morphogen 1.0.0__py3-none-any.whl

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (381) hide show
  1. morphogen/__init__.py +60 -0
  2. morphogen/__main__.py +7 -0
  3. morphogen/_platform.py +55 -0
  4. morphogen/_public.py +153 -0
  5. morphogen/_utils.py +80 -0
  6. morphogen/_version.py +1 -0
  7. morphogen/analysis/__init__.py +174 -0
  8. morphogen/analysis/anisotropy.py +135 -0
  9. morphogen/analysis/basic.py +38 -0
  10. morphogen/analysis/cells.py +54 -0
  11. morphogen/analysis/connectivity.py +156 -0
  12. morphogen/analysis/correlation.py +195 -0
  13. morphogen/analysis/covariance.py +80 -0
  14. morphogen/analysis/fractal.py +54 -0
  15. morphogen/analysis/measures.py +188 -0
  16. morphogen/analysis/morphology.py +265 -0
  17. morphogen/analysis/particles.py +160 -0
  18. morphogen/analysis/percolation.py +2034 -0
  19. morphogen/analysis/power_laws.py +143 -0
  20. morphogen/analysis/random_sets.py +351 -0
  21. morphogen/analysis/stereology.py +289 -0
  22. morphogen/analysis/surface.py +107 -0
  23. morphogen/analysis/topology.py +92 -0
  24. morphogen/automata/__init__.py +74 -0
  25. morphogen/automata/engine.py +211 -0
  26. morphogen/automata/growth.py +686 -0
  27. morphogen/automata/lattice.py +143 -0
  28. morphogen/automata/reaction.py +255 -0
  29. morphogen/automata/rules.py +353 -0
  30. morphogen/automata/tilings.py +1715 -0
  31. morphogen/cli.py +3526 -0
  32. morphogen/config.py +2167 -0
  33. morphogen/contact/__init__.py +113 -0
  34. morphogen/contact/experiments.py +368 -0
  35. morphogen/contact/hertz.py +104 -0
  36. morphogen/contact/kernels.py +827 -0
  37. morphogen/contact/periodic.py +278 -0
  38. morphogen/contact/problem.py +578 -0
  39. morphogen/contact/surfaces.py +310 -0
  40. morphogen/coupling/__init__.py +43 -0
  41. morphogen/coupling/ageing.py +143 -0
  42. morphogen/coupling/diffusion.py +226 -0
  43. morphogen/coupling/fenicsx.py +484 -0
  44. morphogen/coupling/oxidation.py +447 -0
  45. morphogen/coupling/plates.py +247 -0
  46. morphogen/design/__init__.py +51 -0
  47. morphogen/design/csp.py +616 -0
  48. morphogen/design/frames.py +277 -0
  49. morphogen/design/search.py +287 -0
  50. morphogen/design/tiles.py +336 -0
  51. morphogen/distributions.py +312 -0
  52. morphogen/domain.py +203 -0
  53. morphogen/dynamics/__init__.py +179 -0
  54. morphogen/dynamics/model.py +638 -0
  55. morphogen/dynamics/openradioss.py +643 -0
  56. morphogen/dynamics/results.py +515 -0
  57. morphogen/fracture/__init__.py +170 -0
  58. morphogen/fracture/bulk.py +349 -0
  59. morphogen/fracture/cohesive.py +1614 -0
  60. morphogen/fracture/ductile.py +557 -0
  61. morphogen/fracture/lefm.py +1168 -0
  62. morphogen/fracture/mixed.py +1178 -0
  63. morphogen/fracture/periodic.py +733 -0
  64. morphogen/fracture/phasefield.py +714 -0
  65. morphogen/fracture/phasefield_finite.py +368 -0
  66. morphogen/fracture/surface.py +572 -0
  67. morphogen/fracture/toughness.py +566 -0
  68. morphogen/gpu.py +108 -0
  69. morphogen/gui/__init__.py +8 -0
  70. morphogen/gui/api.py +1927 -0
  71. morphogen/gui/desktop.py +387 -0
  72. morphogen/gui/icon.png +0 -0
  73. morphogen/gui/index.html +1909 -0
  74. morphogen/gui/server.py +229 -0
  75. morphogen/gui/tools/__init__.py +629 -0
  76. morphogen/gui/tools/compare.py +149 -0
  77. morphogen/gui/tools/contact.py +391 -0
  78. morphogen/gui/tools/couplings.py +1085 -0
  79. morphogen/gui/tools/crackfront.py +245 -0
  80. morphogen/gui/tools/design.py +224 -0
  81. morphogen/gui/tools/dynamics.py +824 -0
  82. morphogen/gui/tools/fracture.py +2586 -0
  83. morphogen/gui/tools/interop.py +1654 -0
  84. morphogen/gui/tools/learning.py +595 -0
  85. morphogen/gui/tools/mechanics.py +3881 -0
  86. morphogen/gui/tools/nonlocal_damage.py +1321 -0
  87. morphogen/gui/tools/phasefield.py +215 -0
  88. morphogen/gui/tools/physics.py +597 -0
  89. morphogen/gui/tools/stability.py +1756 -0
  90. morphogen/gui/tools/statistics.py +1408 -0
  91. morphogen/gui/viewer.js +1100 -0
  92. morphogen/homogenization/__init__.py +210 -0
  93. morphogen/homogenization/acoustics.py +566 -0
  94. morphogen/homogenization/amg.py +1005 -0
  95. morphogen/homogenization/apparent.py +1046 -0
  96. morphogen/homogenization/behaviours.cu +2285 -0
  97. morphogen/homogenization/behaviours.py +944 -0
  98. morphogen/homogenization/beremin.py +263 -0
  99. morphogen/homogenization/bifurcation.py +1085 -0
  100. morphogen/homogenization/bloch.py +507 -0
  101. morphogen/homogenization/bounds.py +226 -0
  102. morphogen/homogenization/core.py +458 -0
  103. morphogen/homogenization/coupled.py +1135 -0
  104. morphogen/homogenization/crystal.py +2967 -0
  105. morphogen/homogenization/dilatation.py +454 -0
  106. morphogen/homogenization/elements.py +157 -0
  107. morphogen/homogenization/fatigue.py +768 -0
  108. morphogen/homogenization/fe.py +1739 -0
  109. morphogen/homogenization/fenicsx.py +307 -0
  110. morphogen/homogenization/fft.py +499 -0
  111. morphogen/homogenization/fft_nonlinear.py +391 -0
  112. morphogen/homogenization/finite.py +613 -0
  113. morphogen/homogenization/flow.py +361 -0
  114. morphogen/homogenization/frames.py +1125 -0
  115. morphogen/homogenization/gpu.py +1241 -0
  116. morphogen/homogenization/harmonic.py +427 -0
  117. morphogen/homogenization/identification.py +579 -0
  118. morphogen/homogenization/kernels.py +760 -0
  119. morphogen/homogenization/laws.py +2061 -0
  120. morphogen/homogenization/materials.py +1080 -0
  121. morphogen/homogenization/mfront.py +589 -0
  122. morphogen/homogenization/networks.py +880 -0
  123. morphogen/homogenization/nonlinear.py +2612 -0
  124. morphogen/homogenization/ntfa.py +577 -0
  125. morphogen/homogenization/paths.py +476 -0
  126. morphogen/homogenization/photonic.py +467 -0
  127. morphogen/homogenization/poroelastic.py +212 -0
  128. morphogen/homogenization/porous.py +1120 -0
  129. morphogen/homogenization/postprocess.py +290 -0
  130. morphogen/homogenization/solvers.py +1140 -0
  131. morphogen/homogenization/tensors.py +240 -0
  132. morphogen/homogenization/voxel_fe.py +457 -0
  133. morphogen/homogenization/xfem.py +1016 -0
  134. morphogen/homogenization/zmat.py +1258 -0
  135. morphogen/iga/__init__.py +48 -0
  136. morphogen/iga/analysis.py +508 -0
  137. morphogen/iga/basis.py +214 -0
  138. morphogen/iga/geometry.py +501 -0
  139. morphogen/iga/homogenization.py +219 -0
  140. morphogen/iga/optimization.py +700 -0
  141. morphogen/iga/shapes.py +331 -0
  142. morphogen/image.py +128 -0
  143. morphogen/io/__init__.py +246 -0
  144. morphogen/io/amitex.py +741 -0
  145. morphogen/io/ebsd.py +881 -0
  146. morphogen/io/export.py +196 -0
  147. morphogen/io/geometry.py +158 -0
  148. morphogen/io/medit.py +147 -0
  149. morphogen/io/meshes.py +844 -0
  150. morphogen/io/metaimage.py +97 -0
  151. morphogen/io/mfront.py +1104 -0
  152. morphogen/io/native.py +57 -0
  153. morphogen/io/radioss.py +764 -0
  154. morphogen/io/solvers.py +371 -0
  155. morphogen/io/tables.py +278 -0
  156. morphogen/io/tiff.py +66 -0
  157. morphogen/io/vtk.py +701 -0
  158. morphogen/io/xdmf.py +200 -0
  159. morphogen/kernels/__init__.py +5 -0
  160. morphogen/kernels/annealing.py +192 -0
  161. morphogen/kernels/cells.py +69 -0
  162. morphogen/kernels/collective.py +87 -0
  163. morphogen/kernels/force_biased.py +595 -0
  164. morphogen/kernels/implicit.py +145 -0
  165. morphogen/kernels/leaves.py +132 -0
  166. morphogen/kernels/packing.py +304 -0
  167. morphogen/kernels/raster.py +279 -0
  168. morphogen/kernels/rsa.py +371 -0
  169. morphogen/kernels/union.py +135 -0
  170. morphogen/kernels/watershed.py +190 -0
  171. morphogen/laser/__init__.py +234 -0
  172. morphogen/laser/architectures.py +375 -0
  173. morphogen/laser/bending.py +216 -0
  174. morphogen/laser/cells.py +1694 -0
  175. morphogen/laser/design.py +940 -0
  176. morphogen/laser/figures.py +227 -0
  177. morphogen/laser/heat.py +804 -0
  178. morphogen/laser/materials.py +691 -0
  179. morphogen/laser/mechanics.py +1670 -0
  180. morphogen/laser/metallurgy.py +615 -0
  181. morphogen/laser/patterns.py +828 -0
  182. morphogen/laser/periodic.py +392 -0
  183. morphogen/laser/process.py +362 -0
  184. morphogen/laser/run.py +534 -0
  185. morphogen/laser/solid.py +216 -0
  186. morphogen/laser/specimen.py +200 -0
  187. morphogen/laser/structures.py +708 -0
  188. morphogen/learning/__init__.py +81 -0
  189. morphogen/learning/behaviour.py +398 -0
  190. morphogen/learning/data.py +328 -0
  191. morphogen/learning/learned.cpp +668 -0
  192. morphogen/learning/logarithmic.py +202 -0
  193. morphogen/learning/mfront.py +409 -0
  194. morphogen/learning/networks.py +767 -0
  195. morphogen/learning/run.py +212 -0
  196. morphogen/learning/standard.py +814 -0
  197. morphogen/learning/training.py +235 -0
  198. morphogen/mesh/__init__.py +29 -0
  199. morphogen/mesh/conforming.py +1423 -0
  200. morphogen/mesh/curved.py +600 -0
  201. morphogen/mesh/exact.py +1717 -0
  202. morphogen/mesh/octree.py +350 -0
  203. morphogen/mesh/polycrystal.py +1041 -0
  204. morphogen/mesh/polyhedra.py +677 -0
  205. morphogen/mesh/regularize.py +570 -0
  206. morphogen/mesh/surface.py +97 -0
  207. morphogen/mesh/tetra.py +512 -0
  208. morphogen/mesh/voxel.py +124 -0
  209. morphogen/micromorphic/__init__.py +31 -0
  210. morphogen/micromorphic/damage.py +359 -0
  211. morphogen/micromorphic/ductile.py +534 -0
  212. morphogen/micromorphic/finite.py +220 -0
  213. morphogen/micromorphic/microfoam.py +787 -0
  214. morphogen/micromorphic/space.py +341 -0
  215. morphogen/models/__init__.py +195 -0
  216. morphogen/models/affine.py +384 -0
  217. morphogen/models/automata.py +592 -0
  218. morphogen/models/base.py +500 -0
  219. morphogen/models/boolean.py +310 -0
  220. morphogen/models/bouligand.py +331 -0
  221. morphogen/models/branching.py +241 -0
  222. morphogen/models/combination.py +430 -0
  223. morphogen/models/deadleaves.py +766 -0
  224. morphogen/models/design.py +289 -0
  225. morphogen/models/ebsd.py +206 -0
  226. morphogen/models/fibers.py +1476 -0
  227. morphogen/models/foam.py +594 -0
  228. morphogen/models/gaussian.py +314 -0
  229. morphogen/models/growth.py +459 -0
  230. morphogen/models/hardcore.py +317 -0
  231. morphogen/models/hierarchical.py +269 -0
  232. morphogen/models/honeycomb.py +749 -0
  233. morphogen/models/implicit.py +177 -0
  234. morphogen/models/laminate.py +470 -0
  235. morphogen/models/lattice.py +351 -0
  236. morphogen/models/lattice_field.py +345 -0
  237. morphogen/models/levelset_foam.py +563 -0
  238. morphogen/models/nacre.py +411 -0
  239. morphogen/models/nested.py +924 -0
  240. morphogen/models/osteons.py +374 -0
  241. morphogen/models/pieces.py +167 -0
  242. morphogen/models/planar.py +126 -0
  243. morphogen/models/reconstruction.py +203 -0
  244. morphogen/models/scale_rich.py +1409 -0
  245. morphogen/models/scale_rich_3d.py +1616 -0
  246. morphogen/models/tessellation.py +735 -0
  247. morphogen/models/tiling_field.py +302 -0
  248. morphogen/models/tpms.py +197 -0
  249. morphogen/models/transparent.py +406 -0
  250. morphogen/models/union.py +141 -0
  251. morphogen/optimization/__init__.py +43 -0
  252. morphogen/optimization/cell.py +295 -0
  253. morphogen/optimization/filters.py +115 -0
  254. morphogen/optimization/mma.py +226 -0
  255. morphogen/optimization/run.py +219 -0
  256. morphogen/optimization/topology.py +632 -0
  257. morphogen/orientations.py +568 -0
  258. morphogen/parallel.py +599 -0
  259. morphogen/pipeline.py +978 -0
  260. morphogen/primitives.py +188 -0
  261. morphogen/results.py +564 -0
  262. morphogen/rve/__init__.py +73 -0
  263. morphogen/rve/report.py +627 -0
  264. morphogen/rve/scaling.py +363 -0
  265. morphogen/rve/study.py +1054 -0
  266. morphogen/rve/windows.py +345 -0
  267. morphogen/seeding.py +51 -0
  268. morphogen/settings.py +118 -0
  269. morphogen/stopping.py +48 -0
  270. morphogen/symmetry.py +384 -0
  271. morphogen/templates/activator_inhibitor.yaml +22 -0
  272. morphogen/templates/aggregation.yaml +23 -0
  273. morphogen/templates/boolean_cylinders.yaml +20 -0
  274. morphogen/templates/boolean_spheres.yaml +22 -0
  275. morphogen/templates/bouligand.yaml +28 -0
  276. morphogen/templates/cellular_automaton.yaml +25 -0
  277. morphogen/templates/coated_spheres.yaml +26 -0
  278. morphogen/templates/contact_fibers.yaml +27 -0
  279. morphogen/templates/cox_nanocomposite.yaml +22 -0
  280. morphogen/templates/cross_linked_fibers.yaml +26 -0
  281. morphogen/templates/curved_arcs.yaml +28 -0
  282. morphogen/templates/curved_fibers.yaml +24 -0
  283. morphogen/templates/dead_leaves.yaml +22 -0
  284. morphogen/templates/delaunay_network.yaml +22 -0
  285. morphogen/templates/dense_packing.yaml +22 -0
  286. morphogen/templates/diffusion.yaml +33 -0
  287. morphogen/templates/ebsd.yaml +34 -0
  288. morphogen/templates/ebsd_map.ctf +3087 -0
  289. morphogen/templates/fracture_composite.yaml +42 -0
  290. morphogen/templates/fracture_rubber.yaml +47 -0
  291. morphogen/templates/gaussian_excursion.yaml +17 -0
  292. morphogen/templates/graded_lattice.yaml +24 -0
  293. morphogen/templates/hardcore_fibers.yaml +22 -0
  294. morphogen/templates/hardcore_spheres.yaml +22 -0
  295. morphogen/templates/hierarchical_lattice.yaml +22 -0
  296. morphogen/templates/homogenization_acoustic_foam.yaml +36 -0
  297. morphogen/templates/homogenization_beremin.yaml +50 -0
  298. morphogen/templates/homogenization_cleavage.yaml +51 -0
  299. morphogen/templates/homogenization_cleavage_band.yaml +55 -0
  300. morphogen/templates/homogenization_contact.yaml +43 -0
  301. morphogen/templates/homogenization_crack_closure.yaml +49 -0
  302. morphogen/templates/homogenization_crystal_plasticity.yaml +50 -0
  303. morphogen/templates/homogenization_crystal_plasticity_fft.yaml +52 -0
  304. morphogen/templates/homogenization_crystallization.yaml +30 -0
  305. morphogen/templates/homogenization_debonding.yaml +43 -0
  306. morphogen/templates/homogenization_detwinning.yaml +58 -0
  307. morphogen/templates/homogenization_ductile_damage.yaml +47 -0
  308. morphogen/templates/homogenization_fatigue.yaml +40 -0
  309. morphogen/templates/homogenization_grain_fracture.yaml +56 -0
  310. morphogen/templates/homogenization_gyroid.yaml +30 -0
  311. morphogen/templates/homogenization_intergranular.yaml +43 -0
  312. morphogen/templates/homogenization_interphase.yaml +42 -0
  313. morphogen/templates/homogenization_mixed_loading.yaml +33 -0
  314. morphogen/templates/homogenization_ntfa.yaml +56 -0
  315. morphogen/templates/homogenization_piezoelectric.yaml +27 -0
  316. morphogen/templates/homogenization_polycrystal.yaml +30 -0
  317. morphogen/templates/homogenization_polycrystal_inclusions.yaml +30 -0
  318. morphogen/templates/homogenization_poroelastic.yaml +26 -0
  319. morphogen/templates/homogenization_rubber.yaml +40 -0
  320. morphogen/templates/homogenization_slip_cleavage.yaml +50 -0
  321. morphogen/templates/homogenization_spheres.yaml +31 -0
  322. morphogen/templates/homogenization_transport.yaml +29 -0
  323. morphogen/templates/homogenization_twinning.yaml +54 -0
  324. morphogen/templates/homogenization_viscoelastic.yaml +34 -0
  325. morphogen/templates/homogenization_viscoplastic.yaml +42 -0
  326. morphogen/templates/homogenization_voronoi.yaml +26 -0
  327. morphogen/templates/homogenization_xfem.yaml +23 -0
  328. morphogen/templates/hyperuniform_cells.yaml +24 -0
  329. morphogen/templates/laguerre.yaml +18 -0
  330. morphogen/templates/laser_bending.yaml +35 -0
  331. morphogen/templates/laser_cells.yaml +38 -0
  332. morphogen/templates/laser_corrugated.yaml +36 -0
  333. morphogen/templates/level_set_foam.yaml +29 -0
  334. morphogen/templates/menger_sponge.yaml +17 -0
  335. morphogen/templates/nacre.yaml +25 -0
  336. morphogen/templates/nucleation_growth.yaml +25 -0
  337. morphogen/templates/optimize_auxetic.yaml +29 -0
  338. morphogen/templates/optimize_auxetic_3d.yaml +27 -0
  339. morphogen/templates/optimize_bulk.yaml +23 -0
  340. morphogen/templates/optimize_conductivity.yaml +20 -0
  341. morphogen/templates/osteons.yaml +28 -0
  342. morphogen/templates/penetrable_spheres.yaml +21 -0
  343. morphogen/templates/poisson_fibers.yaml +21 -0
  344. morphogen/templates/random_laminate.yaml +26 -0
  345. morphogen/templates/random_lattice.yaml +27 -0
  346. morphogen/templates/random_walk_fibers.yaml +26 -0
  347. morphogen/templates/reaction_diffusion.yaml +22 -0
  348. morphogen/templates/reconstruction.yaml +22 -0
  349. morphogen/templates/rve_cellular_automaton.yaml +23 -0
  350. morphogen/templates/rve_crystal_plasticity_fft.yaml +51 -0
  351. morphogen/templates/rve_multiphysics.yaml +43 -0
  352. morphogen/templates/rve_poisson_fibers.yaml +22 -0
  353. morphogen/templates/rve_poisson_fibers_fe.yaml +33 -0
  354. morphogen/templates/rve_voronoi_windows.yaml +20 -0
  355. morphogen/templates/scale_rich_network.yaml +29 -0
  356. morphogen/templates/scale_rich_plates.yaml +30 -0
  357. morphogen/templates/sequential_dead_leaves.yaml +25 -0
  358. morphogen/templates/strut_lattice.yaml +21 -0
  359. morphogen/templates/tile_assembly.yaml +28 -0
  360. morphogen/templates/tpms.yaml +19 -0
  361. morphogen/templates/trabecular_bone.yaml +29 -0
  362. morphogen/templates/transparent_dead_leaves.yaml +23 -0
  363. morphogen/templates/vascular_tree.yaml +23 -0
  364. morphogen/templates/voronoi.yaml +20 -0
  365. morphogen/templates/wood.yaml +34 -0
  366. morphogen/templates/workflow.yaml +56 -0
  367. morphogen/texture.py +665 -0
  368. morphogen/theory.py +162 -0
  369. morphogen/viz/__init__.py +12 -0
  370. morphogen/viz/export.py +244 -0
  371. morphogen/viz/figures.py +707 -0
  372. morphogen/viz/png.py +148 -0
  373. morphogen/viz/sections.py +696 -0
  374. morphogen/viz/surfaces.py +1352 -0
  375. morphogen/viz/video.py +904 -0
  376. morphogen/viz/workflow.py +488 -0
  377. morphogen-1.0.0.dist-info/METADATA +2316 -0
  378. morphogen-1.0.0.dist-info/RECORD +381 -0
  379. morphogen-1.0.0.dist-info/WHEEL +4 -0
  380. morphogen-1.0.0.dist-info/entry_points.txt +5 -0
  381. morphogen-1.0.0.dist-info/licenses/LICENSE +674 -0
@@ -0,0 +1,58 @@
1
+ # The twins of a textured magnesium, there and back. The polycrystal of the template
2
+ # homogenization_twinning (the axes c of its grains near the axis 3), pulled by 4 % along
3
+ # 3 and brought back. The twins that the tension made shear back when the stress is
4
+ # reversed (detwinning), at about the stress of the tension: a crystal that kept its twins
5
+ # would have to slip on its hard pyramidal systems, at nearly twice that stress
6
+ # (twin_detwinning: false; a number: the share of their resistance at which they shear
7
+ # back). And the lattices of the points become those of their predominant twins
8
+ # (twin_reorientation), 86 degrees off those of their grains, grain by grain: the most
9
+ # twinned points first, so that the turned volume of a grain is its twinned volume. A
10
+ # turned point slips and twins as the twin does - its axis c lies across the tension, the
11
+ # polycrystal hardens - and twins back to the lattice of its grain when the load is
12
+ # reversed. The curve (magnesium_0000_cycle_periodic.csv) has the twinned fraction, the
13
+ # turned volume and the mean disorientation of the points at each step; the fields (.vti)
14
+ # those of each voxel. Half a minute.
15
+ model:
16
+ type: voronoi
17
+ n_cells: 12
18
+ crystal_orientations: true
19
+ texture: # of the axes c of the grains; the grains turned about them
20
+ type: von_mises_fisher
21
+ kappa: 30.0
22
+ axis: [0, 0, 1]
23
+ domain:
24
+ size: 1.0
25
+ periodic: true
26
+ seed: 5
27
+ voxels:
28
+ shape: 12
29
+ homogenization:
30
+ method: fft
31
+ materials:
32
+ 1:
33
+ hexagonal: [59400.0, 25600.0, 21400.0, 61600.0, 16400.0] # c11, c12, c13, c33, c44 (MPa)
34
+ crystal_plasticity:
35
+ c_over_a: 1.624
36
+ K: 5.0
37
+ n: 10.0
38
+ families: # critical resolved shear stresses (MPa)
39
+ basal: {tau0: 10.0}
40
+ prismatic: {tau0: 60.0}
41
+ pyramidal2_ca: {tau0: 100.0}
42
+ twins: # {10-12}<10-1-1>: a shear of 0.129
43
+ twin1012: {tau0: 25.0, Q: 15.0, b: 20.0}
44
+ twin_reorientation: # the lattices become those of the predominant twins (none
45
+ threshold: 0.2 # by default): grain by grain, past this twinned fraction
46
+ growth: 0.0 # (plus this times turned volume / twinned volume); a
47
+ # number alone: point by point, at that twinned fraction
48
+ twin_detwinning: true # the twins shear back when the stress is reversed (default)
49
+ properties: []
50
+ fields: true
51
+ paths:
52
+ cycle: # the other components: zero stress
53
+ times: [0, 1, 2]
54
+ increments: 16
55
+ strain: {"33": [0, 0.04, 0.0]}
56
+ outputs:
57
+ directory: out/homogenization_detwinning
58
+ name: magnesium
@@ -0,0 +1,47 @@
1
+ # The ductile damage of a particle-reinforced alloy: elastic SiC particles (20 %) in an
2
+ # aluminium matrix whose plasticity (isotropic and kinematic hardenings) is coupled to
3
+ # Lemaitre's damage, dD = (Y / S)^s dp beyond a plastic strain of 1 %: the stress of the
4
+ # matrix is (1 - D) times its effective stress, Y the energy release rate of the
5
+ # effective stress, which grows with the triaxiality between the particles. Pulled to
6
+ # 6 %, the composite reaches its strength near 3.6 % and softens as the matrix is
7
+ # damaged, then unloads along its damaged modulus. A local damage law that softens has
8
+ # no width of its own: the time of the delayed damage (viscosity) keeps the steps well
9
+ # posed. The variable p_0 of the curve (spheres_0000_tension_periodic.csv) is the mean
10
+ # damage of the matrix; about a minute and a half (FFT, 16 voxels per edge).
11
+ model:
12
+ type: hardcore_spheres
13
+ radius: 1.0
14
+ volume_fraction: 0.2
15
+ domain:
16
+ size: 5.0
17
+ periodic: true
18
+ seed: 7
19
+ voxels:
20
+ shape: 16
21
+ homogenization:
22
+ method: fft
23
+ materials:
24
+ 0: # aluminium alloy (MPa)
25
+ young: 70000
26
+ poisson: 0.33
27
+ plasticity:
28
+ yield: 100 # R0
29
+ isotropic: [{Q: 80, b: 20}] # R(p) = Q (1 - exp(-b p))
30
+ kinematic: [{C: 10000, D: 100}] # Armstrong-Frederick backstress
31
+ damage:
32
+ law: lemaitre # also kachanov (creep), with plasticity.norton
33
+ S: 0.35 # the strength of the damage (MPa)
34
+ s: 1.0
35
+ threshold: 0.01 # plastic strain at which the damage starts
36
+ closure: 0.2 # compressions count for a fifth in Y
37
+ viscosity: 0.05 # the time of the delayed damage
38
+ 1: {young: 400000, poisson: 0.2} # SiC particles, elastic
39
+ properties: []
40
+ paths:
41
+ tension: # free components: zero stress
42
+ times: [0, 1, 2]
43
+ increments: [30, 6]
44
+ strain: {"11": [0, 0.06, 0.054]}
45
+ outputs:
46
+ directory: out/homogenization_ductile_damage
47
+ name: spheres
@@ -0,0 +1,40 @@
1
+ # Pores in a cast alloy under a tension that alternates: where will fatigue start, and
2
+ # how far is the alloy from its limit? The cell stays elastic (high-cycle fatigue): the
3
+ # stresses of its points along one cycle are judged by Dang Van's criterion, calibrated
4
+ # on the fatigue limits of the alloy in alternating bending and torsion. A pore doubles
5
+ # the stress at its equator: there the utilization (the equivalent stress over the
6
+ # limit) is the largest, and its inverse is the factor by which the loading may grow
7
+ # before a point reaches its limit. The file pores_0000_cycle_periodic_fatigue.vtu maps
8
+ # the utilization, the amplitude of the shear and the largest pressure; the results
9
+ # have the largest utilization, the factor of safety and the share of the alloy beyond
10
+ # its limit. About a minute.
11
+ model:
12
+ type: hardcore_spheres # the pores (phase 1)
13
+ radius: 0.5
14
+ volume_fraction: 0.04
15
+ domain:
16
+ size: 4.0
17
+ periodic: true
18
+ seed: 5
19
+ mesh:
20
+ size: 0.35 # 10-node tetrahedra of the alloy alone, curved on the pores
21
+ homogenization:
22
+ method: fe
23
+ materials:
24
+ 0: {young: 72000.0, poisson: 0.33} # the alloy (MPa)
25
+ 1: void
26
+ properties: []
27
+ paths:
28
+ cycle: # a stress of 40 that alternates; free components: zero stress
29
+ times: [0, 1, 2, 3]
30
+ increments: [1, 2, 2]
31
+ stress: {"11": [0, 40, -40, 40]}
32
+ fatigue:
33
+ criterion: dang_van # crossland | sines | dang_van | findley | matake
34
+ bending: 110.0 # the fatigue limits of the alloy, alternating bending
35
+ torsion: 80.0 # and torsion (or the coefficients: alpha, beta)
36
+ cycle: [1, 3] # from the first peak on: the rise from zero is left out
37
+ outputs:
38
+ directory: out/homogenization_fatigue
39
+ name: pores
40
+ conforming_mesh: [vtu]
@@ -0,0 +1,56 @@
1
+ # Cracks between the grains and through them. A polycrystal meshed grain by grain: the
2
+ # boundaries of the grains are cohesive (a strength and a fracture energy), and each
3
+ # grain is a cubic crystal that slips ({110}<111>) and whose {100} planes cleave (the
4
+ # crack band: the fracture energy of the planes dissipated in one element). Which gives
5
+ # way depends on the two strengths: with boundaries weaker than the planes (here), the
6
+ # crack follows the boundaries and the grains stay whole (intergranular fracture: the
7
+ # work that breaks the cell is the fracture energy of the boundaries times the area of
8
+ # the crack); with strong boundaries (normal_strength: 3000) it cuts through the grains
9
+ # along their cleavage planes (transgranular fracture: no boundary debonds). The curve
10
+ # (grains_0000_tension_periodic.csv) has the debonded area of the boundaries and the
11
+ # damage of the cleavage planes at each step; the fields (.vtu) those of each element.
12
+ # Half a minute; a minute for the transgranular crack.
13
+ model:
14
+ type: voronoi
15
+ n_cells: 8
16
+ crystal_orientations: true
17
+ domain:
18
+ size: 1.0
19
+ periodic: true
20
+ seed: 2
21
+ mesh:
22
+ size: 0.2
23
+ order: 1 # 4-node tetrahedra, interface elements of three nodes a side
24
+ homogenization:
25
+ method: fe
26
+ materials:
27
+ 1:
28
+ cubic: [230000.0, 135000.0, 117000.0] # c11, c12, c44 (MPa)
29
+ crystal_plasticity:
30
+ K: 10.0
31
+ n: 10.0
32
+ families:
33
+ bcc110: {tau0: 300.0, Q: 100.0, b: 20.0}
34
+ cleavage:
35
+ planes: cube # {100}
36
+ strength: 500.0 # the normal stress that opens a plane (MPa)
37
+ energy: 1.0 # the fracture energy of the planes (N/mm)
38
+ length: 0.2 # the size of the elements that dissipate it
39
+ K: 20.0 # a viscosity of the opening (the crack crosses the cell at once)
40
+ n: 1.0
41
+ properties: []
42
+ fields: true
43
+ paths:
44
+ tension: # the other components: zero stress
45
+ times: [0, 1]
46
+ increments: 40
47
+ strain: {"33": [0, 0.012]}
48
+ nonlinear:
49
+ interfaces:
50
+ faces: grains # every boundary between two grains
51
+ normal_strength: 300.0 # MPa: weaker than the cleavage planes (3000: stronger)
52
+ mode_I: 0.5 # the fracture energy of the boundaries (N/mm)
53
+ outputs:
54
+ directory: out/homogenization_grain_fracture
55
+ name: grains
56
+ conforming_mesh: [vtu]
@@ -0,0 +1,30 @@
1
+ # Effective stiffness tensor (cubic symmetry) and conductivity of a sheet gyroid lattice
2
+ # of relative density 0.2, by periodic homogenization of one unit cell with finite
3
+ # elements on a conforming mesh of the solid (the void is not meshed). Thin sheets need
4
+ # 10-node tetrahedra or several elements across the thickness. Local fields (energy
5
+ # density, von Mises stress...) are written for ParaView.
6
+ model:
7
+ type: tpms
8
+ surface: gyroid
9
+ variant: sheet
10
+ cell_size: 1.0
11
+ volume_fraction: 0.2
12
+ domain:
13
+ size: 1.0
14
+ periodic: true
15
+ mesh:
16
+ size: 0.08
17
+ order: 2
18
+ background: 0.025 # method: grid only (the default meshes the exact sheet):
19
+ # level-set sampling, about 3 points across the sheet
20
+ homogenization:
21
+ materials:
22
+ 0: void
23
+ 1: {young: 110000.0, poisson: 0.34, conductivity: 7.0} # Ti-6Al-4V
24
+ boundary_conditions: [periodic]
25
+ properties: [stiffness, bulk_modulus, shear_modulus, conductivity]
26
+ fields: true
27
+ outputs:
28
+ directory: out/homogenization_gyroid
29
+ name: gyroid
30
+ conforming_mesh: [vtu]
@@ -0,0 +1,43 @@
1
+ # A polycrystal that breaks along its grain boundaries. The boundaries of the grains of a
2
+ # periodic Voronoi tessellation are cohesive (a strength and a fracture energy); each
3
+ # grain is a cubic crystal with its orientation, elastic. Pulled, the polycrystal is
4
+ # first as stiff as with perfect boundaries; the boundaries most loaded are damaged, the
5
+ # stress passes a peak above the strength of the boundaries (they are not across the
6
+ # load) and falls to zero as a crack crosses the cell from boundary to boundary. The
7
+ # crack is not flat: its area is 1.2 times the section of the cell, and the work that
8
+ # broke the cell is the fracture energy times that area. The curve
9
+ # (grains_0000_tension_periodic.csv) has at each step the debonded area, the mean damage
10
+ # and the largest opening of the boundaries; the fields (.vtu, with fields: true) the
11
+ # damage and the opening of the boundaries of each element. Some ten seconds.
12
+ model:
13
+ type: voronoi
14
+ n_cells: 8
15
+ crystal_orientations: true
16
+ domain:
17
+ size: 1.0
18
+ periodic: true
19
+ seed: 2
20
+ mesh:
21
+ size: 0.2
22
+ order: 1 # 4-node tetrahedra, interface elements of three nodes a side
23
+ homogenization:
24
+ method: fe
25
+ materials:
26
+ 1: {cubic: [250000.0, 160000.0, 120000.0]} # a nickel alloy (MPa)
27
+ properties: []
28
+ fields: true
29
+ paths:
30
+ tension: # free components: zero stress
31
+ times: [0, 1]
32
+ increments: 50
33
+ strain: {"11": [0, 0.005]}
34
+ nonlinear:
35
+ interfaces:
36
+ faces: grains # every boundary between two grains
37
+ normal_strength: 300.0 # MPa
38
+ mode_I: 0.5 # the fracture energy (N/mm): tough enough for the boundaries
39
+ # to soften without a snap-back (no viscosity needed)
40
+ outputs:
41
+ directory: out/homogenization_intergranular
42
+ name: grains
43
+ conforming_mesh: [vtu]
@@ -0,0 +1,42 @@
1
+ # Three phases meshed conformingly: spheres, their interphase of constant thickness and
2
+ # the matrix. Each phase has its implicit function, exact on the interfaces of the model
3
+ # (distances to the spheres); the mesher (MMG) cuts the box by them one after the other,
4
+ # so that the elements follow the two interfaces of each particle and match on opposite
5
+ # faces; the coatings that overlap are cut group by group, and the grooves where two of
6
+ # them meet are edges of the mesh. Finite elements under periodic conditions for the
7
+ # stiffness and the conductivity; compare with the voxels of the template coated_spheres
8
+ # (method: fft).
9
+ # The files: the mesh (coated_0000_tet.vtu), the implicit function of each phase on the
10
+ # voxels (coated_0000_levelset_phase<k>.vti) and the surface of each phase but the last
11
+ # (coated_0000_phase<k>.stl). The elements have ten nodes (the default of an analysis),
12
+ # those of the two interfaces of each particle on their spheres: curved edges, which keep
13
+ # the volumes of the spheres and of their interphase within a percent with elements twice
14
+ # as large as the interphase is thick. About two minutes.
15
+ model:
16
+ type: coating
17
+ model: {type: hardcore_spheres, radius: 1.0, volume_fraction: 0.2}
18
+ thickness: 0.3
19
+ side: outside
20
+ domain:
21
+ size: 5.0
22
+ periodic: true
23
+ seed: 2
24
+ mesh:
25
+ size: 0.7 # largest edge of the elements
26
+ voxels:
27
+ shape: 64 # of the implicit functions and of the surfaces
28
+ homogenization:
29
+ method: fe
30
+ materials:
31
+ 0: {young: 3.0, poisson: 0.35, conductivity: 0.2} # matrix
32
+ 1: {young: 70.0, poisson: 0.22, conductivity: 1.0} # spheres
33
+ 2: {young: 10.0, poisson: 0.3, conductivity: 0.5} # interphase
34
+ boundary_conditions: [periodic]
35
+ properties: [stiffness, conductivity]
36
+ outputs:
37
+ directory: out/homogenization_interphase
38
+ name: coated
39
+ conforming_mesh: [vtu]
40
+ level_set: [vti]
41
+ surface: [stl]
42
+ analysis: [phase_fractions]
@@ -0,0 +1,33 @@
1
+ # Thermo-elastic homogenization of a unidirectional glass-epoxy composite with the
2
+ # macroscopic strain and stress of the periodic cell as unknowns, as the periodic
3
+ # element of Z-set: named loadings mix prescribed strain and stress components, and a
4
+ # temperature change. A Bouligand structure with no twist is a unidirectional
5
+ # composite: one fibre of radius 2 (12.6 %) along z per 10 x 10 cell.
6
+ model:
7
+ type: bouligand
8
+ fiber_radius: 2.0
9
+ fiber_spacing: 10.0
10
+ layer_thickness: 10.0
11
+ pitch_angle: 0.0
12
+ start_angle: 90.0 # along z in the (y, z) plane of the layers
13
+ axis: 0
14
+ domain:
15
+ size: [10.0, 10.0, 0.3125] # prismatic along the fibre: 4 voxels
16
+ periodic: true
17
+ voxels:
18
+ shape: [128, 128, 4]
19
+ homogenization:
20
+ method: fft
21
+ materials:
22
+ 0: {young: 2800.0, poisson: 0.39, expansion: 9.5e-5} # epoxy (MPa, 1/K)
23
+ 1: {young: 89000.0, poisson: 0.3, expansion: 5.5e-6} # glass fibre
24
+ properties: [stiffness, thermal_expansion]
25
+ loadings:
26
+ free_heating: {temperature: 100.0} # stress-free: the expansion
27
+ blocked_heating: {strain: {"11": 0, "22": 0, "33": 0, "23": 0, "31": 0, "12": 0},
28
+ temperature: 100.0} # the thermal stresses
29
+ tension_33: {stress: {"33": 100.0}} # uniaxial stress along the fibre
30
+ plane_strain_11: {strain: {"11": 0.001, "33": 0.0}} # mixed: the rest stress-free
31
+ outputs:
32
+ directory: out/homogenization_mixed_loading
33
+ name: unidirectional
@@ -0,0 +1,56 @@
1
+ # Reduced model of an elasto-plastic composite by the nonuniform transformation field
2
+ # analysis (NTFA, Michel & Suquet 2003): SiC spheres in an aluminium alloy, voxelized.
3
+ # The model is trained once on full-field paths (here tension and shear), whose plastic
4
+ # strain fields give six modes of the matrix; the paths are then followed by the reduced
5
+ # model in milliseconds (results <name>.ntfa), and also by the full field here
6
+ # (full_field: true) to compare them (<name>.periodic). The training paths must span
7
+ # the loading directions of the paths followed. Isotropic and kinematic (Armstrong-
8
+ # Frederick) hardening; norton: {K, n} for viscoplasticity.
9
+ model:
10
+ type: hardcore_spheres
11
+ radius: 1.0
12
+ volume_fraction: 0.2
13
+ domain:
14
+ size: 5.0
15
+ periodic: true
16
+ seed: 7
17
+ voxels:
18
+ shape: 24
19
+ homogenization:
20
+ method: fft
21
+ materials:
22
+ 0: # aluminium alloy (MPa)
23
+ young: 70000
24
+ poisson: 0.33
25
+ plasticity:
26
+ yield: 100 # R0
27
+ hardening: 1000 # R(p) = H p + Q (1 - exp(-b p))
28
+ isotropic: [{Q: 30, b: 50}]
29
+ kinematic: [{C: 10000, D: 100}] # Armstrong-Frederick backstress
30
+ 1: {young: 400000, poisson: 0.2} # SiC particles, elastic
31
+ boundary_conditions: [periodic]
32
+ paths:
33
+ tension:
34
+ times: [0, 1]
35
+ increments: [10]
36
+ strain: {"11": [0, 0.01]}
37
+ cycle:
38
+ times: [0, 1, 2]
39
+ increments: [10, 10]
40
+ strain: {"11": [0, 0.01, -0.006]}
41
+ ntfa:
42
+ training: # full-field paths whose snapshots give the modes
43
+ tension:
44
+ times: [0, 1]
45
+ increments: [10]
46
+ strain: {"11": [0, 0.01]}
47
+ shear:
48
+ times: [0, 1]
49
+ increments: [10]
50
+ strain: {"12": [0, 0.02]}
51
+ modes: 6 # per plastic phase
52
+ save: ntfa_model.npz # the reduced model, for later runs
53
+ full_field: true # also the full-field paths, to compare
54
+ outputs:
55
+ directory: out/homogenization_ntfa
56
+ name: composite
@@ -0,0 +1,27 @@
1
+ # A piezoelectric composite: barium titanate particles poled along x3 in a polymer (SI
2
+ # units). The displacement and the electric potential are solved together on the voxels
3
+ # (a strong coupling: MINRES preconditioned in Fourier space); the results are the
4
+ # tensors of the effective law (stiffness, piezoelectric matrix e, permittivity) and its
5
+ # constants: d33, g33, the hydrostatic coefficients d_h and g_h, the coupling factors.
6
+ model:
7
+ type: boolean_spheres
8
+ radius: 1.0
9
+ volume_fraction: 0.3
10
+ domain:
11
+ size: 6.0
12
+ periodic: true
13
+ seed: 11
14
+ voxels:
15
+ shape: 16
16
+ homogenization:
17
+ method: fft
18
+ materials:
19
+ 0: {young: 4.0e+9, poisson: 0.35, permittivity: 3.7e-11} # polymer
20
+ 1: # BaTiO3 (Li & Dunn 1998)
21
+ hexagonal: [166.0e+9, 77.0e+9, 78.0e+9, 162.0e+9, 43.0e+9]
22
+ permittivity: [11.2e-9, 11.2e-9, 12.6e-9]
23
+ coupling: {piezoelectric: {e31: -4.4, e33: 18.6, e15: 11.6}} # C/m^2
24
+ properties: [piezoelectric]
25
+ outputs:
26
+ directory: out/homogenization_piezoelectric
27
+ name: composite
@@ -0,0 +1,30 @@
1
+ # Apparent elastic moduli of a copper polycrystal: a periodic Voronoi tessellation whose
2
+ # grains are cubic crystals with uniformly random orientations, meshed grain by grain
3
+ # (exact cells, conforming grain boundaries, matching periodic faces) and solved by
4
+ # finite elements. The bulk modulus is exactly (C11 + 2 C12) / 3 for every boundary
5
+ # condition; the shear moduli satisfy Reuss <= SUBC <= PBC <= KUBC <= Voigt. With 50
6
+ # grains, each shear component (C44, C55, C66) depends on the texture of the sample (a
7
+ # few GPa); the isotropic projection of the stiffness tensor (column
8
+ # stiffness.periodic.shear_modulus) lies close to the Hashin-Shtrikman bounds (45.96 -
9
+ # 49.45 GPa).
10
+ model:
11
+ type: voronoi
12
+ n_cells: 50
13
+ crystal_orientations: true
14
+ domain:
15
+ size: 1.0
16
+ periodic: true
17
+ seed: 1962
18
+ realizations: 2
19
+ mesh:
20
+ size: 0.12 # largest element size (10-node elements, the default)
21
+ min_feature: 0.02 # cell edges and caps smaller than this are removed first
22
+ homogenization:
23
+ materials:
24
+ 1: {cubic: [168.4, 121.4, 75.4], conductivity: 400.0} # copper, GPa and W/m/K
25
+ boundary_conditions: [kubc, periodic, subc]
26
+ properties: [bulk_modulus, shear_modulus, stiffness]
27
+ outputs:
28
+ directory: out/homogenization_polycrystal
29
+ name: copper
30
+ conforming_mesh: [vtu, inp] # grains: cell data / element sets and orientations
@@ -0,0 +1,30 @@
1
+ # Copper polycrystal with an amorphous grain-boundary phase and alumina inclusions,
2
+ # homogenized by FFT: the grains (phase 1) are cubic crystals turned by their random
3
+ # orientations, the boundaries (phase 0, 0.01 thick) and the inclusions (phase 2) are
4
+ # isotropic. The combination keeps the grains of the polycrystal under the inclusions.
5
+ model:
6
+ type: combination
7
+ operation: inclusions
8
+ models:
9
+ - {type: voronoi, n_cells: 50, crystal_orientations: true, boundary_thickness: 0.01}
10
+ - {type: hardcore_spheres, radius: 0.05, volume_fraction: 0.05}
11
+ inclusion_phases: [2]
12
+ domain:
13
+ size: 1.0
14
+ periodic: true
15
+ seed: 11
16
+ voxels:
17
+ shape: 64
18
+ homogenization:
19
+ method: fft
20
+ materials:
21
+ 0: {young: 60.0, poisson: 0.35} # grain boundaries (GPa)
22
+ 1: {cubic: [168.4, 121.4, 75.4]} # copper crystals
23
+ 2: {young: 380.0, poisson: 0.22} # alumina
24
+ properties: [bulk_modulus, shear_modulus]
25
+ outputs:
26
+ directory: out/homogenization_polycrystal_inclusions
27
+ name: composite
28
+ image: [vti]
29
+ labels: [vti]
30
+ analysis: [phase_fractions]
@@ -0,0 +1,26 @@
1
+ # The poroelastic law of a porous solid (Biot): its drained stiffness, the tensor and the
2
+ # modulus of Biot (Sigma = C_d : E - b p; change of porosity b : E + p / N) and, with
3
+ # water in the pores, the undrained stiffness and the coefficient of Skempton (Gassmann).
4
+ # The pressure of the pores is one more loading of the elastic solver: the eigenstrain
5
+ # -p S_s : 1 of the solid.
6
+ model:
7
+ type: boolean_spheres # the pores: overlapping spheres, connected above 29 %
8
+ radius: 1.0
9
+ volume_fraction: 0.2
10
+ domain:
11
+ size: 6.0
12
+ periodic: true
13
+ seed: 3
14
+ realizations: 2
15
+ voxels:
16
+ shape: 24
17
+ homogenization:
18
+ method: fft
19
+ materials:
20
+ 0: {young: 60.0e+9, poisson: 0.15} # quartz-like solid
21
+ 1: void
22
+ properties: [stiffness, poroelastic]
23
+ fluid_bulk_modulus: 2.2e+9 # water
24
+ outputs:
25
+ directory: out/homogenization_poroelastic
26
+ name: rock
@@ -0,0 +1,40 @@
1
+ # A filled rubber in finite strains: stiff particles (15 %) in a rubber whose chains lock
2
+ # (the eight chains of Arruda and Boyce) and which softens along its first loading (the
3
+ # effect of Mullins, after Ogden and Roxburgh). Stretched by 50 %, unloaded, then
4
+ # stretched by 60 %, the sides free: the second loading follows a softer curve up to the
5
+ # stretch already reached, then the first one again. The particles are elastic (the
6
+ # energy of Hencky in finite strains). Nominal strains and stresses, with the true ones
7
+ # (LE11, TS11) in rubber_0000_cycle_periodic.csv; about two minutes.
8
+ model:
9
+ type: hardcore_spheres
10
+ radius: 1.0
11
+ volume_fraction: 0.15
12
+ domain:
13
+ size: 5.0
14
+ periodic: true
15
+ seed: 3
16
+ voxels:
17
+ shape: 16
18
+ homogenization:
19
+ method: fft
20
+ materials:
21
+ 0: # the rubber (MPa)
22
+ young: 3.0
23
+ poisson: 0.45
24
+ hyperelasticity:
25
+ model: eight_chain # also neo_hookean, mooney_rivlin, yeoh, gent, ogden...
26
+ lock: 3.0 # the locking stretch of the chains
27
+ mullins: [1.5, 0.3, 0.1] # r, m, beta of the softening
28
+ 1: {young: 300.0, poisson: 0.3} # the particles
29
+ properties: []
30
+ paths:
31
+ cycle: # free components: zero stress
32
+ times: [0, 1, 2, 3]
33
+ increments: [8, 6, 10]
34
+ strain: {"11": [0, 0.5, 0.05, 0.6]} # nominal: the stretch minus one
35
+ nonlinear:
36
+ kinematics: finite # total Lagrangian, F-bar voxels
37
+ fields: true
38
+ outputs:
39
+ directory: out/homogenization_rubber
40
+ name: rubber
@@ -0,0 +1,50 @@
1
+ # Cleavage that the slip nucleates. A polycrystal of iron on voxels whose grains slip on
2
+ # their {110}<111> systems well below the strength of their {100} cleavage planes: with
3
+ # a constant strength it would yield, harden and never cleave until the stress of a
4
+ # grain came to that strength - slip shields cleavage. Here the slip of a crystal lowers
5
+ # the strength of its planes, as exp(-coupling x cumulated slip) (the coupling of
6
+ # plasticity and damage of Aslan et al. 2011), and their damage eases its slip in return:
7
+ # the polycrystal yields at some 430 MPa, hardens, and breaks across a section once its
8
+ # grains have slipped enough: at 594 MPa and 1.6 %, for 682 MPa and 2.4 % without the
9
+ # coupling (coupling: 0), where it breaks when the stress of a grain comes to the
10
+ # strength of its planes. The curve (iron_0000_tension_periodic.csv) has the plastic
11
+ # strain, the opening and the damage of the planes; the fields (.vti) those of each
12
+ # voxel. A minute.
13
+ model:
14
+ type: voronoi
15
+ n_cells: 8
16
+ crystal_orientations: true
17
+ domain:
18
+ size: 0.1 # mm: grains of some 50 micrometres
19
+ periodic: true
20
+ seed: 2
21
+ voxels:
22
+ shape: 10
23
+ homogenization:
24
+ method: fft
25
+ materials:
26
+ 1:
27
+ cubic: [230000.0, 135000.0, 117000.0] # C11, C12, C44 of iron (MPa)
28
+ crystal_plasticity:
29
+ K: 10.0
30
+ n: 10.0
31
+ families:
32
+ bcc110: {tau0: 150.0, Q: 100.0, b: 20.0} # a slip far below the cleavage
33
+ cleavage:
34
+ planes: cube # {100}
35
+ strength: 800.0 # the normal stress that opens a plane that has not slipped (MPa)
36
+ coupling: 5.0 # the strength falls as exp(-coupling x cumulated slip)
37
+ energy: 0.08 # the fracture energy of the planes (N/mm)
38
+ length: 0.01 # the size of the voxels that dissipate it (size / shape)
39
+ K: 50.0 # a viscosity of the opening: the crack crosses the cell at
40
+ n: 1.0 # once (a snap-back), the steps pass with it
41
+ properties: []
42
+ fields: true
43
+ paths:
44
+ tension: # the other components: zero stress
45
+ times: [0, 1]
46
+ increments: 40
47
+ strain: {"33": [0, 0.04]}
48
+ outputs:
49
+ directory: out/homogenization_slip_cleavage
50
+ name: iron
@@ -0,0 +1,31 @@
1
+ # Apparent elastic moduli of a Boolean model of stiff spheres in a soft matrix under the
2
+ # four boundary conditions, by finite elements on conforming tetrahedral meshes (MMG).
3
+ # The apparent bulk moduli satisfy Reuss <= SUBC <= PBC <= KUBC <= Voigt, and MBC lies
4
+ # between SUBC and KUBC (Kanit et al. 2003; Dirrenberger et al. 2014). The elements have
5
+ # ten nodes, those of the interfaces on the spheres (curved edges), and the mesh follows
6
+ # the grooves where two spheres overlap (its sharp edges); the grid of the mesher is
7
+ # fine enough for the necks and the gaps between the spheres. About six minutes for the
8
+ # two realizations (110,000 nodes each).
9
+ model:
10
+ type: boolean_spheres
11
+ radius: 1.0
12
+ volume_fraction: 0.3
13
+ domain:
14
+ size: 6.0
15
+ periodic: true
16
+ seed: 2003
17
+ realizations: 2
18
+ mesh:
19
+ size: 1.0 # largest element size (the interface is refined)
20
+ background: 0.25 # the grid on which the mesher samples the spheres
21
+ order: 2 # 10-node tetrahedra (the default of an analysis); 1: 4-node
22
+ homogenization:
23
+ materials:
24
+ 0: {young: 1.0, poisson: 0.3} # matrix
25
+ 1: {young: 20.0, poisson: 0.3} # spheres
26
+ boundary_conditions: [kubc, periodic, mixed, subc]
27
+ properties: [bulk_modulus, shear_modulus]
28
+ outputs:
29
+ directory: out/homogenization_spheres
30
+ name: spheres
31
+ conforming_mesh: [vtu]