image."
+            " This is a 3-dimensional tensor containing [N, C * n-ary-product(block_shape), L],"
+            " where N is batch dimension, C is image channel dimension and L is number of blocks."
+            "The blocks are enumerated in increasing lexicographic-order of their indices."
+            "For example, with an image-size 10*20 and block-size 9*18, there would be 2*3 blocks,"
+            " enumerated in the order block(0, 0), block(0, 1), block(0, 2), block(1, 0), block(1, 1), block(1, 2).",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(
+            1,
+            "image_shape",
+            "The shape of the spatial dimensions of the image after rearranging the column blocks."
+            "This is a 1-dimensional tensor with size of at least 2, containing the value [H_img, W_img] "
+            " for a 2-D image or [dim_i1, dim_i2, ..., dim_iN] for a N-D image.",
+            "tensor(int64)",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Input(
+            2,
+            "block_shape",
+            "The shape of the block to apply on the input."
+            "This is a 1-dimensional tensor of size of at least 2, containing the value [H_block, W_block] "
+            " for a 2-D image or [dim_b1, dim_b2, ..., dim_bN] for a N-D block."
+            "This is the block-shape before dilation is applied to it.",
+            "tensor(int64)",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::NonDifferentiable)
+        .Output(
+            0,
+            "output",
+            "Output tensor produced by rearranging blocks into an image.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .TypeConstraint(
+            "T",
+            OpSchema::all_tensor_types_ir4(),
+            "Constrain input and output types to all numeric tensor types.")
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) { col2imShapeInference(ctx); }));
+
+static constexpr const char* LayerNormalization_ver17_doc = R"DOC(
+      This is layer normalization defined in ONNX as function.
+      The overall computation can be split into two stages.
+      The first stage is standardization, which makes the
+      normalized elements have zero mean and unit variances.
+      The computation required by standardization can be
+      described by the following equations.
+      ```
+      Mean = ReduceMean<axes=normalized_axes>(X)
+      D = Sub(X, Mean)
+      DD = Mul(D, D)
+      Var = ReduceMean<axes=normalized_axes>(DD)
+      VarEps = Add(Var, epsilon)
+      StdDev = Sqrt(VarEps)
+      InvStdDev = Reciprocal(StdDev)
+      Normalized = Mul(D, InvStdDev)
+      ```
+      where `normalized_axes` is `[axis, ..., rank of X - 1]`.
+      The variables `Var` and `StdDev` stand for variance and
+      standard deviation, respectively. The second output is
+      `Mean` and the last one is `InvStdDev`.
+      Depending on `stash_type` attribute, the actual computation
+      must happen in different floating-point precision.
+      For example, if `stash_type` is 1, this operator casts
+      all input variables to 32-bit float, perform the computation, and
+      finally cast `Normalized` back to the original type of `X`.
+      The second stage then scales and shifts the outcome of the
+      first stage using
+      ```
+      NormalizedScaled = Mul(Normalized, Scale)
+      Y = Add(NormalizedScaled, B)
+      ```
+      The second stage doesn't depends on `stash_type`.
+      All equations are in [this syntax](https://github.com/onnx/onnx/blob/main/docs/Syntax.md).
+      The same variable (i.e., input, output, and attribute) uses
+      the same name in the equations above and this operator's definition.
+      Let `d[i]` indicate the i-th dimension of `X`.
+      If `X`'s shape is `[d[0], ..., d[axis-1], d[axis], ..., d[rank-1]]`,
+      the shape of `Mean` and `InvStdDev` is `[d[0], ..., d[axis-1], 1, ..., 1]`.
+      `Y` and `X` have the same shape. This operator supports unidirectional broadcasting
+      (tensors `Scale` and `B` should be unidirectional broadcastable to tensor `X`);
+      for more details please check [the doc](Broadcasting.md).
+)DOC";
+
+static bool BuildContextDependentFunctionBodyLayerNormalization(
+    const FunctionBodyBuildContext& ctx,
+    const OpSchema& schema,
+    FunctionProto& functionProto,
+    int sinceVersion) {
+  ONNX_ASSERT(sinceVersion == 17 || sinceVersion == 18)
+  // LayerNormalization <axis, epsilon, stash_type> (X, Scale, B) => (Y, Mean?, InvStdDev?)
+  auto* tp = ctx.getInputType(0);
+  if ((tp == nullptr) || (!tp->has_tensor_type()))
+    return false;
+  int64_t T = tp->tensor_type().elem_type();
+
+  auto type_attr = ctx.getAttribute("stash_type");
+  int64_t U =
+      (type_attr != nullptr) ? type_attr->i() : static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT);
+  if ((U != ONNX_NAMESPACE::TensorProto_DataType_FLOAT) && (U != ONNX_NAMESPACE::TensorProto_DataType_BFLOAT16))
+    return false; // Error
+
+  auto* axis_attr = ctx.getAttribute("axis");
+  int64_t axis = (axis_attr != nullptr) ? axis_attr->i() : -1;
+  auto* epsilon_attr = ctx.getAttribute("epsilon");
+  float epsilon = (epsilon_attr != nullptr) ? epsilon_attr->f() : 1e-5f;
+
+  auto mktensor = [](int64_t val) -> ONNX_NAMESPACE::TensorProto {
+    auto tp = ONNX_NAMESPACE::ToTensor(std::vector<int64_t>{val});
+    tp.add_dims(1);
+    return tp;
+  };
+  // The treatment of "axis" is different in "LayerNormalization" and in Reduction operations.
+  // This complicates the function definition, requiring reshaping inputs/outputs.
+  // Input X shape: [d[0], ..., d[axis-1], d[axis], ..., d[rank-1]]
+  // This is treated as a 2D shape [d[0] * ... * d[axis-1], d[axis] * ... * d[rank-1]]
+  // Normalization is applied to the second dimension.
+  // Output Y has same shape as X
+  // Outputs Mean and InvStdDev have shape: [d[0], ..., d[axis-1], 1, ..., 1]
+  FunctionBuilder builder(functionProto);
+  builder.Const("FloatEpsilon", ToTensor<float>(epsilon))
+      .Add("Epsilon = Cast (FloatEpsilon)", "to", U)
+      .Add("XShape = Shape (X)") // shape of input tensor: 1D tensor
+      .Add("Rank = Size (XShape)") // rank of input tensor: scalar
+      .Add("Zero1D = Constant()", "value", mktensor(0)) // [0] : 1D tensor
+      .Add("Axis1D = Constant()", "value", mktensor(axis)) // [axis] : 1D tensor
+      .Add("PrefixShape = Slice (XShape, Zero1D, Axis1D)") // [d[0], ..., d[axis-1]]
+      .Add(
+          axis >= 0 // number of axes that are reduced =
+              ? "NumReducedAxes = Sub (Rank, Axis1D)" // [rank - axis]: 1D tensor
+              : "NumReducedAxes = Neg (Axis1D)") // [-axis] : 1D tensor
+      .Add(
+          "SuffixShape = ConstantOfShape (NumReducedAxes)",
+          "value",
+          mktensor(1)) // [1, ..., 1] for reduced axes
+      .Add("ReducedShape = Concat <axis = 0> (PrefixShape, SuffixShape)") // [d[0], ..., d[axis-1], 1, ..., 1]
+      .Add("X2D = Flatten (X)", "axis", axis)
+      .Add("XU = Cast (X2D)", "to", U);
+  if (sinceVersion == 17) {
+    builder.Add("Mean2D = ReduceMean <axes = [1]> (XU)")
+        .Add("Square = Mul (XU, XU)")
+        .Add("MeanOfSquare = ReduceMean <axes = [1]> (Square)");
+  } else if (sinceVersion == 18) {
+    builder.Add("Axes_1 = Constant()", "value", mktensor(1))
+        .Add("Mean2D = ReduceMean (XU, Axes_1)")
+        .Add("Square = Mul (XU, XU)")
+        .Add("MeanOfSquare = ReduceMean (Square, Axes_1)");
+  }
+  builder.Add("SquareOfMean = Mul (Mean2D, Mean2D)")
+      .Add("Var = Sub (MeanOfSquare, SquareOfMean)")
+      .Add("VarPlusEpsilon = Add (Var, Epsilon)")
+      .Add("StdDev = Sqrt (VarPlusEpsilon)")
+      .Add("Deviation = Sub (XU, Mean2D)")
+      .Add("Normalized = Div (Deviation, StdDev)")
+      .Add("NormalizedT = Cast (Normalized)", "to", T)
+      .Add("Scale2D = Flatten <axis = 0> (Scale)")
+      .Add("Scaled = Mul (NormalizedT, Scale2D)");
+  if (ctx.hasInput(2)) {
+    builder.Add("B2D = Flatten <axis=0> (B)");
+    builder.Add("Biased = Add (Scaled, B2D)");
+  } else {
+    builder.Add("Biased = Identity (Scaled)");
+  }
+  builder.Add("Y = Reshape (Biased, XShape)");
+  builder.Add("InvStdDev2D = Reciprocal (StdDev)");
+  if (ctx.hasOutput(1))
+    builder.Add("Mean = Reshape (Mean2D, ReducedShape)");
+  if (ctx.hasOutput(2))
+    builder.Add("InvStdDev = Reshape (InvStdDev2D, ReducedShape)");
+
+  schema.BuildFunction(functionProto);
+  return true;
+}
+
+static bool BuildContextDependentFunctionBodyLayerNormalizationVer17(
+    const FunctionBodyBuildContext& ctx,
+    const OpSchema& schema,
+    FunctionProto& functionProto) {
+  return BuildContextDependentFunctionBodyLayerNormalization(ctx, schema, functionProto, 17);
+}
+
+static bool BuildContextDependentFunctionBodyLayerNormalizationVer18(
+    const FunctionBodyBuildContext& ctx,
+    const OpSchema& schema,
+    FunctionProto& functionProto) {
+  return BuildContextDependentFunctionBodyLayerNormalization(ctx, schema, functionProto, 18);
+}
+
+ONNX_OPERATOR_SET_SCHEMA(
+    LayerNormalization,
+    17,
+    OpSchema()
+        .SetDoc(LayerNormalization_ver17_doc)
+        .Attr(
+            "axis",
+            "The first normalization dimension. If rank(X) is r, axis' allowed range is [-r, r). "
+            "Negative value means counting dimensions from the back.",
+            AttributeProto::INT,
+            static_cast<int64_t>(-1))
+        .Attr("epsilon", "The epsilon value to use to avoid division by zero.", AttributeProto::FLOAT, 1e-5f)
+        .Attr(
+            "stash_type",
+            "Type of Mean and InvStdDev. This also specifies stage one's computation precision.",
+            AttributeProto::INT,
+            static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT))
+        .AllowUncheckedAttributes()
+        .Input(0, "X", "Tensor to be normalized.", "T")
+        .Input(1, "Scale", "Scale tensor.", "T")
+        .Input(2, "B", "Bias tensor.", "T", OpSchema::Optional)
+        .Output(0, "Y", "Normalized tensor.", "T")
+        .Output(1, "Mean", "Saved mean used during training to speed up gradient computation", "U", OpSchema::Optional)
+        .Output(
+            2,
+            "InvStdDev",
+            "Saved inverse standard deviation used during training to speed up gradient computation.",
+            "U",
+            OpSchema::Optional)
+        .TypeConstraint(
+            "T",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain input types and output Y type to float tensors.")
+        .TypeConstraint("U", {"tensor(float)", "tensor(bfloat16)"}, "Type of Mean and InvStdDev tensors.")
+        .SetNodeDeterminism(OpSchema::NodeDeterminism::Deterministic)
+        .SetContextDependentFunctionBodyBuilder(BuildContextDependentFunctionBodyLayerNormalizationVer17, 17)
+        .SetContextDependentFunctionBodyBuilder(BuildContextDependentFunctionBodyLayerNormalizationVer18, 18)
+        .TypeAndShapeInferenceFunction([](InferenceContext& ctx) {
+          propagateShapeAndTypeFromFirstInput(ctx);
+          auto stash_type = static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT);
+          auto stash_type_proto = ctx.getAttribute("stash_type");
+          if (stash_type_proto) {
+            stash_type = stash_type_proto->i();
+          }
+          if (ctx.getNumOutputs() > 1) {
+            auto output_type = ctx.getOutputType(1);
+            output_type->mutable_tensor_type()->set_elem_type(static_cast<int32_t>(stash_type));
+          }
+          if (ctx.getNumOutputs() > 2) {
+            auto output_type = ctx.getOutputType(2);
+            output_type->mutable_tensor_type()->set_elem_type(static_cast<int32_t>(stash_type));
+          }
+          if (!hasNInputShapes(ctx, 1)) {
+            return;
+          }
+
+          auto& input_shape = getInputShape(ctx, 0);
+          int64_t input_ndim = input_shape.dim_size();
+          int64_t axis = -1;
+          auto axis_proto = ctx.getAttribute("axis");
+          if (axis_proto) {
+            axis = axis_proto->i();
+          }
+          if (axis < 0) {
+            // Convert negative axis value to equivalent
+            // positive value.
+            axis += input_ndim;
+          }
+          if (axis < 0) {
+            fail_shape_inference(
+                "Unexpected axis value (",
+                axis,
+                ") rank of first input is ",
+                input_ndim,
+                " in ",
+                ctx.getDisplayName(),
+                ".");
+          }
+          if (ctx.getNumOutputs() > 1) {
+            auto mean_shape = ctx.getOutputType(1)->mutable_tensor_type()->mutable_shape();
+            mean_shape->CopyFrom(input_shape);
+            for (int d = static_cast<int>(axis); d < input_ndim; ++d)
+              mean_shape->mutable_dim(d)->set_dim_value(1);
+          }
+
+          if (ctx.getNumOutputs() > 2) {
+            auto inv_std_dev_shape = ctx.getOutputType(2)->mutable_tensor_type()->mutable_shape();
+            inv_std_dev_shape->CopyFrom(input_shape);
+            for (int d = static_cast<int>(axis); d < input_ndim; ++d)
+              inv_std_dev_shape->mutable_dim(d)->set_dim_value(1);
+          }
+        }));
+
+static constexpr const char* GroupNormalization_ver21_doc = R"DOC(
+A GroupNormalization function. Carries out group normalization as described in
+the paper https://arxiv.org/abs/1803.08494
+
+This operator transforms input according to
+```
+y = scale * (x - mean) / sqrt(variance + epsilon) + bias,
+```
+where the mean and variance are computed per instance per group of channels, and
+`scale` and `bias` should be specified for each channel. The number of
+groups `num_groups` should be divisible by the number of channels so that there are
+an equal number of channels per group.
+
+The overall computation has two stages: the first stage normalizes the elements to
+have zero mean and unit variance for each instance in each group, and the second
+stage scales and shifts the results of the first stage. The floating-point precision
+used in the first stage is determined by the `stash_type` attribute. For example,
+if `stash_type` is 1, the operator casts all input variables to 32-bit float,
+performs the computation, and finally casts the normalized results back to the
+original type of `X`. The second stage does not depend on `stash_type`.
+
+When the number of groups is the same as the number of channels, this operator is
+equivalent to InstanceNormalization. When there is only one group, this operator
+is equivalent to LayerNormalization.
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    GroupNormalization,
+    21,
+    OpSchema()
+        .SetDoc(GroupNormalization_ver21_doc)
+        .Attr("epsilon", "The epsilon value to use to avoid division by zero.", AttributeProto::FLOAT, 1e-5f)
+        .Attr(
+            "num_groups",
+            "The number of groups of channels. It should be a divisor of the number of channels `C`.",
+            AttributeProto::INT,
+            true)
+        .Attr(
+            "stash_type",
+            "The floating-point precision used in stage one of the computation.",
+            AttributeProto::INT,
+            static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT))
+        .Input(
+            0,
+            "X",
+            "Input data tensor. Dimensions for image cases are `(N x C x H x W)`, where `N` is the batch size, "
+            "`C` is the number of channels, and `H` and `W` are the height and width of the data. Statistics are "
+            "computed for every group of channels over `C`, `H`, and `W`. For non-image cases, the dimensions are "
+            "in the form of `(N x C x D1 x D2 ... Dn)`.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .Input(1, "scale", "Scale tensor of shape `(C)`.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Input(2, "bias", "Bias tensor of shape `(C)`.", "T", OpSchema::Single, true, 1, OpSchema::Differentiable)
+        .Output(
+            0,
+            "Y",
+            "The output tensor of the same shape as `X`.",
+            "T",
+            OpSchema::Single,
+            true,
+            1,
+            OpSchema::Differentiable)
+        .TypeConstraint("T", OpSchema::all_float_types_ir4(), "Constrain input and output types to float tensors.")
+        .SetNodeDeterminism(OpSchema::NodeDeterminism::Deterministic)
+        .SetContextDependentFunctionBodyBuilder(
+            [](const FunctionBodyBuildContext& ctx, const OpSchema& schema, FunctionProto& functionProto) {
+              // GroupNormalization <epsilon, num_groups> (X, scale, bias) => (Y)
+              auto* tp = ctx.getInputType(0);
+              if ((tp == nullptr) || (!tp->has_tensor_type()))
+                return false;
+              int64_t in_type = tp->tensor_type().elem_type();
+
+              auto* epsilon_attr = ctx.getAttribute("epsilon");
+              float epsilon = (epsilon_attr != nullptr) ? epsilon_attr->f() : 1e-5f;
+              auto* num_groups_attr = ctx.getAttribute("num_groups");
+              if (num_groups_attr == nullptr)
+                return false;
+              int64_t num_groups = num_groups_attr->i();
+
+              auto stash_type_attr = ctx.getAttribute("stash_type");
+              int64_t stash_type = (stash_type_attr != nullptr)
+                  ? stash_type_attr->i()
+                  : static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT);
+              if ((stash_type != ONNX_NAMESPACE::TensorProto_DataType_FLOAT) &&
+                  (stash_type != ONNX_NAMESPACE::TensorProto_DataType_BFLOAT16) &&
+                  (stash_type != ONNX_NAMESPACE::TensorProto_DataType_FLOAT16) &&
+                  (stash_type != ONNX_NAMESPACE::TensorProto_DataType_DOUBLE))
+                return false; // Error
+
+              FunctionBuilder builder(functionProto);
+              builder.Const1D("FloatEpsilon", epsilon)
+                  .Add("Epsilon = Cast (FloatEpsilon)", "to", stash_type)
+                  .Add("XU = Cast (X)", "to", stash_type)
+                  .Add("XShape = Shape (XU)") // shape of input tensor: 1D tensor
+                  .Add("C = Shape <start = 1, end = 2> (X)")
+                  .Const1D("NumGroups", num_groups)
+                  .Add("GroupSize = Div (C, NumGroups)")
+                  .Add("N = Shape <start = 0, end = 1> (X)") // batch size
+                  .Add("InstanceShape = Shape <start = 2> (X)") // data instance shape
+
+                  // NewShape = [N, num_groups, group_size, H, W, (...)]
+                  .Add("NewShape = Concat <axis = 0> (N, NumGroups, GroupSize, InstanceShape)")
+                  .Add("XReshaped = Reshape (XU, NewShape)")
+
+                  // Flatten into 3D tensor: [N, num_groups, group_size x H x W (x ...)]
+                  .Add("Shape3D = Constant <value_ints = [0, 0, -1]> ()")
+                  .Add("X3D = Reshape (XReshaped, Shape3D)")
+
+                  // Calculate statistics
+                  .Const1D("Axes2", (int64_t)2)
+                  .Add("Mean = ReduceMean (X3D, Axes2)")
+                  .Add("Square = Mul (X3D, X3D)")
+                  .Add("MeanOfSquare = ReduceMean (Square, Axes2)")
+                  .Add("SquareOfMean = Mul (Mean, Mean)")
+                  .Add("Var = Sub (MeanOfSquare, SquareOfMean)")
+                  .Add("VarPlusEpsilon = Add (Var, Epsilon)")
+                  .Add("StdDev = Sqrt (VarPlusEpsilon)")
+                  .Add("Deviation = Sub (X3D, Mean)")
+                  .Add("NormalizedU = Div (Deviation, StdDev)")
+
+                  // Reshape to [N, C, H x W (x ...)] and cast to original type
+                  .Add("NormalizedOriginalShape = Reshape (NormalizedU, XShape)")
+                  .Add("NormalizedNC = Reshape (NormalizedOriginalShape, Shape3D)")
+                  .Add("NormalizedT = Cast (NormalizedNC)", "to", in_type)
+
+                  // Reshape scale and bias to [1, C, 1] for broadcasting
+                  .Add("ScaleShape = Constant <value_ints = [1, -1, 1]> ()")
+                  .Add("ScaleT = Cast (scale)", "to", in_type)
+                  .Add("BiasT = Cast (bias)", "to", in_type)
+                  .Add("ScaleReshaped = Reshape (ScaleT, ScaleShape)")
+                  .Add("BiasReshaped = Reshape (BiasT, ScaleShape)")
+
+                  // Calculate scaled and biased output
+                  .Add("Scaled = Mul (ScaleReshaped, NormalizedT)")
+                  .Add("Biased = Add (Scaled, BiasReshaped)")
+                  .Add("Y = Reshape (Biased, XShape)");
+
+              schema.BuildFunction(functionProto);
+              return true;
+            }));
+
+static constexpr const char* RMSNormalization_ver23_doc = R"DOC(
+      This is RMS normalization defined in ONNX as function as described in the paper https://arxiv.org/pdf/1910.07467.
+      The overall computation can be split into two stages. The root mean squared norm is taken over the last D dimensions,
+      where D is the dimension of normalized_shape. For example, if normalized_shape is (3, 5) (a 2-dimensional shape),
+      the rms norm is computed over the last 2 dimensions of the input. The computation required by standardization can be
+      described by the following equations.
+      ```
+      XSquared = Mul(X, X)
+      XSquaredMean = ReduceMean<axes=normalized_axes>(XSquared)
+      MeanSquareEpsilon = Add(XSquaredMean, epsilon)
+      RMS = Sqrt(MeanSquareEpsilon)
+      Normalized = Div(X, RMS)
+      ```
+      where `normalized_axes` is `[axis, ..., rank of X - 1]`. The variables `RMS` stand for root mean square,
+      Depending on `stash_type` attribute, the actual computation
+      must happen in different floating-point precision.
+      For example, if `stash_type` is 1, this operator casts
+      all input variables to 32-bit float, perform the computation, and
+      finally cast `Normalized` back to the original type of `X`.
+      The second stage then scales the outcome of the first stage using:
+      ```
+      Y= Mul(Normalized, Scale)
+      ```
+      Let `d[i]` indicate the i-th dimension of `X`.
+      If `X`'s shape is `[d[0], ..., d[axis-1], d[axis], ..., d[rank-1]]`,
+      the shape of `RMS` is `[d[0], ..., d[axis-1], 1, ..., 1]`.
+      `Y` and `X` have the same shape. This operator supports unidirectional broadcasting
+      (`Scale` should be unidirectional broadcastable to tensor `X`);
+      for more details please check [the doc](Broadcasting.md).
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    RMSNormalization,
+    23,
+    OpSchema()
+        .SetDoc(RMSNormalization_ver23_doc)
+        .Attr(
+            "axis",
+            "The first normalization dimension. If rank(X) is r, axis' allowed range is [-r, r). "
+            "Negative value means counting dimensions from the back.",
+            AttributeProto::INT,
+            static_cast<int64_t>(-1))
+        .Attr("epsilon", "The epsilon value to use to avoid division by zero.", AttributeProto::FLOAT, 1e-5f)
+        .Attr(
+            "stash_type",
+            "The floating-point precision used in stage one of the computation.",
+            AttributeProto::INT,
+            static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT))
+        .Input(
+            0,
+            "X",
+            "The input tensor to be normalized. "
+            "In general, the shape is (D1, D2, ... , Dn) for n-dimensional data, where "
+            "the root mean squared norm is taken over the last D dimensions, D is determined by the axis attribute.",
+            "T")
+        .Input(1, "scale", "Scale tensor. Scale tensor shape should be broadcastable to the normalized shape.", "V")
+        .Output(0, "Y", "Output data tensor. Same shape as X", "V")
+        .TypeConstraint(
+            "T",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain input X type to float tensors.")
+        .TypeConstraint(
+            "V",
+            {"tensor(float16)", "tensor(float)", "tensor(double)", "tensor(bfloat16)"},
+            "Constrain output Y and scale type to float tensors.")
+        .TypeAndShapeInferenceFunction([](ONNX_NAMESPACE::InferenceContext& ctx) {
+          propagateShapeAndTypeFromFirstInput(ctx);
+          if (!hasNInputShapes(ctx, 1)) {
+            return;
+          }
+          auto& input_shape = ctx.getInputType(0)->tensor_type().shape();
+          int64_t input_ndim = input_shape.dim_size();
+          int64_t axis = -1;
+          auto axis_proto = ctx.getAttribute("axis");
+          if (axis_proto) {
+            axis = axis_proto->i();
+          }
+          if (axis < 0) {
+            // Convert negative axis value to equivalent
+            // positive value.
+            axis += input_ndim;
+          }
+          if (axis < 0) {
+            fail_shape_inference(
+                "Unexpected axis value (",
+                axis,
+                ") rank of first input is ",
+                input_ndim,
+                " in ",
+                ctx.getDisplayName(),
+                ".");
+          }
+        })
+        .SetNodeDeterminism(OpSchema::NodeDeterminism::Deterministic)
+        .SetContextDependentFunctionBodyBuilder([](const FunctionBodyBuildContext& ctx,
+                                                   const OpSchema& schema,
+                                                   FunctionProto& functionProto) {
+          // RMSNormalization <axis, epsilon, stash_type> (X, Scale) => (Y)
+          auto* tp = ctx.getInputType(0);
+          if ((tp == nullptr) || (!tp->has_tensor_type()))
+            return false;
+          int64_t T = tp->tensor_type().elem_type();
+
+          auto type_attr = ctx.getAttribute("stash_type");
+          int64_t U = (type_attr != nullptr) ? type_attr->i()
+                                             : static_cast<int64_t>(ONNX_NAMESPACE::TensorProto_DataType_FLOAT);
+          if ((U != ONNX_NAMESPACE::TensorProto_DataType_FLOAT) &&
+              (U != ONNX_NAMESPACE::TensorProto_DataType_BFLOAT16) &&
+              (U != ONNX_NAMESPACE::TensorProto_DataType_FLOAT16) && (U != ONNX_NAMESPACE::TensorProto_DataType_DOUBLE))
+            return false; // Error
+
+          auto* axis_attr = ctx.getAttribute("axis");
+          int64_t axis = (axis_attr != nullptr) ? axis_attr->i() : -1;
+          auto* epsilon_attr = ctx.getAttribute("epsilon");
+          float epsilon = (epsilon_attr != nullptr) ? epsilon_attr->f() : 1e-5f;
+
+          FunctionBuilder builder(functionProto);
+          builder.Const("FloatEpsilon", ToTensor<float>(epsilon))
+              .Add("Epsilon = Cast (FloatEpsilon)", "to", U)
+              .Add("XShape = Shape (X)") // shape of input tensor: 1D tensor
+              .Add("Rank = Size (XShape)") // rank of input tensor: scalar
+              .Const("Axis", axis) // axis : scalar
+              .Add(
+                  axis >= 0 // number of axes that are reduced =
+                      ? "PosAxis = Identity (Axis)" // axis: scalar
+                      : "PosAxis = Add (Rank, Axis)") // rank + axis : scalar
+              .Const("One", (int64_t)1)
+              .Add("ReduceAxes = Range(PosAxis, Rank, One)")
+              .Add("XU = Cast (X)", "to", U);
+          builder.Add("XSquared = Mul (XU, XU)")
+              .Add("XSquaredMean = ReduceMean (XSquared, ReduceAxes)")
+              .Add("MeanSquareEpsilon = Add (XSquaredMean, Epsilon)")
+              .Add("RMS = Sqrt (MeanSquareEpsilon)")
+              .Add("Normalized = Div (XU, RMS)")
+              .Add("NormalizedT = Cast (Normalized)", "to", T);
+          builder.Add("Y = Mul (NormalizedT, scale)");
+
+          schema.BuildFunction(functionProto);
+          return true;
+        }));
+
+static constexpr const char* RotaryEmbedding_ver23_doc = R"DOC(
+RotaryEmbedding is the implementation of rotary positional embeddings (RoPE) based on the paper https://arxiv.org/pdf/2104.09864.
+The key advantage of RoPE is that it allows the model to understand both the absolute position of a token and the relative distances
+between tokens. This is achieved through a rotational mechanism where the extent of rotation is computed based on the token's absolute position (position_ids).
+
+The rotational mechanism is defined by sine and cosine functions that are used to represent the rotation angles.
+For each token in the sequence, its positional embedding is computed by rotating its embedding vector. This is done by splitting the
+embedding vector either into two halves or interleaving every alternate token and applying the rotation matrix to each half of the embedding vector.
+The rotation matrix is parameterized by the token's position in the sequence. The rotated halves of the embedding vector are concatenated
+to form the final positional embedding for each token. The rotated positional embeddings are used in the self-attention mechanism.
+The rotation ensures that the model captures both absolute and relative positional information.
+
+Rotary embeddings are defined using the following algorithm:
+
+```python
+def rotary_embedding(
+    input: np.ndarray,
+    cos_cache: np.ndarray,
+    sin_cache: np.ndarray,
+    position_ids: np.ndarray | None = None,
+    interleaved=None,
+    rotary_embedding_dim=None,
+    num_heads=None,
+) -> np.ndarray:
+    original_input_shape = input.shape
+    # First ensure input to be processed has shape [batch_size, seq_len, num_heads, head_size]
+    if len(input.shape) == 4:
+        input = np.transpose(input, (0, 2, 1, 3))
+    batch_size = input.shape[0]
+    sequence_length = input.shape[1]
+    if len(input.shape) == 3:
+        hidden_size = input.shape[2]
+        assert num_heads != 0
+        head_size = int(hidden_size / num_heads)
+        new_shape = [batch_size, sequence_length, num_heads, head_size]
+        input = np.reshape(input, new_shape)
+    assert len(input.shape) == 4
+    head_size = input.shape[3]
+
+    # Fully or partially perform rotation on input based on rotary_embedding_dim attribute
+    if rotary_embedding_dim is None or rotary_embedding_dim == 0:
+        # If rotary_embedding_dim not provided, perform full rotation by using head_size
+        rotary_embedding_dim = head_size
+    x_rotate = input[:, :, :, :rotary_embedding_dim]
+    x_not_rotate = input[:, :, :, rotary_embedding_dim:]
+    rotary_embedding_dim_half = int(rotary_embedding_dim / 2)
+
+    # Retrieve sin and cos caches using position ids
+    if position_ids is not None:
+        cos_cache = cos_cache[
+            position_ids
+        ]  # Shape: [batch_size, sequence_length, rotary_embedding_dim/2]
+        sin_cache = sin_cache[
+            position_ids
+        ]  # Shape: [batch_size, sequence_length, rotary_embedding_dim/2]
+
+    # Shape: [batch_size, sequence_length, rotary_embedding_dim/2]
+    if cos_cache.shape[-1] != rotary_embedding_dim_half:
+        raise ValueError(
+            f"Last dimension of cos cache ({cos_cache.shape[-1]}) does not match rotary_embedding_dim/2 ({rotary_embedding_dim_half})."
+        )
+    if sin_cache.shape[-1] != rotary_embedding_dim_half:
+        raise ValueError(
+            f"Last dimension of sin cache ({sin_cache.shape[-1]}) does not match rotary_embedding_dim/2 ({rotary_embedding_dim_half})."
+        )
+
+    cos_cache = np.expand_dims(
+        cos_cache, axis=2
+    )  # Shape: [batch_size, sequence_length, 1, rotary_embedding_dim/2]
+    sin_cache = np.expand_dims(
+        sin_cache, axis=2
+    )  # Shape: [batch_size, sequence_length, 1, rotary_embedding_dim/2]
+
+    # Either divide the input in halves or interleave (based on interleaved attribute)
+    if interleaved:
+        x1 = x_rotate[:, :, :, 0::2]
+        x2 = x_rotate[:, :, :, 1::2]
+    else:
+        x1, x2 = np.split(x_rotate, 2, axis=-1)
+
+    # Calculate real and imaginary values
+    real = (cos_cache * x1) - (sin_cache * x2)
+    imag = (sin_cache * x1) + (cos_cache * x2)
+
+    # Inserted rotated embeddings back to the original input
+    if interleaved:
+        # x_rotate[:, :, :, 0::2] = real
+        # x_rotate[:, :, :, 1::2] = imag
+        real = np.expand_dims(real, axis=-1)
+        imag = np.expand_dims(imag, axis=-1)
+        x_rotate_concat = np.concatenate((real, imag), axis=-1)
+        x_rotate = np.reshape(x_rotate_concat, x_rotate.shape)
+    else:
+        x_rotate = np.concatenate((real, imag), axis=-1)
+    output = np.concatenate((x_rotate, x_not_rotate), axis=-1)
+    if len(original_input_shape) == 3:
+        output = np.reshape(output, original_input_shape)
+    else:
+        output = np.transpose(output, (0, 2, 1, 3))
+    return output
+```
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    RotaryEmbedding,
+    23,
+    OpSchema()
+        .SetDoc(RotaryEmbedding_ver23_doc)
+        .Attr(
+            "interleaved",
+            "Rotate using interleaved pattern. Default value is 0 (False).",
+            AttributeProto::INT,
+            static_cast<int64_t>(0))
+        .Attr(
+            "rotary_embedding_dim",
+            "Rotary embedding dimension used to apply partial rotary embeddings.",
+            AttributeProto::INT,
+            static_cast<int64_t>(0))
+        .Attr(
+            "num_heads",
+            "Number of attention heads. Must be provided when input is a 3D tensor. ",
+            AttributeProto::INT,
+            OPTIONAL_VALUE)
+        .Input(
+            0,
+            "X",
+            "The input tensor representing the token embeddings. "
+            "4D tensor with shape `(batch_size, num_heads, sequence_length, head_size)` or 3D tensor with shape `(batch_size, sequence_length, hidden_size)`. "
+            "For cases with a 4D input tensor, `head_size` has to be even. For cases with a 3D input tensor, `num_heads` attribute must be provided and "
+            "`hidden_size` must be an even multiple of `num_heads` where `hidden_size = num_heads * head_size`",
+            "T")
+        .Input(
+            1,
+            "cos_cache",
+            "The cosine values for the rotation. "
+            "2D tensor with shape `(max_position_id_plus_1, head_size / 2)` for full rotation or `(max_position_id_plus_1, rotary_embedding_dim / 2)` "
+            "for partial rotation when `position_ids` are provided. 3D tensor with shape `(batch_size, sequence_length, head_size / 2)` "
+            "for full rotation or `(batch_size, sequence_length, rotary_embedding_dim / 2)` for partial rotation when `position_ids` are not provided. "
+            "`max_position_id_plus_1` is a parameter to the model.",
+            "T")
+        .Input(
+            2,
+            "sin_cache",
+            "The sine values for the rotation. "
+            "2D tensor with shape `(max_position_id_plus_1, head_size / 2)` for full rotation or `(max_position_id_plus_1, rotary_embedding_dim / 2)` "
+            "for partial rotation when `position_ids` are provided. 3D tensor with shape `(batch_size, sequence_length, head_size / 2)` "
+            "for full rotation or `(batch_size, sequence_length, rotary_embedding_dim / 2)` for partial rotation when `position_ids` are not provided. "
+            "`max_position_id_plus_1` is a parameter to the model.",
+            "T")
+        .Input(
+            3,
+            "position_ids",
+            "The position indices for the tokens. 2D tensor with shape `(batch_size, sequence_length)`",
+            "M",
+            OpSchema::Optional)
+        .Output(0, "Y", "Tensor with same shape as input.", "T")
+        .TypeConstraint(
+            "T",
+            {"tensor(float)", "tensor(float16)", "tensor(bfloat16)"},
+            "Constrain input and output types to float tensors.")
+        .TypeConstraint("M", {"tensor(int64)"}, "Constrain input and output types to integer tensors.")
+        .TypeAndShapeInferenceFunction([](ONNX_NAMESPACE::InferenceContext& ctx) {
+          propagateElemTypeFromInputToOutput(ctx, 0, 0);
+          propagateShapeFromInputToOutput(ctx, 0, 0);
+
+          // we need at least one input to have a shape for this inference.
+          if (!hasNInputShapes(ctx, 1)) {
+            return;
+          }
+
+          auto input_shape = ctx.getInputType(0)->tensor_type().shape();
+          if ((input_shape.dim_size() < 3) || (input_shape.dim_size() > 4)) {
+            fail_shape_inference("Input tensor must have at least 3 and at most 4 dimensions");
+          }
+
+          auto* num_heads_attr = ctx.getAttribute("num_heads");
+          if ((input_shape.dim_size() == 3) && (num_heads_attr == nullptr)) {
+            fail_shape_inference("Input shape is 3D, num_heads attribute must be provided");
+          }
+        })
+        .SetNodeDeterminism(OpSchema::NodeDeterminism::Deterministic)
+        .SetContextDependentFunctionBodyBuilder([](const FunctionBodyBuildContext& ctx,
+                                                   const OpSchema& schema,
+                                                   FunctionProto& functionProto) {
+          // RotaryEmbedding <scale, interleaved, rotary_embedding_dim, num_heads> (X, position_ids, cos_cache,
+          // sin_cache) => Y
+
+          int64_t int_type = ONNX_NAMESPACE::TensorProto_DataType_INT64;
+          auto* interleaved_attr = ctx.getAttribute("interleaved");
+          int64_t interleaved = (interleaved_attr != nullptr) ? interleaved_attr->i() : 0;
+          auto* rotary_embedding_dim_attr = ctx.getAttribute("rotary_embedding_dim");
+          int64_t rotary_embedding_dim = (rotary_embedding_dim_attr != nullptr) ? rotary_embedding_dim_attr->i() : 0;
+          auto* num_heads_attr = ctx.getAttribute("num_heads");
+          int64_t num_heads = (num_heads_attr != nullptr) ? num_heads_attr->i() : 0;
+
+          // Ensure that num_heads does not control reshaping of input tensor
+          // when input tensor is 4D
+          int64_t is_input_4d = 1;
+          auto* x_tp = ctx.getInputType(0);
+          if ((x_tp == nullptr) || (!x_tp->has_tensor_type()))
+            return false;
+          if (!(x_tp->tensor_type().has_shape())) {
+            return false;
+          }
+          if (x_tp->tensor_type().shape().dim_size() == 4) {
+            is_input_4d = 1;
+          } else if (x_tp->tensor_type().shape().dim_size() == 3) {
+            is_input_4d = 0;
+          } else {
+            return false;
+          }
+
+          FunctionBuilder builder(functionProto);
+          // Set input tensor to the correct shape if input shape is 3D
+          // NewShape = [batch_size, sequence_length, num_heads, head_size]
+
+          // Reshape tensor to 4D if input is 3D
+          builder.Const1D("Zero1D", (int64_t)0)
+              .Const1D("NumHeads", num_heads) // num_heads
+              .Const1D("NegOne", (int64_t)(-1)); // head_size, inferred from other dimensions
+
+          if (is_input_4d == 0) {
+            builder.Add("NewShape = Concat <axis = 0> (Zero1D, Zero1D, NumHeads, NegOne)")
+                .Add("XIn = Reshape (X, NewShape)"); // new shape of input tensor: 4D tensor
+          } else {
+            builder.Add("XIn = Transpose <perm = [0, 2, 1, 3]> (X)");
+          }
+
+          // Rotary embedding dimension is the value along which the input is to be split
+          // There are two cases for the rotary embedding dimension:
+          // 1. Complete rotation: rotary embedding dimension defaults to head_size, rotary_embedding_dim = cos.shape[3]
+          // * 2 or head_size
+          // 2. Partial rotation: rotary embedding dimension is provided, rotary_embedding_dim = rotary_embedding_dim
+
+          builder.Add("HeadSize = Shape <start = 3, end = 4> (XIn)");
+          if (rotary_embedding_dim > 0) {
+            builder.Const1D("RotaryEmbedDim", rotary_embedding_dim);
+          } else {
+            builder.Add("RotaryEmbedDim = Identity(HeadSize)");
+          }
+          builder.Const1D("Two1D", (int64_t)2)
+              .Add("NoRotateLength = Sub(HeadSize, RotaryEmbedDim)")
+              .Add("RotateSplitLengths = Concat <axis = 0> (RotaryEmbedDim, NoRotateLength)");
+          // shape of input to rotate = input[:,:,:,:rotary_embedding_dim]
+          // shape of input not to rotate = input[:,:,:,rotary_embedding_dim:]
+          builder.Add("XToRotate, XNoRotate = Split <axis = -1> (XIn, RotateSplitLengths)");
+
+          // Gather the cos and sine matrices from the respective caches using position ids if provided.
+          // Otherwise Gather op functions as an Identity op.
+          // Unsqueeze applied to make cos and sin matrices have dimensions that are
+          // valid for multiplication with input when is split. For cases where rotary_embedding_dim is provided,
+          // slice the matrix values until that index only
+          if (ctx.hasInput(3)) {
+            builder
+                .Add("CosCacheGather = Gather(cos_cache, position_ids)") // shape of cos matrix: [batch_size,
+                                                                         // sequence_length, head_size / 2]
+                .Add("SinCacheGather = Gather(sin_cache, position_ids)"); // shape of cos matrix: [batch_size,
+                                                                          // sequence_length, head_size / 2]
+          } else {
+            builder
+                .Add("CosCacheGather = Identity(cos_cache)") // shape of cos matrix: [batch_size, sequence_length,
+                                                             // head_size / 2]
+                .Add("SinCacheGather = Identity(sin_cache)"); // shape of cos matrix: [batch_size, sequence_length,
+                                                              // head_size / 2]
+          }
+
+          builder.Add("RotaryEmbedDimHalf = Div(RotaryEmbedDim, Two1D)")
+              .Add("RotaryEmbedDimHalfInt = Cast (RotaryEmbedDimHalf)", "to", int_type)
+              .Add(
+                  "CosCacheSliced = Slice(CosCacheGather, Zero1D, RotaryEmbedDimHalfInt, Two1D)") // shape of cos
+                                                                                                  // matrix:
+                                                                                                  // [batch_size,
+                                                                                                  // sequence_length,
+                                                                                                  // rotary_embedding_dim
+                                                                                                  // / 2]
+              .Add(
+                  "SinCacheSliced = Slice(SinCacheGather, Zero1D, RotaryEmbedDimHalfInt, Two1D)") // shape of sin
+                                                                                                  // matrix:
+                                                                                                  // [batch_size,
+                                                                                                  // sequence_length,
+                                                                                                  // rotary_embedding_dim
+                                                                                                  // / 2]
+              .Add("CosCacheUnsqueezed = Unsqueeze(CosCacheSliced, Two1D)") // shape of cos matrix: [batch_size,
+                                                                            // sequence_length, 1, rotary_embedding_dim
+                                                                            // / 2]
+              .Add("SinCacheUnsqueezed = Unsqueeze(SinCacheSliced, Two1D)"); // shape of sin matrix: [batch_size,
+                                                                             // sequence_length, 1, rotary_embedding_dim
+                                                                             // / 2]
+
+          // Create slices of inputs to multiply with sin and cos matrices based on interleaved parameter
+          // Choose the correct slices based on interleaved parameter
+          // real = cos_x * x1 - sin_x * x2
+          // imag = sin_x * x1 + cos_x * x2
+          if (interleaved == 0) {
+            // For non-interleaved (basic) rotation, slices are created as follows,
+            builder.Add(
+                "X1, X2 = Split <axis = -1, num_outputs = 2> (XToRotate)"); // shape of X1 =
+                                                                            // input[:,:,:,:rotary_embedding_dim/2],
+                                                                            // X2 =
+                                                                            // input[:,:,:,rotary_embedding_dim/2:rotary_embedding_dim]
+          } else {
+            // For interleaved rotation, slices are created as follows,
+            builder.Const1D("One1D", (int64_t)1)
+                .Const1D("AxesRotaryDim", (int64_t)3)
+                .Add("RotaryEmbedDimInclusive = Add(RotaryEmbedDim, One1D)")
+                .Add(
+                    "X1 = Slice(XToRotate, Zero1D, RotaryEmbedDim, AxesRotaryDim, Two1D)") // shape of X1 =
+                                                                                           // input[:,:,:,0:rotary_embedding_dim:2]
+                .Add(
+                    "X2 = Slice(XToRotate, One1D, RotaryEmbedDimInclusive, AxesRotaryDim, Two1D)"); // shape of
+                                                                                                    // X2 =
+                                                                                                    // input[:,:,:,1:rotary_embedding_dim:2]
+          }
+
+          builder.Add("CosX1 = Mul(CosCacheUnsqueezed, X1)")
+              .Add("SinX2 = Mul(SinCacheUnsqueezed, X2)")
+              .Add("Real = Sub(CosX1, SinX2)")
+              .Add("SinX1 = Mul(SinCacheUnsqueezed, X1)")
+              .Add("CosX2 = Mul(CosCacheUnsqueezed, X2)")
+              .Add("Imaginary = Add(SinX1, CosX2)");
+
+          // Insert the real and imaginary values into the original input to be rotated based on interleaved parameter
+          if (interleaved == 0) {
+            builder.Add("XRotated = Concat <axis = -1> (Real, Imaginary)");
+          } else {
+            builder
+                .Add("RealInterleave = Unsqueeze(Real, NegOne)") // shape of indices =
+                                                                 // input[:,:,:,0:rotary_embedding_dim:2, 1]
+                .Add("ImaginaryInterleave = Unsqueeze(Imaginary, NegOne)") // shape of indices =
+                                                                           // input[:,:,:,1:rotary_embedding_dim+1:2, 1]
+                .Add("XRotatedInterleavedConcat = Concat <axis = -1> (RealInterleave, ImaginaryInterleave)")
+                .Add("XRotatedShape = Shape(XToRotate)")
+                .Add("XRotated = Reshape(XRotatedInterleavedConcat, XRotatedShape)");
+          }
+
+          // Combine rotated parts with non-rotated parts
+          builder.Add("XConcat = Concat <axis = -1> (XRotated, XNoRotate)");
+
+          if (is_input_4d == 0) {
+            builder.Add("YTransposed = Identity(XConcat)");
+          } else {
+            builder.Add("YTransposed = Transpose <perm = [0, 2, 1, 3]> (XConcat)");
+          }
+          // Reshape back to 3D shape if input is a 3D tensor
+          builder.Add("XShape = Shape(X)").Add("Y = Reshape(YTransposed, XShape)");
+
+          schema.BuildFunction(functionProto);
+          return true;
+        }));
+
+static constexpr const char* Attention_ver24_doc = R"DOC(
+
+Computes scaled dot product attention on query, key and value tensors, using an optional attention mask if passed.
+
+This operator covers self and cross variants of the attention operation based on sequence lengths of K, Q and V.
+
+For self attention, `kv_sequence_length` equals to `q_sequence_length`.
+
+For cross attention, query and key might have different lengths.
+
+This operator also covers the 3 following variants based on the number of heads:
+1) Multi-headed Attention (MHA): Described in the paper https://arxiv.org/pdf/1706.03762, `q_num_heads = kv_num_heads`.
+2) Group-query Attention (GQA): Described in the paper https://arxiv.org/pdf/2305.13245, `q_num_heads > kv_num_heads`, `q_num_heads % kv_num_heads == 0`.
+3) Multi-query Attention (MQA): Described in the paper https://arxiv.org/pdf/1911.02150, `q_num_heads > kv_num_heads`, `kv_num_heads=1`.
+
+Attention bias to be added is calculated based on `attn_mask` input and `is_causal` attribute:
+1) `attn_mask`: A boolean mask where a value of `True` indicates that the element should take part in attention or a float mask of the same type as query, key, value that is added to the attention score.
+2) If `is_causal` is set to `1`, attention scores above the diagonal are masked out, regardless of the `attn_mask` input.
+
+With respect to KV cache update, this operator allows the following two use cases:
+
+1) Cache update happens inside the Attention operator. In this case, the `K` and `V` inputs contain only the incoming
+tokens for the current autoregressive step, and the four optional inputs/outputs past and present key and value are
+all needed. The Attention op performs a Concat operation on the past and incoming key and value to form the present
+key and value, respectively. Note that this only works correctly for the special case where the past key and value
+do not contain padded tokens.
+2) Cache update happens outside the Attention operator (for example, through the `TensorScatter` operator). In this
+case, the `K` and `V` inputs correspond to the entire cache tensor, so the four optional inputs/outputs past and
+present key and value should not be used. An additional input `nonpad_kv_seqlen` of shape (batch_size,) may be
+provided to indicate the number of non-padding tokens in each sample of the batch to save unnecessary computation.
+Here, the kv_sequence dimension of `attn_mask` can be shorter than `K` and `V`, but still needs to be at least as long
+as the maximum value of `nonpad_kv_seqlen`.
+
+Both past and present state key/values are optional. They shall be used together, and not allowed to use only one of them.
+The following pattern is applied to the Q, K and V inputs after appropriate reshaping of K and V inputs based on sequence lengths and num heads provided:
+
+```
+  The following pattern is applied by this operator:
+      Q          K          V
+      |          |          |
+Q*sqrt(scale) K*sqrt(scale) |
+      |          |          |
+      |       Transpose     |
+      |          |          |
+      ---MatMul---          |
+            |               |
+ at_mask---Add              |
+            |               |
+  softcap (if provided)     |
+            |               |
+         Softmax            |
+            |               |
+            -----MatMul------
+                   |
+                   Y
+```
+
+)DOC";
+
+ONNX_OPERATOR_SET_SCHEMA(
+    Attention,
+    24,
+    OpSchema()
+        .SetDoc(Attention_ver24_doc)
+        .Attr(
+            "is_causal",
+            "If set to `1`, the attention masking is a lower triangular matrix when the mask is a square matrix. "
+            "The attention masking has the form of the upper left causal bias due to the alignment.",
+            AttributeProto::INT,
+            static_cast<int64_t>(0))
+        .Attr(
+            "scale",
+            "Scaling factor applied to $Q*K^T$. Default value is `1/sqrt(head_size)`. To prevent "
+            "[numerical overflow](https://tinyurl.com/sudb9s96), scale `Q`, `K` by `sqrt(scale)` before matmul.",
+            AttributeProto::FLOAT,
+            OPTIONAL_VALUE)
+        .Attr(
+            "q_num_heads",
+            "Number of heads of query. Must be used with 3D inputs of Q, K and V. ",
+            AttributeProto::INT,
+            OPTIONAL_VALUE)
+        .Attr(
+            "kv_num_heads",
+            "Number of heads of key and value. Must be used with 3D inputs of Q, K and V. ",
+            AttributeProto::INT,
+            OPTIONAL_VALUE)
+        .Attr(
+            "softmax_precision",
+            "The floating-point precision used in softmax computation. "
+            "If softmax precision is not provided, the same precision as the input of softmax (Q and K) is used.",
+            AttributeProto::INT,
+            OPTIONAL_VALUE)
+        .Attr(
+            "softcap",
+            "Softcap value for attention weights. Default value is 0.",
+            AttributeProto::FLOAT,
+            static_cast<float>(0))
+        .Attr(
+            "qk_matmul_output_mode",
+            "If set to `0`, qk_matmul_output is the output of qk matmul. "
+            "If set to `1`, qk_matmul_output includes the addition of the attention mask to the output of qk matmul. "
+            "If set to `2`, qk_matmul_output is the output after the softcap operation. "
+            "If set to `3`, qk_matmul_output is the output after the softmax operation. "
+            "Default value is 0.",
+            AttributeProto::INT,
+            static_cast<int64_t>(0))
+        .Input(
+            0,
+            "Q",
+            "Query tensor. "
+            "4D tensor with shape `(batch_size, q_num_heads, q_sequence_length, head_size)` or 3D tensor with shape `(batch_size, q_sequence_length, q_hidden_size)`. "
+            "For cases with a 3D input tensor, `q_hidden_size = q_num_heads * head_size`",
+            "T1")
+        .Input(
+            1,
+            "K",
+            "Key tensor. "
+            "4D tensor with shape `(batch_size, kv_num_heads, kv_sequence_length, head_size)` or 3D tensor with shape `(batch_size, kv_sequence_length, k_hidden_size)`. "
+            "For cases with a 3D input tensor, `k_hidden_size = kv_num_heads * head_size`",
+            "T1")
+        .Input(
+            2,
+            "V",
+            "Value tensor. "
+            "4D tensor with shape `(batch_size, kv_num_heads, kv_sequence_length, v_head_size)` or 3D tensor with shape `(batch_size, kv_sequence_length, v_hidden_size)`. "
+            "For cases with a 3D input tensor, `v_hidden_size = kv_num_heads * v_head_size`",
+            "T2")
+        .Input(
+            3,
+            "attn_mask",
+            "Attention mask. "
+            "Shape must be broadcastable to `(batch_size, q_num_heads, q_sequence_length, total_sequence_length)` "
+            "where `total_sequence_length = past_sequence_length + kv_sequence_length.` "
+            "The last dimension can also be shorter than `total_sequence_length` and will be padded to `total_sequence_length` with negative infinity. "
+            "Two types of masks are supported: a boolean mask where a value of `True` indicates that the element should take part in attention, "
+            "or a float mask of the same type as query, key, value that is added to the attention score.",
+            "U",
+            OpSchema::Optional)
+        .Input(
+            4,
+            "past_key",
+            "past state cache for key with shape `(batch_size, kv_num_heads, past_sequence_length, head_size)`",
+            "T1",
+            OpSchema::Optional)
+        .Input(
+            5,
+            "past_value",
+            "past state cache for value with shape `(batch_size, kv_num_heads, past_sequence_length, v_head_size)`",
+            "T2",
+            OpSchema::Optional)
+        .Input(
+            6,
+            "nonpad_kv_seqlen",
+            "A vector of integers of shape `(batch_size,)` that indicates the number of valid (ie, non-padding) "
+            "tokens in each sample. A padding mask can be derived from this. This should not be used together with "
+            "`past_key` and `past_value` inputs or `present_key` and `present_value` outputs "
+            "(See the KV cache use cases in the operator description).",
+            "tensor(int64)",
+            OpSchema::Optional)
+        .Output(
+            0,
+            "Y",
+            "The output tensor . "
+            "4D tensor with shape `(batch_size, q_num_heads, q_sequence_length, v_head_size)` or 3D tensor with shape `(batch_size, q_sequence_length, hidden_size)`. "
+            "For cases with a 3D input tensor, `hidden_size = q_num_heads * v_head_size`",
+            "T1")
+        .Output(
+            1,
+            "present_key",
+            "Updated key cache with shape `(batch_size, kv_num_heads, total_sequence_length, head_size)` "
+            "where `total_sequence_length = past_sequence_length + kv_sequence_length`.",
+            "T1",
+            OpSchema::Optional)
+        .Output(
+            2,
+            "present_value",
+            "Updated value cache with shape `(batch_size, kv_num_heads, total_sequence_length, v_head_size)` "
+            "where `total_sequence_length = past_sequence_length + kv_sequence_length`.",
+            "T2",
+            OpSchema::Optional)
+        .Output(
+            3,
+            "qk_matmul_output",
+            "The output of QK matmul. "
+            "4D tensor with shape `(batch_size, q_num_heads, q_sequence_length, total_sequence_length)` "
+            "where `total_sequence_length = past_sequence_length + kv_sequence_length`.",
+            "T1",
+            OpSchema::Optional)
+        .TypeConstraint("T1", OpSchema::all_float_types_ir4(), "Constrain Q and K inputs types to float tensors.")
+        .TypeConstraint("T2", OpSchema::all_float_types_ir4(), "Constrain V input types to float tensors.")
+        .TypeConstraint(
+            "U",
+            OpSchema::all_non_complex_numeric_types_plus_bool_ir4(),
+            "Constrain output 'mask' types to boolean tensors and input types.")
+        .TypeAndShapeInferenceFunction(defs::nn::utils::AttentionPropagateElemTypeFromInputToOutput)
+        .SetNodeDeterminism(OpSchema::NodeDeterminism::Deterministic)
+        .SetContextDependentFunctionBodyBuilder([](const FunctionBodyBuildContext& ctx,
+                                                   const OpSchema& schema,
+                                                   FunctionProto& functionProto) {
+          // ScaledDotProductAttention <scale, is_causal, q_num_heads, kv_numheads> (Q, K, V, attn_mask, past_key,
+          // past_value) => (Y, present_key?, present_value?)
+          int64_t int_type = ONNX_NAMESPACE::TensorProto_DataType_INT64;
+          int64_t float_type = ONNX_NAMESPACE::TensorProto_DataType_FLOAT;
+
+          // Get input types
+          auto* t_qk = ctx.getInputType(0);
+          if ((t_qk == nullptr) || (!t_qk->has_tensor_type()))
+            return false;
+          int64_t T1 = t_qk->tensor_type().elem_type();
+
+          // Determine precision types for Softmax
+          auto softmax_precision_attr = ctx.getAttribute("softmax_precision");
+          int64_t softmax_precision = (softmax_precision_attr != nullptr) ? softmax_precision_attr->i() : T1;
+          if ((softmax_precision != ONNX_NAMESPACE::TensorProto_DataType_FLOAT) &&
+              (softmax_precision != ONNX_NAMESPACE::TensorProto_DataType_BFLOAT16) &&
+              (softmax_precision != ONNX_NAMESPACE::TensorProto_DataType_FLOAT16) &&
+              (softmax_precision != ONNX_NAMESPACE::TensorProto_DataType_DOUBLE))
+            return false; // Error
+
+          // If shape is 3D, q_num_heads and kv_num_heads is provided,
+          // for 4D cases, set num_heads to zero for reshape purposes
+          auto* q_num_heads_attr = ctx.getAttribute("q_num_heads");
+          int64_t q_num_heads = (q_num_heads_attr != nullptr) ? q_num_heads_attr->i() : 0;
+          auto* kv_num_heads_attr = ctx.getAttribute("kv_num_heads");
+          int64_t kv_num_heads = (kv_num_heads_attr != nullptr) ? kv_num_heads_attr->i() : 0;
+
+          // Determine if input is 3D (requires reshape and transpose) or 4D (direct reshape)
+          bool is_3d_input = (q_num_heads > 0 && kv_num_heads > 0);
+
+          FunctionBuilder builder(functionProto);
+          builder
+              .Add("BatchSize = Shape <start = 0, end = 1> (Q)") // batch size
+              .Add("QSeqLen = Shape <start = -2, end = -1> (Q)") // q_sequence_length
+              .Add("KVSeqLen = Shape <start = -2, end = -1> (K)"); // kv_sequence_length
+
+          if (is_3d_input) {
+            // For 3D inputs: First reshape to [batch_size, seq_length, num_heads, head_size]
+            // then transpose to [batch_size, num_heads, seq_length, head_size]
+            builder
+                .Const1D("QNumHeadsAttr", q_num_heads) // q_num_heads from attrs
+                .Const1D("KVNumHeadsAttr", kv_num_heads) // kv_num_heads from attrs
+                .Const1D("NegOne", static_cast<int64_t>(-1)); // head_size, inferred from other dimensions
+
+            builder.Add("QIntermediateShape = Concat <axis = 0> (BatchSize, QSeqLen, QNumHeadsAttr, NegOne)")
+                .Add("KVIntermediateShape = Concat <axis = 0> (BatchSize, KVSeqLen, KVNumHeadsAttr, NegOne)")
+                .Add("QIntermediate = Reshape (Q, QIntermediateShape)")
+                .Add("KIntermediate = Reshape (K, KVIntermediateShape)")
+                .Add("VIntermediate = Reshape (V, KVIntermediateShape)")
+                // Then transpose to [batch_size, num_heads, seq_length, head_size]
+                .Add("QReshaped = Transpose <perm = [0, 2, 1, 3]> (QIntermediate)")
+                .Add("KReshaped = Transpose <perm = [0, 2, 1, 3]> (KIntermediate)")
+                .Add("VReshaped = Transpose <perm = [0, 2, 1, 3]> (VIntermediate)");
+          } else {
+            // For 4D inputs: Already in desired shape [batch_size, num_heads, seq_length, head_size]
+            builder.Add("QReshaped = Identity(Q)").Add("KReshaped = Identity(K)").Add("VReshaped = Identity(V)");
+          }
+
+          builder
+              .Add("QNumHeads = Shape <start = 1, end = 2> (QReshaped)") // q_num_heads
+              .Add("KVNumHeads = Shape <start = 1, end = 2> (KReshaped)"); // kv_num_heads
+
+          // Calculate scaling factor if scale attribute not provided
+          auto scale_attr = ctx.getAttribute("scale");
+          float scale = (scale_attr != nullptr) ? scale_attr->f() : static_cast<float>(1);
+          builder
+              .Add("QKHeadSize = Shape <start = 3, end = 4> (QReshaped)") // head_size for Q and K
+              .Add("QKHeadSizeF = Cast (QKHeadSize)", "to", float_type)
+              .Add("VHeadSize = Shape <start = 3, end = 4> (VReshaped)") // head_size for V
+              .Add("SqrtHeadSize = Sqrt(QKHeadSizeF)")
+              .Const1D("One1D", static_cast<int64_t>(1))
+              .Const1D("NegOne1D", static_cast<int64_t>(-1))
+              .Const1D("One1DF", static_cast<float>(1))
+              .Const1D("Zero1D", static_cast<int64_t>(0))
+              .Add("CalculatedScale = Div(One1DF, SqrtHeadSize)")
+              .Const("ScaleF", ToTensor<float>(scale))
+              .Add(scale_attr != nullptr ? "ScaleFactor = Identity(ScaleF)" : "ScaleFactor = Identity(CalculatedScale)")
+              .Add("ScaleFactorSqrt = Sqrt(ScaleFactor)")
+              .Add("ScaleFactorF = Cast (ScaleFactorSqrt)", "to", T1);
+
+          // Update key and value caches for past and present states
+
+          if (ctx.hasInput(4)) {
+            builder.Add("PresentKey = Concat <axis = 2> (past_key, KReshaped)");
+            builder.Add("PastKVSeqLen =  Shape <start = -2, end = -1> (past_key)");
+          } else {
+            builder.Add("PresentKey = Identity (KReshaped)");
+            builder.Const1D("PastKVSeqLen", static_cast<int64_t>(0));
+          }
+          if (ctx.hasOutput(1)) {
+            builder.Add("present_key = Identity (PresentKey)");
+          }
+
+          if (ctx.hasInput(5)) {
+            builder.Add("PresentValue = Concat <axis = 2> (past_value, VReshaped)");
+          } else {
+            builder.Add("PresentValue = Identity (VReshaped)");
+          }
+          if (ctx.hasOutput(2)) {
+            builder.Add("present_value = Identity (PresentValue)");
+          }
+
+          if (!defs::nn::utils::AttentionAppendFunctionCausalMask(ctx, builder, true))
+            return false;
+
+          // Add padding mask if kv_nonpad_seqlen is provided
+          if (ctx.hasInput(6)) {
+            builder
+                .Add("KVSeqLenExpanded = Unsqueeze(nonpad_kv_seqlen, One1D)") // [batch_size, 1]
+                .Add("KVSeqLen0D = Squeeze(KVSeqLen)")
+                .Const("Zero0D", static_cast<int64_t>(0))
+                .Const("One0D", static_cast<int64_t>(1))
+                .Add("Range = Range(Zero0D, KVSeqLen0D, One0D)") // [KVSeqLen,]
+                .Add("PaddingMaskBool = Less(Range, KVSeqLenExpanded)") // [batch_size, KVSeqLen]
+                .Add("PaddingMaskFloat = Where(PaddingMaskBool, ScalarZero, FloatNegInf)") // [batch_size, KVSeqLen]
+                .Add("PaddingMask3D = Unsqueeze(PaddingMaskFloat, One1D)") // [batch_size, 1, KVSeqLen]
+                .Add("PaddingMask4D = Unsqueeze(PaddingMask3D, One1D)") // [batch_size, 1, 1, KVSeqLen]
+                .Add("AttnBiasCausalPad = Add(AttnBiasCausalOrNot, PaddingMask4D)");
+          } else {
+            builder.Add("AttnBiasCausalPad = Identity(AttnBiasCausalOrNot)");
+          }
+          builder.Add("AttnBiasT = Cast (AttnBiasCausalPad)", "to", T1);
+
+          // Group Query Attention is applied if the following are satisfied
+          // 1) q_num_heads != kv_num_heads
+          // 2) q_num_heads % kv_num_heads == 0
+          // 3) kv_num_heads == k_num_heads == v_num_heads
+          builder.Add("NGQACond1 = Equal(QNumHeads, KVNumHeads)")
+              .Add("GQACond1 = Not(NGQACond1)")
+              .Add("DivNumHeads = Div(QNumHeads, KVNumHeads)")
+              .Add("IDivNumHeads = Cast(DivNumHeads)", "to", int_type)
+              .Add("RemainderNumHeads = Mod(QNumHeads, KVNumHeads)")
+              .Add("GQACond2 = Equal(RemainderNumHeads, Zero1D)")
+              .Add("GQACond = And(GQACond1, GQACond2)")
+              .Add("InterleaveDim = Where(GQACond, IDivNumHeads, One1D)");
+
+          // repeat kv (repeat_interleave)
+          builder.Const1D("Two1D", static_cast<int64_t>(2))
+              .Add("KUnsqueezed = Unsqueeze(PresentKey, Two1D)") // [B, Hk, 1, T, Dk]
+              .Add("VUnsqueezed = Unsqueeze(PresentValue, Two1D)"); // [B, Hk, 1, T, Dv]
+
+          // Build expand shape: [B, Hk, repeats, T, Dk]
+          builder
+              .Add("KExpandShape = Concat <axis = 0> (BatchSize, KVNumHeads, InterleaveDim, NewKVSeqLen, QKHeadSize)")
+              .Add("KExpanded = Expand(KUnsqueezed, KExpandShape)");
+          builder.Add("VExpandShape = Concat <axis = 0> (BatchSize, KVNumHeads, InterleaveDim, NewKVSeqLen, VHeadSize)")
+              .Add("VExpanded = Expand(VUnsqueezed, VExpandShape)");
+
+          // Reshape to [B, Hq, T, Dk] where Hq = Hk * repeats
+          builder.Add("KAttentionShape = Concat <axis = 0> (BatchSize, QNumHeads, NewKVSeqLen, QKHeadSize)")
+              .Add("VAttentionShape = Concat <axis = 0> (BatchSize, QNumHeads, NewKVSeqLen, VHeadSize)")
+              .Add("KAttentionInput = Reshape(KExpanded, KAttentionShape)")
+              .Add("VAttentionInput = Reshape(VExpanded, VAttentionShape)");
+
+          // The following pattern is applied
+          //      Q          K          V
+          //      |          |          |
+          //     Q*scale    K*scale     |
+          //      |          |          |
+          //      |       Transpose     |
+          //      |          |          |
+          //      ---MatMul---          |
+          //            |               |
+          // at_mask---Add              |
+          //  softcap (if provided)     |
+          //            |               |
+          //            |               |
+          //         Softmax            |
+          //            |               |
+          //            -----MatMul------
+          //                    |
+          //                    Y
+          builder.Add("KTranspose = Transpose <perm = [0, 1, 3, 2]> (KAttentionInput)")
+              .Add("QScaled = Mul(QReshaped, ScaleFactorF)")
+              .Add("KScaled = Mul(KTranspose, ScaleFactorF)")
+              .Add("QKAttnWeight = MatMul(QScaled, KScaled)")
+              .Add("QKAttnCast = Cast (QKAttnWeight)", "to", T1)
+              .Add("QKAttnWeightWithBias = Add(QKAttnCast, AttnBiasT)");
+
+          // Apply softcap if provided
+          auto* softcap_attr = ctx.getAttribute("softcap");
+          float softcap_val = (softcap_attr != nullptr) ? softcap_attr->f() : static_cast<float>(0);
+          if (softcap_val != 0) {
+            builder.Const1D("Softcap", softcap_val)
+                .Add("SoftcapF = Cast (Softcap)", "to", T1)
+                .Add("SoftcapDiv = Div(QKAttnWeightWithBias, SoftcapF)")
+                .Add("SoftcapTanh = Tanh(SoftcapDiv)")
+                .Add("QKAttnWeightSoftcap = Mul(SoftcapTanh, SoftcapF)");
+          } else {
+            builder.Add("QKAttnWeightSoftcap = Identity(QKAttnWeightWithBias)");
+          }
+          builder.Add("SoftmaxCast = Cast (QKAttnWeightSoftcap)", "to", softmax_precision)
+              .Add("AttnWeightSoftmax = Softmax (SoftmaxCast)")
+              .Add("SoftmaxOut = Cast (AttnWeightSoftmax)", "to", T1);
+
+          // QK MatMul output if required
+          auto* qk_matmul_output_mode_attr = ctx.getAttribute("qk_matmul_output_mode");
+          int64_t qk_matmul_output_mode = (qk_matmul_output_mode_attr != nullptr) ? qk_matmul_output_mode_attr->i() : 0;
+          if (ctx.hasOutput(3)) {
+            if (qk_matmul_output_mode == 1) {
+              builder.Add("qk_matmul_output = Identity(QKAttnWeightWithBias)");
+            } else if (qk_matmul_output_mode == 2) {
+              builder.Add("qk_matmul_output = Identity(QKAttnWeightSoftcap)");
+            } else if (qk_matmul_output_mode == 3) {
+              builder.Add("qk_matmul_output = Identity(AttnWeightSoftmax)");
+            } else {
+              builder.Add("qk_matmul_output = Identity(QKAttnWeight)");
+            }
+          }
+
+          builder.Add("YPreReshape = MatMul(SoftmaxOut, VAttentionInput)");
+          // Reshape Y to 3D if input is a 3D tensor
+          if (is_3d_input) {
+            builder.Add("YTranspose = Transpose <perm = [0, 2, 1, 3]> (YPreReshape)")
+                .Add("YNewShape = Concat <axis = 0> (Zero1D, Zero1D, NegOne)")
+                .Add("Y = Reshape(YTranspose, YNewShape)");
+          } else {
+            builder.Add("Y = Identity(YPreReshape)");
+          }
+
+          schema.BuildFunction(functionProto);
+          return true;
+        }));
+} // namespace ONNX_NAMESPACE