jaclang 0.7.34__py3-none-any.whl → 0.8.0__py3-none-any.whl

jaclang/vendor/mypy/typeshed/stdlib/tkinter/__init__.pyi

@@ -1,3654 +0,0 @@
-import _tkinter
-import sys
-from _typeshed import Incomplete, StrEnum, StrOrBytesPath
-from collections.abc import Callable, Mapping, Sequence
-from tkinter.constants import *
-from tkinter.font import _FontDescription
-from types import TracebackType
-from typing import Any, Generic, Literal, NamedTuple, TypedDict, TypeVar, overload, type_check_only
-from typing_extensions import TypeAlias, TypeVarTuple, Unpack, deprecated
-
-if sys.version_info >= (3, 9):
-    __all__ = [
-        "TclError",
-        "NO",
-        "FALSE",
-        "OFF",
-        "YES",
-        "TRUE",
-        "ON",
-        "N",
-        "S",
-        "W",
-        "E",
-        "NW",
-        "SW",
-        "NE",
-        "SE",
-        "NS",
-        "EW",
-        "NSEW",
-        "CENTER",
-        "NONE",
-        "X",
-        "Y",
-        "BOTH",
-        "LEFT",
-        "TOP",
-        "RIGHT",
-        "BOTTOM",
-        "RAISED",
-        "SUNKEN",
-        "FLAT",
-        "RIDGE",
-        "GROOVE",
-        "SOLID",
-        "HORIZONTAL",
-        "VERTICAL",
-        "NUMERIC",
-        "CHAR",
-        "WORD",
-        "BASELINE",
-        "INSIDE",
-        "OUTSIDE",
-        "SEL",
-        "SEL_FIRST",
-        "SEL_LAST",
-        "END",
-        "INSERT",
-        "CURRENT",
-        "ANCHOR",
-        "ALL",
-        "NORMAL",
-        "DISABLED",
-        "ACTIVE",
-        "HIDDEN",
-        "CASCADE",
-        "CHECKBUTTON",
-        "COMMAND",
-        "RADIOBUTTON",
-        "SEPARATOR",
-        "SINGLE",
-        "BROWSE",
-        "MULTIPLE",
-        "EXTENDED",
-        "DOTBOX",
-        "UNDERLINE",
-        "PIESLICE",
-        "CHORD",
-        "ARC",
-        "FIRST",
-        "LAST",
-        "BUTT",
-        "PROJECTING",
-        "ROUND",
-        "BEVEL",
-        "MITER",
-        "MOVETO",
-        "SCROLL",
-        "UNITS",
-        "PAGES",
-        "TkVersion",
-        "TclVersion",
-        "READABLE",
-        "WRITABLE",
-        "EXCEPTION",
-        "EventType",
-        "Event",
-        "NoDefaultRoot",
-        "Variable",
-        "StringVar",
-        "IntVar",
-        "DoubleVar",
-        "BooleanVar",
-        "mainloop",
-        "getint",
-        "getdouble",
-        "getboolean",
-        "Misc",
-        "CallWrapper",
-        "XView",
-        "YView",
-        "Wm",
-        "Tk",
-        "Tcl",
-        "Pack",
-        "Place",
-        "Grid",
-        "BaseWidget",
-        "Widget",
-        "Toplevel",
-        "Button",
-        "Canvas",
-        "Checkbutton",
-        "Entry",
-        "Frame",
-        "Label",
-        "Listbox",
-        "Menu",
-        "Menubutton",
-        "Message",
-        "Radiobutton",
-        "Scale",
-        "Scrollbar",
-        "Text",
-        "OptionMenu",
-        "Image",
-        "PhotoImage",
-        "BitmapImage",
-        "image_names",
-        "image_types",
-        "Spinbox",
-        "LabelFrame",
-        "PanedWindow",
-    ]
-
-# Using anything from tkinter.font in this file means that 'import tkinter'
-# seems to also load tkinter.font. That's not how it actually works, but
-# unfortunately not much can be done about it. https://github.com/python/typeshed/pull/4346
-
-TclError = _tkinter.TclError
-wantobjects: int
-TkVersion: float
-TclVersion: float
-READABLE = _tkinter.READABLE
-WRITABLE = _tkinter.WRITABLE
-EXCEPTION = _tkinter.EXCEPTION
-
-# Quick guide for figuring out which widget class to choose:
-#   - Misc: any widget (don't use BaseWidget because Tk doesn't inherit from BaseWidget)
-#   - Widget: anything that is meant to be put into another widget with e.g. pack or grid
-#
-# Don't trust tkinter's docstrings, because they have been created by copy/pasting from
-# Tk's manual pages more than 10 years ago. Use the latest manual pages instead:
-#
-#    $ sudo apt install tk-doc tcl-doc
-#    $ man 3tk label        # tkinter.Label
-#    $ man 3tk ttk_label    # tkinter.ttk.Label
-#    $ man 3tcl after       # tkinter.Misc.after
-#
-# You can also read the manual pages online: https://www.tcl.tk/doc/
-
-# Some widgets have an option named -compound that accepts different values
-# than the _Compound defined here. Many other options have similar things.
-_Anchor: TypeAlias = Literal["nw", "n", "ne", "w", "center", "e", "sw", "s", "se"]  # manual page: Tk_GetAnchor
-_ButtonCommand: TypeAlias = str | Callable[[], Any]  # accepts string of tcl code, return value is returned from Button.invoke()
-_Compound: TypeAlias = Literal["top", "left", "center", "right", "bottom", "none"]  # -compound in manual page named 'options'
-# manual page: Tk_GetCursor
-_Cursor: TypeAlias = str | tuple[str] | tuple[str, str] | tuple[str, str, str] | tuple[str, str, str, str]
-# example when it's sequence:  entry['invalidcommand'] = [entry.register(print), '%P']
-_EntryValidateCommand: TypeAlias = str | list[str] | tuple[str, ...] | Callable[[], bool]
-_ImageSpec: TypeAlias = _Image | str  # str can be from e.g. tkinter.image_names()
-_Relief: TypeAlias = Literal["raised", "sunken", "flat", "ridge", "solid", "groove"]  # manual page: Tk_GetRelief
-_ScreenUnits: TypeAlias = str | float  # Often the right type instead of int. Manual page: Tk_GetPixels
-# -xscrollcommand and -yscrollcommand in 'options' manual page
-_XYScrollCommand: TypeAlias = str | Callable[[float, float], object]
-_TakeFocusValue: TypeAlias = bool | Literal[0, 1, ""] | Callable[[str], bool | None]  # -takefocus in manual page named 'options'
-
-if sys.version_info >= (3, 11):
-    class _VersionInfoType(NamedTuple):
-        major: int
-        minor: int
-        micro: int
-        releaselevel: str
-        serial: int
-
-class EventType(StrEnum):
-    Activate: str
-    ButtonPress: str
-    Button = ButtonPress
-    ButtonRelease: str
-    Circulate: str
-    CirculateRequest: str
-    ClientMessage: str
-    Colormap: str
-    Configure: str
-    ConfigureRequest: str
-    Create: str
-    Deactivate: str
-    Destroy: str
-    Enter: str
-    Expose: str
-    FocusIn: str
-    FocusOut: str
-    GraphicsExpose: str
-    Gravity: str
-    KeyPress: str
-    Key = KeyPress
-    KeyRelease: str
-    Keymap: str
-    Leave: str
-    Map: str
-    MapRequest: str
-    Mapping: str
-    Motion: str
-    MouseWheel: str
-    NoExpose: str
-    Property: str
-    Reparent: str
-    ResizeRequest: str
-    Selection: str
-    SelectionClear: str
-    SelectionRequest: str
-    Unmap: str
-    VirtualEvent: str
-    Visibility: str
-
-_W = TypeVar("_W", bound=Misc)
-# Events considered covariant because you should never assign to event.widget.
-_W_co = TypeVar("_W_co", covariant=True, bound=Misc)
-
-class Event(Generic[_W_co]):
-    serial: int
-    num: int
-    focus: bool
-    height: int
-    width: int
-    keycode: int
-    state: int | str
-    time: int
-    x: int
-    y: int
-    x_root: int
-    y_root: int
-    char: str
-    send_event: bool
-    keysym: str
-    keysym_num: int
-    type: EventType
-    widget: _W_co
-    delta: int
-
-def NoDefaultRoot() -> None: ...
-
-class Variable:
-    def __init__(self, master: Misc | None = None, value: Incomplete | None = None, name: str | None = None) -> None: ...
-    def set(self, value) -> None: ...
-    initialize = set
-    def get(self): ...
-    def trace_add(self, mode: Literal["array", "read", "write", "unset"], callback: Callable[[str, str, str], object]) -> str: ...
-    def trace_remove(self, mode: Literal["array", "read", "write", "unset"], cbname: str) -> None: ...
-    def trace_info(self) -> list[tuple[tuple[Literal["array", "read", "write", "unset"], ...], str]]: ...
-    @deprecated("use trace_add() instead of trace()")
-    def trace(self, mode, callback): ...
-    @deprecated("use trace_add() instead of trace_variable()")
-    def trace_variable(self, mode, callback): ...
-    @deprecated("use trace_remove() instead of trace_vdelete()")
-    def trace_vdelete(self, mode, cbname) -> None: ...
-    @deprecated("use trace_info() instead of trace_vinfo()")
-    def trace_vinfo(self): ...
-    def __eq__(self, other: object) -> bool: ...
-    def __del__(self) -> None: ...
-
-class StringVar(Variable):
-    def __init__(self, master: Misc | None = None, value: str | None = None, name: str | None = None) -> None: ...
-    def set(self, value: str) -> None: ...
-    initialize = set
-    def get(self) -> str: ...
-
-class IntVar(Variable):
-    def __init__(self, master: Misc | None = None, value: int | None = None, name: str | None = None) -> None: ...
-    def set(self, value: int) -> None: ...
-    initialize = set
-    def get(self) -> int: ...
-
-class DoubleVar(Variable):
-    def __init__(self, master: Misc | None = None, value: float | None = None, name: str | None = None) -> None: ...
-    def set(self, value: float) -> None: ...
-    initialize = set
-    def get(self) -> float: ...
-
-class BooleanVar(Variable):
-    def __init__(self, master: Misc | None = None, value: bool | None = None, name: str | None = None) -> None: ...
-    def set(self, value: bool) -> None: ...
-    initialize = set
-    def get(self) -> bool: ...
-
-def mainloop(n: int = 0) -> None: ...
-
-getint: Incomplete
-getdouble: Incomplete
-
-def getboolean(s): ...
-
-_Ts = TypeVarTuple("_Ts")
-
-class _GridIndexInfo(TypedDict, total=False):
-    minsize: _ScreenUnits
-    pad: _ScreenUnits
-    uniform: str | None
-    weight: int
-
-class Misc:
-    master: Misc | None
-    tk: _tkinter.TkappType
-    children: dict[str, Widget]
-    def destroy(self) -> None: ...
-    def deletecommand(self, name: str) -> None: ...
-    def tk_strictMotif(self, boolean: Incomplete | None = None): ...
-    def tk_bisque(self) -> None: ...
-    def tk_setPalette(self, *args, **kw) -> None: ...
-    def wait_variable(self, name: str | Variable = "PY_VAR") -> None: ...
-    waitvar = wait_variable
-    def wait_window(self, window: Misc | None = None) -> None: ...
-    def wait_visibility(self, window: Misc | None = None) -> None: ...
-    def setvar(self, name: str = "PY_VAR", value: str = "1") -> None: ...
-    def getvar(self, name: str = "PY_VAR"): ...
-    def getint(self, s): ...
-    def getdouble(self, s): ...
-    def getboolean(self, s): ...
-    def focus_set(self) -> None: ...
-    focus = focus_set
-    def focus_force(self) -> None: ...
-    def focus_get(self) -> Misc | None: ...
-    def focus_displayof(self) -> Misc | None: ...
-    def focus_lastfor(self) -> Misc | None: ...
-    def tk_focusFollowsMouse(self) -> None: ...
-    def tk_focusNext(self) -> Misc | None: ...
-    def tk_focusPrev(self) -> Misc | None: ...
-    # .after() can be called without the "func" argument, but it is basically never what you want.
-    # It behaves like time.sleep() and freezes the GUI app.
-    def after(self, ms: int | Literal["idle"], func: Callable[[Unpack[_Ts]], object], *args: Unpack[_Ts]) -> str: ...
-    # after_idle is essentially partialmethod(after, "idle")
-    def after_idle(self, func: Callable[[Unpack[_Ts]], object], *args: Unpack[_Ts]) -> str: ...
-    def after_cancel(self, id: str) -> None: ...
-    def bell(self, displayof: Literal[0] | Misc | None = 0) -> None: ...
-    def clipboard_get(self, *, displayof: Misc = ..., type: str = ...) -> str: ...
-    def clipboard_clear(self, *, displayof: Misc = ...) -> None: ...
-    def clipboard_append(self, string: str, *, displayof: Misc = ..., format: str = ..., type: str = ...) -> None: ...
-    def grab_current(self): ...
-    def grab_release(self) -> None: ...
-    def grab_set(self) -> None: ...
-    def grab_set_global(self) -> None: ...
-    def grab_status(self) -> Literal["local", "global"] | None: ...
-    def option_add(
-        self, pattern, value, priority: int | Literal["widgetDefault", "startupFile", "userDefault", "interactive"] | None = None
-    ) -> None: ...
-    def option_clear(self) -> None: ...
-    def option_get(self, name, className): ...
-    def option_readfile(self, fileName, priority: Incomplete | None = None) -> None: ...
-    def selection_clear(self, **kw) -> None: ...
-    def selection_get(self, **kw): ...
-    def selection_handle(self, command, **kw) -> None: ...
-    def selection_own(self, **kw) -> None: ...
-    def selection_own_get(self, **kw): ...
-    def send(self, interp, cmd, *args): ...
-    def lower(self, belowThis: Incomplete | None = None) -> None: ...
-    def tkraise(self, aboveThis: Incomplete | None = None) -> None: ...
-    lift = tkraise
-    if sys.version_info >= (3, 11):
-        def info_patchlevel(self) -> _VersionInfoType: ...
-
-    def winfo_atom(self, name: str, displayof: Literal[0] | Misc | None = 0) -> int: ...
-    def winfo_atomname(self, id: int, displayof: Literal[0] | Misc | None = 0) -> str: ...
-    def winfo_cells(self) -> int: ...
-    def winfo_children(self) -> list[Widget]: ...  # Widget because it can't be Toplevel or Tk
-    def winfo_class(self) -> str: ...
-    def winfo_colormapfull(self) -> bool: ...
-    def winfo_containing(self, rootX: int, rootY: int, displayof: Literal[0] | Misc | None = 0) -> Misc | None: ...
-    def winfo_depth(self) -> int: ...
-    def winfo_exists(self) -> bool: ...
-    def winfo_fpixels(self, number: _ScreenUnits) -> float: ...
-    def winfo_geometry(self) -> str: ...
-    def winfo_height(self) -> int: ...
-    def winfo_id(self) -> int: ...
-    def winfo_interps(self, displayof: Literal[0] | Misc | None = 0) -> tuple[str, ...]: ...
-    def winfo_ismapped(self) -> bool: ...
-    def winfo_manager(self) -> str: ...
-    def winfo_name(self) -> str: ...
-    def winfo_parent(self) -> str: ...  # return value needs nametowidget()
-    def winfo_pathname(self, id: int, displayof: Literal[0] | Misc | None = 0): ...
-    def winfo_pixels(self, number: _ScreenUnits) -> int: ...
-    def winfo_pointerx(self) -> int: ...
-    def winfo_pointerxy(self) -> tuple[int, int]: ...
-    def winfo_pointery(self) -> int: ...
-    def winfo_reqheight(self) -> int: ...
-    def winfo_reqwidth(self) -> int: ...
-    def winfo_rgb(self, color: str) -> tuple[int, int, int]: ...
-    def winfo_rootx(self) -> int: ...
-    def winfo_rooty(self) -> int: ...
-    def winfo_screen(self) -> str: ...
-    def winfo_screencells(self) -> int: ...
-    def winfo_screendepth(self) -> int: ...
-    def winfo_screenheight(self) -> int: ...
-    def winfo_screenmmheight(self) -> int: ...
-    def winfo_screenmmwidth(self) -> int: ...
-    def winfo_screenvisual(self) -> str: ...
-    def winfo_screenwidth(self) -> int: ...
-    def winfo_server(self) -> str: ...
-    def winfo_toplevel(self) -> Tk | Toplevel: ...
-    def winfo_viewable(self) -> bool: ...
-    def winfo_visual(self) -> str: ...
-    def winfo_visualid(self) -> str: ...
-    def winfo_visualsavailable(self, includeids: bool = False) -> list[tuple[str, int]]: ...
-    def winfo_vrootheight(self) -> int: ...
-    def winfo_vrootwidth(self) -> int: ...
-    def winfo_vrootx(self) -> int: ...
-    def winfo_vrooty(self) -> int: ...
-    def winfo_width(self) -> int: ...
-    def winfo_x(self) -> int: ...
-    def winfo_y(self) -> int: ...
-    def update(self) -> None: ...
-    def update_idletasks(self) -> None: ...
-    @overload
-    def bindtags(self, tagList: None = None) -> tuple[str, ...]: ...
-    @overload
-    def bindtags(self, tagList: list[str] | tuple[str, ...]) -> None: ...
-    # bind with isinstance(func, str) doesn't return anything, but all other
-    # binds do. The default value of func is not str.
-    @overload
-    def bind(
-        self,
-        sequence: str | None = None,
-        func: Callable[[Event[Misc]], object] | None = None,
-        add: Literal["", "+"] | bool | None = None,
-    ) -> str: ...
-    @overload
-    def bind(self, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    @overload
-    def bind(self, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    # There's no way to know what type of widget bind_all and bind_class
-    # callbacks will get, so those are Misc.
-    @overload
-    def bind_all(
-        self,
-        sequence: str | None = None,
-        func: Callable[[Event[Misc]], object] | None = None,
-        add: Literal["", "+"] | bool | None = None,
-    ) -> str: ...
-    @overload
-    def bind_all(self, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    @overload
-    def bind_all(self, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    @overload
-    def bind_class(
-        self,
-        className: str,
-        sequence: str | None = None,
-        func: Callable[[Event[Misc]], object] | None = None,
-        add: Literal["", "+"] | bool | None = None,
-    ) -> str: ...
-    @overload
-    def bind_class(self, className: str, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    @overload
-    def bind_class(self, className: str, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    def unbind(self, sequence: str, funcid: str | None = None) -> None: ...
-    def unbind_all(self, sequence: str) -> None: ...
-    def unbind_class(self, className: str, sequence: str) -> None: ...
-    def mainloop(self, n: int = 0) -> None: ...
-    def quit(self) -> None: ...
-    @property
-    def _windowingsystem(self) -> Literal["win32", "aqua", "x11"]: ...
-    def nametowidget(self, name: str | Misc | _tkinter.Tcl_Obj) -> Any: ...
-    def register(
-        self, func: Callable[..., object], subst: Callable[..., Sequence[Any]] | None = None, needcleanup: int = 1
-    ) -> str: ...
-    def keys(self) -> list[str]: ...
-    @overload
-    def pack_propagate(self, flag: bool) -> bool | None: ...
-    @overload
-    def pack_propagate(self) -> None: ...
-    propagate = pack_propagate
-    def grid_anchor(self, anchor: _Anchor | None = None) -> None: ...
-    anchor = grid_anchor
-    @overload
-    def grid_bbox(
-        self, column: None = None, row: None = None, col2: None = None, row2: None = None
-    ) -> tuple[int, int, int, int] | None: ...
-    @overload
-    def grid_bbox(self, column: int, row: int, col2: None = None, row2: None = None) -> tuple[int, int, int, int] | None: ...
-    @overload
-    def grid_bbox(self, column: int, row: int, col2: int, row2: int) -> tuple[int, int, int, int] | None: ...
-    bbox = grid_bbox
-    def grid_columnconfigure(
-        self,
-        index: int | str | list[int] | tuple[int, ...],
-        cnf: _GridIndexInfo = {},
-        *,
-        minsize: _ScreenUnits = ...,
-        pad: _ScreenUnits = ...,
-        uniform: str = ...,
-        weight: int = ...,
-    ) -> _GridIndexInfo | Any: ...  # can be None but annoying to check
-    def grid_rowconfigure(
-        self,
-        index: int | str | list[int] | tuple[int, ...],
-        cnf: _GridIndexInfo = {},
-        *,
-        minsize: _ScreenUnits = ...,
-        pad: _ScreenUnits = ...,
-        uniform: str = ...,
-        weight: int = ...,
-    ) -> _GridIndexInfo | Any: ...  # can be None but annoying to check
-    columnconfigure = grid_columnconfigure
-    rowconfigure = grid_rowconfigure
-    def grid_location(self, x: _ScreenUnits, y: _ScreenUnits) -> tuple[int, int]: ...
-    @overload
-    def grid_propagate(self, flag: bool) -> None: ...
-    @overload
-    def grid_propagate(self) -> bool: ...
-    def grid_size(self) -> tuple[int, int]: ...
-    size = grid_size
-    # Widget because Toplevel or Tk is never a slave
-    def pack_slaves(self) -> list[Widget]: ...
-    def grid_slaves(self, row: int | None = None, column: int | None = None) -> list[Widget]: ...
-    def place_slaves(self) -> list[Widget]: ...
-    slaves = pack_slaves
-    def event_add(self, virtual: str, *sequences: str) -> None: ...
-    def event_delete(self, virtual: str, *sequences: str) -> None: ...
-    def event_generate(
-        self,
-        sequence: str,
-        *,
-        above: Misc | int = ...,
-        borderwidth: _ScreenUnits = ...,
-        button: int = ...,
-        count: int = ...,
-        data: Any = ...,  # anything with usable str() value
-        delta: int = ...,
-        detail: str = ...,
-        focus: bool = ...,
-        height: _ScreenUnits = ...,
-        keycode: int = ...,
-        keysym: str = ...,
-        mode: str = ...,
-        override: bool = ...,
-        place: Literal["PlaceOnTop", "PlaceOnBottom"] = ...,
-        root: Misc | int = ...,
-        rootx: _ScreenUnits = ...,
-        rooty: _ScreenUnits = ...,
-        sendevent: bool = ...,
-        serial: int = ...,
-        state: int | str = ...,
-        subwindow: Misc | int = ...,
-        time: int = ...,
-        warp: bool = ...,
-        width: _ScreenUnits = ...,
-        when: Literal["now", "tail", "head", "mark"] = ...,
-        x: _ScreenUnits = ...,
-        y: _ScreenUnits = ...,
-    ) -> None: ...
-    def event_info(self, virtual: str | None = None) -> tuple[str, ...]: ...
-    def image_names(self) -> tuple[str, ...]: ...
-    def image_types(self) -> tuple[str, ...]: ...
-    # See #4363 and #4891
-    def __setitem__(self, key: str, value: Any) -> None: ...
-    def __getitem__(self, key: str) -> Any: ...
-    def cget(self, key: str) -> Any: ...
-    def configure(self, cnf: Any = None) -> Any: ...
-    # TODO: config is an alias of configure, but adding that here creates lots of mypy errors
-
-class CallWrapper:
-    func: Incomplete
-    subst: Incomplete
-    widget: Incomplete
-    def __init__(self, func, subst, widget) -> None: ...
-    def __call__(self, *args): ...
-
-class XView:
-    @overload
-    def xview(self) -> tuple[float, float]: ...
-    @overload
-    def xview(self, *args): ...
-    def xview_moveto(self, fraction: float) -> None: ...
-    @overload
-    def xview_scroll(self, number: int, what: Literal["units", "pages"]) -> None: ...
-    @overload
-    def xview_scroll(self, number: _ScreenUnits, what: Literal["pixels"]) -> None: ...
-
-class YView:
-    @overload
-    def yview(self) -> tuple[float, float]: ...
-    @overload
-    def yview(self, *args): ...
-    def yview_moveto(self, fraction: float) -> None: ...
-    @overload
-    def yview_scroll(self, number: int, what: Literal["units", "pages"]) -> None: ...
-    @overload
-    def yview_scroll(self, number: _ScreenUnits, what: Literal["pixels"]) -> None: ...
-
-class Wm:
-    @overload
-    def wm_aspect(self, minNumer: int, minDenom: int, maxNumer: int, maxDenom: int) -> None: ...
-    @overload
-    def wm_aspect(
-        self, minNumer: None = None, minDenom: None = None, maxNumer: None = None, maxDenom: None = None
-    ) -> tuple[int, int, int, int] | None: ...
-    aspect = wm_aspect
-    @overload
-    def wm_attributes(self) -> tuple[Any, ...]: ...
-    @overload
-    def wm_attributes(self, option: str, /): ...
-    @overload
-    def wm_attributes(self, option: str, value, /, *__other_option_value_pairs: Any) -> None: ...
-    attributes = wm_attributes
-    def wm_client(self, name: str | None = None) -> str: ...
-    client = wm_client
-    @overload
-    def wm_colormapwindows(self) -> list[Misc]: ...
-    @overload
-    def wm_colormapwindows(self, wlist: list[Misc] | tuple[Misc, ...], /) -> None: ...
-    @overload
-    def wm_colormapwindows(self, first_wlist_item: Misc, /, *other_wlist_items: Misc) -> None: ...
-    colormapwindows = wm_colormapwindows
-    def wm_command(self, value: str | None = None) -> str: ...
-    command = wm_command
-    # Some of these always return empty string, but return type is set to None to prevent accidentally using it
-    def wm_deiconify(self) -> None: ...
-    deiconify = wm_deiconify
-    def wm_focusmodel(self, model: Literal["active", "passive"] | None = None) -> Literal["active", "passive", ""]: ...
-    focusmodel = wm_focusmodel
-    def wm_forget(self, window: Wm) -> None: ...
-    forget = wm_forget
-    def wm_frame(self) -> str: ...
-    frame = wm_frame
-    @overload
-    def wm_geometry(self, newGeometry: None = None) -> str: ...
-    @overload
-    def wm_geometry(self, newGeometry: str) -> None: ...
-    geometry = wm_geometry
-    def wm_grid(
-        self,
-        baseWidth: Incomplete | None = None,
-        baseHeight: Incomplete | None = None,
-        widthInc: Incomplete | None = None,
-        heightInc: Incomplete | None = None,
-    ): ...
-    grid = wm_grid
-    def wm_group(self, pathName: Incomplete | None = None): ...
-    group = wm_group
-    def wm_iconbitmap(self, bitmap: Incomplete | None = None, default: Incomplete | None = None): ...
-    iconbitmap = wm_iconbitmap
-    def wm_iconify(self) -> None: ...
-    iconify = wm_iconify
-    def wm_iconmask(self, bitmap: Incomplete | None = None): ...
-    iconmask = wm_iconmask
-    def wm_iconname(self, newName: Incomplete | None = None) -> str: ...
-    iconname = wm_iconname
-    def wm_iconphoto(self, default: bool, image1: _PhotoImageLike | str, /, *args: _PhotoImageLike | str) -> None: ...
-    iconphoto = wm_iconphoto
-    def wm_iconposition(self, x: int | None = None, y: int | None = None) -> tuple[int, int] | None: ...
-    iconposition = wm_iconposition
-    def wm_iconwindow(self, pathName: Incomplete | None = None): ...
-    iconwindow = wm_iconwindow
-    def wm_manage(self, widget) -> None: ...
-    manage = wm_manage
-    @overload
-    def wm_maxsize(self, width: None = None, height: None = None) -> tuple[int, int]: ...
-    @overload
-    def wm_maxsize(self, width: int, height: int) -> None: ...
-    maxsize = wm_maxsize
-    @overload
-    def wm_minsize(self, width: None = None, height: None = None) -> tuple[int, int]: ...
-    @overload
-    def wm_minsize(self, width: int, height: int) -> None: ...
-    minsize = wm_minsize
-    @overload
-    def wm_overrideredirect(self, boolean: None = None) -> bool | None: ...  # returns True or None
-    @overload
-    def wm_overrideredirect(self, boolean: bool) -> None: ...
-    overrideredirect = wm_overrideredirect
-    def wm_positionfrom(self, who: Literal["program", "user"] | None = None) -> Literal["", "program", "user"]: ...
-    positionfrom = wm_positionfrom
-    @overload
-    def wm_protocol(self, name: str, func: Callable[[], object] | str) -> None: ...
-    @overload
-    def wm_protocol(self, name: str, func: None = None) -> str: ...
-    @overload
-    def wm_protocol(self, name: None = None, func: None = None) -> tuple[str, ...]: ...
-    protocol = wm_protocol
-    @overload
-    def wm_resizable(self, width: None = None, height: None = None) -> tuple[bool, bool]: ...
-    @overload
-    def wm_resizable(self, width: bool, height: bool) -> None: ...
-    resizable = wm_resizable
-    def wm_sizefrom(self, who: Literal["program", "user"] | None = None) -> Literal["", "program", "user"]: ...
-    sizefrom = wm_sizefrom
-    @overload
-    def wm_state(self, newstate: None = None) -> str: ...
-    @overload
-    def wm_state(self, newstate: str) -> None: ...
-    state = wm_state
-    @overload
-    def wm_title(self, string: None = None) -> str: ...
-    @overload
-    def wm_title(self, string: str) -> None: ...
-    title = wm_title
-    @overload
-    def wm_transient(self, master: None = None) -> _tkinter.Tcl_Obj: ...
-    @overload
-    def wm_transient(self, master: Wm | _tkinter.Tcl_Obj) -> None: ...
-    transient = wm_transient
-    def wm_withdraw(self) -> None: ...
-    withdraw = wm_withdraw
-
-class Tk(Misc, Wm):
-    master: None
-    def __init__(
-        # Make sure to keep in sync with other functions that use the same
-        # args.
-        # use `git grep screenName` to find them
-        self,
-        screenName: str | None = None,
-        baseName: str | None = None,
-        className: str = "Tk",
-        useTk: bool = True,
-        sync: bool = False,
-        use: str | None = None,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        menu: Menu = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        takefocus: _TakeFocusValue = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def destroy(self) -> None: ...
-    def readprofile(self, baseName: str, className: str) -> None: ...
-    report_callback_exception: Callable[[type[BaseException], BaseException, TracebackType | None], object]
-    # Tk has __getattr__ so that tk_instance.foo falls back to tk_instance.tk.foo
-    # Please keep in sync with _tkinter.TkappType.
-    # Some methods are intentionally missing because they are inherited from Misc instead.
-    def adderrorinfo(self, msg, /): ...
-    def call(self, command: Any, /, *args: Any) -> Any: ...
-    def createcommand(self, name, func, /): ...
-    if sys.platform != "win32":
-        def createfilehandler(self, file, mask, func, /): ...
-        def deletefilehandler(self, file, /): ...
-
-    def createtimerhandler(self, milliseconds, func, /): ...
-    def dooneevent(self, flags: int = ..., /): ...
-    def eval(self, script: str, /) -> str: ...
-    def evalfile(self, fileName, /): ...
-    def exprboolean(self, s, /): ...
-    def exprdouble(self, s, /): ...
-    def exprlong(self, s, /): ...
-    def exprstring(self, s, /): ...
-    def globalgetvar(self, *args, **kwargs): ...
-    def globalsetvar(self, *args, **kwargs): ...
-    def globalunsetvar(self, *args, **kwargs): ...
-    def interpaddr(self): ...
-    def loadtk(self) -> None: ...
-    def record(self, script, /): ...
-    if sys.version_info < (3, 11):
-        def split(self, arg, /): ...
-
-    def splitlist(self, arg, /): ...
-    def unsetvar(self, *args, **kwargs): ...
-    def wantobjects(self, *args, **kwargs): ...
-    def willdispatch(self): ...
-
-def Tcl(screenName: str | None = None, baseName: str | None = None, className: str = "Tk", useTk: bool = False) -> Tk: ...
-
-_InMiscTotal = TypedDict("_InMiscTotal", {"in": Misc})
-_InMiscNonTotal = TypedDict("_InMiscNonTotal", {"in": Misc}, total=False)
-
-class _PackInfo(_InMiscTotal):
-    # 'before' and 'after' never appear in _PackInfo
-    anchor: _Anchor
-    expand: bool
-    fill: Literal["none", "x", "y", "both"]
-    side: Literal["left", "right", "top", "bottom"]
-    # Paddings come out as int or tuple of int, even though any _ScreenUnits
-    # can be specified in pack().
-    ipadx: int
-    ipady: int
-    padx: int | tuple[int, int]
-    pady: int | tuple[int, int]
-
-class Pack:
-    # _PackInfo is not the valid type for cnf because pad stuff accepts any
-    # _ScreenUnits instead of int only. I didn't bother to create another
-    # TypedDict for cnf because it appears to be a legacy thing that was
-    # replaced by **kwargs.
-    def pack_configure(
-        self,
-        cnf: Mapping[str, Any] | None = {},
-        *,
-        after: Misc = ...,
-        anchor: _Anchor = ...,
-        before: Misc = ...,
-        expand: bool | Literal[0, 1] = 0,
-        fill: Literal["none", "x", "y", "both"] = ...,
-        side: Literal["left", "right", "top", "bottom"] = ...,
-        ipadx: _ScreenUnits = ...,
-        ipady: _ScreenUnits = ...,
-        padx: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
-        pady: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
-        in_: Misc = ...,
-        **kw: Any,  # allow keyword argument named 'in', see #4836
-    ) -> None: ...
-    def pack_forget(self) -> None: ...
-    def pack_info(self) -> _PackInfo: ...  # errors if widget hasn't been packed
-    pack = pack_configure
-    forget = pack_forget
-    propagate = Misc.pack_propagate
-
-class _PlaceInfo(_InMiscNonTotal):  # empty dict if widget hasn't been placed
-    anchor: _Anchor
-    bordermode: Literal["inside", "outside", "ignore"]
-    width: str  # can be int()ed (even after e.g. widget.place(height='2.3c') or similar)
-    height: str  # can be int()ed
-    x: str  # can be int()ed
-    y: str  # can be int()ed
-    relheight: str  # can be float()ed if not empty string
-    relwidth: str  # can be float()ed if not empty string
-    relx: str  # can be float()ed if not empty string
-    rely: str  # can be float()ed if not empty string
-
-class Place:
-    def place_configure(
-        self,
-        cnf: Mapping[str, Any] | None = {},
-        *,
-        anchor: _Anchor = ...,
-        bordermode: Literal["inside", "outside", "ignore"] = ...,
-        width: _ScreenUnits = ...,
-        height: _ScreenUnits = ...,
-        x: _ScreenUnits = ...,
-        y: _ScreenUnits = ...,
-        # str allowed for compatibility with place_info()
-        relheight: str | float = ...,
-        relwidth: str | float = ...,
-        relx: str | float = ...,
-        rely: str | float = ...,
-        in_: Misc = ...,
-        **kw: Any,  # allow keyword argument named 'in', see #4836
-    ) -> None: ...
-    def place_forget(self) -> None: ...
-    def place_info(self) -> _PlaceInfo: ...
-    place = place_configure
-    info = place_info
-
-class _GridInfo(_InMiscNonTotal):  # empty dict if widget hasn't been gridded
-    column: int
-    columnspan: int
-    row: int
-    rowspan: int
-    ipadx: int
-    ipady: int
-    padx: int | tuple[int, int]
-    pady: int | tuple[int, int]
-    sticky: str  # consists of letters 'n', 's', 'w', 'e', no repeats, may be empty
-
-class Grid:
-    def grid_configure(
-        self,
-        cnf: Mapping[str, Any] | None = {},
-        *,
-        column: int = ...,
-        columnspan: int = ...,
-        row: int = ...,
-        rowspan: int = ...,
-        ipadx: _ScreenUnits = ...,
-        ipady: _ScreenUnits = ...,
-        padx: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
-        pady: _ScreenUnits | tuple[_ScreenUnits, _ScreenUnits] = ...,
-        sticky: str = ...,  # consists of letters 'n', 's', 'w', 'e', may contain repeats, may be empty
-        in_: Misc = ...,
-        **kw: Any,  # allow keyword argument named 'in', see #4836
-    ) -> None: ...
-    def grid_forget(self) -> None: ...
-    def grid_remove(self) -> None: ...
-    def grid_info(self) -> _GridInfo: ...
-    grid = grid_configure
-    location = Misc.grid_location
-    size = Misc.grid_size
-
-class BaseWidget(Misc):
-    master: Misc
-    widgetName: Incomplete
-    def __init__(self, master, widgetName, cnf={}, kw={}, extra=()) -> None: ...
-    def destroy(self) -> None: ...
-
-# This class represents any widget except Toplevel or Tk.
-class Widget(BaseWidget, Pack, Place, Grid):
-    # Allow bind callbacks to take e.g. Event[Label] instead of Event[Misc].
-    # Tk and Toplevel get notified for their child widgets' events, but other
-    # widgets don't.
-    @overload
-    def bind(
-        self: _W,
-        sequence: str | None = None,
-        func: Callable[[Event[_W]], object] | None = None,
-        add: Literal["", "+"] | bool | None = None,
-    ) -> str: ...
-    @overload
-    def bind(self, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    @overload
-    def bind(self, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-
-class Toplevel(BaseWidget, Wm):
-    # Toplevel and Tk have the same options because they correspond to the same
-    # Tcl/Tk toplevel widget. For some reason, config and configure must be
-    # copy/pasted here instead of aliasing as 'config = Tk.config'.
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = 0,
-        bg: str = ...,
-        border: _ScreenUnits = 0,
-        borderwidth: _ScreenUnits = 0,
-        class_: str = "Toplevel",
-        colormap: Literal["new", ""] | Misc = "",
-        container: bool = False,
-        cursor: _Cursor = "",
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        menu: Menu = ...,
-        name: str = ...,
-        padx: _ScreenUnits = 0,
-        pady: _ScreenUnits = 0,
-        relief: _Relief = "flat",
-        screen: str = "",  # can't be changed after creating widget
-        takefocus: _TakeFocusValue = 0,
-        use: int = ...,
-        visual: str | tuple[str, int] = "",
-        width: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        menu: Menu = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        takefocus: _TakeFocusValue = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-
-class Button(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = "center",
-        background: str = ...,
-        bd: _ScreenUnits = ...,  # same as borderwidth
-        bg: str = ...,  # same as background
-        bitmap: str = "",
-        border: _ScreenUnits = ...,  # same as borderwidth
-        borderwidth: _ScreenUnits = ...,
-        command: _ButtonCommand = "",
-        compound: _Compound = "none",
-        cursor: _Cursor = "",
-        default: Literal["normal", "active", "disabled"] = "disabled",
-        disabledforeground: str = ...,
-        fg: str = ...,  # same as foreground
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        # width and height must be int for buttons containing just text, but
-        # ints are also valid _ScreenUnits
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 1,
-        image: _ImageSpec = "",
-        justify: Literal["left", "center", "right"] = "center",
-        name: str = ...,
-        overrelief: _Relief | Literal[""] = "",
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        repeatdelay: int = ...,
-        repeatinterval: int = ...,
-        state: Literal["normal", "active", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        text: float | str = "",
-        # We allow the textvariable to be any Variable, not necessarily
-        # StringVar. This is useful for e.g. a button that displays the value
-        # of an IntVar.
-        textvariable: Variable = ...,
-        underline: int = -1,
-        width: _ScreenUnits = 0,
-        wraplength: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: _ButtonCommand = ...,
-        compound: _Compound = ...,
-        cursor: _Cursor = ...,
-        default: Literal["normal", "active", "disabled"] = ...,
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        image: _ImageSpec = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        overrelief: _Relief | Literal[""] = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        repeatdelay: int = ...,
-        repeatinterval: int = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        textvariable: Variable = ...,
-        underline: int = ...,
-        width: _ScreenUnits = ...,
-        wraplength: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def flash(self) -> None: ...
-    def invoke(self) -> Any: ...
-
-class Canvas(Widget, XView, YView):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = 0,
-        bg: str = ...,
-        border: _ScreenUnits = 0,
-        borderwidth: _ScreenUnits = 0,
-        closeenough: float = 1.0,
-        confine: bool = True,
-        cursor: _Cursor = "",
-        # canvas manual page has a section named COORDINATES, and the first
-        # part of it describes _ScreenUnits.
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = 0,
-        insertofftime: int = 300,
-        insertontime: int = 600,
-        insertwidth: _ScreenUnits = 2,
-        name: str = ...,
-        offset=...,  # undocumented
-        relief: _Relief = "flat",
-        # Setting scrollregion to None doesn't reset it back to empty,
-        # but setting it to () does.
-        scrollregion: tuple[_ScreenUnits, _ScreenUnits, _ScreenUnits, _ScreenUnits] | tuple[()] = (),
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = 1,
-        selectforeground: str = ...,
-        # man page says that state can be 'hidden', but it can't
-        state: Literal["normal", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        width: _ScreenUnits = ...,
-        xscrollcommand: _XYScrollCommand = "",
-        xscrollincrement: _ScreenUnits = 0,
-        yscrollcommand: _XYScrollCommand = "",
-        yscrollincrement: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        closeenough: float = ...,
-        confine: bool = ...,
-        cursor: _Cursor = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = ...,
-        insertofftime: int = ...,
-        insertontime: int = ...,
-        insertwidth: _ScreenUnits = ...,
-        offset=...,  # undocumented
-        relief: _Relief = ...,
-        scrollregion: tuple[_ScreenUnits, _ScreenUnits, _ScreenUnits, _ScreenUnits] | tuple[()] = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        state: Literal["normal", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        width: _ScreenUnits = ...,
-        xscrollcommand: _XYScrollCommand = ...,
-        xscrollincrement: _ScreenUnits = ...,
-        yscrollcommand: _XYScrollCommand = ...,
-        yscrollincrement: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def addtag(self, *args): ...  # internal method
-    def addtag_above(self, newtag: str, tagOrId: str | int) -> None: ...
-    def addtag_all(self, newtag: str) -> None: ...
-    def addtag_below(self, newtag: str, tagOrId: str | int) -> None: ...
-    def addtag_closest(
-        self, newtag: str, x: _ScreenUnits, y: _ScreenUnits, halo: _ScreenUnits | None = None, start: str | int | None = None
-    ) -> None: ...
-    def addtag_enclosed(self, newtag: str, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: _ScreenUnits) -> None: ...
-    def addtag_overlapping(self, newtag: str, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: _ScreenUnits) -> None: ...
-    def addtag_withtag(self, newtag: str, tagOrId: str | int) -> None: ...
-    def find(self, *args): ...  # internal method
-    def find_above(self, tagOrId: str | int) -> tuple[int, ...]: ...
-    def find_all(self) -> tuple[int, ...]: ...
-    def find_below(self, tagOrId: str | int) -> tuple[int, ...]: ...
-    def find_closest(
-        self, x: _ScreenUnits, y: _ScreenUnits, halo: _ScreenUnits | None = None, start: str | int | None = None
-    ) -> tuple[int, ...]: ...
-    def find_enclosed(self, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: _ScreenUnits) -> tuple[int, ...]: ...
-    def find_overlapping(self, x1: _ScreenUnits, y1: _ScreenUnits, x2: _ScreenUnits, y2: float) -> tuple[int, ...]: ...
-    def find_withtag(self, tagOrId: str | int) -> tuple[int, ...]: ...
-    # Incompatible with Misc.bbox(), tkinter violates LSP
-    def bbox(self, *args: str | int) -> tuple[int, int, int, int]: ...  # type: ignore[override]
-    @overload
-    def tag_bind(
-        self,
-        tagOrId: str | int,
-        sequence: str | None = None,
-        func: Callable[[Event[Canvas]], object] | None = None,
-        add: Literal["", "+"] | bool | None = None,
-    ) -> str: ...
-    @overload
-    def tag_bind(
-        self, tagOrId: str | int, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None
-    ) -> None: ...
-    @overload
-    def tag_bind(self, tagOrId: str | int, *, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    def tag_unbind(self, tagOrId: str | int, sequence: str, funcid: str | None = None) -> None: ...
-    def canvasx(self, screenx, gridspacing: Incomplete | None = None): ...
-    def canvasy(self, screeny, gridspacing: Incomplete | None = None): ...
-    @overload
-    def coords(self, tagOrId: str | int, /) -> list[float]: ...
-    @overload
-    def coords(self, tagOrId: str | int, args: list[int] | list[float] | tuple[float, ...], /) -> None: ...
-    @overload
-    def coords(self, tagOrId: str | int, x1: float, y1: float, /, *args: float) -> None: ...
-    # create_foo() methods accept coords as a list or tuple, or as separate arguments.
-    # Lists and tuples can be flat as in [1, 2, 3, 4], or nested as in [(1, 2), (3, 4)].
-    # Keyword arguments should be the same in all overloads of each method.
-    def create_arc(self, *args, **kw) -> int: ...
-    def create_bitmap(self, *args, **kw) -> int: ...
-    def create_image(self, *args, **kw) -> int: ...
-    @overload
-    def create_line(
-        self,
-        x0: float,
-        y0: float,
-        x1: float,
-        y1: float,
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        arrow: Literal["first", "last", "both"] = ...,
-        arrowshape: tuple[float, float, float] = ...,
-        capstyle: Literal["round", "projecting", "butt"] = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        joinstyle: Literal["round", "bevel", "miter"] = ...,
-        offset: _ScreenUnits = ...,
-        smooth: bool = ...,
-        splinesteps: float = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_line(
-        self,
-        xy_pair_0: tuple[float, float],
-        xy_pair_1: tuple[float, float],
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        arrow: Literal["first", "last", "both"] = ...,
-        arrowshape: tuple[float, float, float] = ...,
-        capstyle: Literal["round", "projecting", "butt"] = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        joinstyle: Literal["round", "bevel", "miter"] = ...,
-        offset: _ScreenUnits = ...,
-        smooth: bool = ...,
-        splinesteps: float = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_line(
-        self,
-        coords: (
-            tuple[float, float, float, float]
-            | tuple[tuple[float, float], tuple[float, float]]
-            | list[int]
-            | list[float]
-            | list[tuple[int, int]]
-            | list[tuple[float, float]]
-        ),
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        arrow: Literal["first", "last", "both"] = ...,
-        arrowshape: tuple[float, float, float] = ...,
-        capstyle: Literal["round", "projecting", "butt"] = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        joinstyle: Literal["round", "bevel", "miter"] = ...,
-        offset: _ScreenUnits = ...,
-        smooth: bool = ...,
-        splinesteps: float = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_oval(
-        self,
-        x0: float,
-        y0: float,
-        x1: float,
-        y1: float,
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_oval(
-        self,
-        xy_pair_0: tuple[float, float],
-        xy_pair_1: tuple[float, float],
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_oval(
-        self,
-        coords: (
-            tuple[float, float, float, float]
-            | tuple[tuple[float, float], tuple[float, float]]
-            | list[int]
-            | list[float]
-            | list[tuple[int, int]]
-            | list[tuple[float, float]]
-        ),
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_polygon(
-        self,
-        x0: float,
-        y0: float,
-        x1: float,
-        y1: float,
-        /,
-        *xy_pairs: float,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        joinstyle: Literal["round", "bevel", "miter"] = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        smooth: bool = ...,
-        splinesteps: float = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_polygon(
-        self,
-        xy_pair_0: tuple[float, float],
-        xy_pair_1: tuple[float, float],
-        /,
-        *xy_pairs: tuple[float, float],
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        joinstyle: Literal["round", "bevel", "miter"] = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        smooth: bool = ...,
-        splinesteps: float = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_polygon(
-        self,
-        coords: (
-            tuple[float, ...]
-            | tuple[tuple[float, float], ...]
-            | list[int]
-            | list[float]
-            | list[tuple[int, int]]
-            | list[tuple[float, float]]
-        ),
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        joinstyle: Literal["round", "bevel", "miter"] = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        smooth: bool = ...,
-        splinesteps: float = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_rectangle(
-        self,
-        x0: float,
-        y0: float,
-        x1: float,
-        y1: float,
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_rectangle(
-        self,
-        xy_pair_0: tuple[float, float],
-        xy_pair_1: tuple[float, float],
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_rectangle(
-        self,
-        coords: (
-            tuple[float, float, float, float]
-            | tuple[tuple[float, float], tuple[float, float]]
-            | list[int]
-            | list[float]
-            | list[tuple[int, int]]
-            | list[tuple[float, float]]
-        ),
-        /,
-        *,
-        activedash: str | int | list[int] | tuple[int, ...] = ...,
-        activefill: str = ...,
-        activeoutline: str = ...,
-        activeoutlinestipple: str = ...,
-        activestipple: str = ...,
-        activewidth: _ScreenUnits = ...,
-        dash: str | int | list[int] | tuple[int, ...] = ...,
-        dashoffset: _ScreenUnits = ...,
-        disableddash: str | int | list[int] | tuple[int, ...] = ...,
-        disabledfill: str = ...,
-        disabledoutline: str = ...,
-        disabledoutlinestipple: str = ...,
-        disabledstipple: str = ...,
-        disabledwidth: _ScreenUnits = ...,
-        fill: str = ...,
-        offset: _ScreenUnits = ...,
-        outline: str = ...,
-        outlineoffset: _ScreenUnits = ...,
-        outlinestipple: str = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_text(
-        self,
-        x: float,
-        y: float,
-        /,
-        *,
-        activefill: str = ...,
-        activestipple: str = ...,
-        anchor: _Anchor = ...,
-        angle: float | str = ...,
-        disabledfill: str = ...,
-        disabledstipple: str = ...,
-        fill: str = ...,
-        font: _FontDescription = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        offset: _ScreenUnits = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        text: float | str = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_text(
-        self,
-        coords: tuple[float, float] | list[int] | list[float],
-        /,
-        *,
-        activefill: str = ...,
-        activestipple: str = ...,
-        anchor: _Anchor = ...,
-        angle: float | str = ...,
-        disabledfill: str = ...,
-        disabledstipple: str = ...,
-        fill: str = ...,
-        font: _FontDescription = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        offset: _ScreenUnits = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        stipple: str = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        text: float | str = ...,
-        width: _ScreenUnits = ...,
-    ) -> int: ...
-    @overload
-    def create_window(
-        self,
-        x: float,
-        y: float,
-        /,
-        *,
-        anchor: _Anchor = ...,
-        height: _ScreenUnits = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-        window: Widget = ...,
-    ) -> int: ...
-    @overload
-    def create_window(
-        self,
-        coords: tuple[float, float] | list[int] | list[float],
-        /,
-        *,
-        anchor: _Anchor = ...,
-        height: _ScreenUnits = ...,
-        state: Literal["normal", "hidden", "disabled"] = ...,
-        tags: str | list[str] | tuple[str, ...] = ...,
-        width: _ScreenUnits = ...,
-        window: Widget = ...,
-    ) -> int: ...
-    def dchars(self, *args) -> None: ...
-    def delete(self, *tagsOrCanvasIds: str | int) -> None: ...
-    @overload
-    def dtag(self, tag: str, tag_to_delete: str | None = ..., /) -> None: ...
-    @overload
-    def dtag(self, id: int, tag_to_delete: str, /) -> None: ...
-    def focus(self, *args): ...
-    def gettags(self, tagOrId: str | int, /) -> tuple[str, ...]: ...
-    def icursor(self, *args) -> None: ...
-    def index(self, *args): ...
-    def insert(self, *args) -> None: ...
-    def itemcget(self, tagOrId, option): ...
-    # itemconfigure kwargs depend on item type, which is not known when type checking
-    def itemconfigure(
-        self, tagOrId: str | int, cnf: dict[str, Any] | None = None, **kw: Any
-    ) -> dict[str, tuple[str, str, str, str, str]] | None: ...
-    itemconfig = itemconfigure
-    def move(self, *args) -> None: ...
-    def moveto(self, tagOrId: str | int, x: Literal[""] | float = "", y: Literal[""] | float = "") -> None: ...
-    def postscript(self, cnf={}, **kw): ...
-    # tkinter does:
-    #    lower = tag_lower
-    #    lift = tkraise = tag_raise
-    #
-    # But mypy doesn't like aliasing here (maybe because Misc defines the same names)
-    def tag_lower(self, first: str | int, second: str | int | None = ..., /) -> None: ...
-    def lower(self, first: str | int, second: str | int | None = ..., /) -> None: ...  # type: ignore[override]
-    def tag_raise(self, first: str | int, second: str | int | None = ..., /) -> None: ...
-    def tkraise(self, first: str | int, second: str | int | None = ..., /) -> None: ...  # type: ignore[override]
-    def lift(self, first: str | int, second: str | int | None = ..., /) -> None: ...  # type: ignore[override]
-    def scale(
-        self, tagOrId: str | int, xOrigin: _ScreenUnits, yOrigin: _ScreenUnits, xScale: float, yScale: float, /
-    ) -> None: ...
-    def scan_mark(self, x, y) -> None: ...
-    def scan_dragto(self, x, y, gain: int = 10) -> None: ...
-    def select_adjust(self, tagOrId, index) -> None: ...
-    def select_clear(self) -> None: ...
-    def select_from(self, tagOrId, index) -> None: ...
-    def select_item(self): ...
-    def select_to(self, tagOrId, index) -> None: ...
-    def type(self, tagOrId: str | int) -> int | None: ...
-
-class Checkbutton(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = "center",
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = "",
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: _ButtonCommand = "",
-        compound: _Compound = "none",
-        cursor: _Cursor = "",
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 1,
-        image: _ImageSpec = "",
-        indicatoron: bool = True,
-        justify: Literal["left", "center", "right"] = "center",
-        name: str = ...,
-        offrelief: _Relief = ...,
-        # The checkbutton puts a value to its variable when it's checked or
-        # unchecked. We don't restrict the type of that value here, so
-        # Any-typing is fine.
-        #
-        # I think Checkbutton shouldn't be generic, because then specifying
-        # "any checkbutton regardless of what variable it uses" would be
-        # difficult, and we might run into issues just like how list[float]
-        # and list[int] are incompatible. Also, we would need a way to
-        # specify "Checkbutton not associated with any variable", which is
-        # done by setting variable to empty string (the default).
-        offvalue: Any = 0,
-        onvalue: Any = 1,
-        overrelief: _Relief | Literal[""] = "",
-        padx: _ScreenUnits = 1,
-        pady: _ScreenUnits = 1,
-        relief: _Relief = "flat",
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = "",
-        state: Literal["normal", "active", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        text: float | str = "",
-        textvariable: Variable = ...,
-        tristateimage: _ImageSpec = "",
-        tristatevalue: Any = "",
-        underline: int = -1,
-        variable: Variable | Literal[""] = ...,
-        width: _ScreenUnits = 0,
-        wraplength: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: _ButtonCommand = ...,
-        compound: _Compound = ...,
-        cursor: _Cursor = ...,
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        offrelief: _Relief = ...,
-        offvalue: Any = ...,
-        onvalue: Any = ...,
-        overrelief: _Relief | Literal[""] = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        textvariable: Variable = ...,
-        tristateimage: _ImageSpec = ...,
-        tristatevalue: Any = ...,
-        underline: int = ...,
-        variable: Variable | Literal[""] = ...,
-        width: _ScreenUnits = ...,
-        wraplength: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def deselect(self) -> None: ...
-    def flash(self) -> None: ...
-    def invoke(self) -> Any: ...
-    def select(self) -> None: ...
-    def toggle(self) -> None: ...
-
-class Entry(Widget, XView):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = "xterm",
-        disabledbackground: str = ...,
-        disabledforeground: str = ...,
-        exportselection: bool = True,
-        fg: str = ...,
-        font: _FontDescription = "TkTextFont",
-        foreground: str = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = 0,
-        insertofftime: int = 300,
-        insertontime: int = 600,
-        insertwidth: _ScreenUnits = ...,
-        invalidcommand: _EntryValidateCommand = "",
-        invcmd: _EntryValidateCommand = "",  # same as invalidcommand
-        justify: Literal["left", "center", "right"] = "left",
-        name: str = ...,
-        readonlybackground: str = ...,
-        relief: _Relief = "sunken",
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        show: str = "",
-        state: Literal["normal", "disabled", "readonly"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        textvariable: Variable = ...,
-        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = "none",
-        validatecommand: _EntryValidateCommand = "",
-        vcmd: _EntryValidateCommand = "",  # same as validatecommand
-        width: int = 20,
-        xscrollcommand: _XYScrollCommand = "",
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        disabledbackground: str = ...,
-        disabledforeground: str = ...,
-        exportselection: bool = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = ...,
-        insertofftime: int = ...,
-        insertontime: int = ...,
-        insertwidth: _ScreenUnits = ...,
-        invalidcommand: _EntryValidateCommand = ...,
-        invcmd: _EntryValidateCommand = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        readonlybackground: str = ...,
-        relief: _Relief = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        show: str = ...,
-        state: Literal["normal", "disabled", "readonly"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        textvariable: Variable = ...,
-        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = ...,
-        validatecommand: _EntryValidateCommand = ...,
-        vcmd: _EntryValidateCommand = ...,
-        width: int = ...,
-        xscrollcommand: _XYScrollCommand = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def delete(self, first: str | int, last: str | int | None = None) -> None: ...
-    def get(self) -> str: ...
-    def icursor(self, index: str | int) -> None: ...
-    def index(self, index: str | int) -> int: ...
-    def insert(self, index: str | int, string: str) -> None: ...
-    def scan_mark(self, x) -> None: ...
-    def scan_dragto(self, x) -> None: ...
-    def selection_adjust(self, index: str | int) -> None: ...
-    def selection_clear(self) -> None: ...  # type: ignore[override]
-    def selection_from(self, index: str | int) -> None: ...
-    def selection_present(self) -> bool: ...
-    def selection_range(self, start: str | int, end: str | int) -> None: ...
-    def selection_to(self, index: str | int) -> None: ...
-    select_adjust = selection_adjust
-    select_clear = selection_clear
-    select_from = selection_from
-    select_present = selection_present
-    select_range = selection_range
-    select_to = selection_to
-
-class Frame(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = 0,
-        bg: str = ...,
-        border: _ScreenUnits = 0,
-        borderwidth: _ScreenUnits = 0,
-        class_: str = "Frame",  # can't be changed with configure()
-        colormap: Literal["new", ""] | Misc = "",  # can't be changed with configure()
-        container: bool = False,  # can't be changed with configure()
-        cursor: _Cursor = "",
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        name: str = ...,
-        padx: _ScreenUnits = 0,
-        pady: _ScreenUnits = 0,
-        relief: _Relief = "flat",
-        takefocus: _TakeFocusValue = 0,
-        visual: str | tuple[str, int] = "",  # can't be changed with configure()
-        width: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        takefocus: _TakeFocusValue = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-
-class Label(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = "center",
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = "",
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        compound: _Compound = "none",
-        cursor: _Cursor = "",
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        image: _ImageSpec = "",
-        justify: Literal["left", "center", "right"] = "center",
-        name: str = ...,
-        padx: _ScreenUnits = 1,
-        pady: _ScreenUnits = 1,
-        relief: _Relief = "flat",
-        state: Literal["normal", "active", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = 0,
-        text: float | str = "",
-        textvariable: Variable = ...,
-        underline: int = -1,
-        width: _ScreenUnits = 0,
-        wraplength: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        compound: _Compound = ...,
-        cursor: _Cursor = ...,
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        image: _ImageSpec = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        textvariable: Variable = ...,
-        underline: int = ...,
-        width: _ScreenUnits = ...,
-        wraplength: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-
-class Listbox(Widget, XView, YView):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activestyle: Literal["dotbox", "none", "underline"] = ...,
-        background: str = ...,
-        bd: _ScreenUnits = 1,
-        bg: str = ...,
-        border: _ScreenUnits = 1,
-        borderwidth: _ScreenUnits = 1,
-        cursor: _Cursor = "",
-        disabledforeground: str = ...,
-        exportselection: bool | Literal[0, 1] = 1,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: int = 10,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        justify: Literal["left", "center", "right"] = "left",
-        # There's no tkinter.ListVar, but seems like bare tkinter.Variable
-        # actually works for this:
-        #
-        #    >>> import tkinter
-        #    >>> lb = tkinter.Listbox()
-        #    >>> var = lb['listvariable'] = tkinter.Variable()
-        #    >>> var.set(['foo', 'bar', 'baz'])
-        #    >>> lb.get(0, 'end')
-        #    ('foo', 'bar', 'baz')
-        listvariable: Variable = ...,
-        name: str = ...,
-        relief: _Relief = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = 0,
-        selectforeground: str = ...,
-        # from listbox man page: "The value of the [selectmode] option may be
-        # arbitrary, but the default bindings expect it to be ..."
-        #
-        # I have never seen anyone setting this to something else than what
-        # "the default bindings expect", but let's support it anyway.
-        selectmode: str = "browse",
-        setgrid: bool = False,
-        state: Literal["normal", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        width: int = 20,
-        xscrollcommand: _XYScrollCommand = "",
-        yscrollcommand: _XYScrollCommand = "",
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activestyle: Literal["dotbox", "none", "underline"] = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        disabledforeground: str = ...,
-        exportselection: bool = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: int = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        listvariable: Variable = ...,
-        relief: _Relief = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        selectmode: str = ...,
-        setgrid: bool = ...,
-        state: Literal["normal", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        width: int = ...,
-        xscrollcommand: _XYScrollCommand = ...,
-        yscrollcommand: _XYScrollCommand = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def activate(self, index: str | int) -> None: ...
-    def bbox(self, index: str | int) -> tuple[int, int, int, int] | None: ...  # type: ignore[override]
-    def curselection(self): ...
-    def delete(self, first: str | int, last: str | int | None = None) -> None: ...
-    def get(self, first: str | int, last: str | int | None = None): ...
-    def index(self, index: str | int) -> int: ...
-    def insert(self, index: str | int, *elements: str | float) -> None: ...
-    def nearest(self, y): ...
-    def scan_mark(self, x, y) -> None: ...
-    def scan_dragto(self, x, y) -> None: ...
-    def see(self, index: str | int) -> None: ...
-    def selection_anchor(self, index: str | int) -> None: ...
-    select_anchor = selection_anchor
-    def selection_clear(self, first: str | int, last: str | int | None = None) -> None: ...  # type: ignore[override]
-    select_clear = selection_clear
-    def selection_includes(self, index: str | int): ...
-    select_includes = selection_includes
-    def selection_set(self, first: str | int, last: str | int | None = None) -> None: ...
-    select_set = selection_set
-    def size(self) -> int: ...  # type: ignore[override]
-    def itemcget(self, index: str | int, option): ...
-    def itemconfigure(self, index: str | int, cnf: Incomplete | None = None, **kw): ...
-    itemconfig = itemconfigure
-
-class Menu(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activeborderwidth: _ScreenUnits = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = "arrow",
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        name: str = ...,
-        postcommand: Callable[[], object] | str = "",
-        relief: _Relief = ...,
-        selectcolor: str = ...,
-        takefocus: _TakeFocusValue = 0,
-        tearoff: bool | Literal[0, 1] = 1,
-        # I guess tearoffcommand arguments are supposed to be widget objects,
-        # but they are widget name strings. Use nametowidget() to handle the
-        # arguments of tearoffcommand.
-        tearoffcommand: Callable[[str, str], object] | str = "",
-        title: str = "",
-        type: Literal["menubar", "tearoff", "normal"] = "normal",
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activeborderwidth: _ScreenUnits = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        postcommand: Callable[[], object] | str = ...,
-        relief: _Relief = ...,
-        selectcolor: str = ...,
-        takefocus: _TakeFocusValue = ...,
-        tearoff: bool = ...,
-        tearoffcommand: Callable[[str, str], object] | str = ...,
-        title: str = ...,
-        type: Literal["menubar", "tearoff", "normal"] = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def tk_popup(self, x: int, y: int, entry: str | int = "") -> None: ...
-    def activate(self, index: str | int) -> None: ...
-    def add(self, itemType, cnf={}, **kw): ...  # docstring says "Internal function."
-    def insert(self, index, itemType, cnf={}, **kw): ...  # docstring says "Internal function."
-    def add_cascade(
-        self,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        label: str = ...,
-        menu: Menu = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-    ) -> None: ...
-    def add_checkbutton(
-        self,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        label: str = ...,
-        offvalue: Any = ...,
-        onvalue: Any = ...,
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-        variable: Variable = ...,
-    ) -> None: ...
-    def add_command(
-        self,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        label: str = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-    ) -> None: ...
-    def add_radiobutton(
-        self,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        label: str = ...,
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-        value: Any = ...,
-        variable: Variable = ...,
-    ) -> None: ...
-    def add_separator(self, cnf: dict[str, Any] | None = {}, *, background: str = ...) -> None: ...
-    def insert_cascade(
-        self,
-        index: str | int,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        label: str = ...,
-        menu: Menu = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-    ) -> None: ...
-    def insert_checkbutton(
-        self,
-        index: str | int,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        label: str = ...,
-        offvalue: Any = ...,
-        onvalue: Any = ...,
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-        variable: Variable = ...,
-    ) -> None: ...
-    def insert_command(
-        self,
-        index: str | int,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        label: str = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-    ) -> None: ...
-    def insert_radiobutton(
-        self,
-        index: str | int,
-        cnf: dict[str, Any] | None = {},
-        *,
-        accelerator: str = ...,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        background: str = ...,
-        bitmap: str = ...,
-        columnbreak: int = ...,
-        command: Callable[[], object] | str = ...,
-        compound: _Compound = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        hidemargin: bool = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        label: str = ...,
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        underline: int = ...,
-        value: Any = ...,
-        variable: Variable = ...,
-    ) -> None: ...
-    def insert_separator(self, index: str | int, cnf: dict[str, Any] | None = {}, *, background: str = ...) -> None: ...
-    def delete(self, index1: str | int, index2: str | int | None = None) -> None: ...
-    def entrycget(self, index: str | int, option: str) -> Any: ...
-    def entryconfigure(
-        self, index: str | int, cnf: dict[str, Any] | None = None, **kw: Any
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    entryconfig = entryconfigure
-    def index(self, index: str | int) -> int | None: ...
-    def invoke(self, index: str | int) -> Any: ...
-    def post(self, x: int, y: int) -> None: ...
-    def type(self, index: str | int) -> Literal["cascade", "checkbutton", "command", "radiobutton", "separator"]: ...
-    def unpost(self) -> None: ...
-    def xposition(self, index: str | int) -> int: ...
-    def yposition(self, index: str | int) -> int: ...
-
-class Menubutton(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = "",
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        compound: _Compound = "none",
-        cursor: _Cursor = "",
-        direction: Literal["above", "below", "left", "right", "flush"] = "below",
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        image: _ImageSpec = "",
-        indicatoron: bool = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        menu: Menu = ...,
-        name: str = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = "flat",
-        state: Literal["normal", "active", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = 0,
-        text: float | str = "",
-        textvariable: Variable = ...,
-        underline: int = -1,
-        width: _ScreenUnits = 0,
-        wraplength: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        compound: _Compound = ...,
-        cursor: _Cursor = ...,
-        direction: Literal["above", "below", "left", "right", "flush"] = ...,
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        menu: Menu = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        textvariable: Variable = ...,
-        underline: int = ...,
-        width: _ScreenUnits = ...,
-        wraplength: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-
-class Message(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        anchor: _Anchor = "center",
-        aspect: int = 150,
-        background: str = ...,
-        bd: _ScreenUnits = 1,
-        bg: str = ...,
-        border: _ScreenUnits = 1,
-        borderwidth: _ScreenUnits = 1,
-        cursor: _Cursor = "",
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        justify: Literal["left", "center", "right"] = "left",
-        name: str = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = "flat",
-        takefocus: _TakeFocusValue = 0,
-        text: float | str = "",
-        textvariable: Variable = ...,
-        # there's width but no height
-        width: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        anchor: _Anchor = ...,
-        aspect: int = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        textvariable: Variable = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-
-class Radiobutton(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = "center",
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = "",
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: _ButtonCommand = "",
-        compound: _Compound = "none",
-        cursor: _Cursor = "",
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 1,
-        image: _ImageSpec = "",
-        indicatoron: bool = True,
-        justify: Literal["left", "center", "right"] = "center",
-        name: str = ...,
-        offrelief: _Relief = ...,
-        overrelief: _Relief | Literal[""] = "",
-        padx: _ScreenUnits = 1,
-        pady: _ScreenUnits = 1,
-        relief: _Relief = "flat",
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = "",
-        state: Literal["normal", "active", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        text: float | str = "",
-        textvariable: Variable = ...,
-        tristateimage: _ImageSpec = "",
-        tristatevalue: Any = "",
-        underline: int = -1,
-        value: Any = "",
-        variable: Variable | Literal[""] = ...,
-        width: _ScreenUnits = 0,
-        wraplength: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activeforeground: str = ...,
-        anchor: _Anchor = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bitmap: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: _ButtonCommand = ...,
-        compound: _Compound = ...,
-        cursor: _Cursor = ...,
-        disabledforeground: str = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        image: _ImageSpec = ...,
-        indicatoron: bool = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        offrelief: _Relief = ...,
-        overrelief: _Relief | Literal[""] = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        selectcolor: str = ...,
-        selectimage: _ImageSpec = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        textvariable: Variable = ...,
-        tristateimage: _ImageSpec = ...,
-        tristatevalue: Any = ...,
-        underline: int = ...,
-        value: Any = ...,
-        variable: Variable | Literal[""] = ...,
-        width: _ScreenUnits = ...,
-        wraplength: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def deselect(self) -> None: ...
-    def flash(self) -> None: ...
-    def invoke(self) -> Any: ...
-    def select(self) -> None: ...
-
-class Scale(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        background: str = ...,
-        bd: _ScreenUnits = 1,
-        bg: str = ...,
-        bigincrement: float = 0.0,
-        border: _ScreenUnits = 1,
-        borderwidth: _ScreenUnits = 1,
-        # don't know why the callback gets string instead of float
-        command: str | Callable[[str], object] = "",
-        cursor: _Cursor = "",
-        digits: int = 0,
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        from_: float = 0.0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        label: str = "",
-        length: _ScreenUnits = 100,
-        name: str = ...,
-        orient: Literal["horizontal", "vertical"] = "vertical",
-        relief: _Relief = "flat",
-        repeatdelay: int = 300,
-        repeatinterval: int = 100,
-        resolution: float = 1.0,
-        showvalue: bool = True,
-        sliderlength: _ScreenUnits = 30,
-        sliderrelief: _Relief = "raised",
-        state: Literal["normal", "active", "disabled"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        tickinterval: float = 0.0,
-        to: float = 100.0,
-        troughcolor: str = ...,
-        variable: IntVar | DoubleVar = ...,
-        width: _ScreenUnits = 15,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        bigincrement: float = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: str | Callable[[str], object] = ...,
-        cursor: _Cursor = ...,
-        digits: int = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        from_: float = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        label: str = ...,
-        length: _ScreenUnits = ...,
-        orient: Literal["horizontal", "vertical"] = ...,
-        relief: _Relief = ...,
-        repeatdelay: int = ...,
-        repeatinterval: int = ...,
-        resolution: float = ...,
-        showvalue: bool = ...,
-        sliderlength: _ScreenUnits = ...,
-        sliderrelief: _Relief = ...,
-        state: Literal["normal", "active", "disabled"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        tickinterval: float = ...,
-        to: float = ...,
-        troughcolor: str = ...,
-        variable: IntVar | DoubleVar = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def get(self) -> float: ...
-    def set(self, value) -> None: ...
-    def coords(self, value: float | None = None) -> tuple[int, int]: ...
-    def identify(self, x, y) -> Literal["", "slider", "trough1", "trough2"]: ...
-
-class Scrollbar(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        activerelief: _Relief = "raised",
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        # There are many ways how the command may get called. Search for
-        # 'SCROLLING COMMANDS' in scrollbar man page. There doesn't seem to
-        # be any way to specify an overloaded callback function, so we say
-        # that it can take any args while it can't in reality.
-        command: Callable[..., tuple[float, float] | None] | str = "",
-        cursor: _Cursor = "",
-        elementborderwidth: _ScreenUnits = -1,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        jump: bool = False,
-        name: str = ...,
-        orient: Literal["horizontal", "vertical"] = "vertical",
-        relief: _Relief = ...,
-        repeatdelay: int = 300,
-        repeatinterval: int = 100,
-        takefocus: _TakeFocusValue = "",
-        troughcolor: str = ...,
-        width: _ScreenUnits = ...,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        activerelief: _Relief = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        command: Callable[..., tuple[float, float] | None] | str = ...,
-        cursor: _Cursor = ...,
-        elementborderwidth: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        jump: bool = ...,
-        orient: Literal["horizontal", "vertical"] = ...,
-        relief: _Relief = ...,
-        repeatdelay: int = ...,
-        repeatinterval: int = ...,
-        takefocus: _TakeFocusValue = ...,
-        troughcolor: str = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def activate(self, index: Incomplete | None = None): ...
-    def delta(self, deltax: int, deltay: int) -> float: ...
-    def fraction(self, x: int, y: int) -> float: ...
-    def identify(self, x: int, y: int) -> Literal["arrow1", "arrow2", "slider", "trough1", "trough2", ""]: ...
-    def get(self) -> tuple[float, float, float, float] | tuple[float, float]: ...
-    def set(self, first: float | str, last: float | str) -> None: ...
-
-_TextIndex: TypeAlias = _tkinter.Tcl_Obj | str | float | Misc
-
-class Text(Widget, XView, YView):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        autoseparators: bool = True,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        blockcursor: bool = False,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = "xterm",
-        endline: int | Literal[""] = "",
-        exportselection: bool = True,
-        fg: str = ...,
-        font: _FontDescription = "TkFixedFont",
-        foreground: str = ...,
-        # width is always int, but height is allowed to be ScreenUnits.
-        # This doesn't make any sense to me, and this isn't documented.
-        # The docs seem to say that both should be integers.
-        height: _ScreenUnits = 24,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        inactiveselectbackground: str = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = 0,
-        insertofftime: int = 300,
-        insertontime: int = 600,
-        insertunfocussed: Literal["none", "hollow", "solid"] = "none",
-        insertwidth: _ScreenUnits = ...,
-        maxundo: int = 0,
-        name: str = ...,
-        padx: _ScreenUnits = 1,
-        pady: _ScreenUnits = 1,
-        relief: _Relief = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        setgrid: bool = False,
-        spacing1: _ScreenUnits = 0,
-        spacing2: _ScreenUnits = 0,
-        spacing3: _ScreenUnits = 0,
-        startline: int | Literal[""] = "",
-        state: Literal["normal", "disabled"] = "normal",
-        # Literal inside Tuple doesn't actually work
-        tabs: _ScreenUnits | str | tuple[_ScreenUnits | str, ...] = "",
-        tabstyle: Literal["tabular", "wordprocessor"] = "tabular",
-        takefocus: _TakeFocusValue = "",
-        undo: bool = False,
-        width: int = 80,
-        wrap: Literal["none", "char", "word"] = "char",
-        xscrollcommand: _XYScrollCommand = "",
-        yscrollcommand: _XYScrollCommand = "",
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        autoseparators: bool = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        blockcursor: bool = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        endline: int | Literal[""] = ...,
-        exportselection: bool = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        inactiveselectbackground: str = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = ...,
-        insertofftime: int = ...,
-        insertontime: int = ...,
-        insertunfocussed: Literal["none", "hollow", "solid"] = ...,
-        insertwidth: _ScreenUnits = ...,
-        maxundo: int = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        setgrid: bool = ...,
-        spacing1: _ScreenUnits = ...,
-        spacing2: _ScreenUnits = ...,
-        spacing3: _ScreenUnits = ...,
-        startline: int | Literal[""] = ...,
-        state: Literal["normal", "disabled"] = ...,
-        tabs: _ScreenUnits | str | tuple[_ScreenUnits | str, ...] = ...,
-        tabstyle: Literal["tabular", "wordprocessor"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        undo: bool = ...,
-        width: int = ...,
-        wrap: Literal["none", "char", "word"] = ...,
-        xscrollcommand: _XYScrollCommand = ...,
-        yscrollcommand: _XYScrollCommand = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def bbox(self, index: _TextIndex) -> tuple[int, int, int, int] | None: ...  # type: ignore[override]
-    def compare(self, index1: _TextIndex, op: Literal["<", "<=", "==", ">=", ">", "!="], index2: _TextIndex) -> bool: ...
-    def count(self, index1, index2, *args): ...  # TODO
-    @overload
-    def debug(self, boolean: None = None) -> bool: ...
-    @overload
-    def debug(self, boolean: bool) -> None: ...
-    def delete(self, index1: _TextIndex, index2: _TextIndex | None = None) -> None: ...
-    def dlineinfo(self, index: _TextIndex) -> tuple[int, int, int, int, int] | None: ...
-    @overload
-    def dump(
-        self,
-        index1: _TextIndex,
-        index2: _TextIndex | None = None,
-        command: None = None,
-        *,
-        all: bool = ...,
-        image: bool = ...,
-        mark: bool = ...,
-        tag: bool = ...,
-        text: bool = ...,
-        window: bool = ...,
-    ) -> list[tuple[str, str, str]]: ...
-    @overload
-    def dump(
-        self,
-        index1: _TextIndex,
-        index2: _TextIndex | None,
-        command: Callable[[str, str, str], object] | str,
-        *,
-        all: bool = ...,
-        image: bool = ...,
-        mark: bool = ...,
-        tag: bool = ...,
-        text: bool = ...,
-        window: bool = ...,
-    ) -> None: ...
-    @overload
-    def dump(
-        self,
-        index1: _TextIndex,
-        index2: _TextIndex | None = None,
-        *,
-        command: Callable[[str, str, str], object] | str,
-        all: bool = ...,
-        image: bool = ...,
-        mark: bool = ...,
-        tag: bool = ...,
-        text: bool = ...,
-        window: bool = ...,
-    ) -> None: ...
-    def edit(self, *args): ...  # docstring says "Internal method"
-    @overload
-    def edit_modified(self, arg: None = None) -> bool: ...  # actually returns Literal[0, 1]
-    @overload
-    def edit_modified(self, arg: bool) -> None: ...  # actually returns empty string
-    def edit_redo(self) -> None: ...  # actually returns empty string
-    def edit_reset(self) -> None: ...  # actually returns empty string
-    def edit_separator(self) -> None: ...  # actually returns empty string
-    def edit_undo(self) -> None: ...  # actually returns empty string
-    def get(self, index1: _TextIndex, index2: _TextIndex | None = None) -> str: ...
-    @overload
-    def image_cget(self, index: _TextIndex, option: Literal["image", "name"]) -> str: ...
-    @overload
-    def image_cget(self, index: _TextIndex, option: Literal["padx", "pady"]) -> int: ...
-    @overload
-    def image_cget(self, index: _TextIndex, option: Literal["align"]) -> Literal["baseline", "bottom", "center", "top"]: ...
-    @overload
-    def image_cget(self, index: _TextIndex, option: str) -> Any: ...
-    @overload
-    def image_configure(self, index: _TextIndex, cnf: str) -> tuple[str, str, str, str, str | int]: ...
-    @overload
-    def image_configure(
-        self,
-        index: _TextIndex,
-        cnf: dict[str, Any] | None = {},
-        *,
-        align: Literal["baseline", "bottom", "center", "top"] = ...,
-        image: _ImageSpec = ...,
-        name: str = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, str, str | int]] | None: ...
-    def image_create(
-        self,
-        index: _TextIndex,
-        cnf: dict[str, Any] | None = {},
-        *,
-        align: Literal["baseline", "bottom", "center", "top"] = ...,
-        image: _ImageSpec = ...,
-        name: str = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-    ) -> str: ...
-    def image_names(self) -> tuple[str, ...]: ...
-    def index(self, index: _TextIndex) -> str: ...
-    def insert(self, index: _TextIndex, chars: str, *args: str | list[str] | tuple[str, ...]) -> None: ...
-    @overload
-    def mark_gravity(self, markName: str, direction: None = None) -> Literal["left", "right"]: ...
-    @overload
-    def mark_gravity(self, markName: str, direction: Literal["left", "right"]) -> None: ...  # actually returns empty string
-    def mark_names(self) -> tuple[str, ...]: ...
-    def mark_set(self, markName: str, index: _TextIndex) -> None: ...
-    def mark_unset(self, *markNames: str) -> None: ...
-    def mark_next(self, index: _TextIndex) -> str | None: ...
-    def mark_previous(self, index: _TextIndex) -> str | None: ...
-    # **kw of peer_create is same as the kwargs of Text.__init__
-    def peer_create(self, newPathName: str | Text, cnf: dict[str, Any] = {}, **kw) -> None: ...
-    def peer_names(self) -> tuple[_tkinter.Tcl_Obj, ...]: ...
-    def replace(self, index1: _TextIndex, index2: _TextIndex, chars: str, *args: str | list[str] | tuple[str, ...]) -> None: ...
-    def scan_mark(self, x: int, y: int) -> None: ...
-    def scan_dragto(self, x: int, y: int) -> None: ...
-    def search(
-        self,
-        pattern: str,
-        index: _TextIndex,
-        stopindex: _TextIndex | None = None,
-        forwards: bool | None = None,
-        backwards: bool | None = None,
-        exact: bool | None = None,
-        regexp: bool | None = None,
-        nocase: bool | None = None,
-        count: Variable | None = None,
-        elide: bool | None = None,
-    ) -> str: ...  # returns empty string for not found
-    def see(self, index: _TextIndex) -> None: ...
-    def tag_add(self, tagName: str, index1: _TextIndex, *args: _TextIndex) -> None: ...
-    # tag_bind stuff is very similar to Canvas
-    @overload
-    def tag_bind(
-        self,
-        tagName: str,
-        sequence: str | None,
-        func: Callable[[Event[Text]], object] | None,
-        add: Literal["", "+"] | bool | None = None,
-    ) -> str: ...
-    @overload
-    def tag_bind(self, tagName: str, sequence: str | None, func: str, add: Literal["", "+"] | bool | None = None) -> None: ...
-    def tag_unbind(self, tagName: str, sequence: str, funcid: str | None = None) -> None: ...
-    # allowing any string for cget instead of just Literals because there's no other way to look up tag options
-    def tag_cget(self, tagName: str, option: str): ...
-    @overload
-    def tag_configure(
-        self,
-        tagName: str,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bgstipple: str = ...,
-        borderwidth: _ScreenUnits = ...,
-        border: _ScreenUnits = ...,  # alias for borderwidth
-        elide: bool = ...,
-        fgstipple: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        justify: Literal["left", "right", "center"] = ...,
-        lmargin1: _ScreenUnits = ...,
-        lmargin2: _ScreenUnits = ...,
-        lmargincolor: str = ...,
-        offset: _ScreenUnits = ...,
-        overstrike: bool = ...,
-        overstrikefg: str = ...,
-        relief: _Relief = ...,
-        rmargin: _ScreenUnits = ...,
-        rmargincolor: str = ...,
-        selectbackground: str = ...,
-        selectforeground: str = ...,
-        spacing1: _ScreenUnits = ...,
-        spacing2: _ScreenUnits = ...,
-        spacing3: _ScreenUnits = ...,
-        tabs: Any = ...,  # the exact type is kind of complicated, see manual page
-        tabstyle: Literal["tabular", "wordprocessor"] = ...,
-        underline: bool = ...,
-        underlinefg: str = ...,
-        wrap: Literal["none", "char", "word"] = ...,  # be careful with "none" vs None
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def tag_configure(self, tagName: str, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    tag_config = tag_configure
-    def tag_delete(self, first_tag_name: str, /, *tagNames: str) -> None: ...  # error if no tag names given
-    def tag_lower(self, tagName: str, belowThis: str | None = None) -> None: ...
-    def tag_names(self, index: _TextIndex | None = None) -> tuple[str, ...]: ...
-    def tag_nextrange(
-        self, tagName: str, index1: _TextIndex, index2: _TextIndex | None = None
-    ) -> tuple[str, str] | tuple[()]: ...
-    def tag_prevrange(
-        self, tagName: str, index1: _TextIndex, index2: _TextIndex | None = None
-    ) -> tuple[str, str] | tuple[()]: ...
-    def tag_raise(self, tagName: str, aboveThis: str | None = None) -> None: ...
-    def tag_ranges(self, tagName: str) -> tuple[_tkinter.Tcl_Obj, ...]: ...
-    # tag_remove and tag_delete are different
-    def tag_remove(self, tagName: str, index1: _TextIndex, index2: _TextIndex | None = None) -> None: ...
-    @overload
-    def window_cget(self, index: _TextIndex, option: Literal["padx", "pady"]) -> int: ...
-    @overload
-    def window_cget(self, index: _TextIndex, option: Literal["stretch"]) -> bool: ...  # actually returns Literal[0, 1]
-    @overload
-    def window_cget(self, index: _TextIndex, option: Literal["align"]) -> Literal["baseline", "bottom", "center", "top"]: ...
-    @overload  # window is set to a widget, but read as the string name.
-    def window_cget(self, index: _TextIndex, option: Literal["create", "window"]) -> str: ...
-    @overload
-    def window_cget(self, index: _TextIndex, option: str) -> Any: ...
-    @overload
-    def window_configure(self, index: _TextIndex, cnf: str) -> tuple[str, str, str, str, str | int]: ...
-    @overload
-    def window_configure(
-        self,
-        index: _TextIndex,
-        cnf: dict[str, Any] | None = None,
-        *,
-        align: Literal["baseline", "bottom", "center", "top"] = ...,
-        create: str = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        stretch: bool | Literal[0, 1] = ...,
-        window: Misc | str = ...,
-    ) -> dict[str, tuple[str, str, str, str, str | int]] | None: ...
-    window_config = window_configure
-    def window_create(
-        self,
-        index: _TextIndex,
-        cnf: dict[str, Any] | None = {},
-        *,
-        align: Literal["baseline", "bottom", "center", "top"] = ...,
-        create: str = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        stretch: bool | Literal[0, 1] = ...,
-        window: Misc | str = ...,
-    ) -> None: ...
-    def window_names(self) -> tuple[str, ...]: ...
-    def yview_pickplace(self, *what): ...  # deprecated
-
-class _setit:
-    def __init__(self, var, value, callback: Incomplete | None = None) -> None: ...
-    def __call__(self, *args) -> None: ...
-
-# manual page: tk_optionMenu
-class OptionMenu(Menubutton):
-    widgetName: Incomplete
-    menuname: Incomplete
-    def __init__(
-        # differs from other widgets
-        self,
-        master: Misc | None,
-        variable: StringVar,
-        value: str,
-        *values: str,
-        # kwarg only from now on
-        command: Callable[[StringVar], object] | None = ...,
-    ) -> None: ...
-    # configure, config, cget are inherited from Menubutton
-    # destroy and __getitem__ are overridden, signature does not change
-
-# Marker to indicate that it is a valid bitmap/photo image. PIL implements compatible versions
-# which don't share a class hierarchy. The actual API is a __str__() which returns a valid name,
-# not something that type checkers can detect.
-@type_check_only
-class _Image: ...
-
-@type_check_only
-class _BitmapImageLike(_Image): ...
-
-@type_check_only
-class _PhotoImageLike(_Image): ...
-
-class Image(_Image):
-    name: Incomplete
-    tk: _tkinter.TkappType
-    def __init__(
-        self, imgtype, name: Incomplete | None = None, cnf={}, master: Misc | _tkinter.TkappType | None = None, **kw
-    ) -> None: ...
-    def __del__(self) -> None: ...
-    def __setitem__(self, key, value) -> None: ...
-    def __getitem__(self, key): ...
-    configure: Incomplete
-    config: Incomplete
-    def height(self) -> int: ...
-    def type(self): ...
-    def width(self) -> int: ...
-
-class PhotoImage(Image, _PhotoImageLike):
-    # This should be kept in sync with PIL.ImageTK.PhotoImage.__init__()
-    def __init__(
-        self,
-        name: str | None = None,
-        cnf: dict[str, Any] = {},
-        master: Misc | _tkinter.TkappType | None = None,
-        *,
-        data: str | bytes = ...,  # not same as data argument of put()
-        format: str = ...,
-        file: StrOrBytesPath = ...,
-        gamma: float = ...,
-        height: int = ...,
-        palette: int | str = ...,
-        width: int = ...,
-    ) -> None: ...
-    def configure(
-        self,
-        *,
-        data: str | bytes = ...,
-        format: str = ...,
-        file: StrOrBytesPath = ...,
-        gamma: float = ...,
-        height: int = ...,
-        palette: int | str = ...,
-        width: int = ...,
-    ) -> None: ...
-    config = configure
-    def blank(self) -> None: ...
-    def cget(self, option: str) -> str: ...
-    def __getitem__(self, key: str) -> str: ...  # always string: image['height'] can be '0'
-    def copy(self) -> PhotoImage: ...
-    def zoom(self, x: int, y: int | Literal[""] = "") -> PhotoImage: ...
-    def subsample(self, x: int, y: int | Literal[""] = "") -> PhotoImage: ...
-    def get(self, x: int, y: int) -> tuple[int, int, int]: ...
-    def put(
-        self,
-        data: (
-            str
-            | list[str]
-            | list[list[str]]
-            | list[tuple[str, ...]]
-            | tuple[str, ...]
-            | tuple[list[str], ...]
-            | tuple[tuple[str, ...], ...]
-        ),
-        to: tuple[int, int] | None = None,
-    ) -> None: ...
-    def write(self, filename: StrOrBytesPath, format: str | None = None, from_coords: tuple[int, int] | None = None) -> None: ...
-    def transparency_get(self, x: int, y: int) -> bool: ...
-    def transparency_set(self, x: int, y: int, boolean: bool) -> None: ...
-
-class BitmapImage(Image, _BitmapImageLike):
-    # This should be kept in sync with PIL.ImageTK.BitmapImage.__init__()
-    def __init__(
-        self,
-        name: Incomplete | None = None,
-        cnf: dict[str, Any] = {},
-        master: Misc | _tkinter.TkappType | None = None,
-        *,
-        background: str = ...,
-        data: str | bytes = ...,
-        file: StrOrBytesPath = ...,
-        foreground: str = ...,
-        maskdata: str = ...,
-        maskfile: StrOrBytesPath = ...,
-    ) -> None: ...
-
-def image_names() -> tuple[str, ...]: ...
-def image_types() -> tuple[str, ...]: ...
-
-class Spinbox(Widget, XView):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        activebackground: str = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        buttonbackground: str = ...,
-        buttoncursor: _Cursor = "",
-        buttondownrelief: _Relief = ...,
-        buttonuprelief: _Relief = ...,
-        # percent substitutions don't seem to be supported, it's similar to Entry's validation stuff
-        command: Callable[[], object] | str | list[str] | tuple[str, ...] = "",
-        cursor: _Cursor = "xterm",
-        disabledbackground: str = ...,
-        disabledforeground: str = ...,
-        exportselection: bool = True,
-        fg: str = ...,
-        font: _FontDescription = "TkTextFont",
-        foreground: str = ...,
-        format: str = "",
-        from_: float = 0.0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        increment: float = 1.0,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = 0,
-        insertofftime: int = 300,
-        insertontime: int = 600,
-        insertwidth: _ScreenUnits = ...,
-        invalidcommand: _EntryValidateCommand = "",
-        invcmd: _EntryValidateCommand = "",
-        justify: Literal["left", "center", "right"] = "left",
-        name: str = ...,
-        readonlybackground: str = ...,
-        relief: _Relief = "sunken",
-        repeatdelay: int = 400,
-        repeatinterval: int = 100,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        state: Literal["normal", "disabled", "readonly"] = "normal",
-        takefocus: _TakeFocusValue = "",
-        textvariable: Variable = ...,
-        to: float = 0.0,
-        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = "none",
-        validatecommand: _EntryValidateCommand = "",
-        vcmd: _EntryValidateCommand = "",
-        values: list[str] | tuple[str, ...] = ...,
-        width: int = 20,
-        wrap: bool = False,
-        xscrollcommand: _XYScrollCommand = "",
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        activebackground: str = ...,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        buttonbackground: str = ...,
-        buttoncursor: _Cursor = ...,
-        buttondownrelief: _Relief = ...,
-        buttonuprelief: _Relief = ...,
-        command: Callable[[], object] | str | list[str] | tuple[str, ...] = ...,
-        cursor: _Cursor = ...,
-        disabledbackground: str = ...,
-        disabledforeground: str = ...,
-        exportselection: bool = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        format: str = ...,
-        from_: float = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        increment: float = ...,
-        insertbackground: str = ...,
-        insertborderwidth: _ScreenUnits = ...,
-        insertofftime: int = ...,
-        insertontime: int = ...,
-        insertwidth: _ScreenUnits = ...,
-        invalidcommand: _EntryValidateCommand = ...,
-        invcmd: _EntryValidateCommand = ...,
-        justify: Literal["left", "center", "right"] = ...,
-        readonlybackground: str = ...,
-        relief: _Relief = ...,
-        repeatdelay: int = ...,
-        repeatinterval: int = ...,
-        selectbackground: str = ...,
-        selectborderwidth: _ScreenUnits = ...,
-        selectforeground: str = ...,
-        state: Literal["normal", "disabled", "readonly"] = ...,
-        takefocus: _TakeFocusValue = ...,
-        textvariable: Variable = ...,
-        to: float = ...,
-        validate: Literal["none", "focus", "focusin", "focusout", "key", "all"] = ...,
-        validatecommand: _EntryValidateCommand = ...,
-        vcmd: _EntryValidateCommand = ...,
-        values: list[str] | tuple[str, ...] = ...,
-        width: int = ...,
-        wrap: bool = ...,
-        xscrollcommand: _XYScrollCommand = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def bbox(self, index) -> tuple[int, int, int, int] | None: ...  # type: ignore[override]
-    def delete(self, first, last: Incomplete | None = None) -> Literal[""]: ...
-    def get(self) -> str: ...
-    def icursor(self, index): ...
-    def identify(self, x: int, y: int) -> Literal["", "buttondown", "buttonup", "entry"]: ...
-    def index(self, index: str | int) -> int: ...
-    def insert(self, index: str | int, s: str) -> Literal[""]: ...
-    # spinbox.invoke("asdf") gives error mentioning .invoke("none"), but it's not documented
-    def invoke(self, element: Literal["none", "buttonup", "buttondown"]) -> Literal[""]: ...
-    def scan(self, *args): ...
-    def scan_mark(self, x): ...
-    def scan_dragto(self, x): ...
-    def selection(self, *args) -> tuple[int, ...]: ...
-    def selection_adjust(self, index): ...
-    def selection_clear(self): ...
-    def selection_element(self, element: Incomplete | None = None): ...
-    def selection_from(self, index: int) -> None: ...
-    def selection_present(self) -> None: ...
-    def selection_range(self, start: int, end: int) -> None: ...
-    def selection_to(self, index: int) -> None: ...
-
-class LabelFrame(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = 2,
-        bg: str = ...,
-        border: _ScreenUnits = 2,
-        borderwidth: _ScreenUnits = 2,
-        class_: str = "Labelframe",  # can't be changed with configure()
-        colormap: Literal["new", ""] | Misc = "",  # can't be changed with configure()
-        container: bool = False,  # undocumented, can't be changed with configure()
-        cursor: _Cursor = "",
-        fg: str = ...,
-        font: _FontDescription = "TkDefaultFont",
-        foreground: str = ...,
-        height: _ScreenUnits = 0,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = 0,
-        # 'ne' and 'en' are valid labelanchors, but only 'ne' is a valid _Anchor.
-        labelanchor: Literal["nw", "n", "ne", "en", "e", "es", "se", "s", "sw", "ws", "w", "wn"] = "nw",
-        labelwidget: Misc = ...,
-        name: str = ...,
-        padx: _ScreenUnits = 0,
-        pady: _ScreenUnits = 0,
-        relief: _Relief = "groove",
-        takefocus: _TakeFocusValue = 0,
-        text: float | str = "",
-        visual: str | tuple[str, int] = "",  # can't be changed with configure()
-        width: _ScreenUnits = 0,
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        fg: str = ...,
-        font: _FontDescription = ...,
-        foreground: str = ...,
-        height: _ScreenUnits = ...,
-        highlightbackground: str = ...,
-        highlightcolor: str = ...,
-        highlightthickness: _ScreenUnits = ...,
-        labelanchor: Literal["nw", "n", "ne", "en", "e", "es", "se", "s", "sw", "ws", "w", "wn"] = ...,
-        labelwidget: Misc = ...,
-        padx: _ScreenUnits = ...,
-        pady: _ScreenUnits = ...,
-        relief: _Relief = ...,
-        takefocus: _TakeFocusValue = ...,
-        text: float | str = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-
-class PanedWindow(Widget):
-    def __init__(
-        self,
-        master: Misc | None = None,
-        cnf: dict[str, Any] | None = {},
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = 1,
-        bg: str = ...,
-        border: _ScreenUnits = 1,
-        borderwidth: _ScreenUnits = 1,
-        cursor: _Cursor = "",
-        handlepad: _ScreenUnits = 8,
-        handlesize: _ScreenUnits = 8,
-        height: _ScreenUnits = "",
-        name: str = ...,
-        opaqueresize: bool = True,
-        orient: Literal["horizontal", "vertical"] = "horizontal",
-        proxybackground: str = "",
-        proxyborderwidth: _ScreenUnits = 2,
-        proxyrelief: _Relief = "flat",
-        relief: _Relief = "flat",
-        sashcursor: _Cursor = "",
-        sashpad: _ScreenUnits = 0,
-        sashrelief: _Relief = "flat",
-        sashwidth: _ScreenUnits = 3,
-        showhandle: bool = False,
-        width: _ScreenUnits = "",
-    ) -> None: ...
-    @overload
-    def configure(
-        self,
-        cnf: dict[str, Any] | None = None,
-        *,
-        background: str = ...,
-        bd: _ScreenUnits = ...,
-        bg: str = ...,
-        border: _ScreenUnits = ...,
-        borderwidth: _ScreenUnits = ...,
-        cursor: _Cursor = ...,
-        handlepad: _ScreenUnits = ...,
-        handlesize: _ScreenUnits = ...,
-        height: _ScreenUnits = ...,
-        opaqueresize: bool = ...,
-        orient: Literal["horizontal", "vertical"] = ...,
-        proxybackground: str = ...,
-        proxyborderwidth: _ScreenUnits = ...,
-        proxyrelief: _Relief = ...,
-        relief: _Relief = ...,
-        sashcursor: _Cursor = ...,
-        sashpad: _ScreenUnits = ...,
-        sashrelief: _Relief = ...,
-        sashwidth: _ScreenUnits = ...,
-        showhandle: bool = ...,
-        width: _ScreenUnits = ...,
-    ) -> dict[str, tuple[str, str, str, Any, Any]] | None: ...
-    @overload
-    def configure(self, cnf: str) -> tuple[str, str, str, Any, Any]: ...
-    config = configure
-    def add(self, child: Widget, **kw) -> None: ...
-    def remove(self, child) -> None: ...
-    forget: Incomplete
-    def identify(self, x: int, y: int): ...
-    def proxy(self, *args): ...
-    def proxy_coord(self): ...
-    def proxy_forget(self): ...
-    def proxy_place(self, x, y): ...
-    def sash(self, *args): ...
-    def sash_coord(self, index): ...
-    def sash_mark(self, index): ...
-    def sash_place(self, index, x, y): ...
-    def panecget(self, child, option): ...
-    def paneconfigure(self, tagOrId, cnf: Incomplete | None = None, **kw): ...
-    paneconfig: Incomplete
-    def panes(self): ...
-
-def _test() -> None: ...