machineconfig 6.23__py3-none-any.whl → 8.12__py3-none-any.whl

machineconfig/jobs/installer/linux_scripts/timescaledb.sh

@@ -1,71 +0,0 @@
-#!/bin/bash
-# ⏱️ TIMESCALEDB INSTALLATION SCRIPT ⏱️
-# This script installs TimescaleDB on Ubuntu/Debian-based Linux distributions
-# Reference: https://docs.timescale.com/self-hosted/latest/install/installation-linux/
-
-echo """🔍 DETECTING SYSTEM | Identifying OS distribution version
-"""
-
-get_ubuntu_base_version() {
-    local os_codename=$(lsb_release -cs)
-    case "$os_codename" in
-        "wilma")
-            echo "noble"  # Map Mint Wilma to the base image Ubuntu 24.04 LTS
-            ;;
-        "virginia")
-            echo "jammy"  # Map Mint Virginia to the base image Ubuntu 22.04 LTS
-            ;;
-        *)
-            echo "$os_codename"
-            ;;
-    esac
-}
-
-ubuntu_version=$(get_ubuntu_base_version)
-echo "📋 Detected distribution: $ubuntu_version"
-
-echo """🐘 INSTALLING POSTGRESQL | Setting up PostgreSQL dependencies
-"""
-
-# Add PostgreSQL repository setup
-echo "🔧 Setting up PostgreSQL repository..."
-sudo nala install postgresql-common -y
-sudo /usr/share/postgresql-common/pgdg/apt.postgresql.org.sh -y
-
-echo """🔑 ADDING REPOSITORY KEYS | Setting up TimescaleDB repository
-"""
-
-# Add TimescaleDB repository
-echo "📝 Adding TimescaleDB repository to sources list..."
-echo "deb https://packagecloud.io/timescale/timescaledb/ubuntu/ $ubuntu_version main" | sudo tee /etc/apt/sources.list.d/timescaledb.list
-
-echo "🔐 Adding TimescaleDB GPG key..."
-wget --quiet -O - https://packagecloud.io/timescale/timescaledb/gpgkey | sudo gpg --dearmor -o /etc/apt/trusted.gpg.d/timescaledb.gpg
-
-echo """📦 INSTALLING TIMESCALEDB | Updating and installing packages
-"""
-
-# Update package lists
-echo "🔄 Updating package lists..."
-sudo nala update
-
-# Install TimescaleDB with PostgreSQL 16
-echo "📥 Installing PostgreSQL 16 and TimescaleDB..."
-sudo nala install -y postgresql-16 postgresql-client-16 timescaledb-2-postgresql-16
-
-echo """⚙️ CONFIGURING TIMESCALEDB | Optimizing database settings
-"""
-
-# Run TimescaleDB tuning tool
-echo "🔧 Running TimescaleDB tuning utility..."
-sudo timescaledb-tune
-
-# Restart PostgreSQL service
-echo "🔄 Restarting PostgreSQL service..."
-sudo systemctl restart postgresql
-
-echo """✅ INSTALLATION COMPLETE | TimescaleDB has been installed successfully
-"""
-echo "🚀 To connect to PostgreSQL, run: sudo -u postgres psql"
-echo "💡 To enable TimescaleDB in a database, run: CREATE EXTENSION IF NOT EXISTS timescaledb CASCADE;"
-echo "ℹ️ For more information, visit: https://docs.timescale.com/self-hosted/latest/install/"

machineconfig/jobs/linux/msc/cli_agents.sh

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-
-# Vscode extensions for AI-assisted coding.
-# Github copilot
-# Roo
-# Cline
-# Kilocode
-# Continue
-# CodeGPT
-# qodo (and cli)
-
-# Editors based on AI
-# Kiro
-# Cursor
-# Warp

machineconfig/jobs/python/python_ve_symlink.py

@@ -1,37 +0,0 @@
-"""Symlinks"""
-
-from rich import box
-from rich.console import Console
-from rich.panel import Panel
-
-from machineconfig.utils.path_extended import PathExtended
-
-
-def main() -> None:
-    console = Console()
-    console.print(
-        Panel.fit(
-            "\n".join(["Create symlinks for virtual environments"]),
-            title="🔗 Symlink Creator",
-            border_style="cyan",
-            box=box.ROUNDED,
-        )
-    )
-    target = PathExtended(input("🎯 Symlink to which target? ")).expanduser().absolute()
-    source = input(f"📍 Symlink from which source? [default to: CWD/{target.name}] ") or PathExtended.cwd().joinpath(target.name)
-    if isinstance(source, str):
-        source = PathExtended(source).expanduser().absolute()
-    source.symlink_to(target, overwrite=True)
-    console.print(
-        Panel.fit(
-            "\n".join([f"📍 Source: {source}", f"🎯 Target: {target}"]),
-            title="✅ Symlink Created",
-            border_style="green",
-            box=box.ROUNDED,
-        )
-    )
-    console.print("🔗 Finished creating symlink.", style="bold cyan")
-
-
-if __name__ == "__main__":
-    pass

machineconfig/jobs/python/vscode/api.py

@@ -1,57 +0,0 @@
-from pathlib import Path
-from typing import Annotated
-
-import typer
-from rich import box
-from rich.console import Console
-from rich.panel import Panel
-from rich.syntax import Syntax
-
-from machineconfig.utils.accessories import randstr
-
-
-def open_file_in_new_instance(file_path: str):
-    import git
-
-    repo = git.Repo(search_parent_directories=True)
-    repo_path = repo.working_tree_dir
-    # Ensure repo_path is not None before passing to Path
-    repo_name = Path(repo_path if repo_path is not None else ".").name
-    repo_copy_name = f"{repo_name}_{randstr(5)}"
-    copy_path = Path.home().joinpath(".config", "machingconfig", "vscode_api", repo_name, repo_copy_name)
-    copy_path.parent.mkdir(parents=True, exist_ok=True)
-    code = f"""
-ln -s {repo_path} {copy_path}
-cd {copy_path}
-code --profile bitProfile --new-window {file_path}
-"""
-    console = Console()
-    panel = Panel(
-        Syntax(code, lexer="bash"),
-        title="🔍 VS CODE API | Opening file in new instance",
-        subtitle=f"📂 {file_path}",
-        border_style="bright_blue",
-        box=box.DOUBLE,
-        padding=(1, 2),
-    )
-    console.print(panel)
-
-    code_path = Path.home().joinpath(".config", "machingconfig", "vscode_api", "code_temp")
-    code_path.parent.mkdir(parents=True, exist_ok=True)
-    code_path.write_text(code, encoding="utf-8")
-    code_path.chmod(0o755)
-    import subprocess
-
-    subprocess.run([str(code_path)], shell=True, check=True)
-
-
-def main(file_path: Annotated[str, typer.Argument(help="Path to the file to open")]) -> None:
-    open_file_in_new_instance(file_path)
-
-
-def arg_parser() -> None:
-    typer.run(main)
-
-
-if __name__ == "__main__":
-    arg_parser()

machineconfig/jobs/windows/archive/archive_pygraphviz.ps1

@@ -1,12 +0,0 @@
-
-# install https://visualstudio.microsoft.com/visual-cpp-build-tools/
-# include
-# winget install Microsoft.VisualStudio.2022.BuildTools
-# winget install Microsoft.VC++2015-2022Redist-x86
-
-
-uv pip install --global-option=build_ext --global-option="-IC:\Program Files\Graphviz\include" --global-option="-LC:\Program Files\Graphviz\lib" pygraphviz
-# not including the options as above (from https://pygraphviz.github.io/documentation/stable/install.html)
-# would result in an error like this: pygraphviz/graphviz_wrap.c(2711): fatal error C1083: Cannot open include file: 'graphviz/cgraph.h': No such file or directory
-
-

machineconfig/jobs/windows/archive/openssh-server_add_key.ps1

@@ -1,7 +0,0 @@
-
-$sshfile=""
-$ErrorActionPreference = "Stop"
-$sshd_dir = "$env:ProgramData\ssh"
-cp "$sshd_dir\administrators_authorized_keys" "$sshd_dir\administrators_authorized_keys.orig"
-Get-Content $sshfile >> "$sshd_dir\administrators_authorized_keys"
-Restart-Service sshd -Force

machineconfig/jobs/windows/archive/openssh-server_copy-ssh-id.ps1

@@ -1,14 +0,0 @@
-
-# This is the Windows equivalent of copy-ssh-id on Linux.
-# Just like the original function, it is a convenient way of doing two things in one go:
-# 1- copy a certain public key to the remote machine.
-#    scp ~/.ssh/id_rsa.pub $remote_user@$remote_host:~/.ssh/authorized_keys
-# 2- Store the value on the remote in a file called .ssh/authorized_keys
-#    ssh $remote_user@$remote_host "echo $public_key >> ~/.ssh/authorized_keys"
-# Idea from: https://www.chrisjhart.com/Windows-10-ssh-copy-id/
-
-$key_value = cat ($env:USERPROFILE + "\.ssh\id_rsa.pub")
-ssh $args[0] "powershell.exe -Command type $key_value >> .ssh/authorized_keys"
-
-$my_keys='https://github.com/thisismygitrepo.keys'
-(Invoke-WebRequest $my_keys).Content >> .ssh/authorized_keys

machineconfig/scripts/linux/fzf2g

@@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-
-# uses fzf as interactive ripgrep launcher.
-# from https://github.com/junegunn/fzf/blob/master/ADVANCED.md#using-fzf-as-interative-ripgrep-launcher
-
-# 1. Search for text in files using Ripgrep
-# 2. Interactively restart Ripgrep with reload action
-# 3. Open the file in Vim
-
-RG_PREFIX="rg --column --line-number --no-heading --color=always --smart-case "
-INITIAL_QUERY="${*:-}"
-IFS=: read -ra selected < <(
-  FZF_DEFAULT_COMMAND="$RG_PREFIX $(printf %q "$INITIAL_QUERY")" \
-  fzf --ansi \
-      --disabled --query "$INITIAL_QUERY" \
-      --bind "change:reload:sleep 0.1; $RG_PREFIX {q} || true" \
-      --delimiter : \
-      --preview 'bat --color=always {1} --highlight-line {2}' \
-      --preview-window 'up,60%,border-bottom,+{2}+3/3,~3'
-)
-[ -n "${selected[0]}" ] && lvim "${selected[0]}" "+${selected[1]}"

machineconfig/scripts/linux/fzfag

@@ -1,17 +0,0 @@
-#!/usr/bin/env bash
-
-# uses fzf as filter After ripgrep (secondary filter)
-# from https://github.com/junegunn/fzf/blob/master/ADVANCED.md#ripgrep-integration
-# 1. Search for text in files using Ripgrep
-# 2. Interactively narrow down the list using fzf
-# 3. Open the file in Vim
-IFS=: read -ra selected < <(
-  rg --color=always --line-number --no-heading --smart-case "${*:-}" |
-    fzf --ansi \
-        --color "hl:-1:underline,hl+:-1:underline:reverse" \
-        --delimiter : \
-        --preview 'batcat --color=always {1} --highlight-line {2}' \
-        --preview-window 'up,60%,border-bottom,+{2}+3/3,~3'
-)
-[ -n "${selected[0]}" ] && lvim "${selected[0]}" "+${selected[1]}"
-

machineconfig/scripts/linux/fzffg

@@ -1,25 +0,0 @@
-#!/usr/bin/env bash
-# fzf from grep
-# from https://github.com/junegunn/fzf/blob/master/ADVANCED.md#switching-to-fzf-only-search-mode
-
-# Two-phase filtering with Ripgrep and fzf
-#
-# 1. Search for text in files using Ripgrep
-# 2. Interactively restart Ripgrep with reload action
-#    * Press alt-enter to switch to fzf-only filtering
-# 3. Open the file in Vim
-RG_PREFIX="rg --column --line-number --no-heading --color=always --smart-case "
-INITIAL_QUERY="${*:-}"
-IFS=: read -ra selected < <(
-  FZF_DEFAULT_COMMAND="$RG_PREFIX $(printf %q "$INITIAL_QUERY")" \
-  fzf --ansi \
-      --color "hl:-1:underline,hl+:-1:underline:reverse" \
-      --disabled --query "$INITIAL_QUERY" \
-      --bind "change:reload:sleep 0.1; $RG_PREFIX {q} || true" \
-      --bind "alt-enter:unbind(change,alt-enter)+change-prompt(2. fzf> )+enable-search+clear-query" \
-      --prompt '1. ripgrep> ' \
-      --delimiter : \
-      --preview 'batcat --color=always {1} --highlight-line {2}' \
-      --preview-window 'up,60%,border-bottom,+{2}+3/3,~3'
-)
-[ -n "${selected[0]}" ] && lvim "${selected[0]}" "+${selected[1]}"

machineconfig/scripts/linux/fzfrga

@@ -1,21 +0,0 @@
-#!/usr/bin/env bash
-
-# From https://github.com/phiresky/ripgrep-all/wiki/fzf-Integration
-
-rga-fzf() {
-	RG_PREFIX="rga --files-with-matches"
-	local file
-	file="$(
-		FZF_DEFAULT_COMMAND="$RG_PREFIX '$1'" \
-			fzf --sort --preview="[[ ! -z {} ]] && rga --pretty --context 5 {q} {}" \
-				--phony -q "$1" \
-				--bind "change:reload:$RG_PREFIX {q}" \
-				--preview-window="70%:wrap"
-	)" &&
-	echo "opening $file" &&
-	xdg-open "$file"
-}
-
-
-# run the function
-rga-fzf

machineconfig/scripts/linux/other/share_smb

@@ -1 +0,0 @@
-#!/usr/bin/env bash

machineconfig/scripts/linux/other/switch_ip

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-
-echo "🔁 Switching IP ... "
-echo "Current IP: $(curl -s api.ipify.org)"
-echo "🔻 Deactivating current connection ... "
-warp-cli registration delete
-# echo "✅ Deactivated current connection ... "
-echo "😴 Sleeping for 2 seconds ... "
-sleep 2
-echo "🔼 Registering new connection ... "
-warp-cli registration new
-# echo "✅ Registered new connection ... "
-echo "🔗 Connecting ... "
-warp-cli connect
-echo "😴 Sleeping for 2 seconds ... "
-sleep 2
-echo "🔍 Checking status of warp ... "
-warp-cli status
-echo "🔍 Checking new IP ... $(curl -s api.ipify.org) "
-echo "✅ Done ... "

machineconfig/scripts/linux/skrg

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-# from https://github.com/lotabout/skim#interactive-mode
-sk --ansi -i -c 'rg --color=always --line-number "{}"'

machineconfig/scripts/linux/warp-cli.sh

@@ -1,122 +0,0 @@
-#!/usr/bin/env bash
-# Installs Cloudflare WARP (warp-cli) on supported Ubuntu / Debian systems.
-# Usage: sudo ./warp-cli.sh [--allow-unsupported] [--force-reinstall]
-
-set -euo pipefail
-
-ALLOW_UNSUPPORTED=0
-FORCE_REINSTALL=0
-
-for arg in "$@"; do
-  case "$arg" in
-    --allow-unsupported) ALLOW_UNSUPPORTED=1 ;;
-    --force-reinstall) FORCE_REINSTALL=1 ;;
-    -h|--help)
-      printf "Usage: %s [--allow-unsupported] [--force-reinstall]\n" "$0"
-      exit 0
-      ;;
-    *)
-      printf "Unknown argument: %s\n" "$arg" >&2
-      exit 2
-      ;;
-  esac
-done
-
-require_root() {
-  if [ "${EUID}" -ne 0 ]; then
-    printf "Please run as root (use sudo).\n" >&2
-    exit 1
-  fi
-}
-
-have_cmd() { command -v "$1" >/dev/null 2>&1; }
-
-detect_os() {
-  if have_cmd lsb_release; then
-    DIST_ID=$(lsb_release -si 2>/dev/null | tr '[:upper:]' '[:lower:]')
-    CODENAME=$(lsb_release -sc 2>/dev/null | tr '[:upper:]' '[:lower:]')
-  elif [ -f /etc/os-release ]; then
-    # shellcheck disable=SC1091
-    . /etc/os-release
-    DIST_ID=$(printf "%s" "${ID:-}" | tr '[:upper:]' '[:lower:]')
-    CODENAME=$(printf "%s" "${VERSION_CODENAME:-}" | tr '[:upper:]' '[:lower:]')
-  else
-    printf "Cannot detect distribution. Install lsb_release or provide /etc/os-release.\n" >&2
-    exit 1
-  fi
-}
-
-is_supported() {
-  case "$DIST_ID" in
-    ubuntu)
-      # Supported: noble jammy focal (older: bionic xenial)
-      case "$CODENAME" in
-        noble|jammy|focal|bionic|xenial) return 0 ;; esac ;;
-    debian)
-      # Supported: bookworm bullseye buster (older: stretch)
-      case "$CODENAME" in
-        bookworm|bullseye|buster|stretch) return 0 ;; esac ;;
-  esac
-  return 1
-}
-
-add_key() {
-  local key_path="/usr/share/keyrings/cloudflare-warp-archive-keyring.gpg"
-  if [ -s "$key_path" ]; then
-    return 0
-  fi
-  curl -fsSL https://pkg.cloudflareclient.com/pubkey.gpg | gpg --yes --dearmor --output "$key_path"
-}
-
-add_repo() {
-  local list_file="/etc/apt/sources.list.d/cloudflare-client.list"
-  if grep -q "pkg.cloudflareclient.com" "$list_file" 2>/dev/null; then
-    return 0
-  fi
-  echo "deb [signed-by=/usr/share/keyrings/cloudflare-warp-archive-keyring.gpg] https://pkg.cloudflareclient.com/ ${CODENAME} main" > "$list_file"
-}
-
-need_update=0
-install_package() {
-  if dpkg -s cloudflare-warp >/dev/null 2>&1; then
-    if [ "$FORCE_REINSTALL" -eq 1 ]; then
-      apt-get install --reinstall -y cloudflare-warp
-    else
-      printf "cloudflare-warp already installed. Use --force-reinstall to reinstall.\n"
-    fi
-  else
-    apt-get install -y cloudflare-warp
-  fi
-}
-
-main() {
-  require_root
-  if ! have_cmd apt-get; then
-    printf "apt-get not found. This script supports only Debian/Ubuntu.\n" >&2
-    exit 1
-  fi
-  detect_os
-  if ! is_supported; then
-    if [ "$ALLOW_UNSUPPORTED" -ne 1 ]; then
-      printf "Distribution %s (%s) not in supported list. Use --allow-unsupported to proceed.\n" "$DIST_ID" "$CODENAME" >&2
-      exit 3
-    else
-      printf "Proceeding on unsupported distribution %s (%s).\n" "$DIST_ID" "$CODENAME"
-    fi
-  fi
-  pre_key_checksum=$( [ -f /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg ] && sha256sum /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg | cut -d' ' -f1 || true )
-  add_key
-  post_key_checksum=$(sha256sum /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg | cut -d' ' -f1)
-  if [ "$pre_key_checksum" != "$post_key_checksum" ]; then need_update=1; fi
-  repo_before=$(grep -R "pkg.cloudflareclient.com" /etc/apt/sources.list.d 2>/dev/null || true)
-  add_repo
-  repo_after=$(grep -R "pkg.cloudflareclient.com" /etc/apt/sources.list.d 2>/dev/null || true)
-  if [ "$repo_before" != "$repo_after" ]; then need_update=1; fi
-  if [ "$need_update" -eq 1 ]; then
-    apt-get update
-  fi
-  install_package
-  printf "Done. Basic usage: 'warp-cli register' then 'warp-cli connect'. For account: 'warp-cli set-mode warp'.\n"
-}
-
-main "$@"

machineconfig/scripts/linux/z_ls

@@ -1,104 +0,0 @@
-#!/usr/bin/env bash
-
-# if variable zellij is not set, then set it to /$HOME/.local/bin/zellij
-if [ -z "$zellij" ]; then
-  # zellij="$HOME/.local/bin/zellij"
-  PATH="$HOME/.local/bin:$PATH"
-fi
-
-# adopted from https://zellij.dev/documentation/integration.html
-ZJ_SESSIONS=$(zellij list-sessions)
-# echo "$ZJ_SESSIONS"
-
-
-attach=false
-
-while (( "$#" )); do
-  case "$1" in
-    --attach)
-      attach=true
-      shift
-      ;;
-    *)
-      shift
-      ;;
-  esac
-done
-
-if $attach; then
-  echo "attached"
-fi
-
-
-NO_SESSIONS=$(echo "${ZJ_SESSIONS}" | wc -l)
-# if ZJ_SESSIONS is empty, then set NO_SESSIONS to 0
-if [ -z "${ZJ_SESSIONS}" ]; then
-    NO_SESSIONS=0
-fi
-
-# check whether the string "(current)" is in ZJ_SESSIONS
-if [[ "${ZJ_SESSIONS}" == *"(current)"* ]]; then
-    # if so, then we are in a zellijsession
-    echo "already inside a session, existing."
-    COMMANDS=$(ls $HOME/.config/machineconfig/settings/zellij/commands)
-    # fzf the results
-    res="$(echo -e "${COMMANDS}" | fzf --ansi)"
-    # run the bash fiZJ_SESSIONSle chosen
-    bash $HOME/.config/machineconfig/settings/zellij/commands/$res
-
-else # ==> we are not in a zellijsession
-  if [ "${NO_SESSIONS}" -ge 1 ]; then  # sessions do exist
-
-      # remove sessions that have 'EXITED' in them
-      ZJ_SESSIONS=$(echo -e "${ZJ_SESSIONS}" | grep -v "EXITED")
-
-      echo "zj_sessions:$ZJ_SESSIONS:end of zj_sessions"
-
-      # if the result has only 1 line in it and $attach is raised, then attach to it and exit the if statement and the script
-      NO_SESSIONS=$(echo "${ZJ_SESSIONS}" | wc -l)
-
-      echo "NO_SESSIONS: $NO_SESSIONS"
-
-      # if ZJ_SESSIONS is empty, then set NO_SESSIONS to 0
-      if [ -z "${ZJ_SESSIONS}" ]; then
-          NO_SESSIONS=0
-          zellij --layout st2
-          exit 0
-      fi
-      echo "NO_SESSIONS: $NO_SESSIONS"
-
-      if [ "${NO_SESSIONS}" -eq 1 ] && $attach; then
-        chosen_session=$(echo -e "${ZJ_SESSIONS}" | cut -d' ' -f1)
-        # remove the ansi colors from chosen_session
-        chosen_session=$(echo $chosen_session | sed 's/\x1b\[[0-9;]*m//g')
-        # echo "attaching to $chosen_session exclusively."
-        zellij attach "$chosen_session"
-        exit 0
-      fi
-
-      # add my options to the list of sessions
-      # if number of sessions is zero, then exclude ZJ_SESSIONS from the fzf options
-      if [ "${NO_SESSIONS}" -eq 0 ]; then
-          ZJ_SESSIONS="new_session\nkill_all_and_create_fresh_one\nexit_zellij"
-        else
-          ZJ_SESSIONS="$ZJ_SESSIONS\nnew_session\nkill_all_and_create_fresh_one\nexit_zellij"
-      fi
-
-      res="$(echo -e "${ZJ_SESSIONS}" | fzf --ansi)"
-      # split `res` at the first space, and take the first element
-      res=$(echo $res | cut -d' ' -f1)
-      if [ "${res}" = "exit_zellij" ]; then
-          echo "existing zellij."
-      elif [ "${res}" = "new_session" ]; then
-        zellij --layout st2  # can't specify name here. I can call it "main" only if it is the first, otherwise name conflict! also, can't use attach -c syntax because layout can't be specified.
-      elif [ "${res}" = "kill_all_and_create_fresh_one" ]; then
-        zellij ka -y
-        zellij --layout st2
-      else
-        zellij attach $res # options --mirror-session false
-      fi
-  else  # no sessions, create one called main
-     zellij --layout st2
-  fi
-
-fi

machineconfig/scripts/python/ai/command_runner/prompt.txt

@@ -1,9 +0,0 @@
-
-I have started a watch-exec server in my terminal and its working now.
-I have set it up to re-run thi script `.ai/terminal/debug/command_runner.sh` automatically.
-A re-run is triggered upon any change of any python file in the repo, or, any change in the make_output.sh script itself.
-The script redirects the output from terminal to the file ./.ai/debug/terminal_output.txt
-Run takes 50 ms only. So by the time you finish editing any python file or the command runner script, the new output is ready for you to read in that text file,
-this makes it much faster for you to iterate because pulling the terminal and closing it every time is a bit slow.
-Please use the terminal_output.txt as your main iteration driver.
-please fix the mistakes that you can see in terminal output.

machineconfig/scripts/python/devops_helpers/cli_config.py

@@ -1,81 +0,0 @@
-
-
-from typing import Literal, Annotated, Optional
-from pathlib import Path
-import typer
-
-
-
-def private(method: Annotated[Literal["symlink", "copy"], typer.Option(..., "--method", "-m", help="Method to use for linking files")],
-                             on_conflict: Annotated[Literal["throwError", "overwriteSelfManaged", "backupSelfManaged", "overwriteDefaultPath", "backupDefaultPath"], typer.Option(..., "--on-conflict", "-o", help="Action to take on conflict")] = "throwError",
-                             which: Annotated[Optional[str], typer.Option(..., "--which", "-w", help="Specific items to process")] = None,
-                             interactive: Annotated[bool, typer.Option(..., "--interactive", "-ia", help="Run in interactive mode")] = False):
-    """🔗 Manage private configuration files."""
-    import machineconfig.profile.create_links_export as create_links_export
-    create_links_export.main_private_from_parser(method=method, on_conflict=on_conflict, which=which, interactive=interactive)
-
-def public(method: Annotated[Literal["symlink", "copy"], typer.Option(..., "--method", "-m", help="Method to use for setting up the config file.")],
-                            on_conflict: Annotated[Literal["throwError", "overwriteDefaultPath", "backupDefaultPath"], typer.Option(..., "--on-conflict", "-o", help="Action to take on conflict")] = "throwError",
-                            which: Annotated[Optional[str], typer.Option(..., "--which", "-w", help="Specific items to process")] = None,
-                            interactive: Annotated[bool, typer.Option(..., "--interactive", "-ia", help="Run in interactive mode")] = False):
-    """🔗 Manage public configuration files."""
-    import machineconfig.profile.create_links_export as create_links_export
-    create_links_export.main_public_from_parser(method=method, on_conflict=on_conflict, which=which, interactive=interactive)
-
-def dotfile(file: Annotated[str, typer.Argument(help="file/folder path.")],
-    overwrite: Annotated[bool, typer.Option("--overwrite", "-o", help="Overwrite.")] = False,
-    dest: Annotated[str, typer.Option("--dest", "-d", help="destination folder")] = "",
-    ):
-    """🔗 Manage dotfiles."""
-    import machineconfig.scripts.python.devops_helpers.cli_config_dotfile as dotfile_module
-    dotfile_module.main(file=file, overwrite=overwrite, dest=dest)
-
-
-def shell():
-    """🔗 Configure your shell profile."""
-    from machineconfig.profile.create_shell_profile import create_default_shell_profile
-    create_default_shell_profile()
-
-def path():
-    """📚 NAVIGATE PATH variable with TUI"""
-    from machineconfig.scripts.python import env_manager as navigator
-    from pathlib import Path
-    path = Path(navigator.__file__).resolve().parent.joinpath("path_manager_tui.py")
-    from machineconfig.utils.code import run_shell_script
-    run_shell_script(f"""uv run --with "machineconfig>=5.87,textual" {path}""")
-
-def pwsh_theme():
-    """🔗 Select powershell prompt theme."""
-    import machineconfig.scripts.python.devops_helpers.themes as themes
-    file = Path(themes.__file__).parent / "choose_pwsh_theme.ps1"
-    import subprocess
-    subprocess.run(["pwsh", "-File", str(file)])
-
-def copy_assets(which: Annotated[Literal["scripts", "settings", "both"], typer.Argument(..., help="Which assets to copy")]):
-    """🔗 Copy asset files from library to machine."""
-    import machineconfig.profile.create_helper as create_helper
-    match which:
-        case "both":
-            create_helper.copy_assets_to_machine(which="scripts")
-            create_helper.copy_assets_to_machine(which="settings")
-        case _:
-            create_helper.copy_assets_to_machine(which=which)
-
-
-def get_app():
-    config_apps = typer.Typer(help="⚙️ [c] configuration subcommands", no_args_is_help=True)
-    config_apps.command("private", no_args_is_help=True, help="🔗  [v] Manage private configuration files.")(private)
-    config_apps.command("v", no_args_is_help=True, hidden=True)(private)
-    config_apps.command("public", no_args_is_help=True, help="🔗  [b] Manage public configuration files.")(public)
-    config_apps.command("b", no_args_is_help=True, help="Manage public configuration files.", hidden=True)(public)
-    config_apps.command("dotfile", no_args_is_help=True, help="🔗  [d] Manage dotfiles.")(dotfile)
-    config_apps.command("d", no_args_is_help=True,  hidden=True)(dotfile)
-    config_apps.command("shell", no_args_is_help=False, help="🔗  [s] Configure your shell profile.")(shell)
-    config_apps.command("s", no_args_is_help=False, help="Configure your shell profile.", hidden=True)(shell)
-    config_apps.command("path", no_args_is_help=False, help="📚  [p] NAVIGATE PATH variable with TUI")(path)
-    config_apps.command("p", no_args_is_help=False, help="NAVIGATE PATH variable with TUI", hidden=True)(path)
-    config_apps.command("pwsh-theme", no_args_is_help=False, help="🔗  [t] Select powershell prompt theme.")(pwsh_theme)
-    config_apps.command("t", no_args_is_help=True, help="Select powershell prompt theme.", hidden=True)(pwsh_theme)
-    config_apps.command("copy-assets", no_args_is_help=True, help="🔗  [c] Copy asset files from library to machine.", hidden=False)(copy_assets)
-    config_apps.command("c", no_args_is_help=True, help="Copy asset files from library to machine.", hidden=True)(copy_assets)
-    return config_apps