litegrip-python 1.2.0__py3-none-any.whl → 1.2.1__py3-none-any.whl

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
litegrip/actions.py CHANGED
@@ -151,6 +151,37 @@ class MotionConfig:
151
151
  # 照设定的力往下发。
152
152
  press_safety: float = 0.9 # 预算余量:撞上时实测力落在设定值之下
153
153
 
154
+ # ── 带设定力的接近段「从起点就没动过」的判据 mm ───────────────────
155
+ # 位置窗口判据只能看见「没动」,可「没动」有三种:真顶到工件、顶到限位、
156
+ # 以及**这一段的力矩预算低于静摩擦,压根没能脱离**。第三种最危险:它会被
157
+ # 当成接触,交接给纯力矩的保力段 —— 那一段没有位置项也没有速度项,而保力
158
+ # 的力矩是设定值的 1.0 倍、接近段只有 0.9 倍,多出来的这一成正好越过脱离
159
+ # 力,于是夹爪带着设定力在自由行程里一路加速(2026-10-29 实测:2 N 夹取
160
+ # 的接近段压 0.18 Nm 原地不动,接手的保力段压 0.20 Nm 推了 19 mm)。
161
+ #
162
+ # 所以带设定力的接近段里,位移小于这个值的停住,且预算压不出脱离力(见
163
+ # ``breakaway_nm``)时**不算接触**:报「没能脱离静摩擦」(``MoveResult.no_bite``)、
164
+ # 撤力、不交接。代价是「工件就贴在起点旁边、夹爪还没走开就顶上了」也按这个
165
+ # 处理 —— 那一次夹取会报失败,而反过来放行会把一次误判变成一次带力冲程,
166
+ # 两边代价不对称,所以选失败。
167
+ #
168
+ # 0.5 mm 是台架闭合侧粘滑死区(约 0.0103 rad ≈ 0.76 mm)的下面:比死区更短
169
+ # 的「顶住」读数本来就分辨不出来,真工件也做不到停在这么窄的缝里。
170
+ no_bite_mm: float = 0.5
171
+
172
+ # ── 脱离力:判断「没动」是哪一种的力矩门槛 ────────────────────────
173
+ # 上面那条判据只在**这一段的预算本来就压不出脱离力**时才成立。预算远高于
174
+ # 脱离力时,夹爪没动几乎只可能是顶上了东西 —— 那正是「夹住了」,该交接,
175
+ # 保力段照着设定值压,不会跑。所以判据再收紧一层:只有预算
176
+ # (``force_n × 0.1 × press_safety``) 低于这个值,零位移才判 ``no_bite``;
177
+ # 否则照旧 ``stalled``。少了这一层,20 N 夹一个已经贴在张开侧的工件、或者
178
+ # ``release(abort=True)`` 之后原地重夹(那一次松开不发张开指令),都会被拒。
179
+ #
180
+ # 0.2 Nm 就是这台机器上实测的脱离力(2026-10-29:接近段 0.18 Nm 原地不动,
181
+ # 保力段 0.20 Nm 推走 19 mm,落在 1.8–2.0 N 之间)。换成设定值:≤ 2.2 N 的
182
+ # 夹取预算不到它,零位移判拒夹;≥ 2.5 N 的预算在它之上,零位移判顶住东西。
183
+ breakaway_nm: float = 0.2
184
+
154
185
  # ── 行进段堵转保护(≈7 N) ────────────────────────────────────────
155
186
  # 普通移动(``press=True`` 的 open/close)行进段的领先上限是 max_lead_mm,
156
187
  # 一旦夹爪在半路被硬挡,``kp × 领先上限`` ≈ 7.6 N·m 会一直压着;而位置
@@ -276,6 +307,11 @@ class MoveResult:
276
307
  # 只有 ``grasp()`` 的带力接近段会检查它:那一段走的不是用户要的终点,而是
277
308
  # 夹取的第一步,松开请求意味着「别夹了」。``grasp()`` 据此改走张开。
278
309
  release_requested: bool = False
310
+ # 带设定力的接近段**从起点就没动过**:停住时离起始位置还不到
311
+ # :attr:`MotionConfig.no_bite_mm`。这不是接触 —— 也可能是力矩预算低于静
312
+ # 摩擦、夹爪压根没能脱离(判据和代价见 ``MotionConfig.no_bite_mm``)。置位
313
+ # 时 ``stalled`` 为 False,``grasp()`` 不交接、直接撤力返回。
314
+ no_bite: bool = False
279
315
 
280
316
  def __bool__(self) -> bool:
281
317
  return self.ok
@@ -302,6 +338,11 @@ class GraspResult:
302
338
  # 请求后先完成松开(张开到 ``max(当前, 夹取点) + 余量``),再返回。与
303
339
  # ``travel_guard`` 的区别是这不是故障 —— 松开是用户要的正常收尾。
304
340
  released: bool = False
341
+ # 接近段从起点就没能推动夹爪:位移小于 ``MotionConfig.no_bite_mm``,设定值
342
+ # 的 0.9 倍力矩压不出脱离静摩擦需要的力。这一条**不交接**,保力段一帧都不
343
+ # 发 —— 交过去它会在自由行程里一路加速(见 ``MotionConfig.no_bite_mm``)。
344
+ # 置位时 ``stalled`` / ``reached`` 都是 False,``cycles`` 为 0。
345
+ no_bite: bool = False
305
346
 
306
347
  def __bool__(self) -> bool:
307
348
  return self.ok
@@ -790,6 +831,14 @@ class GripperActions:
790
831
  排程由摩擦和读数延迟定。两条都没成立时**如实报 ``ok=False``** 并撤力
791
832
  返回(``reached`` / ``stalled`` 都是 ``False``,``cycles=0``),不放跑。
792
833
 
834
+ 还有一条不算交接:**从起点就没动过**。带设定力的接近段如果停住时离它
835
+ 自己的起点不到 :attr:`MotionConfig.no_bite_mm`(0.5 mm),而且这一段的
836
+ 预算(``force_n × 0.1 × press_safety``)低于
837
+ :attr:`MotionConfig.breakaway_nm`(0.2 Nm,实测脱离力),那它不是顶到
838
+ 工件,而是压根没脱离静摩擦 —— 交过去的话保力段 1.0 倍的力矩正好越过
839
+ 脱离力,夹爪会在自由行程里带着设定力一路走。这一条报 ``no_bite=True``、
840
+ ``cycles=0``、撤力返回,一帧保力都不发(见 :attr:`MotionConfig.no_bite_mm`)。
841
+
793
842
  保力段是纯力矩源,没有位置指令可夹,所以它有自己的一条护栏
794
843
  (:attr:`MotionConfig.hold_runaway_rad`):越出闭合侧标定限位太多就撤力
795
844
  返回,结果里 ``ok=False`` / ``travel_guard=True``。正常夹取不会触发。
@@ -804,8 +853,9 @@ class GripperActions:
804
853
  Returns:
805
854
  :class:`GraspResult`。夹住工件时 ``stalled=True`` 且
806
855
  ``reached=False``(压不到空载目标位置是正常的)。闭合段结束时夹爪
807
- 既没到位也没堵转时 ``ok=False``、``cycles=0`` —— 见上。被松开结束
808
- 时 ``released=True``:正常松开 ``ok=True``,急停 ``ok=False``。
856
+ 既没到位也没堵转时 ``ok=False``、``cycles=0`` —— 见上。接近段没能
857
+ 脱离静摩擦时 ``ok=False``、``no_bite=True``、``cycles=0``。被松开
858
+ 结束时 ``released=True``:正常松开 ``ok=True``,急停 ``ok=False``。
809
859
 
810
860
  Raises:
811
861
  CommandError: ``force_n`` / ``hold_s`` 不是有限数。两条都不是
@@ -854,6 +904,21 @@ class GripperActions:
854
904
  if req is not None:
855
905
  return self._grasp_ends_with_release(req, move, force, cycles=0)
856
906
 
907
+ if move.no_bite:
908
+ # 接近段从起点就没动过:可能是工件就在那里,也可能是设定值的
909
+ # 0.9 倍力矩压不出脱离静摩擦需要的力。两者在电机看来一模一样,
910
+ # 而接手的是纯力矩的保力段(没有位置、没有限速,力矩还比接近段
911
+ # 高一成)—— 猜错的代价是一次带力冲程,猜对(拒夹)的代价只是
912
+ # 一次报失败。所以宁可报失败,也不交接。
913
+ self._release(move.state.position_rad)
914
+ log.warning(
915
+ "夹取未交接:接近段从起点就没能推动夹爪(设定 %.1f N,预算 "
916
+ "%.3f Nm,停在 %.1f mm,目标是闭合端)。保力段是纯力矩源,"
917
+ "交过去会在自由行程里一路加速 —— 撤力返回,不下发保力。",
918
+ force, force * UnitConversion.N_TO_NM * cfg.press_safety,
919
+ move.state.position_mm)
920
+ return self._refused_handover(move, force, no_bite=True)
921
+
857
922
  if not (move.reached or move.stalled):
858
923
  # 既没到位也没顶上东西 —— 夹爪还在自由行程里,而位置环是此刻
859
924
  # 唯一拦着它的东西(kp × 领先 + kd × 速度误差)。保力段的帧里
@@ -865,16 +930,7 @@ class GripperActions:
865
930
  "%+.5f rad,目标 %+.5f rad)—— 它还在自由行程里,而保"
866
931
  "力段没有位置项也没有速度项,交过去会一路加速。撤力返回。",
867
932
  move.state.position_rad, move.target_rad)
868
- return GraspResult(
869
- ok=False,
870
- reached=move.reached,
871
- stalled=move.stalled,
872
- state=move.state,
873
- target_rad=move.target_rad,
874
- force_n=force,
875
- cycles=0,
876
- travel_guard=False,
877
- )
933
+ return self._refused_handover(move, force)
878
934
 
879
935
  # 交接点:带力接近段的终点(夹爪「声明」抓住的位置),不是随后被
880
936
  # 20 N 压实后停下的位置。松开的基准取它,见 _do_release。
@@ -915,6 +971,31 @@ class GripperActions:
915
971
  self._grip_rad = None
916
972
  self._hold_done.set()
917
973
 
974
+ @staticmethod
975
+ def _refused_handover(
976
+ move: MoveResult,
977
+ force: float,
978
+ *,
979
+ no_bite: bool = False,
980
+ ) -> GraspResult:
981
+ """交接被拒时的 :class:`GraspResult`:一帧保力都没发。
982
+
983
+ 两条拒绝路径 —— 接近段从起点就没动过(``no_bite``),和闭合段结束时
984
+ 既没到位也没堵转 —— 结果形状完全一样,只有 ``no_bite`` 不同。放在一处
985
+ 构造,免得将来改了字段只改到一条(见 ``grasp()`` 里的两处调用)。
986
+ """
987
+ return GraspResult(
988
+ ok=False,
989
+ reached=move.reached,
990
+ stalled=move.stalled,
991
+ state=move.state,
992
+ target_rad=move.target_rad,
993
+ force_n=force,
994
+ cycles=0,
995
+ travel_guard=False,
996
+ no_bite=no_bite,
997
+ )
998
+
918
999
  def _grasp_ends_with_release(
919
1000
  self,
920
1001
  req: _ReleaseRequest,
@@ -1529,6 +1610,11 @@ class GripperActions:
1529
1610
  # 整段斜坡都是「不动」。`home()` 紧跟在 `close()` 之后(两个都瞄着闭合
1530
1611
  # 端,只剩一点点齿隙)就是这个形状。压紧路径不受影响:那里目标在限位
1531
1612
  # 外侧,「到了还不动」正是要判的堵转。
1613
+ # 带设定力的接近段里,这一条还留了个小口子:起点落在 ``reach_tol``
1614
+ # (0.02 rad ≈ 0.9 mm)以内时不判堵转,于是 ``no_bite`` 也设不上 ——
1615
+ # 但那时 ``reached`` 为真、夹爪已经在闭合端 0.9 mm 之内,保力段前面
1616
+ # 没有自由行程可跑,交过去最多把最后那点缝隙压到限位上。所以这条口子
1617
+ # 不补,README 说的是「从起点就没动过」不是「任何情况下都不交接」。
1532
1618
  judge_stall = press or dist_mm > cfg.reach_tol * gcfg.rad_to_mm
1533
1619
 
1534
1620
  # 两档领先上限:行进段用 max_lead_mm 破静摩擦,贴近限位后收窄到
@@ -1558,6 +1644,7 @@ class GripperActions:
1558
1644
 
1559
1645
  hist = [before.position_rad]
1560
1646
  stalled = False
1647
+ no_bite = False # 带力接近段从起点就没动过(见上)
1561
1648
  protected = False
1562
1649
  release_requested = False # 松开请求叫停了带力接近段
1563
1650
  over_torque = 0 # 连续过阈的采样点数
@@ -1653,10 +1740,31 @@ class GripperActions:
1653
1740
  if (judge_stall and win_delta is not None
1654
1741
  and (press or in_ramp)
1655
1742
  and win_delta < win_thresh_rad):
1656
- stalled = True
1657
- log.info("堵转:最近 %d 次采样(%.2f s)净位移仅 %.5f rad "
1658
- "(< %.5f),停在 %+.5f rad",
1659
- win, win_s, win_delta, win_thresh_rad, pos)
1743
+ # 「没动」不等于「顶到工件」:带设定力时,从起点起就没挪过位的
1744
+ # 停住也可能是这一段压不出脱离静摩擦的力矩。这一条不能当接触,
1745
+ # 否则交接给纯力矩的保力段就是一次带力冲程(见
1746
+ # ``MotionConfig.no_bite_mm``)。但只有预算本来就在脱离力之下时
1747
+ # 才这么判 —— 预算远高于脱离力还没动,那是真顶上了东西
1748
+ # (见 ``MotionConfig.breakaway_nm``)。
1749
+ if (force_n is not None
1750
+ and force_n * UnitConversion.N_TO_NM * cfg.press_safety
1751
+ < cfg.breakaway_nm
1752
+ and abs(pos - before.position_rad)
1753
+ < cfg.no_bite_mm / gcfg.rad_to_mm):
1754
+ no_bite = True
1755
+ log.warning(
1756
+ "接近段没能脱离静摩擦:预算 %.3f Nm 下,夹爪从 %+.5f rad "
1757
+ "起只挪了 %.2f mm 就停住(目标 %+.5f rad,还差 %.1f mm)。"
1758
+ "「没动」也可能是力矩不够,不是顶到工件 —— 不交接、撤力。",
1759
+ force_n * UnitConversion.N_TO_NM * cfg.press_safety,
1760
+ before.position_rad,
1761
+ abs(pos - before.position_rad) * gcfg.rad_to_mm,
1762
+ target, abs(pos - target) * gcfg.rad_to_mm)
1763
+ else:
1764
+ stalled = True
1765
+ log.info("堵转:最近 %d 次采样(%.2f s)净位移仅 %.5f rad "
1766
+ "(< %.5f),停在 %+.5f rad",
1767
+ win, win_s, win_delta, win_thresh_rad, pos)
1660
1768
  break
1661
1769
 
1662
1770
  # 行进段堵转力矩保护(≈7 N):与位置窗口判据**互补** —— 位置窗口对
@@ -1703,6 +1811,7 @@ class GripperActions:
1703
1811
  steps=last_i,
1704
1812
  protected=protected,
1705
1813
  release_requested=release_requested,
1814
+ no_bite=no_bite,
1706
1815
  )
1707
1816
 
1708
1817
  def _hold_force(
litegrip/gripper.py CHANGED
@@ -1393,7 +1393,12 @@ class LiteGrip:
1393
1393
  it closed onto an object, which is the expected outcome.
1394
1394
  ``released=True`` means the grasp ended because a release was
1395
1395
  requested: ``ok=True`` for a normal release, ``ok=False`` for
1396
- an abort.
1396
+ an abort. ``no_bite=True`` (with ``ok=False``, ``cycles=0``)
1397
+ means the approach never moved the jaws and its torque budget
1398
+ was below the breakaway: the hold was **not** entered, because
1399
+ handing a jaw with a free stroke ahead of it to the torque-only
1400
+ hold would power it across the gap. See
1401
+ ``MotionConfig.no_bite_mm`` and ``.breakaway_nm``.
1397
1402
  """
1398
1403
  self._check_connected()
1399
1404
  return self._actions.grasp(force_n, hold_s, progress=progress)
@@ -1,6 +1,6 @@
1
1
  Metadata-Version: 2.4
2
2
  Name: litegrip-python
3
- Version: 1.2.0
3
+ Version: 1.2.1
4
4
  Summary: Python SDK for the LiteGrip lightweight robotic gripper series
5
5
  Author: NEXFORM ROBOTICS
6
6
  License-Expression: Apache-2.0
@@ -202,7 +202,7 @@ young. Ask both when the difference matters.
202
202
  | `open(speed_mm_s=None, *, progress=None)` → `MoveResult` | Ramps toward the calibrated open-side stop. With `GripperConfig.work_stroke_mm` set it stops at that opening instead — the shipped calibration sets `80.0` against the unit's 85 mm of travel, so a plain `open()` ends 5 mm short of the open end. |
203
203
  | `close(speed_mm_s=None, *, progress=None)` → `MoveResult` | The same, toward the closed side. `work_stroke_mm` is an open-side number and does not change where a close ends. |
204
204
  | `home()` → `MoveResult` | Ramps to the calibrated closed position. |
205
- | `grasp(force_n=None, hold_s=0.0, *, progress=None)` → `GraspResult` | Closes onto the object — or onto the closed-side calibrated stop if there is nothing there — then ramps to and holds `force_n` N. The closing leg carries `force_n` as its torque budget, so meeting the object presses no harder than the setpoint. The hold takes over only once the jaw is stopped: it is `stalled=True` (something is between the jaws) or `reached=True` (the jaws closed empty). `hold_s=0` holds until a fault, the runaway watch, Ctrl+C, or a `release()` / `request_release()` from another thread — which ends the grasp with `released=True`. `force_n=None` uses `MotionConfig.force_n` (20 N). |
205
+ | `grasp(force_n=None, hold_s=0.0, *, progress=None)` → `GraspResult` | Closes onto the object — or onto the closed-side calibrated stop if there is nothing there — then ramps to and holds `force_n` N. The closing leg carries `force_n` as its torque budget, so meeting the object presses no harder than the setpoint. The hold takes over only once the jaw is stopped: it is `stalled=True` (something is between the jaws) or `reached=True` (the jaws closed empty). A stop that came **without the jaw ever moving from where the approach began**, with a budget below `MotionConfig.breakaway_nm`, is not treated as contact — the budget simply cannot break static friction — so the call releases in place and returns `no_bite=True` instead of handing over the hold. `hold_s=0` holds until a fault, the runaway watch, Ctrl+C, or a `release()` / `request_release()` from another thread — which ends the grasp with `released=True`. `force_n=None` uses `MotionConfig.force_n` (20 N). |
206
206
  | `release(clearance_mm=10.0, *, abort=False, timeout_s=None)` → `ReleaseResult` | Ends an in-progress `grasp()` and opens the jaws from the pose where the grip was declared, by `clearance_mm` more, clamped to the calibrated open stop. Safe to call from any thread while `grasp(hold_s=0)` is blocked in another: it queues the request, the grasp thread performs the opening, and the call returns that outcome. With no grasp running it opens from the current position in the calling thread. `abort=True` is the E-stop form: torque off, no opening move, `ok=False`. A second call during the same grasp joins the first. |
207
207
  | `request_release(clearance_mm=10.0, *, abort=False)` → `bool` | Non-blocking form of `release()`: records the request if a grasp is running and returns `True`, else `False`. Never sends a frame, so it is safe for a UI thread, a signal handler or an E-stop callback. The grasp thread acts on it before its next frame (within 5 ms). |
208
208
  | `goto(position_mm, kp=None, kd=None, duration=0.5)` → `MoveResult` | Ramp to a position in millimetres. |
@@ -387,8 +387,8 @@ What it *means*, and what to check, is per action:
387
387
 
388
388
  | Type | Fields | `bool()` is |
389
389
  | --- | --- | --- |
390
- | `MoveResult` | `ok`, `reached`, `stalled`, `state`, `target_rad`, `limit_rad`, `final_cmd_rad`, `steps`, `protected`, `released` | `ok` |
391
- | `GraspResult` | `ok`, `reached`, `stalled`, `state`, `target_rad`, `force_n`, `cycles`, `travel_guard`, `released` | `ok` |
390
+ | `MoveResult` | `ok`, `reached`, `stalled`, `state`, `target_rad`, `limit_rad`, `final_cmd_rad`, `steps`, `protected`, `released`, `no_bite` | `ok` |
391
+ | `GraspResult` | `ok`, `reached`, `stalled`, `state`, `target_rad`, `force_n`, `cycles`, `travel_guard`, `released`, `no_bite` | `ok` |
392
392
  | `ReleaseResult` | `ok`, `state`, `opened_mm`, `target_rad`, `aborted` | `ok` |
393
393
  | `EnableResult` | `ok`, `state`, `tries` | `ok` |
394
394
 
@@ -414,6 +414,25 @@ A fourth combination is a failure, and new in this version:
414
414
  `cycles=0`. Nothing was gripped. If you see this, the closing leg is being starved — a stale
415
415
  state read, or friction the mechanism's own budget cannot overcome.
416
416
 
417
+ A fifth is a refusal:
418
+
419
+ - **`grasp()` with `ok=False, no_bite=True`** means the approach carried its force but never moved
420
+ the jaws: it stopped within `MotionConfig.no_bite_mm` (0.5 mm) of where it started *and* its
421
+ budget (`force_n × 0.1 × press_safety`) was below `MotionConfig.breakaway_nm` (0.2 N·m on this
422
+ unit, so setpoints up to 2.2 N). That is not contact — it is a budget that cannot break static
423
+ friction — and it is exactly the case where handing over the hold would send a jaw with a free
424
+ stroke ahead of it into the torque-only frames and let it accelerate. So the hold is never
425
+ entered, the call releases in place, and `cycles` is 0. `stalled` and `reached` are both `False`
426
+ on this path. The remedy is a setpoint above the breakaway (~2.5 N here), not a longer hold.
427
+ Above the breakaway a zero-displacement stop *is* contact and is held normally: a part already
428
+ against the open jaw, or a re-grasp in place after `release(abort=True)`, still grips.
429
+
430
+ Two edges worth knowing. An approach that starts within `reach_tol` (0.9 mm) of the closed stop
431
+ gets no stall verdict at all — it reports `reached` instead, and the hold has nothing to run
432
+ because the jaws are already on the end stop. And the refusal is about the budget, not the part:
433
+ if a grippy part sits at the start pose *and* the setpoint is below the breakaway, the grasp is
434
+ refused rather than risked.
435
+
417
436
  - **`grasp()` ended by a release** returns `released=True`: `ok=True` when the opening completed,
418
437
  `ok=False` when it was an E-stop (`release(abort=True)`), which sends no opening move. `reached`
419
438
  and `stalled` still describe the closing leg; `state` is the pose after the release.
@@ -475,6 +494,8 @@ with LiteGrip("can0") as gripper:
475
494
  | `max_lead_mm` | `4.0` | cap on how far the command may lead the measured position, on moves that carry no force setpoint |
476
495
  | `stop_lead_mm` | `0.7` | the same cap on the approach to a stop, so the pressing torque stays bounded |
477
496
  | `press_safety` | `0.9` | fraction of the setpoint a force-carrying approach may spend |
497
+ | `no_bite_mm` | `0.5` | a force-carrying approach that stops this close to its start pose is refused, not read as contact (see `grasp()` above) |
498
+ | `breakaway_nm` | `0.2` | measured static-friction breakaway; only a budget below it makes a zero-displacement stop a refusal rather than contact |
478
499
  | `reach_tol` | `0.02` | position tolerance for `reached`, radians |
479
500
  | `stop_tol` | `0.03` | how close to the calibrated stop the jaw must park to count as pressed home |
480
501
  | `settle_s` | `0.3` | time spent holding the target after the ramp |
@@ -1,11 +1,11 @@
1
1
  litegrip/__init__.py,sha256=1emjAg7k1jLYsmFWVAg7r6jfJV6eZViYDnyRMcofCNM,9386
2
- litegrip/actions.py,sha256=auXmndmdnZ8UlwQD920t8GwmYrZlG5ewWG8ev-SJoQw,102100
2
+ litegrip/actions.py,sha256=hYWjI_ww9KENPpGQbW72x5CTNVg7lisgscXaF3ZbK6M,110188
3
3
  litegrip/calibration_normal.json,sha256=rL9XGWD-aATZWUqE3MSXuQ2wR_Oz1L0EF78kJgQpnd0,209
4
4
  litegrip/calibration_reverse.json,sha256=HVweCi6LVBy7QQGxHa5NeaJfoOAfnzPMmVtXXIiCE74,209
5
5
  litegrip/constants.py,sha256=A1-gt-bEk4xsX00LJtE-0uQQu-Brz8LRIJOAVQfBpfg,6660
6
6
  litegrip/exceptions.py,sha256=2fQtANhxat0lVbhhU_SD-6nTcA4r-NLCpfmd06TGe3U,1144
7
7
  litegrip/factory_calibration.json,sha256=j4kbECLTXRPyfrApraDm2PlNRa1w7mnuhO6sQVQXSxU,345
8
- litegrip/gripper.py,sha256=EQzTB8ygmeMqVFP3SBU_pKcPn9N15SbYv63zmyLX_Zg,123795
8
+ litegrip/gripper.py,sha256=9bKLrE0Xk2jFj7q4vTTo8-KQ1XZje8vcHTqgIRQhidg,124188
9
9
  litegrip/models.py,sha256=oS36QK78uiDQFEydupfHMjIk02je75SFC6hvfW2abtM,7669
10
10
  litegrip/py.typed,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
11
11
  litegrip/teleop.py,sha256=1a0MUvpjMaHhjcTO9_T8OHzG-r-zlHGuk54OTMUJAbg,71719
@@ -18,8 +18,8 @@ litegrip/can/protocol.py,sha256=dt69WYOtVGSlmNv_Vxszt4YLkazUvl4dWs4S75wgZqg,1195
18
18
  litegrip/can/transport.py,sha256=4-0XjPpguEaFVMVHsD5iLBTjgKN8Cb-X1MYTZJkvhPE,14188
19
19
  litegrip/protocols/__init__.py,sha256=aregvFK6W76DGGrKCS1tccWsqWWCFBROXZPQ9CcPI1k,304
20
20
  litegrip/protocols/can_bus.py,sha256=UhGhVMrgQ--hC-hZNvPscrT2sjdMX3rgspOdCeKXAnY,26383
21
- litegrip_python-1.2.0.dist-info/licenses/LICENSE,sha256=yVuuHRzgI17MzTVgt3LsHvuX80innw--CmNPDCzO_iw,11358
22
- litegrip_python-1.2.0.dist-info/METADATA,sha256=uWOXBHS15P2Wgz4JKAfozOqvPiClQ31dykNg-dMlMSc,43779
23
- litegrip_python-1.2.0.dist-info/WHEEL,sha256=mOdXR9C3wMVov7cSY8PY-XCzo3SmmWCHvGQr5csJoao,91
24
- litegrip_python-1.2.0.dist-info/top_level.txt,sha256=P4onDW9LkBEwiiQw4u1ui2fZSjQ4_XL5RZeCUh7RGoE,9
25
- litegrip_python-1.2.0.dist-info/RECORD,,
21
+ litegrip_python-1.2.1.dist-info/licenses/LICENSE,sha256=yVuuHRzgI17MzTVgt3LsHvuX80innw--CmNPDCzO_iw,11358
22
+ litegrip_python-1.2.1.dist-info/METADATA,sha256=u1QzJS1JSDBwjSbCgvKQm4UO5s_QXi7bprnn1iP5ZYg,45800
23
+ litegrip_python-1.2.1.dist-info/WHEEL,sha256=mOdXR9C3wMVov7cSY8PY-XCzo3SmmWCHvGQr5csJoao,91
24
+ litegrip_python-1.2.1.dist-info/top_level.txt,sha256=P4onDW9LkBEwiiQw4u1ui2fZSjQ4_XL5RZeCUh7RGoE,9
25
+ litegrip_python-1.2.1.dist-info/RECORD,,