micropython-stubber 1.23.1.post1__py3-none-any.whl → 1.23.3__py3-none-any.whl

mpflash/mpflash/flash/uf2/linux.py

@@ -1,130 +1,136 @@
-""" Flashing UF2 based MCU on Linux"""
-
-# sourcery skip: snake-case-functions
-from __future__ import annotations
-
-import subprocess
-import sys
-import time
-from pathlib import Path
-from typing import List
-
-from loguru import logger as log
-from rich.progress import track
-
-from .boardid import get_board_id
-from .uf2disk import UF2Disk
-
-glb_dismount_me: List[UF2Disk] = []
-
-
-def get_uf2_drives():
-    """
-    Get a list of all the (un)mounted UF2 drives
-    """
-    # import blkinfo only on linux
-    from blkinfo import BlkDiskInfo
-
-    myblkd = BlkDiskInfo()
-    filters = {
-        "tran": "usb",
-    }
-    usb_disks = myblkd.get_disks(filters)
-    for disk in usb_disks:
-        if disk["fstype"] == "vfat":
-            uf2_part = disk
-            # unpartioned usb disk or partition (e.g. /dev/sdb )
-            # SEEED WIO Terminal is unpartioned
-            # print( json.dumps(uf2_part, indent=4))
-            uf2 = UF2Disk()
-            uf2.device_path = "/dev/" + uf2_part["name"]
-            uf2.label = uf2_part["label"]
-            uf2.mountpoint = uf2_part["mountpoint"]
-            yield uf2
-        elif disk["type"] == "disk" and disk.get("children") and len(disk.get("children")) > 0:
-            if disk.get("children")[0]["type"] == "part" and disk.get("children")[0]["fstype"] == "vfat":
-                uf2_part = disk.get("children")[0]
-                # print( json.dumps(uf2_part, indent=4))
-                uf2 = UF2Disk()
-                uf2.device_path = "/dev/" + uf2_part["name"]
-                uf2.label = uf2_part["label"]
-                uf2.mountpoint = uf2_part["mountpoint"]
-                yield uf2
-
-
-def pmount(disk: UF2Disk):
-    """
-    Mount a UF2 drive if there is no mountpoint yet.
-    """
-    global glb_dismount_me
-    if not disk.mountpoint:
-        if not disk.label:
-            disk.label = "UF2BOOT"
-        disk.mountpoint = f"/media/{disk.label}"
-        # capture error if pmount is not installed
-        try:
-            subprocess.run(["pmount", disk.device_path, disk.mountpoint])
-        except FileNotFoundError:
-            log.error("pmount not found, please install it using 'sudo apt install pmount'")
-            return
-        log.debug(f"Mounted {disk.label} at {disk.mountpoint}")
-        glb_dismount_me.append(disk)
-    else:
-        log.trace(f"\n{disk.label} already mounted at {disk.mountpoint}")
-
-
-def pumount(disk: UF2Disk):
-    """
-    Unmount a UF2 drive
-    """
-    if sys.platform != "linux":
-        log.error("pumount only works on Linux")
-        return
-    if disk.mountpoint:
-        subprocess.run(["pumount", disk.mountpoint])  # ), f"/media/{disk.label}"])
-        log.info(f"Unmounted {disk.label} from {disk.mountpoint}")
-        disk.mountpoint = f""
-    else:
-        log.warning(f"{disk.label} already dismounted")
-
-
-def dismount_uf2_linux():
-    global glb_dismount_me
-    for disk in glb_dismount_me:
-        pumount(disk)
-    glb_dismount_me = []
-
-
-def wait_for_UF2_linux(board_id: str, s_max: int = 10):
-    destination = ""
-    wait = 10
-    uf2_drives = []
-    # while not destination and wait > 0:
-    for _ in track(
-        range(s_max),
-        description=f"Waiting for mcu to mount as a drive ({s_max}s)",
-        transient=True,
-        show_speed=False,
-        refresh_per_second=1,
-        total=s_max,
-    ):
-        uf2_drives += list(get_uf2_drives())
-        for drive in get_uf2_drives():
-            pmount(drive)
-            time.sleep(1)
-            try:
-                if Path(drive.mountpoint, "INFO_UF2.TXT").exists():
-                    this_board_id = get_board_id(Path(drive.mountpoint))
-                    if not board_id or board_id.upper() in this_board_id.upper():
-                        # is it the correct board?
-                        destination = Path(drive.mountpoint)
-                        break
-                    continue
-            except PermissionError:
-                log.debug(f"Permission error on {drive.mountpoint}")
-                continue
-        if destination:
-            break
-        time.sleep(1)
-        wait -= 1
-    return destination
+""" Flashing UF2 based MCU on Linux"""
+
+# sourcery skip: snake-case-functions
+from __future__ import annotations
+
+import subprocess
+import sys
+import time
+from pathlib import Path
+from typing import List
+
+from loguru import logger as log
+from rich.progress import track
+
+from .boardid import get_board_id
+from .uf2disk import UF2Disk
+
+glb_dismount_me: List[UF2Disk] = []
+
+
+def get_uf2_drives():
+    """
+    Get a list of all the (un)mounted UF2 drives
+    """
+    # import blkinfo only on linux
+    from blkinfo import BlkDiskInfo
+
+    myblkd = BlkDiskInfo()
+    filters = {
+        "tran": "usb",
+    }
+    usb_disks = myblkd.get_disks(filters)
+    for disk in usb_disks:
+        if disk["fstype"] == "vfat":
+            uf2_part = disk
+            # unpartioned usb disk or partition (e.g. /dev/sdb )
+            # SEEED WIO Terminal is unpartioned
+            # print( json.dumps(uf2_part, indent=4))
+            uf2 = UF2Disk()
+            uf2.device_path = "/dev/" + uf2_part["name"]
+            uf2.label = uf2_part["label"]
+            uf2.mountpoint = uf2_part["mountpoint"]
+            yield uf2
+        elif disk["type"] == "disk" and disk.get("children") and len(disk.get("children")) > 0:
+            if (
+                disk.get("children")[0]["type"] == "part"
+                and disk.get("children")[0]["fstype"] == "vfat"
+            ):
+                uf2_part = disk.get("children")[0]
+                # print( json.dumps(uf2_part, indent=4))
+                uf2 = UF2Disk()
+                uf2.device_path = "/dev/" + uf2_part["name"]
+                uf2.label = uf2_part["label"]
+                uf2.mountpoint = uf2_part["mountpoint"]
+                yield uf2
+
+
+def pmount(disk: UF2Disk):
+    """
+    Mount a UF2 drive if there is no mountpoint yet.
+    """
+    global glb_dismount_me
+    if not disk.mountpoint:
+        if not disk.label:
+            disk.label = "UF2BOOT"
+        disk.mountpoint = f"/media/{disk.label}"
+        # capture error if pmount is not installed
+        try:
+            # drive is always vfat - so specify to have quicker results
+            subprocess.run(["pmount", "-t", "vfat", disk.device_path, disk.mountpoint])
+        except FileNotFoundError:
+            log.error(
+                "pmount not found, please install it using 'sudo apt install pmount', and add this user to the plugdev group."
+            )
+            return
+        log.debug(f"Mounted {disk.label} at {disk.mountpoint}")
+        glb_dismount_me.append(disk)
+    else:
+        log.trace(f"\n{disk.label} already mounted at {disk.mountpoint}")
+
+
+def pumount(disk: UF2Disk):
+    """
+    Unmount a UF2 drive
+    """
+    if sys.platform != "linux":
+        log.error("pumount only works on Linux")
+        return
+    if disk.mountpoint:
+        subprocess.run(["pumount", disk.mountpoint])  # ), f"/media/{disk.label}"])
+        log.info(f"Unmounted {disk.label} from {disk.mountpoint}")
+        disk.mountpoint = f""
+    else:
+        log.warning(f"{disk.label} already dismounted")
+
+
+def dismount_uf2_linux():
+    global glb_dismount_me
+    for disk in glb_dismount_me:
+        pumount(disk)
+    glb_dismount_me = []
+
+
+def wait_for_UF2_linux(board_id: str, s_max: int = 10):
+    destination = ""
+    wait = 10
+    uf2_drives = []
+    # while not destination and wait > 0:
+    for _ in track(
+        range(s_max),
+        description=f"Waiting for mcu to mount as a drive ({s_max}s)",
+        transient=True,
+        show_speed=False,
+        refresh_per_second=1,
+        total=s_max,
+    ):
+        uf2_drives += list(get_uf2_drives())
+        for drive in get_uf2_drives():
+            pmount(drive)
+            time.sleep(1)
+            try:
+                if Path(drive.mountpoint, "INFO_UF2.TXT").exists():
+                    this_board_id = get_board_id(Path(drive.mountpoint))
+                    if not board_id or board_id.upper() in this_board_id.upper():
+                        # is it the correct board?
+                        destination = Path(drive.mountpoint)
+                        break
+                    continue
+            except PermissionError:
+                log.debug(f"Permission error on {drive.mountpoint}")
+                continue
+        if destination:
+            break
+        time.sleep(1)
+        wait -= 1
+    return destination

mpflash/mpflash/flash/uf2/macos.py

@@ -1,42 +1,42 @@
-""" Flashing UF2 based MCU on macos"""
-
-# sourcery skip: snake-case-functions
-from __future__ import annotations
-
-import time
-from pathlib import Path
-from typing import Optional
-
-from rich.progress import track
-
-from .boardid import get_board_id
-
-
-def wait_for_UF2_macos(board_id: str, s_max: int = 10) -> Optional[Path]:
-    """Wait for the MCU to mount as a drive"""
-    if s_max < 1:
-        s_max = 10
-    destination = None
-    for _ in track(
-        range(s_max),
-        description=f"Waiting for mcu to mount as a drive ({s_max}s)",
-        transient=True,
-        show_speed=False,
-        refresh_per_second=1,
-        total=s_max,
-    ):
-        vol_mounts = Path("/Volumes").iterdir()
-        for vol in vol_mounts:
-            try:
-                if Path(vol, "INFO_UF2.TXT").exists():
-                    this_board_id = get_board_id(Path(vol))
-                    if not board_id or board_id.upper() in this_board_id.upper():
-                        destination = Path(vol)
-                        break
-                    continue
-            except OSError:
-                pass
-        if destination:
-            break
-        time.sleep(1)
-    return destination
+""" Flashing UF2 based MCU on macos"""
+
+# sourcery skip: snake-case-functions
+from __future__ import annotations
+
+import time
+from pathlib import Path
+from typing import Optional
+
+from rich.progress import track
+
+from .boardid import get_board_id
+
+
+def wait_for_UF2_macos(board_id: str, s_max: int = 10) -> Optional[Path]:
+    """Wait for the MCU to mount as a drive"""
+    if s_max < 1:
+        s_max = 10
+    destination = None
+    for _ in track(
+        range(s_max),
+        description=f"Waiting for mcu to mount as a drive ({s_max}s)",
+        transient=True,
+        show_speed=False,
+        refresh_per_second=1,
+        total=s_max,
+    ):
+        vol_mounts = Path("/Volumes").iterdir()
+        for vol in vol_mounts:
+            try:
+                if Path(vol, "INFO_UF2.TXT").exists():
+                    this_board_id = get_board_id(Path(vol))
+                    if not board_id or board_id.upper() in this_board_id.upper():
+                        destination = Path(vol)
+                        break
+                    continue
+            except OSError:
+                pass
+        if destination:
+            break
+        time.sleep(1)
+    return destination

mpflash/mpflash/flash/uf2/uf2disk.py

@@ -1,12 +1,12 @@
-"""Info to support mounting and unmounting of UF2 drives on linux and macos"""
-
-
-class UF2Disk:
-    """Info to support mounting and unmounting of UF2 drives on linux"""
-
-    device_path: str
-    label: str
-    mountpoint: str
-
-    def __repr__(self):
-        return repr(self.__dict__)
+"""Info to support mounting and unmounting of UF2 drives on linux and macos"""
+
+
+class UF2Disk:
+    """Info to support mounting and unmounting of UF2 drives on linux"""
+
+    device_path: str
+    label: str
+    mountpoint: str
+
+    def __repr__(self):
+        return repr(self.__dict__)

mpflash/mpflash/flash/uf2/windows.py

@@ -1,43 +1,43 @@
-# sourcery skip: snake-case-functions
-"""Flash a MCU with a UF2 bootloader on Windows"""
-
-from __future__ import annotations
-
-import time
-from pathlib import Path
-from typing import Optional
-
-from .boardid import get_board_id
-import psutil
-from rich.progress import track
-
-
-def wait_for_UF2_windows(board_id: str, s_max: int = 10)-> Optional[Path]:
-    """Wait for the MCU to mount as a drive"""
-    if s_max < 1:
-        s_max = 10
-    destination = None
-    for _ in track(
-        range(s_max),
-        description=f"Waiting for mcu to mount as a drive ({s_max}s)",
-        transient=True,
-        show_speed=False,
-        refresh_per_second=1,
-        total=s_max,
-    ):
-        drives = [drive.device for drive in psutil.disk_partitions()]
-        for drive in drives:
-            try:
-                if Path(drive, "INFO_UF2.TXT").exists():
-                    this_board_id = get_board_id(Path(drive))
-                    if not board_id or board_id.upper() in this_board_id.upper():
-                        # is it the correct board?
-                        destination = Path(drive)
-                        break
-                    continue
-            except OSError:
-                pass
-        if destination:
-            break
-        time.sleep(1)
-    return destination
+# sourcery skip: snake-case-functions
+"""Flash a MCU with a UF2 bootloader on Windows"""
+
+from __future__ import annotations
+
+import time
+from pathlib import Path
+from typing import Optional
+
+from .boardid import get_board_id
+import psutil
+from rich.progress import track
+
+
+def wait_for_UF2_windows(board_id: str, s_max: int = 10)-> Optional[Path]:
+    """Wait for the MCU to mount as a drive"""
+    if s_max < 1:
+        s_max = 10
+    destination = None
+    for _ in track(
+        range(s_max),
+        description=f"Waiting for mcu to mount as a drive ({s_max}s)",
+        transient=True,
+        show_speed=False,
+        refresh_per_second=1,
+        total=s_max,
+    ):
+        drives = [drive.device for drive in psutil.disk_partitions()]
+        for drive in drives:
+            try:
+                if Path(drive, "INFO_UF2.TXT").exists():
+                    this_board_id = get_board_id(Path(drive))
+                    if not board_id or board_id.upper() in this_board_id.upper():
+                        # is it the correct board?
+                        destination = Path(drive)
+                        break
+                    continue
+            except OSError:
+                pass
+        if destination:
+            break
+        time.sleep(1)
+    return destination