mindspore 2.4.0__cp310-cp310-macosx_10_15_x86_64.whl

mindspore/profiler/parser/flops_parser.py

@@ -0,0 +1,531 @@
+# Copyright 2021 Huawei Technologies Co., Ltd
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============================================================================
+"""Flops parser which parsing flops from aicore file."""
+import os
+import struct
+import json
+import stat
+
+from mindspore import log as logger
+from mindspore.profiler.common.exceptions.exceptions import ProfilerIOException, \
+    ProfilerFileNotFoundException, ProfilerRawFileException, ProfilerPathErrorException
+from mindspore.profiler.common.validator.validate_path import \
+    validate_and_normalize_path
+
+
+class FlopsParser:
+    """
+    The parser for parsing flops from aicore file.
+
+    Args:
+        input_dir (str): Directory(JOBXXX) where the original profiling data are located.
+        output_dir (str): Directory(profiler-{timestamp}) where the parsed profiling files are located.
+        op_task_dict (dict): The mapping relation of task_id and op_full_name.
+        device_id (str): The device ID.
+    """
+    HEX = 16
+    PMU_COUNT = 8
+    AICORE_LOG_SIZE = 128  # the size of each struct is 128 Byte.
+    RUNTIME_COMMON = "BBHHHII10Q8I"
+
+    # If the task id is less than the task id threshold,
+    # the combination of task id and Stream id represents one operator,
+    # else the task id represents one operator.
+    _task_id_threshold = 65536
+
+    def __init__(self, input_dir, output_dir, op_task_dict, device_id, rank_id, is_training_mode_flag=True):
+        self._input_dir = input_dir
+        self._output_dir = output_dir
+        self._op_task_dict = op_task_dict
+        self._device_id = device_id
+        self._rank_id = rank_id
+        self.is_training_mode_flag = is_training_mode_flag
+        # output files.
+        self._flops_filename = f'flops_{self._rank_id}.txt'
+        self._flops_summary_filename = f'flops_summary_{self._rank_id}.json'
+        self._flops_scope_filename = f'flops_scope_{self._rank_id}.json'
+        self._flops_utilization_step_filename = f'flops_utilization_step_{self._rank_id}.json'
+        # input files.
+        self._aicore_filename_pref = f'aicore.data.{self._device_id}.slice'
+        self._optime_filename = f'output_op_compute_time_{self._rank_id}.txt'
+        self._info_json = f'info.json.{self._device_id}'
+        self._step_trace_filename = f'step_trace_raw_{self._rank_id}_detail_time.csv'
+        self._timeline_data_filename = f'output_timeline_data_{self._rank_id}.txt'
+        self._flops_summary = {
+            'FLOPs': 0,
+            'FLOPS': 0,
+            'FLOPS_Utilization': 0
+        }
+        self._flops_each_scope = {}
+        self._flops_sankey_diagram = {}
+        self._max_scope_num = 0
+
+    @staticmethod
+    def _read_line(start_dot, end_dot, op_avg_time_lines, op_all_step_time, op_all_step_comp):
+        """Read the bp and fp time from line."""
+        for op_avg_idx in op_avg_time_lines:
+            line = op_avg_idx.split(',')
+            fp = float(line[start_dot]) / 100000.0
+            bp = float(line[end_dot]) / 100000.0
+            op_all_step_time.append([fp, bp])
+            op_all_step_comp.append([0.0, bp - fp])
+        return op_all_step_time, op_all_step_comp
+
+    @staticmethod
+    def _add_step_flops_time(op_name, task_fops, op_idx, step_idx, op_start_time,
+                             op_all_step_time, op_all_step_comp):
+        """Get the start time from the current task."""
+        while((op_idx < len(op_start_time)) and (op_name != op_start_time[op_idx][0])):
+            op_idx += 1
+        if op_idx >= len(op_start_time):
+            logger.debug(f"Op name {op_name} does not exist in timeline dict.")
+            return op_idx, step_idx, op_all_step_comp
+
+        # do not add the op FLOPS that not in fp_and_bp time.
+        while((step_idx < len(op_all_step_time)) and
+              (op_start_time[op_idx][1] >= op_all_step_time[step_idx][1])):
+            step_idx += 1
+        if step_idx >= len(op_all_step_time):
+            logger.info(f"Op name {op_name} does not exist in timeline dict.")
+
+        # add the op FLOPS that in fp_and_bp time.
+        if ((step_idx < len(op_all_step_time)) and
+                (op_start_time[op_idx][1] >= op_all_step_time[step_idx][0]) and
+                (op_start_time[op_idx][1] <= op_all_step_time[step_idx][1])):
+            op_all_step_comp[step_idx][0] += task_fops
+        # next op.
+        op_idx += 1
+        return op_idx, step_idx, op_all_step_comp
+
+    def execute(self):
+        """Get the flops of aicore operators and write to file."""
+        peak_flops = self._get_peak_flops()
+
+        op_avg_time_dict = self._get_op_avg_time_dict()
+        op_flops_list = []
+        op_name_set = set()
+        op_compute_dict = dict()
+        # get all step time.
+        op_all_step_time, op_all_step_comp = self._get_all_step_time()
+        op_start_time = self._get_op_start_time()
+        op_idx = 0
+        step_idx = 0
+        aicore_file_doc = os.path.join(self._input_dir, "data")
+        source_files = self._get_aicore_files(aicore_file_doc)
+        if not source_files:
+            return
+        # parse all sliced aicore files.
+        for source_file in source_files:
+            source_file = validate_and_normalize_path(source_file)
+            read_count, all_log_struct = self._load_aicore_data(source_file)
+
+            for idx in range(read_count):
+                log_struct = all_log_struct[idx * self.AICORE_LOG_SIZE:
+                                            (idx + 1) * self.AICORE_LOG_SIZE]
+                result = [hex(i) for i in struct.unpack(self.RUNTIME_COMMON, log_struct)]
+                op_name = self._get_op_name(result)
+
+                if op_name == "":
+                    # filter out the blank line in the file.
+                    continue
+                if op_name not in op_avg_time_dict:
+                    logger.info(f"Op name {op_name} does not exist in op average time dict.")
+                    continue
+                # Convert the unit of task_fops to MFLOPs(1e6).
+                if op_name in op_compute_dict:
+                    task_fops = op_compute_dict.get(op_name)
+                else:
+                    task_fops = self._compute_task_flops(result) * 1e-6
+                    op_compute_dict[op_name] = task_fops
+
+                # add the op FLOPS in current step.
+                if len(op_start_time) >= 1 and len(op_all_step_time) >= 1:
+                    op_idx, step_idx, op_all_step_comp = self._add_step_flops_time(
+                        op_name, task_fops, op_idx, step_idx, op_start_time, op_all_step_time, op_all_step_comp)
+
+                # calculate averge op FLOPS.
+                if op_name in op_name_set:
+                    continue
+                op_avg_time = op_avg_time_dict.get(op_name)
+                # Time unit of op_avg_time is ms.
+                # The unit of gflop_per_second is GFLOPS(1e9).
+                if float(op_avg_time) == 0.0:
+                    raise ValueError("All operators take 0 ms.")
+                if peak_flops == 0:
+                    raise ValueError("The frequency of an operator is 0.")
+                gflop_per_second = task_fops / float(op_avg_time)
+                flops_utilization = (gflop_per_second * 1e9 / peak_flops) * 100
+                self._flops_summary['FLOPs'] += task_fops
+                self._flops_summary['FLOPS'] += gflop_per_second
+                op_flops = [op_name, str(task_fops), str(gflop_per_second), str(flops_utilization)]
+                op_flops_list.append(op_flops)
+                op_name_set.add(op_name)
+                self._add_flops_to_each_scope(op_name, task_fops)
+
+        if not op_name_set:
+            raise ProfilerRawFileException("No aicore operator found.")
+        self._flops_summary['FLOPS'] /= len(op_name_set)
+
+        sum_flops_utilization = 0.0
+        # calculate the every step FLOPS utilization and the average values.
+        utilization_save_filename = os.path.join(self._output_dir, self._flops_utilization_step_filename)
+        with os.fdopen(os.open(utilization_save_filename, os.O_WRONLY | os.O_CREAT | os.O_TRUNC, 0o600), 'w') as f:
+            f.write("steps, FLOPS_Utilization %\n")
+            for i, x in enumerate(op_all_step_comp):
+                current_utilization = x[0] / x[1] * 1e9 / peak_flops * 100
+                sum_flops_utilization += current_utilization
+                f.write(str(i + 1))
+                f.write(",")
+                f.write(str(current_utilization))
+                f.write("\n")
+        os.chmod(utilization_save_filename, stat.S_IREAD | stat.S_IWRITE)
+
+        if len(op_all_step_comp) >= 1:
+            self._flops_summary['FLOPS_Utilization'] = sum_flops_utilization / len(op_all_step_comp)
+        else:
+            logger.warning("The number of data calculation steps is 0, please check whether the "
+                           "output timeline data is none.")
+            self._flops_summary['FLOPS_Utilization'] = 0.0
+        self._format_scope_flops()
+        self._write_file(op_flops_list)
+
+    def _load_aicore_data(self, aicore_file_path):
+        """Load the original binary aicore data."""
+        logger.info("the aicore file path is %s", aicore_file_path)
+
+        if not os.path.exists(aicore_file_path):
+            logger.critical(f'The file {aicore_file_path} does not exist.')
+            raise ProfilerFileNotFoundException('aicore.data')
+
+        file_size = os.path.getsize(aicore_file_path)
+        read_count = file_size // self.AICORE_LOG_SIZE
+
+        if not read_count:
+            logger.critical(f'the file {aicore_file_path} '
+                            f'does not have enough content to be parsed.')
+            raise ProfilerRawFileException(
+                'aicore.data file does not have enough content to be parsed'
+            )
+        aicore_file_path = os.path.realpath(aicore_file_path)
+        try:
+            with open(aicore_file_path, "rb") as aicore_file:
+                all_log_struct = aicore_file.read(self.AICORE_LOG_SIZE * read_count)
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when read {aicore_file_path} file: {err}')
+            raise ProfilerIOException() from err
+
+        return read_count, all_log_struct
+
+    def _get_peak_flops(self):
+        """Get the peak FLOPS of current ascend device."""
+        info_json_file_path = os.path.join(
+            self._input_dir,
+            self._info_json
+        )
+
+        if not os.path.exists(info_json_file_path):
+            logger.critical(f'The file {info_json_file_path} does not exist.')
+            raise ProfilerFileNotFoundException(info_json_file_path)
+
+        try:
+            with open(info_json_file_path, 'r', encoding='utf-8') as info_file:
+                device_info = json.load(info_file)['DeviceInfo'][0]
+                device_frequency = float(device_info["aic_frequency"])
+                ai_core_num = float(device_info["ai_core_num"])
+                # peak_flops formula (provided by Hisi): device_frequency * num_of_aicore * 4096 * 2.
+                peak_flops = device_frequency * 1e6 * ai_core_num * 4096 * 2
+        except (IOError, OSError, json.JSONDecodeError) as err:
+            logger.critical(f'Error occurred when read {info_json_file_path} file: {err}')
+            raise ProfilerIOException() from err
+
+        return peak_flops
+
+    def _compute_task_flops(self, log_result):
+        """Compute the FLOPs of each task."""
+        pmu_cnt = list(
+            int(i.replace('0x', ''), self.HEX)
+            for i in log_result[9:17]
+        )
+        cube_fp16_exec = pmu_cnt[0]
+        cube_int8_exec = pmu_cnt[1]
+        vec_fp32 = pmu_cnt[2]
+        vec_fp16_128lane_exec = pmu_cnt[3]
+        vec_fp16_64lane_exec = pmu_cnt[4]
+        vec_int32_exec = pmu_cnt[5]
+        vec_misc_exec = pmu_cnt[6]
+
+        # These formula is provided by HISI profiling.
+        # a cube_fp16 instruction has (16**3)*2 float point operation.
+        # a cube_fp16 instruction has 16*16*32*2 float point operation.
+        cube_fops = cube_fp16_exec * (16 ** 3) * 2 + cube_int8_exec * 16 * 16 * 32 * 2
+        vec_fops = vec_fp32 * 32 + vec_fp16_128lane_exec * 128 + \
+                   vec_fp16_64lane_exec * 64 + vec_int32_exec * 64 + vec_misc_exec * 32
+        task_fops = cube_fops + vec_fops
+
+        return task_fops
+
+    def _get_op_name(self, log_result):
+        """Get the operator name for current task_id."""
+        task_id = int(log_result[4].replace('0x', ''), self.HEX)
+        stream_id = int(log_result[17].replace('0x', ''), self.HEX)
+        if task_id < self._task_id_threshold:
+            task_id = '_'.join([str(stream_id), str(task_id)])
+        if str(task_id) not in self._op_task_dict:
+            return ""
+        op_name = self._op_task_dict[str(task_id)]
+
+        return op_name
+
+    def _get_op_avg_time_dict(self):
+        """Get the op average execution time."""
+        op_avg_time_dict = {}
+        optime_file_path = os.path.join(self._output_dir, self._optime_filename)
+
+        if not os.path.exists(optime_file_path):
+            logger.critical(f'The {optime_file_path} file does not exist.')
+            raise ProfilerFileNotFoundException(optime_file_path)
+        optime_file_path = os.path.realpath(optime_file_path)
+        try:
+            with open(optime_file_path, 'r') as f:
+                lines = f.readlines()
+                op_avg_time_lines = lines[3:]  # the first three lines are table header.
+                for line in op_avg_time_lines:
+                    op_name, avg_time = line.split()[:2]
+                    op_avg_time_dict[op_name] = avg_time
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when read {optime_file_path} file: {err}')
+            raise ProfilerIOException() from err
+
+        return op_avg_time_dict
+
+    def _add_flops_to_each_scope(self, op_name, task_fops):
+        """
+        Add task_fops to each scope of the op_name.
+
+        The top-level scope name is "Default" or "recompute_Default" or "Gradients".
+        To classify the same scope name under different top-level scope, a suffix name is added.
+        For op_name like "Default/network", the "network" will be renamed as "network(Default)".
+        For op_name like "recompute_Default/network", "network" --> "network(recompute_Default)".
+        For op_name like "Gradients/network", "network" --> "network(Gradients)".
+        For op_name like "Gradients/recompute_Default/network", "network" --> "network(recompute_Gradients)".
+        """
+        # Only extracts the scope name, remove the operator name.
+        scope_list = op_name.split('/')[:-1]
+        self._max_scope_num = max(self._max_scope_num, len(scope_list))
+        top_level_scope = scope_list[0]
+        suffix_name = ""
+        if op_name.startswith("Gradients/recompute_Default"):
+            suffix_name = "recompute_Gradients"
+        else:
+            suffix_name = top_level_scope
+        # To distinguish the same scope name at different scope level and different top level scope,
+        # the scope level and top level scope is added.
+        for level, scope_name in enumerate(scope_list):
+            scope_list[level] = scope_name + f"({level}_{suffix_name})"
+        scope_list[0] = top_level_scope
+
+        # Add root node (refers to total flops).
+        scope_list.insert(0, "Total")
+        scope_depth = len(scope_list)
+        for idx in range(scope_depth - 1):
+            key_name = '{} {}'.format(scope_list[idx], scope_list[idx + 1])
+            self._flops_each_scope.setdefault(key_name, 0)
+            self._flops_each_scope[key_name] += task_fops
+
+    def _format_scope_flops(self):
+        """
+        Format the flops of each scope to a Sankey Diagram.
+
+        The format of Sankey Diagram is:
+            {"nodes": [
+                        {"name": "Default"},
+                        {"name": "network"}
+                     ],
+             "links": [
+                        {"source": "Total", "target": "Default", "value": 555},
+                        {"source": "Default", "target": "network", "value": 555}
+                     ]
+            }
+        """
+        nodes, links = [], []
+        scope_name_set = set()
+        for scope_link, task_fops in self._flops_each_scope.items():
+            source, target = scope_link.split()
+            scope_name_set.update({source, target})
+            link = {
+                "source": source,
+                "target": target,
+                "value": round(task_fops, 3)
+            }
+            links.append(link)
+
+        for scope_name in scope_name_set:
+            node = {"name": scope_name}
+            nodes.append(node)
+
+        sankey_diagram = {"nodes": nodes, "links": links}
+        self._flops_sankey_diagram = {
+            "data": sankey_diagram,
+            "max_scope_num": self._max_scope_num
+        }
+
+    def _write_file(self, op_flops_list):
+        """Write the operator's flops related information into file."""
+        join_file_path = lambda x: os.path.join(self._output_dir, x)
+        output_file_path = join_file_path(self._flops_filename)
+        output_summary_file_path = join_file_path(self._flops_summary_filename)
+        output_flops_scope_file_path = join_file_path(self._flops_scope_filename)
+
+        try:
+            with os.fdopen(os.open(output_file_path, os.O_WRONLY | os.O_CREAT | os.O_TRUNC, 0o600), 'w') as f:
+                header = "op_full_name, MFLOPs(10^6), GFLOPS(10^9), FLOPS utilization(%) \n"
+                f.writelines(header)
+                for op_flops in op_flops_list:
+                    line = ", ".join(op_flops)
+                    f.writelines(line + '\n')
+            os.chmod(output_file_path, stat.S_IREAD | stat.S_IWRITE)
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when writing {output_file_path} file: {err}')
+            raise ProfilerIOException() from err
+
+        for key in self._flops_summary:
+            self._flops_summary[key] = round(self._flops_summary[key], 3)
+        try:
+            with os.fdopen(os.open(output_summary_file_path, os.O_WRONLY | os.O_CREAT | os.O_TRUNC, 0o600),
+                           'w') as json_file:
+                json.dump(self._flops_summary, json_file)
+            os.chmod(output_summary_file_path, stat.S_IREAD | stat.S_IWRITE)
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when write {output_summary_file_path} file: {err}')
+            raise ProfilerIOException() from err
+
+        try:
+            with os.fdopen(os.open(output_flops_scope_file_path, os.O_WRONLY | os.O_CREAT | os.O_TRUNC, 0o600),
+                           'w') as json_file:
+                json.dump(self._flops_sankey_diagram, json_file)
+            os.chmod(output_flops_scope_file_path, stat.S_IREAD | stat.S_IWRITE)
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when write {output_flops_scope_file_path} file: {err}')
+            raise ProfilerIOException() from err
+
+    def _get_aicore_files(self, profiler_dir):
+        """Get aicore files."""
+        aicore_files = self._search_file(profiler_dir)
+        if not aicore_files:
+            logger.warning("Aicore file does not exist.")
+            return[]
+
+        return aicore_files
+
+    def _search_file(self, input_dir):
+        """Search aicore file under specific input directory."""
+        # validate input_dir
+        if not os.path.isdir(input_dir):
+            raise ProfilerPathErrorException(
+                '{} does not exist or is not a dir'.format(input_dir)
+            )
+        # get aicore files
+        files = os.listdir(input_dir)
+        aicore_files = list(
+            filter(
+                lambda file: file.startswith(self._aicore_filename_pref) and not file.endswith('.done'),
+                files
+            )
+        )
+        # validate result
+        if len(aicore_files) > 1:
+            # the format of file name is like `aicore.data.$id.slice_$number`.
+            # use the $number as the sorted key
+            try:
+                aicore_files.sort(key=lambda path: int(path.rsplit('_', 1)[-1]))
+            except ValueError as err:
+                logger.warning("Unable to parse file names: %s. %s", aicore_files, err)
+                aicore_files = []
+        else:
+            aicore_files = list(
+                filter(
+                    lambda file: file.startswith(self._aicore_filename_pref) and not file.endswith('.done'),
+                    files
+                )
+            )
+            if len(aicore_files) >= 1:
+                logger.warning("The aicore file structure is changed, please upgrade " \
+                    "mindspore and regenerate profiling data")
+
+        file_paths = [os.path.join(input_dir, file) for file in aicore_files]
+        logger.info("Find %d aicore files.", len(file_paths))
+        return file_paths
+
+    def _get_all_step_time(self):
+        """Get the op average execution time."""
+        op_all_step_time = []
+        op_all_step_comp = []
+        _step_trace_file_path = os.path.join(self._output_dir, self._step_trace_filename)
+
+        if not os.path.exists(_step_trace_file_path):
+            logger.warning(f'The {_step_trace_file_path} file does not exist.')
+            return op_all_step_time, op_all_step_comp
+        try:
+            with open(_step_trace_file_path, 'r') as f:
+                lines = f.readlines()
+                op_all_step_time, op_all_step_comp = \
+                    self._get_bp_fp_time_by_line(lines, op_all_step_time, op_all_step_comp)
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when read {_step_trace_file_path} file: {err}')
+            raise ProfilerIOException() from err
+        logger.info("the train step is %d .", len(op_all_step_time))
+        if not op_all_step_time:
+            logger.warning(f'Empty when read {_step_trace_file_path} file, please check the valid'
+                           'data of this file.')
+        return op_all_step_time, op_all_step_comp
+
+    def _get_bp_fp_time_by_line(self, lines, op_all_step_time, op_all_step_comp):
+        """Get the bp and fp time with lines."""
+        # the last line is the average info.
+        op_avg_time_lines = lines[1:-1]
+        # train mode.
+        if self.is_training_mode_flag:
+            op_all_step_time, op_all_step_comp = \
+                self._read_line(4, 5, op_avg_time_lines, op_all_step_time, op_all_step_comp)
+        else:
+            # eval mode.
+            op_all_step_time, op_all_step_comp = \
+                self._read_line(4, 2, op_avg_time_lines, op_all_step_time, op_all_step_comp)
+        return op_all_step_time, op_all_step_comp
+
+    def _get_op_start_time(self):
+        """Get the op average execution time."""
+        op_start_time = []
+        _timeline_file_path = os.path.join(self._output_dir, self._timeline_data_filename)
+
+        if not os.path.exists(_timeline_file_path):
+            logger.critical(f'The {_timeline_file_path} file does not exist.')
+            raise ProfilerFileNotFoundException(_timeline_file_path)
+        try:
+            with open(_timeline_file_path, 'r') as f:
+                lines = f.readlines()
+                op_avg_time_lines = lines[1:]
+                for op_avg_idx in op_avg_time_lines:
+                    line = op_avg_idx.split(',')
+                    op_name = line[0]
+                    op_start = float(line[2])
+                    op_start_time.append([op_name, op_start])
+        except (IOError, OSError) as err:
+            logger.critical(f'Error occurred when read {_timeline_file_path} file: {err}')
+            raise ProfilerIOException() from err
+        if not op_start_time:
+            logger.warning(f'Empty when read {_timeline_file_path} file, please check the valid'
+                           'data of this file.')
+        return op_start_time

mindspore/profiler/parser/framework_enum.py

@@ -0,0 +1,111 @@
+# Copyright 2021-2022 Huawei Technologies Co., Ltd
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============================================================================
+"""Define framework enum data."""
+
+from enum import Enum, IntEnum
+
+
+class FileDataType(Enum):
+    """Define framework file data type."""
+    STEP_INFO = 'step_info'
+    HASH_DIC = 'hash_dic'
+    TENSOR_DATA_INFO = 'tensor_data_info'
+    TASK_DESC_INFO = 'task_desc_info'
+
+    @classmethod
+    def members(cls):
+        """Initializes a value of an object."""
+        return {member.value for member in cls}
+
+
+class VmDataType(IntEnum):
+    """Definition of vm data type."""
+    NUMBER_TYPE_BEGIN = 29
+    BOOL = 30
+    INT = 31
+    INT8 = 32
+    INT16 = 33
+    INT32 = 34
+    INT64 = 35
+    UINT = 36
+    UINT8 = 37
+    UINT16 = 38
+    UINT32 = 39
+    UINT64 = 40
+    FLOAT = 41
+    FLOAT16 = 42
+    FLOAT32 = 43
+    FLOAT64 = 44
+    COMPLEX = 45
+    NUMBER_TYPE_END = 46
+
+    @classmethod
+    def get_data_type_name(cls, num):
+        """
+        Get the name of data type by enum number.
+
+        Args:
+            num (int): Enum number.
+
+        Returns:
+            str, the name of data type.
+        """
+        data_type = cls._value2member_map_.get(num)
+        return 'UNKNOWN' if data_type is None else data_type.name
+
+
+class VmFormat(IntEnum):
+    """Define mindspore data type."""
+    UNKNOWN = 0
+    DEFAULT = 1
+    NC1KHKWHWC0 = 2
+    ND = 3
+    NCHW = 4
+    NHWC = 5
+    HWCN = 6
+    NC1HWC0 = 7
+    FRAC_Z = 8
+    C1HWNCOC0 = 9
+    FRAC_NZ = 10
+    NC1HWC0_C04 = 11
+    FRACTAL_Z_C04 = 12
+    NDHWC = 13
+    FRACTAL_ZN_LSTM = 14
+    FRACTAL_ZN_RNN = 15
+    ND_RNN_BIAS = 16
+    NDC1HWC0 = 17
+    NCDHW = 18
+    FRACTAL_Z_3D = 19
+    DHWNC = 20
+    DHWCN = 21
+
+    @classmethod
+    def get_format_name(cls, num):
+        """
+        Get the name of format by enum number.
+
+        Args:
+            num (int): Enum number.
+
+        Returns:
+            str, the name of data type.
+        """
+        format_name = cls._value2member_map_.get(num)
+        return 'UNKNOWN' if format_name is None else format_name.name
+
+
+MSPROF_DIFFERENCE = 200
+MSPROF_MIX_DATA_HASH_ID = 0
+MSPROF_MIX_DATA_STRING = 1